Database Develop

[RECOVERY][UNOFFICIAL][STABLE] TWRP [S4 mini] v3.2.0-1 | Updated 2017-12-06

TWRP for S4 mini (GT-I9190 + GT-I9192 + GT-I9195)​v3.2.0-1 (STABLE)
+ v3.2.0-0 (TRYOUTs)
​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. TWRP also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
TeamWin was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After their work on the EVO 4G they wanted to work on a project that would work on more devices than just the EVO 4G and they settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
DISCLAIMER : TeamWin team and myself will never ever be responsible for any damage you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> TeamWin & OmniROM teams (TWRP tree).
-> CyanogenMod team (ROM + device + kernel trees).
-> @k2wl (DS device tree).
-> TheMuppets team (vendor tree).
NOTE : i am not affiliated with any of the teams mentioned above...
THANKS TO :
-> @F4k (for helping me a lot).
-> @Dees_Troy (for sharing some of his knowledge with me).
-> @arco68 (for helping me to restore the brightness control and crypto. features).
-> @thomson.aa (for sharing one way to fix TWRP booting process for S4 mini).
-> @alexax66 (for sharing early GT-I9192 TWRP builds which were based off one of mine).
-> @Xmaster24 (screenshots).
-> @noppy22 for testing crypto. features out.
INSTALLATION :
=> Option 1 : your device does not have any custom recovery yet ! Please download the 7zipped .tar.md5 file of your choice below, then flash it through Odin (windows OS).
=> Option 2 : a custom recovery has already been flashed to your device ! Please download the flashable .zip file of your choice below and flash it from recovery as usual.
BIG ORANGE WARNING : if you are coming from regular / PhilZ CWM or legacy TWRP, then please do prefer the Odin way ! Thank you !
QUICK ODIN HOWTO : assuming that your Odin installation for S4 mini is OK (thanks @arco68 for this) !
Turn your device OFF.
Press AND hold 'PWR' + 'VOL. DOWN' + 'HOME' buttons.
Connect your USB cable and press 'VOL. UP' button to confirm that you want to enter into DL mode.
Start Odin, uncheck "F. Reset Time", and then click 'AP' button.
Select my 'recovery.tar.md5' file that you previously extracted from my 7zip archive and press 'Start' button. The phone will reboot when finished.
When the phone begins to vibrate just before rebooting : IMMEDIATELY press and hold 'VOL. UP' + 'HOME' buttons to boot straightly into your new recovery. <= THIS LAST STEP IS NEEDED ONLY ON SOME S4 MINI DEVICES TO ACHIEVE THE FLASHING PROCESS SUCCESSFULLY.
DOWNLOADS :
=> STABLE branch : (NEW) 1 version per device built for stability, full crypto. support for both EXT4 and F2FS (fixed with @arco68 help, thanks !)... EXT4+F2FS; built along with LOS's NOUGAT ROM tree !
custom TWRP v3.2.0-1 OREO enabled for S4 mini (3G variant AKA GT-I9190) | STABLE (2017-12-06) :
=> Odin | recovery
custom TWRP v3.2.0-1 OREO enabled for S4 mini (DS variant AKA GT-I9192) | STABLE (2017-12-06) :
=> Odin | recovery
custom TWRP v3.2.0-1 OREO enabled for S4 mini (LTE variant AKA GT-I9195) | STABLE (2017-12-06) :
=> Odin | recovery
BIG ORANGE WARNING : please be aware that this build is failing with LOS''s recovery updating feature ATM...
=> DEV branch : no files ATM..., should be as stable as the regular one...
=> TRYOUTs : v3.2.0-0 (NEW) NEED TESTING !!! => see post #1582 for details...
TWRP CHANGELOG : please look at post #2
INFO : STABLE branch DOWNLOADS ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT.
NOTE : i've started building it for myself, now i'm sharing it ! Feel free to report back... Any feedback will ever be greatly appreciated !
NOTE : if you are interested in my work and download my files, please report back AND hit my 'THANKS!' button if you think i deserve it ! Thank you !​
PS : TWRP for S4 mini is available as three separate download categories : STABLE, DEV & TRYOUTS ! The DEV branch is based off the stable one and is including features that are not available in the STABLE one yet (as upstream not merged commits...) ! So the DEV branch is as stable as the STABLE one except for currently previewed features...​
Happy flashing !​
XDA:DevDB Information
TWRP for S4 mini (3G/DS/LTE) [UNOFFICIAL], Tool/Utility for the Samsung Galaxy S4 Mini
Contributors
ne0zone75, arco68, jason972000, thomson.aa + alexax66
Source Code: https://github.com/ne0zone75
Version Information
Status: Stable
Current Stable Version: STABLE
Stable Release Date: 2017-12-06
Current Beta Version: TRYOUTs
Beta Release Date: 2017-12-03
Created 2014-03-11
Last Updated 2017-12-06

Reserved
TWRP CHANGELOG
(grabbed from official TeamWin website)​
v3.0.0
Completely new theme - Much more modern and much nicer looking (by z31s1g)
True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
SuperSU prompt will no longer display if a Marshmallow ROM is installed
Update exfat, exfat fuse, dosfstools (by mdmower)
Update AOSP base to 6.0
A huge laundry list of other minor fixes and tweaks
v3.0.1
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates - added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
reboot option after zip install complete (bigbiff)
other mostly invisible bug fixes and improvements
v3.0.2
Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
Add Greek translation to some builds.
v3.0.3
N/A
v3.1.0
vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention
v3.1.1
Backups will now include adopted storage keys (Dees_Troy)
Fixed an adb restore issue (bigbiff)
Fixed rebooting when no OS is present (Dees_Troy)
Fixed line wrapping in the GUI terminal (_that)
Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)Updated TWRP source code to AOSP 7.1.2
v3.2.0
Allow restoring adb backups in the TWRP GUI (bigbiff)
Fix gzip backup error in adb backups (bigbiff)
Fix a bug in TWRP's backup routines that occasionally corrupted backup files (nkk71)
Better support for installing Android 8.0 based zips due to legacy props (nkk71)
Support vold decrypt with keymaster 3.0 in 8.0 firmwares (nkk71)
Decrypt of synthetic passwords for Pixel 2 (Dees_Troy)
Support newer ext4 FBE policies for backup and restore in libtar (Dees_Troy)
v2 fstab support (Dees_Troy)
Bring TWRP forward to android 8.0 AOSP base (Dees_Troy)
Various other minor bugfixes and tweaks

Reserved

I installed the Flash version and it works perfectly.
Thank you for your work.

xfire said:
I installed the Flash version and it works perfectly.
Thank you for your work.
Click to expand...
Click to collapse
Yeah same here thanks
GT-I9195, Liquid Smooth beta 3, f4k 1.3.2 b.

Good job, no bugs untill yet thx

I don't think I understand the difference between this one and the other 2.6.x one we current have. The other works fine with kitkat?

civicsr2cool said:
I don't think I understand the difference between this one and the other 2.6.x one we current have. The other works fine with kitkat?
Click to expand...
Click to collapse
Here is the TWRP 2.7.0.0 changelog as it is published on official TeamWin website
What's new in 2.7.0.0:
Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
Allow sideloading from /tmp on encrypted devices
Check for a crypto footer before asking for a password to prevent user confusion
Additional checks for validity to auto generated backup names
Text wrap in the console output
Proper caps lock support in the keyboard
Mouse support via USB OTG for devices with a broken digitizer
Improve scanning of storage locations for OpenRecoveryScript
Haptic feedback for buttons, keyboard, and vibration at the end of longer running actions
Fixed ext4 wiping when no selinux contexts are defined for that partition (e.g. sd-ext)
Update SuperSU to 1.93 and improve installation process
Added selinux contexts restoration to fix permissions
Load RTC offset on Qualcomm devices to fix the date/time in recovery
USB Mass Storage fixes Add SELinux support checking
Add Disk Usage class to better handle excluded folders (e.g. Google Music cache)
Add 4.4 AOSP*decrypt support
Add some toolbox utilities to TWRP (namely to support SELinux functions not supported in busybox)
Various SELinux fixes and bug fixes
Note:*2.7 marks the first time that we are dropping support for older devices. We are doing this because of the SELinux support needed to install 4.4 Kit Kat ROMs. The non-TWRP*parts of the recovery image have to be built in at least a 4.1 tree and the kernel that is included in the recovery image has to support writing SELinux contexts. We don't own most of the devices that we support so we depend on outside testers and developers to help us update devices. In many cases we can't find someone readily. Come to #twrp on Freenode if you want to help bring your device up to date. You can tell right away if your device will support 4.4 ROMs in 2.7. Boot TWRP*and press the console button (the square-ish button either in the bottom middle or upper right) to view the console output. If it doesn't say "Full SELinux support" in the console, then your device still needs some work. Help us help you.
Click to expand...
Click to collapse
So to answer your question : yes, 2.6.3.0 can work with KitKat but 2.7.0.0 is a new major update to TWRP :good:
Regards
Sent from my TF300T

Any additional feedback ?!
Hey, combined downloads count of .tar.md5 and flashable .zip versions has already reached 50 ! Thank you for downloading my files :good: Does anybody have any additional feedback ? Have you tried flashing pre-KK ROMs with it ? If so, was it successfull ?
Thank you for reporting back
BTW TWRP 2.7.0.1 will be out soon upstream... i will update downloads links in consequence

New builds are out !
Hello, new builds are out and ready for download It's built from today's synced TWRP sources from OmniROM GitHub tree and corrects some minor bugs : you can checkout changes HERE
You can download the new version HERE for the zipped .tar.md5 and HERE for the flashable .zip
OP download links updated too :highfive:
Enjoy

TWRP Update !
I've updated TWRP again (please checkout post number 1... thank you !)
Here is the main update of this build :
Implement "take a screenshot" feature
* Like in android - press power+volume down, screenshots are saved
in /sdcard/Pictures/Screenshots (if /sdcard is mounted) or /tmp
Click to expand...
Click to collapse
Enjoy

Installed the flashable TWRP zip over CWM recovery; worked fine.
1st backup however failed. No immediate indication why.
After a little searching, I found out that my extSD was full, so my own dumb mistake :laugh: But the program could have mentioned that too..
And I've noticed the date & time were not correct in recovery; but if I remember right that was already the case in my previous CWM recovery so it might not be recovery related. Anyone knows a sollution to correct that issue?
I know, we can manually set the backup name and type in the correct date & time in TWRP, but it would be easier if it was correct from the beginning

onimorza said:
Installed the flashable TWRP zip over CWM recovery; worked fine.
1st backup however failed. No immediate indication why.
After a little searching, I found out that my extSD was full, so my own dumb mistake :laugh: But the program could have mentioned that too..
And I've noticed the date & time were not correct in recovery; but if I remember right that was already the case in my previous CWM recovery so it might not be recovery related. Anyone knows a sollution to correct that issue?
I know, we can manually set the backup name and type in the correct date & time in TWRP, but it would be easier if it was correct from the beginning
Click to expand...
Click to collapse
Hello, i assume that you have already set your timezone in 'settings' menu Anyway reset all TWRP settings in 'settings' menu and set your timezone again then power off your phone, re-power it on to system ; finally go back to TWRP... time must now be correct !
At least my device is showing correct time by doing this trick !
Hoping that will help you...
Sent from my GT-I9195

ne0zone75 said:
Hello, i assume that you have already set your timezone in 'settings' menu Anyway reset all TWRP settings in 'settings' menu and set your timezone again then power off your phone, re-power it on to system ; finally go back to TWRP... time must now be correct !
At least my device is showing correct time by doing this trick !
Hoping that will help you...
Sent from my GT-I9195
Click to expand...
Click to collapse
I followed your steps but unfortunately it's still 8:16PM on 13 April 2013 in recovery whilst it's 2:14PM 24 March 2014 last time I checked
Thanks anyway for the tips; I'll try to play with it a little more to see if I can figure it out.

onimorza said:
I followed your steps but unfortunately it's still 8:16PM on 13 April 2013 in recovery whilst it's 2:14PM 24 March 2014 last time I checked
Thanks anyway for the tips; I'll try to play with it a little more to see if I can figure it out.
Click to expand...
Click to collapse
Please let me know if you find it out... TWRP settings are stored in 'TWRP' directory from your internal storage... not microSD
Good luck !
Sent from my GT-I9195

Hello all, from now ALL downloads of this project are also available from the downloads tab of post number 1 in addition to Dev-Host links :victory:
Be well

I will release a TWRP update soon when all recent important commits will be merged upstream
Stay tuned...
Sent from my GT-I9195

So far your TWRP works great, I really enjoy it's benefits over CWM: no more clicking down, down, down etc
Verstuurd vanaf mijn Transformer TF101 met Tapatalk

jake3317 said:
So far your TWRP works great, I really enjoy it's benefits over CWM: no more clicking down, down, down etc
Verstuurd vanaf mijn Transformer TF101 met Tapatalk
Click to expand...
Click to collapse
Thanks... an update will be released this W.E.
Sent from my GT-I9195

TWRP update released...
I've just updated Dev-Host download links... new build is currently uploading on xda downloads page of this project... please checkout post 1
This new build is compiled against SlimKAT build 4 sources tree instead of CyanogenMod 11.0; it should fix timezone issues that some of you encountered and features a lot of improvements => compatibiltiy with JB ROMs should be fine (for KK ROMs support is full) AND many other fixes :good: (still lacks the 'take a screenshot from recovery' feature which will probably be merged soon...)
There is no changelog because it's a TWRP 2.7 intermediate build BUT you can review merged commits included into it HERE...
It's available as a zipped .tar.md5 Odin flashable file AND a .zip custom recovery flashable file as usual :highfive:
Thanks to all of you who downloaded my recovery files so far :good:
All the best
Tapatalked from my TF701T
EDIT : All download links are now updated...

[ROM]★★★[TF701T KitKat 4.4.4][CROMBi-kk 20140714][DEODEX | CM11 Base][JULY 14]★★★

[ROM]★★★[TF701T KitKat 4.4.4][CROMBi-kk 20140714][DEODEX | CM11 Base][JULY 14]★★★
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TF701T USERS: YOU MUST BE UNLOCKED, ON THE ASUS STOCK JB 4.3 BOOTLOADER VERSION 10.26.1.18 AND HAVE A WORKING RECOVERY - CWM 6.0.4.6+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS IN POST 2 IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM base. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 10 mins to stabilise!
Features and Tweaks
This ROM is based from CM11 KitKat 4.4.4 AOSP sources
Based off cm-4.4-20140714-crombikk4.4.4-tf701t source by sbdags/lj50036
Full Aroma Installer for main rom including choice of 2 kernels
CM11 kernel built from CM11 source by sbdags
Remixed Asus 10.26.1.18 kernel with CM11 ramdisk - repacked by sbdags
DPI Size: 320 (TF701 recommended fonts), 300 (Medium fonts), 280 (Small fonts), 260 (Very Small fonts), 240 (Tiny Specsavers fonts)
Launchers: Trebuchet, Google Experience Launcher, Apex , Nova
Boot Animations: CROMBi-kk, CM Circle of Fire, CM Color Circle, CM Stock, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs) included in aroma installer
Misc Apps: ESFile Explorer, Adobe Flash, Dolphin Browser, AdAway, Titanium Backup, DropBox, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support!, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
Change Log
20140714 changes
- Rebuilt from CM11 4.4.4 Kitkat - CROMBi-kk source - maintained by lj50036!
- Repacked new CM11 kernel - version 3.4.96
- Fixed the settings - staus crashing
- Fixed the screen not shutting off when closing the lid when docked - thanks psudeke!
- Updated permissions to 4.4.4 CM11 set in updater script
- Updated YouTube to version 5.7.41
- Updated Google Maps to version 8.1.1
- Updated Google Plus to version 4.4.3.69327528
- Updated Google Search to version 3.5.16
- Updated Google Music to version 5.6.1609P
- Updated Google Hangouts to version 2.1.311
- Updated Google Core Services to version 5.0.84
- Updated DropBox to version 2.4.2
- Updated Apex Launcher to version 2.4.0
- Updated Nova Launcher to version 3.0.2
- Updated Gravity Box to version 3.2.4
- Updated ESFileExplorer to version 3.1.8
20140614 changes
- Rebuilt from new CM11 KitKat 4.4.3 base - compiled by sbdags
- Fixed Tasker crashing due to change in framework file in Google Maps
- Tweaked changes to kernel, cpu, vm and fs tweaks to help performance - see 95CleanTWEAKS in init.d
- Added more tweaks to sysctrl section of init.d script for extra smoothness
- Improved GPU rendering when software rendering is diabled in aroma options
- Updated Android Terminal Emulator to version 1.0.60
- Updated Google Play Services to version 4.4.52
- Updated Google Play Store to version 4.3.20
- Updated Google Talkback to version 3.5.1
- Updated Google Plus to version 4.4.2.68956353
- Updated Google Text-to-Speech to version 3.1.3.1162895
- Updated Google Mail to version 4.8
- Updated Google Music to version 5.5.1514O
- Updated Google Maps to version 8.1.0
- Updated Google Hangouts to version 2.1.224
- Updated Google Now Launcher (previously Google Experience Launcher) to version 1.0.16.1154249
- Updated YouTube to version 5.7.38
- Updated Xposed Framework to version 2.6.1
- Updated GravityBox to version 3.1.5
- Updated ESFile Explorer to version 3.1.6
- Updated Titanium Backup to version 6.1.5.6
- Added inverted blue CM Theme as it's rather pretty
20140510 changes
- Rebuilt from new CM11 base compiled by sbdags
- Latest CM11 kernel compiled by sbdags
- Added 2 new boot animations from psudeke
- Updated Google Calendar to version 201404014
- Updated Google Music to version 5.5.15110.1148372
- Updated Google Hangouts to version 2.1.100
- Updated Google Text to Speech to version 3.0.11.1070024
- Updated Google Search to version 3.4.16.1149292
- Updated Google Maps to version 8.0.0
- Updated YouTube to version 5.6.36
- Updated Google Core Services to latest version
- Updated DropBox to version 2.4.1
- Updated Dolphin Browser to version 10.3.1
- Updated Apex Launcher to version 2.3.3
- Updated Android Terminal Emulator to version 1.0.59
- Updated Xposed Framework to version 2.5.1
- Updated Gravity Box to version 3.1.2
- Updated ES File Explorer to version 3.1.3
- Updated Titanium Backup to version 6.1.5.5
20140330 changes
- Repacked CROMi-X 6.1 Stock Modded kernel with CM11 ramdisk with tweaks
- Added echo "1" > /sys/devices/system/cpu/cpufreq/interactive/io_is_busy to init.d script - thanks LuciusZen
- Added a new bootanimation by psudeke
- Updated Google Maps to version 7.7.0
- Updated Google Core Services to latest version
- Tidied up Aroma to make it easier to merge new builds
- Updated ES File Explorer to version 3.1.1
- Updated Dolphin Browser to version 10.2.8
- Updated GravityBox to version 3.0.0 KitKat Edition
- Updated PlayStore to version 4.6.17
- GApps now included in main installer
- Removed ROM provided calendar.apk and googlecalendarsyncadapter.apk
- Added latest Google Calendar as an option
- Added latest Google Music as an option
- Fixed installer so hopefully users won't have an issue with addon.d scripts
- Fixed the CM11 backup and restore scripts not running as ro.cm.version was missing CM11
- Terminal Emulator lib file only installed when option is chosen in installer
- Added Dolphin Browser and JetPack with FlashPlayer in installer as this is the only way to use flash in KitKat right now
- Updated Stock Browser Icon to Asus 4.3 version
- Updated Nova Launcher to version 2.3
- Updated Adobe Flash version to hacked version to test with 4.4
- Updated Adaway to version 2.8.1
- Updated dropbox to version 2.3.12.10
- Updated Terminal Emulator to version 1.0.58
- Build.prop edit to increase scroll sensitivity
ro.min.fling_velocity=90000
ro.max.fling_velocity=200000
- Added Cyanogen Stock Bootanimation as option
- Split GPU rendering into 2 parts - Need to test differences:
Part 1 forces GPU Rendering for 2D operations in the build.prop
Part 2 forces software rendering to be disabled thus the GPU must be used
- Added tweaked Browser.apk back in as well as media codecs and lib file for Terminal Emulator
- Final tidy up of ROM and scripts for release
- Built Aroma Script for main ROM installer
- Added Browser to RAM script
- Repacked Browser.apk with debug options on by default for speed - see labs options
- Added CleanTweaks init.d script from CROMi-X 6.1 as a test (need to analyse what is compatible)
- Build.Prop tweaks from CROMiX
# CROMBi-kk
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.mount.playsnd=0
persist.service.debuggable=1
ro.kernel.android.checkjni=0
# Improve Touch Pressure
touch.pressure.scale=0.001
ro.min.fling_velocity=15000
ro.max.fling_velocity=35000
# Battery savers
ro.ril.disable.power.collapse=0
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=80000000
ro.media.enc.hprof.vid.bps=8000000
# Smoother video streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
# Device will boot faster
ro.config.hw_quickpoweron=true
# Allow dalvik to use JIT (Just in Time) Compiler
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.check-dex-sum=false
dalvik.vm.dexopt-flags=m=y,o=f,u=n,v=a
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X)
@lj50036 - Source Guy (From CMB ROMS)
Credits
Google, wow is all I can say!
CyanogenMod we wouldn't be doing this if if weren't for them (even if they are for profit now hah).
CMB for the basis of our Gapps package!
@nycbjr (CMB ROMS team leader) Thx for all the time teaching me the way (lj50036)!!!!
@_that For all the great advice!!!!!
To Do
Add Asus Apps as separate install
More Kernels and Tweaks
XDA:DevDB Information
CROMBi-kk, a ROM for the Asus Transformer TF701
Contributors
sbdags, lj50036, _that
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.4.96
ROM Firmware Required: 10.26.1.18 bootloader
Based On: CyanogenMod 11 AOSP
Version Information
Status: Beta
Current Beta Version: 20140714
Beta Release Date: 2014-03-30
Created 2014-03-30
Last Updated 2014-07-14

How to Upgrade!
HOW TO FLASH
Make sure you have prepared by copying the ROM zip file to your internal SD Card or external SD Card first.
Please Unlock using the Asus Unlock Tool first found here.
Note installing and running this app will wipe your device and void your warranty.
You can flash CWM 6.0.4.7 using the instructions here.
Direct File Link is here.
To flash a recovery you need to have the fastboot.exe file and cwm recovery.img file in the same folder.
Right click + shift on the folder they are in and choose open command prompt here
Boot into the Bootloader by either booting with the Power and Volume Down Buttons held down until you get the 3 icons or by typing the following into the command prompt.
Code:
adb reboot bootloader
Then type the following commands to flash the recovery image:
Code:
fastboot flash recovery recovery.img
fastboot reboot-bootloader
Start the recovery by making sure the RCK icon is highlighted (use volume down to move) and push volume up to select.
If you need to move to the latest bootloader then manually install the 10.26.1.18 firmware from the Asus website.
In recovery choose install zip - install zip from /sdcard and maneuver to the folder you put the rom.zip (vol up and down) and select it using power button.
The AROMA installer will start - as we have no touch screen drivers in CWM yet you will have to use VOLUME UP and VOLUME DOWN to navigate and POWER to select. Choose as many options as you require
Finally reboot when finished.
DEODEX VERSION DOWNLOADS
CROMBi-kk 20140714 DEODEX Full Mirror 1
CROMBi-kk 20140714 DEODEX Full Mirror 2
MD5 Sum: 3a72d94e40b98a6ef63ad63298e8e795
Please hit Thanks and Rate the thread 5 Stars
Care to support the development of this and future ROMS? Please click the Donate to Me button on the left side of the screen under my user name

Extras!
BIG RED WARNING ABOUT PEOPLE WHO THINK THEY ARE MISSING ROOT!
You are not. The way CM11 works is root is not enabled by default after a clean install. Here is how you enable it.
1. Enable developer options by clicking the build number 7 times in settings - about tablet
2. Go to developer settings
3. In the first section click Root access and change to Apps and ADB
Enjoy your rooted rom
PLEASE SPREAD THE WORD

Kernel Sources
All kernels included in this ROM package are unofficial, as they are complied from source, thay may not match the source that they were forked from. I will be linking the kernel sources code as per the GNU GPL ...
Official CM-11.0 Kernel Source CLICK ME
Unofficial CM-11.0 Kernel Source CLICK ME

Good work! [emoji2]

Ballin out of control.
You must have read my mind, was going to ask if you could add options for disabling fsync and journalling. Awesome work, cant wait to test.
PS - How is dolphins performance? Now that stock is flash player free i will need a new browser

In this ROM don't work Home button and express settings in status bar. Maybe because I flash it without full wipe, only cache and dalvik cache. But perfomance is greate :good:

lucius.zen said:
Ballin out of control.
You must have read my mind, was going to ask if you could add options for disabling fsync and journalling. Awesome work, cant wait to test.
PS - How is dolphins performance? Now that stock is flash player free i will need a new browser
Click to expand...
Click to collapse
Dolphin speed is out of this world on 4.4!

Trel725 said:
In this ROM don't work Home button and express settings in status bar. Maybe because I flash it without full wipe, only cache and dalvik cache. But perfomance is greate :good:
Click to expand...
Click to collapse
Which is why it says you must wipe There are no special keys as it is aosp.

sbdags said:
Which is why it says you must wipe There are no special keys as it is aosp.
Click to expand...
Click to collapse
Thanks...I'm downloading:good:

Rom is great, installation went without a glitch. Some apps unchecked did install anyway (ie News & Weather) but that was also the case in 4.3 if I remember well.
The only problem I have at the moment is to load Google Agenda Everything seems to have synced well but the agenda. I get a message that "Sync is currently experiencing problems,. It will be back shortly" , so it might not be related to the rom.
Question/comment: I understand that you did not include lucius.zen's tweak with regard to screen unresponsivness?
edit: can I add it to 95CleanTWEAKS
Anyhow, this a great rom. Chapeau!:good:

NoUseToRush said:
Question/comment: I understand that you did not include lucius.zen's tweak with regard to screen unresponsivness?
edit: can I add it to 95CleanTWEAKS
Anyhow, this a great rom. Chapeau!:good:
Click to expand...
Click to collapse
Read line 2 in the change log????
Sent from my K00C using Tapatalk

berndblb said:
Read line 2 in the change log????
Sent from my K00C using Tapatalk
Click to expand...
Click to collapse
Thanks for pointing it to me. Still,it's seems to me that the screen is not as responsive now as it was when I installed the script in the other rom

NoUseToRush said:
Thanks for pointing it to me. Still,it's seems to me that the screen is not as responsive now as it was when I installed the script in the other rom
Click to expand...
Click to collapse
Yes I agree it doesn't seem to help the cmbase as much. I need to look into the kernel to see how it is used.

sbdags said:
Yes I agree it doesn't seem to help the cmbase as much. I need to look into the kernel to see how it is used.
Click to expand...
Click to collapse
thanks for your quick response. I still have this morning a problem with my google account (sync error with agenda). I'd like to know if anyone else has that problem?

Thanks. So should flashing this over cm11 be fine?

YayYouFixedIt said:
Thanks. So should flashing this over cm11 be fine?
Click to expand...
Click to collapse
The OP would recommend that you do a full wipe before flashing, to get the most out of this ROM that's just what we advice.. :good:
If you do have issue, don't be surprised if that's one of the first things your asked... 'Did you do a full wipe' ??
Thx Josh

lj50036 said:
The OP would recommend that you do a full wipe before flashing, to get the most out of this ROM that's just what we advice.. :good:
If you do have issue, don't be surprised if that's one of the first things your asked... 'Did you do a full wipe' ??
Thx Josh
Click to expand...
Click to collapse
Ya I took the risk.
Not recommended (Google play, I'd issues, home button not working)
Sure is much faster though.

Still going through the process of getting everything all setup again. So far all is sweet.
And Props to the new boot animation, simple but very clever.

NoUseToRush said:
thanks for your quick response. I still have this morning a problem with my google account (sync error with agenda). I'd like to know if anyone else has that problem?
Click to expand...
Click to collapse
I have a similar problem with Google Calendar not syncing. And yes, I did a full wipe. I've also tried removing the Calendar from the ROM (both manually and through a re-install) and installing instead from the Play store.
But the ROM overall is very responsive.

[ROM][UNOFFICIAL][STABLE] SlimKAT [4.4+][S4 mini] v9.0 FINAL | Updated 2015-01-20

SlimKAT for S4 mini (GT-I9190 + GT-I9195)​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimROMs is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimROMs team work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKAT is the project name for SlimROMs based on Android 4.4+ and offers the following unique SlimROMs features :
FEATURES :
-> The real dark Slim : Invert the whole ROM including Gapps with one click.
-> Slim Recents : A complete replacement of the AOSP recents screen to allow better multitasking, along with marking favourite apps.
-> SlimPIE : Based on CM's PIE, inspired by PA's PIE with a light touch of Slim. A true community feature.
-> Slim dialer : A full replacement of the official Google closed source dialer with added features.
-> Privacy guard : Disable unnecessary permissions set by app developers.
-> Shake Events : Shake your device to launch apps or secure it on lockscreen.
-> Notification reminder : An easy way to quickly set short reminders to show on the notification drawer.
-> Notification drawer and and lockscreen shortcuts : Access your most important apps from everywhere.
-> Custom Quick Settings Tiles : Why just settings? Use whatever you want.
-> Camera : Discover SlimROMs team unique Camera feature...
DISCLAIMER : Every team mentioned below and myself or any contributor to this project will never ever be responsible for any damages you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> SlimROMs team (ROM tree)
-> CyanogenMod team (device and kernel trees)
-> TheMuppets team (vendor tree)
-> SaberMod team (toolchains)
NOTE : I am not affiliated with any of the teams mentioned above...
THANKS TO :
-> @F4k (for sharing some of his knowledge with me...)
-> @JustArchi (build optimizations)
-> @aconger (screenshots)
INSTALLATION : To install this ROM on your Galaxy S4 mini 3G/LTE you'll need this checklist to be all checked
kitkat enabled custom recovery : regular / Philz CWM or TWRP...
My SlimKAT ROM file...
-> If you are coming from stock ROM please do a full wipe (cache/dalvik/system/data) from recovery before flashing it AFTER having done a FULL NANDROID BACKUP, thank you !
-> If you are coming from another AOSP ROM, you can flash it AFTER having wiped cache/dalvik...
OPTIONAL : You can use any AOSP GAPPs if you want to have Google Play services (I'm using PA-GAPPs nano-modular package by @TKruzze for example )
NOTE : SlimKAT is a KK 4.4+ ROM so if you want to activate ART instead of DALVIK, simply go to 'settings/developer options' and select ART as runtime :good: BUT please do remember that ART is still under heavy development...
DOWNLOADS :
=> This ROM is DEODEXED : if you want to ODEX it (better battery life and better system wide responsiveness), then i do recommend that you use @MatrixDJ96 ODEXER tool available HERE
TWRP Recovery
=> You will find my TWRP for S4 mini page over here...
SlimKAT ROM
=> STABLE version
SlimKAT for GT-I9190 Build 9.0 (2015-01-20)
SlimKAT for GT-I9195 Build 9.0 (2015-01-20)
=> TRYOUT version : none ATM !
Kernel updates : enhanced CM kernel built with latest SaberMod GCC 4.9 is available and is featuring O3 + graphite + Linux 3.4.106 (full details here...)
=> INFO : As i do not own a S4 mini anymore each upcoming update for both devices will be UNTESTED by myself...
-> In SlimKAT root access needs to be activated like this (true if installing for the first time...) : go to 'settings/developer options' and disable it, then go to 'settings/advanced settings/superuser' and set root access to 'apps/adb' (this will re-enable 'developer options' AND you will gain root access)
WARNING : Some information below is maybe obsolete !
NOTE : My SlimKAT ports for GT-I9190/5 ports include 'S4 mini settings' APK !
INFO 1 : CURRENT ROM FILES ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT (at the top of this post).
INFO 2 : You will find screenshots of this running ROM file from the corresponding tab of this project too...
Happy flashing !​
CHANGELOG :​
2014-04-07 : RC1 -> INITIAL RELEASE​
=> Bluetooth is not working... it's a CyanogenMod device specific issue; if you want you can try to flash a custom kernel onto your phone after flashing my ROM file... it will maybe fix the BT issue... (choose any AOSP custom kernel suitable for the Galaxy S4 mini LTE...)​=> Auto rotation is failing too... i'm working on it ATM !​=> DPI is small ATM... value will be raised in next build ​
2014-04-09 : RC2​
=> DPI is fixed and set to 230 220 in the SlimKAT ROM .zip flashable file :good:​
2014-05-27 : RC3​
=> same ROM features (and failings...out of the box bluetooth is still not working at all !) as RC2, BUT...​=> ROM is compiled with 'Google GCC 4.8' and kernel with 'Official Linaro GCC 4.7' with straight @justarchi v2 optimizations applied ! (you can document yourself about it in his topic over here... special thanks to him for his great work :good:​=> In addition, RC3 is a 'user variant' build (ODEXED), not a 'userdebug variant' one (DEODEXED) like it was previously the case, with all 'slowing down debugging options' turned OFF...​=> RC3 is not compatible AT ALL with all previous releases; please perform a clean install... Thank you !​
2014-06-01 : RC4​
=> same ROM features as RC3, BUT...​=> bluetooth issue of my S4 mini SlimKAT ports is history ! :victory: :good: (BT is now fully working out of the box : therefore my SlimKAT BT fix is obsolete and is discontinued from now on; it is also the case for my 'S4 mini settings' flashable .zip -> post number 2 will soon be empty...​=> RC4 is not compatible AT ALL with all previous releases; please perform a clean install... Thank you !​
2014-06-10 : STABLE​
=> same ROM features as RC4 which was already stable, BUT in addition you will find...​=> Android 4.4.3 4.4.4 !​=> 'build.prop' file is fixed ! (from inside the ROM installers which are not signed anymore...)​=> F2FS support ! (latest CyanogenMod 11.0 kernel is officially F2FS enabled...) : therefore, you should be able to boot your device with embedded kernel, whatever the filesystem used (EXT4/F2FS) by tinkering my ROM installers a little bit...​=> APP2SD functionality ! (available from 'settings/apps' menu)​
NOTE : If you are interested in my work and download my files, please report back AND hit my 'THANKS!' button if you think i deserve it ! Thank you !
Have fun with it !​
XDA:DevDB Information
SlimKAT for S4 mini (3G/LTE) [UNOFFICIAL], ROM for the Samsung Galaxy S4 Mini
Contributors
ne0zone75, silesh.nair, spanish33
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any kitkat enabled custom recovery
Based On: SlimKAT
Version Information
Status: Stable
Current Stable Version: STABLE
Stable Release Date: 2015-01-20
Current Beta Version: TRYOUT
Created 2014-04-07
Last Updated 2016-12-24

SlimKAT Power Packs for GT-I9195/0 + S4 mini settings for SlimKAT...
SlimKAT Power Packs​
I've re-packaged my original SlimKAT Power Packs for TF300T init.d scripts (Browser2RAM & ZipAlign) into two flashable .zip files to enhance user experience of SlimKAT on GT-I9195 , AdBlock is included and when flashing these packs, filesystem of your device is automatically tuned (see details below )
-> Basic Power Pack for GT-I9195/0 : contains AdBlock and Browser2RAM + ZipAlign scripts while ext4 filesystem tuning sets data journaling ON for /data but tunes /system and /cache too :good:
-> Enhanced Power Pack for GT-I9195/0 : it's contains and does exactly the same as the one above BUT it features GPU Tweaks : GPU 2D is forced AND software rendering is disabled !
The main purpose of the first pack is to safely improve the user experience on your device and to raise improper system shutdown tolerance, while the second one share the same purpose with maybe enhanced graphics performance :good:
PREREQUISITE : Please perform a full NANDROID backup from recovery before flashing it !
DISCLAIMER : I will never ever be responsible for any damages you do to your device !
ALL CREDIT GOES TO AND ONLY TO :
-> @hardslog (this pack is based on his one... thank you !)
-> me
INSTALLATION : Just flash it AFTER a full NANDROID backup, then just wipe cache/dalvik and reboot to system... You can use it with any kernel : embedded CM / f4ktion / etc...
DOWNLOADS :
-> SlimKAT Basic Power Pack for GT-I9195/0 (2014-04-21) | MD5
-> SlimKAT Enhanced Power Pack for GT-I9195/0 (2014-04-21) | MD5
Have fun with it...
NOTE : These packs have been tested by myself, you should safely flash it to your device... if anything goes wrong then restore your full NANDROID backup
INFO : THESE PACKS ARE ALSO AVAILABLE FROM THE DOWNLOADS TAB OF THIS PROJECT (at the top of this post)
PS : Thanks @kioshio for pointing a bug out in the initial release...
THE SECTION BELOW IS DISCONTINUED AND OBSOLETE !​
S4 mini settings for SlimKAT​
You will find below a Dev-Host download link for this SlimKAT re-compiled APK, packaged into a convenient .zip flashable file :victory:
I have tested it and it is working as expected... simply flash it and enjoy
DOWNLOADS :
-> S4 mini settings for SlimKAT (2014-04-30) | MD5
Have fun with SlimKAT

SlimKAT for GT-I9195/0 bluetooth fix released !
Reserved...

Nice ill try it
Sent from my GT-I9195 using XDA Premium 4 mobile app

imputazz said:
Nice ill try it
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello and thank you for trying it out :good:

ROM works pretty good, but at first boot, the DPI was set on 220, so I've changed it to 230 and the ROM looks like a regular S4 Mini ROM now.
BTW, you as a developer, is there any chance to force kernel to send power to USB port? I mean USB OTG.

lipalok said:
ROM works pretty good,... ...BTW, you as a developer, is there any chance to force kernel to send power to USB port? I mean USB OTG.
Click to expand...
Click to collapse
Thank you ! I honestly do not know how to do this sadly... maybe you could ask for this feature into any GT-I9195 custom kernel thread
Have a nice day
Sent from my GT-I9195

How can anyone change dpi??

mobrol said:
How can anyone change dpi??
Click to expand...
Click to collapse
Hello, you'll find a mini HOWTO HERE...
Kind regards
EDIT : DPI will be adjusted in upcoming SlimKAT RC1 for GT-I9195 build 4.2 Thanks @lipalok for pointing this out :good:

Is halo implemented?

Flatric said:
Is halo implemented?
Click to expand...
Click to collapse
Hello, unfortunately no, it isn't... you'll find below corresponding official SlimKAT FAQ entry from SlimROMs official website
When are you/Are you going to add Halo?
Not before it is stable. It's currently not in a state that we can include it. And even when it becomes stable it's currently not something that we're considering including.
Click to expand...
Click to collapse

ne0zone75 said:
Hello, unfortunately no, it isn't... you'll find below corresponding official SlimKAT FAQ entry from SlimROMs official website
Click to expand...
Click to collapse
Ok, thanks for the fast answer

Sorry I just got the phone today.
This rom will not work with 9192? And will 9190 work? Or only 9192 ROMs for my phone?

Pangadaywalker said:
Sorry I just got the phone today.
This rom will not work with 9192? And will 9190 work? Or only 9192 ROMs for my phone?
Click to expand...
Click to collapse
Hello, my SlimKAT ROM file is dedicated to S4 mini LTE (GT-I9195) ATM, its embedded kernel fits ONLY this device... not S4 mini 3G (GT-I9190) or S4 mini dual (GT-I9192) sadly BUT i may add support to these 2 S4 mini variants someday
With that said, you can still try to flash it... it will certainly boot BUT you will lack device specific features like dual SIM support AND after SlimKAT ROM flashing you can try to flash a custom kernel from recovery that fits exactly your phone variant
Cheers
Sent from my GT-I9195

SlimKAT RC1 for GT-I9195 build 4.2 is out !
Dear SlimKAT users, i've just updated download links for current SlimKAT weekly build 4.2 by SlimROMs TEAM on both xda (downloads tab on this project) and Dev-Host :highfive: Simply checkout post number 1
Below you'll find build 4.2 changelog from SlimROMs official website :
Changelog:
SlimRecents fix 50ms unresponsiveness
Chamber of Secrets string edit
Chamber of Secrets add global database
Fix slow start for settigns/sound
Fix avrcp absolute volume
Do not show Home behind full screen activity
Fix Airplane mode on/off
Parallel shutdown
Great deal of fixes and optimizations for frameworks base
TWRP updated to 7.0+ (for devices with recovery in boot.zip)
Update busybox
Some updates to hardware_qcom_audio-caf
Some updates to frameworks_av
Click to expand...
Click to collapse
You can safely dirty flash it over initial build 4 release :good: (a full NANDROID backup from recovery is recommended though...)
NOTE : I still do not have fixed DPI but you can set it manually after flashing...
From a terminal with root access enabled simply follow these instructions in order to adjust DPI :
Code:
# mount -o rw,remount /system
Then with a text editor simply edit /sytem/build.prop file and search for this line : 'ro.sf.lcd_density=182' (without the quotes...) and please change 182 value to 220 like this 'ro.sf.lcd_density=220' then save the file and input this from the same termnal session started in previous step :
Code:
# mount -o ro,remount /system
...finally you just have to reboot and DPI will be fixed :victory:
Sorry for the inconvenience DPI will be correctly set in .zip flashable file i will release for upcoming SlimKAT RC1 for GT-I9195 weekly next week
Have fun with it

I am still checking what is valid for my phone and what is not. Unfortunately or fortunately I don't know there isn't much so I may stop for now with playing with ROM's. Will wait if 4.3 at least get to the 9192 I will be happy already.
Didn't even find a bloatware free ROM for 9192. I found only the trueclean but I didn't yet root my phone because of Knox stuff which I am not sure I should pay much attention since I never used the warranty of any phone we always replace it first.
I will see and keep reading of what comes out.
Another question I have since 9190 is the same for 9192 besides the dual chip and I do not use dual chip support, can I get 9190 and will it work perfectly withouth the dual sim support (which I don't actually needed it)?

Pangadaywalker said:
...Another question I have since 9190 is the same for 9192 besides the dual chip and I do not use dual chip support, can I get 9190 and will it work perfectly withouth the dual sim support (which I don't actually needed it)?
Click to expand...
Click to collapse
Hello, according to phoneArena.com website and AFAIK, GT-I9192 is the dual SIM slot version of the GT-I9190 aka Galaxy S4 mini 3G (serrano3gxx); i do know that GT-I9192 SOC is a Qualcomm Snapdragon 400 MSM8230 and GT-I9195 features a Qualcomm Snapdragon 400 MSM8930 as well as GT-I9190 (i think so because both GT-I9195 and GT-I9190 have the same 'msm8930-common' CyanogenMod kernel sources tree as a basis... only defconfig file differs !).
So if you own a GT-I9192 and put a GT-9190/GT-9195 custom ROM on it, it will fail because SOCs are not the same on GT-I9192 and GT-I9190/GT-I9195...
With that said if you want to install a custom ROM on your GT-I9192 you'll have to find a dedicated custom recovery and ROM because i'm afraid that CyanogenMod kernels for GT-I9190/GT-I9195 may be incompatible with GT-I9192 but i'm not sure about this sadly...
Best regards

Where did you read that the 9192 uses MSM8230?

Whosat said:
Where did you read that the 9192 uses MSM8230?
Click to expand...
Click to collapse
Just over here at phoneArena.com (GT-I9192 specs are at the bottom of the page...)
Samsung Galaxy S4 mini Dual I9192 (With Dual SIM support)
Differences:
Weight: 3.81 oz (108 g) the average is 4.8 oz (137 g)
System chip: Qualcomm Snapdragon 400 MSM8230
UMTS: 850, 900, 1900, 2100 MHz
Data: HSDPA+ (4G) 21.1 Mbit/s, UMTS, EDGE, GPRS
Multiple SIM cards: 2 slots
Click to expand...
Click to collapse
...of course it may not be accurate...

Nice work on the Rom, but am I missing something or is there no theme support.
Sent from my GT-I9195 using Tapatalk

[ROM]★[TF701 LP 5.1.1][ZOMBi-POP OMNI KANG RC1][AUG 29]★

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK KK 4.4.2 BOOTLOADER VERSION 11.4.1.27+ AND TWRP 2.8.6.3+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in TWRP if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 5 to 10 minutes!
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 Data partitions
Based off omni-5.1.1-20150823_zombi_tf701t-KANG source by lj50036/hardslog/sbdags
Full Aroma Installer for main rom including choice of 4 kernels
Remixed Asus kernel with OMNI ramdisk - repacked by sbdags
Omni Kernel by lj50036/sbdags
Extreme Modded Omni Kernel by sbdags
CM12 kernel with OMNI ramdisk by pershoot/sbdags
DPI Size: 280 (TF701 recommended small fonts), 320 (Stock fonts), 300 (Medium fonts) & 260 (Small fonts), 240 (Tiny fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Flow, Unknown Pleasures
Gapps based on Banks' Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
[*]Tip 2: In Developer Settings - Set Animation and Transitions to 0.5 or 0 for extra free speed!
[*]Tip 3: In Performance Settings - Set CPU max and min speed and I/O scheduler to noop
Bug List
[*]No Floating windows yet
[*]Aroma gets stuck sometimes - hit volume up if so to force it to continue
Change Log
Don't forget full wipe to install this please! No excuses!
20150829 ZOMBi-POP 5.1.1 RC1 changes
- Re-based from omni-5.1.1-20150823-zombi_tf701t-KANG maintained by lj50036, hardslog, sbdags
- Fixed missing ZOMBi Tweaks that bring performance back
- New OMNI kernel - thanks lj50036
- Includes the stagefright security fix
- Added dock battery option to installer
- Removed GPU efl.cfg tweaks as no longer in source - thanks lj50036
- Updated to latest Banks Gapps base package (may require google playstore and play framework data wipe)
- Updated Google Maps to version 9.13.0
- Updated Google Search to version 5.1.17.19
- Updated Google Music to version 6.0.1951S
- Updated Google Mail to version 5.5.101116392
- Updated Google Hangouts to version 4.0
- Updated YouTube to version 10.31.55
- Previously saved installer options will be reset on first install due to changes
20150727 ZOMBi-POP 5.1.1 Beta 4 changes
- Re-based from omni-5.1.1-20150726-zombi_tf701t-KANG maintained by lj50036, hardslog, sbdags
- Added dock battery icon as a additional flash zip
- Fixed partitions not getting unmounted correctly for tuning during installation
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Amended SuperSU installer script to give correct permissions and install locations
- Google play services updated to multi-dpi version
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
- Updated ESFile Explorer to version 3.2.5.5
- Updated Nova Launcher to version 4.0.2
20150615 ZOMBi-POP 5.1.1 Beta 3 changes
- Re-based from omni-5.1.1-20150613-zombi_tf701t-KANG maintained by lj50036, hardslog, sbdags
- Installer script now cleans up /data if you do not opt to install gapps for compatibility reasons
20150614 ZOMBi-POP 5.1.1 Beta 2 changes
- Re-compiled Omni kernel with changes to init.macaln.rc and fstab.macallan with only 2 usb mounts
- Still shows 9 USB Mounts in settings
- Switched back to BANKS GAPPS package
- Updated Google Search, Calendar, Hangouts to the latest versions
20150606 ZOMBi-POP 5.1.1 Beta 1 changes
- Re-based from omni-5.1.1-20150605-zombi_tf701t-KANG maintained by lj50036, hardslog
- Created the Extreme Omni Kernel with performance tweaks - possibly unstable
- Basic and Extra Tweaks do not get installed for the Extreme Kernal as it has its own version
- Removed script to to remove RES init.d script when at default 2560x1600 resolution
- Added ZOMBi-POP tweaks to init.d that get installed for all kernels
20150605 ZOMBi-POP 5.1.1 Alpha 4 changes
- Based from omni-5.1.1-20150604-zombi_tf701t-KANG maintained by lj50036, hardslog
20150604 ZOMBi-POP 5.1.1 Alpha 3 changes
- Audio fixed - thanks to pershoot for source and _that and lj50036 for helping to diagnose
- Youtube fixed - thanks to lj50036
20150603 ZOMBi-POP 5.1.1 Alpha 2 changes
- Based from omni-5.1.1-20150601-zombi_tf701t-KANG maintained by lj50036, hardslog
- Repacked Asus Stock 4.4.2 kernel with the zombi ramdisk
- Repacked CM12 kernel with the zombi ramdisk
20150601 ZOMBi-POP 5.1.1 Alpha 1 changes
- Based from omni-5.1.1-20150530-zombi_tf701t-KANG maintained by lj50036, hardslog
- Initial release - omni zombified after source build
- Added SuperSU and su binary for root capability
- Added all the ZOMBi/CROMi-X goodness to the base rom
- Aroma tuned for ZOMBi-POP
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@ikkeT - The Fin
Credits
pershoot for maintaining the CM12 source and his advice and fixes! Thanks man!
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : @berndblb, @gav2fc, @dape16, @dragon_rckr, @glor
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Transformer TF701
Contributors
sbdags, lj50036, hardslog, _that, ikkeT
Source Code: https://github.com/zombi-x
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: 11.4.1.27 - 30 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20150829 RC1
Stable Release Date: 2015-08-29
Current Beta Version: 20150727 5.1.1 Beta
Beta Release Date: 2015-07-27
Created 2015-06-15
Last Updated 2015-08-29

DOWNLOADS
UPGRADE INSTRUCTIONS
Steps
1. Please Unlock using the Asus Unlock Tool first found here.
Note installing and running this app will wipe your device and void your warranty.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.8+ or ClockWorkMod Recovery 6.0.5.0+ Note this ROM will NOT install with older versions of recovery!
TWRP XDA Thread
[email protected]
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 10 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 10 mins to stabilise after the first boot
ZOMBi-POP 5.1.1 RC1 20150829 Full Mirror 1
ZOMBi-POP 5.1.1 RC1 20150829 Full Mirror 2
MD5 Sum: d291e2ff8ea5d82504ed46378ea1790c
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
2. Flash the zip files and reboot after - enjoy your new rom.
Do not forget to wipe data first in recovery if you are coming from another rom or installing this for the first time.

MINE
mine

I will do the download post tomorrow but it will be available in the download tab of this thread in about 10 minutes
Enjoy!

Thank you for this ROM!
Before I attempt to install it, I have a question: will the Aroma installer allow me to avoid installing most of the Google apps? Ideally, I'd like the ROM to be installed with no more apps than I would get with a "micro" or even "pico" version of gapps.
.​

HippoMan said:
Forgive me if I'm overlooking something obvious, but I don't see a "download" tab. Is it on a different web page, perhaps?
Click to expand...
Click to collapse
Top of the page in the black bar ....
Says 'Downloads'
Thx Josh

lj50036 said:
Top of the page in the black bar ....
Says 'Downloads'
Thx Josh
Click to expand...
Click to collapse
Yes, I finally found it. Thank you very much.
.​

Flashed, trying it out now

sbdags said:
...
Aroma gets stuck sometimes - hit volume up if so to force it to continue
Click to expand...
Click to collapse
Aroma got stuck for me on the screen for selecting experimental features, but hitting volume up had no effect. It remained stuck.
No other key interactions worked, either, except to reboot.
Any ideas?
.​
---------- Post added at 23:27 ---------- Previous post was at 23:10 ----------
Well, I redid the entire flash procedure, and this time, it worked.
.​

HippoMan said:
Aroma got stuck for me on the screen for selecting experimental features, but hitting volume up had no effect. It remained stuck.
No other key interactions worked, either, except to reboot.
Any ideas?
.​
---------- Post added at 23:27 ---------- Previous post was at 23:10 ----------
Well, I redid the entire flash procedure, and this time, it worked.
.​
Click to expand...
Click to collapse
+1. Ok now.

Took the beta 1 and 2 from androidfilehost (just need to know where to look ). It also happend to me that the installation would sometimes hang or even reboot the recovery (TWRP). With beta 2 i needed three tries. For the rest: very good as always!!

I think that omni roms don't allow immersive mode like cm does. In CM 12.1 I hide the navigation bar to get some extra screen space and I control the tablet via LMT pie menus and gestures. Is there a way to do the same in omni?

HippoMan said:
Aroma got stuck for me on the screen for selecting experimental features, but hitting volume up had no effect. It remained stuck.
No other key interactions worked, either, except to reboot.
Any ideas?
.​
---------- Post added at 23:27 ---------- Previous post was at 23:10 ----------
Well, I redid the entire flash procedure, and this time, it worked.
.​
Click to expand...
Click to collapse
toolmanz said:
+1. Ok now.
Click to expand...
Click to collapse
doom_71 said:
Took the beta 1 and 2 from androidfilehost (just need to know where to look ). It also happend to me that the installation would sometimes hang or even reboot the recovery (TWRP). With beta 2 i needed three tries. For the rest: very good as always!!
Click to expand...
Click to collapse
ariadnejro said:
I think that omni roms don't allow immersive mode like cm does. In CM 12.1 I hide the navigation bar to get some extra screen space and I control the tablet via LMT pie menus and gestures. Is there a way to do the same in omni?
Click to expand...
Click to collapse
Yes Aroma is a bit dodgy on the device - sometimes it hard locks and all you can do is try again - however this was here before we had touch. Not much I can do about it. The latest aroma builds don't even support our device so we are stuck for now.
As for CM12 stuff - nope it's omni but it soes have omni switch which will eventually allow full screen - but you never know what will be developed in the future. It is kept light for a reason - so it is fast and smooth.

The ROM is running very fast and all seems good except for 1 program I like.
I have a very robust infrastructure in the house and I use an app call SmartWIFIAnalyser.
It will automatically switch to the best WIFI signal as I move around the house.
When I start it - the tablet barfs and returns to the bootup screen (wavy lines) - once it returns from losing its mind, it will slowly get back to normal.
This isn't a deal killer - but it works on Zombie-Pop on my TF700 ??
I tried to grab a logcat and I have provided a link to it .... hope I did this right!
http://d.pr/f/1kqpW

toolmanz said:
The ROM is running very fast and all seems good except for 1 program I like.
I have a very robust infrastructure in the house and I use an app call SmartWIFIAnalyser.
It will automatically switch to the best WIFI signal as I move around the house.
When I start it - the tablet barfs and returns to the bootup screen (wavy lines) - once it returns from losing its mind, it will slowly get back to normal.
This isn't a deal killer - but it works on Zombie-Pop on my TF700 ??
I tried to grab a logcat and I have provided a link to it .... hope I did this right!
http://d.pr/f/1kqpW
Click to expand...
Click to collapse
Seems to be a failure with the renderer. Can you reinstall the ROM but don't install the GPU tweaks on the tweaks page and try again for me please.
Thanks!
Code:
E/BufferQueueProducer( 418): [StatusBar] connect(P): BufferQueue has been abandoned
E/libEGL ( 1730): eglCreateWindowSurface: native_window_api_connect (win=0xb498b108) failed (0xffffffed) (already connected to another API?)
E/libEGL ( 1730): eglCreateWindowSurface:423 error 3003 (EGL_BAD_ALLOC)
F/OpenGLRenderer( 1730): Failed to create EGLSurface for window 0xb498b108, eglErr = EGL_BAD_ALLOC
F/libc ( 1730): Fatal signal 6 (SIGABRT), code -6 in tid 2771 (RenderThread)

sbdags said:
Seems to be a failure with the renderer. Can you reinstall the ROM but don't install the GPU tweaks on the tweaks page and try again for me please.
Thanks!
Code:
E/BufferQueueProducer( 418): [StatusBar] connect(P): BufferQueue has been abandoned
E/libEGL ( 1730): eglCreateWindowSurface: native_window_api_connect (win=0xb498b108) failed (0xffffffed) (already connected to another API?)
E/libEGL ( 1730): eglCreateWindowSurface:423 error 3003 (EGL_BAD_ALLOC)
F/OpenGLRenderer( 1730): Failed to create EGLSurface for window 0xb498b108, eglErr = EGL_BAD_ALLOC
F/libc ( 1730): Fatal signal 6 (SIGABRT), code -6 in tid 2771 (RenderThread)
Click to expand...
Click to collapse
Bingo! It now works but once I enable it and come back out to the home screen it is super small on large screen. There has been some other weirdness with the screen like the drawer shows really large icons (2 to a page ??? ). But nothing I can't handle - ESC out of the screen and go right back in and its working.
Cheers and thanks for another great ROM!

toolmanz said:
Bingo! It now works but once I enable it and come back out to the home screen it is super small on large screen. There has been some other weirdness with the screen like the drawer shows really large icons (2 to a page ??? ). But nothing I can't handle - ESC out of the screen and go right back in and its working.
Cheers and thanks for another great ROM!
Click to expand...
Click to collapse
I need a screen-shot of that .....
Thx Josh

lj50036 said:
I need a screen-shot of that .....
Thx Josh
Click to expand...
Click to collapse
Can't seem to get it to do that again ..... Now when I come back to the home page its blank. Hit ESC a couple of times and it comes back normal. ???
Maybe same problem - with different symptoms ... ?
I will gab screen shots if it happens again.
Cheers
---------- Post added at 02:02 PM ---------- Previous post was at 01:39 PM ----------
Ok. Went into the store and found there was an update to the launcher I use - KK Launcher Prime. I did the update and came back to the home screen - normal.
When I went into the drawer it did it again and have attached the screen shots. They are really faint but you can see 3 icons only. Esc back out and go back in and it's working ???
Thinking maybe its the launcher at fault
Link below.
http://d.pr/f/1gdhS
Cheers

toolmanz said:
Can't seem to get it to do that again ..... Now when I come back to the home page its blank. Hit ESC a couple of times and it comes back normal. ???
Maybe same problem - with different symptoms ...
I will gab screen shots if it happens again.
Cheers
---------- Post added at 02:02 PM ---------- Previous post was at 01:39 PM ----------
Ok. Went into the store and found there was an update to the launcher I use - KK Launcher Prime. I did the update and came back to the home screen - normal.
When I went into the drawer it did it again and have attached the screen shots. They are really faint but you can see 3 icons only. Esc back out and go back in and it's working ???
Thinking maybe its the launcher at fault
Link below.
http://d.pr/f/1gdhS
Cheers
Click to expand...
Click to collapse
Well that is odd indeed ...
Can you set a diff wallpaper and see what that does .....
Thx Josh

lj50036 said:
Well that is odd indeed ...
Can you set a diff wallpaper and see what that does .....
Thx Josh
Click to expand...
Click to collapse
Well I am using 500 Firepaper now and it still does it. Go figure. It must be the launcher. ?

[DISCONTINUED][UNOFFICIAL] CM-12.1 [22 Nov 2016]

IMPORTANT NOTICE​:
As many of you know, the CM-12.1 branch will not be supported in the new LineageOS fork. And many of the new Google security patches are difficult and fiddly to back-port as they are now geared towards Marshmallow and Nougat. So as a result there will be no further updates to this rom.
Instead my focus will now be Fire Nexus ROM for this device.
Also looking at possible ways to get later android versions on the device. Will let you know if there is any progress later.
Thanks for all the support :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Current Progress
updated: 25 Jan 2016
Rules
- Please search the thread before asking questions
- Please try to stay on topic, I know it's not always possible
- Please report bugs here
- Report only one issue per bug report
- When reporting bugs please post a logcat and/or dmesg containing pertinent information regarding the issue...
- Saying something isn't working without proper explanation will not attract any attention.
Prerequisites for Installation
- If you have FireOS 5.0.1 then use Cyanogen Recovery or TWRP Image
- If you have FireOS >= 5.1.1 then use FlashFire 0.50
Fresh Installation from TWRP
- From your recovery perform a Factory Reset
- Flash the ROM File
- Flash Open Gapps - Use either micro, pico or nano
- Do NOT use stock gapps as there is not enough space on the /system partition
- Reboot and enjoy!
- Fresh Installation from FlashFire 0.50
- Click the Red + and choose 'Wipe'
- Ensure System data, 3rd party apps and Dalvik cache are CHECKED
- Click the Red + button and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Cyanogenmod Zip
- Accept defaults
- Click the Red + button again and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Open Gapps Zip.
- Accept defaults
- Move "Wipe" to the Top of the order
- Press the big FLASH button.
Upgrading from FlashFire 0.50
- Click the Red + button and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Cyanogenmod Zip
- Click the Red + button again and choose 'Flash ZIP/OTA'
- Navigate to and choose the latest Open Gapps Zip.
- Accept defaults
- Click the Red + again and choose 'Wipe'
- ONLY tick Dalvik and Cache.
- Press the big FLASH button.
Downloads
*** Please do NOT create any mirrors ***
- CM-12.1 for Amazon Fire 7" 2015 Tablet
- Open Gapps
Source Code
- Device Tree
- Kernel Source: Ford stock kernel, build number update-kindle-global-37.5.6.0_user_560177220
Thanks
- Cyanogenmod
- csolanol
- diegocr
- k4y0z
XDA:DevDB Information
CM-12.1 Amazon Fire 2015, ROM for the Amazon Fire
Contributors
ggow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod
Version Information
Status: Stable
Created 2015-11-15
Last Updated 2017-02-03

Release Notes / Changelog
2016-11-22
- Fix Xposed - Needs testing
2016-11-21
- November 2016 AOSP Security Patch Level
- Switch to using lastest FireOS 5.3.2 - update-kindle-global-37.5.6.0_user_560177220 binaries and boot.img
- Fix Video Recorder bug [Cannot connect to camera]
- Fix bug in OMX causing freeze of video
2016-10-21
- October 2016 AOSP Security Patch Level
- Fix x265 video playback - Thanks @jeromeof
2016-09-22
- September 2016 AOSP Security Patch Level
2016-08-10
- August 2016 AOSP Security Patch Level
- Fix audio lag issue in games - thanks @$ideWinder
2016-07-10
- July 2016 AOSP Security Patch Level
- Re-tested exFAT with 32GB Sandisk microsd card and seems to work fine.
2016-06-14
- June 2016 AOSP Security Patch Level
- Added CIFS Support (Instructions here)
- Switch to using lastest update-kindle-37.5.4.4_user_544271020 binaries and boot.img
2016-05-30
- Fix Swipe for stock keyboard
- Added back fix for screen rotation glitch
2016-05-28
- May 2016 AOSP Security Patch Level
- Fixed bug: No way back from USB Charge Only Mode
2016-04-20
- Updated CM Code
2016-04-11
- Fix sdcard write access
2016-04-06
- Updated CM Code
- 01 April 2016 AOSP Security Patch Level
2016-04-04
- Updated CM Code
- Prevent recovery been overwritten: Modify build system to prevent recovery-resource.dat and recovery-from-boot.p from been generated. This needs testing preferably by people with the ability to boot TWRP.
- Fixed failure to mount /system partition error due to change in build system
2016-03-30
- Enable Bluetooth Low Energy Support
2016-03-29
- Updated CM Code
- Switch to using lastest update-kindle-global-37.5.4.2_user_542168620 binaries and boot.img
2016-03-11
- Updated CM Code
- 01 March 2016 AOSP Security Patch Level
- Updated FlashFire Flashing instructions on OP
2016-02-29
2016-02-19
- Updated CM Code
2016-02-03
- Updated CM Code
- 01 February 2016 AOSP Security Patch Level
2016-01-26
2016-01-20
2016-01-12
- Updated CM Code
2016-01-04
- Enable WiFi Display
2015-12-30-R01
- Fixed bug where FlashFire will fail to go from FireOS -> CM
2015-12-30
- Thanks to @chetta for testing and prompt feedback
- Reverted use of Google's prebuilt WebView for now (Too many issues)
- Clean Flash via TWRP Re-tested
- Google App Tested
- YouTube and NetFlix Re-tested
- Upgrade via TWRP re-tested
- FlashFire FireOS -> CM re-tested
2015-12-29-PM
- Fixed issue with GAPPS and SuperSU been overwritten on upgrade of ROM
2015-12-29-AM
- Fixed bug when using FlashFire where Gapps would not be preserved
- Use Google's Prebuilt WebView
- Update WebView to version 48.0.2564.48
- Updated CM code on 2015-12-29
- Re-tested ROM upgrade via TWRP, CM recovery and FlashFire
- Fixed Flash failure going from FireOS 5.1.1 -> CM
- Re-tested FlashFire functionality going from FireOS 5.1.1 -> CM
2015-12-23
- Fixed ability to use FlashFire to go from FireOS_5.1.1 to CM-12.1
- BLOCK_BASED_OTA is now enabled
- Updated CM code on 2015-12-22
2015-12-16
- Fixed screen-off animation rotation orientation
- Updated CM code
2015-12-11
- Fixed permissions on /system/etc/install-recovery-2.sh
- Implement fix for Play Video - thanks @diegocr
2015-12-10-PM
- Switch to using update-kindle-full_ford-37.5.4.1_user_541112720 binaries and boot.img
- New version of the selinux_permissive.ko module - thanks @k4y0z
- Added /system/etc/install-recovery-2.sh with the same content as /system/bin/install-recovery.sh
- Fixed Built-In Root Access (Privacy Guard)
2015-12-10-AM
- Fix problem with install-recovery.sh been overwritten
- exFAT should now work (was broken in the previous build)
- init.d now initialises correctly
- Enabled built in Root Access
- NuPlayer should now work correctly
- Fixed Camera Support (HDR mode is not working and not supported)
- Fixed Video Recording
- General Video Support should be good now
- I tested Netflix and YouTube
2015-12-09
- Switch to using update-kindle-37.5.2.2_user_522054520 binaries and boot.img
- Add kernel module to switch selinux operational mode to permissive - thanks @k4y0z
- This means SuperSU is now not required and much faster boot times
- Add exfat support
- Enable init.d support - thanks @k4y0z
- Remove GPS configs
- Removed NFC configs
- Removed GPS, telephony and NFC permission files
- Add further properties to disable some SIM/RIL related stuff
2015-12-04
- Fixed USB OTG - thanks @csolanol and @diegocr
- Updated CM Code
2015-12-02
- Fixed Bluetooth Audio
- Updated CM Code
2015-12-01
- Fixed Bluetooth - thanks @diegocr
- Enable Multi-user (5)
- Updated CM Code
2015-11-22
- Enable MTP
- Enable OTG Support
- Add properties to declare device has no radio
- Added configuration item to build for BLOCK_BASED or not.
- BLOCK_BASED build currently not flashing due to symlink error
- Add further config for MTK Bluetooth
- Fixed build errors in lib_driver_cmd_mt66xx private static lib
- Clean up config for WIFI
- Added IPv6 support
- Fixed battery stats - thanks @csolanol for providing the required power_profile.xml
2015/11/16
- This version will boot standalone - no more tethered boot
2015/11/15
- Initial Release

Frequency Asked Questions
Question 1:
How do I adjust the keyboard sound level?
Answer:
- Go to settings -> Languages & input -> Android Keyboard -> Advanced -> Keypress sound volume
- Then adjust the slider to your preferred level
Question 2:
Why does the screen image seem stretched or distorted?
Answer:
- The actual pixels in the Fire's LCD are not perfectly square
- That causes some distortion. It is particularly noticeable with round icons & when the screen rotates.
- This issue also effects the stock amazon OS as well as all custom roms.
- It is not yet known if this will be fixable in software (my current thinking is probably not)
Question 3:
Why is my brightness slider not working?
Answer:
- Try installing Brightness Level and use it to change brightness. After doing this brightness slider should work fine and you can remove Brightness Level.
Question 4:
When installing Google Play Games and Google Calendar I get error -505?
Answer:
- Install older versions from apkmirror then update from Google Play Store.
Question 5:
How do I use CIFS?
Answer:
See the guide here

Actual CM12.1 on the Fire 2015? So, a premium device for $50 with CM12.1? Awesome! Might have to pick one up now... I'd guess I don't have to fastboot each time I power on right? Just the first time to get CM/TWRP, then have CM/TWRP install+boot CM12.1, then I can get CM12.1 without fastboot?

bobbob1016 said:
Actual CM12.1 on the Fire 2015? So, a premium device for $50 with CM12.1? Awesome! Might have to pick one up now... I'd guess I don't have to fastboot each time I power on right? Just the first time to get CM/TWRP, then have CM/TWRP install+boot CM12.1, then I can get CM12.1 without fastboot?
Click to expand...
Click to collapse
- You will have to fastboot each time
- It's all in the OP including the reasons why this is the case at the moment.
- It's not ideal - but thought I would share what I have so far
- I am looking into solutions for this now.

- Links are now up

ggow said:
- You will have to fastboot each time
- It's all in the OP including the reasons why this is the case at the moment.
- It's not ideal - but thought I would share what I have so far
- I am looking into solutions for this now.
Click to expand...
Click to collapse
Thanks for the hard work!

Once booted into CM12.1 we can make general system configuration changes, install apps, etc, correct? And will changes be be retained if we need to reboot (through fastboot)? If so, where will CM12.1 files be stored?

blueberry.sky said:
Once booted into CM12.1 we can make general system configuration changes, install apps, etc, correct? And will changes be be retained if we need to reboot (through fastboot)? If so, where will CM12.1 files be stored?
Click to expand...
Click to collapse
- Yes customise as much as you want - all will be retained.
- Your data and OS is stored on the /data and /system partition respectively
- The only thing you have to reload on a reboot through fastboot is the modified_boot.img which won't affect anything else.

Awesome work @ggow!. @diegocr and me have been working on bring slimrom to this device. We are having some issues with WiFi and bluetooth. Would you mind to share your device and vendor for cyanogen?.
Thanks.

csolanol said:
Awesome work @ggow!. @diegocr and me have been working on bring slimrom to this device. We are having some issues with WiFi and bluetooth. Would you mind to share your device and vendor for cyanogen?.
Thanks.
Click to expand...
Click to collapse
Hi csolanol,
- I am in the process of updating my bibucket with the most recent changes
- Having trouble with bluetooth too.
- Wifi is working fine - I got it working like this:
- put this in your device tree
- then add this to your boardconfig.mk:
Code:
[INDENT]WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_WLAN_DEVICE := mediatek
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_mt66xx
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_mt66xx
WIFI_DRIVER_FW_PATH_PARAM:="/dev/wmtWifi"
WIFI_DRIVER_FW_PATH_STA:=STA
WIFI_DRIVER_FW_PATH_AP:=AP
WIFI_DRIVER_FW_PATH_STA:=P2P[/INDENT]
- Then add this to your device.mk or equivalent
Code:
[INDENT]# wifi
PRODUCT_PACKAGES += \
lib_driver_cmd_mtk[/INDENT]
- Do not include the propriertary bin/wpa_supplicant when building otherwise you will get a build error
- Instead copy it into your ROM after building.
- Hope this helps for now.

Didnt whats his face say he used the original boot.img file to flash permenatnly asop without using fastboot every time?

ggow said:
Hi csolanol,
- I am in the process of updating my bibucket with the most recent changes
- Having trouble with bluetooth too.
- Wifi is working fine - I got it working like this:
- put this in your device tree
- then add this to your boardconfig.mk:
Code:
[INDENT]WPA_SUPPLICANT_VERSION := VER_0_8_X
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_HOSTAPD_DRIVER := NL80211
BOARD_WLAN_DEVICE := mediatek
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_mt66xx
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_mt66xx
WIFI_DRIVER_FW_PATH_PARAM:="/dev/wmtWifi"
WIFI_DRIVER_FW_PATH_STA:=STA
WIFI_DRIVER_FW_PATH_AP:=AP
WIFI_DRIVER_FW_PATH_STA:=P2P[/INDENT]
- Then add this to your device.mk or equivalent
Code:
[INDENT]# wifi
PRODUCT_PACKAGES += \
lib_driver_cmd_mtk[/INDENT]
- Do not include the propriertary bin/wpa_supplicant when building otherwise you will get a build error
- Instead copy it into your ROM after building.
- Hope this helps for now.
Click to expand...
Click to collapse
Thanks, I will wait bitbucket update :good:

Awesomeslayerg said:
Didnt whats his face say he used the original boot.img file to flash permenatnly asop without using fastboot every time?
Click to expand...
Click to collapse
- Yes, that was me who said that but Amazon have changed things since then.
- On the HDX at the time they were not enforcing an selinux policy
- Now that Amazon are enforcing it cannot work in the same way at least for the moment until a workaround is found.

diegocr said:
Thanks, I will wait bitbucket update :good:
Click to expand...
Click to collapse
- Did you guys find a way of been able boot Slim without having to fastboot a boot image each time?

ggow said:
- Did you guys find a way of been able boot Slim without having to fastboot a boot image each time?
Click to expand...
Click to collapse
no, only fastboot

diegocr said:
no, only fastboot
Click to expand...
Click to collapse
@csolanol and @diegocr
I have linked my Device Tree in the OP.

ggow said:
@csolanol and @diegocr
I have linked my Device Tree in the OP.
Click to expand...
Click to collapse
Thanks a ton :good:

diegocr said:
Thanks a ton :good:
Click to expand...
Click to collapse
- I built my ROM without block based image generation
- This means you can extract the ROM and use the proprietary-files.txt with the extract-files.sh to re-generate the vendor tree