On this Omnirom 4.4 for N7000. Am I supposed to have to flash CMW every time I update the nightly. Currently on 1Dec build. Also these night lies unrooted me and I can not figure out how to root again. I am kind of a noob. So that leads to my last question. Since you were working on the CM 11 builds you know what's going on and when I had beta 6 flashed it didn't unrooted me or uninstall CWM. So is there a way to get those codes from CM 11 into the new Omniroms so we don't have to constantly reflash CWM and reroot. Thanks
-Omni rom comes with twrp recovery. You can flash the update using this recovery itself.
-For rooting you will need to flash supersu after you flash the ROM. This zip can be downloaded from the ROM thread.
-CM 11 for n7000 stopped at beta 6 for now till may be if cm team publishes a nightly.
Thanks
nokiamodeln91 said:
-Omni rom comes with twrp recovery. You can flash the update using this recovery itself.
-For rooting you will need to flash supersu after you flash the ROM. This zip can be downloaded from the ROM thread.
-CM 11 for n7000 stopped at beta 6 for now till may be if cm team publishes a nightly.
Click to expand...
Click to collapse
I have flashed CWM but every time I flash a new nightly it overwrites CWM and I have t reflash before I can flash a new nightly. Thanks about supersu. But what I meant about CM features. Herna was working on the beta 6 so why can't those CWM and root features be moved to Omnirom?
I don't think cwm will be used in omni as they have gone with twrp recovery. Most of the features will be integrated slowly
You font need to flash cwm every time. You can flash the zip file using the twrp recovery also.
nokiamodeln91 said:
I don't think cwm will be used in omni as they have gone with twrp recovery. Most of the features will be integrated slowly
You font need to flash cwm every time. You can flash the zip file using the twrp recovery also.
Click to expand...
Click to collapse
Cool thanks I thought the thread said you couldn't flash the Omnirom zip with twrp.
You cannot flash omni rom with a cwm version lower than 6.0.43. I guess. Twrp is fine.
Related
Hello. I recently installed Arco's recovery and ICS (cm9), but now I have to install a Gingerbread - based rom. Is Arco's recovery compatible with non - ics roms or do I have to flash the old cwm again?
Thanks.
xMirmo said:
Hello. I recently installed Arco's recovery and ICS (cm9), but now I have to install a Gingerbread - based rom. Is Arco's recovery compatible with non - ics roms or do I have to flash the old cwm again?
Thanks.
Click to expand...
Click to collapse
Hello I am using Arco too~~may I ask u that how to install the recovery and ICS?
I rooted Arco already, should I try to unlock the BL and then install an ICS ROM for LT18?
really dun know what to do....
thanks very much~~~
Can you still go to recovery? If you can reflash CM9 to get CWM back. If you don't flash a new kernel with odin
Well... if you install a new ROM your recovery gets lost so you'll have to flash it again anyway.
CWM 6
I've built a new recovery. Could someone test it? Here is the link: https://docs.google.com/file/d/0BwlE_OdJFnPgLUdUcG55R0dUMGs/edit#
You can flash it using broodplank's Quick Flasher or with dd command. Flash it at your own risk.
Hi,
Im on stock jellybean with an old philz recovery(initially added by flashing a zip)....i had planned to try out the new Mokee rom by Herna with split window which is a kitkat release. for this i tried to update my recovery to the latest by flashing the zip file from http://goo.im/devs/philz_touch/CWM_Advanced_Edition. .Unfortunately i went into bootloop .So i flashed my backup and everything was back to normal. Does the link give recovery +kernel or is it a plain recovery. Did i miss anything.. i would love to try out kitkat . Could anyone help me out with this issue..thanks!
http://forum.xda-developers.com/showpost.php?p=52333085&postcount=3960
Hello
I'm trying to flash PacROM 4.4 and I'm encountering a problem with "set_metadata_recursive: some changes failed".
As I searched its because of old recovery tools, but I'm already uusing CWM 4.4.1 and I cannot find out what to do.
The way I tried to flash ROM :
1. Flash stock .254 ROM
2. Install TowelRoot and CWM
3. Flash with CWM 4.4.1 and this is where error come up (kernel 207 works)
Thank you for help
edit: I managed to install VANIR ROM, and later with the same method I managed to install PAC ROM too. I used CWR not Philz.
Your problem was most likely related to your recovery, which was probably outdated.
CM based ROMs sometimes have issues with older versions of CWM.
The reason why it worked after installing Vanir is probably because of Vanir's kernel which includes a more recent version of CWM.
Anyway, glad you got it working.
I was updating My samsung galaxy s advance with cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) lollipop 5.1 but it doesnt work for me can i get help with that :crying: .Currently i have CyanogenMod 11 Kitkat 4.4 with CoCore-E-8.6.4-CWM kernel. i also have backed up my rom. i also have tried cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) with CoCore-E-6.8-TWRP and CoCore-E-r22-beta kernel but it does work for me please help me i am new with it :crying: .
Hope it's helps
Patil.sid101 said:
I was updating My samsung galaxy s advance with cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) lollipop 5.1 but it doesnt work for me can i get help with that :crying: .Currently i have CyanogenMod 11 Kitkat 4.4 with CoCore-E-8.6.4-CWM kernel. i also have backed up my rom. i also have tried cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) with CoCore-E-6.8-TWRP and CoCore-E-r22-beta kernel but it does work for me please help me i am new with it :crying: .
Click to expand...
Click to collapse
First i just want to say.. i'm not good at English.. sorry . I hope you understand what i said
You don't need to flash cocore kernel after flashing cm12.1. because Cocore is only for JB..
there is a new build of cm12.1 18/07 instead 08/07, here is the link http://hastalafiesta.altervista.org/cyanogenmod-12-1-i9070-180715/
Try this method to install cm 12.1:
Make sure the boot.cpio.gz deleted from efs folder
1. flash cm11 by Epirex latest version.. it has TWRP recovery or if you have CWM v6.0.43, you can skip this step
2. reboot to recovery
3 do full wipes (cache, data, dalvik, system)
4. install rom
5. install gapps
6. reboot to system.. and You're done.
Hope it helps..
Patil.sid101 said:
I was updating My samsung galaxy s advance with cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) lollipop 5.1 but it doesnt work for me can i get help with that :crying: .Currently i have CyanogenMod 11 Kitkat 4.4 with CoCore-E-8.6.4-CWM kernel. i also have backed up my rom. i also have tried cm12.1_janice-070715 (CyanogenMod 12.1 [08/07/2015]) with CoCore-E-6.8-TWRP and CoCore-E-r22-beta kernel but it does work for me please help me i am new with it :crying: .
Click to expand...
Click to collapse
I have a long procedure but it helped me a lot, first flash the stock ROM with the help of Odin and then download latest cm12.1 build and gapps from here http://hastalafiesta.altervista.org/cyanogenmod-12-1-i9070-180715/ download ukf (universal kernel flasher) from here http://forum.xda-developers.com/showthread.php?t=2137598
And download the root browser from play store. After flashing the stock ROM, root your phone, open root browser and extract the ROM somewhere, now open ukf and go where you extracted your ROM and then flash boot.img from the extracted files . after flashing go to recovery mod and you will see twrp. From there flash ROM and gapps,clear data ,cache,dalvik cache. From there restart your phone. First booting takes 15-30 mins , then you would get your 5.1.1, this method is long but effective
Anybody able to update their oneplus to stable version of marshmallow that just got released. I am having few troubles doing it
Downloading.....
Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.
COS13 will come in a week or two
help
drmuruga said:
Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.
Click to expand...
Click to collapse
can you tell how you flashed it . I tried to do it but got error message
Cos13 is better power and performance
Sent from my A0001 using Tapatalk
try it with twrp 2.8.6.0
Hope u got the error 7 ?
if it was then this can solve ur problem
all the very best mate
Twrp 3.0.0
Clean flash
Slim_zero_gapps.BETA.6.0.build.0.x-20160121-1447.zip
Wipe cache/dalwik
Reboot.
Thats all
Guys, from what I read in the op, I get the feeling that he is confusing the recent CM13 snapshot with CyanogenOS13.
@kaskoraja
What rom is on your device right now?
Can you update from oneplus official signed CM12s to CM13-SNAPSHOT without data wipe??
drmuruga said:
Twrp 3.0.0
Clean flash
Slim_zero_gapps.BETA.6.0.build.0.x-20160121-1447.zip
Wipe cache/dalwik
Reboot.
Thats all
Click to expand...
Click to collapse
I want to update instead of starting from scratch. I tried with snapshot and CWM recovery and I couldnt do it by both ways
I tried stock version with cm recovery and update via ota then install through cm recovery but not able to flash gapps which was not present in ota , then flash twrp recovery and flash gapps via twrp shown more fc , so I reflash everything now no problem till now
drmuruga said:
Cm-13.0-20160316-SNAPSHOT-ZNH0EAO1QB-bacon.zip (329.14 MB)
Downloaded and flashed , no issues till now. Gapps used = slim zero gapps 6.0.
Click to expand...
Click to collapse
How do I flash this? Thru Cyanogen recovery? thru TWRP? If thru TWRP, which version?
I flash through twrp 3.0.0 recovery.there is no gapps in update, when I first flash through cm recovery , I need twrp to flash gapps but that lead to many fc . so I flash through twrp clean flash of ROM, gapps through twrp 3.0.0 official recovery
COS13 is on the way. "That said, you'll find that 13 runs amazing on the OPO thanks to both improvements in M and also the low level stuff we improved this time around. COS13 for the OPO is in final QA+cert so it won't be much longer (a few days we hope)."
Source (read comments): https://plus.google.com/+SteveKondik/posts/RNMSi2t33yN
Why this is in Themes and Apps?
SirSoviet said:
Why this is in Themes and Apps?
Click to expand...
Click to collapse
Because noobs and weed...