Related
Here you are a 4.0.3 backup for CWM. Is stock (untouched) and non rooted. You can install it unzipping it in your SD root directory, and then boot onto CWM and select "Restore" inside "Backup & Restore" menu. Tested on i9023. DON'T USE IT ON NEXUS S 4G
http://www.multiupload.com/H0TCP2UPHX
Enjoy!
P.D: Do a backup before install this.
P.D.2: Do this will wipe your current installation.
P.D.3: You must use ClockWorkMod 5.0.0.0 or higher.
For real ! ? . . .
TY
Will this work on i9023?
thanks.. let me try it out
salvacion said:
Will this work on i9023?
Click to expand...
Click to collapse
read the first post.
installation aborted.
tried to installed on 9020 (Tmobile)
fatypaul said:
installation aborted.
tried to installed on 9020 (Tmobile)
Click to expand...
Click to collapse
Just for i9023 for now. So stop trying...
BTW, u must install it using the "backup & restore" option.
works for me on i9023...now i'm waiting a guide to root
Arkaknio said:
Just for i9023 for now. So stop trying...
BTW, u must install it using the "backup & restore" option.
Click to expand...
Click to collapse
My bad - I though 9020t and 9023 are comparable.
---------- Post added at 04:03 AM ---------- Previous post was at 04:02 AM ----------
bruciato said:
works for me on i9023...now i'm waiting a guide to root
Click to expand...
Click to collapse
There is a SU.install.zip out there (in XDA) for that.
Please report if root re-root is successful.
For this to work,do you need to go back to stock 2.3.6?
Or can you do it with any rom.
THanks
excuse me can somebody tell me if after they installed it messed their stock recovery...or does adb think ur i9020 now or somin..i read these problems in other threads thats y...
No need to go back or to install smth special. This backup will work for any rom.
yes pls someone tell me if this is messing with the stock recovery..? does adb or the recovery think ours is i9020...someone tell me if they are able to get into recovery after the install???
fatypaul said:
My bad - I though 9020t and 9023 are comparable.
---------- Post added at 04:03 AM ---------- Previous post was at 04:02 AM ----------
There is a SU.install.zip out there (in XDA) for that.
Please report if root re-root is successful.
Click to expand...
Click to collapse
su.zip flash mode via cwm doesn't work(for me)
bruciato said:
su.zip flash mode via cwm doesn't work(for me)
Click to expand...
Click to collapse
dude u have an i9023 right..? can u tel me after u installed this backup..are u able to get into stock recovery?
Play safe... don't try it until further release by cyanogen.
Accidentally sent from my Google Nexus S using XDA Premium
thanks.
only English language?
Nexus S i9023 _ICS
melvinchng said:
Play safe... don't try it until further release by cyanogen.
Accidentally sent from my Google Nexus S using XDA Premium
Click to expand...
Click to collapse
listen to this guy and be patient and wait for Cyanogen Mod team for a fresh rom and more informative thread then an unofficial quick thread like this one.
Guys dont use this. Wait for a ROM cuz this isnt rooted...you have to reroot cuz SU is present, but not actually working
Do not use this
very fast and smooth
no wifi working
no back button working
hello guys i just watch some videos and find flyme os interesting. it is ported to nexus 5 and working very well on it.
i want to know weather it is possible to port this rom from nexus 5 to our beloved htc one m7 and how much difficult it is. i have htc one m7 and ready to risk my phone for this port. if anyone have knowledge about porting and want to help me then please tell me. i am ready to help you in porting this rom to m7 and also test this rom on my m7.
weigeloveu1 said:
http://www.flyme.cn/firmwarelist.jsp?modelId=26&type=2
Click to expand...
Click to collapse
You can find it here
Can I flash that update.zip just like a regular custom ROM?
EDIT: Nevermind. I just did it and it worked.
pa gapps!
i have been trying to flash modular pa gapps on flyme os but everything i did that it show flyme os application crashing. Anyone has tried flashing gapps. Thanx.
I tried both Mini and Nano modules and both gave me fc.
Did you managed to get root?
I have flashed chainfire and kush superuser zip. They do flash successfully but the superuser apk gave me fc. I am confused. where to get started with. I will do some research later today to flash superuser and pa gapps. In the mean time if anyone found the way to achieve that please help us.
utsavkoju said:
i have been trying to flash modular pa gapps on flyme os but everything i did that it show flyme os application crashing. Anyone has tried flashing gapps. Thanx.
Click to expand...
Click to collapse
dushan90 said:
I tried both Mini and Nano modules and both gave me fc.
Did you managed to get root?
Click to expand...
Click to collapse
Can try these Gapps for FlyMe.
santod040 said:
Can try these Gapps for FlyMe.
Click to expand...
Click to collapse
Thank you for your response.
---------- Post added at 06:53 PM ---------- Previous post was at 06:44 PM ----------
[/COLOR]Finally, I got the gapps working along with the super su. A big Thanks to @santod040. Here is the step i followed.
1. Either flash the update.zip (link: http://www.flyme.cn/firmwarelist.jsp?modelId=26&type=2) or if you have already flashed the rom go to the recovery and erase the user data.
2. Flash this gapps. https://my.pcloud.com/publink/show?code=B3d.
3. Clear cache and dalvic cache.
4. Reboot your deivce.
5. Voila. You will have working super user and gapps.
YunOS for Nexus 5INFO
YunOS port for Nexus 5 [Most of UI is in English]
Flashing Info-Make sure you have a custom recover (TWRP/CWM)
-Wipe everything but external/internal storage
-Move the ROM zip to your device
-Flash it and reboot
-ENJOY!!
Works with Multiboot
Credits-YunOS team
-XDA for such a great platform
-Google
-Coffee
Known Issues-Have not seen any issues but if you do , please provide as much information as possible and/or logcat
DOWNLOAD LINKhttps://docs.google.com/file/d/0B-7TTGzIyuHnbGF5Nno2REpEczA/edit?usp=docslist_api
ScreenshotsSee the attachments
Hit the thanks if you find my post helpful !
There's not enough info man. It looks nice though. But for example, is this 4.4.4 base or 5.0? It looks like 5.0, but it could have been heavily themed too.
TheLastSidekick said:
There's not enough info man. It looks nice though. But for example, is this 4.4.4 base or 5.0? It looks like 5.0, but it could have been heavily themed too.
Click to expand...
Click to collapse
lol I was too tired to write more info and its heavily themed but its beautiful and stable .
I'll be flashing this with multirom to try it out, looks like a pretty iOS themes skin.
After Lollipop hits, I don't think I'll go for any other roms beside Android native. Reason being with these types of rom, they try to imitate iOS look and feel which I don't like. (this and MIUI)
You should've uploaded the file before making the thread
Mawtin said:
You should've uploaded the file before making the thread
Click to expand...
Click to collapse
Its up now you can download it sorry my internet went down :/.
Is something wrong with the download link? I can't download this.
Sent from my Nexus 5 using XDA Free mobile app
how is this rom ? have anyone tried ?
jworkcoo said:
Is something wrong with the download link? I can't download this.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Links working fine brother if you still cant get it PM me i will make a mirror for ya
Which version of pa_gapps works best with this?
---------- Post added at 07:19 AM ---------- Previous post was at 07:17 AM ----------
[/COLOR]
cyrealkiller said:
Which version of pa_gapps works best with this?
Click to expand...
Click to collapse
I think the gaaps are included in the rom as per the instructions no mention of installing gapps
I can not install rom
Root?
Its working fine it does flash well Can you tell me what error are you getting ?:|
nkhanh said:
I can not install rom
Click to expand...
Click to collapse
what error are you getting Sir?
What gapps?
Can we flash this with Lollipop bootloader?
giarcs said:
What gapps?
Click to expand...
Click to collapse
I have flashed pa_gapps .4.4.4 and it gave me FC issues trying to setup my google account. According to what I have read One+ has a similar YunOS version and accordingly its based on Android 4.4.2, so I am thinking maybe pa_gapps 4.4.2 is compatible with this. I will try to flash using MultiROM and feedback later what happens.
hashlikeageek said:
Its working fine it does flash well Can you tell me what error are you getting ?:|
Click to expand...
Click to collapse
Me too am unable to install with latest TWRP recovery!! Anyone else?
I'm so sorry but this thread has already moved to http://forum.xda-developers.com/redmi-note/development/rom-resurrection-remix-redmi-note-4g-t3393516 ...since I'm retired in few months ago ^_^
Thanks to @ashishkotnala29 for help me to continue dior project for Official Resurrection Remix ^_^
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
peepee999 said:
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on next build will came out for v5.6.6 .
will upload it ASAP
Sent from my HM NOTE 1LTE using Tapatalk
Wow so excited! Waiting patiently! Thank you
Sent from my HM NOTE 1LTE using Tapatalk
that facebook apk work?
So far it is a very nice rom in my use of it. Tested camera, flash, gps, speakers, notification lights, many apps (including installing facebook app and logging in, but not actually using it more than that), etc. So far so good. Everything seems to be working. Thank you very much msfkonsole for making it available.
(Edit: backlights on soft buttons are working fine; no problem.)
yeah,,facebook work fine..
the loud speaker when call/get call not loud as always..it seem normal or without use load speaker
Its good news.....thanx mate
Sent from my Redmi Note 3 using Tapatalk
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Fantastic ROM
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
I want to know how to download it?
Sent using XDA One
kul.rohan said:
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Click to expand...
Click to collapse
1. The Status bar is definitely transparent on my phone. (Did you do a clean install?)
2. I also haven't gotten the weather to work.
3. Lockscreen wallpaper does not change for me either.
I'd also like to be able to adjust the soft buttons backlight brightness like I could in CM12.1.
But all those are only very minor problems, and this is proving to be a very good rom for me.
---------- Post added at 02:37 PM ---------- Previous post was at 02:27 PM ----------
AdliHebat said:
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!I8FzHTiQ!ptfcpHmTpLo7l-xH_vDySpLVasaXDvaeyzAIT578Qjo If that doesn't work, maybe download it again and put it in the root of the internal memory. I don't know what else to suggest.
Edit: I just installed latest 5.6.6 using Philz Touch with rom in root folder of external SD card. No problem.
bingoyang said:
I want to know how to download it?
Sent using XDA One
Click to expand...
Click to collapse
Try this to get the newest version 5.6.6: https://basketbuild.com/devs/resurrectionremix/dior You will also need this kernel patch: https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip. Just flash the patch after your flash the rom.
nz_mincemeat said:
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Click to expand...
Click to collapse
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
Edit: reboot solved that problem, but I don't know why it happened in the first place.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
Nasrun said:
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Click to expand...
Click to collapse
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
twrock said:
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
Click to expand...
Click to collapse
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Nasrun said:
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Click to expand...
Click to collapse
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
twrock said:
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
Click to expand...
Click to collapse
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Nasrun said:
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Click to expand...
Click to collapse
Hmm, strange. This file, edgefix_20160403.zip, right?
I'm using CWM based Philz Touch Recovery, but I don't know if that is the issue or not. If you were able to flash the rom, I can't see why you can't flash the edgefix update.
I'm having a few weird troubles though. Twice today I had the screen freeze for a time, and then when it came back, it was jumping around as if an invisible finger was touching all over the screen randomly. I had to force a reboot both times. That's not a minor bug. Also, I've had it turn on in my pocket and start to do pocket-dialing. At least I can hear it when that starts. Is there a setting to eliminate pocket dialing?
Edit: Ah, I see that 20160406 is released. Maybe I'll give that a try and see if it still has those problems.
Good bye
Reserve
reserve
reserve 2
---------- Post added at 10:30 PM ---------- Previous post was at 10:16 PM ----------
reserve #3
Thanks a lot man! Ill test it right now!
I flashed the S6E+ boot img after flashing the rom but the soft keys are not working. I tried it twice with a full wipe
XDA_Waghmare said:
I flashed the S6E+ boot img after flashing the rom but the soft keys are not working. I tried it twice with a full wipe
Click to expand...
Click to collapse
What model do u have? I only have this tested on 928F
SafetyHazard said:
What model do u have? I only have this tested on 928F
Click to expand...
Click to collapse
I tried it on 982F as well
XDA_Waghmare said:
I tried it on 982F as well
Click to expand...
Click to collapse
I'm not sure then, I don't own an s6e+ but my testeres said they work many times
XDA_Waghmare said:
I tried it on 982F as well
Click to expand...
Click to collapse
I have also a 928F and I can confirm The Capacitive button work
You Should follow the instruction
-> Wipe
-> Install ROM
-> Install Kernel (as an IMG)
-> Install GAPPS
-> Root Supersu is better
and BOot your rom
follow the guide for Sim Error
and Voila
work on g9287?
lyonscl1121217 said:
work on g9287?
Click to expand...
Click to collapse
Not tested on anything other then G928f.
we would love it if you would test and tell us
G928L tested
Kings Android said:
G928L tested
Click to expand...
Click to collapse
Did you encounter any bugs? Could you give a bit more details?
Google Play Servce issues
I'm testing on G928G, everthing fine for now, including the mobile data, but i have issues with Gapps, i tried install 3 different Gapps, but all is force close the Google Play Service and another small services.
Does anyone have a link to a Gapps that work with Lineage 14.1 ??
** Sorry for my english.
cjunior_1091 said:
I'm testing on G928G, everthing fine for now, including the mobile data, but i have issues with Gapps, i tried install 3 different Gapps, but all is force close the Google Play Service and another small services.
Does anyone have a link to a Gapps that work with Lineage 14.1 ??
** Sorry for my english.
Click to expand...
Click to collapse
here the gapps
http://opengapps.org/
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
so i tested the rom runs very good fingerprint and the stock samsung camera are the only things i miss..
battery life is okay is a very good port
sim fix and bluetooth in next update? i use this rom when it gets updates
Soo sweet to see AOSP Nougat on my phone! Everything's working fanfu***ngtastic! Only issue is my GPS doesn't work.
Thanks so much for this!
G928F
OpenGapps stock
gtaelbordo said:
here the gapps
http://opengapps.org/
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
so i tested the rom runs very good fingerprint and the stock samsung camera are the only things i miss..
battery life is okay is a very good port
sim fix and bluetooth in next update? i use this rom when it gets updates
Click to expand...
Click to collapse
Don't expect quality . we may get close to it but definetly not exactly
SafetyHazard said:
Don't expect quality . we may get close to it but definetly not exactly
Click to expand...
Click to collapse
what? close to what? sry i dont understand
Gonna seem like a proper noob but how exactly do I flash kernel??
saxobully said:
Gonna seem like a proper noob but how exactly do I flash kernel??
Click to expand...
Click to collapse
In TWRP select install image its on the bottom when u press install