Hey guys,
Every time I try to flash a 4.4 rom whether it was Beanstalk or pure cyanogen 11 I got the same error while it I was flashing.
set_metadata_recursive: some changes failed
Then it says error in the file (status 7) installation aborted.
The only thing i could think of is that I am not s-off and I didn't see any requirements for that or anything else.
Thanks for any help.
jerham2010 said:
Hey guys,
Every time I try to flash a 4.4 rom whether it was Beanstalk or pure cyanogen 11 I got the same error while it I was flashing.
set_metadata_recursive: some changes failed
Then it says error in the file (status 7) installation aborted.
The only thing i could think of is that I am not s-off and I didn't see any requirements for that or anything else.
Thanks for any help.
Click to expand...
Click to collapse
I am afraid it's because of the recovery. It needs 2.6.3.3 recovery which isn't available for Sprint yet
Sent from my HTCONE using Tapatalk
elvisypi said:
I am afraid it's because of the recovery. It needs 2.6.3.3 recovery which isn't available for Sprint yet
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
Well i looked up status 7 error and got a fix for deleting some of the script for the rom, but that didn't even start the installation of the rom so I guess i'll give up for now.
Also, if that recovery isn't available then how are people flashing these roms? I would assume because they are developers.
Hardly a definitive answer (because I don't use the ROM in question), but you could consider using a different recovery such as CWM. That said, I'm running the GE 4.4 port, so take with a grain of salt.
jerham2010 said:
Hey guys,
Every time I try to flash a 4.4 rom whether it was Beanstalk or pure cyanogen 11 I got the same error while it I was flashing.
set_metadata_recursive: some changes failed
Then it says error in the file (status 7) installation aborted.
The only thing i could think of is that I am not s-off and I didn't see any requirements for that or anything else.
Thanks for any help.
Click to expand...
Click to collapse
I have flashed all the 4.4 ROMs in developmental except Beanstalk on TWRP 2.6.3.0.
I'm running beanstalk without any problems, update TWRP to the last version
Terramoto said:
I'm running beanstalk without any problems, update TWRP to the last version
Click to expand...
Click to collapse
is the only way to switch to twrp through the bootloader? i'm running cwm right now. I know there is a way to go through goo manager but the file never downloads to install twrp to begin with. I'm just not destined to run 4.4 i guess!
Anyways, Thanks for all your guys help.
jerham2010 said:
is the only way to switch to twrp through the bootloader? i'm running cwm right now. I know there is a way to go through goo manager but the file never downloads to install twrp to begin with. I'm just not destined to run 4.4 i guess!
Anyways, Thanks for all your guys help.
Click to expand...
Click to collapse
I read somewhere you cant use goomanager now to flash TWRP, bootloader seems to be the only option unless there's a way to flash it through CWM...
Terramoto said:
I read somewhere you cant use goomanager now to flash TWRP, bootloader seems to be the only option unless there's a way to flash it through CWM...
Click to expand...
Click to collapse
Why not use a terminal emulator app? Although I have ran quite a bit of Kitkat roms and they all work for me.
Try this:
http://www.hasoon2000.info/?developer=One (M7,T-Mobile,ATT,Sprint)
Get the latest update of TWRP:
http://forum.xda-developers.com/showthread.php?t=2236620
Take that .img, rename it one word and put in the recoveries file in the AIO folder. Then use the tool to flash your updated recovery. It's what I did.
Related
Hi Guys, I got my Incredible S (IS) successfully S-OFF using the beta of AlphaRev X.
I made the donation because the work the AlphaRev X have done is great
I used the http://forum.xda-developers.com/showthread.php?t=1122694 to install the clockworkmod and recovery, and it was completely successful. What I did is I obtain the right Clockworkmod Recovery for my IS I have now the ClockworkMod Recovery v4.0.0.1 on my Incredible S.
New the two problem I am facing is:
1- When I flash a language package (so that I will be able to read Arabic using the same original ROM which comes with the device) , the installing gets aborted and unsuccessful. Although, I used the same language packaged which I used it for my old Desire HD and now both are Froyo .
The message I gets on Recovery page is :
-- Installing : /sdcard/Arabic_DHD_2.2.1 _FIX_Browser_RTL. Zip
Finding update package…
Opening update package…
Installing update …
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the clockworkMod 3.0 Ginger bread based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update Zip Package .
Installation aborted
Well, I don’t know that all mean and I don’t know how I would fix this. It seems so complicated
Please would any Developer out there help!
2- I tried to flash a custom ROM by LeeDrOiD_HD_V 2.2.3, but also didn’t work. The message I gets is:
-- Installing : /sdcard/LeeDrOiD_HD_V2.2.3. Zip
Finding update package…
Opening update package…
Installing update …
Checking Model ID
Assert failed: getprop(“ro. product .device”) ==”
ace” II getprop (“ro.build.Product”)==”ace” II
getprop(“ro.product.board”) ==”ace”
E:Error in /sdcard/ LeeDrOiD_HD_V2.2.3. Zip
(Status 7)
Installation aboard.
Please would anyone of developer help me in getting this issue fixed. I really would appreciate it the effort and the reply. All I care about is the a ROM ( cocked or custom ROM) which can read Arabic and not losing the S-OFF I have got from AlphaRev X. thank you for your time and you support! I tried to post my question through the XDA Incredible S developer sub-forums link, but it refused. Please would anyone help me! Thanks for reading my email.
Waleed
Did u try this rom:
http://forum.xda-developers.com/showthread.php?t=1088498
Thanks for the reply. No, I didn’t try. Do you think this will solve the flashing issue.?
Are you on Froyo or GB now?
Sent from my HTC Incredible S using XDA Premium App
And btw is it rooted or did u just install clockworkmod revovery?
Sent from my HTC Incredible S using XDA Premium App
cod3x said:
Are you on Froyo or GB now?
Sent from my HTC Incredible S using XDA Premium App
Click to expand...
Click to collapse
I'm still on the original HTC and Bell Canada stock ROM and I am trying to flash ROM supported Arabic Language.
cod3x said:
And btw is it rooted or did u just install clockworkmod revovery?
Sent from my HTC Incredible S using XDA Premium App
Click to expand...
Click to collapse
I believe I got it already rooted and installed recovery for the IS from http://forum.xda-developers.com/showthread.php?t=1122694 (Root and Recovery) but still working on the flashing Arabic thing. would you please tell me how I would check whether I have already permanent root in my device or not? Because it seems I do have but I need to check to make sure I did. For root thing I followed the instruction in http://forum.xda-developers.com/showthread.php?t=1122694 (Root and Recovery) and Installed the “su-2.3.6.1-ef-signed.zip” file and it was successful.
faryanwo1 said:
I believe I got it already rooted and installed recovery for the IS from http://forum.xda-developers.com/showthread.php?t=1122694 (Root and Recovery) but still working on the flashing Arabic thing
Click to expand...
Click to collapse
Did u do this?
To root:
Copy su-2.3.6.1-ef-signed.zip to your sdcard root
Start clockworkmod recovery (instructions below)
Select "install zip from sdcard"
Then select "Choose zip from sdcard"
Then select "su-2.3.6.1-ef-signed.zip"
Then select "Yes - install su-2.3.6.1-ef-signed.zip" to confirm
Then go back
Then reboot.
You're rooted!
Yes, this is what exactly I did.
faryanwo1 said:
Yes, this is what exactly I did.
Click to expand...
Click to collapse
Okay, then u are rooted....
Did u try the official RUU
http://www.filefactory.com/file/ca317d4/n/RUU_Vivo_HTC_ARA_1.43.415.3_R_Radio_20.27.30.0802U_38.03.01.08_M_release_176683_signed.exe
No, you think this will solve the problem and would you please explain how this would solve the issue. thanks!
Woww, wait, I did and I got the stupid error 130 that really frustrating me. Hooooo. I have been getting this error since the gold card. Ow yeah I forgot to mentioned, I even tried the everything you could think of “even gold card and no success so far”
cod3x said:
Okay, then u are rooted....
Did u try the official RUU
http://www.filefactory.com/file/ca317d4/n/RUU_Vivo_HTC_ARA_1.43.415.3_R_Radio_20.27.30.0802U_38.03.01.08_M_release_176683_signed.exe
Click to expand...
Click to collapse
I believe if I flash this official HTC ROM , I will eventually lose the S-OFF by AlphaRev X
faryanwo1 said:
I believe if I flash this official HTC ROM , I will eventually lose the S-OFF by AlphaRev X
Click to expand...
Click to collapse
That's right...
Right. Also recovery too. Don't try it unless neccesary. It requires great effort to get the things back to position.
If you read carefully it says that it cannot flash because you are trying to flash desire hd roms... go over to the inc s dev section and pick one there.
Desire HD roms will not work on the incs.
However you can try and edit the update script that it reads vivo instead of ace.
Im not responsible for failure hh
Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance
Either the rom is not the IncS version or the file was damaged during download possibly from using a dl manager. Just try a different rom.
Is your phone S-OFF?
itsbeertimenow said:
Either the rom is not the IncS version or the file was damaged during download possibly from using a dl manager. Just try a different rom.
Click to expand...
Click to collapse
I hav downloaded 2 tyms..but im often gettin Installation aborted
jkolner said:
Is your phone S-OFF?
Click to expand...
Click to collapse
S ofcourse its s-off
santhoshpirate said:
Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance
Click to expand...
Click to collapse
Are you sure you found that rom in incredible S forum?
santhoshpirate said:
Pyramid 3d v7.9.1XE with android 2.3.4
At status 1 installation gets aborted
really pissed off
help me
thanks in advance
Click to expand...
Click to collapse
OP might be right. What I have experienced with my IS is that every single ROM I install, it never boots into the newly flashed ROM.
I have got S-Off, obviously. THX for asking.
I gained S-Off via revolutionary method, am able to flash any CM7 nightlies, it boots fine, but as soon as I flash any other Sense ROM, I dont get my phone to boot into the ROM.
When I flash the ROM, it finishes, atleast it displays the message at the end, and then it reboots, and stuck at the HTC Logo.
I pull out the battery, relaunch Recovery again, reload either CM7 or the Default Stock ROM using nandroid backup and get the phone to work... but custom ROMs are impossible to flash and boot into.
Any inputs by anyone?
I don't think I haven't followed the S-Off method incorrectly as I am able to flash CM7 and I also have got Root Access.
Thx in advance.
Cheers!!!
lundberg512 said:
Are you sure you found that rom in incredible S forum?
Click to expand...
Click to collapse
s i found tat one in incredible s forum
santhoshpirate said:
s i found tat one in incredible s forum
Click to expand...
Click to collapse
Have you tried flashing other roms or is it just one that doesnt work?
santhoshpirate said:
I hav downloaded 2 tyms..but im often gettin Installation aborted
Click to expand...
Click to collapse
Hey mate, did you check the md5 sum matches?
In CWM:
Format System
Format Data
Format Cache
Wipe Data/Factory Reset
Then Flash you rom, reboot and wait for it all to install.
Are you wiping the dalvik cache and doing a full wipe before installing? And have you checked to see whether you have signified checking on or off?
Well... I was using this http://forum.xda-developers.com/showthread.php?t=1818502 and it works.
Then used http://forum.xda-developers.com/showthread.php?t=1826378
to install the latest CM10.1 nightly file, then failed(some problem with the zip file?), the usb mounting wont work. Then when I reboot recovery I gone back into normal recovery. And I cant install anything nor mount my USB to the default recovery.
Now I'm stuck. Some help please?
KiD3991 said:
Well... I was using this http://forum.xda-developers.com/showthread.php?t=1818502 and it works.
Then used http://forum.xda-developers.com/showthread.php?t=1826378
to install the latest CM10.1 nightly file, then failed(some problem with the zip file?), the usb mounting wont work. Then when I reboot recovery I gone back into normal recovery. And I cant install anything nor mount my USB to the default recovery.
Now I'm stuck. Some help please?
Click to expand...
Click to collapse
You really haven't given much informaton to go on. Basics with any help request;-
What are you trying to achieve?
What version are you running?
What ROM were you on before?
Rooted?
Bootloader locked or unlocked?
What recovery have you installed?
EXACT error message - this is the single most important detail!!
There are plenty of guides around if you are trying to get from 'Stock' to CM10.1;-
Upgrade to 'Stock' JB first
Root
Unlock bootloader
Install CWM (v6.0.3.1)
Install CM from zip
Install gApps from zip
.....
Profit
SimonTS said:
You really haven't given much informaton to go on. Basics with any help request;-
What are you trying to achieve?
What version are you running?
What ROM were you on before?
Rooted?
Bootloader locked or unlocked?
What recovery have you installed?
EXACT error message - this is the single most important detail!!
There are plenty of guides around if you are trying to get from 'Stock' to CM10.1;-
Upgrade to 'Stock' JB first
Root
Unlock bootloader
Install CWM (v6.0.3.1)
Install CM from zip
Install gApps from zip
.....
Profit
Click to expand...
Click to collapse
My bad.
I want to install Cm10.1
running on stock rooted v10e
Rooted yes.
My device is SEA, not sure if I unlocked bootloader...(might be the problem)
The recovery i stated on my question.
I now can only hope lg support tool can help me out.
Because I might forgot bootloader and my device is already wiped out clean(so i cant even return to stock because the whole device is empty).
edit:
Figured out how to enter download mode... haha
Will keep Continue my effort!
I've gone through hell Unlocking Sensation XE, 4X wont beat me!
SimonTS said:
There are plenty of guides around if you are trying to get from 'Stock' to CM10.1;-
Upgrade to 'Stock' JB first
Root
Unlock bootloader
Install CWM (v6.0.3.1)
Install CM from zip
Install gApps from zip
.....
Profit
Click to expand...
Click to collapse
KiD3991 said:
My bad.
I want to install Cm10.1
running on stock rooted v10e
Rooted yes.
My device is SEA, not sure if I unlocked bootloader...(might be the problem)
The recovery i stated on my question.
I now can only hope lg support tool can help me out.
Because I might forgot bootloader and my device is already wiped out clean(so i cant even return to stock because the whole device is empty).
Click to expand...
Click to collapse
Highlighted in red for a very good reason. You'll need to reflash your stock v10e first, yet again there are guides on how to do this. Once you have the phone back up and running on v10e then read carefully and make sure you understand all the steps before trying again
SimonTS said:
Highlighted in red for a very good reason. You'll need to reflash your stock v10e first, yet again there are guides on how to do this. Once you have the phone back up and running on v10e then read carefully and make sure you understand all the steps before trying again
Click to expand...
Click to collapse
Via LG mobile supporter I'm installing 20a or something. Then I will redo it. Thanks for your effort in helping. Hahaha. :good:
Tearing my hair out a little with this one.
Out of the box my phone was a UK GSM HTC One, which I gather is the 'm7' when I'm in this company
I've unlocked the handset with the HTC Developer unlock instructions
I've installed ClockworkMod recovery 6.0.4.8 (as per the note on CyanogenMod site, re new partition structure)
I've rooted with SuperSU.zip
I've not got S-OFF (I'm unclear as to the value of going that far; although I have done with previous phones)
I can get to the bootloader fine; I can switch to fastboot; I can issue fastboot commands; I can get to recovery and do all the recovery stuff; I can issue adb sideloads
What I DON'T seem to be able to do, is install any ROM other than cm-11-20140504-SNAPSHOT-M6-m7.zip . Any other ROM I try (later CM snapshots; Android Revolution HD; deodexed Stock ROM (from Android Rev site)), all give me installation errors....
I get the errors if I;
- Try a CM update from within CM in the Settings/Updates menus
- Reboot to recovery and do a zip install from recovery (zip previously downloaded to phone)
- ADB sideload from recovery
Can ANYONE think of anything I'm not doing; or that I'm doing incorrectly, that might be causing this?
It's driving me nuts!
OpusLefteye said:
Tearing my hair out a little with this one.
Out of the box my phone was a UK GSM HTC One, which I gather is the 'm7' when I'm in this company
I've unlocked the handset with the HTC Developer unlock instructions
I've installed ClockworkMod recovery 6.0.4.8 (as per the note on CyanogenMod site, re new partition structure)
I've rooted with SuperSU.zip
I've not got S-OFF (I'm unclear as to the value of going that far; although I have done with previous phones)
I can get to the bootloader fine; I can switch to fastboot; I can issue fastboot commands; I can get to recovery and do all the recovery stuff; I can issue adb sideloads
What I DON'T seem to be able to do, is install any ROM other than cm-11-20140504-SNAPSHOT-M6-m7.zip . Any other ROM I try (later CM snapshots; Android Revolution HD; deodexed Stock ROM (from Android Rev site)), all give me installation errors....
I get the errors if I;
- Try a CM update from within CM in the Settings/Updates menus
- Reboot to recovery and do a zip install from recovery (zip previously downloaded to phone)
- ADB sideload from recovery
Can ANYONE think of anything I'm not doing; or that I'm doing incorrectly, that might be causing this?
It's driving me nuts!
Click to expand...
Click to collapse
Flash TWRP recovery, version 2.6.3.3, not the latest via fastboot and enjoy
Can't think of a good sig
donkeykong1 said:
Flash TWRP recovery, version 2.6.3.3, not the latest via fastboot and enjoy
Can't think of a good sig
Click to expand...
Click to collapse
For my own satisfaction; why not the latest TWRP?
Thanks though. That sounds like a pretty decisive answer!
Also. For future reference, was the way I laid out my question clear and should I include any other details?
OpusLefteye said:
For my own satisfaction; why not the latest TWRP?
Thanks though. That sounds like a pretty decisive answer!
Also. For future reference, was the way I laid out my question clear and should I include any other details?
Click to expand...
Click to collapse
Latest TWRP has some problems with flashing kitkat ROMs.Version 2.6.3.3 is proven to work with every ROM out there. The best thing to do if you have a problem with your phone is to explain your issue as short as possible and post fastboot getvar all. Your post was fine, but for future reference, and let's hope you won't need it, fastboot getvar all is a great help
Can't think of a good sig
donkeykong1 said:
Latest TWRP has some problems with flashing kitkat ROMs.Version 2.6.3.3 is proven to work with every ROM out there. The best thing to do if you have a problem with your phone is to explain your issue as short as possible and post fastboot getvar all. Your post was fine, but for future reference, and let's hope you won't need it, fastboot getvar all is a great help
Can't think of a good sig
Click to expand...
Click to collapse
UPDATE - Latest CM11 snapshot in and running nicely Thanks donkeykong1
OpusLefteye said:
UPDATE - Latest CM11 snapshot in and running nicely Thanks donkeykong1
Click to expand...
Click to collapse
You're welcome [emoji106]
Can't think of a good sig
It's already rooted/unlocked bootloader but, I did everything alright and this is what happened.
can someone help me get if fixed ? thanks
obs: it didn't brick or anything.. just fails when I try to upgrade.
This is what's written:
Updating partition details...
Installing '/sdcard/Blur_Version.212.44.22.ghost
checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Package expects build fingerprint of motorola/gh
E: Error executing updater binary in zip '/sdcard
Error flashing zip '/sdcard/Blur_Version.212.44.
Updating partition details...
FAILED.
HomeWipe cache/dalvik Robot System
Liooh said:
It's already rooted/unlocked bootloader but, I did everything alright and this is what happened.
can someone help me get if fixed ? thanks
obs: it didn't brick or anything.. just fails when I try to upgrade.
This is what's written:
Updating partition details...
Installing '/sdcard/Blur_Version.212.44.22.ghost
checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Package expects build fingerprint of motorola/gh
E: Error executing updater binary in zip '/sdcard
Error flashing zip '/sdcard/Blur_Version.212.44.
Updating partition details...
FAILED.
HomeWipe cache/dalvik Robot System
Click to expand...
Click to collapse
Sorry, I didn't mark the Q question.
Liooh said:
Sorry, I didn't mark the Q question.
Click to expand...
Click to collapse
Are you sure of the file your attempting to use.? Maybe you have an FXZ zip file, and you would need to flash with RSDLite or adb..not TWRP..double check what you are attempting..
Also..make sure you are using the correct file for your device..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
NWKENT said:
Are you sure of the file your attempting to use.? Maybe you have an FXZ zip file, and you would need to flash with RSDLite or adb..not TWRP..double check what you are attempting..
Also..make sure you are using the correct file for your device..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
Click to expand...
Click to collapse
I've wondered that too but I'm using the one that was recommended. The one with the Lite I already did and it proceeded well.
Do you know where I can find more files like that then ? (not firmwares)
Liooh said:
I've wondered that too but I'm using the one that was recommended. The one with the Lite I already did and it proceeded well.
Do you know where I can find more files like that then ? (not firmwares)
Click to expand...
Click to collapse
OMGoodness.. I'm not really sure Sir..I have a XT1060 DEV..but I haven't kept up with the Moto X lately (in the past month)..So..I'm not really the one to help you with newer versions..Are you sure 4.4.3 is right for your device.?
I'd suggest do research in here (XDA) and know what is the latest..I'm assuming that you are trying to flash an OTA..but if you have a file someone has "ported" or something of that nature..go back to where you downloaded the file and research..
Even if you have an OTA zip..I'd suggest maybe know the file more, maybe it should be unzipped and run an XML file..I honestly am not familiar with the file you are attempting to use..
Maybe post a link to where you found the file and myself and others can go look at what file and its purpose..then maybe we can assist you more..Sorry I can't help you more at this time..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
NWKENT said:
OMGoodness.. I'm not really sure Sir..I have a XT1060 DEV..but I haven't kept up with the Moto X lately (in the past month)..So..I'm not really the one to help you with newer versions..Are you sure 4.4.3 is right for your device.?
I'd suggest do research in here (XDA) and know what is the latest..I'm assuming that you are trying to flash an OTA..but if you have a file someone has "ported" or something of that nature..go back to where you downloaded the file and research..
Even if you have an OTA zip..I'd suggest maybe know the file more, maybe it should be unzipped and run an XML file..I honestly am not familiar with the file you are attempting to use..
Maybe post a link to where you found the file and myself and others can go look at what file and its purpose..then maybe we can assist you more..Sorry I can't help you more at this time..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
Click to expand...
Click to collapse
It was an youtube video, his device is the same as mine XT1058, his device went perfectly.
Liooh said:
It was an youtube video, his device is the same as mine XT1058, his device went perfectly.
Click to expand...
Click to collapse
Oh..OK..maybe contact that one to help you..go back to the video and post a comment/question..maybe someone there can help..
Also maybe post a link here..and we can go look ourselves and maybe help you.?
Also..make sure you have a good download..not corrupted..
Sent from my:
(Jaocagomex debloated)
4.4_19.6.3 (Unlocked)
XT1080M Droid Maxx #2
http://waynekent.com/page6.html
Whatever you are trying to flash can't be flashed with twrp so there's problem number one...
Sent from my XT1060
Liooh said:
It's already rooted/unlocked bootloader but, I did everything alright and this is what happened.
can someone help me get if fixed ? thanks
obs: it didn't brick or anything.. just fails when I try to upgrade.
This is what's written:
Updating partition details...
Installing '/sdcard/Blur_Version.212.44.22.ghost
checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Package expects build fingerprint of motorola/gh
E: Error executing updater binary in zip '/sdcard
Error flashing zip '/sdcard/Blur_Version.212.44.
Updating partition details...
FAILED.
HomeWipe cache/dalvik Robot System
Click to expand...
Click to collapse
Yep, @rocketsaucev2 is right. You appear to be attempting to flash the update.zip from custom recovery. It is well documented that you must have STOCK recovery in order to flash an official update.zip
samwathegreat said:
Yep, @rocketsaucev2 is right. You appear to be attempting to flash the update.zip from custom recovery. It is well documented that you must have STOCK recovery in order to flash an official update.zip
Click to expand...
Click to collapse
It's already STOCK.
Isn't the 4.4.2 you're talking about ?
Liooh said:
It's already STOCK.
Isn't the 4.4.2 you're talking about ?
Click to expand...
Click to collapse
No, it isn't. The screenshots you uploaded CLEARLY show custom recovery. You need to flash stock recovery back before you can take any updates.
If you don't know the difference between stock and custom recovery, you aren't ready to update. You need to Read, Read, Read....
This would be a good start: http://mark.cdmaforums.com/MotoX-OTA.html (Thanks @KidJoe for the well-written documentation)
samwathegreat said:
No, it isn't. The screenshots you uploaded CLEARLY show custom recovery. You need to flash stock recovery back before you can take any updates.
If you don't know the difference between stock and custom recovery, you aren't ready to update. You need to Read, Read, Read....
This would be a good start: http://mark.cdmaforums.com/MotoX-OTA.html (Thanks @KidJoe for the well-written documentation)
Click to expand...
Click to collapse
Hi friend..
Yes I did everything.
Here me explaining everything: http://forum.xda-developers.com/and...ns-problem-t2810890/post54034992#post54034992
Liooh said:
Hi friend..
Yes I did everything.
Here me explaining everything: http://forum.xda-developers.com/and...ns-problem-t2810890/post54034992#post54034992
Click to expand...
Click to collapse
I'm trying really hard to explain it to you but you just aren't getting it....
This is what you wrote in the post you linked:
1- Return to STOCK(Mine is 4.4.2) But I did stock it to 4.4.2. OK!
2- Install the TWRP to install the SuperSU. OK, Everything's fine.
3- After it, my dev is already rooted.
OK, look at step number 2: YOU INSTALLED TWRP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
When you flashed TWRP, you REPLACED stock recovery with custom recovery (TWRP).
As I've been trying to make you understand, OTAs will -----ONLY----- install if you have STOCK RECOVERY.
You will need to flash stock recovery BACK (replacing TWRP), THEN you can accept the update!!!!
Afterwards, you can flash TWRP back.
This is well documented everywhere.....you will have to do this EVERYTIME a new OTA comes out.
You can NOT accept an OTA if you have TWRP installed.
Do you understand now?
samwathegreat said:
I'm trying really hard to explain it to you but you just aren't getting it....
This is what you wrote in the post you linked:
1- Return to STOCK(Mine is 4.4.2) But I did stock it to 4.4.2. OK!
2- Install the TWRP to install the SuperSU. OK, Everything's fine.
3- After it, my dev is already rooted.
OK, look at step number 2: YOU INSTALLED TWRP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
When you flashed TWRP, you REPLACED stock recovery with custom recovery (TWRP).
As I've been trying to make you understand, OTAs will -----ONLY----- install if you have STOCK RECOVERY.
You will need to flash stock recovery BACK (replacing TWRP), THEN you can accept the update!!!!
Afterwards, you can flash TWRP back.
This is well documented everywhere.....you will have to do this EVERYTIME a new OTA comes out.
You can NOT accept an OTA if you have TWRP installed.
Do you understand now?
Click to expand...
Click to collapse
But I did STOCK and no updates came up.
Liooh said:
But I did STOCK and no updates came up.
Click to expand...
Click to collapse
I'm convinced that you aren't even reading what I'm writing......
Let me make this easy for you:
Do this:
1. Return to Stock 4.4.2
2. Accept the OTA (DO NOT FLASH TWRP)
3. After you accept the OTA, and you are running 4.4.3, NOW you can install TWRP
YOU CANNOT ACCEPT THE OTA IF TWRP IS INSTALLED!!!!! I've told you this SO many times now.....
TWRP is your problem. You must NOT install TWRP and root (supersu) until AFTER you accept the OTA.
It has ALWAYS been like this. This is nothing new.
Please read my posts carefully. If you follow those instructions, it WILL work.........
samwathegreat said:
I'm convinced that you aren't even reading what I'm writing......
Let me make this easy for you:
Do this:
1. Return to Stock 4.4.2
2. Accept the OTA (DO NOT FLASH TWRP)
3. After you accept the OTA, and you are running 4.4.3, NOW you can install TWRP
YOU CANNOT ACCEPT THE OTA IF TWRP IS INSTALLED!!!!! I've told you this SO many times now.....
TWRP is your problem. You must NOT install TWRP and root (supersu) until AFTER you accept the OTA.
It has ALWAYS been like this. This is nothing new.
Please read my posts carefully. If you follow those instructions, it WILL work.........
Click to expand...
Click to collapse
When I go back to STOCK doesn't the TWRP break ? Because whenever I go back to stock and try to click on "Recovery" Dev stops working. That's what I did man..
1- Back to STOCK perfectly.
2- No Updates comes up. What's this OTA update you're talking about ? where does it pops up ? I'M SURE I DIDN'T RECEIVE ANY right after I stock it... I even checked it in the System Updates...
Liooh said:
When I go back to STOCK doesn't the TWRP break ? Because whenever I go back to stock and try to click on "Recovery" Dev stops working. That's what I did man..
1- Back to STOCK perfectly.
2- No Updates comes up. What's this OTA update you're talking about ? where does it pops up ? I'M SURE I DIDN'T RECEIVE ANY right after I stock it... I even checked it in the System Updates...
Click to expand...
Click to collapse
YES, you do NOT want TWRP (or you can't accept the update).
OTA = "Over the air update" = update to 4.4.3
What method are you using to return to stock? Tell me you aren't just doing a "factory reset". How exactly are you "returning to stock"?
If you install TWRP = updates DISABLED.
samwathegreat said:
YES, you do NOT want TWRP (or you can't accept the update).
OTA = "Over the air update" = update to 4.4.3
What method are you using to return to stock? Tell me you aren't just doing a "factory reset". How exactly are you "returning to stock"?
If you install TWRP = updates DISABLED.
Click to expand...
Click to collapse
I tried many.. RSDLite, Manual flashing and that one that is recommended for people with problems with "boot loop" and the first I tried two days ago that erased all my data, cache, everything..
The thing is, is that every method seems to work fine but I just don't receive the update '-'
Actually I receive that upgrade that is something that pops up for 3 seconds saying "Upgrading android, installing apps." Then my Dev initializes normal but still dealing with the 4.4.2...
Liooh said:
I tried many.. RSDLite, Manual flashing and that one that is recommended for people with problems with "boot loop" and the first I tried two days ago that erased all my data, cache, everything..
The thing is, is that every method seems to work fine but I just don't receive the update '-'
Click to expand...
Click to collapse
Please just try.
1. Return to Stock (just use RSD Lite) YES, this will erase EVERYTHING.
2. Go to settings > About Device > System Update
3. Update to 4.4.3 will install.
4. After 4.4.3 successfully installs, NOW you can flash TWRP (ONLY after you are on 4.4.3)
Please just try it.....
---------- Post added at 08:21 PM ---------- Previous post was at 07:36 PM ----------
Liooh said:
Actually I receive that upgrade that is something that pops up for 3 seconds saying "Upgrading android, installing apps." Then my Dev initializes normal but still dealing with the 4.4.2...
Click to expand...
Click to collapse
That is because you flashed TWRP, as I've been trying to make you understand.....
Is Spanish your native language?
If so, perhaps this page will explain it better than I can:
http://getmovil.com/motorola/instalar-android-4-4-3-moto-x-root/
samwathegreat said:
Please just try.
1. Return to Stock (just use RSD Lite) YES, this will erase EVERYTHING.
2. Go to settings > About Device > System Update
3. Update to 4.4.3 will install.
4. After 4.4.3 successfully installs, NOW you can flash TWRP (ONLY after you are on 4.4.3)
Please just try it.....
Click to expand...
Click to collapse
See now ?