revone help needed (avoiding htcdev) - Sprint HTC One (M7)

fastboot getvar all
version: 0.5
version-bootloader: 1.44.0000
version-baseband: 1.00.20.0626
version-cpld: None
version-microp: None
version-main: 1.31.651.2
version-misc: PVT SHIP S-ON
serialno: FA389S907331
imei: ###############
meid: ###############
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4239mV
partition-layout: Generic
security: on
build-mode: SHIP
Adb log
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ chmod 755 revone
chmod 755 revone
[email protected]:/data/local/tmp $ ./revone -P
./revone -P
revone v0.2.1
Gaining root access (thanks to Dan's motochopper)...Segmentation fault (core dum
ped)
I bought Two phones Friday both m7wls one black one blue. my black one unlocked/s-off fine through revone and was able to put recovery and custom rom with little issues. However when i tried same process with the blue one i get segmentation fault error every time and i have uninstalled/re-installed drivers for phone, never installed htc sync on my pc(windows 7 32 bit), disabled htc sync on phone, tried on clean install of windows(windows 8) after installing all drivers, factory reset phone several times(once from bootloader). I know i could be done in less than 10 if i went through htcdev but for me that's an option i refuse to take, so please help if you can!, within the one parameter (no htcdev)

reserved for logs and solution
reserved for logs and solution if one is found

Look HERE
Nevermind it requires TWRP which means you have to unlock

Prerequisites: unlocked, custom recovery
bigdaddy619 said:
Look HERE
Click to expand...
Click to collapse
"Make sure you have dev unlocked and you flashed a custom recovery"- Second line in post

nazs said:
"Make sure you have dev unlocked and you flashed a custom recovery"- Second line in post
Click to expand...
Click to collapse
Maybe an issue with your ADB shell? I have 'Revoned' twice now, the last time was this morning on my new blue ONE and both times I used terminal on the phone itself. Followed the steps and done. Even went back and did './revone -t' to remove the 'tampered' flag in fastboot. No issues. Try it that way and see what you get.....when you first pull up your term(I use Terminal Emulator), type 'su' (no quotes).......

You must unlock your boot loader. However after running this or even rum runners you can lock it again with a fastboot command and it WILL NOT read "relocked"

Related

OS won't load need help!!! Can't use phone!!!!

I need help getting my HTC One(Sprint) back to its stock version. I unlocked my bootloader, flashed TWRP, and attempted to download ARHD. When I tried to load ARHD from the zip it said I did not have SU permission which I installed. Then I selected to get the permission for root access and then my phone would not load to the OS. I can only go into bootloader or recovery at the moment. I locked the bootloader and tried to run a RUU, but I haven't found any that work with my device. My phone said it is not able to mount data or the sd card when in recovery. It shows no memory at all. I cannot sideload anything even after wiping several times. The phone will constantly boot into recovery and cut off and continue this cycle unless I hold the volume down button when the phone reboots.
Here is some info about the device:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 1.31.651.2
version-misc: PVT SHIP S-ON
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4320mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Update: I can sideload from twrp but the phone will boot the OS and cut off every 2 mins unless I hold the volume down button when rebooting. Also the screen is all black regardless of what rom I sideload. I want to be rooted, but my main concern is to get the phone fully functional again.
Read through this thread. In the future make sure to only flash sprint compatible romshttp://forum.xda-developers.com/showthread.php?t=2377767
Sent from my HTCONE using Tapatalk 4 Beta
OS wont load
I tried to s off but I am having no luck. Is there an ruu for 1.31.651.2 somewhere?
http://forum.xda-developers.com/showthread.php?t=2381202
Try this?
Edit: never mind.
Suave777 said:
I need help getting my HTC One(Sprint) back to its stock version. I unlocked my bootloader, flashed TWRP, and attempted to download ARHD. When I tried to load ARHD from the zip it said I did not have SU permission which I installed. Then I selected to get the permission for root access and then my phone would not load to the OS. I can only go into bootloader or recovery at the moment. I locked the bootloader and tried to run a RUU, but I haven't found any that work with my device. My phone said it is not able to mount data or the sd card when in recovery. It shows no memory at all. I cannot sideload anything even after wiping several times. The phone will constantly boot into recovery and cut off and continue this cycle unless I hold the volume down button when the phone reboots.
Here is some info about the device:
version: 0.5
version-bootloader: 1.44.0000
version-baseband: N/A
version-cpld: None
version-microp: None
version-main: 1.31.651.2
version-misc: PVT SHIP S-ON
product: m7_wls
platform: HBOOT-8064
modelid: PN0720000
cidnum: SPCS_001
battery-status: good
battery-voltage: 4320mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
Update: I can sideload from twrp but the phone will boot the OS and cut off every 2 mins unless I hold the volume down button when rebooting. Also the screen is all black regardless of what rom I sideload. I want to be rooted, but my main concern is to get the phone fully functional again.
Click to expand...
Click to collapse
This is exactly what I had done. I was able to use revone to get s-off and then I used the 1.29 RUU to get back to stock. It took me a little to get revone pushed to my phone, adb only wanted to stay connected as my phone was attempting to boot up, I had to do it quick. ARHD is not compatible with sprint variant.
Sent from my HTCONE using xda app-developers app
I don't understand why so many people are still flashing roms not meant for the Sprint HTC One. Out of every phone I've had this is the most I've ever seen this.
Sent from my HTCONE using Tapatalk 4 Beta
Lancerz said:
I don't understand why so many people are still flashing roms not meant for the Sprint HTC One. Out of every phone I've had this is the most I've ever seen this.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
People just dont read.
Sent from my HTCONE using Tapatalk 4 Beta
S-Off method
tbrad413 said:
This is exactly what I had done. I was able to use revone to get s-off and then I used the 1.29 RUU to get back to stock. It took me a little to get revone pushed to my phone, adb only wanted to stay connected as my phone was attempting to boot up, I had to do it quick. ARHD is not compatible with sprint variant.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
How did you get the S-Off to work exactly? I created the folders on the HTC One b4 it cut off.....data>local>temp>revone . What do I open to type in the commands to recognize revone?
Suave777 said:
How did you get the S-Off to work exactly? I created the folders on the HTC One b4 it cut off.....data>local>temp>revone . What do I open to type in the commands to recognize revone?
Click to expand...
Click to collapse
After you push revone to your phone.
Open an adb shell(by typing "adb shell" in command prompt) and:
* cd /data/local/tmp
* chmod 755 revone
3. (optional) If your device is unlocked and rooted please switch to root using su.
4. Prepare to gain S-OFF by running the command: ./revone -P
4a. If revone reports success reboot the device and proceed to step 5)
4b. If revone reboots the device (we'll pretend this isn't an undiagnosed random crash) please wait 2 minutes then try again from step 2.
4c. If revone reports that you need to reboot and try again please reboot and try again from step 2.
5. Now that revone has successfully prepared your device for S-OFF please open another adb shell (as per step 2) and change to
the /data/local/tmp directory.
6. Instruct revone to grant you S-OFF and unlock status by running the command: ./revone -s 0 -u
6a. Other optional command arguments:-
* -u - Unlock the device
* -l - Lock the device (as if it was never unlocked)
* -r - Relock the device (mark the device as relocked)
* -t - Reset the device's tamper flag.
7. Presuming revone reported success please reboot the device again, this time to the bootloader (adb reboot bootloader)
8. You should now observe your device is S-OFF (and the lock status changed if you invoked that option).
9. (optional) Re-run revone to remove TAMPERED from your HBOOT screen: ./revone -t
Sent from my HTCONE using xda app-developers app
S-Off Method
tbrad413 said:
After you push revone to your phone.
Open an adb shell(by typing "adb shell" in command prompt) and:
* cd /data/local/tmp
* chmod 755 revone
3. (optional) If your device is unlocked and rooted please switch to root using su.
4. Prepare to gain S-OFF by running the command: ./revone -P
4a. If revone reports success reboot the device and proceed to step 5)
4b. If revone reboots the device (we'll pretend this isn't an undiagnosed random crash) please wait 2 minutes then try again from step 2.
4c. If revone reports that you need to reboot and try again please reboot and try again from step 2.
5. Now that revone has successfully prepared your device for S-OFF please open another adb shell (as per step 2) and change to
the /data/local/tmp directory.
6. Instruct revone to grant you S-OFF and unlock status by running the command: ./revone -s 0 -u
6a. Other optional command arguments:-
* -u - Unlock the device
* -l - Lock the device (as if it was never unlocked)
* -r - Relock the device (mark the device as relocked)
* -t - Reset the device's tamper flag.
7. Presuming revone reported success please reboot the device again, this time to the bootloader (adb reboot bootloader)
8. You should now observe your device is S-OFF (and the lock status changed if you invoked that option).
9. (optional) Re-run revone to remove TAMPERED from your HBOOT screen: ./revone -t
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I was almost home free until this happened:
[email protected]:/ # cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp # chmod 755 revone
chmod 755 revone
Unable to chmod revone: No such file or directory
Have you seen this before?
Delete
Sent from my HTCONE using xda premium
Suave777 said:
I was almost home free until this happened:
[email protected]:/ # cd /data/local/tmp
cd /data/local/tmp
r[email protected]:/data/local/tmp # chmod 755 revone
chmod 755 revone
Unable to chmod revone: No such file or directory
Have you seen this before?
Click to expand...
Click to collapse
Did you adb push file to your phone?
Sent from my HTCONE using Tapatalk 4 Beta
Suave777 said:
How did you get the S-Off to work exactly? I created the folders on the HTC One b4 it cut off.....data>local>temp>revone . What do I open to type in the commands to recognize revone?
Click to expand...
Click to collapse
Did you name the folder "temp"? I'm fairly certain the folder actually needs to be titled "tmp". I went through this exact same issue because I need to go back to second grade and learn how to read, but after three days I had to do what tbrad413 did. You have to be quick about creating the folders and naming them accurately.
Suave777 said:
I was almost home free until this happened:
[email protected]:/ # cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp # chmod 755 revone
chmod 755 revone
Unable to chmod revone: No such file or directory
Have you seen this before?
Click to expand...
Click to collapse
Yes it happened to me twice. Your phone doesn't stay recognized by adb for long it seems. I just tried again and did it faster and it worked
Sent from my HTCONE using xda app-developers app
Ok
I was finally able to get it to work! I ran an RUU and the phone is operating again. Now to root and test a Sprint Rom for the HTC One! Thanks again for the help.
Suave777 said:
How did you get the S-Off to work exactly? I created the folders on the HTC One b4 it cut off.....data>local>temp>revone . What do I open to type in the commands to recognize revone?
Click to expand...
Click to collapse
This guide makes S-Off easy.
http://forum.xda-developers.com/showthread.php?t=2319412

[Q] Can't unlock bootloader after relock

So I've converted my HTC One M7 from Sense to GPE and wanted to revert my changes. I flashed a Stock Nandroid backup (which worked fine), relocked my bootloader and made it from S-OFF to S-ON (why did I do this?).
I can receive the 4.3 OTA update directly with my phone, but after the download finishes, it says it finds that I've made some changes to my phone and it won't install the update.
My guess is that my kernel or my HBOOT aren't as stock as they should be.
I'm on 4.2.2
HBOOT-1.44.0000
RADIO-4A.14.3250.13
Firmware 2.24.401.8
Screenshot of my Firmware and so on:
s1.directupload.net/images/131108/yl3xutnf.png
s1.directupload.net/images/131108/a7mshuvo.png
Since I've updated to 4.2.2 I should have HBOOT 1.54, or not? After doing S-ON I can't upgrade my bootloader or flash anything anymore.
Even HTC Dev Unlock fails after getting a new unlock token. (It says success, but my phone won't do anything)
Any ideas?
Flibber said:
HBOOT-1.44.0000
Click to expand...
Click to collapse
If it's truly 1.44 (check in bootloader screen and make sure the date is before June 2013), then use revone to unlock.
EDIT: it may or may not work since you're already on 2.24, but give it a try anyway
nkk71 said:
If it's truly 1.44 (check in bootloader screen and make sure the date is before June 2013), then use revone to unlock.
Click to expand...
Click to collapse
I restarted in bootloader and checked it, it's 1.44 no doubt. I tried revone already many times but get "Segmentation fault (core dumped)".
Edit: I also checked the date. It's May 3rd 2013.
Flibber said:
I restarted in bootloader and checked it, it's 1.44 no doubt. I tried revone already many times but get "Segmentation fault (core dumped)".
Edit: I also checked the date. It's May 3rd 2013.
Click to expand...
Click to collapse
hboot is good, but the ROM is not really good for revone, best to have a 4.1.2 ROM. unless you can get your bootloader unlocked again, you might be stuck.
What's your current setup? post a "fastboot getvar all" (remove IMEI and s/n) and details of your ROM (you said you flashed a nandroid, which one)
nkk71 said:
hboot is good, but the ROM is not really good for revone, best to have a 4.1.2 ROM. unless you can get your bootloader unlocked again, you might be stuck.
What's your current setup? post a "fastboot getvar all" (remove IMEI and s/n) and details of your ROM (you said you flashed a nandroid, which one)
Click to expand...
Click to collapse
Thanks for your answer, here's my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA32xxxxxxx
(bootloader) imei: 3544xxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.068s
If it's really because of 4.2.2, can I just install a 4.1.2 RUU over it with locked bootloader and S-ON?
I hope my getvar helps finding a solution.
Flibber said:
Thanks for your answer, here's my getvar:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.14.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA32xxxxxxx
(bootloader) imei: 3544xxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.068s
If it's really because of 4.2.2, can I just install a 4.1.2 RUU over it with locked bootloader and S-ON?
I hope my getvar helps finding a solution.
Click to expand...
Click to collapse
RUU will work with a locked bootloader, but not with S-On (-> S-On won't allow you to downgrade which is only possible with S-Off)
And you firmware is 2.14.401.2 (posted in the getvar)? Haven't seen that one around. Let me think for a while
But in the meantime, can you try something in adb; after you push revone to the phone and open the adb shell, and change permission, your adb shell command prompt is supposed to start with "$", once you revone -P (gaining root access), does adb come back with "#" instead of "$"
can you do it and copy/paste the whole command prompt here.
nkk71 said:
RUU will work with a locked bootloader, but not with S-On (-> S-On won't allow you to downgrade which is only possible with S-Off)
And you firmware is 2.14.401.2 (posted in the getvar)? Haven't seen that one around. Let me think for a while
But in the meantime, can you try something in adb; after you push revone to the phone and open the adb shell, and change permission, your adb shell command prompt is supposed to start with "$", once you revone -P (gaining root access), does adb come back with "#" instead of "$"
can you do it and copy/paste the whole command prompt here.
Click to expand...
Click to collapse
Thanks a lot for helping me with my problem! That's what I get in my command prompt (I'm working with Windows):
Code:
C:\Users\Kevin\Desktop\One_All-In-One_Kit_v\Data>adb push revone /data/local/tmp
/
3324 KB/s (648208 bytes in 0.190s)
C:\Users\Kevin\Desktop\One_All-In-One_Kit_v\Data>adb shell
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ chmod 755 revone
chmod 755 revone
[email protected]:/data/local/tmp $ ./revone -P
./revone -P
revone v0.2.1
Gaining root access (thanks to Dan's motochopper)...Segmentation fault (core dum
ped)
139|[email protected]:/data/local/tmp $
Flibber said:
Thanks a lot for helping me with my problem! That's what I get in my command prompt (I'm working with Windows):
Code:
C:\Users\Kevin\Desktop\One_All-In-One_Kit_v\Data>adb push revone /data/local/tmp
/
3324 KB/s (648208 bytes in 0.190s)
C:\Users\Kevin\Desktop\One_All-In-One_Kit_v\Data>adb shell
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ chmod 755 revone
chmod 755 revone
[email protected]:/data/local/tmp $ ./revone -P
./revone -P
revone v0.2.1
Gaining root access (thanks to Dan's motochopper)...Segmentation fault (core dum
ped)
139|[email protected]:/data/local/tmp $
Click to expand...
Click to collapse
crap
somehow we need to get you into superuser mode, you wouldn't happen to have superuser installed, or be on custom recovery?
Options:
1- Have you tried typing "su" in the adb shell, we need to get the prompt to say # instead of $
2- exit the adb shell, and "adb reboot recovery" and see if adb shell gives you a # instead of $
nkk71 said:
crap
somehow we need to get you into superuser mode, you wouldn't happen to have superuser installed, or be on custom recovery?
Options:
1- Have you tried typing "su" in the adb shell, we need to get the prompt to say # instead of $
2- exit the adb shell, and "adb reboot recovery" and see if adb shell gives you a # instead of $
Click to expand...
Click to collapse
I don't have su anymore and I just tried it to be sure. I can get into recovery when pressing Volume UP + Power when the Symbol appears after typing "adb reboot recovery". It's Android System recovery 3e.
If I try "apply from ..." it says "invalid operation" and immediately reboots...
Btw: I just noticed that the firmware version from getvar is different from my software version in the settings. (2.14.401.2 in getvar and 2.24.401.2 in software information in settings). I guess that's what he doesn't like about my build when trying to do the OTA...
Flibber said:
I don't have su anymore and I just tried it to be sure. I can get into recovery when pressing Volume UP + Power when the Symbol appears after typing "adb reboot recovery". It's Android System recovery 3e.
If I try "apply from ..." it says "invalid operation" and immediately reboots...
Btw: I just noticed that the firmware version from getvar is different from my software version in the settings. (2.14.401.2 in getvar and 2.24.401.2 in software information in settings). I guess that's what he doesn't like about my build when trying to do the OTA...
Click to expand...
Click to collapse
Hey @Flibber, I've been looking around and
1- can't find anything on firmware 2.14.401.2 where did you get that from
2- your software version is 2.24.401.2, that's usually for M7_U models not M7_UL, also strange
How did you get your phone in that state??
nkk71 said:
Hey @Flibber, I've been looking around and
1- can't find anything on firmware 2.14.401.2 where did you get that from
2- your software version is 2.24.401.2, that's usually for M7_U models not M7_UL, also strange
How did you get your phone in that state??
Click to expand...
Click to collapse
First, I changed my MID and CID for going to GPE. To go back I used a nandroid backup of a DE O2 phone (since my phone is also a german O2 branded one). The problem is, i changed the CID to HTC__102 but forgot to change the MID back... No wonder that it won't accept any updates or OTA zips, since they don't match!
I have no idea since unlocking my bootloader, changing my MID/CID or going S-OFF won't work at all...
Edit: Is there any way to change a OTA firmware zip (to change the android-info.txt MID/CID) without losing the signature? Because when I try to flash a firmware zip from an OTA, it passes the signature verification, but fails after checking MID/CID (of course).
Edit2: I just looked into why I can't use revone and most users say that software and firmware version have to match. So the "only" thing I have to do is update my 2.14.401.2 firmware to 2.24.401.2. Again, an original firmware is needed where my CID/MID match the android-info.txt...
I'd really like to bump this. Is there really no way to rezip and sign firmware packages? Or any other solution available?
Sorry for bumping this again, but I'm really stuck with my lovely HTC One
No way to reset CID/MID? Maybe via support? Or something like a hard reset?

[Q] HTC without s-off and rom

Hi,
I have a problem with my HTC One.
SInce i had phone lock due to lot of tentative on screenlock.
I go to factory reset and decided to load a custom ROM.
Unlock BOOTLOADER, installrecovery and root was easy but i don't be able to s-off because adb don't found my device ao rumrunner don't work
I try on 3 computer with 3 different original htc cables.
I install sdk and htc drivers and fastboot work and adb work in recovery to push files.
Actually i haven't rom inside phone and i try to install stock rom but don't work.
I tried with latest TRWP and CWM
infos :
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 4265mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
fanjo
fanjo33 said:
Hi,
I have a problem with my HTC One.
SInce i had phone lock due to lot of tentative on screenlock.
I go to factory reset and decided to load a custom ROM.
Unlock BOOTLOADER, installrecovery and root was easy but i don't be able to s-off because adb don't found my device ao rumrunner don't work
I try on 3 computer with 3 different original htc cables.
I install sdk and htc drivers and fastboot work and adb work in recovery to push files.
Actually i haven't rom inside phone and i try to install stock rom but don't work.
I tried with latest TRWP and CWM
infos :
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
(bootloader) battery-status: good
(bootloader) battery-voltage: 4265mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
fanjo
Click to expand...
Click to collapse
first hide IMEI and SN from your OP. Refer to nkk71's guide linked in my signature to return stock. To s-off your device with rumrunner you'll need a rom in your phone. So you should try arhd. adb push it to /sdcard/ and flash from latest twrp recovery. then try again to s-off and follow the guide.
Done,
I forgot to do it, thanks
Edit : i've already try to install arhd but i got an error message
Code:
>>>setting permissions
set_metadata_recursive:some changes failed
I'm going to try with your link
Edit 2 : i has read already this guide but it's said that you need to be s-off
i'm going to try, who knows
Edit 3 : i confirm that don't work because i'm not s-off
Remove tampered and locking bootloader don't work despite message that have benn successfully done by guru
fanjo33 said:
Done,
I forgot to do it, thanks
Edit : i've already try to install arhd but i got an error message
Code:
>>>setting permissions
set_metadata_recursive:some changes failed
I'm going to try with your link
Edit 2 : i has read already this guide but it's said that you need to be s-off
i'm going to try, who knows
Edit 3 : i confirm that don't work because i'm not s-off
Remove tampered and locking bootloader don't work despite message that have benn successfully done by guru
Click to expand...
Click to collapse
Yes, you'll need to have a functioning ROM on your phone for http://rumrunner.us/ or http://firewater-soff.com/ to work.
What recovery and version are you using to install which ROM? (please do not say latest!!! give me a version number, all of it, not just 2.6 or something)
HI,
So i try with twrp 2.6.0.1, CWR 6.0.3.4 and 6.0.4.5
Soon to your post i test with twrp 2.6.3.3 for m7 and it work, i install succesfully ARHD 51 rom
Now i'm going to try to s-off again
Thanks a lot :good::good:
Edit : i try again and adb don't work and device isn't find.
I disable fastboot and check usb debugging why is don't working :crying:
fanjo33 said:
HI,
So i try with twrp 2.6.0.1, CWR 6.0.3.4 and 6.0.4.5
Soon to your post i test with twrp 2.6.3.3 for m7 and it work, i install succesfully ARHD 51 rom
Now i'm going to try to s-off again
Thanks a lot :good::good:
Edit : i try again and adb don't work and device isn't find.
I disable fastboot and check usb debugging why is don't working :crying:
Click to expand...
Click to collapse
how about some basic info,
* what OS are you using,
* what kind of USB ports
* and you went from latest "twrp 2.6.0.1" to latest "twrp 2.6.3.3"
* adb devices working?
* adb shell working -> gives you normal prompt ($) or su prompt (#)
* fastboot devices working?
* you are able to adb push but not "i try again and adb don't work and device isn't find" (where? in bootloader, recovery, or ROM)?
* no copy/paste of command prompt or terminal?
the less information you give, the less help you're gonna get
you've already posted a getvar all:
Code:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
but since you still have problems, a little more information may be useful
Hello nkk71 :highfive:
nkk71 said:
how about some basic info,
* what OS are you using,
* what kind of USB ports
Click to expand...
Click to collapse
I tried with seven 64bits on 2 pc, vista 32 bits and xp on my laptop (multiboot) and never my device is find by "adb devices" command
nkk71 said:
* and you went from latest "twrp 2.6.0.1" to latest "twrp 2.6.3.3"
Click to expand...
Click to collapse
No i never say that twrp 2.6.0.1 was the last but intsalled via "HTC One All-In-One Toolkit by Hasoon2000's
nkk71 said:
* adb devices working?
* adb shell working -> gives you normal prompt ($) or su prompt (#)
* fastboot devices working?
Click to expand...
Click to collapse
* adb devices and shell don't work in fastbook, but find recovery when in it an adb find device when OS (ARHD 51) is running.
- adb shell give me that in OS : [email protected]:/ #
- fastboot devices : [Serial] fastboot
nkk71 said:
* you are able to adb push but not "i try again and adb don't work and device isn't find" (where? in bootloader, recovery, or ROM)?
Click to expand...
Click to collapse
It was in recovery, it never worked in bootloader with error:adb device not found
nkk71 said:
* no copy/paste of command prompt or terminal?
the less information you give, the less help you're gonna get
you've already posted a getvar all:
Code:
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__203
but since you still have problems, a little more information may be useful
Click to expand...
Click to collapse
Nothing change since this (just battery voltage )
I copy/pasted it from command prompt
On the terminal there is one more thing : OpenDSP-v32.120.274.0909
fanjo33 said:
I tried with seven 64bits on 2 pc, vista 32 bits and xp on my laptop (multiboot) and never my device is find by "adb devices" command
No i never say that twrp 2.6.0.1 was the last but intsalled via "HTC One All-In-One Toolkit by Hasoon2000's
* adb devices and shell don't work in fastbook, but find recovery when in it an adb find device when OS (ARHD 51) is running.
- adb shell give me that in OS : [email protected]:/ #
- fastboot devices : [Serial] fastboot
It was in recovery, it never worked in bootloader with error:adb device not found
Nothing change since this (just battery voltage )
I copy/pasted it from command prompt
On the terminal there is one more thing : OpenDSP-v32.120.274.0909
Click to expand...
Click to collapse
let's try to make this short & easy, shall we?
What OS you on at the moment? (and adb devices not working correct?
OK
I have seven 64 bits, and my laptop with vitsa 32bits and xp
Adb device not working
fanjo33 said:
OK
I have seven 64 bits, and my laptop with vitsa 32bits and xp
Click to expand...
Click to collapse
Please connect your phone to Win7, then check FAQ #2 in this guide: http://forum.xda-developers.com/showthread.php?t=2541082
the part about device manager
nkk71 said:
Please connect your phone to Win7, then check FAQ #2 in this guide: http://forum.xda-developers.com/showthread.php?t=2541082
the part about device manager
Click to expand...
Click to collapse
I had a message error for MTP installation first time but not after
Under what i have in control panel :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--> I uninstall it and it don't come again
fanjo33 said:
I had a message error for MTP installation first time but not after
Under what i have in control panel :
--> I uninstall it and it don't come again
Click to expand...
Click to collapse
"My HTC" = good, is adb now working?
EDIT: did you uninstall HTC sync manager?
nkk71 said:
"My HTC" = good, is adb now working?
EDIT: did you uninstall HTC sync manager?
Click to expand...
Click to collapse
I have this from the start.
and it doesn't work again
Code:
c:\fastboot>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
fanjo33 said:
I have this from the start.
and it doesn't work again
Code:
c:\fastboot>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
Click to expand...
Click to collapse
are you in booted up ROM (with USB debugging enabled, and Settings -> Power -> Fast boot disabled)?
nkk71 said:
are you in booted up ROM (with USB debugging enabled, and Settings -> Power -> Fast boot disabled)?
Click to expand...
Click to collapse
Yes all the time since i try to s-off,
fanjo33 said:
Yes all the time since i try to s-off,
Click to expand...
Click to collapse
maybe best to try Ubuntu?
nkk71 said:
maybe best to try Ubuntu?
Click to expand...
Click to collapse
I don't know how ubuntu work.
Can we try with live cd ?
fanjo33 said:
I don't know how ubuntu work.
Can we try with live cd ?
Click to expand...
Click to collapse
you can this guide again: http://forum.xda-developers.com/showthread.php?t=2541082
under FAQ #5. (live usb or cd is just fine, no install!!!)
(or check your xda inbox)
nkk71 said:
you can this guide again: http://forum.xda-developers.com/showthread.php?t=2541082
under FAQ #5. (live usb or cd is just fine, no install!!!)
(or check your xda inbox)
Click to expand...
Click to collapse
I'm going to try with live cd first
fanjo33 said:
I'm going to try with live cd first
Click to expand...
Click to collapse
make a Live USB or CD (ubuntu 12.04, 32bit), use terminal to install fastboot + adb as described, then try rumrunner and/or firewater.
Good luck

Updating my Firmware before Flashing Viper ROM 7.0

Hey guys,
Super excited about the new 7.0 release of Viper and ready to get my phone tearing it up again.
I'd like some advice on which firmware to update fully to get things running best as possible before flashing Viper 7.0.
I'm coming from basically stock 6.20, and TWRP 6.2.3.3 atm.
I'll go ahead and drop my fastboot getvar all below.
Should just be a few minutes because I'm backing up atm and then good to go.
Can't wait...
Thanks in advance for the help it's much appreciated - brothers!
You guys are seriously fantastic.
I'd thumbs up each and every one of you fine folks.
-SD
C:\adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34YW905216
(bootloader) imei: **********************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4062mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-152f57d927912d0704cf7272206b5fa2f
getvar:all FAILED (unknown status code)
finished. total time: 0.066s
*PS*
^^^^^
SyntheticDynamics said:
Hey guys,
Super excited about the new 7.0 release of Viper and ready to get my phone tearing it up again.
I'd like some advice on which firmware to update fully to get things running best as possible before flashing Viper 7.0.
I'm coming from basically stock 6.20, and TWRP 6.2.3.3 atm.
-SD
Click to expand...
Click to collapse
IMO, get S-OFF then flash the firmware that the ROM is based on. Based on your low hboot you could probably start with revone S-OFF. This would give you much more flexibility in the future. Don't forget to make a nandroid of your present system and save it off of your phone. Stuff happens!!!
majmoz said:
IMO, get S-OFF then flash the firmware that the ROM is based on. Based on your low hboot you could probably start with revone S-OFF. This would give you much more flexibility in the future. Don't forget to make a nandroid of your present system and save it off of your phone. Stuff happens!!!
Click to expand...
Click to collapse
Alright that's a good place to start...
I was thinking about going S-OFF actually, so this may be right down my alley.
I've already got the nandroid backups saved and I'm copying it off my phone.
Why don't you S-OFF your phone before?
majmoz said:
IMO, get S-OFF then flash the firmware that the ROM is based on. Based on your low hboot you could probably start with revone S-OFF. This would give you much more flexibility in the future. Don't forget to make a nandroid of your present system and save it off of your phone. Stuff happens!!!
Click to expand...
Click to collapse
danielr18 said:
Why don't you S-OFF your phone before?
Click to expand...
Click to collapse
I'm in the process of trying to get it S-OFF'd.
ADB isn't recognizing the device for doing the revone method.
Firewater might be another option.
Also use this thread:
http://forum.xda-developers.com/showthread.php?t=2419699
danielr18 said:
Also use this thread:
http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
Alright, thanks and I'm ready to get this thing up and running soon!
:good:
-SD
SyntheticDynamics said:
I'm in the process of trying to get it S-OFF'd.
ADB isn't recognizing the device for doing the revone method.
Firewater might be another option.
Click to expand...
Click to collapse
Here is the method I used many moons ago. If it works great!
Written instructions:
 Download the Revone file and transfer it to your phone (or download on your phone)
 Use a root file explorer and paste the file inside the /data/local/tmp folder
 Open a terminal emulator and type of the following:
su (enter)
cd /data/local/tmp (enter)
chmod 755 revone (enter) (IF revone doesn’t work, type revone.bin)
./revone -P (enter)
 Reboot
 Open terminal again and type:
su (enter)
cd /data/local/tmp (enter)
./revone -s 0 -u (That would be a ZERO) (enter)
 Reboot
 That’s it! To get rid of the tampered, or relock, follow instructions below
To remove “tampered”
open terminal
cd /data/local/tmp
su
./revone.bin -t
These are other commands that you can fill in above to
-u – Unlock the device
-l – Lock the device (as if it was never unlocked)
-r – Relock the device (mark the device as relocked)
-t – Reset the device’s tamper flag.
SyntheticDynamics said:
I'm in the process of trying to get it S-OFF'd.
ADB isn't recognizing the device for doing the revone method.
Firewater might be another option.
Click to expand...
Click to collapse
Maybe you are using old adb. Here you have the adb & fastboot from last sdk.
Try to check if you have installed the drivers
majmoz said:
Here is the method I used many moons ago. If it works great!
Written instructions:
 Download the Revone file and transfer it to your phone (or download on your phone)
 Use a root file explorer and paste the file inside the /data/local/tmp folder
 Open a terminal emulator and type of the following:
su (enter)
cd /data/local/tmp (enter)
chmod 755 revone (enter) (IF revone doesn’t work, type revone.bin)
./revone -P (enter)
 Reboot
 Open terminal again and type:
su (enter)
cd /data/local/tmp (enter)
./revone -s 0 -u (That would be a ZERO) (enter)
 Reboot
 That’s it! To get rid of the tampered, or relock, follow instructions below
To remove “tampered”
open terminal
cd /data/local/tmp
su
./revone.bin -t
These are other commands that you can fill in above to
-u – Unlock the device
-l – Lock the device (as if it was never unlocked)
-r – Relock the device (mark the device as relocked)
-t – Reset the device’s tamper flag.
Click to expand...
Click to collapse
I have the steps done thus far -
 Download the Revone file and transfer it to your phone (or download on your phone)
 Use a root file explorer and paste the file inside the /data/local/tmp folder
How do I open the Terminal Emulator?
Is that similar to ADB?
SyntheticDynamics said:
I have the steps done thus far -
 Download the Revone file and transfer it to your phone (or download on your phone)
 Use a root file explorer and paste the file inside the /data/local/tmp folder
How do I open the Terminal Emulator?
Is that similar to ADB?
Click to expand...
Click to collapse
The terminal method all takes place on the phone it's self
you download Terminal Emulator from the play store
clsA said:
The terminal method all takes place on the phone it's self
you download Terminal Emulator from the play store
Click to expand...
Click to collapse
Thank you sir!
Just downloaded it.
SyntheticDynamics said:
I have the steps done thus far -
 Download the Revone file and transfer it to your phone (or download on your phone)
 Use a root file explorer and paste the file inside the /data/local/tmp folder
How do I open the Terminal Emulator?
Is that similar to ADB?
Click to expand...
Click to collapse
You can download one from the Play Store. This is the one I used.
I'm in the Terminal Emulator now.
Here is the progress.
Works all the way until I hit....
.revone -P
revone v0.2.1
revone failed (error code = 1)
majmoz said:
You can download one from the Play Store. This is the one I used.
Click to expand...
Click to collapse
It's not letting me push revone.
Getting device not found/recognized...
-SD
SyntheticDynamics said:
I'm in the Terminal Emulator now.
Here is the progress.
Works all the way until I hit....
.revone -P
revone v0.2.1
revone failed (error code = 1)
Click to expand...
Click to collapse
Are you entering .revone -P or ./revone -P? If you cannot get this to work you may have to go to rumrunner or firewater.
majmoz said:
Are you entering .revone -P or ./revone -P? If you cannot get this to work you may have to go to rumrunner or firewater.
Click to expand...
Click to collapse
Yeah I'm entering ./revone -P and getting the following.
revone failed (error code =1)
Can you walk me through rumrunner or firewater?
Thank you,
SD
SyntheticDynamics said:
Yeah I'm entering ./revone -P and getting the following.
revone failed (error code =1)
Can you walk me through rumrunner or firewater?
Thank you,
SD
Click to expand...
Click to collapse
Here are the steps to rumrunner S-OFF.
Here are the steps to firewater S-OFF.

Need help with my m7 (my phone is acting weird)

I flashed ARHD 93 on my M7. Everything was successful. Until I noticed my Virtual SD disappeared. It was their since 20gb was still being occupied, but was showing empty on my computer and the file explorer on my M7 . However I couldn't access it. I was not able to take any pictures, save pictures, or download music. I would get error message saying "unable to save file to sd due to insufficient file permission"
Since than I wiped my SD/internal memory and wiped everything else and than Adb sideload ARHD 93. This made it worse.
Now not only the previous problem still exist. Now I have a black background, My notification bar disappeared. My home button no longer functions. My virtual SD is gone. I can't transfer files over. My Computer gives me an error when I try. I have dont have a lock screen. I keep getting this pop up saying "Unfortunately, System UI has stopped." and my phone is extremely slow. Please help.
I even regret upgrading my rom now. Cause this all started from upgrading from ARHD 92 to 93.
PLEASE HELP, someone!
zainkool said:
I flashed ARHD 93 on my M7. Everything was successful. Until I noticed my Virtual SD disappeared. It was their since 20gb was still being occupied, but was showing empty on my computer and the file explorer on my M7 . However I couldn't access it. I was not able to take any pictures, save pictures, or download music. I would get error message saying "unable to save file to sd due to insufficient file permission"
Since than I wiped my SD/internal memory and wiped everything else and than Adb sideload ARHD 93. This made it worse.
Now not only the previous problem still exist. Now I have a black background, My notification bar disappeared. My home button no longer functions. My virtual SD is gone. I can't transfer files over. My Computer gives me an error when I try. I have dont have a lock screen. I keep getting this pop up saying "Unfortunately, System UI has stopped." and my phone is extremely slow. Please help.
I even regret upgrading my rom now. Cause this all started from upgrading from ARHD 92 to 93.
PLEASE HELP, someone!
Click to expand...
Click to collapse
What is your version-main number? Post the output of "fastboot getvar all" (hide your imei and serialno)
the sdcard access issue can normally be solved with the restorecon command:
Code:
adb shell
su
restorecon -FR /data/media/0
exit
adb reboot
alray said:
What is your version-main number? Post the output of "fastboot getvar all" (hide your imei and serialno)
the sdcard access issue can normally be solved with the restorecon command:
Code:
adb shell
su
restorecon -FR /data/media/0
exit
adb reboot
Click to expand...
Click to collapse
I'm at work at the moment. I'll post it when i get home, since my home computer has adb drivers installed, unless their is another way to get the info your asking?
alray said:
What is your version-main number? Post the output of "fastboot getvar all" (hide your imei and serialno)
the sdcard access issue can normally be solved with the restorecon command:
Code:
adb shell
su
restorecon -FR /data/media/0
exit
adb reboot
Click to expand...
Click to collapse
The fastboot getvar all command isn't working for me. But i can provide this info from the bootloader screen.
I do have have t mobile m7.
M7_UL PVT SHIP S-On RH
HBOOT-1.56.0000
Radio-4A.24.3263.09
OpenDsP-V.32.120.274.0909
OS-
eMMC-boot 2048MB
Does this help or am I missing something?
zainkool said:
I flashed ARHD 93 on my M7. Everything was successful. Until I noticed my Virtual SD disappeared. It was their since 20gb was still being occupied, but was showing empty on my computer and the file explorer on my M7 . However I couldn't access it. I was not able to take any pictures, save pictures, or download music. I would get error message saying "unable to save file to sd due to insufficient file permission"
Since than I wiped my SD/internal memory and wiped everything else and than Adb sideload ARHD 93. This made it worse.
Now not only the previous problem still exist. Now I have a black background, My notification bar disappeared. My home button no longer functions. My virtual SD is gone. I can't transfer files over. My Computer gives me an error when I try. I have dont have a lock screen. I keep getting this pop up saying "Unfortunately, System UI has stopped." and my phone is extremely slow. Please help.
I even regret upgrading my rom now. Cause this all started from upgrading from ARHD 92 to 93.
PLEASE HELP, someone!
Click to expand...
Click to collapse
Maybe try to change file system of data in recovery and return to stock file system. In TWRP : WIPE-Advanced Wipe- check Data- Repair or Change File System- Change File System- for example to EXT2 - at the finish change to EXT4.
zainkool said:
The fastboot getvar all command isn't working for me. But i can provide this info from the bootloader screen.
I do have have t mobile m7.
M7_UL PVT SHIP S-On RH
HBOOT-1.56.0000
Radio-4A.24.3263.09
OpenDsP-V.32.120.274.0909
OS-
eMMC-boot 2048MB
Does this help or am I missing something?
Click to expand...
Click to collapse
Fix your fastboot problem, you will need fastboot connectivity eventually. These info doesn't really help, the only thing I can tell you, based on your hboot version, is that you are running an old firmware on your phone and that could be an issue with arhd 93. Did the restorecon commands worked or not?
alray said:
Fix your fastboot problem, you will need fastboot connectivity eventually. These info doesn't really help, the only thing I can tell you, based on your hboot version, is that you are running an old firmware on your phone and that could be an issue with arhd 93. Did the restorecon commands worked or not?
Click to expand...
Click to collapse
Restore con didnt work. I did get getvar all to work
This is my result.
C:\android-sdk\platform-tools>adb devices
List of devices attached
FA39JW904307 recovery
C:\android-sdk\platform-tools>adb shell
~ # ←[6nsu
/sbin/sh: su: not found
~ # ←[6nrestpr←[←[←[←[J
/sbin/sh: res: not found
~ # ←[6nexit
C:\android-sdk\platform-tools>adb shell
~ # ←[6nsu
/sbin/sh: su: not found
~ # ←[6nrestorecon -FR /data/media/0
unknown option -- F
usage: restorecon [-nrRv] pathname...
~ # ←[6nexit
C:\android-sdk\platform-tools>adb reboot bootloader
C:\android-sdk\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4310mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.094s
alray said:
Fix your fastboot problem, you will need fastboot connectivity eventually. These info doesn't really help, the only thing I can tell you, based on your hboot version, is that you are running an old firmware on your phone and that could be an issue with arhd 93. Did the restorecon commands worked or not?
Click to expand...
Click to collapse
I flashed a new firmware and now my phone is bricked. I cant flash a new recovery or I may be doing it wrong
This is what I flashed. This is what I flashed.
http://forum.xda-developers.com/showthread.php?t=2355814
Quote:
OTA 4.19.531.10 - T-Mobile USA
Quote:
modelid: PN0713000
cidnum: T-MOB010
Download:
tmo_fw_4.19.531.10
Quote:
Whats included:
Quote:
boot.img
Hboot
radio.img (4A.24.3263.09_10.38r.1157.04L)
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_HMX852XD.img
tz.img
zainkool said:
I flashed a new firmware and now my phone is bricked. I cant flash a new recovery or I may be doing it wrong
This is what I flashed. This is what I flashed.
http://forum.xda-developers.com/showthread.php?t=2355814
Quote:
OTA 4.19.531.10 - T-Mobile USA
Quote:
modelid: PN0713000
cidnum: T-MOB010
Download:
tmo_fw_4.19.531.10
Quote:
Whats included:
Quote:
boot.img
Hboot
radio.img (4A.24.3263.09_10.38r.1157.04L)
rcdata.img
recovery.img
rpm.img
sbl1-1.img
sbl1-2.img
sbl1-3.img
sbl2.img
sbl3.img
tp_HMX852XD.img
tz.img
Click to expand...
Click to collapse
I guess you didn't read that big red warning....
IF YOU ARE S-ON LEAVE NOW! This thread is intended for S-Off users that need to return to stock. It is not a general update/upgrade thread. Do not attempt to flash while S-On! Thanks for Understanding.
Click to expand...
Click to collapse
Now try to flash the 6.10.331.9 RUU to unbrick your phone, then take all the ota update until you are running the latest version, unlock bootloader, flash twrp and finally flash arhd.
http://www.htc1guru.com/dld/ruu_m7_..._10-33e-1718-01l_release_387953_signed_2-exe/
alray said:
I guess you didn't read that big red warning....
Now try to flash the 6.10.331.9 RUU to unbrick your phone, then take all the ota update until you are running the latest version, unlock bootloader, flash twrp and finally flash arhd.
http://www.htc1guru.com/dld/ruu_m7_..._10-33e-1718-01l_release_387953_signed_2-exe/
Click to expand...
Click to collapse
I got it to work. After the flash. I unlocked my bootloader, flashed a recovery, and than ARHD 93 Rom. It normal now. I used the official OTA firmware, not the custom one that requires S-off. I also gave you something for your troubles.
What is the lastest firmware out BTW? I had a hard time to find it.
Thanks a lot man. Really appreciate all the help.
zainkool said:
I got it to work. After the flash. I unlocked my bootloader, flashed a recovery, and than ARHD 93 Rom. It normal now.
Thanks a lot man. Really appreciate all the help.
Click to expand...
Click to collapse
I used the official OTA firmware, not the custom one that requires S-off. I also gave you something for your troubles.

Categories

Resources