Volume+ (Speaker Boost) - Galaxy Tab 10.1 Android Development

After long search and many tries i finally found something that boosts our speaker!! I'm posting some alternatives too to make it more like a debate thing!
I've created a thread because i really want everyone to share thoughts on this.
1- Volume + (Simplest)
Stock rom 4.0.4 but i think will work on any rom.
Don't expect clear sound because as it messes with bass so for better audio use headphones or an iPod .
Simply install the attached apk on the thread (no need to change stock audio_effects.conf)
http://forum.xda-developers.com/showthread.php?t=1642379
2- ViPER4Android
http://forum.xda-developers.com/showthread.php?t=2191223
3- Voodoo Sound
https://play.google.com/store/apps/details?id=org.projectvoodoo.controlapp
Not working with stock kernel so use this awsome instead:
http://forum.xda-developers.com/showthread.php?t=1833136
Please Share thoughts and settings

You should give ViPER4Android a try. It gives our tab the extra boost and great sound quality as well. http://forum.xda-developers.com/showthread.php?t=2191223
jpl69 said:
our speakers are really bad so for better audio use headphones .
Click to expand...
Click to collapse
That's not true, our tab actually has a quite decent speaker quality because of the WM8994 chip. Its just Samsung that messed up the volume so you can't feel it.
Sent from my GT-P7500 using Tapatalk HD

Thank you for the response but yes i've tried ViPER4Android, i tried Voodoo also and although it gives a boost of sound when it's in the middle range it doesn't get louder when it's on max volume then the stock.
The clarity of sound is obvious and gives a lot of customization but i really wanted an higher speaker to use when i am on noisy ambients. With Volume+ we get that with simple turn on/off and setting it to 12 it gives us at least 50% of amplified sound not losing much quality.
Perhaps with all that costumization i'm missing something, can you please share your settings?
I'll redraw op.
Thanks

Question about VIPER4Android
eushaun99 said:
You should give ViPER4Android a try. It gives our tab the extra boost and great sound quality as well. http://forum.xda-developers.com/showthread.php?t=2191223
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
What do I chose at ''Please select your CPU''? It has 4 choices

AJtheAndroidNoOb said:
What do I chose at ''Please select your CPU''? It has 4 choices
Click to expand...
Click to collapse
Use the latest fx version. It auto installs the driver.
Sent from my GT-P7500 using Tapatalk HD
---------- Post added at 08:14 PM ---------- Previous post was at 08:13 PM ----------
jpl69 said:
Thank you for the response but yes i've tried ViPER4Android, i tried Voodoo also and although it gives a boost of sound when it's in the middle range it doesn't get louder when it's on max volume then the stock.
The clarity of sound is obvious and gives a lot of customization but i really wanted an higher speaker to use when i am on noisy ambients. With Volume+ we get that with simple turn on/off and setting it to 12 it gives us at least 50% of amplified sound not losing much quality.
Perhaps with all that costumization i'm missing something, can you please share your settings?
I'll redraw op.
Thanks
Click to expand...
Click to collapse
Here's my settings for V4A FX speaker:
1. Master Power: √
2. FIREQUALIZER: ×
3. Convolver : √
i) Impulse Response: Urei 1178 Impulse Hard.irs
ii) Cross Channel: 10%
4. Reverberation: ×
5. Speaker Optimization: ×
6. eXtra-Loud: √
i) Effect Strength: Slight
ii) Max Gain: Inf
iii) Max Output: 0 dB
7. Master Gate (Limiter)
i) Output Gain: 0 dB
ii) Limit Threshold: 0 dB
Sent from my GT-P7500 using Tapatalk HD

eushaun99 said:
Here's my settings for V4A FX speaker:
1. Master Power: √
2. FIREQUALIZER: ×
3. Convolver : √
i) Impulse Response: Urei 1178 Impulse Hard.irs
ii) Cross Channel: 10%
4. Reverberation: ×
5. Speaker Optimization: ×
6. eXtra-Loud: √
i) Effect Strength: Slight
ii) Max Gain: Inf
iii) Max Output: 0 dB
7. Master Gate (Limiter)
i) Output Gain: 0 dB
ii) Limit Threshold: 0 dB
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Do you enable ''Force-Enable''? if you do, does it drain the battery? since it says a warning ''Might cause battery drain on some ROMs''
Out of Topic
Why when I use a secondary music app [Shuttle + Pro] It always say ''Unfortunately, DSP Manager has stop''? Cause the EQ to turn off by itself after a couple of songs?

AJtheAndroidNoOb said:
Do you enable ''Force-Enable''? if you do, does it drain the battery? since it says a warning ''Might cause battery drain on some ROMs''
Out of Topic
Why when I use a secondary music app [Shuttle + Pro] It always say ''Unfortunately, DSP Manager has stop''? Cause the EQ to turn off by itself after a couple of songs?
Click to expand...
Click to collapse
If it works, no need to force enable.
Sent from my GT-P7500 using Tapatalk HD

Works! I feel the quality more if I use the headset than when I use the speaker. What do I do with DSP manager? since it always crashes, is it ok to freeze using Titanium Backup Pro, is there no effect to ViPER4Android if I freeze the DSP manager? sry for the load of questions :laugh:

Freeze-it!! You can always un-freeze-it

Related

[Sound][CM/Stock][Audiophil][App] Alsa Mixer Settings, Hardware EQ and News

This Thread is for people wo need a loud phone ore have big headfone's and need basse and volume.
i love good sound :good:
And wolfson have give US nice multi eq
For all this and more you need at first to flash this Download CWM by pengui77
Now finish
You have 2 diference methods
First 1 method
Download the App Alsa Mixer on the app store
How to set ^^
Speaker :
to make louder you can increase when you tap to speaker and can select between 0-63 stock is 53 but if you make more you will have Gain!! because of the speaker.
and you can set more bass when you scroll down to "AIF1DAC1 EQ2" and set to 10-14 you will have better sound but quieter sound level and faster gain!!
if you will it louder but no gain you must set "AIF1DAC1 EQ2" to 6-0
if you will more height then you must set "AIF1DAC1 EQ4" or "AIF1DAC1 EQ5" higher between 13-16
Method 2.
to make louder type terminal this
Code:
alsa_amixer sset "Speaker" "X"
alsa_amixer sget "Speaker" *to look how it is now
X= between 0-63
Bass or hight
Code:
alsa_amixer sset "AIF1DAC1 EQx" "X"
alsa_amixer sget "AIF1DAC1 EQx" *to lock how it is now
x= 1-5/ 1=low 2=midellow 3=midel 4=midelhight 5=hight
X= 0-31 but i recommend between 9-17
Head fon
Headphone.
1 method (app)
Volume is The first button "headphone" and ther is it like voodoo. stock is -12 or -10 db / number 45
you can set so hight you want i take -2 or -1. but set how much you will (but report bugs please )
Now Multi eq
First you must turn on multi eq under AIF1DAC1 EQ klick and write "on" now you can set equalier
AIF1DAC1 EQ1 =low
AIF1DAC1 EQ2 =midellow
AIF1DAC1 EQ3 =midel
AIF1DAC1 EQ4 =midelhight
AIF1DAC1 EQ5 =hight
then set between 0-31 but i recommend 6-18
2 Me..
terminal : Volume
Code:
alsa_amixer sset "Headphone" "X"
alsa_amixer sget "Headphone" *to look how it is now
X= between 0-63 [45=12db]
Multi EQ
Code:
*first alsa_amixer sset "AIF1DAC1 EQ" "on"
alsa_amixer sset "AIF1DAC1 EQx" "X"
alsa_amixer sget "AIF1DAC1 EQx" *to lock how it is now
Same like
up there
I will update, and be always on the latest state and sey you all.
ther are many spelling mistakes pleas dont be hard to me ^^
1st option for Start in Boot
(Only a fast idea )
1 download script manager
2 download my script
3 chose my script
4 set as root and boot
Finish
Profile 1#
Height speaker volume +less gain
Profile 2#
Stock volume but more bass and better sound
I don't have any problem with the CM10 stock max volume but if these libs give a quality amplification of the speaker's sound, I may give it a try.
This is my solution
This is a good solution But I don't like such a big amp :/ and with my 80 ohm headfone is it with this mod loud and sounds good
Really I have a incredible s and the Optimus 2x sounds much better. Better then my ps3 with HiFi amp
But try this mod with your headfone ^^ and say how loud + bass boost ( set to 14 -15 is enough)
Nice thread m8
I have beats,can you post your init.d script for auto loading settings(i am tired of typing that in console every time )
Also i noticed that it revert's to original values after some time of using phone(no restart) didn't catch when that happends yet...
Yes this is the problem now but to set faster download the app.
I will ask a developer to help me maybe as I now pengui is working by I will sey him about to add eq an maybe eq my profile
(Maybe I will test to make aapp but not many time and skils )
To do is :
Set auto setting at boot
And beats is nothing special its just placebo effect.
Problem we could have with speaker eq and headphon eq :/
Is there a way to increase in-call volume using alsa mixer?
Headamp is the best for volume and sound quality for me. It is little bigger in pocket of course but it sounds amazing! And that's the point.
Where do I buy One?
Forget about it...
That headamp solution is very expensive.
Sent from my LG-P990 using xda app-developers app
I whanted 2 say that i have beats audio inear headphones
With boost of 54 they are 2 load for me,also they have great bass so i don't need more
Just would like that settings stay whole time until you reset
Why u ppl buy this overpriced crap?Ah,marketing,ok.
Now general selection now its right
And yea 54 is quit loud for inear Hp ^^
This mod is for big headpfone over 32 ohme
I'm working on a method to set on boot
I will start a quastion about superqurios bug
dorwoo said:
Why u ppl buy this overpriced crap?Ah,marketing,ok.
Click to expand...
Click to collapse
@ Nootubo,great we need solution until Pengus make manager(service) for auto start and checking if the settings are active couse they revert to original values sometimes(for me)
@ dorwoo If you where adressing me about headphones,i got them from friend(free)(he doesn't need them) i would never pay 100$ for in ear headphones even i love music :good:
Awsome
Great info. Thx for the heads up. I hope it will give us as good sound quality as Voodoo Sound. Have missed that app so much since I switched to ICS/Jelly Bean. I will wait to try this method until its more 'stable' though.
Awesome!
Wow! I'm generally skeptic to sound mods (eg. I hate beats or acid mods), but this is better than supercurio's voodoo mod! Simply amazing!
On CM10 tonyp's PA build 6 & kowalski kernel 100p3. Have tried increase the headphone output from default (I think it's 45) up to 60 and boy, this mod makes my IEM sound loud. Settled on 55 because on 60 I started hearing that crackling noise. Also tried increasing the speaker output from 53 up to 60, and it worked.
Btw, this mod is also compatible with "direct volume control" of poweramp. Great app & mod!
komedol said:
On CM10 tonyp's PA build 6 & kowalski kernel 100p3. Have tried increase the headphone output from default (I think it's 45) up to 60 and boy, this mod makes my IEM sound loud. Settled on 55 because on 60 I started hearing that crackling noise. Also tried increasing the speaker output from 53 up to 60, and it worked.
Btw, this mod is also compatible with "direct volume control" of poweramp. Great app & mod!
Click to expand...
Click to collapse
Unfortunately, it looses all the settings after reboot.
Sent from LG Optimus 2X
It looses for me without reboot,after some time,do you guys that use this mod have same thing?
Put some values and then after some time check settings and you will see they are at default values
Hmm i have no time so i had an fast idea with script manager to set a small script at boot
But no eq for the HP you must set manual and back with the script.
And the bug that the time is shut off is I think still there.
1st site 2 post is the manual off the boot script

Walkman EQ setting

I just spent hours creating new playlists and transferred all music to Z1. I want to squeeze out best possible sound quality. Please share your EQ setting. I just started playing around with it and haven't found the right setting yet.
EQ Settings highly depend on the speakers/ headphones you use, because every setup is balanced differently.
Just play around with it, as far as audio goes there is no right or wrong, as long as you like the sound!
Hi, I'm an audiophile bro. I suggest you to just leave the eq off. Artists have spent so much time in the studio to create the perfect sound that they want you to hear.
It depends on your taste and music genre, I mostly listen to electronic dance music and setting the bass on 6+ makes that kind of music much better imo.
I'm using Poweramp pro but remember to turn off all the Walkman sound effects first as they sort of compile on top of each other making poweramp harder to setup
and leaving everything to default settings is fine if you are in a studio and using their sound equipment - the EQ setting can compensate for a poor set of earphones or if on a hifi system can alter setting to suit equipment and the room accustics - none of us will have a studio soundstage
---------- Post added at 04:32 AM ---------- Previous post was at 04:30 AM ----------
I'm using Poweramp pro but remember to turn off all the Walkman sound effects first as they sort of compile on top of each other making poweramp harder to setup
and leaving everything to default settings is fine if you are in a studio and using their sound equipment - the EQ setting can compensate for a poor set of earphones or if on a hifi system can alter setting to suit equipment and the room accustics - none of us will have a studio soundstage
ClearAudio+ and Dynamic normalize is the best for me.
Sent from my C6902 using xda app-developers app
Power amp pro is boss! Love its EQ and presets. Brings out the best in my dre beats
Sent from my C6903 using Tapatalk 4
After I played around, I ended up with just Clear Bass +10 and VPT to Studio. I'm using Sony XBA-4. My music sound excellent!! I'm super happy with sound quality I get from Z1:good:
- From left to right: +2, -3, -6, 0, +4
- Bass at 10.
- Studio surround
Sent from my Xperia Z1 using xda app-developers app
Walkman EQ hyper beat....
Steps Settings> Sound enhancement > keep the mode on +10 +6 +7 +7 +10
now VPT = Studio
Enjoy the beat of songs....
Simply Clever no need of other music players....
Best EQ setting
Hi Sitti,
Squeezing out the best possible sound quality depends on the headphone you are using. If you have got a normal headphone, you need to play around with the EQ to get the best possible sound output. And, if you are using audiophile gear, you may not need to do any settings at all!
I will give you an example :-
I own a Sony Xperia M Dual. The default headphones which comes along with it are quite decent enough, with a dominant bass line. I am kind of an audiophile, I don't like too much bass. So, I have tweaked the EQ settings in the following way to get the best possible sound out of it :
Clear Bass Level : +7
Equalizer (left to right) - -3 +3 +4 -3 +2
Surround Sound - Studio
Clear Stereo - Off
Dynamic Normaliser - On
And, that's all! Trust me, you will love your music. Let me know.
shabazzkhann said:
Steps Settings> Sound enhancement > keep the mode on +10 +6 +7 +7 +10
now VPT = Studio
Enjoy the beat of songs....
Simply Clever no need of other music players....[/QUOTE
Thank you for your labor
Click to expand...
Click to collapse
That should definitely squeeze out the best possible sound!
Hi,
Please note that EQ settings are heavily dependent on the headphones you are using. Following EQ settings are according to my audio gear that I use. Believe me, they sound amazing! A bit closer to true audiophile gears!
My device : Sony Xperia M Dual
Headphone : Sony MH410C
EQ settings :
Clear Bass level : +10
Equalizer (left to right) : -4, +4, +4, -3, +3.
Settings :
Surround Sound : Studio
Clear Stereo : Off
Dynamic Normalizer : On
Happy Listening!
Another best EQ setting
Phone : Sony Xperia M Dual
Headphone : Sony MDR E818
Equaliser settings :
Clear Bass : +10
EQ (left to right) : 0 +2 +3 -3 +3
Settings :
Surround : Studio
Clear Stereo : Off
Dynamic Normaliser : On
Enjoy your music!
Well if you REALLY want to get the best possible sound out it I suggest getting the AC!D Sound Engine MOD.
Makes everything sound nice and clear with awesome bass. I have it on my Z1s and couldn't be more happy.
WickedWireZ said:
Well if you REALLY want to get the best possible sound out it I suggest getting the AC!D Sound Engine MOD.
Makes everything sound nice and clear with awesome bass. I have it on my Z1s and couldn't be more happy.
Click to expand...
Click to collapse
Where can i find this? Tried doing a search but it comes up for other devices.
jgentry151 said:
Where can i find this? Tried doing a search but it comes up for other devices.
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=2672112
Works Nicely Volume is louder and my bass has more punch, along with the clear audio its just perfect!
If this helps Go ahead and and give me my first Thanks
I use Denon ah-d600 and I listen to metal.. Without any bass...to get enough I put the tru bass to 4.. And when I listen to music with bass in it I turn it down to zero...
Good headphones does not need eq... The equalizer destroys the sound to my ears
Sent from my C6903 using XDA Premium 4 mobile app
deepayan21 said:
Hi Sitti,
Squeezing out the best possible sound quality depends on the headphone you are using. If you have got a normal headphone, you need to play around with the EQ to get the best possible sound output. And, if you are using audiophile gear, you may not need to do any settings at all!
I will give you an example :-
I own a Sony Xperia M Dual. The default headphones which comes along with it are quite decent enough, with a dominant bass line. I am kind of an audiophile, I don't like too much bass. So, I have tweaked the EQ settings in the following way to get the best possible sound out of it :
Clear Bass Level : +7
Equalizer (left to right) - -3 +3 +4 -3 +2
Surround Sound - Studio
Clear Stereo - Off
Dynamic Normaliser - On
And, that's all! Trust me, you will love your music. Let me know.
Click to expand...
Click to collapse
These settings are great.
iSiddharth said:
These settings are great.
Click to expand...
Click to collapse
Thanks for the response.
If you feel male vocals lack warmth and depth, just increase the 400Hz from (-3) to 0., but not more than that, as it will introduce unnecessary hum.
If you feel too much bass, just decrease the Clear Bass level accordingly.
That should do it.
Try out my other equalizer setting here:
http://forum.xda-developers.com/showpost.php?p=54416557&postcount=14
Enjoy your music!

[ROM][ Sense 6][2 May] Rayglobe v1.1 ●► ◄●Rayglobe kitchen●►Custom Install◄●►Themes●►◄●G2&Z2 stuff◄●►Audio Hack◄●►Multi carrier●&#

[ROM][ Sense 6][2 May] Rayglobe v1.1 ●► ◄●Rayglobe kitchen●►Custom Install◄●►Themes●►◄●G2&Z2 stuff◄●►Audio Hack◄●►Multi carrier●&#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
acer73 (aka raimondomartire)
skeleton1911
maurydes
maximo76
Click to expand...
Click to collapse
Rayglobe’s Rom and our team is always open to contributions from everyone. Every single change, suggestion or help is really appreciated.
If you have skills, apk or want only help us or join us please send your application for PM. Our team is made of working guys with real family and childs we reply everyone in right time
• Hybrid HTC base 1.55 & 1.44
• Root, busybox and init.d support
• New Rayglobe Blu Theme
• Audio hack (first boot tune your volume, scale is changed)
• 23 Eqs
• Galaxy s5 TTS voices (download your language from kitchen)
• Build.prop tweaked
• Lg G2 and Sony Z2 stuff
• No ads
• New ringtones
• Ramdisk improvements
• Battery life, performance and memory improvements
• Battery 100% mods also in rechargeable mode
• Sysro / sysrw binaries
• Openvpn / sqlite support
• Disabled logging & removed bloatware
• Advanced power menu with full european language
• Huge system app remove
• Themed horizontal quick settings
• Viper4Android FX
• Smoothest ROM
• Best Battery Management
• Fast fixes / updates
•
• Your warranty is now void.
• I am NOT responsible for bricked devices, dead SD cards, III world’s war, or you getting fired because the alarm app failed. YOU are choosing to make these modifications! Be warning but I’ve tested this rom before publish.
• Support is limited. I do this as a hobby in my free time. All team member have family and childs but we'll do our best to help you if you state your problem in clear English, with as much information as you can (what mods you selected, have you wiped, when exactly does the error occur, what type of phone you have (ul, l , ws etc.), what carrier, logcat and so on. The more information you offer, easier for me to help you. If you do not ask for support in clear English and with no information or with a easy “don’t work” I will ignore your issue!
• NO Requests! When I work on Rayglobe rom I have in mind that I have to satisfy before my eeys and ears and all users to a decent level. What works for me might not work for you and vice versa . I'm not your personal ROM developer and it is not my job nor my intention to make everybody happy.
• Do not come here asking "Hey mate, X rom has that awesome feature and if you don't implement it in your rom, I'll <insert whatever here>!" You flashed this ROM because you liked it at some point. On this section of Xda there are best developers so his common thing find rom with good or incredible stuff. I respect other dev work so if our team can make this mode will be done otherwise no expect kang from us.
• Suggestions for improvements are always welcomed. As long as they are well documented and as long as you understand that NOT everything is possible.
• NO ETAs! While I do my best to constantly work on the ROM to improve, *fix and add new features, again this is a hobby! Our team will work on private beta and usually will publish rom on weekend! If this becomes an obligation passion fades and I might stop cooking the ROM
*Thank Baadnewz for original text
Click to expand...
Click to collapse
Make sure your device is unlocked or have s-off
Download ROM, put it on internal sdcard
Put device in bootloader mode (Power + Volume Down)
Enter Recovery
Find in Recovery "Choose zip from sdcard" choose appropriate zip file. Please read second post that explain aroma
Proceed steps that Aroma installer gives
Reboot device after finishing installation
Brains, common sense, logic and spirit
Welcome in Rayglobe world
• In the spirit of the XDA community we are happy to share our work but always you must ask permission to use anything (WILL GIVE YOU IN 99%).
• You are NOT allowed to use any part of the tweaks files, scripts or app
• If you get the permission when you use the files you MUST post proper link to this thread and mention me ( @acer73)
• Not respecting this simple rules will lead to reporting to XDA Administrators.
Click to expand...
Click to collapse
Everyone who works on the ROM with us
@ LlabTooFeR For permission to use his base (you are always kindle with me:good
My friends @mwilky @ baadnewz (work with them on htc one m7 has enriched me much. I hope in your support also in this voyager)
@ timberwolf671 (when I can I use always his blu & jazz icons, thanks for your friendship)
For this rom credits also:
@acquariusoft for Updateme - our kitchen
@Crackanug for stuning bootanimation, remade by @maximo76 for rayglobe team
@Flar2 for his module
@v-b-n for media audio files
@Jishnu Sur™ for lg g2 stuff
@ Rizal Lovins e @ZeroInfinity (for Xperia stuff)
@ agro1980 for black blu glass (@maximo76 have modified his original file. Embedded by me in recovery)
@revo89 for xposed
@ ViPER520, @zhuhang for ViPER4Android
- EatHeat for omnisnitch
We cook our mods in clear way to make possible other understand or devs verify that we have the right to credit the work of others. Please if we don't write your name consider us in good faith write PM and we update the credits at the speed of light :good:
If you like our work and wants to keep the project alive please push thanks button.
If you want you can consider to buy us also a glass of red wine . I never ask for donations but always appreciate
​
XDA:DevDB Information
[ROM][ Sense 6][2 May] Rayglobe v1.1 ●► ◄●Rayglobe kitchen●►Custom Install◄●►Themes●►◄●G2&Z2 stuff◄●►Audio Hack◄●► OTA Updates and more! `, a ROM for the HTC One (M8)
Contributors
acer73, maurydes, skeleton1911, maximo76
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-04-27
Last Updated 2014-05-02
Reserved
Rayglobe Rom have always 3 possibilities of installation. We'll explain here every possibility
1. Install all rom
If you select this checkbox you want install all rom and format all system partition. Rayglobe rom never format data partition. So:
a) if you have on your device any version of Rayglobe rom not need other wipe
b) if you have other dev Rom please make on your recovery wipe data, cache, dalvik cache
In this state all installation procedure can be estimated in 5 minutes
2. Update theme & Addon
You must use this option if:
- you want only update your previous themes option or stuff installed. System partition will not be touched so in this way you can have fast flash. With this option kernel will not changed!
With this option all installation procedure can be estimated in 1 minutes
3. Update only
You must use this option if:
- you you have rayglobe inside and want reinstall without reselect all aroma choose!. Aroma remember for you your previous choose;
- you have a new ver. of rayglobe and you want install reinstall without reselect all aroma choose. I don't suggest this case just because every ver. of rom can have new aroma option and in this case you don't benefit of this
With this option all installation procedure can be estimated in 4 minutes
Aroma is a great tools, but when you use a lot of configurable options how you find in Rayglobe rom, is normal have errors in installation procedure or stuff not right installed.
For help us to solve you must click 2 times on this button and send us file that you find in directory on sdcard on you put rom zip file
1. HTC installation
One of Rom plus is LEGO installation. You can build (like lego) your phone system choose HTC applications that you want install.
For default we have selected all HTC option to give you except dot cover application. You can add/deselect other if you want
2. ROM MOD
Other PLUS of Rom is Rayglobe mod. If you want real Rayglobe experience don't deselect Rayglobe engine
3. THEMES OR NOT? YOU CAN CHOOSE!
I think that Rayglobe roms have always particular themes so you have 2 options:
1) With first option you choose of leave icons and colors like original HTC M8. In this way your rom will not be compatible with our themes but you can use Rayglobe engine, our mods and stuff
2) Selecting this option you can enter really in Rayglobe world. You can benefit of all team themes
4. Other Aroma stuff that you can selected
We have added a lot of aroma stuff here images of more important choose. Please if you want full root access select supersu option in aroma menu
Reserved
​
Rom have an aroma zip file that permit you changing recovery beetween
- Twrp custom from rayglobeteam
. Twrp stock
- Philz stock
You can change between this recovery with our zip downlodable for rayglobe kitchen or from here:
https://content.wuala.com/contents/raimondomartire/m8OTA/Recovery/Recovery_Rayglobe.zip/?dl=1
This rom don't have huge Pico TTS but we have Samsung Text to speech (TTS) HD voices.
For download right TTS file for your language click on flag (some file are in rayglobe kitchen)
From there head on over to the controls tab and click on Language and Input. Follow that up by going to Text-to-speech options at the bottom of the new window, and then clicking the gear icon next to “Samsung text-to-speech engine.” From here you’ll find a number of settings related to the Samsung TTS engine
Viper4Android is like the “advanced” version of DSP Manager/Beats Audio by providing you with more advanced Surround/Bass/Clarity/Gain boost controls in addition to an equalizer that you can use for your headphones, speakers, bluetooth devices, and more.
We have heavly configured this equalizer with this mod:
1) impulse;
2) profile
For activate this mod you must go in setting and flag this
1. Impulse - Preoladed
In Rayglobe Rom there is preloaded a lot of profiles. We suggest you our Rayglobe impulse
2. Profiles - Preloaded
In Rayglobe Rom there is preloaded 3 profiles
3. Settings Explained
FX Settings Explained
< Headset >
1. Master Power. This option defines whether to enable V4A headset sound effects, also known as main switch.
2. Playback Gain Control. It is mainly used to dynamically control the audio volume, to amplify or to attenuate.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Effect Strength. Effect Strength is the speed of amplification or attenuation, the stronger the faster the speed and the higher the final volume, the weaker the slower the speed, the closer to the original volume. Recommended medium.
(3) Max Gain. When the volume of the note is too small, in order to uplevel the sound, there may be very large magnification. The higher the value, the louder the volume. But too large will also amplify the noise within the song. Recommended 4 times.
(4) Max Output. This value defines the maximum volume of the PlaybackAGC sound in decibel value, the greater the value the greater the volume, 0 db is the maximum. In order to make the sound softer recommended -1.9 dB.
3. FIR Equalizer. 511-order 10 bands FIR linear equalizer.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Preset. Here you can select default equalizer presets. When choosing custom, it will follow the user-defined lines drawn.
(3) Linear Equalizer graphic. Will pop up when you touch the graphic equalizer, you can manually adjust the levels of amplification and attenuation of the 10 bands.
4. Convolver
When an impulse response(IR) sample is loaded, music will show the same characteristics of the loaded sample, for example equalizer, surround, reverberation, tube etc.
Make sure SD Card has /ViPER4Android/Kernel/ folder, IR samples will be located there. If folder not exists, you can download latest V4A FX and extract SDCard_V4A.zip.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Impulse Response. Here you can select and load IR Samples inside /ViPER4Android/Kernel/ folder.
(3) Cross Channel. Brings audio in front of you.
5. Field Surround. It is mainly used to create sound field surround effects. The sound field can be understood as mono field or stereo field.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Field Surround Strength. This value defines the strength of the field surround effects. The stronger, the stereo effect will be more obvious, the sound will come from left and right sides.
(3) Select Mid Image Strength. This value defines the central vocal intensity. More strongman sound more clear, the weaker the more ethereal sound.
6. Differential Surround also known as Haas effect.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Delay Time. This value defines the delay(gap) between left and right. The greater the wider the sound.
7. Headphone Surround +. Virtual Headphone Surround effect.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Effect Level. Strength of VHS+.
7. Reverberation. It uses mathematical methods to simulate the environmental feeling sensation. Example a song can be felt playing inside the auditorium, living room, bathroom, and so on.
(1) Enable checkbox. Whether the effect is enabled.
(2) Room Size. This value defines the virtual environment area size. The larger the value, the sound is wider and more echoes.
(3) Sound Field. This value defines the width of the room above, in meters. Assumed that the above room size is 100 square meters, here to set a width of 14 meters, then the length of the room will be 7.14 m.
Therefore, the room size and width defines the aspect ratio of the virtual environment.
The larger the value, the sound coming from both sides will felt more obvious.
(4) Damping Factor. This value defines the humidity of air in the above virtual environment, the moisture vapor in the air will easily absorb the echoes.
So the bigger this value, the less echoes heard.
(5) Wet Signal. This value defines the volume of the simulated environment effect.
(6) Dry Signal. This value defines the volume of the original sound.
For environments with low air humidity such as living room, auditorium and other indoor environment, you can use room size and sound field to define the area of ​​the virtual environment, water vapor content values ​​from 0 to 20, the reverb signal values ​​20 to 50, the proportion of the original signal to take value of about 50.
For environments with high air humidity such as bathroom and other indoor environment that contains a lot of moisture, you can use room size and sound field to define the area of ​​the virtual environment, water vapor content values ​​of 50 to 100, the reverb signal values ​​40 to 80, the proportion of the original signal value of about 50.
8. Dynamic System. It handles the dynamic range of the sound. In other words the bass, treble, and limiting.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Listening Device. This value defines the headset type connected to the audio jack. If you cannot get the right device for good bass tone, then select Common earphone. Common earphone is a common choice. Recommend Common earphone.
(3) Select Dynamic Bass. This value defines the average dynamic bass, the greater the stronger bass. Recommend 33%.
(4) Tube Simulator(6N1J). This option defines whether to enable tube simulator effect. V4A tube simulator uses a simplified mathematical simulation of tube effect.
If turned on, will greatly reduce high-frequency odd harmonic distortions, while increases even-order harmonic distortions of tube simulator.
9. Fidelity Control. It’s a substitution for XHiFi’s Audio Reconstruction. It handles bass and clarity of the sound.
(1) Enable ViPER Bass checkbox. Whether ViPER Bass is enabled.
(2) Select Bass Mode. Natural, Pure bass+ and Sub-woofer. Natural bass is alike V4A XHiFi’s Lo Contour. Purebass+ gives clean bass. Sub-woofer gives huge bass.
(3) Select Bass Frequency. Adjust bass frequency. Recommended at least 60Hz for both modes.
(4) Select Bass Boost. Volume of ViPER Bass. Recommended at least 6dB for Natural, at least 8dB for Pure bass+
(5) Enable ViPER Clarity checkbox. Whether ViPER Clarity is enabled.
(6) Select Clarity Mode. Natural, Ozone+ and XHiFi offers 3 different types of clarity. Natural has high vocal&treble. Ozone+ offers clean clarity. XHiFi is alike V4A XHiFi’s Hi Clarity.
(7) Select Clarity. Volume of ViPER Clarity. Recommended at least 3.5dB for Natural, at least 8dB for Ozone+, at least Default for XHiFi.
10. Auditory System Protection. Protects auditory system.
(1) Enable checkbox. Whether CureTech+ is enabled.
(2) Select Binaural Level. Strength of Binaural protection. Recommended Moderate.
11. Master Gate(Limiter). This option is V4A output limiter, its used to prevent overloud clipping distortion.
(1) Ouput Gain. This value defines the main output volume. Its something like a volume control.
(2) Channel Pan: This is output gain ratio for left and right channel.
(3) Limit Threshold. This value defines the limits of waveform amplitude by the limiter, 0 dB is the maximum value.
The smaller the value, the easier to experience audio frequency compression(the smaller the volume), will lose sound details, but can effectively control the final output volume. Recommend 0 db.
< Phone Speaker >
1. Master Power. This option defines whether to enable V4A speaker sound effects, also known as main switch
2. FIR Equalizer. Same as headset equalizer.
3. Convolver. Same as headset convolver.
4. Reverberation. Same as headset reverberation
5. Speaker Optimization. Optimise internal speaker audio quality.
(1) Enable checkbox. Whether the effect is enabled.
6. Extra Loud. eXtra-Loud further amplifies the sound, but is controlled to protect the speaker, will not overload.
(1) Enable checkbox. Whether the effect is enabled.
(2) Select Effect Strength. Effect Strength is the speed of amplification or attenuation, the stronger the faster the speed and the higher the final volume, the weaker the slower the speed, the closer to the original volume. Recommended medium.
(3) Max Gain. When the volume of the note is too small, in order to uplevel the sound, there may be very large magnification. The higher the value, the louder the volume. Recommend infinity.
(4) Max Output. This value defines the maximum volume of the EL sound in decibel value, the greater the value the greater the volume, 0 db is the maximum. Recommend 0db.
7. Master Gate(Limiter). Same as headset limiter.
XHiFi Settings Explained
1. Master Power. This option defines whether to enable V4A headset/bluetooth sound effects, also known as main switch.
2. Playback Gain Control. Same as FX version’s PlaybackAGC.
3. FIR Equalizer. 2047-order 10 bands, quality much better than FX version. Method of adjusting same as FX version.
4. Audio Reconstruction. It is XHiFi’s core feature, it does the detailing and treble restoring for lossy mp3 audio files. (Currently in adjustment phase, different device may have different experience.)
(1) Enable checkbox. Whether the effect is enabled.
(2) Hi Clarity. This value defines the detailing and treble restoration percentage, the larger the value, the more details of the sound and stronger treble.
For low-end/common earphones, this is not recommended as you may experience high frequency shrills.
For better earphones such as Monster,Philips,Zombie,Sennheiser, recommended value = 30 ~ 50.
For high-end headphones, value depands on headphone cable length. Start with value = 40, value +10 for every 80cm cable length.
For preamp/amp connect to phone. Start with value = 60, value +10 for every 80cm cable length.
For tube amplifier, directly use value = 100.
(3) Lo Contour. The value defines the percentage of bass contour reconstruction over total band. The larger the value, the stronger the bass, but midrange and details will slightly lost.
For earphones recommend value = 50 ~ 70.
For headphones recommend value = 20 ~ 30.
5. Master Gate(Limiter). This option is V4A output limiter, its used to prevent overloud clipping distortion.
(1) Ouput Gain. This value defines the main output volume. Its something like a volume control.
(2) Limit Threshold. This value defines the limits of waveform amplitude by the limitor, 0 dB is the maximum value.
The smaller the value, the easier to experience audio frequency compression(the smaller the volume), will lose sound details, but can effectively control the final output volume. Recommend 0 db.
APPS​
if you want rayglobe kitchen like normal app in appdrawer
here: http://d-h.st/Ml0
only flash it in recovery and reboot
more will come soon
We want to give our users a rom Fast and stable with so many customizations that will give you the sensation of a new rom everyday
Reserved2
Good to see you in HTC m8 Roms ! I had g2 rayglobe ROM before and it was good !
Отправлено с моего HTC One_M8 через Tapatalk
I have used this rom all day yesterday.I found it on androidfilehost I really like it, has a lot of modifications.The only thing I did not like, this orange beam separation.I suggest you also add a standard font color.On the version I used did not work a change in the sense launcher for lg g2.
raber111 said:
Good to see you in HTC m8 Roms ! I had g2 rayglobe ROM before and it was good !
Отправлено с моего HTC One_M8 через Tapatalk
Click to expand...
Click to collapse
Yes mate same style. I hope in your feedback as soon as I upload all images and download link. I think 30 minutes
sardor said:
I have used this rom all day yesterday.I found it on androidfilehost I really like it, has a lot of modifications.The only thing I did not like, this orange beam separation.I suggest you also add a standard font color.On the version I used did not work a change in the sense launcher for lg g2.
Click to expand...
Click to collapse
Sardor rom that you have download is for italian users this rom is different :good::good: but have always orange beam separation
Oh , was neues, Euch hab ich noch gar nicht gesehen! Schaun mer mal was kommt
Sorry , for Home Language ...
sardor said:
I have used this rom all day yesterday.I found it on androidfilehost I really like it, has a lot of modifications.The only thing I did not like, this orange beam separation.I suggest you also add a standard font color.On the version I used did not work a change in the sense launcher for lg g2.
Click to expand...
Click to collapse
thanks for the feedback friend, of course that the recommendations are welcome se know there 'a lot of work to do:thumbup: more coming in few days
Sent from my unknown using xda app-developers app
Where is the download Button ?
heavymetall66 said:
Where is the download Button ?
Click to expand...
Click to collapse
Give me time
Okay,okay tomorrow is a new day
Gesendet von meinem HTC One_M8 mit Tapatalk
Looking forward to trying this rom out
Sent from my HTC One_M8 using Tapatalk
heavymetall66 said:
Oh , was neues, Euch hab ich noch gar nicht gesehen! Schaun mer mal was kommt
Sorry , for Home Language ...
Click to expand...
Click to collapse
ha wird gut werden. warte mal ab
and now only english
heavymetall66 said:
Okay,okay tomorrow is a new day
Gesendet von meinem HTC One_M8 mit Tapatalk
Click to expand...
Click to collapse
In max 30 minutes from now trust me
The post is under construction?
sardor said:
I have used this rom all day yesterday.I found it on androidfilehost I really like it, has a lot of modifications.The only thing I did not like, this orange beam separation.I suggest you also add a standard font color.On the version I used did not work a change in the sense launcher for lg g2.
Click to expand...
Click to collapse
The Rom you found is the work of @rc420head. It is still in testing and the bugs are being ironed out.
Sent from my HTC One_M8 using XDA Premium 4 mobile app

[MOD][v2.0.0 - 2016 05 09] MixerMod *Stereo Speakers + Audio Adjustments*

*T&C*
When posting in this thread be respectful to all members and abide by XDA rules/guidelines.
Do not re-use any included files/code in another project without prior permission.
I am not responsible for anything that happens as a result of using these files, instructions or commands/code.
Your destiny is your own.
Click to expand...
Click to collapse
MixerMod
Stereo speaker output and hardware level audio tweaks for the Moto G 3rd Gen.
Features
Survival Script
Multiple Editions
Backup / Restore
System-less Support
Customisable Installer
Audio Enhancements
(modified mixer_paths.xml)
Latest updates from CyanogenMod & Motorola
Volume boost for handset (in-call), headphones & tty
Stereo speaker output for media audio, speaker phone, system sounds, alarms, etc
***DISCLAIMER***
By using this mod you take full responsibility for, but not limited to, any damage that may occur to your device, data, ears, or musical taste, etc
You agree not to hold the author liable in anyway.
Do not blame me if; your sound stops, jaw drops, thermonuclear war starts or zombie apocalypse now
Click to expand...
Click to collapse
*Install at your own risk*
Compatibility
Device
Moto-G3 merlin
Moto-G3 osprey
Moto-E2 surnia
may work on other devices with similar hardware
ROM
(Android L 5.1.1 – M 6.0.1)
Stock Moto, CM based, AOSP
should work with any ROM/kernel
Requirements
A Compatible Device
Custom recovery (temporary boot or permanent flash) OR a file-manager with RW /system
(stock recovery has not been tested so pls report any results here)
NOT Required
Root, busybox, manual modifications
**NANDROID NANDROID NANDROID**
It is advised to always have a recent nandroid/twrp backup of /system (minimum) saved locally before making any critical system changes, so please do this before proceeding.
Click to expand...
Click to collapse
Installation
Flash MixerMod-install.zip from recovery
OR
copy/paste mixer_paths.xml to /system/etc and set file permissions to rw-r-r (chmod 644)
(optional) copy/paste 55-mixer.sh to /system/addon.d and set file permissions to rwx-rx-rx (chmod 755)
Reboot
Removal
Flash MixerMod-restore-CM.zip from recovery
(if updating OTA with stock Motorola ROM; flash restore-Moto.zip)
OR
Replace /system/etc/mixer_paths.xml with stock version or rename mixer_paths.xml.bak
(optional) delete /system/addon.d/55-mixer.sh
Reboot
**HINTS**​
Safe Usage​
Lower all android volumes to below 50% (system, in-call & media volume, etc) BEFORE installing for the first time (to ensure vol is not set to high upon initial activation).
Do not use high volume for long periods of time.
Your general listening volume levels should be set between 25%-75%
Only use max volume (75%-100%) for quiet sources as even the main speaker can distort at high volume.
When using your device in landscape: ensure buttons face up so the handset speaker is on your left and the main speaker is on your right (rotating your device will not change left/right output).
To equalise speakers; adjust the L:R balance/pan in your default AudioFX App or favourite media player, if the setting is available make L>R.
If you also have 3rd party sound enhancement/processing mods or libraries installed (EG Viper4android, Dolby, Sony, Beats, etc) then; It is recommended to use a balanced-soft-medium release as the volume increase in the louder releases may be too much and cause distortion &/or impact sound quality.
Click to expand...
Click to collapse
Most Importantly:
Please Enjoy !!
If you wish to use this mod or any of the included files/code for your own ROM build or mod;
Please first PM me a request with your project details and provide clear & appropriate credit when approved.
Testimonials
aSuperSaiyanG0D said:
I installed the boosted variant/edition on my moto g3 (osprey) along side the xtrememusic mod and gotta say..
Bravo man, bravo
...I like how the earpiece is a tad lower than the main speaker...like the HTC 10 sound (top speaker is for treble and bottom is for bass)
Click to expand...
Click to collapse
**WARNING**
The handset speaker on this device is not designed for media-audio playback and is not capable of matching the max volume or quality of the main speaker.
After installing this mod you should not play audio at high volume for long periods of time if you are concerned about damaging your speakers.
Click to expand...
Click to collapse
Downloads
<Android File Host> | <XDA Downloads>
<Changelog & Version Info>
<Addons & Tools>
<Guides>
<FAQ>
​
Credits & Thanks
@hp420 for testing & sharing MotoG3 system-wide volume boost
@chdloc for IIR biQuads discovery, app & info
@osm0sis for ZipScriptSign tool + testkeys and mountSU
@Alberto97 and CyanogenMod for updated system/device files + zip binary file
@lost101 and Motorola for stock system/device files
@Lukest85 (me) for sharing, coding & compiling this mod + discovering & activating stereo speaker output for this device
YOU; the XDA community for rockin' the casbah !!
Apologies if I missed anyone; Pls PM me!
Support
XDA PM or post in thread
Donations
XDA:DevDB Information
MixerMod, Device Specific App for the Moto G 2015
Contributors
Lukest85, Lukest85, Lukest85
Source Code: https://github.com/cyanogenmod/android_device_osprey-cm13/
Version Information
Status: Testing
Current Stable Version: 1.0.0
Stable Release Date: 2016-04-25
Current Beta Version: 2.0.0
Beta Release Date: 2016-05-09
Created 2016-04-25
Last Updated 2016-05-09
*MixerMod Editions*​Overview
From balanced -> loud
The main/right speaker volume increases and the handset/left is constant.
The handset speaker (left) has now been activated at max volume but it is still significantly softer than the main speaker (right) by upto 30dB at default ±0dB
Due to this limitation the only way to achieve L:R balance is to reduce the main speaker volume proportionately.
The balanced edition addresses this issue with ±2dB variance but the softest main spkr (right) & overall volume.
Considering the overall volume reduction of the balanced edition may not be practical or necessary for everyday use;
I have created separate editions with different volume levels within safe min/max range to hopefully suit most use cases and device setups.
The different editions can now be used to achieve the best available L:R balance for your desired overall volume;
If one edition is to loud/unbalanced then try the next edition down in volume
If one edition is to soft then try the next one up in volume
If you want a custom package just ask
Tech Spec
Activated: ±0dB for all outputs and ±0dB master volume (NOT balanced)
Details of other editions below
The following editions apply +10dB to the left spkr volume and ±0dB in-call
Balanced: -20dB to right/main speaker volume
Soft: -10dB to right/main speaker volume
The following editions apply +10dB to the left spkr volume and +2dB in-call
Medium: -4dB to right/main speaker volume
Loud: ±0dB to right/main speaker volume
The following editions apply +12dB to the left spkr volume and +2dB in-call
Boosted: +2dB to right/main speaker volume
All editions (excluding activated) include the following audio tweaks;
Master volume: +2dB
Headphones/tty digital volume: +2dB
Handset/Left speaker output gain: x4
Volume Chart
Code:
[B]v1.0.0 Pure Stereo[/B]
[B]Name - Master Spkr-L Spkr-R HPhones In-Call[/B]
activated - 84 84 84 84 84
balanced - 86 94 64 86 84
soft - 86 94 74 86 84
medium - 86 94 80 86 86
loud - 86 94 84 86 86
boosted - 86 96 86 86 86
[I](86 = +2dB) (default = 84 aka ±0dB)[/I]
Click to expand...
Click to collapse
*Changelog*​
Latest Stable Release
Code:
[B]2016-04-25 v1.0.0[/B]
[I]Initial Release[/I]
Audio:
*Stereo speaker output
*Digital volume optimization for all outputs
*All CM commits: new Low-Latency Recording path + xml fixes
Package:
*Backup/Restore
*Survival Script
*Multiple editions with differing volume levels
Older Releases
Code:
Not yet
Latest Testing Release
Code:
[B]2016-05-10 beta2 v2.0.0[/B]
Package:
*Bug fix for /system SuperSU install
*Additional error/failure notifications
Audio:
*Reduced processing for speakers (vs beta1)
*If IIR filters don't work try temp disabling hotword detection (OK google)
Editions:
*All-In-One
*System (no SU or /systemSU)
*IIR (alpha) Headphone biQuad filters
All other editions have been included in each of the above
Older Releases
Code:
[B]2016-05-09 beta1 v2.0.0[/B]
Audio:
*New routing for speakers (fuller sound, more chance of distortion at high vol)
*Adjusted SRS TruMedia and Analogue Volume for Headphones (may not work with every setup)
*Increased Headphone volume for each edition
*Adjusted L:R speaker balance/volume for each edition
New Editions:
*AIO (beta) All In One
Includes all editions for a personalised setup via mixer.prop file (change SETTINGS with txt editor)
*IIR (alpha) Headphone biQuads
Loud edition with Infinite-Impulse-Responce filters for headphones (qcom h/w level 5-band equalizer)
Default is passthrough (no change)
Package:
*Major overhaul of all scripts & files (inc. shell script instead of updater-script)
*Default install to /su
*Backup/restore to/from anywhere in local storage (int or ext) or not at all
*Utilise 'mixer.prop' config file for a customisable & personalised setup/restore (store anywhere in /sdcard)
*Volume level specs for editions now reside in mixer.prop
*Survival script now optional (via mixer.prop)
*zip size greatly reduced
*Support for addons
*Improve multi-device support
Upcoming Features
subject to change and in no particular order
Include system-less setup without SuperSU (init.d) currently manual process
GUI for installer/restore (AROMA)
Further audio improvements
Stay tuned
Please contact me if you wish to contribute and/or collaborate !
Click to expand...
Click to collapse
*Tools & Addons*​
Native to MixerMod
Due to XDA upload restrictions you will need to remove the last .xyz extension (ie .txt) from the filename of each attachment BEFORE utilising the addon.
Download from attachment or AFH​
Survival Script (addon.d): 55-mixer.sh
Keep MixerMod installed throughout ROM flashes (safe).
included in MixerMod-install.zip and also available separately.
Code:
See OP for install/removal instructions
Linking script (su.d): 55mixer
System-less SuperSU compatibility (/su)
will be integrated with future MixerMod-install.zip
Can be modified for /system/su.d or /system/etc/init.d compatibility
Code:
copy/paste a modified mixer_paths.xml to /su/etc and set file permissions to rw-r-r (chmod 644)
copy/paste linking script to /su/su.d and set file permissions to rwx (chmod 700)
reboot
Tinymix: binary file
Testing mixer_paths.xml changes live & on the fly.
usually already included in each ROM. This version is from the latest stock osprey Moto ROM.
Code:
copy/paste to system/bin
set file permissions to rwx-rx-rx (chmod 755)
Usage: run from terminal as su
Code:
tinymix ‘control’ ‘value’
(integer/number values do not require quotes but all controls DO)
Examples
Set the handset speaker master volume to default ±0dB
Code:
su
tinymix ‘RX1 Digital Volume’ 84
Set the main speaker master volume to default ±0dB
Code:
su
tinymix ‘RX3 Digital Volume’ 84
Query current volume levels (differs per output device ie speakers/headphones/in-call)
Code:
su
tinymix | grep Digital
Funky Beats: Spotify Playlist by @Lukest85
An eclectic mix of favourite tracks, hidden gems and new releases.
Check 'em out or follow along to get your groove on.
My starred playlist, in no particular order.
Shuffle, Press Play and Enjoy !
Free for anyone to listen online (browser or app, no premium account required)
Click to expand...
Click to collapse
Kernels with FauxSound Control
Currently in testing​
Use one of these kernels for additional hardware level audio enhancements & sound control.
Configure volume & gain levels from within your preferred kernel control app (eg Kernel Adiutor) or FauxSound compatible app
Inazuma Kernel by @zeeshanhussain12
AGNi Kernel by @psndna88
Click to expand...
Click to collapse
Recommended Audio Mods
HINTS
These have been tested on this device in conjunction with MixerMod and should not cause any conflicts, though you may need to apply a balanced/soft/medium edition of MixerMod.
​
Remastered System Sounds by @Locklear308
High quality system sounds, remastered in stereo.
More themed and ported system sounds available.
Take full advantage of your stereo speakers !
Evangelion System Sounds by @simonpunk2013
Futuristic system sounds, notifications and alarms.
Many more EVA themed goodies.
Ported from NERV ROM posted by @TakuyaZ
ViPER4Android MK-Mod by @metaspook
Modified version of famous V4A audioFX app by @zhuhang
Software equalizer with many tweaks + new sound drivers/library.
Standalone app.
Viper|Atmos SonyBeats by @guitardedhero
Well renowned AIO audiophile tweaking package with maximum compatibility. The new standard.
Third party sound enhancements, libraries, tweaks & software equalizers
Includes: ViPER4Android, Dolby Atmos, Sony & Beats sound libraries
Click to expand...
Click to collapse
Popular Sound Libraries & Effects
HINTS​
May not be compatible with every setup.
Only install ONE of the following mods at any given time as there may be some conflicts and/or overlap.
If you want a combo setup then search the respective mod's support thread and you should find something posted by @guitardedhero to suit your needs, if it's not already available in the OP.
XTREMEMusic by @androidexpert35
Ultimate compilation of many integrated sound libraries, effects & EQ.
Based on Project Desire, PON-3 & HTK Audio Engine, with many extras
Includes
ViPER4Android
XTREMEMusic AudioFX App
Optimisations for dual speaker devices
Re-sampling of 6144khz 64bit for Headphones and 192khz 24bit for Speakers
Qualcomm Hardware Effects for the onboard Snapdragon Hexagon DSP found in this device
Sound Libraries: HTC Boom Sound, Sony sForce Surround 3D, Sony DSEE-HX, Harmon Kardon, SoundAlive, Beats, SRS, DTS, MegaBass, Vivo Hi-Fi, Dirac, more
eXtremeBeats by @Ben Feutrill
Compilation of handpicked, tweaked & integrated sound libraries of very high quality, in the smallest possible package (2MB)
Includes
Sound Libraries: Sony xLoud, BeatsAudio, SRS, PureAudio Engine, more
No EQ app or apks
Compliments a ViPER4Android standalone install very well.
Project Desire by @PDesire
Compilation of many enhanced, custom made ans integrated sound libraries, with an EQ app.
Based on ReHeaR. Now EOL and open source.
Includes
Project Desire Audio Effects app
Custom Audio Engines: Harmoforia, Harmonia, CryRez/P2SE, Vibeuforium, more
Sound Libraries: SoundAlive, MaxxAudio, Dolby DTS, SRS, Sony, Beats, many more
ReHeaR by @jimRnor
A compilation of many custom and well known sound libraries & effects.
Base for many other sound mods on XDA
Includes
No EQ app
Custom Audio Engines: ZeXshO X, PMEE-HS, Harmoforia, Vibeuforium, Quantum
Sound Libraries: Maxxaudio, SRS, Dolby DTS, BeatBass, HTC Acoustic, Samsung SoundAlive, more
Click to expand...
Click to collapse
Similar Mods
Links for other devices will be added here​
Moto-G 3rd Gen
System-wide volume boost by @hp420
Boost all output volumes for stock-mono configuration.
Multiple editions with varied volume levels.
NOT directly compatible with MixerMod as they modify a common file.
Click to expand...
Click to collapse
*FAQ*​
Q: What does this mod do ?
A: Improves output audio quality by modifying system file/s for the hardware controlled audio configuration.
Checks device compatibility
Installs a modified /system/etc/mixer_paths.xml file for audio routing, output, volume/gain, etc
Preserves existing/stock system file/s as .bak until restored
Installs /system/addon.d survival script to preserve mod files across ROM flash/wipe
Includes the latest updates, fixes & cherrypicks from multiple sources (Vendor/AOSP/CM)
Q: Do Left and Right speakers output stereo or mono sound ?
A: Stereo.
This mod routes the Left audio channel to (only) the upper Handset speaker and the Right audio channel to (only) the Lower Main speaker.
Factory default routes both channels to only the lower main speaker for mono output.
Q: Are you sure the handset speaker is working ?
A: Yes, output is a lot lower than the main speaker due to device limitations.
To test put your finger over the main speaker or adjust L:R balance/pan so R=0 or L>R
Q: Is this mod safe to use ?
A: Yes; provided you do not manually modify the system files yourself (ie to increase the volume further or make other changes).
Q: Will this damage my speakers or ears ?
A: No, Provided you adhere to all warnings/instructions and do NOT modify any relevant system files manually.
Volume/Gain for all outputs are set to a safe level.
Q: Has anyone bricked or broken their device using this mod ?
A: No damage to any device has been reported due to using this mod, nor similar mods for other devices.
HOWEVER it is still recommended to make a Nandroid backup of /system before installing, not to playback audio at high volume for lengthy periods and do not make manual modifications to system files.
Q: I have a compatible device but the mod will not install or flash !
A: Please report details here and provide from build.prop your ro.product.device value and if possible any relevant log files such as /cache/recovery/last_log, logcat, etc,
Q: Is this mod compatible with xyz device ?
A: This mod is currently only compatible with recent Qualcomm Snapdragon based devices that use the onboard soundcard only.
Q: Can I try this mod with a device not listed as compatible?
A: Not recommended unless confident of h/w similarities to confirmed devices. Advise posting a request here with your mixer_paths.xml & device details so I can provide a test package.
Q: I still want to try this on an un-approved device on my own !
A: Test at your own risk but do not be surprised if you can no longer boot or experience audio issues/failure;
Flash a Test Release, as Stable Releases are restricted to approved devices only (see OP) or manually extract & install mixer_paths.xml as per OP.
Q: Should I expect any issues after installing ?
A: No
MixerMod has been confirmed to be error free & stable for all compatible devices listed in OP.
(may work on devices with similar h/w; post your mixer_paths.xml if you wish to test on a new device)
Q: After installing this MixerMod I have errors, problems, questions or requests to report !
A: Post in this thread with your original mixer_paths.xml(.bak)
Include as much relevant detail as practical: Device, ROM, kernel, any & all active sound mods or libraries, + non-stock audio settings/FX, etc
Q: What are your testing variables ?
A: Before any release I first test the new audio settings for a lengthy period of time on a Moto-G3 XT1550 osprey with different settings & variables to ensure no adverse effects:
MM 6.0.x ROMs
Custom kernels
Stock/built-in AudioFX, on vs off
3rf Party AudioFX apps/libraries
eg ViPER4Android, Dolby, Sony, Beats, etc
Multiple MultiMedia apps/players
eg Spotify, Poweramp, SonyMusic, GoogleMusic, Soundcloud, etc
Other sound/audio mods
eg eXtremeMusic, ExtremeBeats, Project Desire, etc
Various Headphones, IEM and external speakers
Built-in speakers with music, video, podcast & audio-test signals
Different environments & ambient noise levels
Volume/Balance measurements tested/recorded with a basic dB soundmeter.
Final field test and selection of each release/edition based on realworld results, compatibility and my personal experience.
Q: What are the Limitations of this mod ?
A: It will not walk your dog, laugh at your jokes or save you from an alien invasion.
I do not currently have access to suitable pro sound equipment so dB measurements for volume & balance are obtained via a basic soundmeter from another handset.
L:R Speaker orientation is locked ie Rotating your device will NOT swap Left/Right channels
Different sized h/w speaker drivers (handset vs main); to compensate for the smaller handset speaker this mod reduces the main speaker volume to achieve better L:R balance.
NB Without reducing the main speaker stereo sound would not be practical as the main speaker is too loud.
No 3rd party soundcard/DAC/DSP to utilise (ie only onboard Qualcom Snapdragon Hexagon processing is available for this device)
Click to expand...
Click to collapse
*Guides*​
General Inquiries
If you want me to make a custom file/mod for your specific setup (I'm happy to), are requesting a change to this mod, testing your own mod, reporting an error, tweaking your setup or just sharing your settings for others, then;
Post here or PM me, and include
Your desired changes
Original un-modified /system/etc/mixer_paths.xml(.bak) file
Details of your sound & device setup IE model, ROM, kernel, mods, etc
Specify any & all active sound mods/libraries + non-stock audio settings
To manually adjust your L:R speaker volume and achieve equal balance; Try A, B or C as follows.
A) via ROM audioFX app, your preferred media player w/pan, or a custom soundFX mod:
Adjust Left:Right output settings so L>R under Balance/Pan according to your preference.
**WARNING**
The following manual steps can be dangerous if a mistake is made and/or volume/gain is set to high/low so only do this if you are confident, have read all the provided info, follow the instructions implicitly and of course;
do so at your own risk, accepting all responsibility if any damage occurs.
B) via a file manager (root + RW /system)
edit/open file /system/etc/mixer_paths.xml in a text editor
Search or scroll for MixerMod under <path name=speaker />
Make your changes to XX for;
<ctl name='RX1 Digital Volume' value=XX />
<ctl name='RX3 Digital Volume' value=XX />
Where;
RX1=Left handset speaker
RX3=Right main speaker
XX sets the volume as a number between 74 and 94 in 1dB increments (stock=0:84 ±0dB)
Play some media and set Android volume <50%
Reboot to apply your changes
Test your changes & repeat the above until you are happy with the volume and balance
If you want to post your new settings please make sure to include any & all sound mods/libraries + non-stock audio settings.
C) Test temporary volume/gain levels live:
Start playing some media
NB I recommend a long playlist with varied but short music/video selections as when media focus shifts your changes will revert.
Run the following code from a terminal
Code:
su
tinymix 'RX1 Digital Volume' XX
tinymix 'RX3 Digital Volume' XX
Speaker: RX1=Left and RX3=Right
Headphones: RX1=Left and RX2=Right
Adjust XX and re-do the above until you are happy with the volume & balance
To save your desired settings edit /system/mixer_paths.xml accordingly (see above) then reboot.
Click to expand...
Click to collapse
Reserved
Reserved
omg, this is super cool! thanks.
---------- Post added at 09:28 AM ---------- Previous post was at 09:07 AM ----------
not really balanced though
HelpMeruth said:
omg, this is super cool! thanks.
Click to expand...
Click to collapse
Cheers ! 'most welcome and glad you like it !
HelpMeruth said:
not really balanced though
Click to expand...
Click to collapse
Which edition/s have you tried?
Do you have any other sound mods or libraries installed?
FYI
*Only the balanced release aims for equal L:R speaker volume as achieving this greatly reduces the main speaker volume.
*The L:R difference on my test device (osprey, stock, no other sound mods) with balanced edition ends up 0-3dB, varying slightly per frequency.
I am hesitant to lower the main speaker much more than it is already for this one but can do if requested.
*Stock/default/flat there is generally approx 30dB difference between the two speakers on this device, which is a lot for this scenario.
So perfect balance may not be practical for many situations.
*Currently L:R balance will even out as you choose a quieter edition of MixerMod (see the OP for more details).
*Volume levels for most releases can be tweaked so feedback is welcome but please provide device/setup info!
edit: Added this info to OP
i had balanced but noticed that the loudspeaker(the earpiece speaker) was a bit louder than the real speaker
HelpMeruth said:
i had balanced but noticed that the loudspeaker(the earpiece speaker) was a bit louder than the real speaker
Click to expand...
Click to collapse
osprey or merlin ?
osprey
HelpMeruth said:
osprey
Click to expand...
Click to collapse
The soft edition from OP will increase the main spkr a few knotches (10dB)
I've attached some alternate editions for you in case you only need a small change;
balanced2 will only reduce the handset spkr by 2dB
balanced3 will only increase the main spkr by 4dB
Alternatively
Run the below command/s in a terminal while audio is playing then let me know your results and I'll post a new edition for you.
(tinymix changes only last for that audio session)
Adjust main/right spkr
Code:
su
tinymix 'RX3 Digital Volume' 68
raise/lower the number until you are happy (OP balanced = 64 and stock = 84)
Adjust the handset/left spkr
Code:
su
tinymix 'RX1 Digital Volume' 92
raise/lower the number until you are happy (most OP editions = 94 which is generally the max without distortion)
Would this be safe to use alongside the xtrememusic mod?
Sent from my Nexus 7 using Tapatalk
I'm wondering how this works with ViPER4android. Would like to try it but not if V4a interferes as I really like it.
sent from my cdma X1548 Virgin Mobile Moto G 2015
Looking forward to trying this out
Will this need re-flashed everytime the official 13.1 Cyanogen nightly gets updated?
thx
aSuperSaiyanG0D said:
Would this be safe to use alongside the xtrememusic mod?
Click to expand...
Click to collapse
Sure is !
Currently MixerMod will not conflict with any other sound mods, though you may need to try different MixerMod Editions to get your desired sound/volume/balance.
Pls report results here for others with same setup.
Hedied4me said:
I'm wondering how this works with ViPER4android. Would like to try it but not if V4a interferes as I really like it.
Click to expand...
Click to collapse
There is a native headphone boost etc included in MixerMod and I can confirm it works very well in combo with V4A !
RE speakers; I would recommend to start with a balanced/soft/medium edition of MixerMod if you also use 3rd party sound libraries eg @guitardedhero 's Viper|Atmos packages, Sony, Beats, etc
bjzapp said:
Looking forward to trying this out
Will this need re-flashed everytime the official 13.1 Cyanogen nightly gets updated?
thx
Click to expand...
Click to collapse
Go for it, just set n forget !
no need to reflash MixerMod after a ROM upgrade addon.d survival script is included.
You should see a few messages from MixerMod in recovery during the process to let you know it's doing its thing...it will even backup the unmodified files from the new ROM before patching so you're never in danger.
Installed the boosted variant along side the xtrememusic mod and gotta say..
Bravo man, bravo ??
And actually I kinda like how the earpiece is a tad lower than the main speaker, kinda how I imagine the HTC 10 would sound (since the top speaker is for treble and bottom is for bass)
And yes I installed it on my moto g3 (osprey)
Disregard my signature ?
Sent from my Nexus 7 using Tapatalk
aSuperSaiyanG0D said:
Installed the boosted variant on my moto g3 (osprey) along side the xtrememusic mod and gotta say..
Bravo man, bravo ??
And actually I kinda like how the earpiece is a tad lower than the main speaker, kinda how I imagine the HTC 10 would sound (since the top speaker is for treble and bottom is for bass)
And yes I installed it on my moto g3 (osprey)
Disregard my signature ?
Click to expand...
Click to collapse
Thank you for the great report and review !! :good:
Excellent comparison too ! that's the limitation of the smaller handset spkr showing through but with lemons we make tasty lemonade :highfive:
Glad your enjoying it !
RE sig; No worries, I've an N7 somewhere as well.
If you don't mind I will add your comments as a quote/review in OP !?
Lukest85 said:
Thank you for the great report and review !! :good:
Excellent comparison too ! that's the limitation of the smaller handset spkr showing through but with lemons we make tasty lemonade :highfive:
Glad your enjoying it !
RE sig; No worries, I've an N7 somewhere as well.
If you don't mind I will add your comments as a quote/review in OP !?
Click to expand...
Click to collapse
Ayee thank you for taking the time to develop this little mod aha ?
And no problem you're more than welcome to ?
Sent from my Nexus 7 using Tapatalk

[Magisk] AOSP dual speaker mod - Enable 24 bit output for PowerAmp on PIE

As i see many people flashing the old oreo stuff from Whiskey on AOSP which result in many bug, i decided to make a module to enable dual speaker mod, pseudo-HIM mode, and Gcam - stereo recording mod on AOSP
Feature:
+ pseudo-HIM mode, should make sound better and DAC toggle work
+ Stereo recording
+ Dual speaker - no mic breaking
+ I still attach the Poweramp 24 bit mod in attached file
Note:
+ Not working with ainur or narsil or any mixer path editing mod
+ Can work together with the Poweramp 24 bit mod attached
+ May have some unknown bug, report if you have any
For old OP:
Hello everyone
After a bit of work, me and @legacyeah manage to bring the great Legacy Audio Mod by @Rizal Lovins, in the form of a Magisk Module for quick installing and removing. We also manged to fix some bug found in the original audio mod.​
Features:
* 24 bit output on poweramp
* enable 384 khz resampling
* Working audio recording in video
*Based on and improve upon Rizal Lovins Legacy Audio Mod on XDA[/COLOR][/COLOR]
Notes: DVC in poweramp is bugged so DVC only work with 192, 96,48,44.1 khz resampling rate. Other resampling rate will need DVC disabled
*IMO sound quality is better compare to stock pie, it feel the same as stock LG sound quality*
Confirmed working on Havoc 0402 + Ainur with no other Audio mod or AML , other rom and compatibility with other audio mod need more tester
How to install:
1. On an AOSP Pie rom
2. Have Magisk working (if you dont know what magisk is and how to install it, search Google)
3. Flash the provided zip through TWRP or Magisk manager (Magisk manager may has bugs causing the zip not flashable)
4. Reboot
5. Enjoy ! (Music player may need further setting for 24 bit output)​
Note 2: If you find any bug, please feel free to report but please remember if you use this mod with other sound mod (like Viper 4 Android, DTS..) the bug will be noted but no promise for it to be fixed
Credit goes to:
@legacyeah for mic recording bug fix
@Rizal Lovins for the original mod
@SGCMarkus for providing AOSP for our device
And all the testers on telegram group
Update:
*18/2/19: add mod option to force enable HIM ( will cause sound distortion on normal headphone- dont complain)
*23/2/19: 24 bit mod HIM is now a separate module, you can install both module and enable one of your choice
*10/3/19: add 24 bit mod Dual speaker mod. Courtesy of @Dante63. Also cleaning up unnecessary file.
*6/4/19: With new device tree, AOSP now have working 24 bit output by default and HIM mode as well as DAC filter and sound preset working (with Ainur), those mod are depreciated. However, PowerAmp still need a mod to enable 24 bit output. Hence thread is updated with the necessary mod
*3/7/19: Add Pseudo HIM mod, dualspeaker mod, stereo recording.
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Ziad Ajam said:
I noticed that when i take any video from my device after installing this that voice is so much low when i play these videos on my device
Click to expand...
Click to collapse
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Thanks man it works well with my v300s stock rom . thumbs up
Mrxyzl said:
Low volume on video recording has been mentioned quite a long time on AOSP Pie. Are you sure it happend after flashing this mod. if so please specify: which rom, which camera app and which sound mod did you use?
Click to expand...
Click to collapse
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
Click to expand...
Click to collapse
Android Pie Lineage OS 16
Ziad Ajam said:
Actually audio recording was off when i use Gcam but was working well in other apps like snapchat and instagram. Now it works in every app but the recording voice is so weak.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Android Pie Lineage OS 16
Click to expand...
Click to collapse
So now all apps are having low volume recording or only the Gcam?
I wonder why this would happen because AOSP had low volume recording issue before.
Sent from my LG-H930DS using Tapatalk
Thread update with normal, high impedance mode and dual speaker mode
Working Very perfect in my LG US998 With pie DotOs and Dolby Digital Plus Mod.
No problems work good
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
mark20120 said:
So the dual speaker version has working mic?
Also, can you make a dual speaker+him version?
Click to expand...
Click to collapse
I don't see why dual speaker don't have a working Mic.
I'll make one this weekend
It Works!
Mrxyzl, thank you very much. Speaker mod works fine. It would be great if you create a stereo mic mod for PIE camera. It's the only thing I miss in custom PIE roms. Thanks again
Stereo mod with HIM would be perfect.
Thread updated according to changes in new device tree. Add 24 bit mod enable for PowerAmp (only for those who use PowerAMP) other player like neutron and UAPP no need this mod
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Klimon5 said:
Mod no longer works after Poweramp v3 build 829 update. Running onHavoc os 2.5 may 20th update for LG V30 H930
Click to expand...
Click to collapse
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Mrxyzl said:
thanks. i'll see what i can do this weekend
Edit: something is wrong on your side. mine work perfectly, btw need to enable DVC in order for 24 bit to work
Click to expand...
Click to collapse
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Klimon5 said:
I fiddled around with some settings. I fixed it. I have been using the 384kHz option with DVC disabled which works but sometimes I end up with the song skipping. I switched it to 192kHz with DVC enabled and that seems to resolve any issues I have. Why are the higher kHz options available if they don't work well or at all? Is it related to the way this mod is set up or how Poweramp is setup?
Click to expand...
Click to collapse
From my experience on stock, 384KHz drops it to 16bit and stops DTS from working.
Sent from my LG-H932 using XDA Labs
Found a way to make GCam record stereo audio
SDevil454000 said:
Found a way to make GCam record stereo audio
Click to expand...
Click to collapse
Much appreciated
Mrxyzl said:
Much appreciated
Click to expand...
Click to collapse
Updated stereo. Sound recording is louder and better quality.

Categories

Resources