[Q] 4.4 OTA update failure - One (M7) Q&A, Help & Troubleshooting

Hi - im a bit of a newb at this so bear with me!
i recently unlocked my bootloader and installed a stock 4.3 JWR66Y.H1 gpe rom and TWRP.
i am now getting the OTA notification but when i try to update it boots in to twrp, flashes the update, reboots and then i end up with a weird green screen. i have restored a backup in twrp back to 4.3, and everytime i try and install the update it does the same thing.
the phone is s-on - i have tried to s-off using rumrunner but it doesnt seem to like the rom and wont work (im on hboot 1.54).
any help would be greatly appreciated in getting the update to flash properly.

blackic3 said:
Hi - im a bit of a newb at this so bear with me!
i recently unlocked my bootloader and installed a stock 4.3 JWR66Y.H1 gpe rom and TWRP.
i am now getting the OTA notification but when i try to update it boots in to twrp, flashes the update, reboots and then i end up with a weird green screen. i have restored a backup in twrp back to 4.3, and everytime i try and install the update it does the same thing.
the phone is s-on - i have tried to s-off using rumrunner but it doesnt seem to like the rom and wont work (im on hboot 1.54).
any help would be greatly appreciated in getting the update to flash properly.
Click to expand...
Click to collapse
Make sure you follow all the instructions for rumrunner. You can't flash any unsigned firmware on s-on. Try manually flashing the update. Download the update and flash in recovery.

Ktan188 said:
Make sure you follow all the instructions for rumrunner. You can't flash any unsigned firmware on s-on. Try manually flashing the update. Download the update and flash in recovery.
Click to expand...
Click to collapse
so to clarify - the ota update is failing because the phone is s-on?
i have flashed the elemental kernel and will try rumrunner again later if thats the case.

4.4 rom
blackic3 said:
so to clarify - the ota update is failing because the phone is s-on?
i have flashed the elemental kernel and will try rumrunner again later if thats the case.
Click to expand...
Click to collapse
Having same issue, is there a ROM that can be loaded instead of going through ota update. I can't get s off to work no matter what I try

You MUST get S-OFF before you get 4.4 OTA, as if things go south, you are in big do-do. Read the last 5-6 pages and you will get an idea.
So do NOT install OTA until you have S-OFF and unlocked bootloader..

soff trouble
SaHiLzZ said:
You MUST get S-OFF before you get 4.4 OTA, as if things go south, you are in big do-do. Read the last 5-6 pages and you will get an idea.
So do NOT install OTA until you have S-OFF and unlocked bootloader..
Click to expand...
Click to collapse
How do I get soff doesn't seem to work no matter what I try

Related

HTC one gpe(converted) boot loop after 4.4

Hey all , minutes ago the 4.4 update was downloaded via OTA on my converted GPE htc one. I pressed install and when it went to recovery i get the error message "set metadata recursive" error , and the device dosnt even boot anymore. Any ideas what might be the problem ?
Izzymane said:
Hey all , minutes ago the 4.4 update was downloaded via OTA on my converted GPE htc one. I pressed install and when it went to recovery i get the error message "set metadata recursive" error , and the device dosnt even boot anymore. Any ideas what might be the problem ?
Click to expand...
Click to collapse
Sounds like you have a custom recovery? If so try stock GE recovery
Sent from my HTC One using Tapatalk
Nah I have the android guy with a red exclamation mark
Wow.. That's a lot of people with same issue.
SaHiLzZ said:
Wow.. That's a lot of people with same issue.
Click to expand...
Click to collapse
I have the exact same problem. I can get into the stock recovery but my device is not recognized in fastboot or adb
I got the same error when attempting to sideload 4.4 on my phone which I had previously converted to 4.3 GPE (rooted) using the instructions in the developer's forum. Guess it's time to do a full reflash.
I guess doing a full reflash is not gonna fix it. I would suggest flashing the stock recovery again and give it another shot.
Izzymane said:
I guess doing a full reflash is not gonna fix it. I would suggest flashing the stock recovery again and give it another shot.
Click to expand...
Click to collapse
are you guys s-on or s-off, newest 4.4 seems to bootloop with S-On devices!!
nkk71 said:
are you guys s-on or s-off, newest 4.4 seems to bootloop with S-On devices!!
Click to expand...
Click to collapse
I'm s-off with rumrunner
Then why not flash the full 4.4 RUU zip from GPE conversion thread?
SaHiLzZ said:
Then why not flash the full 4.4 RUU zip from GPE conversion thread?
Click to expand...
Click to collapse
True but I prefer OTA's , they just make more sense
Izzymane said:
I'm s-off with rumrunner
Click to expand...
Click to collapse
seems like lots of issues with 4.4,
from @makbil:
It seems only s-off, 4.4 compatible recovery and a clean flash are required. If all 3 are not met -> bootloop
Click to expand...
Click to collapse
EDIT: just noticed you're supposed to be 100% stock (converted), so the above quote shouldnt apply to you, i guess, sorry
could someone list the correct things to do to make a clean conversion?
thnaks
I'm also S-off with rumrunner, H-boot 1.54.
Flashed the RUU for 4.4 and all is fine. Luckily I backed up the data I cared about beforehand, just in case.

T Mobile Update To 4.4.2 with S-OFF?

My phone right now is unlocked and with s-off. I was thinking I could relock the bootloader and run RUU to go back to complete stock (with S-OFF). My question is can I install the tmo update with S-OFF? Has anyone done this before? Or do I have to go back to S-ON in order to install the update?
I know that rumrunner does not work with HBOOT 1.56.
Any help would greatly be appreciated, thank you.
b1969 said:
My phone right now is unlocked and with s-off. I was thinking I could relock the bootloader and run RUU to go back to complete stock (with S-OFF). My question is can I install the tmo update with S-OFF? Has anyone done this before? Or do I have to go back to S-ON in order to install the update?
I know that rumrunner does not work with HBOOT 1.56.
Any help would greatly be appreciated, thank you.
Click to expand...
Click to collapse
don't think S-OFF or unlocked matters, just stock rom and recovery required
if i run RUU will that give me stock recovery?
b1969 said:
if i run RUU will that give me stock recovery?
Click to expand...
Click to collapse
If you have a ruu for your currently installed rom, you can extract the recovery from the zip and install.
Otherwise
http://forum.xda-developers.com/showthread.php?t=2545227
Pick the one that matches your current rom version
b1969 said:
My phone right now is unlocked and with s-off. I was thinking I could relock the bootloader and run RUU to go back to complete stock (with S-OFF). My question is can I install the tmo update with S-OFF? Has anyone done this before? Or do I have to go back to S-ON in order to install the update?
I know that rumrunner does not work with HBOOT 1.56.
Any help would greatly be appreciated, thank you.
Click to expand...
Click to collapse
My phone is unlocked/S-OFF. On the previous OTA updates, all I had to do was reflash the stock recovery and the updates proceeded normally, installed just fine. On this new OTA update to 4.4.2, however, that didn't work. I tried relocking the bootloader, flashed the stock recovery... nothing worked (it would get the red slash during the recovery part of the OTA update). Evidently, T-Mobile/HTC are now much more picky about modified devices.
So, to get the OTA to work, I had to run the last RUU from T-Mobile. That, of course, wiped my phone clean, but installed a locked fresh 4.3.1 ROM (still S-OFF). Then the OTA update ran perfectly, resulting in the 4.4.2 OS installed. Then I unlocked it, flashed TWRP recovery and rooted it. It's working beautifully.
Fuzi0719 said:
My phone is unlocked/S-OFF. On the previous OTA updates, all I had to do was reflash the stock recovery and the updates proceeded normally, installed just fine. On this new OTA update to 4.4.2, however, that didn't work. I tried relocking the bootloader, flashed the stock recovery... nothing worked (it would get the red slash during the recovery part of the OTA update). Evidently, T-Mobile/HTC are now much more picky about modified devices.
So, to get the OTA to work, I had to run the last RUU from T-Mobile. That, of course, wiped my phone clean, but installed a locked fresh 4.3.1 ROM (still S-OFF). Then the OTA update ran perfectly, resulting in the 4.4.2 OS installed. Then I unlocked it, flashed TWRP recovery and rooted it. It's working beautifully.
Click to expand...
Click to collapse
Thank you for the information.
Fuzi0719 said:
So, to get the OTA to work, I had to run the last RUU from T-Mobile. That, of course, wiped my phone clean, but installed a locked fresh 4.3.1 ROM (still S-OFF). Then the OTA update ran perfectly, resulting in the 4.4.2 OS installed. Then I unlocked it, flashed TWRP recovery and rooted it. It's working beautifully.
Click to expand...
Click to collapse
4.3.1???
Im only on 4.3 and cant update. Ex:3.24.531.3
no-root, Unlocked and s-off only

[Q] flashing rom s-on

I have an AT&T variant m7 running 4.1.2 and I'm gonna be unlocking, flashing tarp, and rooting. I am looking to install the newest viperone Rom and am wondering if I can do this s-on or not, I've read some stuff that says I have to flash boot.img after and some that says before, and others that say I don't need that step at all! I just wanna get this straightened out so I don't screw up. Any help would be appreciated and if there are any other suggestions I'd be happy to hear them
Thank you.
dirtrider129 said:
I have an AT&T variant m7 running 4.1.2 and I'm gonna be unlocking, flashing tarp, and rooting. I am looking to install the newest viperone Rom and am wondering if I can do this s-on or not, I've read some stuff that says I have to flash boot.img after and some that says before, and others that say I don't need that step at all! I just wanna get this straightened out so I don't screw up. Any help would be appreciated and if there are any other suggestions I'd be happy to hear them
Thank you.
Click to expand...
Click to collapse
Get S-off try revone and rumrunner or firewater (don't skip this step)
after your s-off flash the 3.xx.502.x RUU
now flash TWRP 2.6.3.3 and then the ViperOne rom
clsA said:
Get S-off try revone and rumrunner or firewater (don't skip this step)
after your s-off flash the 3.xx.502.x RUU
now flash TWRP 2.6.3.3 and then the ViperOne rom
Click to expand...
Click to collapse
So after I unlock bootloader, flash twrp, and root, once I get s-off, do I need to re-flash the stock recovery before flashing RUU, then flash twrp again then flash viper? Also why the RUU, I just want to understand what I'm doing and why. Thank you so much for your help, I'm definitely a noob and am really interested in this world.
dirtrider129 said:
So after I unlock bootloader, flash twrp, and root, once I get s-off, do I need to re-flash the stock recovery before flashing RUU, then flash twrp again then flash viper? Also why the RUU, I just want to understand what I'm doing and why. Thank you so much for your help, I'm definitely a noob and am really interested in this world.
Click to expand...
Click to collapse
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Oh ok, now I understand. Thanks
clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Once I flash the RUU zip, will I lose root also?
dirtrider129 said:
Once I flash the RUU zip, will I lose root also?
Click to expand...
Click to collapse
of course you'll have to re-flash recovery and root again
revone failing
clsA said:
of course you'll have to re-flash recovery and root again
Click to expand...
Click to collapse
Ok so I after having a bunch of issues with htcdev site I finally unlocked my bootloader using the kingo program, then I flashed twrp 2633 and rooted although I forgot to erase cache after flashing twrp. At first it didn't boot in recovery, just booted up normally but it worked the second time, after rooting root checker said I didn't have proper root but after rebooting again it says it is rooted. Superuser said I need to update binaries wasn't sure how but I read somewhere to install superSU from playstore. Anyways that's not really my issue, just thought I'd let u know it was goin. When I try running revone, after I run ./revone.bin -P I'm getting revone fail error -6. Coundnt find a strait answer so thought I'd check here. Thanks all and let me know if u need any other info
Dirtrider129
dirtrider129 said:
Ok so I after having a bunch of issues with htcdev site I finally unlocked my bootloader using the kingo program, then I flashed twrp 2633 and rooted although I forgot to erase cache after flashing twrp. At first it didn't boot in recovery, just booted up normally but it worked the second time, after rooting root checker said I didn't have proper root but after rebooting again it says it is rooted. Superuser said I need to update binaries wasn't sure how but I read somewhere to install superSU from playstore. Anyways that's not really my issue, just thought I'd let u know it was goin. When I try running revone, after I run ./revone.bin -P I'm getting revone fail error -6. Coundnt find a strait answer so thought I'd check here. Thanks all and let me know if u need any other info
Dirtrider129
Click to expand...
Click to collapse
I'm not sure why you want to S-off. You have now unlocked, changed recovery, and rooted. You can simply download viper one rom and flash it from recovery. You dont need to flash any boot.img for m7. I hope that helps. If you still want to S-off use rumrunner. revone is not supported for bootloader that comes with 4.1.2. Do note that you cannot s-on again once you s-off the device.
coolshritz said:
I'm not sure why you want to S-off. You have now unlocked, changed recovery, and rooted. You can simply download viper one rom and flash it from recovery. You dont need to flash any boot.img for m7. I hope that helps. If you still want to S-off use rumrunner. revone is not supported for bootloader that comes with 4.1.2. Do note that you cannot s-on again once you s-off the device.
Click to expand...
Click to collapse
I was getting s-off because I was told to get s-off so I could flash the 3.17 ruu to update my hboot/ touchscreen drivers and radio before flashing viper, which I figured so viper would run smoother. I'm a noob just getting into modding. I have a AT&T HTC one running on crickets new gsm network and since I can't get OTAs I first wanted to just get up to 4.4 and sense 6 but then I figured I'd just go custom Rom.
dirtrider129 said:
I was getting s-off because I was told to get s-off so I could flash the 3.17 ruu to update my hboot/ touchscreen drivers and radio before flashing viper, which I figured so viper would run smoother. I'm a noob just getting into modding. I have a AT&T HTC one running on crickets new gsm network and since I can't get OTAs I first wanted to just get up to 4.4 and sense 6 but then I figured I'd just go custom Rom.
Click to expand...
Click to collapse
It is not mandatory to S-Off to flash a rom. Your rom will anyway work in a good way.
clsA said:
skip the stock recovery step .. after your s-off you can flash the RUU even unlocked... your flashing the RUU to get your hboot / touch screen drivers and radio more up to date.
Click to expand...
Click to collapse
Well after failing with revone, rumrunner, and firewater I went ahead and flashed viper, and everything was fine. I can't help be bugged by the fact that you told me to get s-off and flash that ruu to get the updated radio and touchscreen drivers, I read that I need a 4.2 Rom to get revone to work so I am gonna give it another try. I tried running firewater with ARHD and it said that it had an anti-firewater patch. So I am just curious as to what the importance of having the updated hboot, radio, and touchscreen drivers. I just feel like I should still get it done since u told me not to skip that step, not to mention later on down the line when I get more familiar with all of this dev and modding stuff I might want to do other things that require a-off. Thanks for all your help and info . Before I continue with it I made a backup of viper with the setting and themes I've set up, after I get s-off and flash the ruu, should I 're-flash the Rom or can I restore my backup with out changing any of the updated software, I didn't think the Rom would have anything to do with it but I just wanna make sure. Thanks
dirtrider129 said:
Well after failing with revone, rumrunner, and firewater I went ahead and flashed viper, and everything was fine. I can't help be bugged by the fact that you told me to get s-off and flash that ruu to get the updated radio and touchscreen drivers, I read that I need a 4.2 Rom to get revone to work so I am gonna give it another try. I tried running firewater with ARHD and it said that it had an anti-firewater patch. So I am just curious as to what the importance of having the updated hboot, radio, and touchscreen drivers. I just feel like I should still get it done since u told me not to skip that step, not to mention later on down the line when I get more familiar with all of this dev and modding stuff I might want to do other things that require a-off. Thanks for all your help and info . Before I continue with it I made a backup of viper with the setting and themes I've set up, after I get s-off and flash the ruu, should I 're-flash the Rom or can I restore my backup with out changing any of the updated software, I didn't think the Rom would have anything to do with it but I just wanna make sure. Thanks
Click to expand...
Click to collapse
you can restore your backup with the new firmware
for firewater you needed ARHD + ElementalX kernel
it mark just fine with the ViperOne rom also
Revone only works on hboot 1.44 and android 4.1.2 and/or 4.2.2
clsA said:
you can restore your backup with the new firmware
for firewater you needed ARHD + ElementalX kernel
it mark just fine with the ViperOne rom also
Revone only works on hboot 1.44 and android 4.1.2 and/or 4.2.2
Click to expand...
Click to collapse
Do you think firewater will work with viper+Elemental X kernel? If I used the same guide as with ARHD. I tried to s-off with revone by flashing a 4.2.2 viper Rom but I lost all signal and service, so I restored my backup. Also I was wondering since I'm running the 3.17 ruu to update radio and stuff , should I use the 4.18 ruu since its newer? Thanks again for all the help.
UPDATE: Well ran firewater since coudnt get revone to work , took all of like 45 seconds and it said device is s-off. Couldn't believe it after all the trouble I've had.Awesome!

[Q]Back to Stock-Problem

Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!
umbertoftw said:
Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!
Click to expand...
Click to collapse
Try to s-off with Rumrunner
after your s-off it's easy to update your firmware and flash ViperOne rom
Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.
umbertoftw said:
Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.
Click to expand...
Click to collapse
Yes use the Universal > http://rumrunner.us/rumrunner_downloads/rumrunner_HTC_0.5.0.zip
Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.
umbertoftw said:
Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.
Click to expand...
Click to collapse
stock rom plus ElementalX is a good combo
okay, I reinstalled ElementalX (in the right version) as stockish as possible, and after many many reboots, and a few prayers and cries it did WORK!!
Thank you very much
What is the next step, because I don't have any stock recovery for my firmware? or a stock kernel..
EDIT: I was searching for RUU to flash, but the weird thing is, that my CID is O2 germany, and my firmware is O2 UK. What should I flash? There is no exact RUU for my CID, or I did not find it..
I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?
umbertoftw said:
I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?
Click to expand...
Click to collapse
You now have s-off you can convert your phone to international
you need this
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
use modelid: PN0710000
and simply change your CID to HTC__001
fastboot oem writecid HTC__001
then use this RUU
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
or here
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
you should get OTA, then go back to unlocking your bootloader and Rooting as usual

soft brick every time i update stock rom

HTC ONE (M7) Sprint
hboot 1.57
s-on
unlocked
recently used guru reset to go back to stock rom, worked fine until I tried to update the phone and get stuck on boot screen. loaded up twrp again and sideloaded another guru reset... did the same thing, worked until i did an update and gets stuck at boot screen when update is complete.
What kind of update are you talking about?
Sent from my HTC One using Tapatalk
ota android update
OTAs don't work with TWRP.. But I'm really not sure what is going on with your phone. Maybe just flash a ROM that's already up to date?
Sent from my HTC One using Tapatalk
guru reset installs stock rom and recovery. used the latest one available. right now i'm just going to try to get s-off and run a ruu.
Just tried again one more time to see... it seems to take the first update just fine, and only bricks on update 4.06.651.9
Mud3 said:
Just tried again one more time to see... it seems to take the first update just fine, and only bricks on update 4.06.651.9
Click to expand...
Click to collapse
What is your fastboot getvar all (minus serial no and imei)
What guru reset have you been using?
Did you ever fix this, I am having the same problem.
bigpedro36 said:
Did you ever fix this, I am having the same problem.
Click to expand...
Click to collapse
The reason it fails is because the guru reset is too old, it doesn't contain major system files, only radio and recovery plus the Rom zip file, therefore your hboot remains on the latest, probably 1.57, now when the ota comes and tries to update your hboot to 1.56 from the old Rom files that the reset put on there, it fails because you can't back flash an s-on device, s-off is the only answer unless you can find a newer reset Rom.
My HBoot is actually 1.6.. and im having trouble finding anything that will make 1.6 into s-off .
bigpedro36 said:
My HBoot is actually 1.6.. and im having trouble finding anything that will make 1.6 into s-off .
Click to expand...
Click to collapse
Have you tried sunshine s-off ? Not sure if it supports 1.6 yet though but it's worth a try, you only pay if it can s-off your phone after its run some tests. But that's my point, your on the latest hboot and the ota files are assuming you on something like 1.54 (estimate) and trying to update it, fails because you already have a newer hboot.
Seanie280672 said:
Have you tried sunshine s-off ? Not sure if it supports 1.6 yet though but it's worth a try, you only pay if it can s-off your phone after its run some tests. But that's my point, your on the latest hboot and the ota files are assuming you on something like 1.54 (estimate) and trying to update it, fails because you already have a newer hboot.
Click to expand...
Click to collapse
Cool I got S-off now. I'm trying to OTA again and will go from there.
bigpedro36 said:
Cool I got S-off now. I'm trying to OTA again and will go from there.
Click to expand...
Click to collapse
Not sure if the ota will work, you may have to just grab a full Sprint ruu and just run that which will back flash everything.
Seanie280672 said:
Not sure if the ota will work, you may have to just grab a full Sprint ruu and just run that which will back flash everything.
Click to expand...
Click to collapse
The OTA worked.. Thanks a ton.. you explained exactly what the problem was.

Categories

Resources