[Q] Account flashtool - Xperia Z Q&A, Help & Troubleshooting

Hello,
I have xperia Z that I broke the battery connector and now it won't turn on, i'm really not bothered about the phone the thing that concerns me is the fact that my google account is still signed in, well I flashed it with flashtool to stock rom will that have remove the account from the phone? I also changed the password on my google account.
Pleassse help

If you wipe, yes.
Gesendet von meinem C6603 mit Tapatalk

Dont worry.. just flash the stock firmware.. make sure u checked all the wipe options from flashtool...

Thank you,
I flashed with flashtool several times lol and did a factory reset sony software update service to lol the only thing is when I flashed with flashtool I flashed to 434 version then when I reconnected to flash again it said device connected is 10.3.1.a.2.67 which is should be .434 or something is it just because the phone won't turn on will it still of reset and removed the google account?

mattyxkrist said:
Thank you,
I flashed with flashtool several times lol and did a factory reset sony software update service to lol the only thing is when I flashed with flashtool I flashed to 434 version then when I reconnected to flash again it said device connected is 10.3.1.a.2.67 which is should be .434 or something is it just because the phone won't turn on will it still of reset and removed the google account?
Click to expand...
Click to collapse
U dont have 2.67 ftf with u.?

Rajeev said:
U dont have 2.67 ftf with u.?
Click to expand...
Click to collapse
nono thats what firmware the phone was, then I flashed 434 firmware and flashed again and again and everytime it still said connected device is 2.67 I think it says that because the phone hasn't been turned on since then

mattyxkrist said:
nono thats what firmware the phone was, then I flashed 434 firmware and flashed again and again and everytime it still said connected device is 2.67 I think it says that because the phone hasn't been turned on since then
Click to expand...
Click to collapse
2.67 is the latest firmware. Then y u flashing 434 firmware bro. ? Little confused i am

if you click wipe button before flashing new frm, it will erase everything on your phone

Rajeev said:
2.67 is the latest firmware. Then y u flashing 434 firmware bro. ? Little confused i am
Click to expand...
Click to collapse
haha sorry it's me with ocd, just wanted to make sure it is wiped because whatever firmware I flash it still comes up as 2.67 on flashtool

eccomania said:
if you click wipe button before flashing new frm, it will erase everything on your phone
Click to expand...
Click to collapse
thank you, will it of wiped even if the phone wont turn on after flashing?

Will it of wiped even if the phone won't turn on, because it seems like the reset only activates when the phone turns on lol (I hope not ) lol or will it wipe even when the phone is turned off that the thing I wanted to know

sorry I don't seem to be making myself clear lol, the thing I want to know is that I flashed the phone several times with flashtool the thing I want to know is if the phone gets wiped as soon as flashtool finishes or do you have to turn the phone on to activate the reset or is that silly?

mattyxkrist said:
sorry I don't seem to be making myself clear lol, the thing I want to know is that I flashed the phone several times with flashtool the thing I want to know is if the phone gets wiped as soon as flashtool finishes or do you have to turn the phone on to activate the reset or is that silly?
Click to expand...
Click to collapse
My question? y don't u turn on the phone after flashing ? Any problems???
And yes ur phone will fully wiped after the flash complete. no need to turn on d phone..

Rajeev said:
My question? y don't u turn on the phone after flashing ? Any problems???
And yes ur phone will fully wiped after the flash complete. no need to turn on d phone..
Click to expand...
Click to collapse
Thank you soo much and I can't turn the phone on because the battery connector on the circuit board has snapped off haha

mattyxkrist said:
Thank you soo much and I can't turn the phone on because the battery connector on the circuit board has snapped off haha
Click to expand...
Click to collapse
Ohhh ok ok.. Then flash the latest Firmware.. Then giv to Service Center... Locked Bootloader.. Right?

Rajeev said:
Ohhh ok ok.. Then flash the latest Firmware.. Then giv to Service Center... Locked Bootloader.. Right?
Click to expand...
Click to collapse
Well it's my fault anyway haha, am not bothered about the phone anyway I have a new one which I will never take apart! ^_^

mattyxkrist said:
Well it's my fault anyway haha, am not bothered about the phone anyway I have a new one which I will never take apart! ^_^
Click to expand...
Click to collapse
Thats cool

well thanks for all ya help it's done now haha I have flashed the phone loads of times with flashtool and also reset it with sony update service to just wanted confirmation which you helped me alot haha thank you

Google allows you to revoke device access selectively, you don't need to change password AFAIK it's base for derriving access key,password itself it isn't stored on device. You can find it on desktop under: https security google com settings/security/permissions

nuschpl said:
Google allows you to revoke device access selectively, you don't need to change password AFAIK it's base for derriving access key,password itself it isn't stored on device. You can find it on desktop under: https security google com settings/security/permissions
Click to expand...
Click to collapse
Wow, thanks lol I just did it I revoked the device, so it should be gone haha I revoked the active one now to make sure haha and the phone asked me to sign in again thank you very much
It's just frustrating because I can't turn the phone on lol to see but that's worked thankyou I think the flashtool will of worked anyway haha I just wanted to make sure
you'd think I was hiding top secret stuff or somethink the way i'm going on about it hahaa

Related

ok i need help i updated the phone to the latest update.now stuck service mode

hi.
so i think i need help. i updated the phone few days ago to the latest firmware. and the phoen was fine for the next 2 days. i never had to restart or anything. today one of my games wasnt working so i figured my phone might need a restart.
anyway i did. and now my phone is stuck in some service mode i assume ? its a triangle with screw driver inside and a blue moving bar under it.
i dont know what to do. my phone isnt rooted or anything. i didnt even attempt to root after the update. nothing. just restarting the phone :/
am i f**ked ? :/
How did you update, OTA or pushed via FlashTool?
Dinkoz said:
How did you update, OTA or pushed via FlashTool?
Click to expand...
Click to collapse
flashtool
The only thing you can do in situations like this, as told in every such thread, is reflash with the flashtool.
Will FlashTool pick it up when connecting via Vol -Up? If so, try pushing the FTF again,even a different FTF?
i will try when i get home to see if it will pickup the flashtool.
it kinda sucks tho. why it did this ? i didnt even install anything in the stupid thing aside from few games. jesus.
What FTF did you use ? I would suggest using another just in case, you may / may not need to wipe data
the one from the main thread :/. " not the one with the typo "
i think its from singapore one ? because it had some stuff from that country.
i will go home in 1 hour or so and try to flash without wipe.
finger crossed :/
its not accepting the flashtool.
i turn the device off. i click on the back botton. but nothing.
the log says the file is connected in fast boot mode. but there is nothing . i still get the pop screen that shows the instructions how to plug your device.
any help
ll_l_x_l_ll said:
its not accepting the flashtool.
i turn the device off. i click on the back botton. but nothing.
the log says the file is connected in fast boot mode. but there is nothing . i still get the pop screen that shows the instructions how to plug your device.
any help
Click to expand...
Click to collapse
Volume down and plug the usb.
Sent from my C6603 using xda premium
ok. by miracle i got it to work. but i am not sure what happened and why it did this.
all good i guess :/
also, i wonder if there is an official version of this. not bloated with weird stuff. like euro version or something.
also. one more question.
is there a root for this ?
Reinstall the software with sony update service is what you have to do
http://www.sonymobile.com/gb/tools/update-service/
glad to read that is fixed ..
I had this same issue yesterday. I installed the the update from the India c6602. Things were working fine the first day. I did a reset and then had the same issue as the OP had.
A re-flash with the flashtool didn't work the first time and the I tried the Sony companion fix option, and still had problems. Then I realized I had to install the drivers. Are you on windows 8? did you install the drivers that came with the flashtool? I did and then re-flashed, and now its fine again.
ll_l_x_l_ll said:
ok. by miracle i got it to work. but i am not sure what happened and why it did this.
all good i guess :/
also, i wonder if there is an official version of this. not bloated with weird stuff. like euro version or something.
also. one more question.
is there a root for this ?
Click to expand...
Click to collapse
Most people seem to have flashed the Global FTF, you could reflash the old firmware, then when you plug into PC Companion it should flick up the update for you/your region.
I would just flash Global

Xperia Z continous reboot loop

http://www.youtube.com/watch?v=RKjDP9ZvusE
I have this problem.. My Xperia Z continue to reboot after few seconds from start.. I Already tried PC Companion, SUS, FlashTool with stock and Nothing continue to reboot ... Please someone help me.. If there's no solution .. I can bring it to service? I flashed a ROM and unlocked the bootloader, but having reflashed the Stock original and the bootloader Relocked I can use my warranty? PC Companion recognized the phone as original
Maybe I flashed the wrong stock? Can someone tell me, the right stock for my c6603?
need help please!
What if you connect your phone with the charger? does it reboot?
gripfly said:
What if you connect your phone with the charger? does it reboot?
Click to expand...
Click to collapse
Yep!
freno25 said:
Yep!
Click to expand...
Click to collapse
Ok, the battery isn't it I think.
How do you flash and what do you flash?
Please write it down step by step.
gripfly said:
Ok, the battery isn't it I think.
How do you flash and what do you flash?
Please write it down step by step.
Click to expand...
Click to collapse
Ok, first of all when I buy the phone Xperia Z (C6603/L36h) it work good, but after few days don't recognize the sim card for good.. I don't know if it mean somethings or if because I cut my sim to microsim but I does for good.. After some reboot it rework without ploblems. So it was a temporary problem (30 mins).. Ok second, I unlocked my bootloader and then I flash this ROM -> PAC-ROM http://forum.xda-developers.com/showthread.php?t=2208249 this version -> http://forum.xda-developers.com/devdb/project/dl/?id=1774 and then the gapps. All work fine because I does with other phones, after few days the phone start to reboot loop, but after some reboot it end after an hour like.. but start to recognize the sim and not, like he want.. like a mad.. after 1 days start to reboot loop like the video so after bootanimation the phone stay on, but after 30 secs reboot and again and again, I stopped this with POWER+VOL UP. I try to flash these stock because I don't know which use:
1) C6603_10.1.1.A.1.253_GLOBAL_unbranded_LTE -> After This I Try PC COMPANION (So I have to relock the booloader) but nothing SUS too
2) C6603_10.1.A.1.434_UK unbranded -> This won't work like the video so it start and black screen, the app system crash
3) C6603_10.3.1.A.0.244_Generic CE
4) C6603_10.3.1.A.0.244_Generic_DE
5) C6603_10.3.1.A.2.67_Generic UK
Ok. And now tell me exactly how do you flash with FlashTool.
gripfly said:
Ok. And now tell me exactly how do you flash with FlashTool.
Click to expand...
Click to collapse
With the lastest version of flashtool .. by pressing the first button "Flash device" and on the next windows "Flashmode" .. I select the firware and check all wipe.. the rest of checkbox unchecked .. Then "Flash" and when the programm ask to me put the device with the usb and vol down I does and done.
can u tell how to know the original firmware? On the box of the phone say: "SI 1270-6876.6 PL" from this I can found the firmware?
freno25 said:
can u tell how to know the original firmware? On the box of the phone say: "SI 1270-6876.6 PL" from this I can found the firmware?
Click to expand...
Click to collapse
Yes but you do not need exactly this firmware. Every generic firmware is the same. So you can download generic sweden or generic uk or whatever.
Edit: i think it is a hardware problem. Because you wipe all datas, made a clean flash and that more than once. But wait a bit, maybe a person which had the same prob can say it you. Or go and read a bit in the pac thread.
gripfly said:
Yes but you do not need exactly this firmware. Every generic firmware is the same. So you can download generic sweden or generic uk or whatever.
Edit: i think it is a hardware problem. Because you wipe all datas, made a clean flash and that more than once. But wait a bit, maybe a person which had the same prob can say it you. Or go and read a bit in the pac thread.
Click to expand...
Click to collapse
Yep it is very likely a hardware problem.
As this does not happen to other users.
Rather send your Z™ in repair.
Sent from my white Xperia™Z
Tommy-Geenexus said:
Yep it is very likely a hardware problem.
As this does not happen to other users.
Rather send your Z™ in repair.
Sent from my white Xperia™Z
Click to expand...
Click to collapse
After 1 days of researching Thanks to my SI I found the real original firmware and by another guide I downloaded the firmware by pc companion.. So now the problem is just one.. My sim card if I don't put the sim reboot because still searching, if I put a sim don't recoinize it and say "insert the rim and reboot" but ask me the pin of sim O.O, but if I turn THE FLIGHT MODE don't reboot and the sim work, like I can Import my contacts etc.. so the sim work too, the phone too , what's the problem then? O.O
up
Same issue with me. 1st, no sim error. After few days, its start to shutdown itself. But still can on. After that stuck at sony logo. Maybe radio related issue because it wont shut itself in recovery cwm nor twrp. But if I booting as usual, after several second it shutdown. Btw, production week 13W13
Sent from my R800i using xda app-developers app
My problem solved by changing new battery!!
Sent from my C6603 using xda app-developers app

[Q] Completely Dead

Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Click to expand...
Click to collapse
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
eclyptos said:
What is this?
Did you Backup TA? Did you followed this instructions HERE?
If you did not, then you was asking for troubles.
Click to expand...
Click to collapse
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right.
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
TommyX235 said:
I started the Flashtool .. clicked on BLU and followed the instructions.
ANd the flashtool successfully unlocked the booloader
But thats not my problem. The Phone is dead.. I does not give
any lifesignes .. also the backup is useless if i cant get flashboot
or any way to use adb .. to work.
Click to expand...
Click to collapse
Well if you want to sell it then I might want it as my screen got cracked
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
Hi
...
thanx
Thomas
Click to expand...
Click to collapse
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
eclyptos said:
Yes it is a problem.
Even in this Tutorial is all well explained that you have to use the OFFICIAL Sony way to unlock Bootloader,
http://forum.xda-developers.com/showthread.php?t=2440597
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
Maybe I am wrong but this is how supposed to be to avoid issues.
Then you phone is bricked and you have to follow other instruction to check if still can be resurrected, there is many Threads on XDA about this.
Click to expand...
Click to collapse
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
gregbradley said:
Leave it on charge for 24 hours and then try turning it on.
Please let us know tomorrow if anything changes
Click to expand...
Click to collapse
i'll give it a try! Thanx!
TommyX235 said:
Wow i haven't thought that I get some nagging here instead of constructive suggestions. In any case i will let the phone on the charger for 24 hours and see if it helps. Also I DON'T THINK THIS IS A BOOTLOADER ISSUE!!! All worked fine.. I booted into ihackers 4 multiple times without any problems.. Also the Phone would show ANY signes of life, eg. LED RED or blinking etc..But nothing
ALSO:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Let us hear how it goes with it...
Sent from my C6903 using XDA Premium 4 mobile app
TommyX235 said:
"..you did not followed the instructions and you unlocked with Flashtool which probably did not do his job right."
In the "getting started" thread of z1 it is suggested to use the flashtool! And like i said .. it finished successfully..
Thank you for your answer and the nagging...
Click to expand...
Click to collapse
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
I don't understand what went wrong. After flashing the Kernel and Baseband the flashtool said everything went fine eand restarted the device. It turned off and nothing since then. I cant even get into flashboot or flashmode. It feels likt the accu is broken because there is nothing happening whatever i do. I think there is no power. I will not open the device because i still have 2 years of waranty (i hope they repair it as waranty case, if i am lucky) Else I will pay for the repair. We'll see. If this is an accu failure it should be a waranty case.
I had it for about 8 hours on the charger without any signs of "life" in the "machine". Sometimes i feel like trowing it against a wall to see if it reanimates it... But i can keep myself from doing it. =)
We'll see..
probably stupid guess: maybe ur phone just stucked on something and may not be completely switched off??
press vol+ and power button, see if ut vibrates 3 times
if it does, congrats an flash kernel again
TommyX235 said:
Hi
what i did.
I unlocked the Bootloader via Flashtool
Rooted the device
Installed TW Recovery.
Installed iHackers 4.
All was fine until i saw the i wasnt connected to my Network Provider .
AHH i forgot to flash "Xperia Z1 - C6903 - Kernel + Baseband [14.3.A.0.757].ftf"
So i went into flashtool and flashed it, excluding everything execpt Kernel and Baseband.
The flashtool finshed and the device shut down. And thats it. Since then nothing. Not even
the led or something is showing any lifesignal. I tryed every button combi. The red reset button.
Tryed to enter flashmode.. NOTHING!!! What the ?! ANy ideas what i can do?
Last time i checked the accu was @ 93 %. I have it now on the charger dock hoping it is just a battery issue. No combination (pwr+vol+ or pwr+vol- etc.) working so far.
thanx
Thomas
Click to expand...
Click to collapse
Is it getting red led when you try to charge it?
If not then its Sony's problem probably a faulty device. Send warranty and don't mention bootloader, root or ROM.
yup owns Z1 and stuff.
z1 completely dead
my z1 completely dead, I instaled hi hackers rom and went well after finishing flashing i did'nt get network of airtel and instaled baseband of 3rd party and it is completely dead nothing is working when i press volume+on button it vibrates 3 times thats it and nothing is displayed and when i put to the charge it shows red light and stops,can anbody help me out from this, please only 3 months old my z1 and sorry for my english ....and can anbody reply what to do next friends?
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
gregbradley said:
Hard reset.
Flash a stock FTF using flashtool.
If that does not work, leave it on charge overnight and try again tomorrow
Click to expand...
Click to collapse
ok Dude i tried for flashing by pressing volume down button its not working .
while i try plug data cabel it will show blue led for a 2 seconds confirm its charging r i dont know? OK
I will try keeping overnight charge and i will try tomorrow. Thanks
---------- Post added at 09:20 PM ---------- Previous post was at 09:08 PM ----------
eclyptos said:
Ok, If you are so sure then Ok, but still weird, as I follow different instruction and never had a problem then people do on they way and later have problems. It can be a coincidence and maybe is not your case, but sometime thinking easy can compromise the whole process.
I flashed different patches on mine Kernel I kill my phone few times and mine was completely dead, no led nothing, but it boot into Flashmode or Fastboot, you have somehow go in that mode and flash again, this is the only soft solution.
If you will not be able to do so then you have to go with the Test Pins, open your back cover and try to resurrect it, the hard way.
Click to expand...
Click to collapse
how to use Test pins procedure by opening back cover give me the details?
srichinu said:
how to use Test pins procedure by opening back cover give me the details?
Click to expand...
Click to collapse
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
gregbradley said:
There is no test point on 2013+ devices
Try again in the morning and let me know how you get on, I will help you then
Click to expand...
Click to collapse
Ok sir i kept for charge for more than 6 hours but i think nothing charged i tried by all methods by volume+ and on button,flash mode by connecting data cabel by pressing volume down as a flash but still it is in same condition. please advice me what to do next.
thanks?
Go through the process of flashing a FTF and please post the output of flashtool here.
Sony PC Companion
Have you try Sony PC Companion program?

Sony Xperia Z - failed update - dead phone - HELP !

I tried to update my Sony Xperia Z through Pc Companion to android kitkat... All was good until the program poped up a window and said that it couldn't download it anymore because of a network problem ( my internet connection was good, no problems ). And from that point on, when i try to open the phone it says " the software update failed, make sure the phone is connected to the computer and try again " and blacks out... also i think the battery is dead and i cannot charge it because it says only that and turns off...
Please help me... I don't know what to do anymore...
i tried with sony update service, it downloads the update and when it's about to install. says to make sure the battery is fully charged and try again... and i cannot do that... What to do ????
If it matters, it's a C6603 ...
sorry for my english..
M.B.C. said:
I tried to update my Sony Xperia Z through Pc Companion to android kitkat... All was good until the program poped up a window and said that it couldn't download it anymore because of a network problem ( my internet connection was good, no problems ). And from that point on, when i try to open the phone it says " the software update failed, make sure the phone is connected to the computer and try again " and blacks out... also i think the battery is dead and i cannot charge it because it says only that and turns off...
Please help me... I don't know what to do anymore...
i tried with sony update service, it downloads the update and when it's about to install. says to make sure the battery is fully charged and try again... and i cannot do that... What to do ????
If it matters, it's a C6603 ...
sorry for my english..
Click to expand...
Click to collapse
Press power and vol up for several seconds and put it an the wallcharger. Let it charge for several hours and try to update again
St.Jimmy90 said:
Press power and vol up for several seconds and put it an the wallcharger. Let it charge for several hours and try to update again
Click to expand...
Click to collapse
It doesn't work!
When i plug it in the wall charger is doing a restart loop, with the sony logo, then the message a wrote earlier " the software update failed, make sure the phone is connected to the computer and try again " and a red led light, and it's the same thing over and over again...
That's my concern...if i damaged the phone...i mean, if i can't recharge it, i can't do nothing...
There must be some way to fix this..please help...
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Mr.KiLLeR said:
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
Download SUS (formerly SEUS) from here: http://www.sonymobile.com/global-en/tools/update-service/
avindal said:
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
M.B.C. said:
avindal said:
I had the same problem as OP and resolved it using SEUS - can confirm that it works.
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
Okay, might be able to help you.
You can manually flash a ftf file to make your phone work
Click to expand...
Click to collapse
M.B.C. said:
I did said that i tried olso the update service from sony, and when it finishes the download and begins to install the update, after 15 to 20 seconds or so, pops up a message and says to make sure the battery is fully charged and try again.
Click to expand...
Click to collapse
Oh I didnt read that .. then the only thing you can try is using Flashtool and flash the firmware manually.. it should work..
Mr.KiLLeR said:
Oh I didnt read that .. then the only thing you can try is using Flashtool and flash the firmware manually.. it should work..
Click to expand...
Click to collapse
Firstly i want to note that my battery is certainly dead, and i can't charged it beacause of the restart/boot loop that i mentioned in my early posts...if yes, can you guys provide me with necesary tools, firmaware and stuff, because after all the attempts i tried, i'm afraid to do something else to the phone. I mean i was stupid in the first place to not ask how to do it properly, and i don't want to lose the phone...
And sorry if my English is rough
M.B.C. said:
Can you guys provide me with necesary tools, firmaware and stuff, because after all the attempts i tried, i'm afraid to do something else to the phone. I mean i was stupid in the first place to not ask how to do it properly, and i don't want to lose the phone...
And sorry if my English is rough
Click to expand...
Click to collapse
You can download Flashtool from FlashTool Latest Version
Download the Firmware from Firmware Downloads according to your device model ..
My battery is surely dead..check my last edited post.. Can i still intall the firmware in this case ?
M.B.C. said:
My battery is surely dead..check my last edited post.. Can i still intall the firmware in this case ?
Click to expand...
Click to collapse
You can give it a try , just follow the instructions and then flash
Mr.KiLLeR said:
You can give it a try , just follow the instructions and then flash
Click to expand...
Click to collapse
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
M.B.C. said:
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
Click to expand...
Click to collapse
Did you put phone in fastboot mode?
M.B.C. said:
It didn't work... the green bar loaded a few seconds, then it camed to a complete stop. I left it about an hour, and nothing changed...
Click to expand...
Click to collapse
Tell me the procedure you did ...
Mr.KiLLeR said:
Tell me the procedure you did ...
Click to expand...
Click to collapse
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
M.B.C. said:
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
Click to expand...
Click to collapse
Lol that is not a problem.. Be careful next time...
Sent from my C6603 using Tapatalk
Siny Update Service
Mr.KiLLeR said:
Download Sony Update Service (SUS) and then update from there it will fix it
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
My phone was dead and the resurrection came easily with SUS dowloaded with Chip.
Thanks for the advice!
:laugh:
Bricked!! -.-
Hey guys, I don't know if this is out of topic but since this is for xperia z bricked, I'll show my problem.
So, I updated my xperia z for 3 times since I bought it, It came with Android 4.2.2 and the updates were all OTA.
Then, sudently It started to reboot itself and entering in bootloop.. Then, I tried to use flashtool but always gave me error about S1 flash, and then "Error: Flash Aborted"
So I tried to unlock my bootloader several times (Yes, several times, because it was always saying ok, but then it was showing "ROOTABLE") then, when I Finally got it unlocked, I couldn't flash anything because it was gaving me error saying that couldn't write boot.. Then, Tried Pc companion but again, failed, and my phone was stuck in "Update failed (...)"
Then finally, I flashed advanced kernel by DoomLord and entered in CWM, but when I tried to wipe factory reset, It was saying that couldn't mount data.. Then, I have formated the Data and Media (SD Card) And then, I was able to do factory reset, but, then, I went to advance and did reboot recovery.. My phone turned off, but never came on... I arrived at home and connect ti to wall charger, but no sign of life, nothing, not even red led or anytihng.. NOTHING!! Don't know what happened.. I really need help on this man, please :c
how u resolve ur problem for xperia z buddy....I have same problem just like u faced
M.B.C. said:
In the end i went today to a service, and solved the problem! I couldn't stand it anymore.. Don't ask me how the guy did, he just did...
Anyway, thank you guys for the support, i apreciate it !!! :good:
Click to expand...
Click to collapse
how u resolve ur problem for xperia z buddy....I have same problem just like u faced, no battery charging and cant update phone, always showing software update failed make sure that your phone is connected with computer

Wrong soft according to IMEI

Hey there i just noticed few things so just to make it clear igot Z from trade S3 for Z i dont have waranty all i have is a box phone and Swedish manuals. Im a bit confused cause box says its C6603 and bottom of the phone says the same C6603 after pressing *#06# imei shows the same as on the box from C6603 but when i go to settings and check device info it says C6602 http://zapodaj.net/bc7beb6231a48.png.html ill upload 2 images to let you guys check whats wrong. http://zapodaj.net/b8d6cd6d7be46.png.html
What makes me wonder how the hell I have C6602 fw in C6603? Any solutions? My phone so far stuck on 4.1.2 can't even update via OTA cause it says my phone got all updates so should I somehow install a proper soft with latest update 4.4 to C6603 or C6602? Im confused since I haven't got those kind of problems with any of my phones.
Djor said:
Hey there i just noticed few things so just to make it clear igot Z from trade S3 for Z i dont have waranty all i have is a box phone and Swedish manuals. Im a bit confused cause box says its C6603 and bottom of the phone says the same C6603 after pressing *#06# imei shows the same as on the box from C6603 but when i go to settings and check device info it says C6602 http://zapodaj.net/bc7beb6231a48.png.html ill upload 2 images to let you guys check whats wrong. http://zapodaj.net/b8d6cd6d7be46.png.html
What makes me wonder how the hell I have C6602 fw in C6603? Any solutions? My phone so far stuck on 4.1.2 can't even update via OTA cause it says my phone got all updates so should I somehow install a proper soft with latest update 4.4 to C6603 or C6602? Im confused since I haven't got those kind of problems with any of my phones.
Click to expand...
Click to collapse
Okay, the reason might be the person who sold you the phone flashed C6602 firmware on the device.
Flash C6603 firmware and everything should be fine
But how come is it possible to flash,different FW on model which shouldnt support it? Im scared dun wanna brick my precious Z
Could you lend me a hand how to do that im completly blonde in that.
Djor said:
But how come is it possible to flash,different FW on model which shouldnt support it? Im scared dun wanna brick my precious Z
Could you lend me a hand how to do that im completly blonde in that.
Click to expand...
Click to collapse
Bro 6602 firmware can be flashed on 6603 as hardware is nearly identical.
Now to rectify the problem follow the below instructions .
You can download kitkat stock firmware for 6603 from here
Download flashtool to flash firmware from here
How to flash instructions are given below
Download and install the Flashtool
Next go to where you installed flashtool folder in C drive and then to the drivers folder.
Run the Flashtool-drivers.exe file.
Xperia Z drivers, flashmode drivers and fastboot drivers.
Accept all the prompts and once finished load flashtool
Click the thunder button on top left
Now select flashmode
Select the firmware you want to flash
Turn off phone(Hold power and both the volume keys till you feel 3 vibrations)
When it tells you to connect hold down the volume button and connect usb to phone
Flashing will start
After flashing is complete boot the phone
Let me know if help is required dont worry it will not brick your device i had used the same method to update to kitkat
Edit : Keep the firmware ie the ftf file in the firmware folder of flashtool
androidtweaker1 said:
Bro 6602 firmware can be flashed on 6603 as hardware is nearly identical.
Now to rectify the problem follow the below instructions .
You can download kitkat stock firmware for 6603 from here
Download flashtool to flash firmware from here
How to flash instructions are given below
Download and install the Flashtool
Next go to where you installed flashtool folder in C drive and then to the drivers folder.
Run the Flashtool-drivers.exe file.
Xperia Z drivers, flashmode drivers and fastboot drivers.
Accept all the prompts and once finished load flashtool
Click the thunder button on top left
Now select flashmode
Select the firmware you want to flash
Turn off phone(Hold power and both the volume keys till you feel 3 vibrations)
When it tells you to connect hold down the volume button and connect usb to phone
Flashing will start
After flashing is complete boot the phone
Let me know if help is required dont worry it will not brick your device i had used the same method to update to kitkat
Edit : Keep the firmware ie the ftf file in the firmware folder of flashtool
Click to expand...
Click to collapse
Thanks babe ill try that in next days and post it if i suceed ;*
Djor said:
Thanks babe ill try that in next days and post it if i suceed ;*
Click to expand...
Click to collapse
:good::fingers-crossed::highfive: I am a guy BTW so calling babe is out of place
Im a girl btw so calling you babe is on a right place
Mwah!
Djor said:
Im a girl btw so calling you babe is on a right place
Mwah!
Click to expand...
Click to collapse
:good::highfive:
Hi! Im gonna flash my phone in few hours but im wondering do i need root for that cause i don't have it and i don't know how to root it ~.~ if needed
Djor said:
Hi! Im gonna flash my phone in few hours but im wondering do i need root for that cause i don't have it and i don't know how to root it ~.~ if needed
Click to expand...
Click to collapse
You wont need to root for flashing :good: don't worry go ahead and happy flashing
PS: Take a data backup as clean flash will wipe all data
I changed my config number to get generic US FW because my phone was running indian FW. Basically if you root, you can modify some text in a configuration file and trick the phone into thinking it's a model that it really isn't. More info here:http://forum.xda-developers.com/xperia-z/help/how-to-change-si-sony-xperia-z-t2271530
Root is also super easy - Google towel root, it is a recently discovered exploit that allows for one click rooting more or less.
Question... my phone vibrated 3 times and nothing -.- when i plug it to usb it's just charging :/
i don't get it... i got the window saying
Unplug device (done)
Power off (done)
Press the back button? (undone) since i don't have back button beside that one on the screen so im stuck here-.-
Djor said:
Question... my phone vibrated 3 times and nothing -.- when i plug it to usb it's just charging :/
Click to expand...
Click to collapse
Hold volume down key and connect usb to get in to flashmode :good:
omfg sorry im blonde mayby thats why ill try now .:victory:
http://zapodaj.net/bdfd75985c98e.jpg.html thats what happen :/ and i installed (ALL) drivers
http://zapodaj.net/6cacd3d6c4e36.jpg.html while flashing on 10% i get disconnect and now can't turn my phone on cause it says something about software omg what can i do....broked my phone
Djor said:
http://zapodaj.net/6cacd3d6c4e36.jpg.html while flashing on 10% i get disconnect and now can't turn my phone on cause it says something about software omg what can i do....broked my phone
Click to expand...
Click to collapse
Have Inboxed you pls check

Categories

Resources