Dear All,
May I know is any way can turn up phone volume, means incoming call (etc, edit registry)?
Have you tried moving the slider on the side of the phone during the call? Or do you want it louder that what can be achieved using this system?
athena99 said:
Dear All,
May I know is any way can turn up phone volume, means incoming call (etc, edit registry)?
Click to expand...
Click to collapse
hi athena99, please check out Tuatara's post: 3 Rings Delay ... & Volume Fixed thread, read through the thread first before installing anything.
tried it before & working fine in Himalaya, but never felt the need to install in BA. you may want to update us if it worked for you.
I can't mute the call on phone flipped face down and also can't mute the ring when receiving call, can someone please help? Thanks in advance.
kevinlong said:
I can't mute the call on phone flipped face down and also can't mute the ring when receiving call, can someone please help? Thanks in advance.
Click to expand...
Click to collapse
i think just clicking volume button is mor easir, yes flipping is mor smarter thats all..
Phone locked?
Have a read at my post here..
http://forum.xda-developers.com/showthread.php?t=406271&highlight=mute
Same for you?
I have a serious problem with my new diamond....
When I get an incoming call, I often miss the call because the phone is really slow to ring/vibrate...
I can see that at least for two of callers rings before it rings/vibrates on my end, the touch pad lights up/flashes. But unless you are physically watching your phone all the time, you have no chance to react in time..
Especially becase the lag-of-death os (wm6) takes eternity to figure out that Im actually frantically pressing 'answer call'
Is there some sort of registry hack for this?
Disabling the phone skin helps (download Schap's Advanced Config) and gives you back about 10Mb of memory. Also, some people say that moving from a .wav ringtone to an mp3 helps. I've not tried the latter but it certainly helped on previous PPCs.
Don't have any suggestions for your problem, but I do have a question of my own:
Who hangs up after 2 rings!?!
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
aydc said:
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
Click to expand...
Click to collapse
And the answer to that would be - HTC
BTW just a suggestion, if it might help ...
You can set alerts for missed calls - Start - Settings - Sounds and Notifications.
So.. in case someone does give you a missed call (one or two rings and then disconnects) - you will be notified with a sound. As opposed to pulling the phone out of your pocket - after 30 minutes and then noticing that you have a few missed calls from people who disconnected after 2 rings
Hope this helps.
the thing is that when the phone starts ringing, I need to react... it does actually happen that it is not in my hand, but on the table somewhere etc..
then by the time it rings the second time I get to it, and press answer.. wm6 then takes 2 years to figure out that the moron holding the phone has actually pressed te button..
by then its up to at least 5 rings on the other end... then a lot of people hang up...
what I would like was to tweak the phone to ring immedeately instead of the initial blinking for two rings...
yea someone do help out in this aspect please...
i for one have free incoming call.. so its pretty wasteful to call back a missed call when actually i could have answered it fast enough..
and im using a mp3 ringtone.. din see much improvement..
As told before: seems the diamond dialer interface is causing most of the pain. disabling it makes it respond faster.
but maybe...
someone made a custom VGA version of our Diamond dialer skin: http://forum.xda-developers.com/showpost.php?p=2365614&postcount=16
perhaps if we install this we get our Diamond skin back but without delay (???). it's worth a try, I will try it later.
disadvantage: 5 Mb extra storage space consumed.
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
yes its bad.. or not good enough...
did you notice that the ring on your diamond is in fact blinking for those two first rings?
So the phone knows someone is calling you, but delays the ringing?
It's really not that big a deal..
I mean.. so it rings a few seconds later... I mean.. err.. compare that to.. NOT BEEPING AT ALL when you receive an SMS (thanks for the tweak) or an EMAIL (hoping to find a tweak)..
Yeah, it's a problem.. just not that big a problem.
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
kurgandk said:
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
Click to expand...
Click to collapse
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
L o r d R a j said:
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
Click to expand...
Click to collapse
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
Click to expand...
Click to collapse
well for me its bad, and theres plenty of other people that feel likewise..
I agree it is bad and would also like a solution.
Most people who ring me get two rings before my phone even plays the MP3 and 2 rings later the answer phone kicks in.
It would be nice if the MP3 played as soon as the LED flashed like it should..
kurgandk said:
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
Click to expand...
Click to collapse
Well Good for you.
kurgandk said:
well for me its bad, and theres plenty of other people that feel likewise..
Click to expand...
Click to collapse
**** happens. All the best.
RSkillz said:
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
Click to expand...
Click to collapse
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
pietrucci said:
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
Click to expand...
Click to collapse
I mean the default dailer interface m8. I'm calling it the 'new dailer' because the tweak set you back to the old one (default WM6.1).
Sorry for confusion
Ok you guys and dolls with the slow response: what ROM are you using?
I use the 1.93 (from Walshieau) en did the test many times today with the diamond dialer active. Result: the moment the phone goes over my Diamond responds. Exactly at the same time!
I did it with the device on, device off, waited 10 minutes, all the same result: immediate answer.
Are there any guys who use 1.93 and experience the delay or am I the only lucky bastard?
BTW: I use radio 1.00.25.05
Hi All
I don't want to disable "Call waiting" but I don't like the continuous beep I get when there is a second incoming call while I am already in a call. Is there a way to disable this beep?
Thanks in advance
Mike
mcored said:
Hi All
I don't want to disable "Call waiting" but I don't like the continuous beep I get when there is a second incoming call while I am already in a call. Is there a way to disable this beep?
Thanks in advance
Mike
Click to expand...
Click to collapse
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
I am also interested to know if the notification beep can be stopped after one or two beep. Actually its very irritating if the beep is prolonged until the other party hangs up the call.
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
To get notified of the second incoming call, I could have an option to vibrate the phone without getting continuous beep. I am not sure how this is possible, may be I have to try a custom ROM?
Incoming second call beeps
It’s very Annoying the beep of the incoming second call because it’s a continue beep until the call drops, is there are a way to put the beep just to hear 1 or 2 beeps?
+1 to all the above, It drives me mad, But i dont want to disable it because it could be important and i could put caller number 1 on hold and take call number 2
But usually its my mate who never puts the phone down and this beeping will go on for ever, And i cant hear much of the current call because of it.
I would like the option to have 1 or 2 beeps, just to let me know, Or intermittent vibrations... i could deal with the phone vibrating for ages, JUST NOT THE GOD DAMN BEEPING !!!!!
it makes me want to get my *beep*ing phone and smash the *beep*ing *beep* out of it lol
Cant you change it through Call Settings>Voice Call>Call Waiting? You can also change notifications through Call Settings>All Calls>Alerts on Call
Hope this helped.
EDIT: Sorry I should have read your first post better about not wanting to disable call waiting.
Sent from my A501 using XDA App
Annoying continuous beeping
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
The incoming call should go to VM. It's impossible to focus on your call in progress w the beeping.
Were is the answer can you disable the incoming beep?
Guys I have strange problem, well I think it is problem. Whenever I set ringtone any ringtone on my Note, and when someone is calling me, phone is ringing with very low sound for 1 or 2 seconds, and then immediately is increasing to high sound. I checked, rechecked the settings but I could not find any settings for this. Is this normal for every Note out here ? ? ?
Thank you
this is normal.. it is programmed like that..m getting the same.
priyanv said:
this is normal.. it is programmed like that..m getting the same.
Click to expand...
Click to collapse
Thanks mate, this is a relief
spike15_mk said:
Guys I have strange problem, well I think it is problem. Whenever I set ringtone any ringtone on my Note, and when someone is calling me, phone is ringing with very low sound for 1 or 2 seconds, and then immediately is increasing to high sound. I checked, rechecked the settings but I could not find any settings for this. Is this normal for every Note out here ? ? ?
Thank you
Click to expand...
Click to collapse
Its a feature increasing ringtone ! If you have a custom rom like Checkrom then you can disable it by installing a zip and then you will have a normal ringing ringtone and not the gradually increasing ringtone!
Cheers!
abhisahara said:
Its a feature increasing ringtone ! If you have a custom rom like Checkrom then you can disable it by installing a zip and then you will have a normal ringing ringtone and not the gradually increasing ringtone!
Cheers!
Click to expand...
Click to collapse
I am still on stock ROM.