Related
Hello, I've recently tried installing Topogigi's ICS v30a ROM from ParanoidAndroid. During the process, I've upgraded CWM to 6.0.1.2 and performed a full dalvik, cache and data wipe on my phone. I first tried installing Topogigi's ICS v30a ROM using an earlier version of CWM without any success however after upgrading to a newer version of CWM and installing the rom, my phone appears to be hard bricked. Once I turn on the phone, the LG logo appears and then it shuts down within seconds. Entering recovery mode only gives me a blank screen. Any ideas?
EDIT: got it fixed by installing a new baseband thing (don't fully understand it 3 using this: http://forum.xda-developers.com/showthread.php?t=1008070
EDIT: Can't get the new custom rom to install, tried deleting all the data from paranoid android and it still boots up as paranoid android. Please help!
you best bet is to do a full NVflash install then update using CWM,
try this following directions in the OP, http://forum.xda-developers.com/showthread.php?t=2007968
then update using topo's V30a.
the NVflash is a unbrickable solution. make sure you install the drivers for the phone you can get them in this pack http://forum.xda-developers.com/showthread.php?t=1975274&highlight=apx+drivers
then do the directions in Topo's OP and you should be running a pretty decent version of V30a.
let me know if you get stuck anywhere.
Hello necrowakker,
Thanks for your help, I've installed nvflash however I haven't a clue how to flash this rom using nvflash. I can't find the .bat file inside, only a boot.img and system.img file. I've downloaded version 1.1 of topogigi's rom and tried flashing with CWM 6.0.1.5 after doing a full data, cache and dalvik wipe but without any success.
Thanks again for your help!
Hi,
I have installed Trickdroid, and CWM Touch.
I have reinstalled a Nandroid Backup to go back to 100% Factory. Ok that Work Fine.
Then i try to install Stock Recovery via AIO Tool (later via CMD), and it says that flashing the recovery was successfull.
But when i Try to go into recovery, i can t.
It "freeze" with the HTC Logo, and it says "Entering Recovery..."
When i Install CWM again, CWM works fine.
But i really need the Stock Recovery!!!
What can i do?
Greetings
This seems to be a common problem with new threads on this everyday, have a search and you will see :thumbup:
Did you clean the cache?
Sent from my HTC One using xda app-developers app
Hi,
I used the forums search funktion, but i dont found help?
Yes, i Clean the Cache many times!
Now i have installed CWM and this runs perfekty. But i really need the Stock Recovery........
So, i used now my boot.img from my STOCK Backup, and flash it via
fastboot flash boot boot.img
Rebooten
fastboot usb
fastboot flash recovery recovery.img
reboot
BUT THIS DONT WORK TOO
Have a look here http://forum.xda-developers.com/showthread.php?t=2232250
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
synthecypher said:
I'm following this tutorial on how to root my Orange UK GT-I9305 LTE Unlocked phone running 4.1.2.
Everything goes fine with Odin the phone reboots, then I unplug and turn off my phone, and boot into recovery mode only to find it hasn't installed and Android system recovery 3e is still there.
Any ideas what I'm doing wrong?
Click to expand...
Click to collapse
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
JJEgan said:
Not flashing as instructed is the usual .Like unzipping the file or wrong file faulty file download .
Try another recovery.
jje
Click to expand...
Click to collapse
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
synthecypher said:
I did follow them to the letter, does installing CWM Recovery actually root the phone or is "rooting" the phone a different process entirely that's required for installing CWM Recovery?.
:laugh:
Phone: Samsung Galaxy S3 LTE
Model Number: GT-I9305
Build Number: JZO54K.I9305XXBMF1
Click to expand...
Click to collapse
All depends upon the package but most CWM are root and recovery .
TRYhttp://forum.xda-developers.com/showthread.php?t=2002953
Ended up using Auto-Root which seemed to work no problem.
synthecypher said:
Ended up using Auto-Root which seemed to work no problem.
Click to expand...
Click to collapse
I initially had a rooted stock ROM that i was using for ages then upgraded to a custome ROM but for personal reasons decided to go back to stock.
Loaded stock ROM with intention of rooting only to get rid of bloatware, but not one of the ODIN Flash recoveries work at all, not one, so like you ended up using CF Auto and that worked but now im still stuck with Stock Recovery. I dont understand why none of the recoveries flash when they did before.
Cheers
trouble with cwm/ twrp
Hi all. Yes I'm a noob and I wouldn't ask If hadn't tried a plethora of ways to install either cwm or twrp.
It took me a good hour to find this thread so hope I'm in the right place.
Ok I used odin to root and cwm didn't stick so still on stock rec. However I used framaroot to get super su working and titanium says I'm all rooted up. Other apps only for root also work.
I've since tried using goo manager and Rom manager to install cwm or twrp and both say unsupported.
I've searched these here threads and found a few with same problem namely when using odin cwm wont stick and android reinstalls stock recovery.
So I'm a bit stuck, I'm rooted but have no cwm or twrp.
Any help would he much appreciated.
Try Philz recovery .
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
thanks !
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone. untick the reboot option. then when odin is done flashing and says pass shut down the phone . dont let it boot up.once phone is off you can boot into recovery by vol up+hom+power Here is the tricky part. as soon as you see the white samsung start to load aka bootloader screen release the power button but continue to press volume up and home. you should see the circle with the hat symbol. and enter into clockworkmod once in clockwork mod you will need to wipe data cache and dalvick DO NOT WIPE SYSTEM then flash a custom rom zip that you have previously copied to either your extsdcard or sdcard0 at the same time you probably will want to flash gapps as well. the thing is if you boot up before entering recovery . the default native recovery from samsung will take its place back. maybe it is easier to just flash rom manager in the play store. flash clockworkmod and then boot into recovery from the app itself. I9300 is supported . dont know about I9305
Click to expand...
Click to collapse
Thats exactly how I understood the cwm not sticking problem. I have tried rom manager and said not compatable with my device as did goo manager for twrp. I think odin is the only way I get it to stick. So il flash in odin and il try to get into cwm as it boots and wipe those two files you mentioned.
But then can I just boot up as normal ? or will android try to reflash its stock rom ? Damn my phone for being so difficult
I only ask because I haven't decided what CR to use yet (or even looked for any). I was gonna get it all ready first then learn how to install a CR - 1 thing at a time i thought.
Anyway thanks for your help :good:
JJEgan I found Philz thread to be helpful but something I feel Im just not ready for. Im new to this and although the updated cwm looked cool there were just to much going on, maybe for a later day.
Thanks all the same :good:
wiping data plus cache plus dalvick cache is done to prepare your phone for the custom rom that you are going to flash. the wiping is to clean those partitions because if they are not erased you will have problems. especially if you go from one android version to another or touchwiz to aosp. it is done so you get a clean install with minimal issues. if it is not done you will most likely bootloop. effectively it is a factory reset. all of your apps and app data will be gone so you do not want to do that unless you have backed up your apps . however sometimes google automatically installs them after you sign in.
I am not sure why clockwork mod does not stick but if you copy the rom you want to your phone install clockworkmod with odin and then use clockwork mod to flas the rom and gapps package then factory reset you will not have the stock recovery anymore. but this has to be done without booting into android stock . PLEASE FOLLOW THE FLASHING INSTRUCTIONS TO THE BEST OF YOUR ABILITY. AND UNDERSTAND ANYTIME YOU FLASH OR MODIFY YOUR PHONE YOU VOID YOUR WARRANTY AND POSSIBLY CAN CAUSE IRREPARABLE DAMAGE. BEST OF LUCK!
---------- Post added at 04:28 PM ---------- Previous post was at 04:24 PM ----------
Also philz recovery is highly recommended
HERE IS SOME VERY GOOD READING http://forum.xda-developers.com/showthread.php?t=2362743&highlight=philz+recovery http://forum.xda-developers.com/showthread.php?t=2344125
think I got it lol
Ok that's sounds good. However I've just read the threads you linked and now I've got to back up my imei and NV files first or il loose them when flashing. The procedure is all there and seems doable for a noob but i read some peeps are having trouble just doing that. I really wanted to root/install a CR regardless of the troubles cos I want full access and more importantly want to learn all the ins and outs so I can get the best use from my phone so glad I found this forum cause I'm sure I would have bricked my phone otherwise.
Might I ask if I've got this right tho?
1: backup imei/NV files
2: use odin to get cwm to stick using your method
3: boot into cwm to wipe data/dalvick cache and gapps
4:use cwm to flash a CR
5:factory reset
I think that's right?
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
i had the same Problem before.
I Just disassembled the battery after a full-wipe for few minutes and it works... i don't know y, but that was the only way... ?!
brilliant thanks!
ashraf sharif said:
CLOSE
1 BACKUP EFS FOLDER(IT CONTAINS imeiAND SERIAL NUMBER AND OTHER NETWORK SETTINGS) MAKE AT LEAST 2 BACKUPS ONE FOR EXTERNAL SDCARD AND ONE TO KEEP ON YOUR PC
2 INSTALL CWM RECOVERY USING ANY WORKING METHOD. byTHE WAY PHILZ CAN BACKUP EFS.
3 IN CWM RECOVERY MAKE A NANDROID BACKUP OF YOU CURRENT ROM. I FORGOT TO TELL YOU THAT ,THIS IS IN CASE YOUR FLASH FAILS YOU CAN RESTORE CURRENT ROM FROM BACKUP. ALWAYS BACKUP BEFORE A FLASH
Am I backing up to ext SD card?
4 IN CWM RECOVERY WIPE DATA, CACHE , AND DALVIK CACHE
5 IN CWM RECOVERY FLASH ZIP FOR ROM AND FLASH ZIP FOR GAPPS "GOOGLE APPS"
Are these seperate zips?
6 BOOT ANDROID THIS MAY TAKE UP TO 10 MINUTES FOR THE INITIAL BOOT. BE PATIENT. IF IT BOOTS YOU ARE DONE
7 IF PHONE DOES NOT BOOT THEN IN RECOVERY WIPE DATA AND CACHE AND DALVIK AGAIN
8 STILL NOT BOOTING FLASH ROM ANG GAPPS AGAIN
NOT BOOTING? RESTORE NANDROID
FACTORY RESET=WIPE DATA AND CACHE
DONT EVER WIPE SYSTEM UNLESS YOU HAVE A RECENT NANDROID. NANDROID IS GOOD BUT THE OLDER IT IS THE MORE LIKELY IT IS TO GET CORRUPTED
ALSO IF YOU GET FORCE CLOSES FIXING PERMISSIONS USUALLY WORKS FOR THAT.
SOME ROMS ARE FLASHED IN DIFFERENT WAYS .ALWAYS FOLLOW THE DEVELOPERS INSTRUCTIONS
Click to expand...
Click to collapse
Thank-you for all that,I really appreciate it.
Can I ask the difference between the apps nandroid manager and titanium? I've backed up with both and wondered if i really needed to? The nandroid backup was nearly 3gb!
Also I was gona backup with qpst for imei and NV files but then read its only for US versions? Will the backup of efs folder include those?
honestly i really dont know what the differences are. l do not use custom recoveries or custom roms. i dont use titanium backup .Any rom I flash i get from sammobile.com. one reason i do not use custom roms is that none can support mhl. I use a monitor and bluetooth mouse and keyboard . without mhl I cant mirror my screen so i always stay with stock roms. i use Xposed framework for modifications.
ashraf sharif said:
I have never used a custom recovery on this phone but i think i read somewhere that when flashing by odin the thing to do is not let odin reboot the phone......
Click to expand...
Click to collapse
thx you so much. this was the secound s3 that had this issue. deactivating auto reboot did the job!!!!
I tried rooting my Sony V, but its ended up in disaster where the phone doesnt boot past sony xperia part and just loops.
I tried to root it via this link:
http://forum.xda-developers.com/showthread.php?t=2090319&page=2
Through" Gasai Yuno" step by step instructions. I have tried to originally flash my phone using the"TRIMMED-LT25i-SOL21_9.0.F.0.195.ftf or the original LT25i-SOL21_9.0.F.0.195.ftf " but it turned out a disaster.
I managed to get the bootlocker unlocked but even that seem to have re-setted everything on my phone to default and deleted everything on my phone.
SOMEONE HELP PLEASE!
All I wanted to do was load this ROM.
http://forum.xda-developers.com/showthread.php?t=2500671
Those instructions are for Android 4.0.4-based firmware. Obviously the phone will bootloop if you flash 4.0.4 over 4.1.2.
Use Flashtool to flash it to a proper 4.1.2-based firmware and get root using Binary's scripts.
You could also flash a custom root-enabled kernel using fastboot if you unlocked the bootloader.
manloonw said:
I managed to get the bootlocker unlocked but even that seem to have re-setted everything on my phone to default and deleted everything on my phone.
Click to expand...
Click to collapse
Unlocking the booloader always resets all data, it's normal.
thanks guys really appreciate the help!
Any chance you can guide me in the right direction to a 4.1.2 based firmware?
This thread has FTFs for .140. You could just search the forum for "LT25i FTF" yourself, you know.
http://forum.xda-developers.com/showthread.php?t=2227747
Ok I flashed it back to normal then I tried to install CWM Recovery through this link: http://forum.xda-developers.com/showthread.php?t=2012738
Using this method:
"Installing CWM for the first time is as simple as:
Download CWM v4 installer for ICS if you are on Ice Cream Sandwich or CWM v9 installer for JB if you are on Jelly Bean, and unzip
Enable USB debugging and connect phone to your computer
Run install.bat/install.sh"
After that I tried installing this: http://forum.xda-developers.com/showthread.php?t=2500671
But it failed and gave me error7 I think it was, so I tried to forget about the rom and tried reboot the phone back to normal but now the phone doesn't go past Sony on boot up, and I can't load up CWM.
PLEASE HELP!
Flash the .140 FTF using Flashtool once again.
manloonw said:
Ok I flashed it back to normal then I tried to install CWM Recovery through this link: http://forum.xda-developers.com/showthread.php?t=2012738
Using this method:
"Installing CWM for the first time is as simple as:
Download CWM v4 installer for ICS if you are on Ice Cream Sandwich or CWM v9 installer for JB if you are on Jelly Bean, and unzip
Enable USB debugging and connect phone to your computer
Run install.bat/install.sh"
After that I tried installing this: http://forum.xda-developers.com/showthread.php?t=2500671
But it failed and gave me error7 I think it was, so I tried to forget about the rom and tried reboot the phone back to normal but now the phone doesn't go past Sony on boot up, and I can't load up CWM.
PLEASE HELP!
Click to expand...
Click to collapse
Just for Information... Most flashable ROM zips do wipe the system partition before the actual install begins - as a result, your recovery (which is for locked bootloaders and thus stored on system partition) is also gone. Which means that on reboot neither rom nor recovery is present to be booted in.
So in the case of a broken rom zip or errors in CWM, it is important to either flash another (working) rom zip and the CWM-self-installer zip directly afterwards or restore a (hopefully) previously done nandroid backup.
Otherwise, you'll need your pc to setup your phone again ^^
Sent from my LT25i using xda app-developers app
Hi, device is rooted, and clockworkmod recovery 6.0.4.5 installed.
ROM is JB, the official update from LG. Today device reported there is an update to the installed firmware.
I rebooted in CM recovery, took a nandroid backup, booted, and accepted to download the official update to my official JB rom. After downloading I was asked to reboot (in order to install), and the phone reboots to the CM recovery.
From there I don't know what to do. I have tried rebooting, but again find myself to the CM recovery. I have tried "reboot to bootloader" and get stuck at the LG boot screen logo with the message "Now Ready!" in tiny white letters on the upper left corner.
I would try "install zip" but I don't know where the downloaded update is (if it even is in an acceptable zip format)
Phone isn't bricked, I guess I can always restore from the recently taken backup, but I really would like to know if there is a way to install this update.
Thank you
http://forum.xda-developers.com/showthread.php?p=50645445
Could you please please please try to search the next time I've seen this question for probably 3-4 times
Sent from my LG-P880 using xda app-developers app
you can't ota over unlocked bl/cwm, you must flash update manually
moneyvirus said:
http://forum.xda-developers.com/showthread.php?p=50645445
Could you please please please try to search the next time I've seen this question for probably 3-4 times
Click to expand...
Click to collapse
You're right, but you know, sometimes you just can't nail the right keywords especially if its not your native language. I searched, but obviously not good enough.
Rudjgaard said:
you can't ota over unlocked bl/cwm, you must flash update manually
Click to expand...
Click to collapse
Sadly, this seems to be the case.. bummer.
Thanks everyone
Not even my nandroid backup can help me get to where I was before? So much for nandroid being the ultimate backup, a "snapshot image" of the device...
So, what if, I use CM recovery to install a custom rom, and then restore from my nandroid backup (being the official JB) ?
Flash with kdz flasher original ROM then flash cwm you can put back your backup. I think the problem starts that the update pushes something in the boot section that is expecting an other (read original) recovery . when you installed cwm it boots up cwm so that's why an nandroid backup doesn't work I think ( to be honest I'm not 100% sure this is correct)
Sent from my LG-P880 using xda app-developers app
I can't even flash cyanogenmod???
I downloaded latest stable build, copied it to sd card, selected it from the CM recovery ("install zip"), installed fine, reboot, still stuck at CM recovery!!!
What gives?
EPa said:
I can't even flash cyanogenmod???
I downloaded latest stable build, copied it to sd card, selected it from the CM recovery ("install zip"), installed fine, reboot, still stuck at CM recovery!!!
What gives?
Click to expand...
Click to collapse
Have you yet followed the advice and installed the KDZ?
Trying to avoid that, as it seems too much work for a phone that was working fine, and stuck to recovery due to some silly boot flag or something.
Saw it as a chance to try cyanogenmod. But it seems having CM recovery and the cyanogenmod rom on the sd card won't cut it! Talk about failure..
EPa said:
Trying to avoid that, as it seems too much work for a phone that was working fine, and stuck to recovery due to some silly boot flag or something.
Saw it as a chance to try cyanogenmod. But it seems having CM recovery and the cyanogenmod rom on the sd card won't cut it! Talk about failure..
Click to expand...
Click to collapse
I don't think you will have a choice. If you created the nandroid backup on your SD card then you aren't going to lose it, so just flash the KDZ, root again and install your backup, or accept the LG update and rebuild all your software again.
Yes, one thing is for sure. I had to install the KDZ to be able to proceed with anything..
It's just funny having a working CWM recovery and a cyanogen rom on the device and after flashing it, still not having a device that boots. A "recovery"/flash tool, should be able to "recover" from such a situation..
EPa said:
Yes, one thing is for sure. I had to install the KDZ to be able to proceed with anything..
It's just funny having a working CWM recovery and a cyanogen rom on the device and after flashing it, still not having a device that boots. A "recovery"/flash tool, should be able to "recover" from such a situation..
Click to expand...
Click to collapse
You can't blame the recovery. It is clearly stated many, many times that you should never attempt an official OTA update with a non-standard (rooted or recovery installed) device. On other devices you could even hard-brick AFAIK, so consider yourself lucky that you only had to reflash a KDZ and start again.
For restoring stock rom use this: http://forum.xda-developers.com/showthread.php?t=2682146 I can confirm it works and it is (very) easy.
Yes that's what I used and I also confirm it works and is very easy.