So im 4.4 on my Moto x, and im a bit unsure of the procedure to root my phone and how to back it up. I know how to unlock my bootloader and I've done that already. but how do I backup my /system and stock recovery? I want to have a way to revert back to get OTA's
Kittiesoncrack said:
So im 4.4 on my Moto x, and im a bit unsure of the procedure to root my phone and how to back it up. I know how to unlock my bootloader and I've done that already. but how do I backup my /system and stock recovery? I want to have a way to revert back to get OTA's
Click to expand...
Click to collapse
After you unlock the bootloader you probably flashed the TWRP .img? At that point you should have made a backup of system, data, and boot. So know you have a backup of stock everything except for recovery. You could have performed a recovery dump via ADB/Fastboot before the TWRP flash.......BUT, under system/ is a file at the bottom called recovery-from-boot.bak. At any time you can remove the .bak and when you reboot to recovery, you should be in stock recovery. If you need TWRP again you have to fastboot flash it again. :good:
Alright, this is my first full day with my new contract-free Moto X on Sprint. It runs Android 4.4, and the system 143.44.8.ghost_sprint.Sprint.en.US. I already have the necessary drivers and adb installed on my Windows computer.
I am trying to root my phone. Having come from the original Epic 4G, I am used to doing my research quite thoroughly. From what I have seen, while Sprint CLAIMS that the bootloader is unlocked, you actually have to get the unlock code from Sprint. Fine, the phone has now been unlocked, but still not rooted. The two prevailing lines of research are to either run SlapMyMoto (this the phone is already on 4.4), but that only seems to serve Verizon and AT&T devices, and line 2 is to flash a recovery like TWRP (official, but I've never used) or CWM (unofficial, but used on Epic 4G). I've tried two different .img files for TWRP: twrp-2.6.3.1-ghost-4.4.img and openrecovery-TWRP-TEST#3-ghost.img, but attempting to enter Recovery from Fastboot simply displays a persistent black screen. Still no root.
What am I still missing in regards to installing a recovery software? I already have SuperSU v1.93 copied over to the phone, but I can't get anywhere without the recovery software to install it. Any and all advice is greatly appreciated.
Dante of the Inferno said:
Alright, this is my first full day with my new contract-free Moto X on Sprint. It runs Android 4.4, and the system 143.44.8.ghost_sprint.Sprint.en.US. I already have the necessary drivers and adb installed on my Windows computer.
I am trying to root my phone. Having come from the original Epic 4G, I am used to doing my research quite thoroughly. From what I have seen, while Sprint CLAIMS that the bootloader is unlocked, you actually have to get the unlock code from Sprint. Fine, the phone has now been unlocked, but still not rooted. The two prevailing lines of research are to either run SlapMyMoto (this the phone is already on 4.4), but that only seems to serve Verizon and AT&T devices, and line 2 is to flash a recovery like TWRP (official, but I've never used) or CWM (unofficial, but used on Epic 4G). I've tried two different .img files for TWRP: twrp-2.6.3.1-ghost-4.4.img and openrecovery-TWRP-TEST#3-ghost.img, but attempting to enter Recovery from Fastboot simply displays a persistent black screen. Still no root.
What am I still missing in regards to installing a recovery software? I already have SuperSU v1.93 copied over to the phone, but I can't get anywhere without the recovery software to install it. Any and all advice is greatly appreciated.
Click to expand...
Click to collapse
Why are you even bothering with SlapMyMoto when your bootloader is unlocked? I don't understand why people continually ask about how to root when they've already unlocked their bootloader...SlapMyMoto works for all Moto X variants, not sure where you got the impression that it only works for VZW and ATT.
Flash a recovery (CWMR or TWRP) using "mfastboot flash recovery recovery.img", use VOL- to scroll down to recovery then VOL+ to select. Once in recovery, "adb push su.zip /sdcard/" then flash it from within the recovery. From there, you can select reboot from within the recovery or type "adb reboot".
okay...so if i'm running the 4.4 update on my Sprint Moto X, and have unlocked the bootloader, I just need to flash a recovery image and flash the SU zip through the custom recovery, correct? No mucking around with downgrading to 4.2.2 post-cam update etc?
mrao said:
okay...so if i'm running the 4.4 update on my Sprint Moto X, and have unlocked the bootloader, I just need to flash a recovery image and flash the SU zip through the custom recovery, correct? No mucking around with downgrading to 4.2.2 post-cam update etc?
Click to expand...
Click to collapse
Correct
Sent from my Moto X using Tapatalk
Any luck on this? I have a Sprint one and have unlocked my bootloader as well. However, after pushing TWRP recovery and trying to boot into it, I'm unable to flash SU.zip. After a normal reboot, TWRP recovery no longer exists (seems like a persistency issue?).
Anyway, after unlocking my bootloader, what are the next steps?
Out of all the Android phones I've had, rooting this one has been the most difficult by far...call me a noob.
CartlandSmith said:
[STEP-BY-STEP INSTRUCTIONS] Unlocking and Rooting a Dev Ed Moto X Running Kit Kat
Works for any unlocked bootloader Moto X running kit kat, not just dev eds.
Click to expand...
Click to collapse
Worked - thank you!
Related
hi there every one i updated my nexus one to 2.3.6 (GRK39F) from stock 2.3.4 (GRJ22) sorry but i did not read the post for to upgrade and keep root before upgrading to 2.3.6 and now i am suffering and thought it is not a good idea to post a question there so posting here
my problem is when i upgraded 2.3.6 i was rooted and had clockworkmod recovery image and i had a backup from rom manager as well but before upgrade i wiped the partition and cache and after upgrade i dont have SUPER USER permission nor the clockworkmod recovery tried to flash su.zip from sd card but no luck please can anyone help me get my root back pleaseeeee i need help ....
You'll have to passimg back to an earlier version of Froyo, root, restore your backup, and then flash the update and su zip...
danger-rat said:
You'll have to passimg back to an earlier version of Froyo, root, restore your backup, and then flash the update and su zip...
Click to expand...
Click to collapse
Thankyou very much danger-rat really appriciate your help but today was a bit lucky day for me
I tried to flash a recovery image through ADB and then it went well and then flashed the su.zip from sdcard that gave me superuser permission again thanks again for your help
@0mpranav
No need to flash the system partition, no need to use ADB, just flash Superboot:
Code:
https://bexton.net/2011/09/24/root-access-for-nexus-one-on-android-2-3-6-grk39f-superboot/
If your bootloader is unlocked all you have to do is reboot into fastboot mode. Flash a custom recovery such as RA or CWM, reboot directly into revovery and flash su.zip or whatever flash zip you used to root your device before. Reboot and you are rooted once again.
The following thread has a step by step how to do it. It's fast and easy.
http://forum.xda-developers.com/showthread.php?t=1019759
jboxer said:
If your bootloader is unlocked all you have to do is reboot into fastboot mode. Flash a custom recovery such as RA or CWM, reboot directly into revovery and flash su.zip or whatever flash zip you used to root your device before. Reboot and you are rooted once again.
The following thread has a step by step how to do it. It's fast and easy.
http://forum.xda-developers.com/showthread.php?t=1019759
Click to expand...
Click to collapse
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
GldRush98 said:
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
Click to expand...
Click to collapse
I have purchased two second hand Nexus Ones. The first thing I did after receiving them and charging the battery was to reboot into fastboot mode and issue "fastboot oem unlock" command. Since they were purchased second hadn I didn't thing I had a warranty anyway so unlocking the bootloader seemed to be a non brainer.
GldRush98 said:
Yup. This is the way every one should be doing it. It's sort of the whole point of the Nexus One. It has an unlockable bootloader.
Click to expand...
Click to collapse
Will any version of su.zip, and fastbook.zip work? What about recovery-RA-passion-v2.2.1.img? or should we be using a different version?
If we should be using different versions of those, could you link to where we could get them?
I've had my Nexus one half-rooted since 2.3 came out, and I haven't been able to root it back.
why mess with 2.3.6 just use oxygen 2.3.7...
kuljit55 said:
why mess with 2.3.6 just use oxygen 2.3.7...
Click to expand...
Click to collapse
I'm sorry I have no idea what that is. I don't even know if its helpful at all. Again, I don't even have root, or a custom recovery. Presently, I have an unlocked bootloader, ADB on my PC, and a half-rooted nexus one from before 2.3.
I have absolutely no idea how to do anything presently, and when someone tells me that trying to root on 2.3.6 is futile and to just use a custom update, it doesn't make any more sense to me.
Care to elaborate past one line that doesn't help at all? Hell when using shell commands through adb, it keeps on saying "permission denied" any time I type in su.
You have an unlocked bootloader, so flash a custom recovery via fastboot, and use the custom recovery to flash the su zip...
danger-rat said:
You have an unlocked bootloader, so flash a custom recovery via fastboot, and use the custom recovery to flash the su zip...
Click to expand...
Click to collapse
Thanks Danger-rat. Although I know you said nothing different that what was already said in this thread, I figured that since you didn't give me specific info about whether or not there were multiple versions of su.zip or fastboot.zip, I figured I should take that as a "No.", so I went for it. All re-rooted now.
I appreciate the help.
EDIT: So if you are as new to this stuff as I am, anyone else who's reading-
You can DL su.zip from http://www.google.com/url?sa=t&sour...ZxOuf9Kw_URvtvh9Q&sig2=Hj72LDNoiBq2Zoa4QquZWQ
and fastboot.zip from http://www.mediafire.com/?ttdkgamud3j
and amon Ra 2.2.1 from http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-passion-v2.2.1.img
then follow the directions here: http://forum.xda-developers.com/showthread.php?t=1019759
** Note: again, these are for people who have unlocked bootloaders. For that info, you'll have to go elsewhere, but it should be readily available, such as this stuff is. I'm just linking it again because I know how frustrating it can be for people like me who aren't too well versed in rooting/unlocking yet.
Downgrade 2.3.6 to 2.2.2 - Nexus One
Problem:
I would like to downgrade my Nexus One to 2.2.2, because I've had non-stop problems with Gingerbread.
So I've gone through the Bootloader -> Recovery -> apply sdcard:update.zip steps, and it fails. This begs the question, how do I go from 2.3.6 to 2.2.2?
Fix:
Generally, phone manufacturers will not allow you to downgrade for various reasons. The stock recovery does indeed validate the update image, so that it's of a greater (or same) version than the installed system. With the Nexus One being a developer phone, you can unlock the bootloader and replace the recovery image with the one that doesn't perform this check, and will allow installation of any image. The caveat is that unlocking the bootloader voids your warranty with the carrier (and sometimes the manufacturer too,) and wipes all user data off the device.
Unlocking the N1 is dead easy. Just install Android SDK and the USB drivers (located in "google-usb_driver" directory.) Then restart the phone in bootloader mode by shutting it off and powering on while holding down the trackball, hook it up to the computer via USB, and in command prompt issue the following command: C:\<path to Android SDK>\tools\fastboot oem unlock. You will be presented with a confirmation screen with further instructions. Upon successful unlock, you can flash a custom recovery that will allow you to install any custom ROM, including downgrade to 2.2.x stock version of Android OS.
To flash ClockworkMod recovery, download the latest version for Nexus One from here, reboot into bootloader mode (power on while holding the trackball down,) and in command prompt issue command C:\<path to ANdroid SDK>\tools\fastboot flash recovery C:\<path to downloaded img>\recovery-clockwork-3.0.0.5-passion.img
Reboot to bootloader mode again, and then use the Volume keys to highlight the "Recovery" option and press Power button. You are now in ClockworkMod recovery, and can flash any custom ROMs via the "Install zip from sdcard" option.
Here is a "stock" 2.2.2 ROM (with root) off XDA-developers forum.
http://forum.xda-developers.com/showthread.php?t=927935
source:http://android.stackexchange.com/questions/13933/downgrade-2-3-6-to-2-2-2-nexus-one
Try It & Report Back...
I have an htc One running on the Reliance Network. Versions 4.1.2 / 1.29.651.10
It is Bootloader Unlocked with TWRP 2.6.0.1 and root
I have downloaded the mouthful OTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2-1.29.651.10_release_326731tcfazf1gnytc7g74.zipOTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2
-1.29.651.10_release_326731
When I try to flash it using TWRP it bombs out as there is no MD5 file.
I have two queries:
1. How do I update the TWRP to 2.6.3.0?
2. How do I install the update.
I prefer to use the fastboot method?
I have downloaded the update to my PC since aborting deletes the file. Also, I have the TWRP on my PC.
Please advise and help.
Check PM
sgiitk said:
I have an htc One running on the Reliance Network. Versions 4.1.2 / 1.29.651.10
It is Bootloader Unlocked with TWRP 2.6.0.1 and root
I have downloaded the mouthful OTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2-1.29.651.10_release_326731tcfazf1gnytc7g74.zipOTA_M7_WL_JB_50_SPCS_Sprint_WWE_1.31.651.2
-1.29.651.10_release_326731
When I try to flash it using TWRP it bombs out as there is no MD5 file.
I have two queries:
1. How do I update the TWRP to 2.6.3.0?
2. How do I install the update.
I prefer to use the fastboot method?
I have downloaded the update to my PC since aborting deletes the file. Also, I have the TWRP on my PC.
Please advise and help.
Click to expand...
Click to collapse
You cannot upgrade when your phone is rooted(i got to know from hetaldp)
I upgraded to JB 4.3, it awesome. Touch is Excellent. i too use relaince. there are no issues.
BUT remember you cannot root again, as over i am facing problems,,,
check : http://forum.xda-developers.com/showthread.php?t=2494594
So Please kindly wait, till the root for hTC ONE for upgraded JB 4.3 one Comes...
Are you using Sprint or T-Moile or Version HTC ONE?
To get upgrade installed, please un-root, relock, and then you can perform the update...
[email protected] said:
You cannot upgrade when your phone is rooted(i got to know from hetaldp)
I upgraded to JB 4.3, it awesome. Touch is Excellent. i too use relaince. there are no issues.
So Please kindly wait, till the root for hTC ONE for upgraded JB 4.3 one Comes...
Are you using Sprint or T-Moile or Version HTC ONE?
To get upgrade installed, please un-root, relock, and then you can perform the update...
Click to expand...
Click to collapse
It is Sprint, and from Hetal. Unrooting and relocking can be a pain, reloading everything. However, for almost two years I did not do any work on the Android side, so have forgotten everything.
I do not mind a locked phone it I can get to 4.3
Can you please pm me with the unrooting, relocking and the 4.3! Root for 4.3 is inevitable - just a matter of time.
Following the GooManager route I managed to get TWRP 2.6.3.0 installed, except the phone did not reboot. I did check it is 2.6.3.0.
Now the problem of the OTA remains. Maybe I will be forced to follow pm.mohanani's route of relocking. I cannot understand if I relock the bootloader then is not the unrooting automatic!
Also, Mr Mohanani GooManager requires root, so do not bother.
Managed to upgrade to 4.3 using Sprint_HTC_One_m7wls_3_04_651_2_RUU from Android Central as suggested by Hetal. I had to do a <fastbook oem lock> first. No problems except it wiped the data totally. Working fine. I have a few points / questions
1. Booting into Recovery is showing the Red Exclamation in a Triangle. Obviously not working, as in rooted!!
2. The Boot into recovery is showing both [RELOCKED] and S-off.
- Is this the cause?
- As per Hetal S-off means that I can root straight away irrespective of the Relocked status
- I guess OTA to KitKat (when it comes) is also a no go.
- What recovery is suggested TWRP 2.6.3, CWM (version?), or some other. This means that 4.4 will again be a full reload.
- Any fixes?
sgiitk said:
Managed to upgrade to 4.3 using Sprint_HTC_One_m7wls_3_04_651_2_RUU from Android Central as suggested by Hetal. I had to do a <fastbook oem lock> first. No problems except it wiped the data totally. Working fine. I have a few points / questions
1. Booting into Recovery is showing the Red Exclamation in a Triangle. Obviously not working, as in rooted!!
2. The Boot into recovery is showing both [RELOCKED] and S-off.
- Is this the cause?
- As per Hetal S-off means that I can root straight away irrespective of the Relocked status
- I guess OTA to KitKat (when it comes) is also a no go.
- What recovery is suggested TWRP 2.6.3, CWM (version?), or some other. This means that 4.4 will again be a full reload.
- Any fixes?
Click to expand...
Click to collapse
There is no need to accept the OTA if you are s-off
bigdaddy619 said:
There is no need to accept the OTA if you are s-off
Click to expand...
Click to collapse
Thanks. So I will again wait for the 4.4 RUU to be available on XDA or somewhere, and then install and forget OTA.
The point is recovery. I presume with S-off custom recovery must to be installed.
Do I install TWRP which takes care of root or do you suggest some other route, ie, root (how?) > recovery.
sgiitk said:
Thanks. So I will again wait for the 4.4 RUU to be available on XDA or somewhere, and then install and forget OTA.
The point is recovery. I presume with S-off custom recovery must to be installed.
Do I install TWRP which takes care of root or do you suggest some other route, ie, root (how?) > recovery.
Click to expand...
Click to collapse
Install TWRP 2.6.3.0
Option 1 flash SuperSU or another superuser file and run stock rooted
Option 2 flash a custom rom
Still stuck. I downloaded GooManager, and it will go into download > nowstarting and hang forever. I was advised to go the adb fastboot way, i.e.
download latestTWRP image filethen
adb reboot bootloader
then when I get
ui fstboot
fastboot flash recovery <twrp-recovery-name.img>
and its done.
I downloaded the .img file. Put everything into c:\recovery. Moved there under the command prompt. Plugged the phone into the computer, got both the drives (htc sync manager, and HTCONE) . So the connection was kosher.
Then gave adb reboot bootloader
The adb daemon started, but it found no device.
Obviously I being a noob in this game was missing something.
Also, I hear that the ROMs are available which to not reformat the storage. Are these the Deodexed versions or something.
Also, once in ten calls or so the screen goes totally blank at the end and is pain to restart the phone.
Checked up with http://forum.xda-developers.com/showthread.php?t=2497712
Seems that I am S-off but no rooted! Now what??
After a day or so and some cool thought I think I may have the problem identified. It is likely to be the lack of a root. I tried the following and the responses there from:
adb reboot bootloader
rebooted into bootloader Showing relocked and S-off. No fastboot option in the lower menu!
Now:
fastboot flash recovery openrecovery-twrp-2.6.3.0-m7wls.img
I get
sending recovery <8600kB>...
Okay [ 1.140s]
writing 'recovery'...
FAILED <remote not allowed>
finished. total time 1.170s
Any ideas, and when may I expect root for 4.3. At the moment the phone appears to be working file, but no recovery!! HELP!!
Do I need to unlock again despite S-off. Also, then what is the bitstream I send it from 4.3 - the same as the old one!!
Yes you need to unlock your bootloader again to be able to flash twrp
I did as per the htc route - Do the unlock, reinstalled the OS, download the bitstream, etc, and then the OS reloaded. Still Goomanager could not get TWRP 2.6.3.0 so used the fastboot route and succeeded in downloading it to the phone. Thanks for encouraging me and putting me on the right track.
Now ho to root. Then I may as well get Titanium up!
You can get SuperSU or Superuser from the playstore or install a custom rom.
A very interesting experience. I could not enter bootloader [Down-vol + power was just restarting the phone], even adb devices was drawing a blank. So I decided to do a factory reset from phone. Lo and behold it dropped me into the TWRP screen. I managed to root, restarted to the main Downloaded su checker which completed the root. Confirmed. Then downloaded Titanium with Pro license (I have it) and did a recovery. Also, TWRP Manager (downloaded) is working and I am able to start into bootloader, etc.
When I try and look for upgrades with TWRP installer it says none. I know 2.6.3.0 has been upgraded to 2.6.3.2 Let sleeping dogs lie.
Also, I have not checked with adb devices but I am sure that too will now work.
Thanks, but what is going on. Is it only God and maybe Google know what happened?
Thanks for helping, and keeping me going.
I had more or less decided to revert to 4.1 and do an S-on <fastboot oem writesecureflag 3> and bootloader lock and look for OTA!
Added on 25th November
adb still not recognising the beast. adb devices gets a blank list. Phone is available under Windows so drivers etc are Ok.
A noob question. I saw
Stock Rooted 3.04.651.2 Odex & De-Odexed
Insecure Boot img. init.d support, data/app support
Stock Rooted 3.04.651.2 Odex
Stock Rooted 3.04.651.2 De-Odexed
on the upgrade thread. Now what do the terms Rootedm Odex and De-Odexed mean to the average user. Stock means the basic htc ROM I presume.
Also, rooted means what stages are covered.
afaik to upgrade you lock the bootloader, do the upgrade, and then in normal situations again unlock the bootloader, root and install a custom recovery (TWRP does the rooting - hopefully).
Do these ROMs take care of some or more of these stages?
I just received my moto x developer version. I must be an idiot because I can't find instructions on how to root it. Every post I can find is about rooting the locked version. People talk about the fact that I don't need an exploit because my boot loader is unlocked. I get that but I don't know how to root. Can someone kindly point me to a tutorial on how to root if my boot loader is already unlocked.
Install a recovery from the dev section. Either TWRP or CWM will be fine.
Then download SuperSU
flash supersu in recovery.
Moto x - Developer edition root
gunnyman said:
Install a recovery from the dev section. Either TWRP or CWM will be fine.
Then download SuperSU
flash supersu in recovery.
Click to expand...
Click to collapse
Thanks! I'll give it a shot. Much appreciated!
There are a few threads... but to elborate on what gunnyman has said... If your bootloader is unlocked, either Dev Edition, or you have a phone from a carrier like T-Mobile or Sprint that allow you to unlock via Moto's web site then its pretty easy to flash alternate recovery, and root from there.
Steps see -> https://plus.google.com/110773150384694258853/posts/VhtJtg92sTP (has links to the files you need too.) and there are threads in the General and Developer sections here too.
Same process works if you have 4.2.2 or 4.4 on your phone.
Is there a way to root the developer edition and keep stock recovery ?
Pete
Flash custom recovery, flash root package in custom recovery, re-flash stock recovery
Sent from my Moto X DE
pasta1234 said:
Is there a way to root the developer edition and keep stock recovery ?
Pete
Click to expand...
Click to collapse
You don't have to flash the custom recovery, just boot into it. Once you have the root .zip on your phone reboot into the bootloader and fastboot boot (recovery) and flash the root zip from there. You will have root and stock recovery.
The reason I'm asking is to retain the ability to recieve OTA updates ?
How does one boot into a custom recovery without loading it?
Pete
3UR0TR45H said:
You don't have to flash the custom recovery, just boot into it. Once you have the root .zip on your phone reboot into the bootloader and fastboot boot (recovery) and flash the root zip from there. You will have root and stock recovery.
Click to expand...
Click to collapse
pasta1234 said:
The reason I'm asking is to retain the ability to recieve OTA updates ?
How does one boot into a custom recovery without loading it?
Pete
Click to expand...
Click to collapse
When you enter the fastboot command, use "boot" instead of "flash" and it will just temporarily boot into the recovery without flashing over the stock partition. You can flash the root zip as normal and when you reboot your phone, the custom recovery will be gone.
As far as receiving OTAs, I'm not sure if you'll get them or not. If you go modifying things like kernel, ROM, or even things like the build.prop, chances are it won't work or will break something. The good thing about having an unlocked bootloader is that it's nearly impossible to hard-brick the device unless you're reckless.
Are you sure this works? When I try 'fastboot boot recovery.img' it gives me a "failed command" error. I kicked off another thread asking how to do this since this is what I typically do with Nexus devices. I know that fastboot now has a -c command that might help but I don't know the magic to put after -c to make it work.
If anyone has been able to 'fastboot boot recovery.img' on a Moto X, please lemme know. This would be my preferred path rather than flashing the custom recovery and then the stock recovery back.
3UR0TR45H said:
When you enter the fastboot command, use "boot" instead of "flash" and it will just temporarily boot into the recovery without flashing over the stock partition. You can flash the root zip as normal and when you reboot your phone, the custom recovery will be gone.
As far as receiving OTAs, I'm not sure if you'll get them or not. If you go modifying things like kernel, ROM, or even things like the build.prop, chances are it won't work or will break something. The good thing about having an unlocked bootloader is that it's nearly impossible to hard-brick the device unless you're reckless.
Click to expand...
Click to collapse
pboggini said:
Are you sure this works? When I try 'fastboot boot recovery.img' it gives me a "failed command" error.
Click to expand...
Click to collapse
What happens when you just type fastboot?
Sent from my XT1060 using Tapatalk
This has been said already but you can just "fastboot flash recovery twrp.img", flash your superuser zip then "fastboot flash recovery recovery.img". You are using the correct image name in the command, correct?
Yes, this was said in the thread I started but then I saw someone suggest what I'd been wanting to do. To answer the questions, if I just type fastboot it gives me the help output like it should, fastboot devices shows my device, fastboot reboot works, fastboot reboot-bootloader works, etc. Essentially, I believe that either there is a command string that I could hand to -c or this just won't work on MotoX's like it does all the Nexus devices that I've played with.
Fortunately I did hit Moto up and they gave me permission to download the 4.4 image so I do have the stock recovery.
Ryno77 said:
This has been said already but you can just "fastboot flash recovery twrp.img", flash your superuser zip then "fastboot flash recovery recovery.img". You are using the correct image name in the command, correct?
Click to expand...
Click to collapse
Hello everyone,
First of all i'm new to Moto X forums, migrated from N4 for a change.
Just to be clear, i'm new to all these root things, but i'm clear with basics of rooting. So i want to confirm few things up, bear with me please!
Thanks to @KJ for an awesome guide.
I find this to be little too much to do all these things, as i'm new to this, so i'm asking, can i follow below steps to get root & custom recovery in my phone.
--Unlock bootloader via Motorola site
--Flash twrp via adb or some app like 'Flasher'
--Flash latest SuperSU via recovery
p.s. I'm using Indian version, not sure if it's XT1053 or XT1052
It will very helpful if someone will clear these things up for me.
Cheers!
to know if you can unlock your bootloader, you must visit the Moto Web site -> https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
NOTE: Unless you have a Developer Edition (woven white back, says Developer Edition on it), once you hit the final submit button to request the code, it voids your warranty.
If your carrier does not allow Motorola to give out bootloader unlock codes (like Verizon, ATT and Repulic Wireless in the USA), then there is the option of the China Middleman (see the thread in the general section for more info). This too will void your warranty, IF the warranty provider sees it.
Once you unlock your bootloader, which must be done via PC and the mFastboot command, and will completely reset your phone, so BACK UP YOUR DATA FIRST!!! then you can flash custom recovery, install SuperSU and be rooted.
Since you must use the code to unlock via mFastboot and the PC, you will be connected, so it only takes a few additional seconds to also use mFastboot to flash TWRP or other custom recovery. To get the recovery to "stick" you need to immediately reboot your phone into recovery (mfastboot reboot-bootloader then after the phone restarts, select recovery), that is when you when you can install SuperSU from recovery and be rooted.
I've used Rashr to flash TWRP and Stock Recoveries when doing the OTA (I put the IMG files and OTA.ZIP on my /SDcard first), and it works, BUT it was after I was already rooted.
Not sure what Flasher is.
Ok, here's the rundown - I have a VZW Moto X (XT1096). I previously ran mofo on it had flashed the 5.1 img files to it and so had 5.1 rooted, but with a locked bootloader. After learning that JCase had gotten sunshine to work on it I unlocked my boot loader. I then decided that because I was worried about having the a kind of mish-mash of systems on it, i.e., 5.0 bootloader (unlocked) with hacked and modded 5.1 system files flashed from mofo, that I wanted to start fresh. I then used the XT1096 flash to stock script and flashed back to 5.0 (there were a bunch of problems and bootloops and force closes, but I am happy to report I am now on a fully stock 5.0 with unlocked BL). Following being stock I have tried to take the OTA but have been unable to do so. When I try it OTA on my device it just sits at 0%. When I tried using MDM it gave me an error message that it failed to install the update - on the device it said getjar: unlocked.
So, now that I am on 5.0 with an unlocked bootloader I am not sure how to proceed with my priorities, Root, WiFi tethering and upgrading to 5.1. My questions are this:
(1) How can I upgrade to 5.1 or does my bootloader unlock preclude that?
(2) How best can I achieve root?
(3) Once I am rooted what do I need to do in order to enable wifi tethering?
Thank you so much!
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot and flash the stock system.img and recovery.img before doing the update.
3. I don't have experience with Verizon network. I use T-Mobile on this Verizon device and I just enable WiFi Hotspot. In the APN settings, in the "APN type" field, I add the value "dun". And set everything to IPv4.
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
Thank you for the reply - got the update to take and have gotten the device rooted properly.
Now I just need to enable wifi tether - anyone know what is done in the Mofo images that allows it - can i do the same here?
I am interested in this question as well. I am in the exact same boat as the OP, except I am still on a Mofo 5.1 img that is giving me issues. I'd like to flash back to stock and take the OTA. But wifi tether will be a must.
Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151
eksasol said:
Okay I can't help with all your issues since I didn't get that problem. It seems like whatever you did to install your phone back to 5.0 it wasn't a clean install or you didn't do a clean data wipe to remove errors, which caused it to not able to receive OTA. I do not believe unlocking bootloader preclude you from receiving OTAs because it worked for me.
1. What you should try to do is download this stock 5.0 firmware package, run the bat file with the latest adb/fastboot, then boot into recovery after that and do a data/cache wipe just to make sure. Then boot in the phone and try to do the OTA again.
2. To get root, I use TWRP recovery to flash SuperSU. This is the standard way in fact.
Download SuperSU.zip and put it in the phone: http://download.chainfire.eu/supersu
Get the latest TWRP image here for the Moto X 2014: https://dl.twrp.me/victara/
Flash the recovery using the command: fastboot flash recovery twrp-2.x.x.x-victara.img
Boot into recovery and flash the SuperSu.zip.
Note that now you have made changes to the recovery and system partition, so in order to receive future OTA updates, you need to use fastboot to flash the stock system.img and recovery.img before doing the update.
Can't help you with tethering since I don't have experience with Verizon network.
Click to expand...
Click to collapse
I tried this but after I flash TWRP I can't boot to recovery. If I choose recovery from the bootloader it just turns off the phone (charging icon). If I send it adb reboot recovery I get error android "No Command."
Flashed it multiple times, tried mfastboot, no luck. Any ideas?
Edit: I feel dumb. I was using power button to try to select, it's volume up. Good to go.
GatorsUF said:
Thanks to mikeoswego we have the tethering answer.
http://forum.xda-developers.com/showthread.php?p=62379151
Click to expand...
Click to collapse
The other method (the one I used) was to install the Xtether xposed module for the 2013 Moto X - worked perfectly for me.
I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?
SargeStryker said:
I feel like a complete noob for asking this in regards to my XT1096, but, how would I get rid of the unlocked bootloader warning message?
Click to expand...
Click to collapse
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478
juliospinoza said:
Flashing this
http://forum.xda-developers.com/showthread.php?t=2871478
Click to expand...
Click to collapse
Thanks!