Hi, Im a newbie and recently had the overcome and upgraded from Froyo to 2.3.6
Then upgraded to CM9 (said to be stable) using CWM
The problem now is that the Auto rotation sometimes dont work on that tab that is mainly used for reading in landscape mode :/
Thx a lot
Sent from my GT-S6802 using xda app-developers app
why CM9? use the latest ROMs, they're much more reliable and perform better. (CM10.2, CM11)
http://download.cyanogenmod.org/?device=p1
Related
Greetings!
I flashed darkys mod 10.1 and it seems that everything is working properly. I had battery drain issues, but I calibrated battery and it seems to work well now. Some apps does have crash issues now. But most unusual thing is, after I flashed it my android version seems to be upgraded to 2.3.3 or so my phone info tells me.. how is that possible? But if it really upgraded from froyo to gingerbread app crashing is normal I quess.
Real problem is, while I start/restart my phone, screen flickers and has odd color mess and then phone starts and after my phone starts and I launch some apps it does the same thing... Is it really a problem or just some miniatyre bug?
I didn't clean my phone as I flashed it, but that shouldn't be anykind of problem.
Hopefully you'll understand what I try to say and thanks for help.
Sent from my GT-I9000 using XDA App
Sound like you didnt follow the instructions?
Darkys is based on gingerbread 2.3.3 if it was your first time flashing darkys it is recommended to flash the Ficeto JVH rom first, if you didnt do this, its probably why you are having problems.
But I have flashed darky before. I had 9.5 first. How can I get these problems off? Do I just have to flash JVH and then 10.1?
Sent from my GT-I9000 using XDA App
Oh. Now I got it. Yes I need to flash JVH... But I got new problem... I can't get to recovery. When I try to boot from recovery, it just boots, freezes with odd color mess and does nothing. When I press power button it powers up phone and won't go to recovery. And no I don't have CVM but it haven't been problem before..
Sent from my GT-I9000 using XDA App
By CVM I meant clockworkmod app
Sent from my GT-I9000 using XDA App
I downloaded CWM still it doesn't launch recovery... And yes I know darkymod and cwm recoveries are the same
Sent from my GT-I9000 using XDA App
Which software with Android ICS design/system is the best one for the gt-p1000?
Sent from my GT-P1000 using XDA App
Guys i am searching for the same
Looking up for upgrading my p1000 os from GB to ICS
Is there any stable ics rom designed for p1000 along with kernel?
Sent from my GT-P1000 using xda premium
swananddeshkar said:
Guys i am searching for the same
Looking up for upgrading my p1000 os from GB to ICS
Is there any stable ics rom designed for p1000 along with kernel?
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
DominikHX said:
Which software with Android ICS design/system is the best one for the gt-p1000?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Non... all are based on GB kernel, so no real ICS for now
ICS but not really lock and feel is really great! > http://forum.xda-developers.com/showthread.php?t=1497872
DominikHX said:
Which software with Android ICS design/system is the best one for the gt-p1000?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Stay away from ICS as there are no stable versions available at the moment.
Depends on what you mean by stable.
It is pretty stable now, but not full featured yet.
i need help
i want to install ICS on My P1000
it is having original 2.2 Froyo
please help me
this is the first time i m doing it and i have got my tab only 4 days ago
ics p1000
Last night I installed a CM9 ICS BUILD from a humberos kernel site using it now everything works except camera but the from has a screenshot function so what I do is open the camera app and other take the screenshot and just crop it and booom I'm happy
Camera is fixed. If you don't know how to push changes, you should wait for a few more days to get new build that has fixes.
Sent from my GT-P1000 using XDA
crissza said:
Last night I installed a CM9 ICS BUILD from a humberos kernel site using it now everything works except camera but the from has a screenshot function so what I do is open the camera app and other take the screenshot and just crop it and booom I'm happy
Click to expand...
Click to collapse
Is there a CM9 ROM for the Tmobile Tab?
Wow cool.... I learned flashing yesterday only...
It is nice..
I have made custom firmwares of my own in symbian now android time
Sent from my GT-P1000 using xda premium
Miui 4 ICS for galaxy tab looks HOTTTT, and however I can't get nether my sim card to work nor wifi. Can anyone be a Saint and guide this newbie on the right path..???
Sent from my GT-P1000 using xda premium
which MIUI?
[ROM][GSM][ALPHA]MIUI ICS 2.1.6 Based on CM9 ??
If this is the one, well, it is an alpha ROM. So don't expect too much.
And hasn't been updated since Jan 2012.
The dev said don't use it as a daily rom.
That truly burst my bubble, cause once I downloaded it I feel in love with the way the entire interface looked and felt. All I can say is the development had something cooking there, I wish he would have maxed it out. It could have been really one of the best kernels out.. Just my option. Thanks for the feedback, I truly appreciate all of you that help us non knowing newbies out.. And I say that from the heart. Is there anything that comes close to it out..?? I'm using CM9'S build #31, it's good but the fonts are small and I miss the notification page that sides down. Can you please be kind enuff (not saying you haven't thus far) to put me one to the HOTTEST build out, we'll which ever you think is the best out for daily use for my GT-P1000. Thanks again, and muck blessings to you and yours.
Sent from my GT-P1000 using xda premium
This is the best ICS ROM for this device as fas as I'm concerned. Works really well. A couple of minor bugs but overall it flies.
http://forum.xda-developers.com/showthread.php?t=1523174
I searched the link you suggested, however I didn't see my device listed (GT - P1000). Is there a direct link you can send me to it'll be greatly appreciated. And what is ice Aokp..??
Sent from my GT-P1000 using xda premium
I'm really not sure what you mean. The link I posted takes you the ICS ROM for P1000 device.
May be I'm misunderstanding your question.
Hi luchiano,
If you are on cm9, there isn't a build 31.
That is ICS AOKP that has that build number.
You won't have slides down transparent notification like in gingerbread, sorry can't help there.
But font size can be increased easily in settings- display-font size.
Sent from my GT-P1000 using XDA
Cool, will I would like to start off by thanking you both Priyana and ipit, known to get a little clear I'm going to put up the spec that shows up on my about tablet section "kernel version -2. 6.35.7 sgt7-ics-TE4M #20120410 CAYANOGENMOD VERSION BUILD # CM9-SGT7 TE4M_20120410. @ Priyana, I was almost sure when I downloaded the version I seen build #31, however I could be wrong. Can you please do me the favor and send me a link to what ever version your on..?? It would be highly appreciated. Thanks again to you both.
Sent from my GT-P1000 using xda premium
ICS!
I think the best ICS rom is AOKP,the rom is in beta testing now
http://forum.xda-developers.com/showthread.php?t=1523174&highlight=wifi
hi guys just realized that my sgs cannot rotate when I turn auto rotate on im currently on aokp android 4
the problem is how do I calibrate it properly? fried a couple of reflash with full wipes via cwm and via odin.
im anxious and really getting annoyed. read a couple of posts but I beleive those are for touchwized roms eg 2.2-2.3
I wonder please help anyone?
Sent from my GT-I9000 using xda premium
I had the same problem.
I went back to GB, calibrated the sensor and flashed ics again without wipe and it worked perfectly
Will try. Got no PC atm thanks
Sent from my GT-I9000 using xda premium
Hey..
ok so I've noticed that right after I started using my Note with the Ultimate Rom installed, the wifi connection has become both weaker in signal perception, and MARKEDLY slower than it was before I did the upgrade, and much slower than other devices connected to the same wifi.
I must point out that I have not noticed any negative change in the 3G/H+ connection. That is working just fine.
Has anybody else faced this problem? and can anyone help me with a solution or an idea?
Thanks..
Ultimate Fan too
Am on XXLSC V5.1 and i cant find this problem with WI-FI.
But sometimes Wi-Fi cant connect and i need to turn it off and then on again.
Well i dont know what wrongs with your note...
not to me
Im using this ROM also on my n7000 but everything works just fine..
Re: [Q] [ROM][4.1.2 JB]Ultimate N7000 XXLSC JellyBean 4.1.2 v5.1 wifi problem
Hi I'm using the same rom and my WiFi is perfect which kernel did you install it with you should use Philz cwm6 if you used this kernel try to reflash the kernel but make sure or backed up delet catch and delvik as well should be fine
Sent from my GT-N7000 using xda premium
Hack Xda said:
Hi I'm using the same rom and my WiFi is perfect which kernel did you install it with you should use Philz cwm6 if you used this kernel try to reflash the kernel but make sure or backed up delet catch and delvik as well should be fine
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I have used this ROM for quite sometime now, but have not faced anything like this.
Sorry - hope you ve fixed this already!
Thank you all for replying..
I just reflashed the whole rom once again clean and connections seem to work perfectly now
Hi guy..i am using this rom too.but the (updateme OTA) is not working..can help
Sent from my GT-N7000 using xda app-developers app
Hello everyone i have Samsung Galaxy Tab P1000 and i update android version from 2.2 to 2.3.3. I want to install 2.2 version because i have troubles with version 2.3.3. I looked on the internet but do not know which version to download.
Umm why would you want to go back to 2.2? Not many apps quite support froyo nowadays. You could go to www.samfirmware.com and find the latest 2.3.6 gb over there. Best one yet is the Hong Kong one.
Sent from my GT-P1000 using xda app-developers app
The smallest problem is the applications on Froyo.Tab works slowly and therefore I want to go back to an older version because less RAM is occupied and tab works better.
In Linux/android, RAM unused is ram wasted.
Not like Windows.
Sent from my GT-P1000 using xda app-developers app
A few days ago he worked with a small deceleration and today is too slow if you can not send me version 2.2. Tell me which version i install that tab will function normally.
The version in my signature. Overcome Series 7.
It is a GB 2.3.6 Samsung based but tweaked to run faster.
Follow the link in my signature and download the guide.
Sent from my GT-P1000 using xda app-developers app
Is there any possibility that I install this rom on version 2.3.3 and what will change as I install it?
You need to completely wipe.
Overcome feels like stock ROM, especially with stock theme patch.
But under the hood it is much more.
Sent from my GT-P1000 using xda app-developers app
bisharat said:
Umm why would you want to go back to 2.2? Not many apps quite support froyo nowadays. You could go to www.samfirmware.com and find the latest 2.3.6 gb over there. Best one yet is the Hong Kong one.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
How this is used? Flash using CWM Recovery or using something else? thnx
All stock ROMs at samfirmware are to be flashed using Odin by putting the tar.md5 in the PDA field.
Sent from my GT-P1000 using xda app-developers app