Help - One (M7) Q&A, Help & Troubleshooting

I am having trouble with phone calls. Whenever I am in an area or using wifi calling, my phone doesn't dial properly yet my contacts can receive a phone call like normal, in other words, it is a weird way how things dial and then my phone sounds like the speaker is on when it's not and then when I turn it on, the speaker sounds lower than when it was off. Help please?

Related

BUG: When receiving calls...

Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Frontline said:
Hi,
Ok, i tried ringing my kaiser from another phone and realise that the kaiser only actually starts ringing/vibrating and notifying of an incoming call ONLY after 2 rings from the phone making the call.
This has an overall effect on me knowing if i am going to get calls, missed calls and calls diverting to voicemail after 6 rings...
Can someone confirm they get the same problem...
F
Click to expand...
Click to collapse
Can't duplicate the problem here! It rings on the very first ring.
Hi
If the phone is in standby (it's normal state after a couple of minutes) then it will take about a ring or 2 for it turn on and sound the notification. This seems normal for all pocket PC phones. SmartPhone's behave more like normal mobiles and ring quicker as they are always on and don't have a standby mode like pocket PCs.
Having a ring tone on the storage card can also slow things down so make sure your ring tones are in the devices memory.
Regards
Phil
Same problem here.
If my phone in sleep/ON mode the incoming call will forward to voicemail.
Outbound call always work.
If I power cycle the phone, incoming call will work.
I think something not sync between the phone and the ATT network.
So ATT think my phone is offline.

Diamond fault

Anyone else had anything like this:
When the phone first boots up its perfectly fine, calls work both ways, it plays music no problem.
However leave it sitting on the side for 15-20 mins and then get a call, the phone receives it but makes no noise, answer call an the phone doesnt even sound like its picked it up it's just silent, can' hear person, they can't hear you. Same on outbound calls the phone is just dead i cant hear anything an receiver cant hear me. But the phone does no the call is connected as it rumbles when the person answers but i never hear the ringing before that.
Also once it is in this state, got to music on the phone and click play and there is no sound at all!
This has happened even after updating to newer official rom as well.
Any ideas???
Many Thanks
I am having exactly the same problem.... All sound from the phone just stops working, also the alarm, which means I can never trust my phone to wake me up in the mornings!
Another problem with the phone is that when the phone is called it takes a while for the phone to ring. I have tried to call my phone from a landline and it actually rings three times before the diamond makes a noise!
The latest Tweak 2k2 software solves the 3s ring delay problem...
Do you have a link for this?
Thanks
http://www.tweaks2k2.com/
Some users here were also tweaking the registry, but i solved the problem this kind of way...

Please help me with sound

My samsung captivate is having sound issues.
When i am talking on a speaker phone, after 2-3 min. i cant hear any voice on the speaker, i have to turn off the speaker and talk. And some times when someone calls, the phone doesn't rings. it just show the incomming call( the phone is not in a silent mode). And even when i play any music, it plays for some time and later its just silent.
If the speaker of the phone is bad, i should be bad all the time.
if it is a software problem, i update the software regularly.
can any one please let me know what should i do. i will be very thankful to you
Try firmly pressing down on the speaker housing. It may just be a loose connection.

MOD PLEASE DELETE incoming ring cuts off

I'll be darn if I can figure out what is going on here.
4.1.2, stock except for custom kernel brick bug prevention.
I've had this rom running since it was released (this is a note international, GBT via amazon, used in the states)
Never had an issue, but I've started to notice a couple missed calls. Today, I saw what was happening.
Incoming calls, the ringer only rings for maybe 1/2 second, phone continues to "ring" but you never hear
anything! It's like it has been silenced as if you quickly pressed a button. That's how it acts without bluetooth.
If I have my bluetooth (jawbone ERA) turned on, SOMETIMES, if the screen is off, it NEVER rings, on the speakerphone
I'm using to dial my Note, I hear it ring 2 times, then go directly to voicemail. Sometimes it does that, sometimes it does
not, otherwise, the phone ringtone plays for a split second, headset continues to ring normally. Screen shows the incoming
call, but no ringtone. I haven't tweaked, installed, updated anything to cause this. Just one day it started doing it.
I'm about to do a clear reset, but it's just a PITA to set it up. Device is going on 18 months old, first issue I've really had
with it other than a bad USB port or a worn battery.
Any clues?
edit: Found the issue...I use call control as a phone number blocker. In settings, I had on for blocked calls, "remove partial ring" turned on. Once that was turned off, everything started working.

Question WhatsApp Audio/Video call silences the device

I have been using Pixel 7 for a few months now and am facing this issue since the day I have got this device. I am not sure what is causing this issue. I tried going through all the settings, developer options, custom rules, notification settings for Whatsapp but couldn't find anything.
THE ISSUE - The device works perfectly fine when I get a normal phone call, which means it rings if the phone is on ring mode when I receive a normal call. Where as for a whatsapp call (Audio/Video), even if the phone is on ring mode, it rings for a second and then immediately switches to silent mode. This means if I get a call over WhatsApp, then after that my phone will remain silent until I manually turn it back to ring mode by clicking on volume button and changing the setting. AI have to do this every single time when I get a WhatsApp call so that I don't miss out my next normal call.
I tried uninstalling the beta version, but it behaves the same way for the regular whatsapp as well. I would appreciate if anyone here could help me with this issue which has become a pain now.

Categories

Resources