Require help to revive my bricked Samsung 8.9 3G. Any assistance/advice would be greatly appreciated. Background
of issue faced are as follows:
Attempted factory reset failed. Ended up in Kernel Panic Upload Mode. Unable to startup, unable to shutdown.
Booted into download mode, flashed stock 4.0.4 ROM (obtained within forum from omarainea) with Odin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7300XXLQJ_P7300XFVLP4_P7300XXLQ6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.md5
<ID:0/003> hidden.img.md5
<ID:0/003> modem.bin.md5
<ID:0/003> recovery.img.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Process completes but tablet is stuck at boot animation of Samsung logo.
Performed power on/off to find error screen stating "Power Reset or Unknown Upload Mode". Once again unable
to start up or shutdown.
I would try flashing a custom recovery with ODIN, and using that to flash a custom rom.
upconvert said:
I would try flashing a custom recovery with ODIN, and using that to flash a custom rom.
Click to expand...
Click to collapse
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Downloaded recovery.img from CWM website. Applied conversion tool found in forum :
http://forum.xda-developers.com/showthread.php?t=2281287
Proceeded to flash with Odin, only to be met with failure.
Am I doing something wrong?
Also, I read somewhere that bootloader has to be unlocked for Odin to be able to flash recovery. Could that possibly be the issue and if
so how do I unlock the bootloader on this device?
tangene said:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Downloaded recovery.img from CWM website. Applied conversion tool found in forum :
http://forum.xda-developers.com/showthread.php?t=2281287
Proceeded to flash with Odin, only to be met with failure.
Am I doing something wrong?
Also, I read somewhere that bootloader has to be unlocked for Odin to be able to flash recovery. Could that possibly be the issue and if
so how do I unlock the bootloader on this device?
Click to expand...
Click to collapse
Try it with the .tar from the stickies in the android development forum.
Attempted to flash ClockworkMod Recovery v5.5.0.4 found in http://forum.xda-developers.com/showthread.php?t=1312218
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Tablet then reboots directly to download mode. Unable to enter newly installed recovery, unable to shutdown.
Retried several times to same result.
Are you doing the right key combo to get to recovery? Restart tab, as soon as the 8.9 logo pops up, press and hold volume down (the one closer to the power button). When bootloader screen comes up press volume down one more time to select recovery, and volume up once to select. Sorry if this is obvious, just wanted to make sure.
Correct me if I'm wrong but power+vol down basically brings you to a screen where you're given a choice
between download mode (denoted by a blinking green Andy) and recovery mode (Andy coming out of a box).
I select recovery, tried all buttons, no response. The "icon" flashes for a moment when key is pressed but
nothing happens.
That's correct. It sounds like your bootlader might be borked. Unfortunately, idk how to flash a new one without a working recovery. Sorry.
You might be able to flash a bootloader.zip in odin as a pda. I have never tried this, and I have no idea if it will work, or if it will further break your tab.
Am I correct that you have a p7300? If it is a p7300 or a p7310, this is the right bootloader:
http://forum.xda-developers.com/showpost.php?p=32802991&postcount=1085
upconvert said:
That's correct. It sounds like your bootlader might be borked. Unfortunately, idk how to flash a new one without a working recovery. Sorry.
You might be able to flash a bootloader.zip in odin as a pda. I have never tried this, and I have no idea if it will work, or if it will further break your tab.
Am I correct that you have a p7300? If it is a p7300 or a p7310, this is the right bootloader:
http://forum.xda-developers.com/showpost.php?p=32802991&postcount=1085
Click to expand...
Click to collapse
I read some replies about flashing this bootloader, and it seems like it works
but I noticed that @kallt_kaffe mentioned that you should flash the bootloader using the bootloader option instead of the PDA:
kallt_kaffe said:
Unzip and flash with Odin (using the Bootloader option instead of the PDA option that you use when you flash a full rom)
Click to expand...
Click to collapse
so I'am not sure but I think you should try to use the bootloader option first
good luck
Thanks for all the help I've gotten from both of you, I've managed to get CWM to work on my tab.
Now what? How exactly would I fix my problem using CWM from this point forward and what files would I need to do so?
tangene said:
Thanks for all the help I've gotten from both of you, I've managed to get CWM to work on my tab.
Now what? How exactly would I fix my problem using CWM from this point forward and what files would I need to do so?
Click to expand...
Click to collapse
Flashing the bootloader was the solution ???
I can think of two things
ether you should try to flash a stock Tar ROM by Odin
or you should transfer any flashable Zip ROM by USB adb connection and flash it through CWM
omarainea said:
Flashing the bootloader was the solution ???
I can think of two things
ether you should try to flash a stock Tar ROM by Odin
or you should transfer any flashable Zip ROM by USB adb connection and flash it through CWM
Click to expand...
Click to collapse
Actually I'm not sure whether it's the bootloader OR the fact that I switched to a laptop and a different USB from the one I was
using before.
That said, I have tried flashing the ROM you gave me the link to in mail. Didn't work. As before the installation completed only to be stuck at
the Samsung logo upon reboot.
How would I proceed with the flashable zip ROM USB adb thing with CWM? And what files would I need? Pardon my ignorance but I'm just
pretty new to all this.
You need to use cwm to flash a custom rom. There are several in the android development section. You need to download the rom.zip and gapps.zip from one of those threads, and put them on the internal storage of your tab. Hopefully, when you hook it up to a pc it will pop up as a media player or storage device, and you can just drag and drop them on there. If not, you may need to set up adb and push the files over to the tab.
Once you get the files on there, normally one would do a nandroid backup. In your case, without a working rom, I don't think that will be usefull. You need to wipe (format) system, data, cache, and dalvik, then install the rom.zip, then the gapps.zip.
I am having similar issues with my tab, flashed an official rom from sam mobile through odin, just hangs on the samsung boot screen. Could it be a boot loader issue?
upconvert said:
You need to use cwm to flash a custom rom. There are several in the android development section. You need to download the rom.zip and gapps.zip from one of those threads, and put them on the internal storage of your tab. Hopefully, when you hook it up to a pc it will pop up as a media player or storage device, and you can just drag and drop them on there. If not, you may need to set up adb and push the files over to the tab.
Once you get the files on there, normally one would do a nandroid backup. In your case, without a working rom, I don't think that will be usefull. You need to wipe (format) system, data, cache, and dalvik, then install the rom.zip, then the gapps.zip.
Click to expand...
Click to collapse
Device doesn't register as a storage device. No idea how to push files over with ADB or even how I would access ADB with
the Samsung 8.9. Could someone take the trouble to give me some step-by-step idiot proof instruction I could follow?
Ok, sorry for being late, I was collecting information and doing some experiences
on my tab to get all the details you need
So, to transfer a file through adb USB connection while in recovery you should
Install ADB Drivers and use the ADBGUI to copy the files to the tab
First of all mount /sdcard from the mount and unmount section in CWM, connect your tab through USB cable while in CWM and then
when you open the ADBGUI tool it should automatically detect your tab and show you figures like number 1 in the screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you see any figures in the same place, then your device is connected through adb
now open the Basic Commands tab (number 2)
Select File and browse it to the ROM.Zip you want to flash (number 3)
[it is recommended to be small file cuz you might need to do this more than once]
I use for this matter a Stripped CM9 (67MB) just to boot and then I transfer through normal USB any ROM I want
write (/sdcard) in (number 4) to guide the tool to put the file on the sdcard
click Push File (number 5) and wait for 2 - 6 minutes [it depends on the size of the file]
now the file should be on your sdcard
just flash it and reboot
I hope I am not exaggerating in this guide
Hey All,
Just managed to get mine to stock! . I was having the issue of it hanging on the Samsung Boot screen, but I managed to fix this by, flashing CWM through odin AFTER flashing the stock rom. Then entering CWM and doing a factory reset/wipe and wiping dalvik cache. Tablet booted perfectly into stock 4.04! Now just need to flash stock recovery and everything is back to stock
TwinCalibre said:
Hey All,
Just managed to get mine to stock! . I was having the issue of it hanging on the Samsung Boot screen, but I managed to fix this by, flashing CWM through odin AFTER flashing the stock rom. Then entering CWM and doing a factory reset/wipe and wiping dalvik cache. Tablet booted perfectly into stock 4.04! Now just need to flash stock recovery and everything is back to stock
Click to expand...
Click to collapse
That was easy,,,,
I created This Zip from the last Stock Framewok
you just need to flash it through CWM
Note: this is a stock kernel so you if you install it you won't be able to flash anything anymore
but you'll still be able to enter it and do wipe data and cache only
Enjoy
Thankyou!!! Ill flash it now and report back
---------- Post added at 06:23 PM ---------- Previous post was at 06:18 PM ----------
omarainea said:
That was easy,,,,
I created This Zip from the last Stock Framewok
you just need to flash it through CWM
Note: this is a stock kernel so you if you install it you won't be able to flash anything anymore
but you'll still be able to enter it and do wipe data and cache only
Enjoy
Click to expand...
Click to collapse
Works absolutely perfectly! Thank you so much for your help! This is going on Ebay now
There doesn't seem to be an option in CWM mount/storage for me to mount /sdcard. Options available for selection:
mount /efs
mount /system
unmount /cache
mount /data
mount /preload
format /system
format /data
format /preload
ADB Drivers and GUI installed though.
Related
I know that this is probably another post in a series of desperate to get back to ICS for GB, but please understand me, I did not want to get my phone is a brick
I used the CheckROM NoteHD ™ V6. I tried to go to Criskelo LPY V3's ICS ICS. I restarted my phone into recovery and I flash: AbyssNotekernel42RedTouchCustomLogo.zip
Then I reboot and recovery (the recovery RedTouch) I did factory reset, wipe and wipe cahce Dalvik cache and then and flash Criskelo LPY V3's ICS ICS. When the flash ended (I did not have any information about errors) successfully I restarted my phone. My phone Restarted a few times and finally started to Criskelo's ICS ICS LPY V3.
But I wanted to return to the previous rom. Perhaps I did wrong, but I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip (I thought that this way I can upload my copy of the rom GB) .... but after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3
Just notice another problem, not sure if it is when I tried binary updating SU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screen was made by another user, but for me it is exactly the same.
Everything indicates that I have root - titanium works and I can copy and delete any file in the system
Now the question:
How should I go back to GB (whether it is better not to do it?). Please help me what should I do step by step?
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Sent from my GT-N7000 using Tapatalk 2
sotiris20 said:
Don't panic mate!
Go into Recovery
Flash abyss 4.2 or Franco 10
FULL WIPE (factory reset,cache,davnik cache)
Restore backup or even better Flash a clean GB ROM
Edit: of course you can use PC Odin in download mode and flash a pre-rooted GB From.
Click to expand...
Click to collapse
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
Its not the "wrong way".Flash a clean Rom now,not your backup. Maybe your backup file is corrupted. If you want try Pc-Odin as I said before. Your choice...
Anyway, hope you'll figure it out.
Sent from my GT-N7000 using Tapatalk 2
OK I trust you
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/showthread.php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6
kamilloo83 said:
thanks man,
but if I restarted my phone into recovery and I tried to flash again: AbyssNotekernel42RedTouchCustomLogo.zip after the approval of the progress bar stops, and after about two minutes, the phone reboots again it's ICS ICS Criskelo LPY V3.... maybe it is wrong way
Click to expand...
Click to collapse
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
abhisahara said:
After flashing the AbyssNotekernel42RedTouchCustomLogo.zip you rebooting the phone or rebooting the recovery ?
Click to expand...
Click to collapse
not because the flash: AbyssNotekernel42RedTouchCustomLogo.zip is not succesfully -> my phone freezes during this operation, and then restarts
addition, one user wrote:
Entropy512 said:
Don't flash a GB kernel from recovery! Odin/Heimdall it! If you are unable to flash kernels with Odin/Heimdall, you may be suffering from eMMC damage.
Click to expand...
Click to collapse
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
chasmodo said:
I sincerely fear you may have the dreaded Superbrick mate. All the symptoms are there.
Click to expand...
Click to collapse
I am afraid that most
What do you think should I do to try to flash with the hope of GB?
andreww88 said:
He can still ODIN, right? I haven't read where he said he can't access download mode. He was just trying to do stuff in recovery. Can we confirm you can not access download mode either?
Click to expand...
Click to collapse
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
kamilloo83 said:
you're right, I have not written anywhere that I can not enter download mode .. but have not tried ... charge the phone at the moment - in the evening I'll be ready ....
or should I do as I wrote above - this example ROM, and my description is OK?
Click to expand...
Click to collapse
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
andreww88 said:
Okay cool, that's fairly good news because if you CAN enter download mode you are not bricked and you can ODIN a pre-rooted GB rom or a stock GB rom. If your phone will charge, let it charge up and then ODIN away.
Click to expand...
Click to collapse
ufff... I hope...
ask again:
Will it be ok as I flash in PC ODIN from:
http://forum.xda-developers.com/show....php?t=1424997
it:
Older ROMs (Directly Rootable)
N7000XXKKA ------ 2.3.6 2011 November------- N7000PLSKK1 -----------------Poland (PLUS) ----------------------- Download
and next I'll be root, and I will be able to upload the recovery CheckROM NoteHD ™ V6 ??? ....
Yes, that is thread you need to follow.
You can root by following Dr.Ketan's steps too.
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
kamilloo83 said:
OPERATION FAIL:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
WHAT IS WRONG?
Click to expand...
Click to collapse
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
andreww88 said:
Not sure. Can you try another ROM file on that thread? That doesn't look promising, but maybe someone else can help that knows more.
Click to expand...
Click to collapse
I must download anotheher ROM... one moment...
kamilloo83 said:
I must download anotheher ROM... one moment...
Click to expand...
Click to collapse
Maybe even try LPF ICS?
It might just have been a bad download, but the MD5 checked good it looks like so I don't know. I'd like someone else to say something to try to help.
Try repartitioning the device. To do so use simply set the right pit file in odin.
rupalazzi said:
Try repartitioning the device. To do so use simply set the right pit file in odin.
Click to expand...
Click to collapse
can I use it with ROM: N7000XXKKA_N7000OXXKK6_N7000XXKK5_HOME.tar.md5
together in PC ODIN?
Hi Everyone
VIDEO:
https://www.youtube.com/watch?v=94vIeinaddQ
i will show you how to root the Samsung galaxy mini 2 S6500D
and i will move step by step in this tut as i will Root my device as well, I've Unrooted it so i can show you every step
ok, so first of all there is some files that you need to download first:
1- you must have the ADB drivers for your phone and you do that by downloading Samsung kies
just google it and you will find it
2- download this rar file here
Ok so lets get started
- After Downloading Samsung Kies connect your Phone to the pc so the Kies can detect it and install its drivers.
- grab your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
( its really advisable to be fully charged, or at least 90% or so ) things can get really bad if the phone turns off while rooting :silly:
- Trun off the phone,Boot your phone in ( Download mode ) you can do that by pressing Vol (down) and Home and power key all at once, after that you should get to this screen:
just press the volume up to ignore the warning To proceed.
Then connect your phone to the pc and open Odin3 v1.85.exe from the rar(mini2.rar) that you downloaded and extracted
then press the PDA button and choose the other file called ( clockworkmod-5.0.2.8.tar.md5 )
ok, before we continue you should take care of something
if you get Exactly this screen, then you did something wrong
as you see in the rec circle Odin did NOT detect your phone
-its either not connected probably or its drivers is not installed
so make sure you check both of these things
now if you get THIS screen with Oding detecting your phone then you are ready to go
press the PDA button and load the file called ( clockworkmod-5.0.2.8.tar.md5 )
then press start,If you see pass with green background make sure you did it right
after that CLOSE, you must COLSE odin, just exit it.
Now turn off your phone again and boot it in ( REcovery mode ) you can do this by pressing both of the volume buttons and the home and power key, so basically you just press all the buttons at the same time.
as you see it will say GT7500 but its ok, :highfive:
You should get this screen
remember your phone is still connected to the pc the whole process
Now open the other file
AGAIN, if you get this kind of error ( device not found )
Then you you probably did the same thing and proceed without making sure of finishing the prev.step.
But if you did it correctly, you should see this:
it MIGHT (probably will) fail the first time, just exit and run the file again to make sure.
Then you are ready to go
now you will be automatically on the first option ( reboot system now ) just press the home key and the phone will reboot
open the app menu and you should see ( super user ) installed on your phone
to make sure you are rooted just go to the google store and search Titanum backup
install it and you will see it Require the super user request to proceed,
or you can just search for any root checker app as well
https://play.google.com/store/apps/details?id=burrows.apps.rootchecker
many thanks to the people who find out the way to root the phone :highfive:
i just LOOOVE to create Tutorials :good: :victory:
if you have any questions feel free to ask in the comments )
Good tutorial.
I'm glad that we have a dev forum for mini II. First stiky posts must be: how to root, how to install a custom ROM, how to go back to stock.
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
rhisendark said:
help! i rooted and then installed rom toolbox and now i accidentaly clicked reboot to recovery in rom toolbox. and now i always boot to recovery please help
Click to expand...
Click to collapse
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
joey_W said:
just flash back to stock rom via odin
you can find stock rom at sammobile.com
and remember its always best to make backup before installing roms.
Sent from my GT-S6500D using xda app-developers app
Click to expand...
Click to collapse
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
hayta77 said:
lol i did same thing nearly took nani back up with rom toolbox boot me to cwm to get back ups.. well it did good but it doesnt boot normaly to system after back up keep geting me in recovery mode and cant get in download mode to flash a firmware to fix it need help |! any advice, walktho... will be cool. thx..
--
i just took it in DL mode looks everything going good right now installing S6500XXLD2 to jump in peters mod.
--
had problem whil flashing XXLD2 odin gave error like this phone still at download mode and progress stop arond %95ish. now i need a serious help ..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S6500XXLD2_S6500XXLD2_S6500DBTLD2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img.ext4
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> fat.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
phone says in download mode Secure check fail : ID 0xc
--
phone still on at download mode stuck at loading screen with that secure check fail thingy.. i ll keep it up dont mess up any thing till someone gives a hand
Click to expand...
Click to collapse
My meant your problem from cable usb or port usb you pc try orther usb or orther pc.. CMIIW
Sory for my bad english
Sent from my GT-S6500D using xda app-developers app
..
It's working great
But how to revert back to original recovery??
Just flash a stock rom.
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2
Thanks for this great tutorial :laugh:
I've made a Video
S6500L
Hello am asking around with no answers but whats the difference with the S6500L and the other models and will this rooting process and the other roms work on it? Thanks in advance
Thx for the TUT, 2 quick question.
Do you have a list with apps can uninstalled safe?, or know the link in the forum with this info?
It will increase the bin counter(number) after installing CWM and rooting?
nikobadboy said:
It will increase the bin counter(number) after installing CWM and rooting?
Click to expand...
Click to collapse
yes after installing CWM using odin
Thanks , this vid help me a lot couse this is my first android phone
Sent from my GT-S6500D using xda app-developers app
I cant find Odin3 v1.85.exe in mini2 rar are (clockworkmod-5.0.2.8.tar.md5 and RootMe) and in Root me are (run me and a folder named "files")
Ok I google it and I downloadit!
Now I can not boot in Recovery mode, I try and try but it boots normaly and not in Recovery.
And again I din't disconect my USB cable before I try to boot in Recovery, so it didn't, but with the cable disconectid it was all good and now my phone is root.
Everyone please see the video.
THANX MAN!!!
nice work
Sent from my Optimus Net using xda app-developers app
How to Unroot ?
Hi , it is great rooting tutorial so thanks
But i really want to know how did you unroot your phone
Because my friend want to it with his phone so pleas help
thx m8 good tutorial for first time users. :good::highfive:
Regards
MB from Holland
Hi All,
I've managed to break my phone and need some helps.
Background info:
I own a Samsung GT-i9305 which I purchased from Optus (Australian carrier) a few months ago. When I first got the phone I installed CF root, TWRP and a custom rom (illusion_i9305-2.6.stable-OFFICIAL). Everything was fine and dandy until a few days ago when the phone started randomly restarting every time I pressed the power/lock button. After researching the issue I found that the power button was simply stuck and only needed a light tap to fix the issue, (This is were Sh!t hit the fan) However because of my ignorance and lack of knowledge I automatically assumed it was the custom rom, so I began flashing everything until my phone was no longer functional. (My flash counter is 14 currently)
Issue: My phone no longer boots a ROM and have had some weird errors within TWRP that don't make sense to me (hoping someone with more knowledge than I can assist)
Errors:
Unable to mount system (when installing a rom, please note: this has only occurred twice and seems to be intermittent)
Work done to device: (using Odin v03.7)
Multiple flashes of CF root
Multiple flashes of TWRP & CWM
Multiple attempts at installing custom .zip Roms within TWRP (I prefer TWRP over CWM)
- You get the basic idea, frantically flashing everything to try and fix the issue. -
Current issue:
I've currently got TWRP 2.6.3.0 on the phone but when I install a custom ROM it doesn't boot, only stays on the loading screen.
NOTE: I performed a full wipe on the phone and a full wipe after installing the custom ROM but it still wont boot
ROM: illusion_i9305-2.6.stable-OFFICIAL (only because it worked)
I've tried to include all the information I can however if you need more info just ask. I'm looking for a way to either reset my phone to the stock ROM (with a download link, as the ones i've tried are horribly slow) or an alternative way to fix my issue. Clear instructions are much appreciated.
EDIT:
- I have downloaded "I9305XXBMA5_I9305OPSBMA1_OPS.zip" and extracted the .tar.md5
- I received the below error when trying to flash the stock Optus image to the device
ODIN LOG:
<OSM> Please wait..
<OSM> I9305XXBMA5_I9305OPSBMA1_I9305XXBLL5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> __Xmit Write fail
<ID:0/006> XmitData Fail..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
RESOLVED!
Solution:
Flash Stock ROM I9305XXALI5_I9305OPSALI5_OPS (Optus Aus ROM 4.1.2)
Changing to an earlier firmware version resolved all issues. This thread can now be closed.
NL3 is released.
NOTE: This image is *NOT* rooted! If you need root, see here.
WARNING: Stop asking if you can flash this on other phones. You can NOT. It is meant for the I9505G ONLY. This is NOT a "rom". This is a system image for the I9505G. Flashing to any other phone will brick it.
Kernel Source:
http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-I9505G
OTA zip (must be sideloaded in stock recovery):
http://android.clients.google.com/p...USER_I9505G_XAR_UCNF3_to_UDNL3_Update_FWD.zip
ODIN FULL RECOVER IMAGE (root is NOT built in):
Shamelessly stealing @MJHawaii instructions from this thread (THANK YOU):
http://forum.xda-developers.com/showthread.php?t=2398217
(DISCLAIMER) Please read and follow the instructions carefully. I nor anyone else on this forum is responsible if you brick your phone, lose your job, or life as you know it ends. Make sure you fully Understand what you're doing before you do it. Modifying any phone comes with a risk.
INSTRUCTIONS:
WARNING: Please do not flash this if you're low on battery...go charge your phone!
o) Download the I9505GUEUDxxx_FULL.tar.md5.gz package from below
o) Make sure you have the USB Drivers installed and you have Odin 3.09 from below
o) Put your phone in download mode and connect it to USB:
-Disconnect the phone from USB
-Power OFF your phone
-Hold Volume Down, Home, and Power
-When the "WARNING!!!" screen comes up, release the buttons
-Volume up to enter download mode
-Connect the phone to USB
o) Open Odin
o) Click on AP, then select the I9505GUEUDxxx_FULL.tar.md5.gz package you downloaded
o) Odin will extract the tar md5 file from the gzip archive, and this will take a while...be patient
o) Once the tar md5 is loaded, make sure you have a COM PORT in Odin ( any )
o) Click Start and wait till it finishes flashing...your phone should reboot when it's done
NOTE: If your phone does not boot, then boot into stock recovery and Wipe Data Factory Reset.
DOWNLOADS:
ODIN 3.09
I9505GUEUDNL3_FULL
A GIANT thank you to @MJHawaii for helping me learn this process!!!
Thank you for this. This has been a very much needed update IMO. Your work is always appreciated here. Whether or not the odin image is rooted, it is an easy fix for sure. Once again thank you. And enjoy the fresh Lolli.
I specifically decided not to use a rooted image this time due to the fact that being rooted blew up the ota for me. I wanted a place to start from that was clean. I figure our first 5.x update was a good place to kick out a new, fresh baseline build.
SamuriHL said:
I specifically decided not to use a rooted image this time due to the fact that being rooted blew up the ota for me. I wanted a place to start from that was clean. I figure our first 5.x update was a good place to kick out a new, fresh baseline build.
Click to expand...
Click to collapse
Good choice, in my opinion.
jpculp said:
Good choice, in my opinion.
Click to expand...
Click to collapse
I second (or 3rding) that .
For the first time ever i'm going to use Stock img with no root and happy about that
How to install a firmware i9505G GPE in an international I9505?
opoeta said:
How to install a firmware i9505G GPE in an international I9505?
Click to expand...
Click to collapse
You read the big red warning at the top of the post!
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
I just installed this and so far everything is working great. One small thing is confusing me though. I can't seem to find the settings for the Home button. When I push it nothing happens, unless I hold it down and then I get the app switcher. I feel really dumb right now. Lol
_DrizeX_ said:
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
Click to expand...
Click to collapse
Read the OP
So, isnt a ROM
Im sorry
_DrizeX_ said:
I9505 and I9505G isnt the same device?
Same way as I9505 ROM works in a I9505G, should happen otherwhise (or no?)
Click to expand...
Click to collapse
This is NOT A ROM. Doesn't it SAY that in the OP? Does it not also say that it will brick any device OTHER than an i9505G? They are NOT the same device. They use completely different partition tables. Rom devs take that into account. Since this is not a rom, it will not take that into account.
_DrizeX_ said:
So, isnt a ROM
Im sorry
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2557353
Thanks for this
Attempted to flash the I9505GUEUDNL3_FULL.tar.md5 image and it failed. Here is the Odin message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I am soft bricked. I can successfully flash a stock recovery and get into recovery but that's it. Odin flashing any full image fails at the same spot.
Any tips or help would be greatly appreciated!
P.S. I can flash a stock recovery but attempting to flash a modem fails at the same spot. Confused.
Best regards,
Derek
What rom are you coming from?
Latest Stock 4.4.4 Rooted (I think NF3 but can't tell since I can't start up )
Just installed this last night on my stock S4 GPE. Working flawlessly and the phone feels a lot snappier than with 4.4.4. Lollipop is such a nice update.
Not exactly a problem, but I notice that the stock Android Messenger (SMS/Text) app is gone and that it's now Hangouts that by default handles texts/SMS. I find no separate stock texting app installed, unlike on my Nexus 6 with Lollipop.
DerekChas said:
Attempted to flash the I9505GUEUDNL3_FULL.tar.md5 image and it failed. Here is the Odin message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I am soft bricked. I can successfully flash a stock recovery and get into recovery but that's it. Odin flashing any full image fails at the same spot.
Any tips or help would be greatly appreciated!
P.S. I can flash a stock recovery but attempting to flash a modem fails at the same spot. Confused.
Best regards,
Derek
Click to expand...
Click to collapse
Try a different USB cable and./or USB port. See if that makes any difference.
People have been asking about root quite a bit. I put together a new tool for those that aren't sure how to install it on a phone like this.
DOWNLOADS:
GPE Root
https://www.clockworkmod.com/rommanager (Use the i9505 NON touch version for rooting)
http://download.chainfire.eu/supersu
INSTALL:
o) Create a C:\GPE-Root folder
o) Unzip GPE-Root.zip to the C:\GPE-Root folder. NOTE: If you do not follow directions, then do NOT have spaces in the path you choose to use or it WILL fail.
o) Copy the CWM recovery img file to the C:\GPE-Root\recovery folder
o) Copy the SuperSU zip file to the C:\GPE-Root\supersu folder
USAGE:
o) Run the run.bat in the C:\GPE-Root folder
o) Follow instructions
NOTE: If your phone is not detected in ADB sideload mode, install the universal ADB diver in the C:\GPE-Root\ADB_USB folder
This is my first post so I'm sorry if I did not post this in the right place or didn't do something else regular-place to these forums. Please guide me in the right direction if I didn't. So I rooted my phone with Kinguser and then switched it to SuperSu pro using the in-app instructions ins SuperSu. My goal is to install Xposed onto my phone but part of the problem is that I have to boot and manual recovery with TWRP or something similar for Xposed to work on my S4 (specifications above). But every manual recovery app I download works up to the point I actually try to reboot. All of them can find my root access and say they install successfully, but when I hit reboot and recovery, it always goes into Odin mode (and in the top left corner of Odin mode it says cannot reboot normally). I can get out of Odin mode easily so the problem isn't that I'm stuck there. I just want to know how to proceed with reboot and recovery when every time I try it goes into Odin mode.
Christian.Kodele said:
This is my first post so I'm sorry if I did not post this in the right place or didn't do something else regular-place to these forums. Please guide me in the right direction if I didn't. So I rooted my phone with Kinguser and then switched it to SuperSu pro using the in-app instructions ins SuperSu. My goal is to install Xposed onto my phone but part of the problem is that I have to boot and manual recovery with TWRP or something similar for Xposed to work on my S4 (specifications above). But every manual recovery app I download works up to the point I actually try to reboot. All of them can find my root access and say they install successfully, but when I hit reboot and recovery, it always goes into Odin mode (and in the top left corner of Odin mode it says cannot reboot normally). I can get out of Odin mode easily so the problem isn't that I'm stuck there. I just want to know how to proceed with reboot and recovery when every time I try it goes into Odin mode.
Click to expand...
Click to collapse
Easiest way is to go into download mode(Odin mode) and flash TWRP via Odin. In Odin make sure to uncheck reboot and f. reset once TWRP is flash unplug and pull the battery and reboot directly to recovery (power & volume+) once you get into TWRP it'll stay after that. Then just reboot your phone normally. Also within TWRP you can flash SuperSU.
TWRP download:
https://dl.twrp.me/jfltespr/twrp-2.8.4.0-jfltespr.tar.html
Sent from my SPH-A120
mattzeller said:
Easiest way is to go into download mode(Odin mode) and flash TWRP via Odin. In Odin make sure to uncheck reboot and f. reset once TWRP is flash unplug and pull the battery and reboot directly to recovery (power & volume+) once you get into TWRP it'll stay after that. Then just reboot your phone normally. Also within TWRP you can flash SuperSU.
TWRP download:
https://dl.twrp.me/jfltespr/twrp-2.8.4.0-jfltespr.tar.html
Sent from my SPH-A120
Click to expand...
Click to collapse
Thanks for the response!! I found the twrp file on their website (one which is a .md5 and one which is a .img which both don't work). They would both just freeze in Odin. So I found a tool online that turns .img files to .tar file. Link to tool below
http://forum.xda-developers.com/showthread.php?t=2281287
with another thread that helped to fix the runme.bat file
http://forum.xda-developers.com/showthread.php?p=42511844#post42511844
and that helped make a .tar file which doesn't freeze up Odin, but when I run the .tar file made from that tool, the manual flash using Odin runs through and fails. the Odin prompt is shown below.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Anything I'm doing wrong so far??
Anything I'm doing wrong so far??
Click to expand...
Click to collapse
Pretty much everything. I would not trust converting files like that. High potential for bricking your device.
The link I gave you is a .tar file that Odin likes. The md5 is at the top, yes, but you need the tar file just a little further down.
I linked you the latest one that is .tar. Newer versions are in .img that can be flashed in recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-A120
mattzeller said:
Pretty much everything. I would not trust converting files like that. High potential for bricking your device.
The link I gave you is a .tar file that Odin likes. The md5 is at the top, yes, but you need the tar file just a little further down.
I linked you the latest one that is .tar. Newer versions are in .img that can be flashed in recovery.
Sent from my SPH-A120
Click to expand...
Click to collapse
I downloaded the .tar file you linked above and tried it and it still failed. So to be descriptive as possible the first thing I do is plug my phone (without twrp installed) into my pc. Then I turn it off. Then I try to reboot. Phone can't reboot and forwards directly to Odin mode. I download the .tar file you linked me above. I do not unzip the file. I have Odin3 v3.07 installed. I open Odin and uncheck Auto Reboot and F. Reset Time. I click on PDA and select the unzipped zip file for flash. Nothing is said in the message display after that and is still at.
<ID:0/005> Added!!
Then I click Start. Flash still fails and message displays
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Phone isn't bricked but it seems that the .tar file linked above isn't working as well. Is it my phone probably?? Samsung Galaxy S4 AT&T SGH-I337 5.0.1 Lollipop rooted with Kinguser and then switched over with SuperSu pro via in app instructions?
Christian.Kodele said:
I downloaded the .tar file you linked above and tried it and it still failed. So to be descriptive as possible the first thing I do is plug my phone (without twrp installed) into my pc. Then I turn it off. Then I try to reboot. Phone can't reboot and forwards directly to Odin mode. I download the .tar file you linked me above. I do not unzip the file. I have Odin3 v3.07 installed. I open Odin and uncheck Auto Reboot and F. Reset Time. I click on PDA and select the unzipped zip file for flash. Nothing is said in the message display after that and is still at.
<ID:0/005> Added!!
Then I click Start. Flash still fails and message displays
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Phone isn't bricked but it seems that the .tar file linked above isn't working as well. Is it my phone probably?? Samsung Galaxy S4 AT&T SGH-I337 5.0.1 Lollipop rooted with Kinguser and then switched over with SuperSu pro via in app instructions?
Click to expand...
Click to collapse
Jeez I'm an idiot, I thought you were on jfltespr not jflteatt, I believe you need to use the safestrap, check out this thread:
http://forum.xda-developers.com/showthread.php?t=2448925
Sent from my SPH-A120
mattzeller said:
Jeez I'm an idiot, I thought you were on jfltespr not jflteatt, I believe you need to use the safestrap, check out this thread:
http://forum.xda-developers.com/showthread.php?t=2448925
Sent from my SPH-A120
Click to expand...
Click to collapse
Thanks so much for all the help!! After that linked I found a bunch of conversations that helped. If you every help out with someone with the same specifications on their phone then I had there's not much I can say that can help as far as Lollipop goes. I could not find a way to get Xposed on my device as is. But if anyone really does want it, I found that if you find the right .PIT file and the stock ROM for a previous version of Android (I tried a few which all work, but I would suggest KitKat because why not) then you'll be able to do anything you want without all the heartache. After I used Odin to flash KitKat onto my device, I found that I didn't even need TWRP, Xposed installed quite nicely, and even though the layout doesn't look quite as nice as Lollipop, you can find a bunch of display modules in Xposed that fit the bill quite well.
All in all, Samsung Galaxy S4 AT&T SGH-I337 5.0.1 and want Xposed?? You're screwed. Flash KitKat.