The only LED I ever really noticed on my Hima was the blue one telling me BT was on or off. I know the device has a green, yellow and red LED on the opposite side that can either burn or flash, but don't ask me why. Neither do I know if the flashing rate of the blue LED might tell me something.
Last week when my battery was just about 99.9% drained and my Hima started to behave strange, I noticed that on external power the red LED burned constantly. And when I notice something like that, it's probably because I've never seen it before.
http://michael-channon.spaces.live...._c=BlogPart&partqs=cat=Hermes+Charging+Issues helped me out.
But I would love to know the exact meaning of all LED colours and blinking rates.
all the Leds's Rate are in the Book that comes with it
Thanks, but as I told before I bought 2 Hima's with broken screens years ago, under those conditions it's very rare to get anything but the dead device itself.
The service manual only tells me that a fast flashing yellow LED means battery is too warm (>35C) or too cold (<0C) to charge.
hmmz..u r rite..its unpredictable..any way i'll see what i can find
What I can see, it's blinking green on normal operation, lighting yellow on charging, blinking red on missed calls and lighting red on too low voltage...
Mine never blinks green. Lighting green tells me charging reached 100%.
Could blinking green mean GPRS or IR on?
Anyone ever seen blinking yellow?
I hope curiosity only kills cats ;-)
I guessed the lighting red :-(
Mine blinking green when it is in normal operation.
Yellow on charging
Red when there is misscall or message because I set to give LED sign
> Green for normal - with carrier signal operation and Fully charged while still plugged into wallsocket
> Yellow for Charging
> Red - missed calls/poor elec current while being charged/very low battery
@Maggy, there is a tweak on how to permanently disable blinking lite even during normal operation. could it be possible that ur units have are tweaked like such?
badbadtz.carlo said:
> @Maggy, there is a tweak on how to permanently disable blinking lite even during normal operation. could it be possible that ur units have are tweaked like such?
Click to expand...
Click to collapse
Not that I can remember, but I'm tweaking all the time. Aren't we all?
;-)
how come on my XDA my colors are
Yellow=Normal Operation
ORANGE=Charging
Red=Low batt
May be your led is expired Yellow and Orange is slighly different, you lose green color I think every body mentioned yellow in here is little bit mix with orange color
Or some of us are more colour blind than others
Hello
I've tried many roms on my HD, non showed the green led blinking on the ON/off button telling the device was on. Nor it was blinking red on notifications. At the end I thought it only showed the red light when charging.
Then, yesterday I upgraded the Hardsplwrapper and whenit finished I had a bautiful green led blinking in normal use.
After that, I have again triad other roms but none now shows the green light anymore.
There is a way to enable this feature? Why normally this light doesnt behave in the right way?
Thanks
Olaf
What do you mean by "right way" ??? In normal use the green LED is NOT blinking! It blinks only when there is an SMS/MMS/MAIL/Missed Call and so on. The Red one lights when charging and the Green lights when charge completed! None of them lights or blinks in normal use!
Ah, I thought that a green led blinking showed the phone was on and receiving signal, like in my old P3600. There it was a red blinking light that showed a notification.
But don't you think that a behaviour like my old phone would be better?
It would be usefull to see rapidly if the phone is on and receiving signal without pushing the on button.
Is there an application or registry mod to change the behaviour of the led?
Thanks
Olaf
My phone have never lost its signal or turned off by itdelf so I know it is turned on It conserves a little power that way not powering the let every few seconds. About the registry I don't know...
Hello all,
i dont know what happened, yesterday my phone died, batter was to low, tried to charge it at my car/usb, at my laptop/usb... to get it back on, but it died again really quick... hmmm
last night i let it charge fully, and this morning i took it out at about 9am
now its 13:30 and it dropped at 60%, and i only had one call on it for 3mins. The display was on standby in the rest of the time, used the auto setting from power saving menu.
the reason might be the damn green LED light which keeps blinking all the time, i have no message in the notification area, no missed calls/emails or anything.
i even removed from settings-> notification all the flashings for the different actions that where before set
the LED keeps blinking, and i dont know why. I tried also a soft reset (got battery out, and back on after a few seconds)
nothing changed
the 2 problems seam to be related as i observed them together
HELP
Anything you can do to have the LED light to keep blinking until you turn on the phone?
The current setting only have the light blink for like 5 minutes. Far too short and too easy to miss.
Even to extend the blinking period to 1 hour is much better.
I had the Galaxy Note 2 and S3 before, and they keep blinking until you switch on the phone.
Hi,
I have some problem with my notification LED. Some day it started behave weird - flashing all the time or flashing only when the phone was charging. Then it turned off and even after battery replacement it never comes alive, no mater which ROM am I using.
Is there a possible to fix this LED light or it is just dead?
Thanks in advance.