I've flashed m110s korean model with i9000 and I guess bootloader is gone...
Now it will not react to volume down+power+home.
Only computer will recognize usb connection for few seconds.
Is there any way to recover it without RIFF jtag and resurrector(without removing resistor)?
peter-kim said:
I've flashed m110s korean model with i9000 and I guess bootloader is gone...
Now it will not react to volume down+power+home.
Only computer will recognize usb connection for few seconds.
Is there any way to recover it without RIFF jtag and resurrector(without removing resistor)?
Click to expand...
Click to collapse
The reason for your problem is , you are pressing the wrong combo keys for download mode, read this and use repair kit to solve your problem
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
The reason for your problem is , you are pressing the wrong combo keys for download mode, read this and use repair kit to solve your problem
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
no, it's not keys error, now I have m110s with the same symptoms and it's not reacting to any keys combinations, I tried to flash I9000 bootloader to it and it died. now if I connect it to pc in device manager it asks for SEC S5PC110 Test B/D drivers for few seconds and after that it disappears.
so only soldering is a way to revive it?
mobifan said:
no, it's not keys error, now I have m110s with the same symptoms and it's not reacting to any keys combinations, I tried to flash I9000 bootloader to it and it died. now if I connect it to pc in device manager it asks for SEC S5PC110 Test B/D drivers for few seconds and after that it disappears.
so only soldering is a way to revive it?
Click to expand...
Click to collapse
Yes, you need to use JTAG, (z3x box) may do the job or if you want to try it by your self Look at My Android Solutions, (Link below) and also stickied in this forum for Problem Phone Dead, you can try unbreakable MOD, but seek advise from Adam Outler about it as it was designed for i9000 and not M110S
Check this out! Links to useful Guides and " Banned " Documentaries
damn, jtag is way too expensive for just one phone.
peter-kim said:
damn, jtag is way too expensive for just one phone.
Click to expand...
Click to collapse
well its done in Mobile service centers for a fee ( will depend on which one you go to) these days most mobile technicians have such boxes and they use it for Flashing directly to the mother board , which is the only way when download mode is inaccessible due to boot loader damage
Check this out! Links to useful Guides and " Banned " Documentaries
Related
As you may know people I have a How To on how to Flash Roms and Fix various errors on your phones.
I currently have an S4 Mini thats why i havent been in this Forum for a while sorry for the people that have been following me..
But, I am at a loss with this one...
My friend has an i9000 which he found and has an iPhone (dont ask he's a traitor)..
Anyway...
USB is not recognised on PC what I mean is I think the USB Charge Port is Dead
Can Boot to recovery And Download mode (which is a bit of a bonus I think)
In Recovery there is multiple errors such as....
E :.. unknown volume for path cache/recovery/log
cant mount...
cant open .....
So I think the Internal memory is corrupted or damaged... so any ideas guys
As I used to have a link on my How to Guide.. but cant find the person that posted there fix for this..
I do know its just a matter of fixing the re-partition but have no access through USB port
Help, if you can guys and remember the USB doesnt work and battery is getting charged by an external battery charger (mains)
EwOkie said:
USB is not recognised on PC what I mean is I think the USB Charge Port is Dead
Can Boot to recovery And Download mode (which is a bit of a bonus I think)
In Recovery there is multiple errors such as....
E :.. unknown volume for path cache/recovery/log
cant mount...
cant open .....
Click to expand...
Click to collapse
For USB problem use this guide to solve
For unknown path would normally be a CWM problem, so flash back to stock with PIT repartition or and use correct version of CWM and try or try switch CWM and correct version of ROM ( also check IMEI)
Check this out! Links to useful Guides and " Banned " Documentaries
Thats the guide I was talking about
Thanks for that and Cant flash as Recovery shows errors all over the place and I can get into Download mode
but need to get USB port working first :good:
As when you plug the cable into thats attached to the PC it lights up that its charging then goes off again every few seconds so could be the port or the Board itself
EwOkie said:
I can get into Download mode
but need to get USB port working first :good:
As when you plug the cable into thats attached to the PC it lights up that its charging then goes off again every few seconds so could be the port or the Board itself
Click to expand...
Click to collapse
you can flash using Mobile Odin a JVU or JVZ stock ROM, without PIT, to see if it boots follow this for Mobile Odin if phone can boot.
if not you can use a recovery tool to flash from PC , look in My Android Collections link below.
as for your USB question, had the answer in the back of my mind for that issue, but cannot recall it ay the moment , will see, if I can remember that but you should try the cleaning procedure in the mean time
Check this out! Links to useful Guides and " Banned " Documentaries
Quick question if its a board damage I take it i can get another board and fit that (swap over)
EwOkie said:
Quick question if its a board damage I take it i can get another board and fit that (swap over)
Click to expand...
Click to collapse
yes it will work as it also has all the parts related to power and charging too . look at image in USB link given earlier .
Check this out! Links to useful Guides and " Banned " Documentaries
Let you know how I get on thanks mate :good:
i tried unbrick my phone by odin
but my phone doesn't connect to odin
what's the problem? :crying:
note: i was install samsung usb driver 1.5.29
aa00aa00 said:
i tried unbrick my phone by odin
but my phone doesn't connect to odin
what's the problem? :crying:
note: i was install samsung usb driver 1.5.29
Click to expand...
Click to collapse
does your phone show the download mode screen?
yes
try different USB socket on your computer or try different USB cable
aa00aa00 said:
i tried unbrick my phone by odin
but my phone doesn't connect to odin
what's the problem? :crying:
note: i was install samsung usb driver 1.5.29
Click to expand...
Click to collapse
You can look at My Android Solutions ( link below) and this to solve your problems
Check this out! Links to useful Guides and " Banned " Documentaries
aa00aa00 said:
i tried unbrick my phone by odin
but my phone doesn't connect to odin
what's the problem? :crying:
note: i was install samsung usb driver 1.5.29
Click to expand...
Click to collapse
If it shows the downlod mode screen then you should probably check your phone drivers , install the correct ones.
Hi everyone. there is prob a thread on this coz i have read through many but im not that great with technology so need a personal step by step.
Anyway I have a samsung gt-I9000 or s1 but it dosent have google apps and cant play games etc so wanted to update it to a better rom . I have rooted it and have SU . my phone isnt recognized by my computer iv tried to fix it but installing correct drivers etc does nothing and i cant boot into recovery/download but i can get into recovery from a app on the phone and use a sd card reader to put stuff on the sd card . what i need help with is how can i use sd card and normal revoery mode which dosent allow me to go into the sd card just says update from sd which has to be in a right file path which i also dont know.
Also Rom manager dosent work on my phone I dunno why but a few apps dont :/
Model : GT-I9000
Firmware: 2.1-update1
baseband: I9000XXJM1
Kernel: 2.6.29
Build : ECLAIR.I9000XXJM1
I really need help with this and am a little slow with technology so bare with me xD.
Thanks
ukgt-I9000 said:
Build : ECLAIR.I9000XXJM1
Click to expand...
Click to collapse
The thing is you are still using JM1 ( BTW its hard to come by JM1 these days some people are searching for it like crazy) JM1 will not have recovery & download mode by combo keys, untill you fix it by flashing combo keys or by attaching it to KIES and updating it to Gingerbread .
To update the combo keys you need to flash the combo keys fix from here Look under recover recovery for it, If , I believe it may be difficult for you, use KIES to update your phone to ginger bread first.
If you cannot connect to KIES look here , it will give you step by step procedure to solve all problems
Check this out! Links to useful Guides and " Banned " Documentaries
Reply
xsenman said:
The thing is you are still using JM1 ( BTW its hard to come by JM1 these days some people are searching for it like crazy) JM1 will not have recovery & download mode by combo keys, untill you fix it by flashing combo keys or by attaching it to KIES and updating it to Gingerbread .
To update the combo keys you need to flash the combo keys fix from here Look under recover recovery for it, If , I believe it may be difficult for you, use KIES to update your phone to ginger bread first.
If you cannot connect to KIES look here , it will give you step by step procedure to solve all problems
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
ok so i need to upgrade to gingerbread using that walkthrough. according to it i need odin but i cant connect to a computer coz the usb dosent work and iv tried installinf multiple drivers and fixs but I dunno :/
Any ideas?
Thanks
ill let u know how it goes
ukgt-I9000 said:
ok so i need to upgrade to gingerbread using that walkthrough. according to it i need odin but i cant connect to a computer coz the usb dosent work and iv tried installinf multiple drivers and fixs but I dunno :/
Any ideas?
Thanks
ill let u know how it goes
Click to expand...
Click to collapse
read the part where its says Always start here, it has a guide for you to solve USB connection problems
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
read the part where its says Always start here, it has a guide for you to solve USB connection problems
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
I dont understand any of that. thansk for ur help but I think its hopeless im just not smart enough . So annoying not having google apps or be able to use any apps really bar whats on android market -.- .
i have a HTCdesire s that just gets stuck on boot logo but it has twrp which i can get into . Do u know anyway of fixing that so i can ugrade and use it? it has gingerbread i think coz it had google apps but i unlocked it which i think means its rooted but even if i could get it to turn on im sure rom amanger would work on it but iv no idea how coz again odin is a no go :/
thanks for help so far
ukgt-I9000 said:
coz again odin is a no go :/
Click to expand...
Click to collapse
Edit: Odin will not work with JM1, untill you can get download mode, so you need to use USB JIG ( will give you download mode), than you can use Odin, so use only KIES, download from Samsung, if you don't have it yet.
First Step :-
1) Check phone USB slot for contacts/connection problems
Some get misaligned others gets damaged internally, and others somehow moved and needed a nudge to connect, so clean them, just to be sure. Follow this guide
How to clean micro USB port
How to fix looseness.
Cleaning the USB slot and contacts will surely help as the Galaxy S model USB slot is prone to moisture as well as dirt retention, where users have complained about failure to charge or overheating when charging in colder regions. So a blow dryer may do wonders at times like this
Even IF your USB cable can charge the phone, data connection contacts could have been lost due to internal pin damage as I have personally experienced it , not to forget misaligned pins on the micro B slot itself experienced by others.
2) If phone is not being detected of a sudden (Quick Guide)
1. Reboot PC after a power cord pull and Reboot Phone after a Battery Pull , try USB connection
2. Try using a different Samsung USB cable (must be sumsung and nothing else)
3. Try a different USB port (use USB slots at the back of PC)
4. Try on a lap top or different PC
5. Try install nexus drivers - needed for ICS firmwares
6. Make sure you don't have fast charge on.
7. Try moving the USB plug slightly, sideway or back and front, whilst connected to PC
8. Toggle WIFI and OFF it , reboot phone, check connection
Trick
1. Turn ON Bluetooth with "make my device discoverable" checked
2. Connect the USB cable from the computer to the phone
3. you will get this message: " if you elect to use USB your Bluetooth connection will be interrupted - OK?"
4. Touch OK and connection problem is solved
3) Re Install the Samsung USB Driver or according to your manufacturer Drivers Android USB Drivers - Universal Installer or other Devices download from here or Android OEM Drivers here
Changes of ROM, also have configuration changes on the phone, (just like changes in combo key functions) ...so driver changes works for some
Trick Putting your Phone into download mode and connecting it with USB cable to PC will do it automatically. Meaning drivers will be installed by windows If there are none.
Check this out! Links to useful Guides and " Banned " Documentaries
reply
nothing works on my phone :/ it charges but nothing there fixed it :/
ukgt-I9000 said:
nothing works on my phone :/ it charges but nothing there fixed it :/
Click to expand...
Click to collapse
maybe its possible as JM1 is the first ROM for your phone and did not include even the recovery/download mode key functions, so either buy a USB JIG ( about a dollar or two) in ebay to enter download mode and use Odin3 or install KIES in your PC ( can download free from Samsung, just google Samsung KIES) to use Samsung KIES phone manager.
I am not sure if the latest KIES will work ( connect) with your (ancient) firmware, if not you need to download an earliest version of KIES to connect with a JM1 firmware.
so only two options, since you won't know how to use other methods to flash a combo key fix to get download mode.
Check this out! Links to useful Guides and " Banned " Documentaries
hi guys...
i have i9000 anycall is also clone because id board is m110s
i convert it to m110s using repair kit also successfull all of us is working..
but the xternal sd card is damage so i convert it to sd card using partition...
after that my phone is working fine.....
after one month the imei and baseband is damage is also no signal..
now i want to flash my phone using odin like before...
i set it to download mode..
but i encountered the problem of usb not recognize unknown device...
but if my phone is alive usb is working fine...
what can i do please help me....
sorry for my english......
1. Search google for ADB Usb Composite Device driver download it and then install it.
2. Connect your phone in download mode to the PC.
3. Open device manager and then right click on your device to update the driver and select manually install.
4. From the list select Adb usb composite device and confirm the.installation.
5. Close everything disconnect the device and connect it again. Now it should work
Sent from my i9000
TeKnoGin said:
1. Search google for ADB Usb Composite Device driver download it and then install it.
2. Connect your phone in download mode to the PC.
3. Open device manager and then right click on your device to update the driver and select manually install.
4. From the list select Adb usb composite device and confirm the.installation.
5. Close everything disconnect the device and connect it again. Now it should work
Sent from my i9000
Click to expand...
Click to collapse
thanks for reply ser but i tried ur sugestion also no luck..
i tried to change new usb port but still no luck...
can anyone help me...
thanks teknogin....
up for my thread...
please guys can u help me about my problem....
thanks.....
Happened With Me
This thing happened with me after i formatted my computer and I did the above method and it worked.
TeKnoGin said:
This thing happened with me after i formatted my computer and I did the above method and it worked.
Click to expand...
Click to collapse
i format my pc right now....
so i try ur sugestion thanks a lot ser.....
feedback later.....
thanks...
jamlee123 said:
i format my pc right now....
so i try ur sugestion thanks a lot ser.....
feedback later.....
thanks...
Click to expand...
Click to collapse
OK Gud Luck!!!
TeKnoGin said:
OK Gud Luck!!!
Click to expand...
Click to collapse
i finish format my pc but no luck...
i try to clean the board using lacquer thinner but not work...
how can i solve thiss problem huhuhu....
i'm going crazy..
please anyone can help me....
TeKnoGin said:
1. Search google for ADB Usb Composite Device driver download it and then install it.
2. Connect your phone in download mode to the PC.
3. Open device manager and then right click on your device to update the driver and select manually install.
4. From the list select Adb usb composite device and confirm the.installation.
5. Close everything disconnect the device and connect it again. Now it should work
Sent from my i9000
Click to expand...
Click to collapse
Thank you! Thank you! Thank you! It's working for me!
Ares
Ares355 said:
Thank you! Thank you! Thank you! It's working for me!
Ares
Click to expand...
Click to collapse
dude can u help me about my problem...
can share how do u do it...
please help me....
jamlee123 said:
dude can u help me about my problem...
can share how do u do it...
please help me....
Click to expand...
Click to collapse
Installed drivers.. Drivers were extracted to my desktop in a folder. Connected phone, clicked on USB mass storage (then its not using any drivers for it but I still could see it in Device Manager. Then I clicked on update driver (for unknown device), used option "Browse my computer..Let me pick drivers from list.." Added manually SAMSUNG Android Composite ADB Interface (from folder) .. And it worked..
Hope it will work for you.
I had a similar problems in the past:
1. one time cable was the problem
2. needed to reinstall OS
jamlee123 said:
please help me....
Click to expand...
Click to collapse
Look in
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
and [Tutorial] How to resolve micro USB connection problems [unknown USB device][code 43]
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Look in
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting]
and [Tutorial] How to resolve micro USB connection problems [unknown USB device][code 43]
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
ser thank for reply me....
now the phone is connected i flash it to repair kit...
now the phone is alive but still no imei and baseband unknow...
what can i do now ser pls help me.....
jamlee123 said:
dude can u help me about my problem...
can share how do u do it...
please help me....
Click to expand...
Click to collapse
Follow flashing guide How to Flash and UNBRICK Samsung Anycall Galaxy S ( SHW M110S )
Unbricking the Korean Galaxy S [SHW M110S]
try and tick clear EFS in Odin3 version .1.82 , when flashing first stage.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Follow flashing guide How to Flash and UNBRICK Samsung Anycall Galaxy S ( SHW M110S )
Unbricking the Korean Galaxy S [SHW M110S]
try and tick clear EFS in Odin3 version .1.82 , when flashing first stage.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
ser how can i solve my problem...
if i use the repair kit i was stuck on MOVINAND
i'm still in no imei and baseband unknown problem...
i'm really tried ur sugestion but i'm only stuck on no imei and baseband unknown problem..
please help me how can i solve this....
jamlee123 said:
ser how can i solve my problem...
if i use the repair kit i was stuck on MOVINAND
i'm still in no imei and baseband unknown problem...
i'm really tried ur sugestion but i'm only stuck on no imei and baseband unknown problem..
please help me how can i solve this....
Click to expand...
Click to collapse
when movinand cannot be flashed, you have to flash stage one and jump to stage 4 ( meaning 2 & 3 ) has to be skipped . So flash eclair DG23, after that flash WF07 Gingerbread ROM.
For baseband and IMEI read this Likely you need to take it to technician to use JTAG and edit the IMEI
just check your internal SD card and External are detected and functioning.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
when movinand cannot be flashed, you have to flash stage one and jump to stage 4 ( meaning 2 & 3 ) has to be skipped . So flash eclair DG23, after that flash WF07 Gingerbread ROM.
For baseband and IMEI read this Likely you need to take it to technician to use JTAG and edit the IMEI
just check your internal SD card and External are detected and functioning.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
the external sd card flash ic was unvailable also mount...
i used sd card partetion...
but when i flash it to repair kit totaly stuck on MOVINAND...
can i ask ser what is flash eclair DG23...
teach me how to use it....
i'm a technician to ser also trainer but i don't have a JTAG...
very very sorry that i desturb u....
u tried ur best to help...
thanks a lot ser....
jamlee123 said:
the external sd card flash ic was unvailable also mount...
i used sd card partetion...
but when i flash it to repair kit totaly stuck on MOVINAND...
can i ask ser what is flash eclair DG23...
teach me how to use it....
i'm a technician to ser also trainer but i don't have a JTAG...
very very sorry that i desturb u....
u tried ur best to help...
thanks a lot ser....
Click to expand...
Click to collapse
sad i didn't solve my problem...
i have volcano box and z3x...
when i connect my phone to volcano and z3x..
said phone not found...
i tried to dial *#7284# for usb port enable but didn't access...
also i try this thread: http://forum.xda-developers.com/showthread.php?t=772718&page=446
but not work for me.....
please anyone help me.....
jamlee123 said:
when i connect my phone to volcano and z3x..said phone not found...
Click to expand...
Click to collapse
DG23, is the repair kit
Man you got z3x, all you need is ask support from them and it can be edited with z3x look in EFS problems
Check this out! Links to useful Guides and " Banned " Documentaries
Hello,
my little sister have a problem with her phone(I9001 Galaxy S PLUS ).
The i9001 usb mass storrage is damaged.
After resetting (formatting usb mass storage) (force reset in recovery mode because It can't wipe the memory in the settings menu.)
This solution will work for a few days.
The next day (or with luck a few days) the phone will say again: Mass storage damaged.
How can i fix this problem ?
The phone is running stock (2.3.6).
(i have also this phone but its not on stock its is on cyanogen11)
rdrai said:
How can i fix this problem ?
The phone is running stock (2.3.6).
(i have also this phone but its not on stock its is on cyanogen11)
Click to expand...
Click to collapse
Format it in PC and again in CWM in your device and test.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
Format it in PC and again in CWM in your device and test.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Already tried in stock recovery.
By the way the phone is fully stock (No cwm).
rdrai said:
Already tried in stock recovery.
By the way the phone is fully stock (No cwm).
Click to expand...
Click to collapse
I meant, switch that SD card to your device and format it using CWM in your device, after that ou can place it back in your sisters.
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
I meant, switch that SD card to your device and format it using CWM in your device, after that ou can place it back in your sisters.
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
It is internal (USB Mass Storage)