Database Develop

Link2sd Invalid argument error

I've been trying to use link2sd but this error "mount script cannot be created. mount:Invalid argument". Other forums give fixes but they are bit vague as to what to do. I need a step by step fix. Please help

You need a partitioned sd card, have you tried other mount formats (fat32, ext2, ext3)?
What rom, kernel and scripts are you running?

Initially I used mini tool to partioned the sd card and all the formats didn't work. so i used cwm to partion the sd card partioning worked but link2sd is won't. Kernel:[email protected]#1
Rom:S5830XWKP7. I haven't an idea about the scripts though. how do i find that?

What is your rom because some roms aren't compatible with this script, but you can install the script !

I'm using a stock rom:S5830XWKP7
Sent from my GT-S5830 using xda app-developers app

Link2sd might give trouble in stock roms if the partition is in ext3 or ext4. Cwm makes an ext3 format pqrtition.
With minitool, make the partition in fat32 format, both partitions as primary, and try link2sd with fat32 and ext2 mount scripts to see if one of them mounts succesfully.
If you already tried this and didn't work, i dunno whats wrong, sorry i couldn't help.
Other solutions would be to flash a custom kernel with init.d support (such as cf-root or battery extender) these support all partition formats and give access to other methods of moving apps to the partition (s2e, int2ext script, amarullz, etc)

dxppxd said:
Link2sd might give trouble in stock roms if the partition is in ext3 or ext4. Cwm makes an ext3 format pqrtition.
With minitool, make the partition in fat32 format, both partitions as primary, and try link2sd with fat32 and ext2 mount scripts to see if one of them mounts succesfully.
If you already tried this and didn't work, i dunno whats wrong, sorry i couldn't help.
Other solutions would be to flash a custom kernel with init.d support (such as cf-root or battery extender) these support all partition formats and give access to other methods of moving apps to the partition (s2e, int2ext script, amarullz, etc)
Click to expand...
Click to collapse
I had the same problems and I tried switching around the formats too.
One thing that did work for me, twice, was to completely format the card and recreate both the partitions on the SD card each time whenever I flashed a new ROM and was going to use Link2SD or S2E. And I used FAT32 for the Link2SD partition. Formatting only the second partition always gave me the mount error.
Hope this helps!

Not all Aces are equal. I don't know the difference, but I had 2 Aces, the ROM info shows same version of software. On one (older one) EXT3 worked, on the newer one it didn't and I had to use FAT32. Strange. I also noticed one Ace (newer one) is a bit THINNER! Same rooting worked for both Aces...

Partioning both as fat32 doesnt work as the phone reads the card as damaged
Sent from my GT-S5830 using xda app-developers app

Why don't you just use the move to SD card function in Settings > Applications > Manage Applications?

That works however the phone internal memory isnt increased and apps are still part on internal memory
Sent from my GT-S5830 using xda app-developers app

sjg2797 said:
That works however the phone internal memory isnt increased and apps are still part on internal memory
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
That's how Link2SD works. Internal memory is still the same, and application data isn't moved to the SD card.
The actual app file, dalvik cache and library files are moved to the SD card.
If you go to the application management system option, you'll see applications are still taking all the memory space they're supposed to take. Well, that's what the phone thinks, but they're actually not.
Of course, all of this and more is included in the official [url="http://www.link2sd.info/faq]Link2SD FAQ[/url], but then again, everyone knows FAQs are not supposed to be read, and I won't be bugging you more about this subject because I too didn't read the FAQ at first, and once asked similar questions.

Darkcloud4491 said:
Why don't you just use the move to SD card function in Settings > Applications > Manage Applications?
Click to expand...
Click to collapse
Perhaps the op actually wants to move whole apps to the SD and not leave massive chunks still in /data partition? Or maybe that doesnt provide enough space?

Use cronmod script its a flashable zip you mount/data and mount/system that's it done just search cronmod and you will find what you need
my ace is 'ACE'

invalid argument
both of my partitions are fat32, but i had to select ext4 in link2sd to get it to mount. is this a normal fix? or is it not going to function properly?
is it possible to use an sd card to increase /data and /system? cuz even with link2sd i keep running out of internal space, and ive only got 18 mb free in system. my link2sd is set to install to external and autolink.
im using this rom: 【ROM】【=CM10=】【=Aroma=】| ★★ Optimus Prime v1.8 ★★ | 16-04-2013 | 《 Reborn © ✌ 》

Solution of the problem mount script error
NOW I AM GONNA TELL U ABOUT THE MOST MAJOR PROBLEM
WHICH IS A SIILY MESSAGE BOX APPEARS TELLING YOU THAT
(MOUNT SCRIPT CAN NOT BE CREATED. MOUNT: INVALID
ARGUMENT)
BUT HERE IS THE REAL ERROR THAT CAUSED THE MESSAGE BOX
AND IT IS THAT THE PARTITIONS PASS IS WRONGLY CREATED
AND HERE HOW CAN IT BE FIXED U R GONNA OPEN APARTED AND
RECREATE THE PARTITIONS THEN GO TO THE CONFIGURATION PART
AND CHANGE THE DETECTED DEVICE FROM (MMCBLK0)
TO(USBDISK) THEN AUTOMATICALLY THE PATH SHOULD BE
CHANGED FROM (/DEV/BLOCK/MMCBLK0) TO (/DEV/BLOCK/SDA)
AND SURELY YOUR PROBLEM SHOULD BE SOLVED
THEN OPEN THE LINK2SD THERE SHOULD BE A MESSEGE APPEARED
SAYING
AND IF NOT YOU SHALL GO TO THE OPTIONS AND
CHOOSE (RECREATE NEW LINK SCRIPTS) CHOOSE THE PARTITION S
SYSTEM AND HERE IT IS YOU JUST GOT YOURSELF A SUCCESSFUL
LINKING
If IT DIDN T WORK THEN YOU R GONNA HAVE TO FULLYSHUTDOWN
YOUR MOBILE THEN REBOOT
AND I ASURE U IT IS GONNA WORK
:good:
:laugh:

Expatiate
John Risky said:
NOW I AM GONNA TELL U ABOUT THE MOST MAJOR PROBLEM
WHICH IS A SIILY MESSAGE BOX APPEARS TELLING YOU THAT
(MOUNT SCRIPT CAN NOT BE CREATED. MOUNT: INVALID
ARGUMENT)
BUT HERE IS THE REAL ERROR THAT CAUSED THE MESSAGE BOX
AND IT IS THAT THE PARTITIONS PASS IS WRONGLY CREATED
AND HERE HOW CAN IT BE FIXED U R GONNA OPEN APARTED AND
RECREATE THE PARTITIONS THEN GO TO THE CONFIGURATION PART
AND CHANGE THE DETECTED DEVICE FROM (MMCBLK0)
TO(USBDISK) THEN AUTOMATICALLY THE PATH SHOULD BE
CHANGED FROM (/DEV/BLOCK/MMCBLK0) TO (/DEV/BLOCK/SDA)
AND SURELY YOUR PROBLEM SHOULD BE SOLVED
THEN OPEN THE LINK2SD THERE SHOULD BE A MESSEGE APPEARED
SAYING
AND IF NOT YOU SHALL GO TO THE OPTIONS AND
CHOOSE (RECREATE NEW LINK SCRIPTS) CHOOSE THE PARTITION S
SYSTEM AND HERE IT IS YOU JUST GOT YOURSELF A SUCCESSFUL
LINKING
If IT DIDN T WORK THEN YOU R GONNA HAVE TO FULLYSHUTDOWN
YOUR MOBILE THEN REBOOT
AND I ASURE U IT IS GONNA WORK
:good:
:laugh:
Click to expand...
Click to collapse
Can you please be a bit more detailed seeing as you have not expressed yourself adequately to be of assistance. kindly try enumerating the points instead of lumping them.
1.PARTITIONS PASS IS WRONGLY CREATED ..... i believe you mean path please come again and where is this partition part so i can reconfigure it.

sjg2797 said:
I've been trying to use link2sd but this error "mount script cannot be created. mount:Invalid argument". Other forums give fixes but they are bit vague as to what to do. I need a step by step fix. Please help
Click to expand...
Click to collapse
Have you partitioned your sd card to ext2/ext3/ext4? If it's ext2 then make sure you select ext2 in link2sd. Your phone has to be rooted.

john risky said:
now i am gonna tell u about the most major problem
which is a siily message box appears telling you that
(mount script can not be created. Mount: Invalid
argument)
but here is the real error that caused the message box
and it is that the partitions pass is wrongly created
and here how can it be fixed u r gonna open aparted and
recreate the partitions then go to the configuration part
and change the detected device from (mmcblk0)
to(usbdisk) then automatically the path should be
changed from (/dev/block/mmcblk0) to (/dev/block/sda)
and surely your problem should be solved
then open the link2sd there should be a messege appeared
saying
and if not you shall go to the options and
choose (recreate new link scripts) choose the partition s
system and here it is you just got yourself a successful
linking
if it didn t work then you r gonna have to fullyshutdown
your mobile then reboot
and i asure u it is gonna work
:good:
:laugh:
Click to expand...
Click to collapse
could you please elaborate it...

worked for me on my moto e
same problem solved by making the partition as primary partition ..try it

Unavailable internal SD storage

Hello everybody. I'm facing internal SD storage malfunction. When the phone starts the memory is shown, only the system memory is at 0.00b, but after some time all memory becomes unavailable. After the phone starts and I quickly plug the usb I can access the internal SD storage and I can play files from it (the files were put before this happened). I think it is worth mentioning that before this I had error E:Can't mount /dev/block/mmcblk0p1 which restricted the phone form booting up. Then I flashed the stock rom (v2.2.1) and speedmod kernel and the phone booted. My phone model is i9000. I would be very grateful for any help you can provide. Thank you for advance.
PS. I have read a lot of articles about this memory problem but I couldn't find any specific solution for i9000.

wladylnik said:
E:Can't mount /dev/block/mmcblk0p1
Click to expand...
Click to collapse
try a solution for that problem from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power
button for a minute, than powerup without SIM and Ext.SD Card....
Tips before Flashing:-
Backup all your important files, contacts, SMS, game data, images etc to PC or
Ext SD card. or make Nanadroid Backup If you have CWM
Backup your EFS Folder to PC or Ext SD card
Enable USB Debugging on Phone. Touch menu>Settings>Applications>Development>
Charge your battery to more than 50% before you attempt any sort of flashing.
Disable Samsung KIES when using Odin. Kill Kies.exe, KiesTrayAgent.exe, &
KiesPDLR.exe using Task Manager on PC
Use only ROM and solution for your model and Wipe x3

Is it possible that I messed up my internal storage because I didn't turned off lagfix when I flashed new custom rom?

wladylnik said:
Is it possible that I messed up my internal storage because I didn't turned off lagfix when I flashed new custom rom?
Click to expand...
Click to collapse
yup, that is the main culprit for internal storage not being recognized as your partitions have may have been changed to ext4 and samsung original format is rfs

anewith aug
is it possible to fix this?

wladylnik said:
is it possible to fix this?
Click to expand...
Click to collapse
Its depends and not that easy but you can try solutions already mentioned in My Android Solutions

wladylnik said:
is it possible to fix this?
Click to expand...
Click to collapse
Just flash with pit file in odin.
Sent from my GT-I9000 using xda premium

I used your methods but nothing changed

wladylnik said:
I used your methods but nothing changed
Click to expand...
Click to collapse
read this

thanks for help xsenman but the problem still exists. I think the internal memory is dead. But it is strange that I can still view old stuff on it :|

Its not dead -_- you need to go into cwm recovery and format /sdcard. It'll delete all your files but might fix the problem.
Sent from the beast that ate my sisters iPhone 4S.

wladylnik said:
thanks for help xsenman but the problem still exists. I think the internal memory is dead. But it is strange that I can still view old stuff on it :|
Click to expand...
Click to collapse
you need to format all the partitions back to rfs (vfat or fat32) for samsung phones using firmware, lagfixing would have changed them to ext4.

I have checked the partition type with speedmod kernel and it shows that it is rfs not ext4. so the problem is something else.

wladylnik said:
I have checked the partition type with speedmod kernel and it shows that it is rfs not ext4. so the problem is something else.
Click to expand...
Click to collapse
If all internal partitions ( meaning system and data ) are rfs, firmwares will not have a problem. unless you had used onenand mode , where the sytem partion will be swapped with the data partition .
anyway the best way to resolve this, is to use the speed mode kernel and have your EXT SD card partitioned into two , to operate the phone like normal till you can resolve the internal sd card problem

[Q] After formatting internal SD with NTFS it can't mount nor format even with CWM

It happened after formatting it with NTFS (it was a temporary thing so I can use it with one of Microsoft services), and my device is working and rebooting properly without any error messages..So what can I do now to make my SD working again?
(I don't really need the data that was on it, I just need the card to work)
Thanks..

ramy670 said:
It happened after formatting it with "Windows7-USB-DVD-Download-Tool" (I was trying to use it as USB flash memory in order to install windows), and my device is working and rebooting properly without any error messages..So what can I do now to make my SD working again?
(I don't really need the data that was on it, I just need the card to work)
Thanks..
Click to expand...
Click to collapse
try formatting the card from within CWM, i presume if you boot up the phone you can't mount/unmount it and subsequently format it from within Android.
but i would try fromating it as FAT32 from within Windows 7 first, NTFS is not supported by Android to the best of my Knowladge...

Thanks, yes I can't format it in Android since i can't mount it, I've already tried formatting it from CWM with no luck, it showed this:
Formatting /sdcard...
Error mounting /sdcard!
Skipping format...
Done.
And windows doesn't see the card at all when I connect phone to PC, so I can't use windows to format it too.

ramy670 said:
so I can't use windows to format it too.
Click to expand...
Click to collapse
Try a formatting tool or recovery tool in My Android Collections

olaf2k4
Turned out you're right, the problem is android not being able to handle NTFS properly, I tried to format external SD card with NTFS to see what will happen, and I had the EXACT same symptoms, but of course I removed from phone and had it formatted using card reader and it's working properly now with my phone..
xsenman
The problem now is that windows can't see internal card at all, I've tried one of format tools form the link you put, but it didn't help since phone "doesn't allow" windows to detect the memory, any other way to do it? right now I'm trying this:
http://forum.xda-developers.com/showthread.php?t=1724078

It seems like it isn't easy to install NTFS support from the link above (since you need fuse.ko file that should be compiled for both your device and ROM), is there any kernal that support NTFS or any other easy way to do it?

If you are talking about your external sd just format at fat32. This is standard for sdcards and your phone wil reconize your card..

Unfortunately it is the internal one..

ramy670 said:
Unfortunately it is the internal one..
Click to expand...
Click to collapse
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...

Anyone?..

Swaps100050 said:
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...
Click to expand...
Click to collapse
Finally, I found a solution, just do the following (I tried it and it worked):
1. First install the drivers ONLY if you haven`t already installed them, also if you have Kies installed there is no need to install these drivers, but you are better off installing these anyway : http://dev-host.org/ZRA
2. Download this package (it includes i9000 stock rom+kernel+odin) : http://dev-host.org/RAE, if you have a Captivate or a Vibrant just download a stock rom for your phone model and find a kernel which has root and cwm in it.
NOTE : The next step will require using the 3 key combo for accessing the clockworkmod recovery and also the download mode.The 3 key combo used below is for the Samsung Galaxy S GT-i9000. If you own a Captivate or a Vibrant please click this link and choose your phone model to see what 3 key combo must be used, as it differs from one phone model to another : http://tinyurl.com/6q6ajpx
3. After you have extracted all the contents you downloaded and installed drivers, put your phone into download mode using the 3 key combo : volume DOWN + home button+power button, keep those pressed until it goes into download mode.
4. Connect phone to PC via USB Cable and open Odin (windows should detect the phone and install some drivers, after it`s finished you should see the message "Added!" in Odin which means Odin succesfully detected your phone so now you are ready to flash)>check Re-Partition Option>press PIT button and browse for the s1_odin_20100512.pit file, press BOOTLOADER button and browse for the APBOOT… file, press PDA button and browse for the CODE….file, press PHONE button and browse for the MODEM….file, press CSC button and browse for the GT-I9000-CSC….file. PRESS START button and wait for the green pass notification in Odin.
• When the phone reboots into the rom, wait for the setup wizard to appear and then just use the 3 key combo into the download mode again.
Close Odin and open it again> press PDA button and browse for CF-Root…file> Press START button and wait for the green pass notification in Odin.
Click to expand...
Click to collapse

ramy670 said:
Finally, I found a solution, just do the following (I tried it and it worked):
Click to expand...
Click to collapse
No need to do all this.
Just:
- remove external sd card (if you have one inserted)
- reboot into CWM-based recovery
- mounts and storage
- mount USB storage
You will be able to see and format, FAT32, the disk using windows

N3tMast3r said:
No need to do all this.
Just:
- remove external sd card (if you have one inserted)
- reboot into CWM-based recovery
- mounts and storage
- mount USB storage
You will be able to see and format, FAT32, the disk using windows
Click to expand...
Click to collapse
hello, i also did this stupid mistake on my part. Formatted the Internal memory of my Pantech Burst to NTFS. Now its unformattable, unmountable etc. I tried ur way, but it throws up an error
"Unable to write to ums lunfile (no such file or directory)"
wat to do ?

Swaps100050 said:
ny solutions?? :crying:
me facing same problems... phone doesn't detects internal sd, neither it connects to pc via mass storage... :crying:
I don't care about the data in it even if its gone, I jus want my internal sd back...
Click to expand...
Click to collapse
what i did was to go in recovery mode...mount usb ...conect to pc and reformat to fat 32..

harryneopotter said:
hello, i also did this stupid mistake on my part. Formatted the Internal memory of my Pantech Burst to NTFS. Now its unformattable, unmountable etc. I tried ur way, but it throws up an error
"Unable to write to ums lunfile (no such file or directory)"
wat to do ?
Click to expand...
Click to collapse
Are u able to wipe data/factory reset? If u are able to do so do it and then follow my procedure... if u are not able, try to follow my procedure more carefully. It is the only thing I can suggest, sorry

N3tMast3r said:
Are u able to wipe data/factory reset? If u are able to do so do it and then follow my procedure... if u are not able, try to follow my procedure more carefully. It is the only thing I can suggest, sorry
Click to expand...
Click to collapse
I tried your method, but selecting "Mount USB" was throwing the error i mentioned in my last post. Though i solved it eventually. Somehow i ended up in the phone's own recovery/bootloader menu, had an option of "Low level format" there. Took around an hour or so .. but it worked :good:

Sc-02 internal mmc corrupted

Hello guys
I got this phone from my friend for repair purpose
Its internal memory is corrupted
Tried formatting pit but didnt help
So how to force format internal mmc
Is it possible to format with riff?
After galaxy s logo it show black screen (off) with capacitive keys light on
Thanks
Sent from my XT910 using Tapatalk

faheemakbar18 said:
After galaxy s logo it show black screen (off) with capacitive keys light on
Click to expand...
Click to collapse
How sure are you that your SD card is corrupt? If you can enter download mode you can/should flash the correct ROM
Look here for ROMS and here for guide If you are sure you need to format than read this
Check this out! Links to useful Guides and " Banned " Documentaries ​http://forum.xda-developers.com/showpost.php?p=31017954&postcount=5335

I am sure its corrupted as it boot to recovery after res from odin
Checksum md5 something like and later sd card mounting no such location
with cwm recovery i cant format sdcard internal it also say no such location
Sent from my XT910 using Tapatalk

faheemakbar18 said:
I am sure its corrupted as it boot to recovery after res from odin
Checksum md5 something like and later sd card mounting no such location
with cwm recovery i cant format sdcard internal it also say no such location
Sent from my XT910 using Tapatalk
Click to expand...
Click to collapse
well, than you have to try using an external SD card with 2 partitions to get phone working ( most likely needs a technician to remove internal SD card and use only external SD card. I am not sure if there have a modified kernel for this device and if any i9000 ROM can be used, if possible than you can use speedmod kernel to get phone working, so PM those who have threads about SC 02B about it.
search in this forum for guide a ny possible guide too
Check this out! Links to useful Guides and " Banned " Documentaries ​

xsenman said:
well, than you have to try using an external SD card with 2 partitions to get phone working ( most likely needs a technician to remove internal SD card and use only external SD card. I am not sure if there have a modified kernel for this device and if any i9000 ROM can be used, if possible than you can use speedmod kernel to get phone working, so PM those who have threads about SC 02B about it.
search in this forum for guide a ny possible guide too
Check this out! Links to useful Guides and " Banned " Documentaries ​
Click to expand...
Click to collapse
thanks
finally i got it working by flashing latest gb firmware and then i9000 gb kernal speedmod (yeah i9000 because couldnt find sc-02b)
and formatted sd card via special tool in cwm
rebooted but it show no service
I reflashed that firmware (this time without flashing i9000 kernel) still i get no service
but with network selector it search all available networks but doesnt register to any
*#7465625# show every thing off

[MOD] ZTE Blade S6 (P839F30) partitioning storage

Hi,
if you feel like repartitioning your device or just try something new. Now you can...
I had a look at the partitions of our device and thought of merging the userdata and sdcard0 partitions to gain more space and using the newer storage layout with data/media. After searching I found some infos, changed a script and voila it worked and now I have one partition for data and media.
Preparation:
Caution playing with the partition table is very risky and can damage your device permanently or to say it can brick!!!
Make every backup you can thing of!
So maybe go into QHSUSB__BULK mode by using attached Send_Command.exe like stated below, where comport is your actual port like COM9.
Code:
Send_Command.exe \\.\comport
# ENTER
More infos here.
Get a copy of HDD-Raw-Copy-Tool or similar like EMMCRAW. Make a hard copy of your device memory.
Make definitively a TWRP backup.
Now use this zip and flash it via TWRP, note that you should put the zip on a external sd card or use adb sideload.
Next you should got into wipe and select format data, type yes and acknowledge it.
Now you should have more than 11GB as data storage, see pics in the attachment.
When you do the switch you should also switch TWRP to one which do not support sdcard0, cause this partition is gone
Please note: This mod will like not work properly if your using stock rom from zte!
I also made a zip for spliting and recreating the sdcard0 and userdata partitions, after using it, you should also format data like described above. And format your new sdcard0 partition properly as fat. This zip works also, I tested it. Maybe one can improve the script, saving extra formating the partitions.
This zip should provide infos about the partitions of your device...
Credits:
petrov.0 and his thread, which has all infos and the original zip files, which I modified

awesome, thanks a lot for sharing!
makes this device useable much better!

lightwars said:
Hi,
if you feel like repartitioning your device or just try something new. Now you can...
I had a look at the partitions of our device and thought of merging the userdata and sdcard0 partitions to gain more space and using the newer storage layout with data/media. After searching I found some infos, changed a script and voila it worked and now I have one partition for data and media.
Preparation:
Caution playing with the partition table is very risky and can damage your device permanently or to say it can brick!!!
Make every backup you can thing of!
So maybe go into QHSUSB__BULK mode by using attached Send_Command.exe like stated below, where comport is your actual port like COM9.
Code:
Send_Command.exe \\.\comport
# ENTER
More infos here.
Get a copy of HDD-Raw-Copy-Tool or similar like EMMCRAW. Make a hard copy of your device memory.
Make definitively a TWRP backup.
Now use this zip and flash it via TWRP, note that you should put the zip on a external sd card or use adb sideload.
Next you should got into wipe and select format data, type yes and acknowledge it.
Now you should have more than 11GB as data storage, see pics in the attachment.
When you do the switch you should also switch TWRP to one which do not support sdcard0, cause this partition is gone
Please note: This mod will like not work properly if your using stock rom from zte!
I also made a zip for spliting and recreating the sdcard0 and userdata partitions, after using it, you should also format data like described above. And format your new sdcard0 partition properly as fat. This zip works also, I tested it. Maybe one can improve the script, saving extra formating the partitions.
Credits:
petrov.0 and his thread, which has all infos and the original zip files, which I modified
Click to expand...
Click to collapse
How can I switch TWRP? "When you do the switch you should also switch TWRP to one which do not support sdcard0, cause this partition is gone"

done hope everything works fine now ...90min of sweating..

there is an easiest way to do it? unfortunately I did not understand much, you can explain step by step how to do

it works for eu devices ?????

sir jufer said:
it works for eu devices ?????
Click to expand...
Click to collapse
do not know, no device to test with. try the zip, which should show some infos about the partition layout, actually it didn't worked out on my device, like it should...
If it do not work for you: it should copied sgdisk on your device to /tmp/sgdisk. Still in recovery use in the terminal or via adb shell the following commands:
Code:
/tmp/sgdisk -p /dev/block/mmcblk0
/tmp/sgdisk --info=30 /dev/block/mmcblk0
/tmp/sgdisk --info=31 /dev/block/mmcblk0
copy your recovery log to sd and post it here.

ok i do it, now i have 11.41gb storage but i cant save nothing on it, why.... no external storage avaible
How can I switch TWRP? "When you do the switch you should also switch TWRP to one which do not support sdcard0, cause this partition is gone"

muzungu77 said:
ok i do it, now i have 11.41gb storage but i cant save nothing on it, why.... no external storage avaible
How can I switch TWRP? "When you do the switch you should also switch TWRP to one which do not support sdcard0, cause this partition is gone"
Click to expand...
Click to collapse
try recovery-twrp2870-p839f30-physical.img from here.

nForce said:
try recovery-twrp2870-p839f30-physical.img from here.
Click to expand...
Click to collapse
ive yet recovery-twrp2870-p839f30-physical.img
i have as version, so i installed that recovery, the install mod , all fine but if i try to snap a photo the system tell me no ext memory avaible

Help guys!! After install CM12.1 I've flashed this mod on my EU device but it doesn't work. I've made a full wipe and now I have a nice bricked phone without an OS installed. The phone can't mount E: internal storage and I can't install an other ROM.
Is there any way to make the phone useful again? Thanks!!

Did you flashed recovery for external SD card first? @mir2006

Jaglicic said:
Did you flashed recovery for external SD card first? @mir2006
Click to expand...
Click to collapse
How can I do this?? There is any "how to"?
Once installed, what can I do?? Thanks for all

mir2006 said:
How can I do this?? There is any "how to"?
Once installed, what can I do?? Thanks for all
Click to expand...
Click to collapse
Read first post... Sorry, That's only I can tell you.. I followed the instructions in the OP and all went well...

mir2006 said:
Help guys!! After install CM12.1 I've flashed this mod on my EU device but it doesn't work. I've made a full wipe and now I have a nice bricked phone without an OS installed. The phone can't mount E: internal storage and I can't install an other ROM.
Is there any way to make the phone useful again? Thanks!!
Click to expand...
Click to collapse
Have you read the whole op?
Which back up do you have?
Why were you doing the full wipe of all? Just need to format data partition,which will erase all settings you have done in cm and also files you habe saved there.
Use an external sd card to install the rom again.
Visit the linked modaco thread,there grab the recovery template zip and also the TWRP for emulated internal storage and place it inside the zip file,like described there.Flash it and reboot.
BTW the mod was not tested on EU Variante devices or none reported back here.cause I gave instructions to get the partition infos for these devices.

lightwars said:
Have you read the whole op?
Which back up do you have?
Why were you doing the full wipe of all? Just need to format data partition,which will erase all settings you have done in cm and also files you habe saved there.
Use an external sd card to install the rom again.
Visit the linked modaco thread,there grab the recovery template zip and also the TWRP for emulated internal storage and place it inside the zip file,like described there.Flash it and reboot.
BTW the mod was not tested on EU Variante devices or none reported back here.cause I gave instructions to get the partition infos for these devices.
Click to expand...
Click to collapse
Thank you guys! The mod works perfectly on my EU device and I could install CM again

HDD Raw Copy Tool won't recognize my phone while in QSHUSB_BULK mode... any hint?

Have your pc mounted several partitions and most have to be Format,which you should not do?? When this is not the case you are not in the right mode.

lightwars said:
Have your pc mounted several partitions and most have to be Format,which you should not do?? When this is not the case you are not in the right mode.
Click to expand...
Click to collapse
it's not the case that my phone is bricked, it's fully functional but i wanted to grab a full raw backup before doing the partition mod
when it's powered on and connected to my pc with debugging enabled i get no COM-Port in device Manager.
when it's powered down and i connect it while pressing Vol-UP+Vol-Down i get a COM-Port and i install the QSHUSB_BULK driver i see a COM-Port but no drives show up in device Manager...
what step am i missing?
which methods are there to set the phone in download mode?
thank you!

eis0r said:
it's not the case that my phone is bricked, it's fully functional but i wanted to grab a full raw backup before doing the partition mod
when it's powered on and connected to my pc with debugging enabled i get no COM-Port in device Manager.
when it's powered down and i connect it while pressing Vol-UP+Vol-Down i get a COM-Port and i install the QSHUSB_BULK driver i see a COM-Port but no drives show up in device Manager...
what step am i missing?
which methods are there to set the phone in download mode?
thank you!
Click to expand...
Click to collapse
Yes,that is what I meant,your not in the right mode,when you cannot see any disks.
Try the methode described in the OP.
lightwars said:
So maybe go into QHSUSB__BULK mode by using attached Send_Command.exe like stated below, where comport is your actual port like COM9.
Code:
Send_Command.exe \\.\comport
# ENTER
More infos here.
Get a copy of HDD-Raw-Copy-Tool or similar like EMMCRAW. Make a hard copy of your device memory.
Click to expand...
Click to collapse