Related
So after looking around through the forums I have learned a lot, and I have appreciated every piece of information I have been given, but there have been some things I have either not found answers to, or have not found complete answers (ie: someone only asked part of what I'm asking).
*Phone info listed in Signature*
When giving an answer, please number it according to the question and/or Quote the question, Please do not quote the entire post.
1. IMEI Device ID: Can I change it? and How?
- After Flashing and Rooting, my email exchange account no longer recognizes my phone and asks me to validate the Device ID. I did get Exchange to work when I had 2.1 and I'm not doing anything different from before. (Note: Android Device ID and IMEI Device ID are 2 different things)
Answer: Your IMEI Device ID is located on the back of your phone. You can find it by removing the battery and then it is the number above the first barcode. Your IMEI ID is something you neither can change nor want to. If a problem occurs trying to get Exchange to work again after messing with your phone, try connecting to the network at the location of your exchange account. Make sure your phone is registered, if it's not, register and wait a day before attempting to connect to exchange again. If that still doesnt work, contact their IT dept and have them manually add your phone. Also, see Post#4 or Exchange Thread
2. Android Device ID:
a)Is the number/letter sequence located on my battery, my Android's ID?
b)In the app "Android ID Changer", when I change it to said ID on battery and click "Save" nothing happens, the ID that the App gives me is still listed at the top.
Answer: If you flash and root with what I've given in my signature, your Android Device ID should be the same or there shouldn't really be anything you need to worry about that requires it. Your IMEI ID is the important one. Also Reference the Device ID Thread, and please make sure you write yours down before flashing and rooting!!!!
3. Sounds Sounds Sounds!!!!!: OK, so I know everyone wants to have their own custom tones right? Well, after looking around for a little while, I haven't really found full solutions as to what I want:
There are 6 Different Kinds of Tones, and a 7th Tone Type I would like added:
- Voice Call Tones: As main ringtone and per contact(As Title)
- Notification Tones: (Text Messages, Email, etc)
- Music: Your media, the only files that should show up in "Music Player"
- Alarm Tone: In the Default Clock App, under Alarm Creation
- Smart Alarm Tone: In the Clock App also under Alarm Creation
- Screen Touch "Pop" Tone (When you click an app)
- Reminder Tone: Reminds you that you have a text or missed call(Not included on phone currently)
a) OK, with that list, when I go in to choose for each one, you get a menu (for example Voice Call gives you: Silent, AT&T Tone, Bird loop, ..., Samsung tune, ...). I would like for my custom sound files to show in the Default list of each according Tone type as listed above. How do I do it?
b) How do I differentiate the Text message tone from the email tone? How do I make make text message tones & settings individual/separate from Notification Tones and Settings?
c) Reminder Tone: When I had a motorola back in the day, if my phone rang at me and I was too busy or not around it at the time to look at it, about every 5 minutes, it would beep at me telling me that something happened while I wasnt paying attention. Is there a way that I can add this feature to my Captivate?
4. ASTRO vs. My Files(on 2.2-Froyo): It seems like "My Files" has everything that ASTRO has, yet I've seen a lot of people saying to get ASTRO. Is there any reason to have it?
Answer: If you have enabled the Side-Loading of apps, there is no real difference between these two other than their appearance since you can bring up the .apk installer that's included in both programs. Other options to using these to programs are: Root Explorer
5. Default Samsung App: Daily Briefing: There has got to be something better than this out there, any suggestions?
- Also, I already have a big clock that has weather(Fancy Widget), so I dont really rely on Daily Briefing for it
Answer: If you are looking for something in terms of a
Widget NewsReader: try Feedr for news, Auto Express for Car News, and ScoreCenter for Sports News
Non-Widget news readers include: Google Reader, gReader, & NewsRob.
6. Tethering/I'm Tethered, What Now?:
a) I know that my laptop can access WIFI via MobileAP, but how can I connect with my Laptop via USB Tethering. I have Windows XP Pro SP3
b) Is it possible for me to use my Laptop to send Txt Msgs?
c) Assuming I have hundreds of Contacts, Is to possible to keep ALL Contacts on laptop while keeping only most used contacts on phone?
Answer:
a) USB Tethering can be accomplished through apps like EasyTether or PDANet, but most ROM's for the captivate do have it standard. It would be under Menu > Settings > Applications > USB Settings > PC Internet.
b)
c)
7. Removing the Default "Latitude" App (2.2-Froyo): I already have Maps, Navigation, and Places. Why would I need "Latitude"? What is the purpose of it?
I use Titanium Backup Pro to "Freeze" most of the default apps (freeze meaning hide them w/o deleting them) but I cannot seem to find "Latitude" in the list of Apps, is there a way to freeze it with Titanium?
8. Allshare Default App 2.2: What does it add to the phone? Do I need it or should I "Freeze" it?
I'm looking for a way to play my media from my computer to my phone, however Windows Media Player doesnt recognize my phone as something to share to, how can I change this? (I use Windows XP Pro SP3)
9. FM Radio: Is there a way I can listen to my favorite channel without using up any data? And if I listen to the channel for about an hour, how much data will I have used? (So far, I've only seen Last.FM and TuneIn Radio)
Answer: Best thing to do if you want to listen to the Radio on your phone is to do it via Wifi. Unfortunately for us, our phone originally had plans to have a FM Chip installed allowing us free FM Radio, but that's just not how AT&T rolls. Another App besides Last.FM or TuneIn Radio to try is iheartradio. Furthermore, if you are wanting to watch your Data Usage, I suggest trying 3G Watchdog, I don't know how accurate it is from month-to-month, but it is an App(and Widget) that does watch your data usage.
10. Is there a way to rename the apps in my App Drawer? Some of them have strange/long names which will break a work so that it is on both lines or the whole title doesnt fit. This bothers my OCD so I was wondering if there was an easy way to do it.
11. Random Reboots When I don't have an Alarm enabled, sometimes my phone seems to go and sleep/hibernate/reset. Meaning I pickup my phone and for some reason it has gone and turned off on me. What's the deal? Does anyone else have this problem and is there a way to fix it?
12. Save Texts: What is the best way to save your text conversations to your computer besides using KIES?
13. Save Contacts What is the best way to Export Contacts to your computer for editing and later Importing back onto the phone besides using KIES?
- I want to have a back up of all my numbers so that I can remove some from my address book, but still have them on my computer in case I need them later.
14. GPS 2.2: Many have commented about fixing the 2.1 GPS, does the 2.2 GPS also need a fix?
15. Editing the System: Where Can I find in-depth threads that tell me how to change things in the system(thread links accepted)? I would like some that cover it in general, but I'd also like ones that also include adding and removing custom ringtones to the default as well as SetCPU and other functions.
16. The Lock Screen: Is there any way in which I can change the Default Lock Screen so that it includes a message on it like "This phone belongs to _______"?
Is there any other themes for the Text Message "Puzzle" Lock Screen?
17. Contacts:
a) Sorting Method - First I would like to sort my contacts by Group, then by Alphabetical Order. Is there any way that I can do this? Basically I want my girlfriend listed first, then all my Family Contacts, then all my friends. Is there a way I can do this other than adding symbols or prefixes in front of everyone's name?
b) Once while on the facebook app, it gave me the option to set a picture to one of my contacts(without saving the image to the phone), however I havent figured out how to do it since, does anyone know how?
c)How do I sync contacts with Gmail? Ive tried clicking Sync Contacts in Contacts under Gmail, and it shows the refresh icon for about a second but when I go to my gmail contacts, nothing is there. What's the deal?
18. Way too Awesome: So we've all seen what phones can do in the movies, hacking into computers and whatnot. Is there anything that our phones can do like in the movies? I personally would love to have a phone that Tony Stark or Sam Flynn would die for. ......Is there at least a way I can use my phone to unlock my car? I'd enjoy turning my phone into a trapper-keeper lol.
19. Custom Sound Settings: Media Volume can only go down as low as 5% before going to 0%, is there any way I can make my phone lower that 5% like when it's late at night but I still want to hear an app's crappy music, just really really quietly?
20. Phone Accessories:
What is the Best phone case for Captivate that utilizes a belt clip (w/screen protector)?
In terms of a 2nd battery, are there any batteries out there that have more battery life than the stock one that comes with the phone?
If I had a 2nd battery, would it be safe to leave it in my car throughout the year in case I need it, or would temperature be a problem?
21. Data Plans: Any chance of AT&T Coming out with a plan that's between 100Mb, and 2Gb?
I'm on Wifi most of the time, so I don't use most of my 2Gb, but I can easily use 100Mb, is there any chance of there being a 1Gb plan?
As I get answers to my questions, if the answer isnt too long I will edit the OP with the answers or link a post below the question for people who might stumble upon this thread with the same question.
EDIT: (Last Edited 1/17)
Added Answers to questions: 1, 2, 4, 5, 9
Added Parts B and C to #6
Added Questions: 15,16,17,18,19,21
1.) IMEI ID is on the back of the phone and don't think you can change that.
4.) Astro also lets you install third party apps that are loaded onto your SD card. My files just lets you browse.
5.) If you dont' need daily breifing, don't use it. I don't use it either.
6.) PDAnet will let you tether via USB and there are a few others.
10.) when you add a app to your home screens, you have the option to change the name. Doesn't help with your app drawer OCD but keeps your home screens under control.
11.) There are multiple threads about random shutdowns. Read them all if you want. So far, increasing the sleep speed minimum to 2000 (in setCPU) has worked for me. Granted it's only been a few days but no shutdowns since doing that.
14.) Reading all the GPS threads will show you that it's not locked into a particular OS. Nobody really knows what the problem is. Some have great GPS, some don't. Some get it working better with fixes, some don't.
axis01 said:
1.) IMEI ID is on the back of the phone and don't think you can change that.
4.) Astro also lets you install third party apps that are loaded onto your SD card. My files just lets you browse.
10.) when you add a app to your home screens, you have the option to change the name. Doesn't help with your app drawer OCD but keeps your home screens under control.
11.) There are multiple threads about random shutdowns. Read them all if you want. So far, increasing the sleep speed minimum to 2000 (in setCPU) has worked for me. Granted it's only been a few days but no shutdowns since doing that.
Click to expand...
Click to collapse
4. My Files has a package installer if you have enabled sideloading of apps and seems to work the same as ASTRO as far as I can tell.
10. I havent seen an option to change the name on the homescreen either, I usually just drag them from my app drawer though.
11. Could you define what the sleep speed minimum is?
EDIT: ANd big thanks on where the IMEI was. I was kind of avoiding taking the battery out, but the number on the back matched the number in the phone info so I was happy. And for some reason my phone now works with exchange. I think my phone was waiting till I knew what it knew lol.
Oh man. I'll see if I can answer them all. LET'S DO THIS!
1. Before you left 2.1 stock, shoulda backed up nv_data. If your Device ID and produce code get messed up, check out http://forum.xda-developers.com/showthread.php?t=881162 and http://forum.xda-developers.com/showthread.php?t=880223 Use these threads to try and restore it; but if that doesn't work you might be SOL without a nv_data backup.
As for exhange, check out http://forum.xda-developers.com/showthread.php?t=821297
I work for AT&T, so me and IMEI's are best buds. You can't change your IMEI as it's a number issued directly for AT&T. AT&T uses these IMEI's to determine what type of phone is on your account. Should you change the IMEI, it would appear to AT&T as "Unknown GSM", and you would cease to get data.
2. Read #1
3. It depends on the apps you use to accomplish said tasks. I would imagine very few of us use the stock e-mail client, i would imagine most of us use K-9 or something along those lines, in which case you can specify a sound file in said apps settings.
As for having them show up in the default menu, throw them into /system/media/audio/ringtones and they should show up in default.
I'm not sure about the reminder, although I can't see an app for this not existing. As stated above, some e-mail clients such as k-9 or SMS like handcent may have this feature. If the stock ones don't, what can ya do?
4. Don't get either, get Root Explorer.
5. If you already have a clock, I suppose all Daily Briefing offers is news and a calendar. There's plenty of awesome news readers for the Captivate. If you like the widget variant, i would go with Feedr. If you prefer non-widget news readers, Google Reader, gReader, NewsRob; all good choices.
6. It depends on the ROM. USB Tethering can be accomplished through apps like EasyTether or PDANet, but most ROM's for the captivate do have it standard. It would be under Menu > Settings > Applications > USB Settings > PC Internet.
7. Latitude is bundled in with Google Maps. Not sure how to remove it, or if you can..maybe.
8. You don't need it. It's just a global way to share pictures and videos to multiple sources. I never use it.
9. Connect to WiFi!
10. Aside from decompiling the APK, i don't think so. Maybe NinjaMorph can do it, but I don't think so. You can hide apps from the drawer though, or hide the text, with alternative launchers.
11. The captivate stock firmwares seemed to have a problem with randomly rebooting. I work at AT&T and I sell these phones daily so I can safely say it's just the stock, even the 2.2 stock seems to do it. You can use SetCPU profiles to work some magic, but it's easier to just install a Custom ROM, as I personally no longer have this problem UNLESS i am on stock. Use http://romkitchen.org from your phone, easiest way. Make sure to donate if you use it frequently, it's an awesome service!
12. Can't answer this one. I imagine there's an app to back up texts to files on the phone directly though, if not it wouldn't be very hard to make!
13. From your contacts on the phone, menu > (possibly More) > Import/Export. It will save EVERYTHING about your contacts(Ringtone info, pictures, birthdays, etc) to a .vcf file. These can be altered, edited and saved on the computer.
14. 2.2 stock needs a fix I'm pretty sure. Check out this thread http://forum.xda-developers.com/showthread.php?t=881941 , all you gotta do is flash one file, so do it anyway just to be safe!
Phew. Hope this helps!
geokhentix said:
Oh man. I'll see if I can answer them all. LET'S DO THIS!
Click to expand...
Click to collapse
Big thanks
As for my Android ID, I didnt know about it until afterwards. The posts that inform people about flashing and Rooting should mention this, because I didn't see it anywhere until after I was worrying about my phone not being able to connect to my email, but for some reason this morning when I tried it miraculously worked.
As for #3, where is my system folder? is it: I:\media\audio\ringtones ?
with my "system" being "I:"
I recently discovered setting custom sounds for my email accounts, but I am curious about all the default tones.
Are all the ones listed in different setting all just the same file with the exception that they only play for "X" amount of type depending on menu your are in?
And can the captivate not play MIDI files?....you know, old school polyphonic files........
And how the heck do I change the text tone for while my phone is plugged into the USB? omg it is the most annoying sound in the world, why does it not use the tone I have my texts set for? (I forgot this one on my list)
Thanks for your answer to #11. My phone hadnt done it at all until I dropped it down about 10 feet at a concert screen down 6 days after I got it. The next day the phone did the reset thing and I just about cried cuz I was just like I know it's because I dropped it. On the bright side when I picked it up after it fell, it didnt have a scratch on it or nothin'.
How do you alter a .vcf file?
WandererTJ said:
Big thanks
As for my Android ID, I didnt know about it until afterwards. The posts that inform people about flashing and Rooting should mention this, because I didn't see it anywhere until after I was worrying about my phone not being able to connect to my email, but for some reason this morning when I tried it miraculously worked.
As for #3, where is my system folder? is it: I:\media\audio\ringtones ?
with my "system" being "I:"
I recently discovered setting custom sounds for my email accounts, but I am curious about all the default tones.
Are all the ones listed in different setting all just the same file with the exception that they only play for "X" amount of type depending on menu your are in?
And can the captivate not play MIDI files?....you know, old school polyphonic files........
And how the heck do I change the text tone for while my phone is plugged into the USB? omg it is the most annoying sound in the world, why does it not use the tone I have my texts set for? (I forgot this one on my list)
Thanks for your answer to #11. My phone hadnt done it at all until I dropped it down about 10 feet at a concert screen down 6 days after I got it. The next day the phone did the reset thing and I just about cried cuz I was just like I know it's because I dropped it. On the bright side when I picked it up after it fell, it didnt have a scratch on it or nothin'.
How do you alter a .vcf file?
Click to expand...
Click to collapse
I agree, all Custom ROM threads should have a little blurb about it for people installing their ROM from a new stock device. But it seems to be fixable even if you didn't with a little work, so it's not too bad.
You can use Root Explorer to copy them to /system/media/audio/ringtones, but I think they may have to be in .ogg for them to work out of this directory. I'm not entirely positive, but all you would have to do to test it is push a non-.ogg ringtone over and try it. To copy your ringtones over nice and easy like;
Download the Android SDK and extract the android-sdk-windows folder to your desktop for easy copy pasta!
And enable USB Debugging (Menu > Settings > Applications > Development > USB Debugging)
Open a command prompt!
cd %USERPROFILE%/desktop/android-sdk-windows/tools
adb push [ringtone] /system/media/audio/ringtones
Click to expand...
Click to collapse
that's in a perfect world where it won't complain about permissions. if it does;
cd %USERPROFILE%/desktop/android-sdk-windows/tools
adb push [ringtone] /sdcard/
adb shell
su - at this point, accept superuser request on the phone; make sure the screen isn't locked when you hit enter, prompt should change from a $ to a #
mv /sdcard/[ringtone] /system/media/audio/ringtones/
exit
exit
Click to expand...
Click to collapse
I'm not sure if the Captivate can play .MIDI files for notification sounds. Only one way to find out though, right?
And i have no idea why your text tone is different when plugged into USB...mine sounds the same.
Late edit: forgot to answer one of em, you can edit .vcf files in MS Outlook!
# 9 - unfortunately our phone doesn't have FM radio. Another one to try is iheartradio. They have a number of radio stations. Although you're still using data unless you're using wifi like mentioned above.
Are there any better phonebook editors other than Outlook express?
I am looking for something so that I can have multiple phonebooks such as one with all my contacts I've ever had, and another for just the contacts I want on my phone
if you have a custom ringtone set for something and you have the phone plugged into usb, the phone can't access the the SD card where the custom tone is stored, thus you get that annoying (and loud) built in tone.
Re: myfiles: it does indeed let you install apps, but I'd recommend estrongs file explorer. It allows you to not only browse you're phone, but your pc files too (assuming it's on the same network, of course.) And let you open, copy and edit between the 2 devices.
Re: allshare: out of the box this great app let me browse and watch all of the video files off of my PC. I didn't have to configure anything special, except that my PC was already configured to share media with my xbox 360.
But I didn't do anything on my pc after buying the phone. Just connected to wifi and everything showed up. I haven't tried sharing the other way though (watching media from my phone on my PC)
Sent from my SAMSUNG-SGH-I896 using XDA App
#12. I've used Wifi Android Manager Wifi, I think it backs up text messages. It seems to back up everything else, that's for sure.
Hey, I've been working on adding answers to the OP, it's going, but I'm not done
Anyways, UPDATE 1/17/11 - I've Added Questions 15-21, please try and answer these when you get the time.
Added Answers to questions: 1, 2, 4, 5, 9
Added Parts B and C to #6
Added Questions: 15,16,17,18,19,21
I am in no way attempting to take credit for this program or any profiles created unless my name is annotated next to a published link. Support these guys buy buying their app(s) as this is a tremendous backend for amazing automation for today and the future.
In an effort to help everyone new to Tasker (and its associated apps like AutoRemote) and its capabilities, I'm starting this thread to list profiles that people are actively using on their gear.
What is Tasker?
Tasker is an application for Android which performs tasks (sets of actions) based on contexts (application, time, date, location, event, gesture) in user-defined profiles or in clickable or timer home screen widgets.
What are some of the things I can use these apps for?
While the number of uses for Tasker is limitless and only supressed by your imagination, here is a list of published tasker profiles that people have created for common yet out of the box thinking type usage: Tasker Profiles
Here are only some of the things you could do with Tasker, it's real power is the flexibility to combine contexts and tasks however you wish.
passcode-lock sensitive applications (e.g. for child safety)
change phone settings by
*application: long screen timeout in a book reader
*time: screen brightness lower in the evening
*location: ringer volume high at the office, turn off ke yguard at home
wake up with a random song from your music collection
Text-to-speech; read out loud: incoming SMS/ phone number, WiFi/Bluetooth status, when it's time for an appointment, when the battery is low etc etc (Android OS 1.6+ only)
launch a music application when your music SD card is inserted, otherwise a file browser
start the day with a particular application showing
change all your home icons and wallpaper every day, or in particular locations
turn the phone upside down to return to the home screen, tilt 90 degrees to the left and back to toggle speakerphone during a call
create a Home widget to
*toggle bluetooth/wifi on/off
*launch wireless settings dialog
*show a menu of tasks to choose
*send an emergency SMS with your GPS location
remap camera etc buttons to other applications, or show a menu of applications and/or actions
zip/unzip application data on the fly when an application is launched/exits
pause music playback while in a particular application, restart on exit
change the Home icon for any application
take a time-lapse photo series (possibly 'secretly')
make a regular backup of a file on the SD card
track your phone location via SMS in case of theft
extend the use of the media button on your headset: take a picture from a distance or go to the previous media track with a long press
record call times and destinations to the SD card
show a popup when an SMS arrives from a particular phone number
setup a birthday SMS to be sent months before it happens so you don't forget
record battery levels over time to a file on SD card
make automatic recordings of what you say during phone calls to SD card
during the night, turn on airplane mode to conserve battery/reduce radiation, but turn it off every 15 minutes to check for SMS/voicemail.
setup a vacation SMS message, with different messages for different callers
launch a music application when headphones are connected
Guides and Tutorials
OG Development Site for Tasker for Android
Massive amounts of reading material/guides
Tasker 101 Help Videos - by hollywoodfrodo
Tasker Profiles
Auto Bluetooth/Internet Tether - App Trigger Method - Props to Brendo.
Auto Bluetooth/Internet Tether - Screen On/Off Trigger Method - Props to st-tps
Please drop a note in the thread or PM me with your Profiles and/or Instructions. This is thread is to bring the power of Tasker on the gear to a single place. Thread links/files/guides all welcome.
Cool
Here's one that I've been using:
http://forum.xda-developers.com/showthread.php?t=2542050
Recommended companion app: AutoRemote
What we really need is an update to Tasker to allow exporting...
I would love if this thread develops and thank you for starting it...i am trying to learn how to use tasker to get weather widgets to read weather from stock weather widget.....F0mey said you needed SQlite which i have and tasker...but im lost from there
It has taken me the better part of 4 days to get mine set up for voice automation. I know I've barely gotten started but I can now give a voice command to the gear and have it open Pandora and adjust the volumes on the phone. Then pause Pandora and readjust the volumes with another command. Think entering and exiting your car. Having this core structure in place, I think as I move to a full home automation plan, I will be able to integrate it with no problems.
Tasker, Autovoice, and Autoremote are all required. When I get a little more time, I'll try to decompress all that I learned over these 4 days to create a tutorial.
In the meantime, if you search autovoice and autoremote on Youtube, you can find some great assistance. Armando Ferreira has some great tutorials that really helped me get to where I am (and pushing me to where I want to be).
I was hoping someone can help me with what I am trying to do. First I'll explain what I want and then show screen shots of what I tried. So basically I want my weather info to be set for UCCW widgets and it seems u need tasked and sqlite to do so. And no null has sqlite support so I'll show u what I've done.
I know I'm probably totally off but can anyone tell me if I'm close or help
Sent from my SPH-L720 using xda app-developers app
Great Job with the OP #WellDone
Sent from my SM-N900P using Tapatalk
Bump. Added new Bluetooth Tether method by st-tps. Please give them props and if you have any profiles you have created please share!
Do you have to have an internet connection on you Gear for the initial Autoremote setup? I really just need the bluetooth connection to my phone to send intents to trigger tasks from there. I've googled the crap out of it but keep coming to the same posts. Thanks!
snowmangoh said:
Do you have to have an internet connection on you Gear for the initial Autoremote setup? I really just need the bluetooth connection to my phone to send intents to trigger tasks from there. I've googled the crap out of it but keep coming to the same posts. Thanks!
Click to expand...
Click to collapse
I'm having the same issue. I can get autoremote to send through BT occasionally but not consistently.
I also have trouble with autovoice offline. Sometimes it works, sometimes not.
Sent from my SPH-L720 using Tapatalk
cvondra said:
Bump. Added new Bluetooth Tether method by st-tps. Please give them props and if you have any profiles you have created please share!
Click to expand...
Click to collapse
Nice thread, everyone can take use of the Tasker Power!
And thanks for the prop
When I double tap Nova, I use AutoVoice recognised Profile on Gear to send an autoremote message to the phone.
When the phone receives the message, it opens my Spotify playlist, and starts playing,
It also uses intents within Spotify to open the now playing window
Sent from my GT-N7100 using Tapatalk
Has anyone found way to activate/deactivate motions with tasker at a given time?
I use to turn it of when i go to bed to save battery
sent from my carrier pidgeon
pzayx said:
Has anyone found way to activate/deactivate motions with tasker at a given time?
I use to turn it of when i go to bed to save battery
sent from my carrier pidgeon
Click to expand...
Click to collapse
just what motions are you doing in bed exactly???
do you "sleep" with your watch on?
Wahaha! Nothing like that mate, but do you lay completely still when you are trying to sleep? Yes i sleep with the watch on because i am using the alarm feature and it works really good
sent from my carrier pidgeon
vibrate & ring
Any of you tasker experts know how trigger an event on an incoming call on the Gear? I've tried Event --> phone ringing, and it doesn't seem to trigger anything when I get a call. I was thinking maybe there's a way to do it with Intent Received, but I don't know which intent...
I wanted the gear to play a ringtone once when I receive a call (while the gear is set to 'vibrate')
I can achieve this using Autoremote. The phone ringing event works on the phone itself, so I had Autoremote send a message "RING" to the gear, and the gear received this and played the ringtone... it wasn't really a good way to do it, and wasted battery because I had to keep the Autoremote bluetooth listener on.
lopan2000 said:
Any of you tasker experts know how trigger an event on an incoming call on the Gear? I've tried Event --> phone ringing, and it doesn't seem to trigger anything when I get a call. I was thinking maybe there's a way to do it with Intent Received, but I don't know which intent...
I wanted the gear to play a ringtone once when I receive a call (while the gear is set to 'vibrate')
I can achieve this using Autoremote. The phone ringing event works on the phone itself, so I had Autoremote send a message "RING" to the gear, and the gear received this and played the ringtone... it wasn't really a good way to do it, and wasted battery because I had to keep the Autoremote bluetooth listener on.
Click to expand...
Click to collapse
I think you may need to find out what 'app' opens. Perhaps dialer? And trigger on app start as it doesn't seem to use the actually phone capabilities of android
Sent from my GT-I9505 using XDA Premium 4 mobile app
Brendo said:
I think you may need to find out what 'app' opens. Perhaps dialer? And trigger on app start as it doesn't seem to use the actually phone capabilities of android
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried dailer ... didn't work Doesn't see like there are any other apps on the tasker app list that would apply to incoming calls. That's why i was thinking there was an intent or something else that could be monitored.
I have a simple one for alerting of Whatsapp messages (got sick of watch constantly alerting on group messages). Essentially it triggers a notification, then hides it
Make sure Tasker is set to send notificiations in Gear Manager
Make sure Tasker is turned on in Accessibility services
Profile: Notification Whatsapp
Cooldown: 5mins
Event: Notification
Owner Application: WhatsApp
Task: WhatsApp Message
1. Notify
Title: Whatsapp
Text: Message Received
Icon: [Can be anything, as doesn't show up anywhere]
2. Wait
Seconds: 5
3. Notify Cancel
Title: whatsApp
Further ideas:
- Display content (requires sqlite3)
- Only display for group chats
- Repeat alerts
UPDATE:
I use WhatsTasker for more detail. https://play.google.com/store/apps/details?id=net.zhdev.whatstasker
Available on Google Play Store
It's an android app, will need Null Rom on the Gear
Available on Google Play Store
https://play.google.com/store/apps/details?id=com.preiss.swapps.link
Beta version with more features:
https://plus.google.com/+CyrilPreiss0/posts/YrNDXdk2GLf
SWApp Link is intended for use with Smartwatches running Android OS.
Some compatible Smartwatches:
Samsung Gear 1 (with android ROM), Omate TS, AI Watch, Neptune Pine, Inwatch Z, AW-414, AW-420, Callisto 100.
Features:
Call Notifications:
• Displays the caller’s photo.
• Option to take the call, reject the call, or reply via SMS (composed on the watch and sent through the phone.)
• During call: options to end the call, toggle mute, and toggle the loudspeaker.
SMS Notifications:
• Displays the SMS text and contact photo.
• Option to reply via SMS.
App Notifications:
• Displays notifications, from the apps of your choice, on the watch.
• Fully optimized notifications for specific apps (with more coming), including:
• Email - Notifications now display the email’s content instead of just displaying “[number of] New Emails”.
• Hangouts - Notifications now display the message content instead of just displaying “[number of] New Notification(s) from [name]”.
• WhatsApp - Notifications now display the full message content, even within groups, including the message’s text and image.
• Customizable notification layouts: choice of colors for the message text and the message background, option to automatically resize the message text based on its length, and more.
Full notification management:
• Browse through all the previous notifications (SMS and app), with the option to display the most recent ones first or the oldest ones first, search through them by text, and more.
Powerful clock engine which can be set as the watch's lockscreen. Many exclusive features, including:
• Both Analog and Digital watch faces.
• Smooth seconds hand with dynamic shadow.
• Unread notification indicator.
• Battery, 3G, and Wi-Fi indicators for both the watch AND the phone (with options to display the indicators side by side, or toggle between them by tapping on them.)
• On Screen Display (OSD) Modules including a stopwatch, timer, day timer, second time, date, next alarm info and more (the OSD is shown/hidden by tapping on the clock.)
• Option to choose the Font Color with the color picker.
• Choice of backgrounds.
• Choice of date formats (Mon. 20 June / 20-06 / 06-20 ...).
• Choice of hour formats (12H / 24H).
• Complex animations.
Call Log Sync: Displays the phone’s call log with the option to place a call or send an SMS to anyone on it.
Remote Call: Remotely place a call to one of your contacts, favorites or recently used numbers, or dial a number to call remotely.
Remote SMS: Remotely send an SMS to one of your contacts, favorites or recently used numbers, or input a number to SMS remotely.
Remote App Launch: Remotely launch apps on the phone.
Remote Clipboard: Send content from the phone to the watch’s clipboard.
Remote Media Control: Remotely control the phone’s media player from the watch and see track info.
Find My Phone: Remotely set off the phone’s or watch’s ringer.
Remote Battery info: Displays the remote device’s battery level (with a low battery notification option.)
Remote Lock: Remotely lock the phone from the watch (in case of loss, for example.)
BT Virtual Leash: Automatically lock the phone and display a notification on the watch if the BT connection is lost.
Remote GPS Location: Display the phone’s GPS coordinates on the watch.
Megaphone: Establishes a phone call between both devices and puts the remote on speaker (establishes a communication with people near the remote device, sim watches only.)
Microphone: Establishes a phone call between both devices (enables you to hear what's happening around the remote device, sim watches only.)
Connection methods:
Direct Bluetooth Connection
Push Notification - Uses an Internet connection to communicate between the devices. (disabled)
SMS - Sends and intercepts SMSs to communicate between the devices.
XDA:DevDB Information
SWApp Link Companion App, App for the Samsung Galaxy Gear
Contributors
cyrilp
Version Information
Status: Beta
Current Beta Version: 0.934
Beta Release Date: 2014-04-23
Created 2014-04-23
Last Updated 2016-01-14
Reserved 1
The gear with Null rom can do most those things anyway? Or am I missing something?
Sent from my SM-G900H using XDA Premium 4 mobile app
This could be useful for non-touchwiz phones, I suppose.
I may give it a go just to see what it can actually do.
--wait... "need internet connection on the watch" For serious?
A little confused myself. One part says Bluetooth supported and other part acts like both devices need Internet connection as in Gear tethered which drains much more battery on the gear.
I'm not interested in the actual "Notifications" as Gear Manager does this fine for me, otherwise, the other functions listed, GPS, battery status on other device, ect.. Yes, I would be interested but still confused as to my first comment/paragraph above as to how this works.
The internet connection "requirement" is for those smartwatches that do not have working BT, like every one of the Umeox x201 based smartwatches. The internet connection is also for doing things over long distances (think miles).
It does more than just notifications. I'm running Null and have been placing calls and sending texts using the Gear and leaving my Nexus One in my pocket, or the other room, the whole time.
Lokifish Marz said:
The internet connection "requirement" is for those smartwatches that do not have working BT, like every one of the Umeox x201 based smartwatches. The internet connection is also for doing things over long distances (think miles).
It does more than just notifications. I'm running Null and have been placing calls and sending texts using the Gear and leaving my Nexus One in my pocket, or the other room, the whole time.
Click to expand...
Click to collapse
Hrmmm, Interesting. I'll be having a look at this. Thanks!
---------- Post added at 12:23 PM ---------- Previous post was at 12:13 PM ----------
Ok have it installed on my S4. Problem. Can't get it on the Gear. In the Play Store it says not compatible with (gear) device so I can't use chrome extensions downloader either for some reason. And I'm tethered to the gear to access internet thru playstore directly and it's not listing on the gear to download???
Disregard, I got it downloading now with Chrome extensions, will transfer to gear and give it a whirl shortly.
Ok, I set everything up. Selected BT for connection on phone side's app. There is so setting for this on Gear Side's app. Entered devices names, ect... all it does is sit on phone side saying "Connecting". None of the features are doing anything.
h00rj said:
This could be useful for non-touchwiz phones, I suppose.
I may give it a go just to see what it can actually do.
--wait... "need internet connection on the watch" For serious?
Click to expand...
Click to collapse
this is for using without BT connection (for smartwatches that don't have bluetooth), it's not needed for direct bt connection.
Lokifish Marz said:
The internet connection "requirement" is for those smartwatches that do not have working BT, like every one of the Umeox x201 based smartwatches. The internet connection is also for doing things over long distances (think miles).
It does more than just notifications. I'm running Null and have been placing calls and sending texts using the Gear and leaving my Nexus One in my pocket, or the other room, the whole time.
Click to expand...
Click to collapse
you need to select BT on both the watch and the phone, then it will connect
cyrilp said:
you need to select BT on both the watch and the phone, then it will connect
Click to expand...
Click to collapse
On the Gear, the settings did not have a place to set a connection type unlike the phone's settings with the app. It started off with email. I even tried to scroll up and down and look all over for the settings for connection on the gear and it certainly wasn't there, at least for me.
i have uploaded the apk in download section as Gear might have difficulties getting it from playstore
Lokifish Marz said:
The internet connection "requirement" is for those smartwatches that do not have working BT, like every one of the Umeox x201 based smartwatches. The internet connection is also for doing things over long distances (think miles).
It does more than just notifications. I'm running Null and have been placing calls and sending texts using the Gear and leaving my Nexus One in my pocket, or the other room, the whole time.
Click to expand...
Click to collapse
Do you have the conncetion choice in your settings on the watch ? it's strange lazer9 is saying it's not there ?
cyrilp said:
Do you have the conncetion choice in your settings on the watch ? it's strange lazer9 is saying it's not there ?
Click to expand...
Click to collapse
Hold the phone! Literally , lol. I just uninstalled from gear and re-installed from the one you posted here in downloads and now I have the connection settings on gear. Now to re-install on phone side and go from there. :victory:
Update: Blah, now when I either set bluetooth on Gear or Phone, I get a force close on each device.
lazer9 said:
Hold the phone! Literally , lol. I just uninstalled from gear and re-installed from the one you posted here in downloads and now I have the connection settings on gear. Now to re-install on phone side and go from there. :victory:
Update: Blah, now when I either set bluetooth on Gear or Phone, I get a force close on each device.
Click to expand...
Click to collapse
i have uploaded a new version, could you try it ?
cyrilp said:
i have uploaded a new version, could you try it ?
Click to expand...
Click to collapse
WORKS! Finally able to connect to gear & phone and did a test by pressing battery icon on gear and it showed my Phone's battery level!
Super! Now to figure out what all I can do with this nifty app :highfive:
lazer9 said:
WORKS! Finally able to connect to gear & phone and did a test by pressing battery icon on gear and it showed my Phone's battery level!
Super! Now to figure out what all I can do with this nifty app :highfive:
Click to expand...
Click to collapse
Great !
Strange thing going on right now. On gear I pressed Battery Icon to get the info from phone and it says uptop that it's connected to my phone but nothing is happening after "message sent" dialogue. So I opened into the App on phone side and it's sitting up top saying "connecting...." forever.
Update: Went in on phone side and "Force Closed" the app in app settings. Reloaded it and it connected right up. Must be a quirk or something...
*SWApp Link dev update 0.934d*
*BT Virtual Leash*
You watch will help you not to loose or forget your phone !!
New feature will allow to get notified if the bluetooth link is broken.
User selected delay to trigger the alert.
Hi
This looks promising but i have a few issues and questions
First of all the App keeps Force closing on the watch (i'm running NUll_23)
but i have been able to connect it for a short while and can get SMS messages and the watch vibrates but the screen does not light up
What i wondered is that i want to replace the Samsung Notification system completely as i want to see more of the notification
on the screen than just a small excerpt, especially with Gmail and Email
do you think your app be able to do that down the line
thanks
*SWApp Link dev update 0.934e*
*Auto Lock*
In virtual leash feature, you can now enable "Auto Lock" feature which will set a password on your phone if the link is broken.
It's a low level action on the phone, so you'll be asked to enable Admin rights to the app.
You will be able to enable or not the broken virtual leash notification.
Hi, i'm disabled and only have the use of one arm, is it possible to completely control the g watch r using my voice ONLY?
I'd recommend going to an O2 store and testing out the Moto 360 (they'll have one for use on display, and the voice commands will be the same as the G-Watch R), so you can get a feel for it. You can do a lot of stuff with voice, but not 100% of stuff. For example, I don't think you can change the song playing via voice.
Changing songs via voice doesn't matter too much really, is there anything else you can think of
Many, many... thing can no do with voice
Ex : OK Google Show alarm -> Ok it open alarm window, but..... you need to swipe to close window.
Ex : Ok Google start Evernote -> Ok it open Evernote App but.... you must select item in Evernote menu to continue. Select "Find" with press "find" item and after you can say Note title to open it......
You must also swipe all Card in screen any time a card is displayed and you want look at the clock face.
And............................
PAULRYAN52 said:
Changing songs via voice doesn't matter too much really, is there anything else you can think of
Click to expand...
Click to collapse
Come to think of it, dealing with notifications might just be a no go :/ It really depends on what your use case is for the device. If it's for sending texts and emails via voice, you'll be fine. But notifications and apps, that might be a struggle. Android Wear should be getting an update soon, so that might change!
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Missing features.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
Click to expand...
Click to collapse
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
Phone calls? No. I believe this is a common issue, there is no phone hardware onboard. Though I'm not that familiar with that feature.
Email and other task could be handled with Autovoice if Google app can not. Again, not that familiar.
For me, the main missing feature was choice of navigation app. Nav questions will only launch GMaps, newer version can launch Waze or your nag app choice, by default.
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Thanks for your comment. I tried your solution and its working better, i still get some errors time to time, but is much better...thanks
[
aledesma said:
Hi, Does your okay google now allow you to make phone calls, send email etc.... what features are you loosing out by going this route. Thanks!!!!
Click to expand...
Click to collapse
If you have a phone connected via BT you can make phone calls using OK Google.
Tumke32 said:
Hi,
I'm wondering if some of you KLD / KLG / MX / etc unit owners are using google voice commands. I can't use it properly on my unit, it crashes all the time. Sometimes it works, but usually it crashes. I'm using Malaysk rom. Is there anybody who can you use google voice without any problems? Or is there a simpel solution to fix my issues? I'm using a external mic connected with a jack to the backside of my unit.
Click to expand...
Click to collapse
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
newt_dunbarton said:
I've read some posts in the Malaysk ROM thread and many people have modded their units by opening them up and re-runing the internal mic. It's that mic, not the external, that is used for voice commands and apparently it is an unshielded wire that allows for a lot of interference and therefore unreliable google voice. I'm still foggy on the voice dialing but someone somewhere got this to work but not through the native bluetooth app. I think I read that they used the RK3066/Rk3188 app in the google play store or something...I'm just getting started with my unit and it's not even installed yet. Hopefully some of this was insightful for you.
Click to expand...
Click to collapse
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Can you elaborate on this process please?
carter.w.jason said:
I have spent a lot of time with this issue. My views are that the OEM version of the Google app is the only stable version(for voice use) for these HUs. My JY solution was to extract the Velvet.apk from the factory ROM. After updating to a Malsysk ROM, I replaced the pre updated apk back to the older factory version. You will lose out out on some updated features, but having a working voice command is nice tradeoff.
Velvet.apk, OEM JY Version
https://drive.google.com/file/d/0B0iQtPEIFgeHR3hQdGlvd2RrVUk/view?usp=sharing
Click to expand...
Click to collapse
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
aledesma said:
Did you go to file manager and replace the Malaysk version? Where is it located? or did you simply install with with apk instal app. Than you so much!!!!
Click to expand...
Click to collapse
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
shaiq123 said:
I am using the latest Malaysk ROM dated 10th January 2016 for RK3188 1024*600. It lets me speak Ok Google and Call (contact name) to the phone when after pressing the call button. The way it works for me is:
1. Whatever is playing on the unit, it stops when I press the call button on my steering;
2. It launches the unit's dial screen;
3. I say 'OK Google', it launches the ok google listener on the phone;
4. I say 'Call (contact name)' and it calls.
Few things I had to manage before this started working was:
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
2. Enable to XPOSED MTC in the XPOSED framework in the head unit;
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
Hope this helps.
Click to expand...
Click to collapse
Hi,
1. Enable the option to receive commands over bluetooth in Google Now settings in the phone;
Were can i find this option? I have a nexus 5 and i updated my google now, but there no option like that in google now. Or do you mean the option "bluetooth headset" under voice?
3. Change the setting to integrate with phone's google now interface (something like that) in XPOSED MTC module.
I can't find any options in Xposed MTC related to what you are writing. Are you sure this option is in Xposed MTC?
Thank you!!!
carter.w.jason said:
Uninstalled with Titanium Backup. Velvet.apk is located in /system/priv-app. Copy/Paste replacement Velvet.apk using Root Explorer. !!! Set file permissions to 644 with Root Explorer !!! Reboot.
Click to expand...
Click to collapse
I will give it a shot!!!
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Mr Bigglesworth said:
Hi there,
I to have been wondering about the best way to get voice dialling working and as my google voice crashes the HU more often than not, I think it is best to do this as shaiq123 has suggested by pressing the call button the steering wheel and then Ok Googling the phone to make the call.
But my phone goes to lock screen in the car and that stops this working. What I would like is that when my phone connects to the car bluetooth it
1) stops it going to lockscreen
2) activates wifi hotspot
3) activates 'ok google' if it is not normally activated
and it reverses on disconnecting.
Is this something easily done or do I need some kind of app to do this?
A final thing that would be helpful, is that it would be useful to give the play music command to direct the HU to play music from an HU attached SD card rather than the phone memory. Is there a way to also configure that (i.e. that the command would seek music stored on HU rather than phone first?)
Cheers
Click to expand...
Click to collapse
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
dc5daft said:
You could achieve the first part using Tasker, you would just create a profile to run your tasks that actives when your phone connects to the headunit. Its a great app for automating stuff like that.
Click to expand...
Click to collapse
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Mr Bigglesworth said:
Thanks - in fact this morning I have downloaded the trial for Tasker as well as Automate to see if they can do what I am looking for.
I've decided what would be really helpful would be if I could
1) Use app to detect when phone connects to car HU via bluetooth
2) Launch Wifi Hotspot
3) set the camera button to unlock screen and activate google voice
Now 1&2 look like its not too difficult and may even be doable using the Sony Smart Connect app (on a Z2, not rooted).
3 doesn't seem to be as instantly obvious. In tasker, I put in a new profile>event>hardware>button camera, also selected non beginner settings so could pit priority to highest and activate stop event, then put the task as launch voice search app - but it just keeps doing the camera?
Click to expand...
Click to collapse
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
dc5daft said:
Create a new Profile>State>Net>BT Connected then click the magnifying glass next to name and select the name of your headunit. This will mean whenever your bluetooth is connected to the headunit it will run the tasks associated with it. It will give you the option to name and create a task once you create your profile then create new>Net>WiFi Tether and set to On.
I have a Z2 as well and just tried the camera button as a profile and it didn't work for me either, you'll need to do some googling on that, not sure why it doesnt work. It's best to set a flash (Alert>Flash) in your task as a test to see if your task runs but I'm sure you need to need to have root to unlock the screen.
Click to expand...
Click to collapse
Thanks for this - and yes this where I had got to (which make me feel better!). And I too think the camera button may not be workable without root.
I think I need to change my plans and see if I can prevent the lockscreen to come on when connected to this bluetooth device. That way I can fall back to using ok google as the lockscreen prevents ok google from completing requests.
Okay - think I've done that and it was easy enough, now have a profile which when connected to HU through bluetooth does (1) set off wifi tether and (2) Set keyguard off. Then with (3) double tap to wake screen and (4) Ok google should be able to do what I need it to.
Last thing I'm wondering if you could do is to create a large voice dial icon (double normal size etc) on screen (in case initial ok google doesn't work)...