[Q] HTC One international not working - One (M7) Q&A, Help & Troubleshooting

Hey all. A some time ago I rooted my phone, unlocked bootloader, no S-OFF, and installed HD Revolution, 31.6 or something and it worked great for a good two months. But now my phone got jammed, I booted it and it doesn't work. Can't access recovery or start the phone, when I go to bootloader and try to go to recovery, it says entering recovery and boots again. I've tried to install multiple RUU's via fastboot method but it won't work. I always get the message remote: 24 parsing android info file. Tried to relock bootloader and then it gives the error 12 parsing android info file error.
So where to now? Can't get adb to work, tried multiple ways. It could've been the solution to boot to recovery? Can't boot to recovery via fastboot. Any ideas?

Have you tried reflashing recovery via fastboot?
Can you boot to recovery via fastboot with a recovery img file stored on your PC?

shaitan667 said:
Have you tried reflashing recovery via fastboot?
Can you boot to recovery via fastboot with a recovery img file stored on your PC?
Click to expand...
Click to collapse
I've tried reflashing multiple recoveries multiple times, and always did fastboot erase cache. Couldn't boot to recovery via fastboot command also, phone just jammed for 10minutes.
And I just figured out, I can't get adb working because I can't start my phone. Am I correct?

hessusi said:
I've tried reflashing multiple recoveries multiple times, and always did fastboot erase cache. Couldn't boot to recovery via fastboot command also, phone just jammed for 10minutes.
And I just figured out, I can't get adb working because I can't start my phone. Am I correct?
Click to expand...
Click to collapse
N o as long as it switches on you are fine boot into
You need the info in these threads, read carefully before you make any moves
http://forum.xda-developers.com/showthread.php?t=2365506
http://forum.xda-developers.com/showthread.php?t=2265618

L0rdNels0n said:
N o as long as it switches on you are fine boot into
You need the info in these threads, read carefully before you make any moves
http://forum.xda-developers.com/showthread.php?t=2365506
http://forum.xda-developers.com/showthread.php?t=2265618
Click to expand...
Click to collapse
As said, I can't get adb to work. I think the phone should be started for it to work, but as said, I can't start it. Only available to bootloader etc.
I just want to know why the recovery won't work, I've installed many recoveries many time, everytime it says entering recovery, and then just boots. And boots again for a million times, but what is the reason?
I'm trying to boot the recovery through fastboot, but the phone just freezes. Well I'll wait for 30min and we'll see if it works. I doubt.
Is there any Roms or RUUs I could install straight from fastboot?
So is the problem that I've got hboot 1.55? And I can't downgrade it because I can't use adb. Where to now? Anyone?

According to other One users, this problem occures, if a wrong version recovery is used. I've tried every CWM version for every HTC One, international, verizon, AT&T and so on including touch versions but none of them works. So can anyone help me? I can't use adb at all.Anything to do or should I throw it out of the window?

hessusi said:
According to other One users, this problem occures, if a wrong version recovery is used. I've tried every CWM version for every HTC One, international, verizon, AT&T and so on including touch versions but none of them works. So can anyone help me? I can't use adb at all.Anything to do or should I throw it out of the window?
Click to expand...
Click to collapse
Does anyone have any answers?

What is your fastboot getvar all output ? Remove imei/SN
Have you tried this?
Fastboot flash recovery recover.IMG
Fastboot erase cache
sent from my mobile device

According to other One users, this problem occures, if a wrong version recovery is used. I've tried every CWM version for every HTC One, international, verizon, AT&T and so on including touch versions but none of them works.
Click to expand...
Click to collapse
hessusi said:
Does anyone have any answers?
Click to expand...
Click to collapse
yeah .. if you flashed a cdma recovery on your GSM phone you probably killed the partition structure and it's not easy to fix.
Their are a couple of guys here that can do it, but it's way over my head, ... maybe @nkk71 will help you

hessusi said:
According to other One users, this problem occures, if a wrong version recovery is used. I've tried every CWM version for every HTC One, international, verizon, AT&T and so on including touch versions but none of them works. So can anyone help me? I can't use adb at all.Anything to do or should I throw it out of the window?
Click to expand...
Click to collapse
how about we start with a "fastboot getvar all" (only show us the first two characters of IMEI, MEID, and s/n) and also the link(s) of what you flashed.

nkk71 said:
how about we start with a "fastboot getvar all" (only show us the first two characters of IMEI, MEID, and s/n) and also the link(s) of what you flashed.
Click to expand...
Click to collapse
I installed all CWM recoveries for any HTC One.. verizon at&t, all of them. So I did only more damage huh? Well, let's see if you can help me now. Here's the info you asked: IMEI 35, MEID 00, s/n MB. That's all?

hessusi said:
I installed all CWM recoveries for any HTC One.. verizon at&t, all of them. So I did only more damage huh? Well, let's see if you can help me now. Here's the info you asked: IMEI 35, MEID 00, s/n MB. That's all?
Click to expand...
Click to collapse
no ...like this
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HTxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4314mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
C:\fastboot>fastboot reboot
rebooting...
finished. total time: 0.042s
Click to expand...
Click to collapse

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: MBxxxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4024mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
There you go.

hessusi said:
Hey all. A some time ago I rooted my phone, unlocked bootloader, no S-OFF, and installed HD Revolution, 31.6 or something and it worked great for a good two months. But now my phone got jammed, I booted it and it doesn't work. Can't access recovery or start the phone, when I go to bootloader and try to go to recovery, it says entering recovery and boots again. I've tried to install multiple RUU's via fastboot method but it won't work. I always get the message remote: 24 parsing android info file. Tried to relock bootloader and then it gives the error 12 parsing android info file error.
So where to now? Can't get adb to work, tried multiple ways. It could've been the solution to boot to recovery? Can't boot to recovery via fastboot. Any ideas?
Click to expand...
Click to collapse
I had this issue and is annoying how long it took to me fix. I had to try and get adb to work on several computers and eventually it did, from there I installed everything stock then unlocked the phone and root, install custom recovery and s-off with chosen rom. Now if you install twrp the latest version and sideload a Rom you will be good to go or get a usb otg. I was able to install custom recovery by adb but couldn't do anything else. I was able to sideload using twrp recovery in adb
Sent from my HTC One using XDA Premium 4 mobile app

hessusi said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: MBxxxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4024mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s
There you go.
Click to expand...
Click to collapse
Well you know how to flash recovery lets try one more time with the correct one.
Download this >>http://techerrata.com/browse/twrp2/m7ul
put it in your fastboot folder and md5 check it - f428caf36c9c337e2ae417fc10fbe165
if it's ok continue
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
after the last step use volume down to select bootloader then volume down to select recovery (power button to select)
can you get into twrp now ?

clsA said:
Well you know how to flash recovery lets try one more time with the correct one.
Download this >>http://techerrata.com/browse/twrp2/m7ul
put it in your fastboot folder and md5 check it - f428caf36c9c337e2ae417fc10fbe165
if it's ok continue
fastboot flash recovery openrecovery-twrp-2.6.3.4-m7ul.img
fastboot erase cache
fastboot reboot-bootloader
after the last step use volume down to select bootloader then volume down to select recovery (power button to select)
can you get into twrp now ?
Click to expand...
Click to collapse
No, didn't work. Instant power off when I press recovery. Tried again and it just keeps saying entering recovery... Aaaand a bootloop again. So same thing with this one. What's next?

hessusi said:
No, didn't work. Instant power off when I press recovery. Tried again and it just keeps saying entering recovery...
Click to expand...
Click to collapse
well maybe a RUU will rebuild your partitions
lets look, Go here and find the RUU that matches
3.62.401.1
PN0710000
HTC__Y13
http://www.htc1guru.com/downloads
Well after looking it seems without s-off your done
Try and get s-off with rumrunner

clsA said:
well maybe a RUU will rebuild your partitions
lets look, Go here and find the RUU that matches
3.62.401.1
PN0710000
HTC__Y13
http://www.htc1guru.com/downloads
Well after looking it seems without s-off your done
Try and get s-off with rumrunner
Click to expand...
Click to collapse
I thought that adb is unavailable if phone can't be powered on? Atleast I can't get it to work.. And I tried RUU and it was correct but couldn't get it to work.

hessusi said:
I thought that adb is unavailable if phone can't be powered on? Atleast I can't get it to work.. And I tried RUU and it was correct but couldn't get it to work.
Click to expand...
Click to collapse
actually adb works fine ...in recovery or booted phone

clsA said:
actually adb works fine ...in recovery or booted phone
Click to expand...
Click to collapse
I can't access recovery.

Related

I broke it, can you fix it?

I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
I did s-off since you're unlocked. Probably the issue. Then I would go into fast boot to either ruu or transfer a rom
I think rumrunner is what works on 1.55 hboot
Sent from my HTC One
krankenator said:
I've flashed multiple ROMS but I don't know what what's up now.
I was stuck on FTS Rom and couldn't flash any other ROMS- they wouldn't take. It would always reboot in FTS.
So in TWRP, I did an advanced wipe... everything was gone including the multiple various ROMS and backups in both TWRP and CLKmod. Trouble is, now I can get as far as flashing various new recoveries from the bootloader, but I can't push any rom to it or flash anything from the bootloader.
Extra kicker- I can NOT mount the phone on my computer. This has been the case for a while, not from any ROM. Not from FTS Rom, not from any recovery... can not mount the phone and transfer files.
HTC Dumlock also did not work.
Specs-
HTC One- unlocked, rooted, HBoot 1.55, S-On, Radio 4%.20.3218.13
Any help would be appreciated.
Click to expand...
Click to collapse
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
clsA said:
do you know how to use fastboot commands?
post your results from (minus your iemi and serial no)
fastboot getvar all
we can use this info to direct you to the correct RUU to fix your phone
Click to expand...
Click to collapse
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
krankenator said:
Not pro, but I hobble by. Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4T.20.3218.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4350mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
clsA said:
Edit your post to match mine.
you have AT&T phone here's the link to the RUU
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Edit: Keep in mind that resetting your phone with RUU is full wipe and starting from scratch
after it's done you will need to unlock bootloader, flash recovery and Root. Same as if your phone was brand new
Click to expand...
Click to collapse
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
krankenator said:
Thanks. I don't suppose there is a Mac version for this? I don't currently have Windows installed. If not, I"ll just have to fix this later.
Thanks for all your help.
Click to expand...
Click to collapse
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
clsA said:
yes here
http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb43_sense50_mr_cingular_us_3-17-502-3-decrypted-zip/
files needed >> http://forum.xda-developers.com/showthread.php?t=2390995
Click to expand...
Click to collapse
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
krankenator said:
Thanks for your help. Downloading the RUU now but before I flash this I just want to be clear.
Do I first need to S-Off using Rumrunner? I can't find a mac version, just Linux and Win.
Then do I need to re-lock my bootloader? (I read that step here http://forum.xda-developers.com/showthread.php?t=2251800)
Then at that point I can flash the RUU or can I just flash the RUU without S-Off or re-locking the bootloader
-rom.zip can be flashed using
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip (yes do this 2 times)
fastboot reboot
Click to expand...
Click to collapse
I don't think that file requires s-off
but yes a locked boot loader is needed
fastboot oem lock
Well, time to try something else.
Any ideas anyone?
krankenator said:
Something didn't work. It only reboot to the bootloader.
Pro-Mac-Jesseesktop jesse$ ./fastboot oem lock
Click to expand...
Click to collapse
FAILED (remote: 12 signature verify fail)
I'll take a guess this means you need s-off
or a windows PC to run the RUU.exe I posted first

[Q] Wiped OS and Wiped SDcard

Hello.
I have been trying to repair this by myself for 3 days reading this forum but I just can't do it.
My phone had unlocked bootloader, rooted and SOFF. When I was flashing a rom I don't know what happened but it deleted my OS.
Then I tried to update my firmware and it deleted my SD card. I'm stuck at TWPR recovery.
Now when I try to use a RUU installer it always shows an error, I also tried to use a RUU via fastboot command and it shows error 42. My bootloader is relocked btw.
I cannot sideload anything because my SD was wiped.
I'm now somewhat desperate. I just want my phone to revive.
My MODEL ID is PN0712000 and I got SuperCID 1111111
My firmware is version is 3.17.502.3.
PLEASE help me.
MsDosExe said:
Hello.
I have been trying to repair this by myself for 3 days reading this forum but I just can't do it.
My phone had unlocked bootloader, rooted and SOFF. When I was flashing a rom I don't know what happened but it deleted my OS.
Then I tried to update my firmware and it deleted my SD card. I'm stuck at TWPR recovery.
Now when I try to use a RUU installer it always shows an error, I also tried to use a RUU via fastboot command and it shows error 42. My bootloader is relocked btw.
I cannot sideload anything because my SD was wiped.
I'm now somewhat desperate. I just want my phone to revive.
My MODEL ID is PN0712000 This indicates your phone is AT&T or Developers edition and I got SuperCID 1111111
My firmware is version is 3.63.707.4.
PLEASE help me.
Click to expand...
Click to collapse
What Ruu did you try ?
and can you boot to bootloader and give me the results for
fastboot getvar all
minus your serial no and IEMI, I can help you much better with this info.
If you are s-off it should be no problem getting you up and running
clsA said:
What Ruu did you try ?
and can you boot to bootloader and give me the results for
fastboot getvar all
minus your serial no and IEMI, I can help you much better with this info.
If you are s-off it should be no problem getting you up and running
Click to expand...
Click to collapse
I'm trying RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2
These are my results from getvar:
C:\abd\platform-tools\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.072s
MsDosExe said:
I'm trying RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2
These are my results from getvar:
C:\abd\platform-tools\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.502.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4319mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.072s
Click to expand...
Click to collapse
Everything looks Good !!
Hold the power button and vol down till the phone reboots
continue holding just vol down back to the bootloader
then do
fastboot erase cache
fastboot reboot-bootloader
then to fastboot USB and start the RUU on your PC again (rebooting the PC before doing all this is a good idea also).(If your on windows 7 running the RUU as Administrator is good too)
Also check the md5 of the RUU you downloaded to make sure it's good
clsA said:
Everything looks Good !!
Hold the power button and vol down till the phone reboots
continue holding just vol down back to the bootloader
then do
fastboot erase cache
fastboot reboot-bootloader
then to fastboot USB and start the RUU on your PC again (rebooting the PC before doing all this is a good idea also).(If your on windows 7 running the RUU as Administrator is good too)
Also check the md5 of the RUU you downloaded to make sure it's good
Click to expand...
Click to collapse
I dit everything and the ruu installer keeps saying the same error.
"Error 155 IMAGE ERROR"
How can I check the MD5? Maybe that's the problem.
MsDosExe said:
I dit everything and the ruu installer keeps saying the same error.
"Error 155 IMAGE ERROR"
Click to expand...
Click to collapse
does the phone ever reboot to RUU mode ?
correct file and md5
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
clsA said:
does the phone ever reboot to RUU mode ?
Click to expand...
Click to collapse
When I run the installer it reboots in RUU Mode (the grey HTC letters) then it checks my phone, deletes my user data, and then it says "sending..." after that it fails and shows the 155 IMAGE ERROR and something about getting the right ROM.
How can I check the MD5? Maybe that's the problem.
MsDosExe said:
When I run the installer it reboots in RUU Mode (the grey HTC letters) then it checks my phone, deletes my user data, and then it says "sending..." after that it fails and shows the 155 IMAGE ERROR and something about getting the right ROM.
How can I check the MD5? Maybe that's the problem.
Click to expand...
Click to collapse
The post above yours
extract it to the desktop
go to the other link and copy the listed md5 for your ruu
then find you ruu in the bottom box and check it
if it's red you need to redownload
clsA said:
The post above yours
extract it to the desktop
go to the other link and copy the listed md5 for your ruu
then find you ruu in the bottom box and check it
if it's red you need to redownload
Click to expand...
Click to collapse
I got the wrong MD5 on the RUU. I downloaded the one you provided and my HTC One is back to life again.
Thank you very much. I have never figure it out without you.
MsDosExe said:
I got the wrong MD5 on the RUU. I downloaded the one you provided and my HTC One is back to life again.
Thank you very much. I have never figure it out without you.
Click to expand...
Click to collapse
I'm Glad your back up and running !!

No OS on HTC One And Stuck In bootloader

I have windows 7 and trying to put a custom rom back on my htc one because it was acidentally erased including the OS and only boots to an htc logo and goes no farther. I had twrp running just fine on it however now i tried to flash clockwork mod and it just hangs trying to go into recovery and stuck in a boot loop wont even allow me to flash back to twrp.....My main problem that no one can seem to figure out is i can never get adb devices to recognize my phone? am i typing this is the wrong spot? I would like to adb flash my custom rom to get my phone back up and running but cant seem to get it working ...any ideas anyone? My phone is listed as my htc under device manager however im at a stanstill on what to do. thanks for all your help
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 99000146194387
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4230mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
Tommyboy77 said:
I have windows 7 and trying to put a custom rom back on my htc one because it was acidentally erased including the OS and only boots to an htc logo and goes no farther. I had twrp running just fine on it however now i tried to flash clockwork mod and it just hangs trying to go into recovery and stuck in a boot loop wont even allow me to flash back to twrp.....My main problem that no one can seem to figure out is i can never get adb devices to recognize my phone? am i typing this is the wrong spot? I would like to adb flash my custom rom to get my phone back up and running but cant seem to get it working ...any ideas anyone? My phone is listed as my htc under device manager however im at a stanstill on what to do. thanks for all your help
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_wls
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
finished. total time: 0.044s
Click to expand...
Click to collapse
adb only works in:
* custom recovery or
* booted up ROM with USB debugging enabled
fastboot only works in bootloader
you have a Sprint model, have you checked the Sprint forum?
my guess is you flashed something for an m7_u/ul model and that's why you got stuck.
so get a Sprint recovery (make sure MD5 is correct), then reflash it:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
PS: please no double-threading, thanks
nkk71 said:
adb only works in:
* custom recovery or
* booted up ROM with USB debugging enabled
fastboot only works in bootloader
you have a Sprint model, have you checked the Sprint forum?
my guess is you flashed something for an m7_u/ul model and that's why you got stuck.
so get a Sprint recovery (make sure MD5 is correct), then reflash it:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
PS: please no double-threading, thanks
Click to expand...
Click to collapse
Can you provide a link for the sprint recovery?
cfclay said:
Can you provide a link for the sprint recovery?
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/m7wls
Seanie280672 said:
http://techerrata.com/browse/twrp2/m7wls
Click to expand...
Click to collapse
Thanks! How do you know which one to use?
cfclay said:
Thanks! How do you know which one to use?
Click to expand...
Click to collapse
Find the ROM you want to flash, make sure its for your device and read the instructions, it should recommend a version of recovery to use.

Bricked phone due to incorrect flashing

Hi,
It appears i have flashed recovery to boot partition (fastboot flash boot recovery.img) and now the phone is not booting up. I can access bootloader and fastboot.
Can i recover by flashing the correct kernel again? I have a Sprint HTC one, S-Off with unlocked bootloader.
Also, i am unable to boot into recovery despite flashing in the correct partition. It hangs at entering recovery. Tried cwm, philz and TWRP. Unable to flash RUU too. Getting erro120 - battery below 30% despite the battery being above 90%. Please advice what i can do to recover the phone.
Getvar as follows.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.04.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4257mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.077s.
RUU? I did this with an older HTC device and it did the trick
Sent from my HTCONE using XDA Free mobile app
killmastern3 said:
Hi,
It appears i have flashed recovery to boot partition (fastboot flash boot recovery.img) and now the phone is not booting up. I can access bootloader and fastboot.
Can i recover by flashing the correct kernel again? I have a Sprint HTC one, S-Off with unlocked bootloader.
Also, i am unable to boot into recovery despite flashing in the correct partition. It hangs at entering recovery. Tried cwm, philz and TWRP. Unable to flash RUU too. Getting erro120 - battery below 30% despite the battery being above 90%. Please advice what i can do to recover the phone.
Getvar as follows.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.04.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4257mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.077s.
Click to expand...
Click to collapse
Try flashing a boot.img? (fastboot flash boot boot.img)
StormyNight said:
Try flashing a boot.img? (fastboot flash boot boot.img)
Click to expand...
Click to collapse
Thanks!! It worked to some extent i think. I get the boot sound and then bootloop. Tried factory reset. Didnt help. I cant load any custom recovery. Always hangs at entering recovery. Triel flashing "Sprint_HTC_One_m7wls_5.03.651.3_RUU". Got error 171 and htc_fastboot.exe has stopped in step no 1. Any idea what i can do?
killmastern3 said:
Thanks!! It worked to some extent i think. I get the boot sound and then bootloop. Tried factory reset. Didnt help. I cant load any custom recovery. Always hangs at entering recovery. Triel flashing "Sprint_HTC_One_m7wls_5.03.651.3_RUU". Got error 171 and htc_fastboot.exe has stopped in step no 1. Any idea what i can do?
Click to expand...
Click to collapse
Flash the firmware first then flash the RUU.
majmoz said:
Flash the firmware first then flash the RUU.
Click to expand...
Click to collapse
Thanks!!! That worked. Booted into the ROM now. Much thanks.
Unable to flash any custom recovery. Stuck at entering recovery. Any solutions?
killmastern3 said:
Unable to flash any custom recovery. Stuck at entering recovery. Any solutions?
Click to expand...
Click to collapse
are you flashing the right recovery file for your phone and is your bootloader unlocked.
Aldo101t said:
are you flashing the right recovery file for your phone and is your bootloader unlocked.
Click to expand...
Click to collapse
Yes to both. Phone is s-off and unlocked. Flashes successfully too. Just doesn't enter recovery. Moreover, pc detects the phone as HTC one and Adb doesn't work at all. Tried many drivers and different pc's. Only fastboot works properly.
killmastern3 said:
Yes to both. Phone is s-off and unlocked. Flashes successfully too. Just doesn't enter recovery. Moreover, pc detects the phone as HTC one and Adb doesn't work at all. Tried many drivers and different pc's. Only fastboot works properly.
Click to expand...
Click to collapse
in settings under power make sure fastboot is unchecked there, all I can think of at the moment, hope you get it going.
only other thing I can think of is in fastboot type fastboot erase cache.
then reflash recovery
Aldo101t said:
in settings under power make sure fastboot is unchecked there, all I can think of at the moment, hope you get it going.
only other thing I can think of is in fastboot type fastboot erase cache.
then reflash recovery
Click to expand...
Click to collapse
Already did both. Didnt help. had this recovery and adb problem on 3.0... firmaware and also in the new 5.0.. firmware.. Unable to root. The sprint authentication in troubling me a lot since i dont use sprint.
killmastern3 said:
Already did both. Didnt help. had this recovery and adb problem on 3.0... firmaware and also in the new 5.0.. firmware.. Unable to root. The sprint authentication in troubling me a lot since i dont use sprint.
Click to expand...
Click to collapse
did you flash superuser.
Aldo101t said:
did you flash superuser.
Click to expand...
Click to collapse
Cannot get into recovery to flash su

[SOLVED]HTC one M7 - Not Starting - Issue while updating to Lollipop

I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
[email protected] said:
I have tried updating the htc one m7 to lollipop and during installation phone went into recovery mode. this is the getvar log from device. currently i have an unlocked bootloader.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.07.1540.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4116mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
can some one guide on how to proceed forward?
One more issue is im unable to connect the phone to laptop. i have tried installing a custom ROM.
Click to expand...
Click to collapse
its very easy to fix, all you have to do is run the dev edition RUU again to make sure everything is fully stock for the update to work, however, your real issue is the fact it wont connect to your laptop, why not ? whats it doing ? what does device manager say ?
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
[email protected] said:
Ok. Connecting to computer im least bothered. I need it to be up and running.
I have unlocked bootloader, installed TWRP 2.7.1.1. Where can i get the dev edition RUU? Can i just run it from system by connecting phone in fastboot?
Click to expand...
Click to collapse
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
[email protected] said:
Yeah, system is able to read commands from fastboot. So i have follow the 2nd part of the link above?
Click to expand...
Click to collapse
yes just the 2nd part as your already on dev edition, if it fails, you may have to download and install the firmware first, due to you running a custom recovery, you can find the firmware here, thanks to @alray https://www.androidfilehost.com/?w=files&flid=20283, you will want the 6.07.1540.2 firmware which matches your version main.
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
[email protected] said:
I have connected the device in fastboot and ran the RUU, but it failed saying Recovery, and then it exited the process on computer. But my phone is still in the same silver htc logo, does it mean its installing or it failed to install? And BTW how do i install that firmware and also there a few versions if the same firmware!
If you can help me with sorting out this it would be of great help!! Thanks in advance for all the help till now...
Click to expand...
Click to collapse
here you go, easy way, download this: https://www.androidfilehost.com/?fid=95897840722641610 rename it to rom.zip for ease
place it in the same folder as adb and fastboot on your computer, then open a command window there. first you need to get out of RUU mode, so type fastboot reboot-bootloader, your phone should return to the bootloader screen, then enter recovery on your phone, hopefully twrp recovery still, then type adb push rom.zip /sdcard/, takes a while but it will let you know when its done, it will look like its doing nothing whilst its pushing.
unplug your phone and flash the rom, select stock radio and stock recovery when prompted, when the phone starts back up, check for updates, as you are s-on your bootloader will need to be relocked to update.
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
[email protected] said:
Thanks man for the help.
let me try and install that thing. Need to know why to relock the boot loader? and how can i relock it?
Click to expand...
Click to collapse
just type fastboot oem lock with your phone in fastboot mode, if you need to unlock in the future, just use the unlock token again or goto HTC Dev to get a new one.
Can i locck it belore running RUU or flashing rom?
[email protected] said:
Can i locck it belore running RUU or flashing rom?
Click to expand...
Click to collapse
no, it needs to be unlocked for flashing the reset rom in order to use the custom recovery.
locked / re-locked for running RUU
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
[email protected] said:
C:\Users\USER\Desktop\OneDrivers_Fastboot\Fastboot>adb push rom.zip /sdcard/
error: device not found
Im getting this on pushing from recovery mode. How can i resolve this?
Click to expand...
Click to collapse
when your phone is in recovery, have a look in device manager, see what it says for your phone ?
Its not able to find my device properly. Attaching it
[email protected] said:
Its not able to find my device properly. Attaching it
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=52135024
See Question (2 in this faq post to fix your drivers
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
[email protected] said:
That worked great man!! I have pushed it to device and now installing.
Its been 10 mins and i can still see the Installing bar running with 0.00%.. Is it correct or abnormal?
Click to expand...
Click to collapse
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Seanie280672 said:
your computer needs to see the phone whilst the phone is in fastboot mode in the bootloader for anything to work, but the the updated lollipop RUU is here: http://forum.xda-developers.com/htc-one/general/guide-convert-m7-developer-edition-t2840311
Click to expand...
Click to collapse
Seanie280672 said:
no that doesnt sound right, has it done anything in aroma, like wipe partitions etc ?
Click to expand...
Click to collapse
I have choose to wipe partition. Shall i not?
[email protected] said:
I have choose to wipe partition. Shall i not?
Click to expand...
Click to collapse
yes you should, but has the aroma installer done that part yet is what im asking ?

Categories

Resources