I am no longer able to connect to the Internet via my home WiFi network. I am able to WiFi connect to the network without any problems, but when I try to use any application that accesses the Internet the phone looks for a GRPS connection. I do not have a data account attached to my sim as I live in Australia, and as far as that sort of thing go, we are a backwater…
The WiFi connection and access was previously working fine until I tried to disable the GPRS from trying to connect, as this would routinely bring up messages informing me that a GPRS connection could not be made. I do not know what settings I have changed but I cannot seem to reverse the situation.
I have soft reset a number of times, I have re-run the connection wizard, etc my current settings are as follows:
WiFi:
Wireless
Configure Wireless Networks –
.MyWirelessNetwork Connected
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: The Internet
This is a hidden network: unchecked
Configure Wireless Authentication-
Authentication: Open
Data Encryption: WEP
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
Configure Network Authentication-
Use IEEE 802.1x network access control: unchecked
EAP type: Blank
NetWork Adapters
My network card connects to: The Internet
Connections:
Tasks
Vodafone Internet Settings
General-
Vodafone Internet Settings
Modem-
Name: Vodafone Internet
Number: vfinternet.au
VodafoneInternet
Enter a name for the connection: Vodafone Internet
Select a Modem: Cellular Line (GPRS, 3G)
* no user name or password, because I don't have the service
Proxy Settings-
The network connects to the internet: checked
This network uses a proxy server to connect to the internet: unchecked
My Work Network
No connections have been set up here
Advanced
Select Networks
Programs that automatically connect to the Internet should connect using: Vodafone Internet Settings
Programs that automatically connect to a Private network should connect using: My Work Network
GPRS Settings:
PAP authentication
I do not know if this is all the info need to sort this out, but any advice would be greatly appreciated. I have done allot of customising and I really don't want to have to a Hard Reset. I can connect through all applications, if I am connected by USB.
Thanks
First you need to make sure your connection is set to use My Work Network as first priority. Next you need to make sure that the WiFi connection connects to WORK NOT the INTERNET. probably your problem, did the same thing on my 8125
Cannot access hidden Wifi / Non-broadcasting SSID with the HTC TyTn II Kaiser
KDKobes said:
First you need to make sure your connection is set to use My Work Network as first priority. Next you need to make sure that the WiFi connection connects to WORK NOT the INTERNET. probably your problem, did the same thing on my 8125
Click to expand...
Click to collapse
Hi there,
Can someone please help by advising me on how to overcome this problem.
If I broadcast my SSID, the device connects fine, but when I stop broadcasting, the device will show that the network is unavailable. I did check the "This is a hidden network" checkbox option, in the settings.
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: Work
This is a hidden network: CHECKED
Configure Wireless Authentication-
Authentication: Open
Data Encryption: WPA2-PSK
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
Please help,... many thanks!
Kind regards,
JonD
My device is the HTC TyTn II (Kaiser) running Windows Mobile 6 Professional
Hi there,
Can someone please help by advising me on how to overcome this problem.
If I broadcast my SSID, the device connects fine, but when I stop broadcasting, the device will show that the network is unavailable. Even though I did check the "This is a hidden network" checkbox option, in the settings.
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: The Internet
This is a hidden network: CHECKED
Configure Wireless Authentication-
Authentication: WPA2-PSK
Data Encryption: TKIP
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
Please help,... many thanks!
Kind regards,
JonD
My device is the HTC TyTn II (Kaiser) running Windows Mobile 6 Professional
Additional information about my WiFi Router:
I'm using a D-Link DI-524 wireless router that I set as a hidden network (disabled SSID broadcast).
I also enabled the MAC filtering, and of course the device's MAC address is already added to the approved list for connections, so I think there is no issue with the router or network (like I mentioned before, when I enabled the SSID broadcast all devices connect perfectly and all is good, but when I disabled the SSID broadcast, the Kaiser & the vista laptop will say the network is unavailable and can't connect).
No problems with connections at all with my other laptop that runs on XP.
Stupid question...but are you able to connect to the network with another devcie. Also have to tried running a third party program that can scan for wireless AP's from the device.
And can you connect to any other hidden network..
It might be in a really good hiding spot.
JonD said:
Hi there,
Can someone please help by advising me on how to overcome this problem.
If I broadcast my SSID, the device connects fine, but when I stop broadcasting, the device will show that the network is unavailable. Even though I did check the "This is a hidden network" checkbox option, in the settings.
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: Work
This is a hidden network: CHECKED
Configure Wireless Authentication-
Authentication: Open
Data Encryption: WPA2-PSK
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
Please help,... many thanks!
Kind regards,
JonD
My device is the HTC TyTn II (Kaiser) running Windows Mobile 6 Professional
Click to expand...
Click to collapse
Somethings wrong with what you posted. WPA2-PSK is a form of authentication, and it would use either AES or TKIP as it's method of encryption. There is no such thing as a WPA, open network (WEP, open yes, but not WPA).
gwnorth, thanks for pointing that out.... the following is the correct configuration:
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: The Internet
This is a hidden network: CHECKED
Configure Wireless Authentication-
Authentication: WPA2-PSK
Data Encryption: TKIP
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
As for the other questions (for Arlop & ChumleyEX), I've got no problems connecting to my non-broadcast SSID network with my laptop running XP.... but I face the same problem with my other laptop that runs on vista.
of course, when I enabled the SSID broadcast, everything connects fine (the Kaiser and the vista laptop).
If anybody faced this similar problem and knows a solution, please let me know. Appreciate your help in the matter.
What is the point to have the system acknowledging that the network is hidden or not (checkbox option "This is a hidden network:" CHECKED or UNCHECKED ), but still fail to connect to it.
cheers,
JonD.
I'm not sure if this will help ...
I'm using a Netgear wireless router provided by my company which is set to an hidden network.
To set up access via my Kaiser I enter:
Setting > Connection > WiFi > Add New ...
Network name > Mynetworkname
Connects to > The internet
Hidden network > Checked
Authentication > Open
Data Encryption > WEP
The key is automatically provided > Un-Checked
Network Key > ****************************
Key Index > 1
What you haven't mentioned, but something that I needed to do ... The router needs to know my PDA mac address to allow access in its settings to support authorisation.
Since our IT department control the access rights (unless you have the password ), I do not know if the mac address information is a company protocol or part of a 'hidden network' setting.
PS. I always keep the WEP key in a text file on the PDA to copy and paste, because it's too troublesome to type it out each time I change the ROM's and have to set it up again.
I hope this helps.
JonD said:
gwnorth, thanks for pointing that out.... the following is the correct configuration:
Configure Wireless Network-
Network Name: MyWirelessNetwork
Connects By: The Internet
This is a hidden network: CHECKED
Configure Wireless Authentication-
Authentication: WPA2-PSK
Data Encryption: TKIP
The Key is Automatically Provided: unchecked
Network Key: **********
Key Index: 1
As for the other questions (for Arlop & ChumleyEX), I've got no problems connecting to my non-broadcast SSID network with my laptop running XP.... but I face the same problem with my other laptop that runs on vista.
of course, when I enabled the SSID broadcast, everything connects fine (the Kaiser and the vista laptop).
If anybody faced this similar problem and knows a solution, please let me know. Appreciate your help in the matter.
What is the point to have the system acknowledging that the network is hidden or not (checkbox option "This is a hidden network:" CHECKED or UNCHECKED ), but still fail to connect to it.
cheers,
JonD.
Click to expand...
Click to collapse
Sounds to me like you have a network issue, not a Kaiser issue since you said your having the same issues on Vista.
I do not broadcast my SSID and my tilt has no problems connecting.
Maybe you have MAC-address filtering enabled?
I have seen routers giving problems with MAC-filtering disabled and SSID broadcasting disabled.
Devices that had a working connection, disconnected when we disabled SSID-broadcast.
Strange, but enabling the MAC-address filter list solved that.
To ajs007, jallenclark & johanromijn thank you for your replies.
I'm using a D-Link DI-524 wireless router that I set as a hidden network (disabled SSID broadcast).
I also enabled the MAC filtering, and of course the device's MAC address is already added to the approved list filter for connections, so I think there is no issue with the router or network (like I mentioned before, when I enabled the SSID broadcast all devices connect perfectly and all is good, but when I disabled the SSID broadcast, the Kaiser & the vista laptop will say the network is unavailable and can't connect).
ajs007, do you think different authentication protocols (you use WEP, but I use WPA-PSK) make any difference?
jallenclark, is there anything you did differently?
Thanks.
JonD
I have the same issue with mine. I cannot connect to a hidden network....initially.
I turned on SSID broadcast, the Tilt connect immediately and then unchecked the SSID Broadcast.
Now it connects always.
Seems like it should work.. other devices connect fine as long as the name is specified.
online142154 said:
I have the same issue with mine. I cannot connect to a hidden network....initially.
I turned on SSID broadcast, the Tilt connect immediately and then unchecked the SSID Broadcast.
Now it connects always.
Seems like it should work.. other devices connect fine as long as the name is specified.
Click to expand...
Click to collapse
Sadly, I tried that, connects immediately when the SSID is broadcast, and while it remains connected, I turn off the broadcast and the device lost connectivity immediately too.
Man... I don't understand this......
here are some more info (ROM version and stuff), just in case you guys out there can help figure this out...... many thanks!
ROM version: 2.50.771.0 WWE
ROM Date: 10 March 2008
Radio version: 1.27.15.32
Protocol version: 22.51.88.13H
I have similar problem, Hermes with wm6.1. When my router is set up to use WEP I have no problem to connect, but I prefer WPA2-PSK and my PDA gets stuck on "connecting".
My iBook and a PC laptop can connect without problem...and so does my buddy's iPhone...
Change the radio version. try flashing a radio that end in 36. xD
i have similar problem with my x1. radio version ends with 18. firmware version is R2AA010. exists one with newer radio? thx.
Works on mine?
I went to a customer site recently where they were deploying a Wireless LAN. As they were using a hidden SSID & WPA2-PSK & AES I tested it with my Kaiser and after a couple of attempts it connected OK (I think typos on my part were why it took two attempts..).
Hidden SSID's are pretty useless anyway as they are easy to discover. I think beefing up the back end security is a much better option - use WPA2 with PEAP or EAP-TLS instead of just hiding the SSID and using Pre-Shared-Keys. If the key is leaked then think of the number of devices you need to manually reconfigure.
Andy
I've been running Dorregaray's camera preview3 for 2 days, and the last OaT 0829 for about a month before that. Wifi worked perfectly. For some reason I can't understand, wifi suddenly stopped working yesterday. It was working fine on both preview3 and 0829. It had intermittent wifi throughout the day, and by yesterday evening the icon wasn't even showing up in the notification bar.
It recognizes the network, but when I put in my password and tell it to connect it just says "Authenticating" and then goes back to "Saved" without connecting. The network wifi is connecting fine with a phone and a laptop, and the LAN is working fine with a desktop.
I've tried turning the wifi off and on again, reconnecting to the network, using a different network (my phone's wifi hotspot), and flashing the latest 1007 nightly. None of these have worked. Anyone got any other ideas or solutions? Thanks!
EDIT: WebOS says "Unable to connect. Try again." Hardware issue?
EDIT 2: fixed. After some Googling, I booted into WebOS, ran the automatic diagnostic at Device Info -> application menu -> Diagnostics -> Automated, and got
Code:
wi-fi code: 1000
After some more extensive Googling, I connected the Touchpad to the PC and used WebOS Quick Install terminal to run
Code:
ifconfig eth0 down
ifconfig eth0 up
which fixed it for both Android and WebOS.
Hi,
my goal is to achieve the following: As soon as I get connected to my home WIFI the open VPN connection should be closed and all calls should be redirected to my landline phone. When my mobile phone looses connection to my WIFI for more than 60 seconds the call redirection should end and the open VPN connection should be reestablished. At my home site I've three access points and roaming works perfectly. There should be no action while roaming on my WIFI.
At the moment I've only created a task for the WIFI part. See attachment. But this task does not work very well. The problem is roaming between the access points. It constantly disables and enables the call redirection.
Any suggestions to get this working?
BTW: If there is a way to suppress the pop up which informs about the redirection is enabled or disabled without root is welcome too.
TIA
Hello everyone,
Ever since I've upgraded my router from an old TP-Link (model TL-WR840N) to a Google WiFi mesh router my Pixel 5 (and also a 2 XL) have a spotty connection. With the old router no issues whatsoever.
They keep dropping offline and reconnecting after few seconds. Sometimes they are unable to join that network at all (I get the message "Unable to connect to this network" or "No Internet")
Every other devices on the network work fine, the issue is just with the Pixels.
Troubleshooting steps taken:
- Rebooted the network;
- Rebooted the devices;
- Toggled WiFi on/off;
- Reset network settings on the 2 XL;
- Use the device MAC address (instead of the random one);
- Set rating provided to "None"
Anyone else having similar issues with mesh routers?
Make a guest network on it and try that