com.android.gallery3d stopped - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Dear friends,
I own samsung galaxy note gt-n7000. I have cynogenmod 10.1.3 with android 4.2.2 in it. I have a issue that when i edit the photos of camera it edit normally but when i touch save it give me the message that com.android.gallery3d has stopped. this error never comes when i edit and save photo that i have downloaded from somewhere it only appear when i edit camera photos.. kindly help me if you know any fix.

Get the latest 10.1 if you want to be on it and flash it.. Check if the problems still exists.

i have the latest version the 10.1.3 on cynogenmod website.. i dont want to try nightlies as they may have other bugs..

Then did you un-install any system apps after installing the rom? If yes then the flashing the rom will restore it.

no i did not uninstall any app.. its since i have install it.. is there anyone else who are facing same issue with CM 10.1.3

این خطا(com.sec.android.gallery3d:-103چیست ک موقع اپدیت ظاهر میشود

Related

Camera firmware problem-please help

I have one problem
When i had 2.3.6 gingerbread on my mini2 my camera works fine, i tried TheWhisp cm10.1 and camera also work fine, i tried cm10 and also its works fine
i was go back to 2.3.6 stock camera also work, but when i was go back to TheWhisp cm10 camera didn't work anymore. i was thinking that its broken because its fall one time, but no
i was surfing around net to find out problem and find out that was problem in camera firmware
when i enter this code *#*#34971539#*#* it brings out camera update menu
when i press check camver/phonever it say null, and when i press update button it give me error
and i cant find camera firmware for samsung galaxy mini2
can someone or Whisp pull out from galaxy mini2 or make camera firmware or something
4. Phone Camera Update
*#*#34971539#*#*
This code is used to get information about phone camera. It shows following 4 menus:
Update camera firmware in image (Don't try this option)
Update camera firmware in SD card
Get camera firmware version
Get firmware update count
Please help me.
samsung codes doesn't work on AOSP based ROMs
TheWhisp said:
samsung codes doesn't work on AOSP based ROMs
Click to expand...
Click to collapse
yes i know that, it work on 2.3
can you make camera firmware, or pull out from 2.3 android and post it
i was reading that this can fix camera, repair in service is pretty expensive here in Croatia, its 50-80 USD
nobody can help with this?
djangovu said:
nobody can help with this?
Click to expand...
Click to collapse
Re-install the rom
ScratchCraftFTW said:
Re-install the rom
Click to expand...
Click to collapse
no **** sherlock
i tried this and didn't work
but now its working fine, one day i just opened camera and it works, sometimes i get error but then restart and camera work again
So, your problem is already solved?

[Q] Bluetooth problem of Galaxy Mini

So guys, for a very long time I'm suffering from this problem, maybe from 2-3 years and wanted to put this question before you so that the Devs could solve it..
So, the problem, is ofcourse with my bluetooth.. It works well in the stock ROMs, but for the Custom ROMs, it never works.. It did worked with only 3 custom ROMs, CM 10.1 Android 4.2.1 by @AntiBillOS, CM 10.2 Jenkins builds and CM 11 Jenkins builds and the reason I noticed why it worked on these build was:
1. There was no 'bluez-plugin' folder in /system/lib
2. The Bluetooth app they contain have /lib/armabi/libbluetooth_jni.so inside the app (which is also there in /system/lib)
In all those builds on which my bluetooth never work have a 'bluez-plugin' in /system/lib and dont have that libbluetooth_jni.so of the app..
I want to ask you people (hope that u have understood my problem well) that:
1. What is this problem?
2. Why is this happening to me? (or only me)?
3. How to solve, what is the solution for this..
All those ROMs on which my bluetooth never works were fully stable for other people.. like ICS, JB, GB, and yes, it does'nt even works on the official CM 7.2 for tass.. So I also doubt that is it only me who's having this problem? It's a very serious and strange problem that I'm suffering from a long time and I hope of a remedy, all those Devs out there, please help me brothers.. (In hope of a quick response of solution)..

Camera stoped working problem, help pls!!!

Hey xda fellas, I'm having Samsung galaxy S I9000 and i got camera problem - "Unfortunately, Camera has stopped" (when i try to use it).
I cleared cache didn't work, I am running CM11 4.4.2 (nightly version), I also updated kernel using this instructions (http://forum.xda-developers.com/showthread.php?t=2580112).
Nighty version of rom that i use is "cm-11-20140416-NIGHTLY-galaxysmtd.zip".
I don't know if i have technical problems with my camera or i messed up something wrong with rom and kernel. Pls help me to make it work again .
P.S.
Before i installed new rom i had 2.3.6 Gingerbread and it didn't work too.
93boba said:
Hey xda fellas, I'm having Samsung galaxy S I9000 and i got camera problem - "Unfortunately, Camera has stopped" (when i try to use it).
I cleared cache didn't work, I am running CM11 4.4.2 (nightly version), I also updated kernel using this instructions (http://forum.xda-developers.com/showthread.php?t=2580112).
Nighty version of rom that i use is "cm-11-20140416-NIGHTLY-galaxysmtd.zip".
I don't know if i have technical problems with my camera or i messed up something wrong with rom and kernel. Pls help me to make it work again .
P.S.
Before i installed new rom i had 2.3.6 Gingerbread and it didn't work too.
Click to expand...
Click to collapse
Most probably a Hardware issue. Best solution, Flash Stock and take it to the nearest Samsung Service Center.

[Q&A] [ROM][4.4][NIGHTLY] OmniROM 4.4 for GT-N7000

Q&A for [ROM][4.4][NIGHTLY] OmniROM 4.4 for GT-N7000
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Newbie needs help
Hi,
My GTn7000 is unrooted with original Samsung ROM. My phone has become so old that, the USB port is not working. This is the first time am trying to put a different ROM in this phone. Since my USB is out, i can only rely on SD card. Is it possible to accomplish new Kernal installation and New mod installation, all with just SD card support? I want to go for OMNI rom for sure, since it appears to be the best stable rom.
If the answer is yes, i will start taking back up and stuff. Please help me do this. Phone is extremely slow and lots of unnecessary apps to get rid off.
Thanks
Dewan
Yes it is possible using ext SD. Read Philz kernel. Then go for raw kernel. Then you are ready for Omni & Gapps. There is a small risk though. If the installation fails or something goes wrong somewhere and you wont have access to recovery then pretty much screwed. So keep that in mind.
sweet_rascal said:
Hi,
My GTn7000 is unrooted with original Samsung ROM. My phone has become so old that, the USB port is not working. This is the first time am trying to put a different ROM in this phone. Since my USB is out, i can only rely on SD card. Is it possible to accomplish new Kernal installation and New mod installation, all with just SD card support? I want to go for OMNI rom for sure, since it appears to be the best stable rom.
If the answer is yes, i will start taking back up and stuff. Please help me do this. Phone is extremely slow and lots of unnecessary apps to get rid off.
Thanks
Dewan
Click to expand...
Click to collapse
You must really be careful - no USB means no ODIN to flash you out of softbricks.
Install [2014.05.01][ROOT] Mobile ODIN v4.20. It may help to get you out of trouble.
I do use Omni on my N7000 supported device, It is great.
To make it easier to transfer files to your phone use [APP] Samba Server for Android. It will allow to map your phone as a network drive under Windows and use wifi for transfers.
And yes, start by flasing raw kernel. It will give you TWRP to flash Omni.
Screen does not go to sleep
ok my issue was solved i think just by flashing a new gapp.
error
Hi,
After the nightly update 4.4.4 9/11 version my galaxy note is giving unfortunately playstore has stopped working error..... klindly give a solution
---------- Post added at 06:46 PM ---------- Previous post was at 06:42 PM ----------
Hi,
My Galaxy note is giving, ''unfortunately, playstore has stopped working'' error, after the nightly update of Omnirom 4.4.4 version on 9/11/2014.. kindly suggest me a solution.. i tried uninstalling play store updates. but its still the same... please help me...
Hello to everyone,
I want to update to Omni from CM10.1.3,
please, help me with few issues.
Should I use Gapps exactly for N7000 (the link doesn't work) or I can use official for all roms?
Is it stable enough for daily use or should I find more stable rom yet?
Your help would be greatly appreciated.
omutoz said:
Hello to everyone,
I want to update to Omni from CM10.1.3,
please, help me with few issues.
Should I use Gapps exactly for N7000 (the link doesn't work) or I can use official for all roms?
Is it stable enough for daily use or should I find more stable rom yet?
Your help would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2397942
i am using the micro modular package of gapps here.
the stability is a little questionable (because it is NIGHTLY build) but im using omnirom 4.4.4 build 2014.11.04 for N7000 because i found it the best.
a kernel
can anyone please compile a kernel for 4.4 nightlies with swap support and mac spoofing
n7000
I Flashed my Note, I need to know abt couple of things like
Wifi Direct not working which I tried Not happening through other apps too
and how to Activate USB Mass Storage
Pls Help me here
Hi,late comer here.
Can i install this rom using this latest kernel? http://forum.xda-developers.com/showthread.php?t=1901191&page=405
And another thing - what is raw kernel?
TIA
No you can't. Philz is for stock (touchwiz based) roms. You need RAW kernel for this OmniRom.
Hi,
I have a problem with the nightly. Everything worked perfectly but then my power button stopped working. This is not a hardware problem because I can start the phone with the power button when its off. The problem occurs only with booted omnirom.
Can you help me? I tried several restarts and an update to the newest nightly.
Thanks in advance.
turn off down buttons light
hello, please tell me how to turn off light on down buttons. I use Omnirom 4.4.4 on gt-n7000.Thank you!
This Rom is better than SlimSaber?
Has the Video Playback issue been fixed?
Hello XDA, I'm new here, so sorry if anything is inaccurate.
I was just wondering whether the Video Playback Issue has been fixed.
I was recommended to move to OmniRom after frequent crashes with CM (my phone couldn't last 20 hours without crashing or requiring a reboot.)
Thank you in advance.
question
Since a fiew days it is not possible to download the new versions of omni without errors?
Is there someone who can fix this?
edit: the problem was fixed sice today! thanks god!:good:
maybe modem problem.try lt4
edit:sorry wrong thread
gapps
Hi! Thanks ! I cant download the gapps -signed.zip, occured some error on mediafire link.
Empty Omnirom nighly folder
I have a Samsung Galaxy Note 10.1 n8013 and have been using the Omnirom 4.4.4 nightlies for a while now. For the last few weeks the Omnirom nightly folder is empty. Is it just me, or did things move? Is this how we're told a version is done and it's time to move on? I see there is a maintainer build for Omni 5.1.x and I'm getting the hint it's time for me to move on to it I'm guessing but I don't know.

[Q] Some help - Install

Hi All,
I'm currently running the following:
CyanogenMOD 11-20140829 Unofficial - tenderloin
'4.4.4
I did this with the toolbox that came out while ago..
Anyway, I'm having VIDEO issues on netfilx app and I just want to maybe go for a new ROM or new flash... is there a stable build for loolly pop? or a very stable build for 4.44?
if so please send me a link to get it? is the toolbox still being used? sorry haven't been here is a while.
Thanks

Categories

Resources