[4.4][Rooted]Failed to hab check for recovery : 0x56 - Moto X Q&A

I am having troubles booting in Recovery after i have root access on 4.4 by going thur JCase's tutorials. Every time I tried to either boot directly into Recovery or select it from the Fastboot menu, i cant this error --
"Failed to hab check for recovery : 0x56"
Can someone give me some insight about this error?

i would restore back to 4.2.2 and follow the 4.4 slapmymoto guide http://forum.xda-developers.com/showthread.php?t=2538896 and see if you have the same issue

Related

[Q] Cant load *.img file and bootloader is not unlockable

I have a Moto X xt1053 with an bootloader that cant be unlockable, in the page of motorola says that my phone doesnt qualify to be unlocked.
The problem is that I was trying to upgrade to android kitkat 4.4 following the instructions in this thread http://forum.xda-developers.com/show....php?t=2545775
All was going good until when I try to flash boot.img, I cant load that file into my phone, So im stucked in the bootloader screen of my phone, because now I cant even get into the TWRP recovery option, just fastboot, I cant load any boot.img file into my phone.
When Im trying to flash the boot.img file, the error that appears in my phone says:
Failed to hab check for boot: 0x56
preflash validation failed for boot
Im in windows XP
Any suggestion???
Any help?????
THANKS A LOT!!!
daritoca said:
I have a Moto X xt1053 with an bootloader that cant be unlockable, in the page of motorola says that my phone doesnt qualify to be unlocked.
The problem is that I was trying to upgrade to android kitkat 4.4 following the instructions in this thread http://forum.xda-developers.com/show....php?t=2545775
All was going good until when I try to flash boot.img, I cant load that file into my phone, So im stucked in the bootloader screen of my phone, because now I cant even get into the TWRP recovery option, just fastboot, I cant load any boot.img file into my phone.
When Im trying to flash the boot.img file, the error that appears in my phone says:
Failed to hab check for boot: 0x56
preflash validation failed for boot
Im in windows XP
Any suggestion???
Any help?????
THANKS A LOT!!!
Click to expand...
Click to collapse
did you solve it? cuz i have the same problem now
i am confused here because if you can't unlock your bootloader then you can't install TWRP.
my would say grab the SBF package for your phone from the link below.
http://sbf.droid-developers.org/phone.php?device=0
and flash it with RSD Lite or the manual Method.

[Q] Possibly bricked? It would be awesome if someone could help

Hi Xda
Forgive me for what you are about to read, as I have carried out some dumb ### noobness:
I was running Sinless 5.1Gpe rom (great rom) anyways I wanted to return to a sense based rom so decided to go for ARHD 40.2 fter reading a number of posts mentioning doing a complete wipe of the phone including SDCARD. I checked the process of pushing via adb and all seemed simple enough.
I initially did a test and it pushed the file, so then i carried out the complete wipe (no OS, no rom on sd card to flash). I then tried to push the rom and it failed. I tried a number of different ways sideload too.
I managed to get the rom to push in the end using the lastest TWRP of which it would not allow me to do rom failed to flash...
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
I will get there said:
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
How did you unlock the first time? HTCDev or S-OFF?
Can you post the error you get when you try to unlock?
I will get there said:
Hi Xda
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
if you have s-off you should flash back a custom recovery:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter RECOVERY, and adb should be working again,
use this to unlock your phone: http://forum.xda-developers.com/showthread.php?t=2475914
there's also a handy Guru Bootloader Reset (flashable zip): http://forum.xda-developers.com/showthread.php?t=2527194
but it needs either CWM 6.0.3.2+, or TWRP 2.6.3.3+ to work.
or even "revone -u"
I will get there said:
Hi Xda
Forgive me for what you are about to read, as I have carried out some dumb ### noobness:
I was running Sinless 5.1Gpe rom (great rom) anyways I wanted to return to a sense based rom so decided to go for ARHD 40.2 fter reading a number of posts mentioning doing a complete wipe of the phone including SDCARD. I checked the process of pushing via adb and all seemed simple enough.
I initially did a test and it pushed the file, so then i carried out the complete wipe (no OS, no rom on sd card to flash). I then tried to push the rom and it failed. I tried a number of different ways sideload too.
I managed to get the rom to push in the end using the lastest TWRP of which it would not allow me to do rom failed to flash...
Now this is the stupid part, TWRP became unresponsive, and every time I tried to boot into recovery it would kick me out to the spash screen and bootloop. I did the fastboot erase cache without any success.
I managed to switch to CWM but could not mount anything so came across a post about switching to stock....This is the really stupid part. I flashed a stock recovery and also I now have a relocked bootloader.
Is this phone now bricked??
I have fastboot available
I am S-off
I can boot into stock recovery (Red triangle)
I cannot use ADB (device not recognised)
I cannot re unlock bootloader (tried twice and failed) - I will try again as it got to 4am and had to be up for work at 6am.
Any help really really apreciated.
Many thanks
Mick
Click to expand...
Click to collapse
If you can get to the stock recovery press volume up then power button and quickly release both buttons and you should be in stock recovery. From here you should be able to follow any of the posted steps to flash a RUU back to pure stock.
solbirn said:
How did you unlock the first time? HTCDev or S-OFF?
Can you post the error you get when you try to unlock?
Click to expand...
Click to collapse
Hi thanks for your response, I initially HTCDev then rumrunner to gain s-off.
The error I get is:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Michael\Desktop\Adb And Fastboot>fastboot flash unlocktoken Unlock_code
.bin
target reported max download size of 1514139648 bytes
error: cannot load 'Unlock_code.bin': No error
C:\Users\Michael\Desktop\Adb And Fastboot>
nkk71 said:
if you have s-off you should flash back a custom recovery:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
-> enter RECOVERY, and adb should be working again,
use this to unlock your phone: http://forum.xda-developers.com/showthread.php?t=2475914
there's also a handy Guru Bootloader Reset (flashable zip): http://forum.xda-developers.com/showthread.php?t=2527194
but it needs either CWM 6.0.3.2+, or TWRP 2.6.3.3+ to work.
or even "revone -u"
Click to expand...
Click to collapse
Hey thanks for your response
I cant flash custom recovery the error i get is similar to trying to unlock.(above)
I cannot also use that thread because I cannot access adb (even though my phone recognises fastboot in device manager, when I go to what is now stock recovery is disappears from device manager)
I have no OS so cannot open up emulator for revone.
loughary said:
If you can get to the stock recovery press volume up then power button and quickly release both buttons and you should be in stock recovery. From here you should be able to follow any of the posted steps to flash a RUU back to pure stock.
Click to expand...
Click to collapse
Hey thanks for responding
I can get into stock android recovery(3e) it enters after notifying me that it failed to mount sd card 5 times then finishes with cannot mount sdcard (no such file or directory)
then finally write host_mode:0 done
any further suggestions?
I will get there said:
Hi thanks for your response, I initially HTCDev then rumrunner to gain s-off.
The error I get is:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Users\Michael\Desktop\Adb And Fastboot>fastboot flash unlocktoken Unlock_code
.bin
target reported max download size of 1514139648 bytes
error: cannot load 'Unlock_code.bin': No error
C:\Users\Michael\Desktop\Adb And Fastboot>
Hey thanks for your response
I cant flash custom recovery the error i get is similar to trying to unlock.(above)
I cannot also use that thread because I cannot access adb (even though my phone recognises fastboot in device manager, when I go to what is now stock recovery is disappears from device manager)
I have no OS so cannot open up emulator for revone.
Hey thanks for responding
I can get into stock android recovery(3e) it enters after notifying me that it failed to mount sd card 5 times then finishes with cannot mount sdcard (no such file or directory)
then finally write host_mode:0 done
any further suggestions?
Click to expand...
Click to collapse
You're getting "cannot load"? That just means the filename is wrong, as simple as that. If ur on Windows, check for .img.img (double extension)
Sent from my HTC One using Tapatalk
nkk71 said:
You're getting "cannot load"? That just means the filename is wrong, as simple as that. If ur on Windows, check for .img.img (double extension)
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks @nkk71
I now have an unlocked bootloader
I have also now flashed CWM 6.0.4.5 however I still do not have adb available. The difference now is fastboot is recognised in device manager as before but when I boot into CWM instead of it dissapearing, it moves to 'other devices' one (with yellow exclamation) I know it did this before because of drivers not being installed/recognised but I have htc sync manager installed which in theory has installed the drivers??!
Anything else I can try without adb?
Again many thanks for your assistance, I see you in a number of threads helping people...top bloke!
Further update
I downgraded my hboot back to 1.55 and now TRWP is now functioning, I have now pushed a rom to the phone, however flash fails due to "unable to mount to internal storage"
Is there a fix for this?
Many thanks
I will get there said:
Further update
I downgraded my hboot back to 1.55 and now TRWP is now functioning, I have now pushed a rom to the phone, however flash fails due to "unable to mount to internal storage"
Is there a fix for this?
Many thanks
Click to expand...
Click to collapse
I suggest that you downgrade to Hboot 1.44, keep the bootloader locked and run the 1.28.401.7 RUU to be completely stock. Then its up to you whether you re staying stock or flashing sth custom.
Ivanovic said:
I suggest that you downgrade to Hboot 1.44, keep the bootloader locked and run the 1.28.401.7 RUU to be completely stock. Then its up to you whether you re staying stock or flashing sth custom.
Click to expand...
Click to collapse
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
I will get there said:
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
Click to expand...
Click to collapse
IF you re flashing a 4.4 ROM then use TWRP 2.6.3.3 or latest CWM
IF you re flashing a 4.3/4.2 ROM then use TWRP 2.6.3.0 or older CWM
Link for the RUU http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
I will get there said:
Thanks @Ivanovic
I have since moved on a little further, i have now managed to push a rom via sideload, when i then go to flash it says:
Updating partion details....
E:unable to open zip file.
Error flashing zip /sdcard/sideload.zip
updating partition..details
failed
do you know a workaround this, if not could you direct me to a page with both hboot 1.44 and the RUU please
Click to expand...
Click to collapse
http://www.htc1guru.com/downloads/ruu-file-downloads/
I had to use the exe version to get it working when I had a similar issue.
Sent from my One using Tapatalk
Yes there is a fix. Install stock recovery. Go to bootloader and select factory reset. It will go to stock recovery and do it's thing and should go into a Bootloop . install custom recovery you should be good
Hi All
Just a quick note, to say all back up and running, thanks for all the respondants who helped.
I wanted add how i got it up and running, so if anyone has similar issues they can use it:
I believe the biggest culprit was the newest Firmware and TWRO 2.3.3.3 in which it did not want to load.
I downgraded by Hboot to firmware 3.xxx and then flashed TWRP 2.3.3.0 and it let me in instead of kicking me out to a bootloop.
I then had access to ADB sideload, which did not work for me in the 1st instance that led me to my problem, This i believe was due to not having the lastest SDK.(upgrade this).
Make sure the Rom you are pushing works well for that downgraded firmware i.e. a solid 4.3 based rom in my case.
Also to note I wiped my external SD card and was unable to mount this to flash, let TWRP sort this by doing a factory reset prior to flashing.
Hope this helps anyone who experienced similar symptoms to me.

stuck in fastboot, cant flash anything, cant go to recovery

my phone: Nexus 6 32gb international
marshmallow (MRA58R) with cataclysm rom
twrp custom recovery and elementalx kernel
rooted, unlocked bootloader, no xposed
1. my phone was running fine until it randomly crashed and got stuck in fastboot menu. trying to start does nothing but in bootloader logs it shows this:
Code:
failed to validate boot image ret=-1
trying to reboot recovery gives:
Code:
failed to validate recovery image ret=-1
so i guess time to flash a MRA58R factory image right? however:
2. trying to flash via "flash all" script, manual one by one flash, or using the nexus root toolkit gives:
Code:
<bootloader> failed to flash partition
FAILED <remote failure>
this happens when i try to flash recovery (Stock or twrp) or bootloader or bootimage or system or anything. i have to my knowledge adequate platform tools setup which ive used multiple times before. my sdk tools are updated as well. at this point ill try anything. and i use windows. please help
Osaab said:
my phone: Nexus 6 32gb international
marshmallow (MRA58R) with cataclysm rom
twrp custom recovery and elementalx kernel
rooted, unlocked bootloader, no xposed
1. my phone was running fine until it randomly crashed and got stuck in fastboot menu. trying to start does nothing but in bootloader logs it shows this:
Code:
failed to validate boot image ret=-1
trying to reboot recovery gives:
Code:
failed to validate recovery image ret=-1
so i guess time to flash a MRA58R factory image right? however:
2. trying to flash via "flash all" script, manual one by one flash, or using the nexus root toolkit gives:
Code:
<bootloader> failed to flash partition
FAILED <remote failure>
this happens when i try to flash recovery (Stock or twrp) or bootloader or bootimage or system or anything. i have to my knowledge adequate platform tools setup which ive used multiple times before. my sdk tools are updated as well. at this point ill try anything. and i use windows. please help
Click to expand...
Click to collapse
Is the phone unlocked?
Code:
fastboot oem unlock
Can you erase userdata and cache
Code:
fastboot -w
mywindow said:
Is the phone unlocked?
Code:
fastboot oem unlock
Can you erase userdata and cache
Code:
fastboot -w
Click to expand...
Click to collapse
the phone is unlocked. it shows unlocked status 3 or something. and no -w gives the same error (failed to flash partition).
i was wondering i dont remember if i had "allow oem unlocking" enabled in the dev options and now i cant access it. is there a way that can be a problem?
Osaab said:
the phone is unlocked. it shows unlocked status 3 or something. and no -w gives the same error (failed to flash partition).
i was wondering i dont remember if i had "allow oem unlocking" enabled in the dev options and now i cant access it. is there a way that can be a problem?
Click to expand...
Click to collapse
I doubt it, since you don't need to unlock it a little more.
You should check your USB cable, or try to switch to another port. But if the error still persists, you need to send it to repair.
I am sorry mate, but u might have to send it in for real
Maybe your nand memory is corrupted. Since ur phone just crashed for "no reason" and then got stuck in fastboot, it may be an indicator for that.
Best regards!
Osaab said:
the phone is unlocked. it shows unlocked status 3 or something. and no -w gives the same error (failed to flash partition).
i was wondering i dont remember if i had "allow oem unlocking" enabled in the dev options and now i cant access it. is there a way that can be a problem?
Click to expand...
Click to collapse
I BELIEVE once you tick it and unlock, it does not turn back off (allow OEM unlock)
But as said above, this option only allows the bootloader to accept the unlock command...
Best case is the internal storage got scrambled and your partitions/ partition table is corrupt/missing/gone, worse case and maybe more likely is hardware failure?
Not sure if you can send terminal commands, but next step is either just RMA or searching the internet for a way to manually rebuild partition table from bootloader?
I guess?
Sounds like it messed it self up pretty good somehow, sorry man.

Having trouble with restoring a soft-bricked XT1068

Hi there,
a friend asked me for help with restoring his german Moto G 2014 (XT1068). The last working software on the device was the Marshmallow update. He was having software issues and softbricked the device when trying to install a custom ROM.
Fastboot mode and stock recovery is accesible, the bootloader is unlocked and the device is stuck on the "WARNING: BOOTLOADER UNLOCKED" screen when trying to boot normally.
I have tried following this guide to revert the phone back to stock firmware with a matching system image. Both the XT1068_TITAN_RETDE_6.0_MPB24.65-34-3_cid7_CFC and XT1068_TITAN_RETAILDSDS_6.0_MPB24.65-34-3_cid7_CFC images will flash without any error messages. However, the device does not boot the new software. Also, when trying to relock the bootloader, the mfastboot oem lock command failes with the error message Not supported command in current status!. I tried to substitute mfastboot with fastboot, changed USB cables and downloaded new copies the images, with no success.
Digging deeper, I found out that I could not wipe cache or data using the stock recovery. This will fail with the error message blkdiscard on partition /dev/block/platform/msm_sdcc.1/by-name/cache failed. Further troubleshooting attempts lead me to try twrp custom recovery software (Version 3.1.1) which I could only start using the mfastboot boot twrp-3.1.1-0-titan.img command since flashing the image as custom recovery will not fail but the phone instantly and silently reverts to stock recovery - even when not rebooting inbetween. Consequently, any attempts to flash an image using the software will fail with E1001: Failed to update system image.
At this point, I have no idea what else I could try. That's why I turn to you, great community of XDA .
Any help would be greatly appreciated.

Solved with Corrections: Unable to flash TWRP, Failed (Remote: command not allowed)

Hi,
I just purchased a used Xperia Z1 C6903 and I am trying to put the latest Nougat Resurrection Remix on it. I need to get TWRP going first which I got stuck at trying to flash it.
I was able to get the phone downgraded to 14.1.G.1.534 using flash tool (ver 0.9.24.3). I did this following the guide here https://forum.xda-developers.com/showthread.php?t=2439328.
I was able to root it using Kingoroot.
I was able to unlock the bootloader using flashtool. Using *#*#7378423#*#*, the phone now reports Bootloader Unlocked: yes. See attached screenshot.
The part that I got stuck at is trying to flash TWRP in Fastboot. The command lines and error are below. The main error being "FAILED (remote: Command not allowed)"
I don't have an option in developer's options to "Unlock OEM bootloader". I read some other Xperia users being able to fix this problem by checking this.
I am running Windows 8.1. I am relatively sure that my drivers are correct. I had gotten a "drivers too old" error before in Flashtools but I was able to correct it by reinstalling new drivers.
I tried having debugging checked and unchecked before going into Fastboot and made no difference.
Tried both twrp-2.8.7.0-honami and twrp-3.0.2.0-honami with no success. Tried shortening file name to trp.img with no success.
Tried different 2 different adb files around the web with no success.
I read somewhere someone mentioned briefly that TWRP can be flashed using Flashtools. Is that true? I wasn't able to find a full guide for it.
Any help would be appreciated!
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash recovery trp.img
target didn't report max-download-size
sending 'recovery' (13672 KB)...
OKAY [ 0.433s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.439s
Well I was able to get TWRP on there by installing the XY Dual Recovery. The problem with it is that the Resurrection Remix's installation instruction says to use TWRP 3x or higher. TWRP on XY is only at 2.8.7.0. I couldn't find a TWRP 3x flashable zip file for Honami and TWRP wouldn't flash TWRP 3x IMG file I found. Fastboot is still giving me the same Command Not Allowed error.
Any ways, I went ahead and flashed RR with 2.8.7.0. When I tried to flash GAPPs after it says there is insufficient space. I have at least 9GB+ internal storage. So not sure what the deal is there.
I also lost Dual Recovery and root after first RR boot.
Looking into getting re-rooted and reinstalling XY Dual Recovery now.. And then flashing GAPPS after.
Anyone know what the consequences are for installing RR with a lower rev of TWRP?
So the RR Rom does have root but it just doesn't have apps root. Only ADB root. I cant flash the su add on from Lineage's site since I lost recovery. I ended up FTF back to stock and then reflashed everything, the ROM then pico version of GAPPs (pico worked) and then the su addon. The su addon had an error when flashing in TWRP.
Any ways, long story short the whole thing didn't work. Still stuck with RR Without recovery. Su addon didnt work from the flash. And for whatever reason my SIM is not detected and I lost my IMEI in RR. I read that this is a known issue with C6902 but I have the C6903 and I had confirmed this through the service menu before ROM flash. Maybe problems with flashing RR without the latest TWRP.
The Command Not Allowed is still an issue that I dont know how to resolve. So I still can't flash newer version of TWRP.
Any help would be appreciated....
I guess I will try to find a ROM that 's compatible with TWRP 2.8.7.0.
OK! I figured out what the Command Not Allowed problem is!
I've been following the flash guides from a few websites. And they all reference this syntax for flashing TWRP.
Fastboot flash recovery twrp.img.
This syntax didn't work for me. All those websites properly copycat each other.
That syntax is either incorrect or just didnt work for my setup for some reason. I kept searching for ways to flash TWRP and found another website that uses a different syntax. I gave it a go and TWRP flashed right away. This is the syntax that worked for me.
Fastboot flash boot twrp.img
At least that part of the problem is resolved.
Even after flashing RR with TWRP 3.0.20, the SIM/IMEI is still not showing. Recovery is still lost on first boot. Reinstalling TWRP on top of RR causes RR to not boot any more. I will have to look into the RR thread to investigate more.
I will mark this thread as Solved for the Command Not Allowed.
Crossed out everything cause that was not the correct solution. Striked them out to keep them as part of the troubleshooting steps history.
Oops duplicated post.
OK! So it looks like I have to correct myself here on my previous solution.
My solution from earlier for using "Fastboot flash boot twrp.img" is incorrect apparently. Don't use this!
That was the reason why my TWRP was lost after RR boot. The recovery partition comes after the boot and system partition. By flashing the recovery into boot, it screws up the order.
Nevertheless, the Command Not Allowed was still a problem if I tried to use "Fastboot flash recovery twrp.img"
Any ways I was still looking into this problem and started looking into the boot.img stuff and saw someone uses this command line: "fastboot erase boot". This helps someone being able to flash a boot.img when the user was having the Command not Allowed problem trying to flash a different img for the boot partition.
This gave me an idea to try and use "fastboot erase recovery".
I gave it a try and I was able to use "fastboot flash recovery twrp.img" afterwards! It was done in a second.
Then I went through the normal steps of flashing RR and TWRP stayed this time. So now all is good with everything!
Any ways to recap, my full steps used for my RR Installation:
1. Flashtool to flash an Android 5.1.1 stock rom. I used C6903_14.6.A.1.236_1276. (obtained through Flashtool, Xperifirm) Your phone has to run in 5.1.1 for the SIM and IMEI to work in RR. Don't need to flash modem.zip, that's for C6902 only.
2. Fastboot flash erase recovery
3. Fastboot flash recovery twrp.img
4. Follow instructions to flash RR normally.
5. Resize system partition size (for flashing GAPPS micro size or larger).
6. Flash GAPPS.
7. Flash su addon from Lineage's website to allow root for apps and ADB.
I hope this helps someone with similar problems in the future. Thanks to those who stop in to see me ramble to myself about silly stuff
I had the same error message and was able to successfully flash using the phone and the Android Studio Emulator app.
I was already rooted and had an unlocked bootloader.
I tried this solution and it said error: cannot "recovery": No such file or directory LOL even though it's right here and I use it all the time..........I just can't figure it out.

Categories

Resources