Hey Guys,
I have P990 and I'm using CM10 nightly, and I really want to change ROM as this works really bad on my device.
I downloaded DjangoManouche X 1.6.1 and whenever I go to install, it goes through the first steps, then screen gets black and goes back to Clockwork Recovery. I tried with other ROMs and similar things happen.
What could it be?
Thanks|
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
Did you make ful wipe?
Factory reset,wipe cache partiton,wipe data,wipe cache,wipe system and wipe dlvik.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
Yes, I've wiped everything, I tried formatting everything, I did a factory reset, all of that
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I don't know...maybe you could try reflash recovery...
And do you pay attention on wich bootloader version of rom you installing...
Sorry for bad english
Sent from my LG-P880 using xda app-developers app
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
And if you installing from external sd card,maybe that could be problem...try from internal...maybe is sd card broken
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Sorry for my ignorance,
how can I do that?
Oh also, I can install other CM ROMs, those are the only ROMs I can install...not other one!
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
With all in one tool i think there must be option,...i'm not expert so you better check this before try'n...but first try install rom from internal card if you didn't...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Ok, so a few things I haven't mentioned before, whenever I connect my phone VIA usb to my computer, nothing happens. I don't have the possibility to flash anything VIA USB, so what can I do?
Do you install all drivers?look in all in one tool section...there is everything...
Sent from my LG-P880 using xda app-developers app
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
60nine said:
if you're on an official cm nightly then you're on a old bootloader... django is on the new bootloader...
search dev thread for aio tools and how to switch to a new bootloader
edit:
or install one of cm based old bl roms outthere (there is also an old/new bootloader converter tool somewhere in dev thread as well but i don't know if it works for converting all roms - it worked for me on tonyp "the rom" roms up to build 26)
Click to expand...
Click to collapse
I just installed CM7 stable, so what should I do now?
And how you did this?where was the problem?
Sent from my LG-P880 using xda app-developers app
why cm7?
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
xperia u20i said:
And how you did this?where was the problem?
Click to expand...
Click to collapse
i explained his problem, but i still don't know why he installed a prehistoric cm7 instead one of the newer cm10.2 based roms
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
xperia u20i said:
I wonder to...maybe is gb lower... who know's
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Well, just because it's the only ROM I can install. Still want to upgrade, but I can't do anything. USB isn't working, ROM from external SD don't install...
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
occured kenblis
60nine said:
don't get me wrong, cm7 is a good rom (especially if you installed Temasek one + vadonka kernel) - battery is great with this combo (i was using that combo for almost a year until cm10/10.1/10.2 versions of tonyp roms + pengus kernels came out in the beginning of 2013)...
but cm10.2 has some usefull stuff and many improvements over cm7...
i can only suggest you to read some more threads in the developer section... moving to a new bootloader can give you some more benefits if you're into the newest roms (since the rom developers usually support only the new bootloader first, and then they make an old bootloader versions of their roms/kernels as well - or they don't - it's up to them and their free time)
i'm also considering to finally switch to a new bootloader - but i'm still waiting for the new cm11 (kitkat) roms and 3.1+ kernel to become stable enough for a daily use...
it's up to you to see what you need most out of the rom... but some reading before flashing is mandatory... if you've read some more - you'd already know your problem before i wrote my post and explaining the old/new bl issue...
once a week someone comes up with the same problem because he doesn't read about bootloaders or is just lazy to read the 1st posts in the rom threads...
i hope i helped... cheers
Click to expand...
Click to collapse
How is Cm10.2 working for you? Battery life/speed/etc
I had 10.1 I believe and it was horrible.
I can' install new bootloaders, etc...as I can't enter debug mode, nor do anything
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
tom9191 said:
I had 10.1 I believe and it was horrible.
Click to expand...
Click to collapse
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
60nine said:
just to make sure...
your usb doesn't work when the phone is fully booted into the rom or it doesn't work for SW upgrade?
did you try other usb ports? (don't use usb hubs for this, especially for SW upgrade stuff)
did you install the correct windows drivers for the phone?
---------- Post added at 09:27 PM ---------- Previous post was at 09:23 PM ----------
it was horrible if you used the official CM10.1 nightlies... not if you've been using tonyp cm10.1 based roms and pengus kernels... believe me...
currently i'm on the tonyp "The rom" build 26 + pengus kk126 kernel (no ram hack version)
battery lasts for almost 2 days with moderate use (around 3 hrs screen on + wi-fi on, some calls, some messages)
phone is snappy, i don't have syncs turned on in any app...
phone is oc-ed to 1500mhz (min 216, max 1500mhz), and if you care about the benchmarks - it gives a solid 9000+ in antutu...
for a 3 year old phone - i'm satisfied enough...
btw what version of cwm do you have?
your starting point can be here
http://forum.xda-developers.com/showthread.php?t=2020737
and please at least read the 1st page of the thread if not all of it (for user comments)
there is also an option to install the correct windows drivers and a tutorial for windows 8 (i'm on win7 x64)
Click to expand...
Click to collapse
tom9191 said:
I've tried different ports, different cables, different copmuters...I've read that a lot of people have this issue though, especially after upgrading to CM7...which was my case. Ever since I haven't been able to do it
Click to expand...
Click to collapse
omg...this is a puzzle (at least for me ,maybe some on can solve this in a snap,but it really seems complicated)
first, we need to resolved why smart flash won't recognize your device...than everything should go with no problems
---------- Post added at 11:19 PM ---------- Previous post was at 11:06 PM ----------
what color is INSTALL APX in aio toolkit...is it gray or is white like every thing else, when you connect phone?
if you have installed all drivers(lg united,nvflash drivers,apx,adb usb drivers...that is in tonyp basketbuild downloads in p990 staff-->various ) and if you are not did this: SU660 Users: Download Both P990 & SU660-AddOn packages. Run & extract the P990 first and then extract in the same folder the SU660-AddOn. AIO-Toolkit will be converted to support SU660 device
by mistake i really dont know where is problem...
Related
hello friends i have installed cyanogenmod on my optimus 2x one week ago and now i want to teturn to my old original gingerbread stock rom that lg provided me. i didnt take nandroid backup of that rom. so pls guys help me as soon as possible. as give me brief details of updating thax in advance..
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1035041&highlight=original
Find your firmware that fits to your country and provider. Download the file and read the instructions (link at the bottom of the first post).
After that, you'll have an untouched stock rom again (but why? )
If you have a Backup of the Stock ROM you could just restore from it.
But if you dont, you have to download your ROM and use SmartFlash.
You should try MIUI Roms if CMs a bit out of your taste.
Goodluck though!
xerol said:
hello friends i have installed cyanogenmod on my optimus 2x one week ago and now i want to teturn to my old original gingerbread stock rom that lg provided me. i didnt take nandroid backup of that rom. so pls guys help me as soon as possible. as give me brief details of updating thax in advance..
Click to expand...
Click to collapse
Can i know the reason why u want to go back to stock....?if it is to something specific....its ok...but if it is to change ROMs...then i can suggest something....
SREEPRAJAY said:
Can i know the reason why u want to go back to stock....?if it is to something specific....its ok...but if it is to change ROMs...then i can suggest something....
Click to expand...
Click to collapse
Feel free to suggest
Sent from my LG-P990 using XDA App
luka2858 said:
Feel free to suggest
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Try the newer ROMs based on V20O....which will ofcourse require you to flash the Base Band V20M and the RIL recommended by GetRIL or LG RIL apps.
But, personally, I was happy with Thanatos 5.1, Blazing Dragon 2.1a, Django0.5ICS with spica's Kernel....all these gave me a minimum of 40hrs in battery performance and the device was very soft with movement with extremely few reboots and FCs in app openings.
Everything depends on ur satisfaction and feel.....Try these....I tried also the CM7 but changed....so try all the great work by developers....appreciate the fact that without these guys....this device would be uninteresting...
BRAVO DEVELOPERS of LG O2X
May I also ask - what ROM were you specifically using? Were you using CM 7.1 normal? Were you using some other CM7 based rom?
I recently made the switch from stock GB to tomasek's CM7 nightly based rom and I'm not going back - it's just heaps and bounds better than anything else I've tried.
If you have in fact tried a recent CM7 "Kang" build then please tell us what you found lacking.
To me there would only be one single reason to go back to stock - the LG widgets. I haven't found anything that works like the LG Memo widget anywhere else. (ie it's a widget, not only an app. You can also slide left/right to get the next/previous note. I haven't found anything that can do this). If someone pointed me at a similar widget then I'd be set.
But that aside, it's worth not having the LG widgets if it means getting all the other improvements of CM.
Another big point for me - Where do you think the first ICS roms will come from?
Very likely CM9. They are hard at work at it right now and looking at the progress document they're making huge steps every day.
So getting used to CM7.x now only means that it's easier to switch to CM9 (ICS) when it comes.
That's just my 0.02 of whatever currency you happen to be using.
// Stefan
yeah just flash a stock rom over it, and make a backup of your apps if you need to
SREEPRAJAY said:
Try the newer ROMs based on V20O....which will ofcourse require you to flash the Base Band V20M and the RIL recommended by GetRIL or LG RIL apps.
But, personally, I was happy with Thanatos 5.1, Blazing Dragon 2.1a, Django0.5ICS with spica's Kernel....all these gave me a minimum of 40hrs in battery performance and the device was very soft with movement with extremely few reboots and FCs in app openings.
Everything depends on ur satisfaction and feel.....Try these....I tried also the CM7 but changed....so try all the great work by developers....appreciate the fact that without these guys....this device would be uninteresting...
BRAVO DEVELOPERS of LG O2X
Click to expand...
Click to collapse
O i appreciate their work,spica1234 made kernels that made even stock rom good..
Sent from my LG-P990 using XDA App
Wheres my BEATS audio?
I have CYANOGENMOD loaded on my HTC ON SPRINT. Now my play store does not work.... And I seem to be stuck from downloading anything.
What the heck... Please help.... Been searching here for almost a week.
I a OK going wither way. Completing the CYANOGENMOD or returning to the STOCK ROM.:cyclops::fingers-crossed:
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
eistmxcxc said:
Take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1035041&highlight=original
Find your firmware that fits to your country and provider. Download the file and read the instructions (link at the bottom of the first post).
After that, you'll have an untouched stock rom again (but why? )
Click to expand...
Click to collapse
I see no thread for the USA. My HTC ONE SPRINT USA is not able to access the PLAYSTORE since my botched change to CYANOGENMOD.
[email protected] said:
I have CYANOGENMOD loaded on my HTC ON SPRINT. Now my play store does not work.... And I seem to be stuck from downloading anything.
What the heck... Please help.... Been searching here for almost a week.
I a OK going wither way. Completing the CYANOGENMOD or returning to the STOCK ROM.:cyclops::fingers-crossed:
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
I see no thread for the USA. My HTC ONE SPRINT USA is not able to access the PLAYSTORE since my botched change to CYANOGENMOD.
Click to expand...
Click to collapse
Please don't post it here, just go to the HTC One thread. Are you sure you did install the gapps?
Gapps won't install
wouter-visser said:
Please don't post it here, just go to the HTC One thread. Are you sure you did install the gapps?
Click to expand...
Click to collapse
It says can't open file. ?
Hi guys!
I have some questions about mebitek's CM 7.2-RC1 build.
-Is the Task Manager application really not included in this ROM?
-Are you guys also having some issues wherein some sound distortion will occur while playing music through a headset using the stock music player application?
-I noticed that whenever I reboot my phone, my OpenVPN Settings application will always force close and the only way to fix it is by restoring its Data through Titanium Backup. Are you guys also experiencing this?
Those issues are really at a minimal level and so far, Im liking this CM 7.2 build (I've been using this for a week now.)
I hope someone can answer my questions.
Thanks in advance!
xxxraymond said:
Hi guys!
I have some questions about mebitek's CM 7.2-RC1 build.
-Is the Task Manager application really not included in this ROM?
-Are you guys also having some issues wherein some sound distortion will occur while playing music through a headset using the stock music player application?
-I noticed that whenever I reboot my phone, my OpenVPN Settings application will always force close and the only way to fix it is by restoring its Data through Titanium Backup. Are you guys also experiencing this?
Those issues are really at a minimal level and so far, Im liking this CM 7.2 build (I've been using this for a week now.)
I hope someone can answer my questions.
Thanks in advance!
Click to expand...
Click to collapse
-No but u can install it
-Nope
-DUnno
you can push stock manager in system/app , how to do that there's an existing thread about that. or use advance task manager, it has a feature that can automate the clearing of ram when everytime your screens turna off.
- i think most of all of cm7 has that distorting sound. i also use this rom, im using player pro without the dsp pack feature of this music player. tip, lower the bass or dont touch it from the equilizer. and disable the bass boost in the rom's dsp setting.
- i dont have any force closes encountered since i use this rom.
rexidi said:
you can push stock manager in system/app , how to do that there's an existing thread about that. or use advance task manager, it has a feature that can automate the clearing of ram when everytime your screens turna off.
- i think most of all of cm7 has that distorting sound. i also use this rom, im using player pro without the dsp pack feature of this music player. tip, lower the bass or dont touch it from the equilizer. and disable the bass boost in the rom's dsp setting.
- i dont have any force closes encountered since i use this rom.
Click to expand...
Click to collapse
thanks for answering my post sir i dont really need an automated task killer, i only need something i could use whenever an app starts becoming unresponsive. ill try your suggestion of pushing the stock task manager for sure
i just reflashed another cm7 rom (kittenlinux's odex cm7 revision of mebitek's rom) and i didnt encounter fc in openvpn. im gonna try this rom since i think this is an optimized version of the original rom. the only thing that i cant seem to find is the option to kill app using long press of the back button.
p.s.: i think most people here doesnt understand our reason for using openvpn on our phone since they are from a different country.
xxxraymond said:
p.s.: i think most people here doesnt understand our reason for using openvpn on our phone since they are from a different country.
Click to expand...
Click to collapse
yeah in india we dont have vpn service!
i think its related to use net free..
m i right!?
Sent from my GT-S5570 using Tapatalk 2
ronakmachhi said:
yeah in india we dont have vpn service!
i think its related to use net free..
m i right!?
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
yep thats right
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
rhonalddean said:
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
Click to expand...
Click to collapse
I also use mebitek rom.. for soft button i use button savior and this application was great.
rhonalddean said:
Hi.. just new here... i am using "update-cm-7.2.0-RC1-tass-mebitek-v1.2-signed" about a days now also flashed "MOD CM7.2 OfficialUnofficial 05-20-2012 Transparency Support + Soft Buttons" and it's working fine.. but the softbuttons background color is lighter than the status bar... is there something to do with this to make it with the same color? another thing... this "[CWM][SCRIPTS][TWEAKS] Adrenaline™ Engine | 4.0 | CM 4.1 | 4/6"... is it compatible with this Rom? Please help... Thanks!
Click to expand...
Click to collapse
i haven't tried using soft buttons yet but regarding your question about adrenaline engine's compatibility with this rom, it is compatible. just make sure you use the CM version of the script
adrenaline made my phone become more snappier. just be sure to mount data and system before flashing or else it wouldnt work.
on mine, i don't flash any tweaks in this rom. i'm satisfied to the speed of this this rom, even overclocked in 604Mhz. i also removed soft botton that i flashed. sorry for my bad english.
snina said:
I also use mebitek rom.. for soft button i use button savior and this application was great.
Click to expand...
Click to collapse
before the cm7 soft button came out, i use button savior... it's much comfortable to use a single tap...
---------- Post added at 08:55 PM ---------- Previous post was at 08:49 PM ----------
xxxraymond said:
i haven't tried using soft buttons yet but regarding your question about adrenaline engine's compatibility with this rom, it is compatible. just make sure you use the CM version of the script
adrenaline made my phone become more snappier. just be sure to mount data and system before flashing or else it wouldnt work.
Click to expand...
Click to collapse
Thanks @ xxxraymond... doing a trial and error approach makes it perfect... hoping it won't hard brick my phone on frequent flashing... is there any incidence (hard brick) happened on frequent flashing?
---------- Post added at 09:03 PM ---------- Previous post was at 08:55 PM ----------
rexidi said:
on mine, i don't flash any tweaks in this rom. i'm satisfied to the speed of this this rom, even overclocked in 604Mhz. i also removed soft botton that i flashed. sorry for my bad english.
Click to expand...
Click to collapse
me as well... i just set it on 710MHz... and it's running smooth and fast... i was just thinking by using those tweaks it will improve the performance to the next step... is there anything wrong with the soft buttons?
---------- Post added at 09:12 PM ---------- Previous post was at 09:03 PM ----------
i tried a lot of ROMs with different developer... but i always end up to this ROM... Thanks to "Mebitek"... it's just that when i tried to use the SIM Toolkit it won't give me anything...when tried to check my load balance it's always shows "Please try again"... did i miss something on this ROM?...
there's nothing wrong with soft buttpn, for me i dont want to change anything in a custom rom. i want it on what it has. i dont have any issue on my sim toolkit, it' s working perfectly.
rhonalddean said:
before the cm7 soft button came out, i use button savior... it's much comfortable to use a single tap...
---------- Post added at 08:55 PM ---------- Previous post was at 08:49 PM ----------
Thanks @ xxxraymond... doing a trial and error approach makes it perfect... hoping it won't hard brick my phone on frequent flashing... is there any incidence (hard brick) happened on frequent flashing?
---------- Post added at 09:03 PM ---------- Previous post was at 08:55 PM ----------
me as well... i just set it on 710MHz... and it's running smooth and fast... i was just thinking by using those tweaks it will improve the performance to the next step... is there anything wrong with the soft buttons?
---------- Post added at 09:12 PM ---------- Previous post was at 09:03 PM ----------
i tried a lot of ROMs with different developer... but i always end up to this ROM... Thanks to "Mebitek"... it's just that when i tried to use the SIM Toolkit it won't give me anything...when tried to check my load balance it's always shows "Please try again"... did i miss something on this ROM?...
Click to expand...
Click to collapse
so far i haven't experienced any problems with flashing yet though i've already flashed multiple roms in the past on this phone.
just a tip, if you are going to flash a stock rom via odin, be sure to use the one without a bootloader included (you can find it on the development section). its safe since it will not mess around your phone's boot partition (which causes hard bricks)
and if you are going to flash a rom via CWM Recovery, be sure to flash while your battery is still strong. make sure that you are not going to run out of battery in the middle of flashing or else, it may cause trouble
Thanks for the advise @ xxxraymond... i did try to flash a stock Rom from this location "yagyagaire.blogspot.com/2012/01/official-samsung-firmwares" and it seems to have no problem flashing it. can you tell me what the "bootloader" means? and why it should not be included in the Stock Rom? another thing... is there any Stock Rom Gingerbread 2.3.6 for "S5570DXKPD" baseband? i tried to use "JVKT1" working fine for me.. but it's not for Asian Rom...
---------- Post added at 10:03 AM ---------- Previous post was at 09:53 AM ----------
rexidi said:
there's nothing wrong with soft buttpn, for me i dont want to change anything in a custom rom. i want it on what it has. i dont have any issue on my sim toolkit, it' s working perfectly.
Click to expand...
Click to collapse
Can you tell me what stock Rom are you using and where can i download it? You're right... if stock Rom Sim toolkit is working fine... but if i'm using a custom rom, it's not working... beside from those custom rom developed from stock rom (Like "Emanon Rom")...
---------- Post added at 10:23 AM ---------- Previous post was at 10:03 AM ----------
Is there anyone can tell me what Custom Rom Gingerbread 2.3.6 is better for my baseband "S5570DXKPD" which is a Gingerbread 2.3.4 for Asian Rom... I did tried this "JVKT1" but the baseband (S5570XWKT2) appear with it is not for Asian Rom... Any help...
rhonalddean said:
Thanks for the advise @ xxxraymond... i did try to flash a stock Rom from this location "yagyagaire.blogspot.com/2012/01/official-samsung-firmwares" and it seems to have no problem flashing it. can you tell me what the "bootloader" means? and why it should not be included in the Stock Rom? another thing... is there any Stock Rom Gingerbread 2.3.6 for "S5570DXKPD" baseband? i tried to use "JVKT1" working fine for me.. but it's not for Asian Rom...
---------- Post added at 10:03 AM ---------- Previous post was at 09:53 AM ----------
Can you tell me what stock Rom are you using and where can i download it? You're right... if stock Rom Sim toolkit is working fine... but if i'm using a custom rom, it's not working... beside from those custom rom developed from stock rom (Like "Emanon Rom")...
---------- Post added at 10:23 AM ---------- Previous post was at 10:03 AM ----------
Is there anyone can tell me what Custom Rom Gingerbread 2.3.6 is better for my baseband "S5570DXKPD" which is a Gingerbread 2.3.4 for Asian Rom... I did tried this "JVKT1" but the baseband (S5570XWKT2) appear with it is not for Asian Rom... Any help...
Click to expand...
Click to collapse
im simple terms, the bootloader is the part of your phone which has the files/codes needed to startup you phone during boot. so if your phone's boot loader gets corrupted, it will result to what most people call a hard brick.
you can find the stock roms which has the bootloaders removed here http://forum.xda-developers.com/showthread.php?t=1551586
fyi: those stock roms can only be flashed via odin and is only applicable when going back to stock rom or when flashing a custom rom which requires you to have a clean/fresh stock rom first
i hope this helps
Thanks for the info @ xxxraymond... can i use this ROM even if my baseband is already in S5570DXKPD?...
- Dont have Task Manager.
- No
- No....
rhonalddean said:
Thanks for the info @ xxxraymond... can i use this ROM even if my baseband is already in S5570DXKPD?...
Click to expand...
Click to collapse
it should work as long as you are in gingerbread. although some devs recommend that you use 2.3.6 as base.
be sure to read the devs instructions before flashing and always create a nandroid backup using cwm recovery before doing it. trust me it can save you from a soft brick just in case something goes wrong
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
---------- Post added at 01:29 PM ---------- Previous post was at 01:22 PM ----------
rhonalddean said:
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
Click to expand...
Click to collapse
Sometimes the signal indicator get stuck... the signal still showed up even though you're out of the wifi range. until you do manual scan...
rhonalddean said:
@ xxxraymond... may i ask if you also experienced unstable wifi connection on this ROM? upon browsing, (mostly on Facebook Apps) it shows connection disabled even though there is at 1 to 2 bars wifi signal on it... before on stock rom i never experienced it, unless no signal detected. i was just thingking... is there any configuration setup to make this things get well?
---------- Post added at 01:29 PM ---------- Previous post was at 01:22 PM ----------
Sometimes the signal indicator get stuck... the signal still showed up even though you're out of the wifi range. until you do manual scan...
Click to expand...
Click to collapse
This is normal on most cm7 rom as I know it. When out of range it will show 1 or 2 bar but after a few second it will dissapear.
Sent from my GT-S5570 using Tapatalk 2
So it looks like Cyanogenmod 10.2 was released early this morning as a nightly. It's based on Android 4.3, which was released for the Nexus devices a few weeks ago I think.
I've been pretty happy with the nightly version of 10.1 I've had on my phone for a couple of weeks now, but I think I might backup my phone and see whether the latest version is worth keeping.
Anyone tried it already and have any comments?
Edit: Tried it, can't use it yet. Keyboard problems, freezing. Oh well.
Been running for about 4 hours at this point, all apps restored.
Had one blue screen reboot on screen wake.
First impression is that it is very smooth. Focal force closes so can't try that.
Camera works but is not stable.
Definitely a beta but off to a good start for the first 10.2. But I can't live with random reboots so back to 10.1-M3 for now.
10.2 has different vold configs
In the 10.1.2 nightlies I was able to manually edit /syste/etc/vold.fstab to swap internal and external sd-card.
This has changed under JB 4.3 and CM 10.2.x. Details are provided here:
http://source.android.com/devices/tech/storage/index.html
[ UPDATE ] Root also works differntly in JB 4.3, so that needs to be sorted as well.
srpanadero said:
Been running for about 4 hours at this point, all apps restored.
Had one blue screen reboot on screen wake.
First impression is that it is very smooth. Focal force closes so can't try that.
Camera works but is not stable.
Definitely a beta but off to a good start for the first 10.2. But I can't live with random reboots so back to 10.1-M3 for now.
Click to expand...
Click to collapse
I never restore apps when testing these cause it can cause problems. Did you use Titanium to restore the apps?
No. Just letting the restore function do it from the market.
I installed the nightlies of 8-16-13 and so far (no jinx) hasn't gave me any problems...ofcourse instagram video n pics don't work but other then that its good..so 10.2 cm is based on 4.3? I didn't see it in the tmo cm page...can u share a link if possible?
Sent from my SAMSUNG-SGH-T879 using xda premium
---------- Post added at 01:08 PM ---------- Previous post was at 01:05 PM ----------
I use helium and so far it's WAY better then titanium...titanium used to freeze on me when resorting data til I found helium...u can back up messaging and call history along with it all data...I highly recommend it..free on app store n premium idk I forgot how much it cost lol
Sent from my SAMSUNG-SGH-T879 using xda premium
angelf82 said:
..so 10.2 cm is based on 4.3? I didn't see it in the tmo cm page...can u share a link if possible?
Sent from my SAMSUNG-SGH-T879 using xda premium
---------- Post added at 01:08 PM ---------- Previous post was at 01:05 PM ----------
Click to expand...
Click to collapse
Yes, it is 4.3.
The test is to see if you can run for several days with no unexpected restarts. If you are able to do that , then be sure and post and tell others about it because that has been the problem for many months now.
All CyanogenMod downloads are always available at http://get.cm
Just scroll down to quincytmo on the left, then choose nightly on top left.
Cool...found it...now there's a newer nightly for 10.1 can I just flash the zip without restarting anythin? Thnx...
Sent from my SAMSUNG-SGH-T879 using xda premium
If you are running a 10.1 you can just run your cm updater and chosen the new 10.1 nightly.
If you go from 10.1 to 10.2, you should do a typical new ROM procedure. A backup, then factory reset, then flash the new ROM, then the 2013-8-13 gapps, then wipe dalvik and cache, then finally reboot.
I put the boot from the quincytmo 10.2 into the Pacman 4.3 alpha zip. Also using PA 4.3 gapps. Will let you know how it goes.
Been using it for almost 3days. Works great and smooth. At first, youtube seems to crash always, gps doesn't work and i can't download and even update my apps in playstore. (what i did is that reinstall youtube, and sign out my google acct. and then sign in it again to fix playstore and dunno how GPS was fixed . Wiping cache & dalvic cache and rebooting ma phone helped. And now everything's going and works so smooth! N i love it.
Btw focal doesn't work at all. Dunno how to fix it. Always crashes.
Other than that.. Still the best )
- Samsung Galaxy i9000
- cm 10.2
Thnks to devs!
Sent from my GT-I9000 using xda premium
U were able to use pac man 4.3 with tmobile phone? If everything looks good can u plz share the file? Thnx fraught...:thumbup::thumbup:
Sent from my SAMSUNG-SGH-T879 using xda premium
angelf82 said:
U were able to use pac man 4.3 with tmobile phone? If everything looks good can u plz share the file? Thnx fraught...:thumbup::thumbup:
Sent from my SAMSUNG-SGH-T879 using xda premium
Click to expand...
Click to collapse
You'll have to use TWRP for ATT. Also, flash the T-Mobile radio too. This isn't supported for T-Mobile so backup and flash at your own risk.
JamieD81's Pacman Rom 4.3
http://ppl.ug/T0mRM0lMhuk/
PA gapps 4.3
http://goo.im/devs/paranoidandroid/roms/gapps/pa_gapps-full-4.3-20130815-signed.zip
No reboots or anything, just a bit slow out of sleep mode. I went back to Padawan 9 for now as I'm going out tonight and don't want any surprises when I go to take a photo.
hahahaha true that...ok ima give it a shot! u are always helpful fraught! u should be a developer with all that knowledge you have and ure in LA i'm in Pomona so u ain't too far bro! well have fun n i'll post my experience of 4.3 pacman....oh have you injected anything on any other ATT roms? like pimpdroid rom? I think that's what its called...and I heard rootbox is good too...what about injected the bootimage to an official ATT JB rom? have you tried that?
angelf82 said:
hahahaha true that...ok ima give it a shot! u are always helpful fraught! u should be a developer with all that knowledge you have and ure in LA i'm in Pomona so u ain't too far bro! well have fun n i'll post my experience of 4.3 pacman....oh have you injected anything on any other ATT roms? like pimpdroid rom? I think that's what its called...and I heard rootbox is good too...what about injected the bootimage to an official ATT JB rom? have you tried that?
Click to expand...
Click to collapse
Honestly, all I'm doing is swapping files around with winrar. There has to be a compatible boot image though. Unfortunately, without a T-Mobile official JellyBean update, I don't think we can use ATT touchwiz JB roms. A shame as I installed Padawan JB on my friend's i717 and it was killer.
Really though, there are already enough 4.1.2 and 4.2.2 roms to keep me occupied for the time being. I've sort of shyed away from the 4.2 roms as of late and have been just playing with the very stable 4.1 setups as I don't want my phone rebooting on me while I'm at a party or want to have my camera instantly available.
Well to know how to swap files id be lost! I used to have a quincyatt and yeah padawan was really good but 4g speeds on tmobile network were horrible...yeah there are lots of roms but the more we get the more excited we get...
Sent from my SAMSUNG-SGH-T879 using xda premium
angelf82 said:
Well to know how to swap files id be lost! I used to have a quincyatt and yeah padawan was really good but 4g speeds on tmobile network were horrible...yeah there are lots of roms but the more we get the more excited we get...
Sent from my SAMSUNG-SGH-T879 using xda premium
Click to expand...
Click to collapse
What radio are you using with Padawan? I've just been using UVLG3 modem and it's been good enough for streaming youtube.
Ive been using that one and yes its really good but here I meant was I used to use blaze modem with att phone and it was horrible speeds...thats why I switched to tmo note...
Sent from my SAMSUNG-SGH-T879 using xda premium
Some of you may read the ATT Note forum. Over there the member ~SoulTaker~ has been compiling Cyanogenmod 10.2 on his own for those users. Because Cyanogenmod has not been creating 10.2 nightlies for the Note.
I have a compile and upload routine setup to produce UNOFFICIAL 10.2 nightlies for the Tmobile note if you want to try them. all are working OK so far, they are the same as what we would be getting from the Cyanogenmod build servers if they were building nightlies for us. All the standard warnings apply.
Here is the link to my google drive folder with the files. Click on the file you want, you will get an error because it can't preview, then look for the download arrow on the bottom right of the screen, click that.
Changelog is the regular 10.2 changelog (when it is up) and look between the date of the last file and the newest. http://10.2.cmxlog.com/?device=quincytmo
NOTE** I am just generating the zip file from Cyanogenmods github, not creating anything. So can't help you if you want a feature or fix or something.
Alright guys, this is the place for all Questions, Discussions about CM11 that are not development related.
This way, we can keep the dev thread clean, but still can have some discussions about CM11.
But please do not get too off topic, 'cause otherwise I will have the thread cleaned without further warnings
Cheers!
And a merry christmas y'all!
how i can take a photo? i dont see any option ?
the only question
what is the future of the camera in kitkat?
Taggin said:
how i can take a photo? i dont see any option ?
Click to expand...
Click to collapse
Camera doesn't work on KitKat for now
Sent from my LG Optimus 4X HD
About camera, we do know it's not working, we also do know why (system is unable to find the correct sensor (-modes)), but the fixing is not that easy. But we sure are working on it.
tf700 blobs were looking pretty promising though, so let's see
Questions?
Finally a Q&A thread
--------------------------------------
Well I wanna ask some questions if possible
* can I use Werewolf custom kernel (any kernel version) with this ROM for a better performance and some OC :laugh: and is it gonna be fully compatible with KitKat and @laufersteppenwolf are you gonna make CM11 version of your amazing custom kernel.
Also
* How is vidieo playback on KitKat, I heard that it's much worse than Jelly bean?!
* If you fix the camera soon are we gonna get @30 FPS while recording 1080p videos?
*is there any improvements in bettary life in Android KitKat?!
and finally
*is there any estimated date for a fully stable release?
------------------------------------------
Thanks to all Devs for this great work! :victory:
Sent from my LG Optimus 4X HD near Bethlehem
QuGhZx said:
Finally a Q&A thread
--------------------------------------
Well I wanna ask some questions if possible
* can I use Werewolf custom kernel (any kernel version) with this ROM for a better performance and some OC :laugh: and is it gonna be fully compatible with KitKat and @laufersteppenwolf are you gonna make CM11 version of your amazing custom kernel.
Also
* How is vidieo playback on KitKat, I heard that it's much worse than Jelly bean?!
* If you fix the camera soon are we gonna get @30 FPS while recording 1080p videos?
*is there any improvements in bettary life in Android KitKat?!
and finally
*is there any estimated date for a fully stable release?
------------------------------------------
Thanks to all Devs for this great work! :victory:
Sent from my LG Optimus 4X HD near Bethlehem
Click to expand...
Click to collapse
1. Yes, yes you can. Laufer may do, most likely will, might not, who knows, wait and see..
2. Haven't tried yet, but I didn't see anything bad with it in JB :s
3. You cannot tell how the camera will perform without knowing the fix, only time will tell.
4. Most likely from googles part, test it and judge for yourself.
5. No ETAs, because they can't predict when they're going to fix bugs can they? xD be patient..
Sent from my Nexus 7 using XDA Premium 4 mobile app
#Mr.G said:
1. Yes, yes you can. Laufer may do, most likely will, might not, who knows, wait and see..
2. Haven't tried yet, but I didn't see anything bad with it in JB :s
3. You cannot tell how the camera will perform without knowing the fix, only time will tell.
4. Most likely from googles part, test it and judge for yourself.
5. No ETAs, because they can't predict when they're going to fix bugs can they? xD be patient..
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
First Thanks for the Reply
and yes I knew I could use Google for some questions but I meat our device in particularly
and I'm gonna flash ROM with Google apps and test it tonight but when I was Backing up my current ROM with CWM 6.0.4.4 during Backup process it said android_secure not found and continued backup process and then it told me backup was successful, now if I tried to use the backup in the future would it work?
I think .android_secure is for when you install apps to SD. Your backup should restore fine.
Sent from my LG-P880 using Tapatalk
has anyone tried implementing EPRJ RIL in KK builds? @dcos i'm looking at you mostly, since you said you made it work back when they were still building it and had RIL issues.
also, thanks for christmas present guys, and merry christmas/happy new year to you all
Ok Google?
Guys! why I can't find Okay Google feature to call voice search?? I saw other KitKat ROMs for other devices and it already has that feature enabled !!
is it disabled for battery saving?
Hi. Since CM11 and Omni ROm have the same source, is it possible to switch between those ROM back and forth without clean install?
Btw, I'm using CM11
Edit: yes I can. With some force closes of course.
Also Real Racing always force closes, but it works fine in Omni
Only Chuck Norris can judge me
[/COLOR]
Flying_Bear said:
has anyone tried implementing EPRJ RIL in KK builds? @dcos i'm looking at you mostly, since you said you made it work back when they were still building it and had RIL issues.
also, thanks for christmas present guys, and merry christmas/happy new year to you all
Click to expand...
Click to collapse
Hi. And yes, I've included it to my PA 4 (4.4), and it's working nicely so it will be included in future releases.
I'm not ready to make first release yet since I'm lacking the time to test it thoroughly.
I'm considering taking one alpha tester, one that would use it and provide me logs, etc. So if you're interested let me know.
P.S. I'm not sure will I make until release before camera is working.
dcos said:
[/COLOR]
Hi. And yes, I've included it to my PA 4 (4.4), and it's working nicely so it will be included in future releases.
I'm not ready to make first release yet since I'm lacking the time to test it thoroughly.
I'm considering taking one alpha tester, one that would use it and provide me logs, etc. So if you're interested let me know.
P.S. I'm not sure will I make until release before camera is working.
Click to expand...
Click to collapse
unfortunately, i need a working stock rom these days, atleast a month or so i wont be able to flash anything new. if you can, can you tell me did you modify it in any way? if so, could you upload x3ril.smali somewhere, so i can add it to http://forum.xda-developers.com/showthread.php?t=2496075, and if you didnt modify it, could you tell me anyway so i can edit the topic and add that it works by default in 4.4 roms as well. thanks!
Hi guys i am still on my own 24.12 build and battery life is amazing i CANT get that life in omni dunno why IF these are the same sources od vendor device and kernel...
Sent from my LG-P880 using xda app-developers app
Do you upload that rom? I have old computer..OTL..
Sent from my LG-P880 using xda app-developers app
---------- Post added at 03:57 PM ---------- Previous post was at 03:52 PM ----------
gerciolisz said:
Hi guys i am still on my own 24.12 build and battery life is amazing i CANT get that life in omni dunno why IF these are the same sources od vendor device and kernel...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
do you Upload that rom? I have old computer... OTL..
Sent from my LG-P880 using xda app-developers app
I installed cm11 and I used titanium backup to restore all the apps I had with cm 10.2 nightly version.
I noticed that the browser (google chrome) became slower when loading a website, and when it comes to clicking on buttons it takes quite a lot of time that before it didn't, it's like I can't touch the screen or it'll make it harder.
The keyboard is improved, a bit faster than the 4.3 version.
Audio improvements as written in the main post.
Camera lacking (but it'll be fixed soon as I read it somewhere).
The overall system is more responsive and faster than Android 4.3.
I tried to use ART and I don't know, I didn't find much difference from using Dalvik, maybe just a bit with other apps, the browser (Google Chrome) is still a bit slower than 4.3.
I would like to ask if using ART could make loose data so far, and if it's too risky to use as it is now.
What about this laggy feeling with Google Chrome? It's the same using Dalvik or ART.. Anyone else did notice it?
Thanks
Edit: I found out via trickster mod that the cpuquiet was again on balanced instead of runnable, now Google Chrome works better, not perfectly but fine.
gerciolisz said:
Hi guys i am still on my own 24.12 build and battery life is amazing i CANT get that life in omni dunno why IF these are the same sources od vendor device and kernel...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
About 1 hour on-screen time with FB and a few calls. Better than anything before for me.
Adam77Root said:
About 1 hour on-screen time with FB and a few calls. Better than anything before for me.
Click to expand...
Click to collapse
Maybe i had bad luck this time ill try again later however i really like this cm even if i prefer omni
Sent from my LG-P880 using xda app-developers app
A few Peoble report that the screen don´t starting instant but with optimus play! kernel 2.53 the problem don´t existing :victory:
---------- Post added at 07:50 PM ---------- Previous post was at 07:23 PM ----------
scweeny said:
Do you upload that rom? I have old computer..OTL..
Sent from my LG-P880 using xda app-developers app
---------- Post added at 03:57 PM ---------- Previous post was at 03:52 PM ----------
do you Upload that rom? I have old computer... OTL..
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Laufsteppenwolf upload the rom:
http://forum.xda-developers.com/devdb/project/?id=1834#downloads
Q&A for [ROM][LG-L90][Linaro] PitchforkOS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LG-L90][Linaro] PitchforkOS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hey your project look nice and is fast so far i like that alot i guess u can call me fan but when i installed this rom i got a no service error and when i went to the mobile data options to search for my network which is tmobile it say error can not search for this user idk what hapen or what i did i thnk it the way i installed it but i doubt it i been flashing roms since the htc evo can you please fix this bug or problem im having thanks in advance
billymack928 said:
Hey your project look nice and is fast so far i like that alot i guess u can call me fan but when i installed this rom i got a no service error and when i went to the mobile data options to search for my network which is tmobile it say error can not search for this user idk what hapen or what i did i thnk it the way i installed it but i doubt it i been flashing roms since the htc evo can you please fix this bug or problem im having thanks in advance
Click to expand...
Click to collapse
Which variant of the L90 are you using?
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 11:35 PM ---------- Previous post was at 11:24 PM ----------
Scratch that, I just saw you said T-Mobile. So I'm assuming it's the D415, correct? If that's the case, explain to me exactly how you installed the ROM. Because I have 2 D415's here(mine and a buddy's), that I tested the ROM on prior to uploading it, and didn't have any mobile network issues. Let me know, I'll keep checking back!
Sent from my LG-D415 using XDA Free mobile app
CaptivateKing said:
Which variant of the L90 are you using?
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 11:35 PM ---------- Previous post was at 11:24 PM ----------
Scratch that, I just saw you said T-Mobile. So I'm assuming it's the D415, correct? If that's the case, explain to me exactly how you installed the ROM. Because I have 2 D415's here(mine and a buddy's), that I tested the ROM on prior to uploading it, and didn't have any mobile network issues. Let me know, I'll keep checking back!
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
I flashed the rom with twrp recovery i had wipe the dalvik/cahe,system, data than i installed it than i installed the gapps
---------- Post added at 11:09 AM ---------- Previous post was at 10:41 AM ----------
billymack928 said:
I flashed the rom with twrp recovery i had wipe the dalvik/cahe,system, data than i installed it than i installed the gapps
Click to expand...
Click to collapse
i am using the D415 model on the stock 5.0.2 lollipop that i flashed with lg flash tool using a .kdz
billymack928 said:
I flashed the rom with twrp recovery i had wipe the dalvik/cahe,system, data than i installed it than i installed the gapps
---------- Post added at 11:09 AM ---------- Previous post was at 10:41 AM ----------
i am using the D415 model on the stock 5.0.2 lollipop that i flashed with lg flash tool using a .kdz
Click to expand...
Click to collapse
Hmm, sounds like you installed it correctly. Which version of TWRP are you using? I'm on 2.8.5.0, and when I wipe data/cache/dalvik then install the ROM, I have no issues. I just had the time to sit down, and do a clean flash on both of the D415's I have in my possession, and they are both working fine. I'm trying to recreate the issue you are experiencing, but everything is working on my end
Sent from my LG-D415 using XDA Free mobile app
CaptivateKing said:
Hmm, sounds like you installed it correctly. Which version of TWRP are you using? I'm on 2.8.5.0, and when I wipe data/cache/dalvik then install the ROM, I have no issues. I just had the time to sit down, and do a clean flash on both of the D415's I have in my possession, and they are both working fine. I'm trying to recreate the issue you are experiencing, but everything is working on my end
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
I really like this rom but the mobile network data error im getting made me revert back to the lg stock 5.0.2 lollipop
billymack928 said:
I really like this rom but the mobile network data error im getting made me revert back to the lg stock 5.0.2 lollipop
Click to expand...
Click to collapse
Its like it doesnt even recognize my sim card and when im run the rom it sat imei and baseband unknown
billymack928 said:
Its like it doesnt even recognize my sim card and when im run the rom it sat imei and baseband unknown
Click to expand...
Click to collapse
jesus flash stock 4.4 kdz and then this rom...its all over this forum
I have tried to install the ROM twice. Both times I get some sort of keyboard malfunction and it won't pop up. I wonder if it could be the gapps I'm using. I like the absolute minimum gapps possible, so which one would work best?
I am using the latest TWRP. I have the latest CM 11 nightly and am on an LG d415.
Edit:
Never mind! Changed the gapps and it works great so far. Just have to see how the battery holds up now!
Great job so far!
danrb40 said:
I have tried to install the ROM twice. Both times I get some sort of keyboard malfunction and it won't pop up. I wonder if it could be the gapps I'm using. I like the absolute minimum gapps possible, so which one would work best?
I am using the latest TWRP. I have the latest CM 11 nightly and am on an LG d415.
Edit:
Never mind! Changed the gapps and it works great so far. Just have to see how the battery holds up now!
Great job so far!
Click to expand...
Click to collapse
Yea, you have to make sure you use the correct gapps package for each android version. For instance, 5.0 and 5.1 use different gapps packages, even though they are both lollipop. Glad you got it working though, hope you enjoy the ROM!
Sent from my LG-D415 using XDA Free mobile app
OK...this truly is a great working ROM but it is just rapidly eating my battery. I fully charged it and sat and watched as it fell 1 % every 3 to 4 min where as with cm 11 can listen to 8 hours of spotify and it drops a measly 20%. I even turned off all of the unnecessary things and went into privacy guard and denied the usual culprits (though I noticed some of them wouldn't let me like location and a few others). I did notice the processor jumping clear up to the highest speed and back down to the lowest quite a bit. Maybe its running too hot too much? I really don't know what I should be looking for in that area. At any rate I've switched back to CM 11 for now and everything is working fine so its not my battery...I will try it again as you develope it. Other than the battery problem I'm having its really awesome!
Sent from my LG-D415 using XDA Free mobile app
Battery life is pretty bad on all 5.0+ roms for us. Dont know why but it needs fixing.
On cm11 i charged my phone every 4-5days now every day or two...so its really sad
Not for me, my battery life on LP is far better than it was on KK
Wow, 1% drop every 3 min? I'm personally getting great battery life on this ROM. I can easily hit almost 6 hours of screen on time before I need to recharge (which to me is great, considering my nexus 4 struggled to reach 4.5 hours of screen on time) I'm not sure on that one, I'll see if anyone else has horrible battery drain
Sent from my LG-D415 using XDA Free mobile app
Too early to judge but for me battery life is better than on custom KK ROMs (and worse than on KK/Lollipop stocks)
Ok I'm gonna try the #3 version next, but what is a "clean" flash. I usually just do a factory reset and cache/dalvik. Is it something more than that? Maybe I'm doing it wrong?
Sent from my LG-D415 using XDA Free mobile app
danrb40 said:
Ok I'm gonna try the #3 version next, but what is a "clean" flash. I usually just do a factory reset and cache/dalvik. Is it something more than that? Maybe I'm doing it wrong?
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Nope, that's perfect! Most people like to dirty flash ROMs, meaning they just flash the ROM on top of their existing one, without wiping cache/data/dalvik. You are doing it just right though
Sent from my LG-D415 using XDA Free mobile app
Wifi keeps turning off
Flashed the latest build (beta 3), and seems pretty smooth. Video recording is working on my D415 . No auto focus for camera though and my wifi keeps disconnecting (will not turn back on). I have to reboot, then it works for a while, then turns off again.
bobl61 said:
Flashed the latest build (beta 3), and seems pretty smooth. Video recording is working on my D415 . No auto focus for camera though and my wifi keeps disconnecting (will not turn back on). I have to reboot, then it works for a while, then turns off again.
Click to expand...
Click to collapse
My video recorder works as well, but it doesn't save the videos anywhere. So it's practically useless for the time being. Not sure about your WiFi issue. I have the D415 as well, and my WiFi has been running strong for over 6 hours now
Sent from my LG-D415 using XDA Free mobile app
Random reboots
I have random reboots 2-3 times per day on D410. Both beta 2 and beta 3.
I use cwm cm12 from Quarx, may be I should try TWRP 2.8.5.0?