This is my first contribution to XDA. I noticed that only a few has released FTF for Xperia TX so I decided to generate one for 9.1.B.1.67 Generic Global.
This is still needed to be tested though just for precautions but I have tested this myself personally. All is working most especially radios, and the basic functions needed. So far no errors but still within the test stage in the next few days.
Just remember that I won't be held responsible if something happens to your device. Flash this at your own risk.
Would appreciate a feedback. Cheers, guys and Happy New Year!:victory:
Download:
http://www.mediafire.com/download/4byqiibbrrbfypl/Xperia%20TX%20Lt29i_9.1.B.1.67_Generic.zip/
Tools Needed:
Sony Flashtool by Bin4ry and Androxyde
Generic TX FTF
Patience
Instructions:
1. Install latest flashtool and drivers
2. Select the lightning bolt icon, then select flashmode
3. When flashtool shows that file has been prepared, connect your device in flashmode (phone must be off, hold Vol - then connect USB)
4. Wait until it finishes flashing
5. Boot the device. Initial boot can take a few minutes so be patient.
XDA:DevDB Information
Sony Generic Lt29i Firmware, a ROM for the Sony Xperia T
Contributors
izuall187
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Locked/Unlocked
Based On: Sony Stock
Version Information
Status: Testing
Created 2013-12-30
Last Updated 2013-12-30
Related
YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
Attention
The rom and the bootloader provided in this topic and to be used in a device where the Bootloader Binary has been changed to 3, devices where the binary has not been altered that is in Binary 1 or 2, it is not necessary to use these files to Downgrade. If you use and come, there is an error such as: Loss of IMEI, Battery Bug, Super Heating, Boot Random. I am not responsible for any errors caused by user error or misuse.
Instruction:
1º Download the most recent version of Odin or it can be the version also v3.10.
2nd Download the files needed to downgrade.
3º Open Odin, and in the AP put the file with the name (bootloaderDowngrade.tar) of the start to start the procedure. The unit will restart by itself. Go back in download mode again and in AP put the file (DowngradeMM6.0.1Binario.tar) of the start again leaves until the device restarts normally.
Note: The first start of it may take 5 to 10 minutes.
4º After the procedure is finished, the phone will restart with ROM STOCK MM 6.0.1, NO ROOT and NO MODIFICATION (ROM IS FACTORY). However this procedure did not allow updating by OTA, because in this procedure the Binary will still continue with B3 and file is with binary combination. But when installing any other ROM STOCK when passing them on ODIN, just do not put the Bootloader of 7.0 or 8.1.0 in the BL option. Only use the stock files as standard AP, CP and CSC.
Download:
bootloaderdowngrade.tar
downgradeMM6.0.1binario.tar
Donation:
Click Here
XDA:DevDB Information
STOCK MM 6.0.1 , ROM for the Samsung Galaxy J7
Contributors
darkfalling
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2018-11-07
Created 2018-11-07
Last Updated 2018-11-06
please tell will work on sm g610 s l k version korean variants which are on 8.1.0 u2 CSB1
FOR binary 8 to binary 1 and/or install firmware marshmallow? pls
STOCK FIRMWARE J7 PRIME INDONESIAPORTING FROM XSP WITH NEW BUILD G610FDXU1CRL2 FOR XID
Disclaimer :Your warranty will return.
I am not responsible for your device.
Before installing it! YOU choose to make this modification on your own intention, and if
You point your finger at me for messing up your device, I will laugh at you
Attention :Secure Folder still cannot be usedKnox remains disconnected
Installation :1. Download Odin 3.13.3 here2. Extract the firmware file you just downloaded3. You should get 5 files:AP (System &Recovery)BL (Bootloader)CP (Modem / Radio)CSC_*** (Country / Region / Operator)HOME_CSC_*** (Country / Region / Operator)4. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data5. Reboot your phone in Download / Odin mode:POWER + VOLUME DOWN + HOME BUTTON6. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)7. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot8. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
XDA:DevDB Information
G610FDXU1CRL2-XID, ROM for the Samsung Galaxy J7
Contributors
CuckooVG
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: -
Based On: XSP for XID
Version Information
Status: Stable
Current Stable Version: 9.5
Stable Release Date: 2019-04-28
Beta Release Date: 2019-03-30
Created 2019-04-26
Last Updated 2019-04-26
STOCK FIRMWARE J7 PRIME INDONESIAPORTING FROM XSP WITH NEW BUILD G610FDXU1CRL2 FOR XID
Disclaimer :Your warranty will return.
I am not responsible for your device.
Before installing it! YOU choose to make this modification on your own intention, and if
You point your finger at me for messing up your device, I will laugh at you
Attention :Secure Folder still cannot be usedKnox remains disconnected
Installation :1. Download Odin 3.13.3 here2. Extract the firmware file you just downloaded3. You should get 5 files:AP (System &Recovery)BL (Bootloader)CP (Modem / Radio)CSC_*** (Country / Region / Operator)HOME_CSC_*** (Country / Region / Operator)4. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data5. Reboot your phone in Download / Odin mode:POWER + VOLUME DOWN + HOME BUTTON6. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)7. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot8. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
Please Hit Thanks If You Like My Effort
XDA:DevDB Information
XIDG610FDXU1CRL2, ROM for the Samsung Galaxy J7
Contributors
CuckooVG
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: -
Based On: XSP to XID
Version Information
Status: Stable
Current Stable Version: 9.5
Stable Release Date: 2019-04-28
Beta Release Date: 2019-03-30
Created 2019-04-26
Last Updated 2019-04-26
STOCK FIRMWARE J7 PRIME INDONESIAPORTING FROM XSP WITH NEW BUILD G610FDXU1CRL2 FOR XID
Disclaimer :Your warranty will return.
I am not responsible for your device.
Before installing it! YOU choose to make this modification on your own intention, and if
You point your finger at me for messing up your device, I will laugh at you
Attention :Secure Folder still cannot be usedKnox remains disconnected
Installation :1. Download Odin 3.13.3 here2. Extract the firmware file you just downloaded3. You should get 5 files:AP (System &Recovery)BL (Bootloader)CP (Modem / Radio)CSC_*** (Country / Region / Operator)HOME_CSC_*** (Country / Region / Operator)4. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data5. Reboot your phone in Download / Odin mode:POWER + VOLUME DOWN + HOME BUTTON6. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)7. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot8. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
Please Hit Thanks If You Like My Effort
XDA:DevDB Information
XIDG610FDXU1CRL2, ROM for the Samsung Galaxy J7
Contributors
CuckooVG
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: -
Based On: XSP to XID
Version Information
Status: Stable
Current Stable Version: 9.5
Stable Release Date: 2019-04-28
Beta Release Date: 2019-03-30
Created 2019-04-26
Last Updated 2019-04-26
STOCK FIRMWARE J7 PRIME INDONESIAPORTING FROM XSP WITH NEW BUILD G610FDXU1CRL2 FOR XID
Disclaimer :Your warranty will return.
I am not responsible for your device.
Before installing it! YOU choose to make this modification on your own intention, and if
You point your finger at me for messing up your device, I will laugh at you
Attention :Secure Folder still cannot be usedKnox remains disconnected
Installation :1. Download Odin 3.13.3 here2. Extract the firmware file you just downloaded3. You should get 5 files:AP (System &Recovery)BL (Bootloader)CP (Modem / Radio)CSC_*** (Country / Region / Operator)HOME_CSC_*** (Country / Region / Operator)4. Add each file to it's respective field in Odin v3.13.3. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data5. Reboot your phone in Download / Odin mode:POWER + VOLUME DOWN + HOME BUTTON6. Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)7. Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot8. Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC
Please Hit Thanks If You Like My Effort
XDA:DevDB Information
XIDG610FDXU1CRL2, ROM for the Samsung Galaxy J7
Contributors
CuckooVG
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: -
Based On: XSP to XID
Version Information
Status: Stable
Current Stable Version: 9.5
Stable Release Date: 2019-04-28
Beta Release Date: 2019-03-30
Created 2019-04-26
Last Updated 2019-04-26