Database Develop

[ROM][P6800][OnHold]Ubuntu-touch dev preview(18.03.2013)

I have put this project on hold for now. I flashed latest Austrian ICS build to my device and continue using it as my Kindle reader on my travels. IF somone manages to fix the two issues with kernel, send me a message and I'll continue working with the repository. But for now I'm not thinking nor touching the subject before Easter. Thank you for participating for now
I've started porting Ubuntu-touch dev-preview to the Galaxy Tab 7.7 (3g). If you do not understand it already, you flash this at your own risk. There is now also a Ubuntu-touch specific device page here: https://wiki.ubuntu.com/Touch/Devices/p6800. I'll try to keep this thread and the Ubuntu devices page as close to each other as possible.
Big thanks to Daniel_hk for helping with boot.img Now It can be booted, but the screen is still black
Also, without working wifi and display, the preview is basically unusable... Next steps should be these:
1. Get wifi drivers working.
2. Get display drivers working.
Code:
[email protected]:/# uname -a
Linux localhost 3.0.15-CM-g1dc3074 #2 SMP PREEMPT Wed Mar 13 00:43:37 EET 2013 armv7l armv7l armv7l GNU/Linux
Repositories:
Latest release tagged with: "v0.3", not tested!
https://github.com/dun1982/android_device_samsung_p6800
https://github.com/dun1982/android_kernel_samsung_p6800
Download
cm-10.1-20130312-UNOFFICIAL-p6800.zip
Daily Ubuntu image: http://cdimage.ubuntu.com/ubuntu-touch-preview/daily-preinstalled/current/
Installation
Install CWM 6.0.2.8
Wipe data/factory reset
Wipe cache partition
Flash cm-10.1-20130312-UNOFFICIAL-p6800.zip to device
Flash quantal-preinstalled-phablet-armhf.zip to device
Reboot
Starting to use
Then it gets interesting (Black sreen for now now Run the following commands in your desktop system:
Code:
adb root
adb shell
ubuntu_chroot shell
You should have now root access inside your tabled. Continue with this wiki next
What works
Ubuntu-touch dev-preview is flashable.
It boots!
Known Issues
Kernel is based to the CyanogenMod/android_kernel_samsung_smdk4210, but it is a mess. So forked it, took code here and there (mostly from locerra's JB build).
Kernel is based 3.0.15 and no newer one available (yet).
Most of the drivers in kernel had to be turned off, because build was not succeeding...
bluetooth: Doesn't work
audio: Dock audio doesn't work.
hwcomposer: HDMI dongle doesn't work.
wifi: Doesn't work.
camera: Doesn't work.
.. and lot of kernel level bugs for sure.
Displaydrivers are not working (yet).
Release notes
Version 0.2 (13.03.2013) - Now it boots, see release notes
Version 0.1 (07.03.2013) - Intial release, nothing works
Credits
BIG THANKS to daniel_hk for solving the boot.img problem for me.
Anyone who has worked previously with the device/kernel source.
locerra (for getting CM10.1 to flashable state).

wowww!!! thank you !test now:victory::victory:

Placeholder for future.

Re: [ROM][P6800]Ubuntu-touch dev preview(02.03.2013)
Not 6810 versión?
AUs

el_campi said:
Not 6810 versión?
AUs
Click to expand...
Click to collapse
I cannot test it for anything else. The kernel sources are from CM10.1 that was in use from locerra, so in theory it should work with i815 and with p6810 as well. But I cannot give you any guarantees...
And also before I get this build to even start with my device, I do not think that sharing image would help anyone. But if you are a developer, I would like to talk with you on issues that I might have missed or done wrong. So contact me

Re: [ROM][P6800]Ubuntu-touch dev preview(02.03.2013)
any update?
Sent from my GT-P6800 using xda premium

Not much. The generated image is missing /data/ubuntu completely and that is the reason why the image does not boot. I got also flu and fewer, so I have had not that much time after the weekend to look on the issues on that.
I'm also waiting if I get any answers from Ubuntu touch emailing list regarding the problem and where to look for answers, but my quess is that it has something to do with the devices fstab file...

Good news everyone!
Just got a very good answer the problem I had with the /data/ubuntu-folder missing from the image. There was no image provided for the actual Ubuntu at all by the build-process...
When I get home from work, I'll try to find time to look into the build process if I can include the actual Ubuntu image to the ready made image and then release it after I get my device to boot. But it seems that I got the right nudge forward for this now :highfive:

Hmpf, still not booting. Now the /data/ubuntu logs are unmodified, which would point towards kernel or fstab-issue (ie. /data/ubuntu is never used...).

Re: [ROM][P6800]Ubuntu-touch dev preview(02.03.2013)
Good job :thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:
Sent from my GT-p6800 using xda premium

Doh... still not working... Any ideas anyone?

Ok, new version build from different repositories (thx, danile_hk for tip).
I'll test the new image this evening when I get back to home, and I have my fingers crossed that I can get the device to boot up and even display something useful. After that I can start looking for ubuntu developemnt

New version did not work, but then Daniel_hk gave me working boot.img. So now I need to find out what the heck is wrong with my repository and fix it so that I can get working boot.img from start and also the device configuration has issues. Both repositories are currently out of sync I'm afraid

dun1982 said:
New version did not work, but then Daniel_hk gave me working boot.img. So now I need to find out what the heck is wrong with my repository and fix it so that I can get working boot.img from start and also the device configuration has issues. Both repositories are currently out of sync I'm afraid
Click to expand...
Click to collapse
Also, without working wifi and display, the preview is basically unusable... Next steps should be these:
1. Get wifi drivers working.
2. Get display drivers working.

It seems that I hit the wall (again) with the mentioned big issues.
For now, I keep some sabbatical from Ubuntu Touch things (ie. I flashed ICS Austria to my device) and use it as my Kindle reader again.
If by miracle I get more info regarding how to get the Kernel working with Ubuntu Touch, then by allmeans I continue working with this project. So far it just seems that making a working image, is out of my hands currently.

At least you had a go. Thanks for your efforts, and hope you might have another crack at it later on.
I'm feeling a little bit that way right now too, and put my ICS kernel on the back burner. I think I'm trying to multitask a little too much at times....
Yep, a break is what you need, maybe some clarity will come after you've had a chance to recharge.
Sent from my GT-I9300 using xda premium

It's very nice to see you took up the big responsibility to make this superb device to be usable again! it has great specs, really. KUDOS bro!!

Any update on this development?

ZhenMing said:
Any update on this development?
Click to expand...
Click to collapse
Not much, I have had no interest to spend time with this topic because I have been very busy IRL. After I get my new house renovated fully and get my job tasks done, I wont be spending much time with this project. Feel free to use any sources provided in this thread to further advance the subject.
But this wont go forward that much, if the GT-P6800 wont get official CM10.1 update...

It works?

Android 4.4 Kit Kat Discussion Thread

This thread is for the developers to discuss the bugs and problems of the kitkat development for the p990.

Nice that you created a thread for kitkat! Really thanks
So for the progress on cm 11:
It is really difficult to find the cause of the dark screen, because we can't get an adb connection to working. The devices don't show up with adb devices
Maybe it is disabled at the moment
We can't take all changes from your slimroms repo, because cyanogenmod toke another way in handling backward compatibility. So for now we have a dark screen with cm 11 and no adb

Here are some of the threads from other tegra2 devices which I'm following:
Galaxy R: link
Galaxy Tab 10.1: link
Captivate Glide: link
Xoom: link
P990: link
Additional T2 devices where I didn't see any Kitkat related threads, yet:
Eee Pad TF101: link
Atrix 4G: link
All still suffer from the same problems, we need some proper workarounds (in frameworks/native most likely) to fix the hot reboots before we can move on to fix the smaller problems.
I've posted in some of them in order to help with other problems (like the set_metadata one where I send the fix to @DJNoXD as well), but I have no idea how to fix the hot reboots currently.
Personally I don't see a use in fixing various stuff as long as the device is too unstable thanks to the reboots (that's why you won't find any 4.4 thread from my so far).
I'm just collecting some information in this thread to have everything together.
Therefore some more stuff regarding the device stuck at boot which we faced earlier as well:
tonyp said:
The only way to fix the blobs would be an update by nvidia / the vendors - which isn't happening obviously.
So you need to workaround the limitations of the old EGL in the sources to re-add compatibility (which btw had to be done for Android 4.3 and partly Android 4.2 as well).
The reason that CM11 doesn't boot up for you is that CM hasn't merged the required patches.
The commits do exist on CMs gerrit though:
http://review.cyanogenmod.org/#/q/s.../android_frameworks_native+branch:cm-11.0,n,z
They're new implementations of the CM10.2 patches by arcee.
Note that in some first tests the new ones didn't work for me on my tegra2 phone anymore - somethings seems to be broken in them for the tegra2 architechture.
The OmniROM has (had? I think they partly reverted it here) used forwardports of the old CM10.2 patches - which the SlimROM has merged as well in a similiar manner.
But this only fixes booting, I still do have way to many hot reboots so some more stuff has changed in 4.4 - which I didn't manage to fix or workaround so far.
What we need is someone with that kind of deep hardware knowledge.
All in all: Blindly changing blobs or other libs won't help here at all. Just building against different framework/native trees won't either.
The surfaceflinger and probably some more stuff in frameworks/native needs to get worked on in code.
Currently there doesn't exist a tegra2 device which fully works to my knowledge - and I'm following a couple ones like the Galaxy R, the Xoom, the Transformer TF 101, the Atrix and the Galaxy Tab 10.1.
I'm working on the 2x, but have way too less time at the moment to dig any deeper into the code - while the current ROM boots (using my frameworks/native repo here) and has a working ril, wifi & storage it's nowhere near a daily driver thanks to frequent hot reboots.
Click to expand...
Click to collapse
Edit: Reminder: Do not spam in this forum section!
I will delete all "thanks" posts or similiar non-development related ones without a comment.

When i use the sources for frameworks native from @DJNoXD, i have less then 2 hot reboots a day. I even use it as daily driver with a work around for wifi.
I think if we could find the commits that broke the stability we could search for a work around or fix. I already tried it only for the sufaceflinger but i had no success, because it still worked properly, so it maybe is related to libgui or i think libui?
Took me hours for the surfaceflinger, so it will take even more time for all other in framework native. When i found some time during the week, i will try.
But KitKat is awesome related to RAM, Multitasking and performance.
Gesendet von meinem LG-P990 mit Tapatalk

Evervolv frameworks/native etc were no help getting the tf101 to boot omni. So far we're at Boot Animation
thx to
kishoreinme said:
Having the 3 perfhud .so files in /lib/egl/ causes this. Delete them and it boots
Click to expand...
Click to collapse
from this thread: http://forum.xda-developers.com/showthread.php?t=2517719&page=9
http://forum.xda-developers.com/showthread.php?t=2489841&page=7
Firtecy said:
When i use the sources for frameworks native from @DJNoXD, i have less then 2 hot reboots a day. I even use it as daily driver with a work around for wifi.
Gesendet von meinem LG-P990 mit Tapatalk
Click to expand...
Click to collapse
Is that the frameworks from slimrom or from https://github.com/DJNoXD/frameworks_av1 ?

dlumberg said:
Is that the frameworks from slimrom or from https://github.com/DJNoXD/frameworks_av1 ?
Click to expand...
Click to collapse
These are the repos that I use for slimrom:
https://github.com/p990-slimrom/

Here is the GalaxyR Omni 4.4.2 development link
http://forum.xda-developers.com/showthread.php?t=2576793

Eeeeh, have I been gifted with a special P990?
I've flashed Tonyp's 4.4 build named cm-11-20131213-UNOFFICIAL-p990 and I am pretty much facing no bugs. Only bug I could find on this fine evening was that USB doesn't get mounted, it charges when connected though.
Sound works, camera works, external SD card works, WiFi works, I bet GPS works but testing that will have to wait till the morning. All of this is on a clean CM11 build without doing any modifications at all. I too am still shocked over this and since I couldn't believe it myself, so I figured I'd post a video bringing this to light.
Short YouTube footage of my P990 running KitKat: YouTube
Could someone do a full wipe and see what they come up with by flashing that same build? It seems rather surreal if 4.4 only works this well on just my phone.
Please note, I have not been under the developmental processes of this project. This is simply testing - all credits to the developers!

USB tether will not work under windows because there are no drivers found. And it works fine under linux. How to fix the hardware id (vid,pid)?
Sent from my XT875 using XDA Premium 4 mobile app

{wip} slim jim rom

hello exhibit community,
i successfully compiled slim rom for the t599n. i need assisstance with the camera. when i run the camera from the terminal, the results are -->I/ActivityManager( 2129): START u0 {act=android.media.action.IMAGE_CAPTURE flg=0 - Pastebin.com. the camera app disables a few moments after initial boot. the logcat shows -->E/HAL ( 1672): load: module=/system/lib/hw/camera.montblanc.so E/HAL ( - Pastebin.com which is clearly the problem. the error is referencing this -->https://github.com/SlimRoms/frameworks_native/blob/kk4.4-caf/libs/binder/MemoryBase.cpp. i swapped the camera libs from various roms, showing the same result. my guess is, a build with non caf source for native. any advice is greatly appreciated.

brandonabandon said:
hello exhibit community,
i successfully compiled slim rom for the t599n. i need assisstance with the camera. when i run the camera from the terminal, the results are -->I/ActivityManager( 2129): START u0 {act=android.media.action.IMAGE_CAPTURE flg=0 - Pastebin.com. the camera app disables a few moments after initial boot. the logcat shows -->E/HAL ( 1672): load: module=/system/lib/hw/camera.montblanc.so E/HAL ( - Pastebin.com which is clearly the problem. the error is referencing this -->https://github.com/SlimRoms/frameworks_native/blob/kk4.4-caf/libs/binder/MemoryBase.cpp. i swapped the camera libs from various roms, showing the same result. my guess is, a build with non caf source for native. any advice is greatly appreciated.
Click to expand...
Click to collapse
Our device ( included in the STE Novathor family of devices ) requires several ROM level patches in order to function. Thats one of the main reasons why we have very little "official" support. My patches are located here:
https://github.com/Meticulus/android_device_samsung_codinalte/tree/carbon/patches
You may also find some on the slimroms gerrit by @Android-Andi such as this one here:
https://gerrit.slimroms.net/#/c/8269/
BTW, I believe that SlimRom's latest ROM is dubbed "SlimKat" and not "Slim Jim" LOL :laugh:

Meticulus said:
Our device ( included in the STE Novathor family of devices ) requires several ROM level patches in order to function. Thats one of the main reasons why we have very little "official" support. My patches are located here:
https://github.com/Meticulus/android_device_samsung_codinalte/tree/carbon/patches
You may also find some on the slimroms gerrit by @Android-Andi such as this one here:
https://gerrit.slimroms.net/#/c/8269/
BTW, I believe that SlimRom's latest ROM is dubbed "SlimKat" and not "Slim Jim" LOL :laugh:
Click to expand...
Click to collapse
cool. i built caf branch btw, i will cherry pick andi's diff, rebuild, and post results. my slow pc wont complete the build until tommorrow.

http://pastebin.com/cc48puVg <-patch 6 fails

i ported the libs from his slimrom and the camera works. everything works now. i dont have data atm, so testers after he allows me to host.

thanks for pemission to andi. i found a possible bug would like to squash before hosting. i found the sim i recieved with the phone and it is not detected. this is my first gsm device developing for cdma previously. when i tick network settings, screen turns blank and the proccess android.phone quit. if i tick 4g, settings quit. possibly the sim card is no good. i will host the rom tommorrow. got work.

im hosting the rom @ af if anyone is interested in testing http://androidforums.com/galaxy-exh...90-wip-rom-test-slim-jim-rom.html#post6745103. data has yet to be verified. i will update the op when it is. everything else is working.

data fixed^

[ROM] 5.0.* CyanogenMod 12.0

Hi, if anyone would like to run a 5.0.1 Google OS on a Archos G9 80S device (and currently basically verified only with this), download and extract the file
18_03_2015-20_58_50.7z
Installation (tested only with linux) :
- reboot into SDE menu and under "Format System" perform a "Reset Android & Storage" to clear all data of previous installations (this is really important for the first installation. Updating a existing installation (same major version) doesn't require this step !).
- reboot into SDE menu and under Developer Edition Menu -> "Export Data Partition"
- mount this usb drive
Code:
sudo mkdir <Mount_Path>/local
sudo cp archos.ext4.update <Mount_Path>/local/archos.ext4
sudo sync
sudo umount <Mount_Path>
- wait until the unmount process is done
- reboot into SDE menu and under Developer Edition Mernu , Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop
- Wait for reboot your devices : after reboot you can see Android prepares the system for a while .....be patient at least ~20 minutes for the first run!
What's new ?
------------ since 18_03_2015-20_58_50 -------------
tiler size modifications within kernel, suggested by stevemp (thanks!)
CM updates.
------------ since 15_03_2015-22_26_59 -------------
Netflix and widevine fixes from stargo (thanks!)
CM updates.
------------ since 09_02_2015-22_26_59 -------------
Only CM updates.
------------ since 12_12_2014-21_41_41 -------------
Initial release.
Kernel got some zram optimizations.
Rebuild: All used revisions for this release are stored in a separate folder in the archive.
Additions:
Archos Control Panel App from @mordesku: http://forum.xda-developers.com/showpost.php?p=47789812&postcount=88
Thanks: @stargo @Hashcode @trevd
@CM community @all the cool omap4 hackers where I taken some code and inspirations !!!
Without these peoples, It would not so easy to make some (working) builds of the CM-12.0.
Archive:
15_03_2015-22_26_59.7z
12_12_2014-21_41_41 / 12_12_2014-21_41_41 (devHost)
09_02_2015-22_26_59.7z
XDA:DevDB Information
Archos G9 CyanogenMod 12.0, ROM for the Archos Gen9
Contributors
Quallenauge
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: Cyanogenmod
Version Information
Status: Alpha
Current Beta Version: 12_12_2014-21_41_41
Created 2014-12-12
Last Updated 2015-03-18

Dankeschön
I now understand why TI exited the mobile SOC market - How can they expect to sell new stuff when the OMAP4xxx just won't die!
I shall give this one a whirl, It'll be good to get my archos off of the stock ICS.
I'm assuming you've dropped the recovery nonsense for that moment then?
is selinux off?
Is adb on a first boot? as I would recommend that folks leave it hooked up the computer after flashing that
way you can run adb logcat so you know what is going on. It sure beats watching a boot animation for ~20 minutes.
IIRC the 2012 nexus 7 took about 10 Minutes to boot so it's not far off.
I see you forked hotplugd! Let me apologize for the code quality, I was young and foolish and didn't know what I was doing ..
I think I might revisit it at some point or at least delete it lol
Anyway If I've got a bit of time / motivation I might have to have a cheeky hack on this , now that you've done all the hard work! .
I hope you don't mind but I've also given the file some re-hosting love just uploading it to devhost and androidfilehost too. I figured the space might aswell get used for something useful.. I'lll post the links when it's complete.:good:
Hack On! :good:
trevd
@Quallenauge dev-host link. If you want to add it to the first post. http://d-h.st/96J

Installed and i must say it's working really good :good:

schwatter said:
Installed and i must say it's working really good :good:
Click to expand...
Click to collapse
Hahahah! BI ZAR! I check the forum for my Archos 101 Gen9 Turbo once every X months, and checked it today and see LOLLIPOP / CM12?! GREAT!
And whats the status? I use the tablet a lot still, so what is NOT working?
Edit: Flashed it to a Archos 101 Gen9 Turbo, and all is working, and fast as hell. GREAT!

I came from Freezenook's ROM BUILD7 (VERY happy user) but now tried this:
A MA ZING!
How fast and cool this Lollipop is on our (old) Archos (101) Gen9 (Turbo) tablet!!!
For now only compliments and almost everything seems to work, and this is a major and recommended step! Great OS this Lollipop!
Tested
Speed: Good (17.106 AnTuTu 5.3)
Sound/Video: Yes
Touch: Very good
Camera: Yes
Battery: Good
Size: Lot of free space (3 - 4 GB free!)
Memcard: NOT TESTED YET
USB: Yes (with Archos Panel app (USB & deep sleep))(USB storage works)
MicroUSB: Only charging (no devices?)
HDMI: NOT TESTED YET
Headphone: Yes (low volume though)
Apps: Some apps I normally use on my tablet and phones (KitKat or older) are not (yet?) compatible, and cannot install. I really miss some, like Archos Video (Free)(MediaCenter.apk). Is it possible to port this APK to our new Lollipop, I would love that. And the other apps are just not there yet I guess (busy making them Lollipop compat)?

Thanks a lot !!

Supergeil!!!
Still amazing to see that you're still at it @Quallenauge
I will definitely flash it as soon as I have time.
The only concern I have is the USB Port. Does it stil work in 5.0 ? For me it didnt in 4.4, so I flashed back as I needed my Archos to read my Media USB-HDD. I have a 101S btw.
Well as soon as I have flashed it, I am going to test it and try a few things, hope I'll get it working :fingers-crossed:

Hi trevd!
trevd said:
I'm assuming you've dropped the recovery nonsense for that moment then?
Click to expand...
Click to collapse
This is not a "nonsense". But it doesn't reflect my current needs. It would be cool to have a standard recovery image to format the data partition with f2fs (The kernel should support it right now!).
trevd said:
is selinux off?
Click to expand...
Click to collapse
Yes. Currently I doesn't know how to enable selinux rules, because "rootfs" isn't the mounted loop device but the "real" root. So the file nods are forced to "ubject_r:unlabeled:s0" which doesn't fits.
trevd said:
Is adb on a first boot? as I would recommend that folks leave it hooked up the computer after flashing that
way you can run adb logcat so you know what is going on. It sure beats watching a boot animation for ~20 minutes.
Click to expand...
Click to collapse
Yes, ADB is turned on by default. I don't like it, when my device doesn't be verbose
trevd said:
I see you forked hotplugd! Let me apologize for the code quality, I was young and foolish and didn't know what I was doing ..
I think I might revisit it at some point or at least delete it lol
Click to expand...
Click to collapse
Yes, the old binary is bound to an older libsigchain.so. So I had to recompile it. The code quality is far better than my output So thanks for your work!
I have an issue with the ril implementation. Mobile signal is turned on, but the datakey pppd stuff is not called. Do you have an idea whats going wrong - where can I look.
Should I use your implementation from android_hardware_ril_libarchos_ril ?
trevd said:
@Quallenauge dev-host link. If you want to add it to the first post. http://d-h.st/96J
Click to expand...
Click to collapse
[/QUOTE]
Done. Thanks!

trevd said:
Dankeschön
I now understand why TI exited the mobile SOC market - How can they expect to sell new stuff when the OMAP4xxx just won't die!
I shall give this one a whirl, It'll be good to get my archos off of the stock ICS.
I'm assuming you've dropped the recovery nonsense for that moment then?
is selinux off?
Is adb on a first boot? as I would recommend that folks leave it hooked up the computer after flashing that
way you can run adb logcat so you know what is going on. It sure beats watching a boot animation for ~20 minutes.
IIRC the 2012 nexus 7 took about 10 Minutes to boot so it's not far off.
I see you forked hotplugd! Let me apologize for the code quality, I was young and foolish and didn't know what I was doing ..
I think I might revisit it at some point or at least delete it lol
Anyway If I've got a bit of time / motivation I might have to have a cheeky hack on this , now that you've done all the hard work! .
I hope you don't mind but I've also given the file some re-hosting love just uploading it to devhost and androidfilehost too. I figured the space might aswell get used for something useful.. I'lll post the links when it's complete.:good:
Hack On! :good:
trevd
@Quallenauge dev-host link. If you want to add it to the first post. http://d-h.st/96J
Click to expand...
Click to collapse
nilse said:
Supergeil!!!
Still amazing to see that you're still at it @Quallenauge
I will definitely flash it as soon as I have time.
The only concern I have is the USB Port. Does it stil work in 5.0 ? For me it didnt in 4.4, so I flashed back as I needed my Archos to read my Media USB-HDD. I have a 101S btw.
Well as soon as I have flashed it, I am going to test it and try a few things, hope I'll get it working :fingers-crossed:
Click to expand...
Click to collapse
External USB drive isn't supported right now. I will have a look, when I have some free time ( and after fixing the RIL mobile data connection stuff ).

Quallenauge said:
Hi, if anyone would like to run a 5.0.1 Google OS on a Archos G9 80S device (and currently basically verified only with this),
Click to expand...
Click to collapse
Wow, excellent! Thank you!
Could you please, write what you know that definitely doesn't and does work, as you did for older CMs?
Does ART work? Could CM 10.2 be updated to 12, or should we erase everything like with clean CM installation? HDMI?

@nilse: Yes USB (inc drives/storage) works (via Archos Panel app)!
@Bor-ka: Always do a full format/erase/factory settings etc, for SURE with a major leap like CM11 > CM12 or MORE!!
See my older post for a test of all hardware etc!
And again: Some apps I normally use on my tablet and phones (KitKat or older) are not (yet?) compatible, and cannot install. These apps are just not there yet I guess (busy making them Lollipop compat)?
I really miss some, like Archos Video (Free)(MediaCenter.apk). Is it possible to port this APK to our new Lollipop, I would love that!

thank you again for your great work.
Works on 80g9H 512 mb ram.
will test more functions and edit this post later.

@hackwerk, thanks!
For some reason unknown to me, there is no "export partition" in my SDE, so reformatting and copying to the /local/ is a little bit painful to me - should do it with adb shell.
But anyway, Archos Video Player is a show stopper for me. Since it is the only player that can natively play 720p/1080p movies on this tablet via DLNA/Samba. Tried MX player with latest codecs - no luck.
All
Did anybody compare deep sleep in CM with the stock ROM?
IIRC deep sleeped tablet with a stock ROM (4.*, 3.*) could lose only about 10 battery _a_week_ if not used. May be my memory deceives me, of course. But with CM 10.2 and no background tasks it drops by ~ 10% a night. (Didn't try Wakelock and Greenify though)

Bor-ka said:
@hackwerk, thanks!
For some reason unknown to me, there is no "export partition" in my SDE, so reformatting and copying to the /local/ is a little bit painful to me - should do it with adb shell.
But anyway, Archos Video Player is a show stopper for me. Since it is the only player that can natively play 720p/1080p movies on this tablet via DLNA/Samba. Tried MX player with latest codecs - no luck.
All
Did anybody compare deep sleep in CM with the stock ROM?
IIRC deep sleeped tablet with a stock ROM (4.*, 3.*) could lose only about 10 battery _a_week_ if not used. May be my memory deceives me, of course. But with CM 10.2 and no background tasks it drops by ~ 10% a night. (Didn't try Wakelock and Greenify though)
Click to expand...
Click to collapse
SDE: This ia an easy alternative way of installing the ROM (which I used)!
Video: Have you tried Skifta (good for network!) or other majors, like GoodPlayer, MediaPlayer Classic or the brand new official VLC Player (and thus MX Player))?
Maybe in combination with the "All Codecs for Archos Video" app?? Must be possible!
And maybe / I hope we can 'port' the MediaCenter.apk to Lollipop!
Battery: Is already good, but everyone talks about an app called Lux! And Greenify.
But yes Deep Sleep can be enabled in this ROM in the Archos Panel app too.
And maybe these famous mods can help too ( @Quallenauge: Checked them already I think?)?

hackwerk said:
SDE: This ia an easy alternative way of installing the ROM (which I used)!
Click to expand...
Click to collapse
Unfortunately I do not have "Enter the SDE menu on your device and select export data partition," in SDE.
See here, with screenshot http://forum.xda-developers.com/showpost.php?p=57243821&postcount=2
For video thanks, I'll try. Completely forgot about VLC. Tried MX already, it plays Ok from the internal memory/SD but gloriously fails over the network.
What Lux does is automagically lowers screen brightness, Yes, it is very useful app, but it will lower battery drain in the active mode, not in sleep when the screen is off. And it has a bad habit on my current cm10 installation - sometimes it restarts when I'm reading a pdf book at night (low memory?) and I get some two seconds of full brightness in my eyes. Ouch.. I think I'd revert back to manual "dimmer" or "blue light filter" and manual brightness adjustment.
What is strange, users at our local forum report that 5.0 is slower than the stock (?!) ROM on 80S 1.5 Turbo (4460) / 1GB RAM. I wonder what it will be like on my 1.2 (4430) / 512 RAM..

Thanks Quallange and all of you who helped him I saw your progress with 5.0 on github and I wanted to compile it myself but yeah I didn't had space for that sadly, I wanted to ask you flr it but then I see now that you got a cm12 thread when I am tomorrow home from school I will flash this :good:
Edit:
This song describes my 5.0 feeling:
http://youtu.be/p8sZcmQr6KY
It works till now pretty good. I am having the 512mb turbo version but after disabling things that I don't use it runs all smooth :good: o

I installed this Rom on my 101 g9 with 512 MB RAM.
It s like a new device. A lot less lagging and better ui response.
Only thing i found is that the keybord hides every now and then when i want to type some text.
Thanks a lot for this masterpiece of work *like*
Sent from my SM-N7505 using XDA Free mobile app

biggoof75 said:
I installed this Rom on my 101 g9 with 512 MB RAM.
It s like a new device. A lot less lagging and better ui response.
Only thing i found is that the keybord hides every now and then when i want to type some text.
Thanks a lot for this masterpiece of work *like*
Sent from my SM-N7505 using XDA Free mobile app
Click to expand...
Click to collapse
I agree, much more snappy than CM11. I've also had the keyboard hiding issue (stock and Swype). Thanks for keeping the G9 alive Quallenauge :good::good:

G9 80H
i installed the rom but it places data on internal storage. hard drive is placed at /storage/sdcard1 and is read-only
how can i place data on the hard drive?
Note: besides the internal storage issue, the rom runs nicely.

Hi Quallenauge.
Realy magic this ROM, many thanks.
If with JB sometime I have only 80 MB RAM free and with KK 145, now I have over 200 !!!
But I have a problem, app ( iGO ) can't write on external card.
Tried with 3 different SDFix and manually in system/etc/permissions/platform.xml
With Root Explorer I can copy, but can't modify permision.
There is a solution to this problem ?
Thanks in advance.

[Q] who wants a liquidsmooth lp rom

i like liquidsmooth 4.4.4 rom. really butter smooth, battery friend... i tried to build one from bauner but i couldnt.
wiil someone think about boulding??

by the way this is link for liquidsmooth 3.2 i uploaded to dropbox.
https://www.dropbox.com/s/w12eoq4xhmu7w5e/LS-KK-v3.2-2014-10-30-n7000.zip?dl=0
and gapps
http://www.drdevs.com/devs/teamliquid/Gapps/Liquid_gapps.4.4.4.build.8.1.zip

I am running LiquidSmooth that I built. Just download the source tree, then add the files from CyanogenMod.
I can't give you my build, because I modified the partition from standard. Before I barely had any space to install apps, so it kept running out. But I deleted the extra partitions and made it 1 big partition, so now the apps share the full amount of the internal storage, which in mine is 13 GB. To do that I had to wipe everything, repartition, and make changes to Android.

noterio said:
I am running LiquidSmooth that I built. Just download the source tree, then add the files from CyanogenMod.
I can't give you my build, because I modified the partition from standard. Before I barely had any space to install apps, so it kept running out. But I deleted the extra partitions and made it 1 big partition, so now the apps share the full amount of the internal storage, which in mine is 13 GB. To do that I had to wipe everything, repartition, and make changes to Android.
Click to expand...
Click to collapse
i tried before unsuccessfully. i havent enough knowledge to merge it so i left. but i maybe try again next. i like liquidsmooth. usefull, batteryfriendly,light... and maybe you ll share your work next days

Follow the CyanogenMod instructions to build that... then copy over the Samsung related files into the LiquidSmooth directory.

Yes would love an ls lp rom. One big partition is also something I'm longing for. Tired of moving apps to SD card etc.

hi. i have a problem with repo sync
Fetching projects: 99% (466/470) Fetching project SlimRoms/hardware_qcom_media-caf
having this error and repo sync dont go. any ideo about this?

noterio said:
Follow the CyanogenMod instructions to build that... then copy over the Samsung related files into the LiquidSmooth directory.
Click to expand...
Click to collapse
where can i get them. on cyanogen.github? and

http://wiki.cyanogenmod.org/w/Build_for_n7000

rsCpuIntrinsics_neon_Blur.o
i have this issue when compiling,
frameworks/rs/cpu_ref/rsCpuIntrinsics_neon_Blur.S: Assembler messages:
frameworks/rs/cpu_ref/rsCpuIntrinsics_neon_Blur.S:1503: Error: unexpected end of file in irp or irpc
/tmp/rsCpuIntrinsics_neon_Blur-c2eb50.s: Error: local label `"1" (instance number 2 of a fb label)' is not defined
clang: error: assembler command failed with exit code 1 (use -v to see invocation)
build/core/binary.mk:752: recipe for target '/home//liquid/system/out/target/product/n7000/obj/SHARED_LIBRARIES/libRSSupport_intermediates/cpu_ref/rsCpuIntrinsics_neon_Blur.o' failed
make: ***
[/home//liquid/system/out/target/product/n7000/obj/SHARED_LIBRARIES/libRSSupport_intermediates/cpu_ref/rsCpuIntrinsics_neon_Blur.o] Error 1
make: *** Bitmemiş işler için bekliyor....
and i couldnt find anything on google.

finally
i have compile a liquidsmooth 4.1 (android 5.1.1) rom and it boots but i have two big errors.
first phone reboots when turn off the scrren and second wifi doesnt work.
anyone, any idea about errors?

at last problems was solved i compiled liquidsmooth 4.1 and i am testing...

ls-lp-4.1
i compiled a working zip.
front camera not working.another things working for me. i wana share the zip for who want to test it.
before flash i am not a developer and only doing as hobby.
installation
first raw 12.1 kernel
full wipe
then rom+gapps+su
then reboot
thats all.
link.
https://www.dropbox.com/s/y5zxsxu4re46vgh/LS-LP-v4.1-2015-06-02-liquid_n7000.zip?dl=0

freedmm said:
i compiled a working zip.
front camera not working.another things working for me. i wana share the zip for who want to test it.
before flash i am not a developer and only doing as hobby.
installation
first raw 12.1 kernel
full wipe
then rom+gapps+su
then reboot
thats all.
link.
https://www.dropbox.com/s/y5zxsxu4re46vgh/LS-LP-v4.1-2015-06-02-liquid_n7000.zip?dl=0
Click to expand...
Click to collapse
You can take help for other developers who are building LP for N7000, for the things which are not working in your build.
All the Best.

gaurav-11 said:
You can take help for other developers who are building LP for N7000, for the things which are not working in your build.
All the Best.
Click to expand...
Click to collapse
yes bauner helped lot. but i think i missed something. i compiled the rom with bauners new kernel. its working more and front cam now working. i wish to share after video problem.

new test build
now working front cam
but not working on some videos especially web videos
for who want to try link
https://www.dropbox.com/s/picm1uu5ddlsuzv/LS-LP-v4.1-2015-06-10-liquid_n7000.zip?dl=0

freedmm said:
now working front cam
but not working on some videos especially web videos
for who want to try link
https://www.dropbox.com/s/picm1uu5ddlsuzv/LS-LP-v4.1-2015-06-10-liquid_n7000.zip?dl=0
Click to expand...
Click to collapse
Have you read my answer in my thread?
http://forum.xda-developers.com/showpost.php?p=61307508&postcount=6811
Will make the use of awesomeplayer any difference?
Here is also a commit which will fix the playback of some videos with nuplayer
https://github.com/bauner/cm-androi...mmit/fdd5b725a1620722416d12e1488f346eb9af59d6

bauner said:
Have you read my answer in my thread?
http://forum.xda-developers.com/showpost.php?p=61307508&postcount=6811
Will make the use of awesomeplayer any difference?
Here is also a commit which will fix the playback of some videos with nuplayer
https://github.com/bauner/cm-androi...mmit/fdd5b725a1620722416d12e1488f346eb9af59d6
Click to expand...
Click to collapse
sorry. i was some busy yesterday about family things. yes i read your answer and compare your source and liquid source. liquid had more samsung colorformat.i deleted them. and compiled a zip but not test yet. today i will add codecs too. thx

freedmm said:
hi. i have a problem with repo sync
Fetching projects: 99% (466/470) Fetching project SlimRoms/hardware_qcom_media-caf
having this error and repo sync dont go. any ideo about this?
Click to expand...
Click to collapse
hi could you tell me how you solved this problem

gogoo88 said:
hi could you tell me how you solved this problem
Click to expand...
Click to collapse
i redownloaded full source again.that is solved my problem. and if you have a 5.1 repo on your computer you can speed up with
(--reference=~/your repo location)
for ex. repo init --reference=~/pa -u git://github.com/LiquidSmooth/android.git -b lp5.1