Database Develop

[Q] Can't get past Recovery Mode - Need Help!

After rebooting for a cyanogenmod update which failed to install, my phone will not boot into Cyanogenmod - only clockwork.
I have precious data on the phone that I need to extract, mainly pictures.
ADB only recognizes the phone as "offline" and I cannot pull any files from it.
Any suggestions? Thanks a lot guys.

icer22x said:
After rebooting for a cyanogenmod update which failed to install, my phone will not boot into Cyanogenmod - only clockwork.
I have precious data on the phone that I need to extract, mainly pictures.
ADB only recognizes the phone as "offline" and I cannot pull any files from it.
Any suggestions? Thanks a lot guys.
Click to expand...
Click to collapse
did you cleared cache?
When you are trying to use adb your phone is in cwm recovery?

alray said:
did you cleared cache?
When you are trying to use adb your phone is in cwm recovery?
Click to expand...
Click to collapse
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.

icer22x said:
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.
Click to expand...
Click to collapse
Do you have a nandroid backup on your phone?
Also is all your drivers properly set and updated on your cumputer? Can you post a screenshot of Windows devices manager with the phone info?
Are you using the original usb cable? Some usb cables only have GND and 5V pins (no data). Also be sure to use usb 2.0 and a usb port directly from your motherboard (not in front of your computer) and don't use any usb hub.

Well I got it recognized by ADB now.
What is the file structure like in order to pull files from the phone?
What commands can I use in ADB to pull the main sd directory?

icer22x said:
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.
Click to expand...
Click to collapse
oh and when you are in bootloader, is fastboot working?
Code:
fastboot devices
does it says fastboot usb or only fastboot (in red)
I nerver used adb to pull files so idk. Maybe somthing like ''adb pull /sdcard/ C:\something'' ?
maybe you can find here
or use twrp to make a backup of your data, then pull the backup to your computer

alray said:
oh and when you are in bootloader, is fastboot working?
Code:
fastboot devices
does it says fastboot usb or only fastboot (in red)
I nerver used adb to pull files so idk. Maybe somthing like ''adb pull /sdcard/ C:\something'' ?
Click to expand...
Click to collapse
Thanks man. That helped.
If anyone ever finds themselves in this situation, make sure your SDK packages are updated to the latest Android OS version. This is why ADB was recognizing my device as offline.
Also, running the command adb pull /sdcard/ C:<somewhereonyourPC> will pull all the data from your HTC one.

icer22x said:
Thanks man. That helped.
If anyone ever finds themselves in this situation, make sure your SDK packages are updated to the latest Android OS version. This is why ADB was recognizing my device as offline.
Also, running the command adb pull /sdcard/ C:<somewhereonyourPC> will pull all the data from your HTC one.
Click to expand...
Click to collapse
oh nice to see adb pull /sdcard/ C:<somewhereonyourPC> was the right syntax :laugh:
For the sdk packages you should always make sure it is updated before doing anything to the phone. Same for drivers. An ''adb devices'' and ''fastboot devices'' won't hurt before messing with the phone to make sure everything set correctly.
Now I presume you'll be ok to flash your rom again?1

[Q] PLEASE HELP!! No OS after wipe

Hello!
I have an HTC one developer edition, I did an advance wipe of my phone because it wasn't charging, it said that USB Host mode was on. It only charged when the phone was off. I decided to wipe everything but the pictures (or so I thought) but once it finished the wipe the entire OS systems was erased, know the only thing I can do is enter TWRP.
Please Help I just bought the phone!

santiolaya91 said:
Hello!
I have an HTC one developer edition, I did an advance wipe of my phone because it wasn't charging, it said that USB Host mode was on. It only charged when the phone was off. I decided to wipe everything but the pictures (or so I thought) but once it finished the wipe the entire OS systems was erased, know the only thing I can do is enter TWRP.
Please Help I just bought the phone!
Click to expand...
Click to collapse
You just bought the phone? So why did you tamper with it? go back it store and exchange under warranty.

alray said:
You just bought the phone? So why did you tamper with it? go back it store and exchange under warranty.
Click to expand...
Click to collapse
I cant just change it i bought it on EBay. Plus I'm from Ecuador so its a long way from where I bought the phone...
alistondsouza I'm going to download Android SDK and try to do every step, thanks for helping me Ill keep you updated

alistondsouza said:
Read through...
http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
For step 6 which zip should I choose the same one that you have on the picture or a different one?
also what happens if the computer doesn't not read the phone ?

santiolaya91 said:
For step 6 which zip should I choose the same one that you have on the picture or a different one?
also what happens if the computer doesn't not read the phone ?
Click to expand...
Click to collapse
chose whatever rom you want as long its compatible with your device variant and compatible with your twrp version.
what do you mean by doesn't read the phone? its is not detected as sideload when you type ''adb devices''?

alray said:
chose whatever rom you want as long its compatible with your device variant and compatible with your twrp version.
what do you mean by doesn't read the phone? its is not detected as sideload when you type ''adb devices''?
Click to expand...
Click to collapse
so im on step 4, i dont know how to get the adb.exe file or the .zip on the folder. i cant even find those documents, do they get there automatically or what?
im sorry im new at this (as you can tell)
maybe somemore pictures or descriptions for step 4?

santiolaya91 said:
so im on step 4, i dont know how to get the adb.exe file or the .zip on the folder. i cant even find those documents, do they get there automatically or what?
im sorry im new at this (as you can tell)
maybe somemore pictures or descriptions for step 4?
Click to expand...
Click to collapse
download the android sdk from here http://developer.android.com/sdk/index.html

alray said:
download the android sdk from here http://developer.android.com/sdk/index.html
Click to expand...
Click to collapse
Yep, all ready did and also update 4.4 and 4.3

santiolaya91 said:
Yep, all ready did and also update 4.4 and 4.3
Click to expand...
Click to collapse
So adb.exe and fastboot.exe are located in ''platform-tools'' folder of the sdk.(adt-bundle-windows-x86_64-date/sdk/platform-tools/)
move your zip to that folder and open cmd prompt from that folder.

alray said:
So adb.exe and fastboot.exe are located in ''platform-tools'' folder of the sdk.(adt-bundle-windows-x86_64-date/sdk/platform-tools/)
move your zip to that folder and open cmd prompt from that folder.
Click to expand...
Click to collapse
ok im on that folder im currently downloading the .zip but its only adb and fastboot, not .exe.
am I doing something wrong, why wouldn't it appear like you tell me ?

santiolaya91 said:
ok im on that folder im currently downloading the .zip but its only adb and fastboot, not .exe.
am I doing something wrong, why wouldn't it appear like you tell me ?
Click to expand...
Click to collapse
.exe file extension might be hidden depending your windows configuration. Go ahead with the guide it should work.
Open a cmd prompt from that folder. (shift + right click in a blank space) (step 4)
with you device in twrp sideload mode (step 1,2,3 completed)
type in the cmd prompt:
Code:
adb devices
make sure it output your device s/n + sideload
then
Code:
adb sideload <name_of_rom>.zip
what rom did you downloaded?

alray said:
.exe file extension might be hidden depending your windows configuration. Go ahead with the guide it should work.
Open a cmd prompt from that folder. (shift + right click in a blank space) (step 4)
with you device in twrp sideload mode (step 1,2,3 completed)
type in the cmd prompt:
Code:
adb devices
make sure it output your device s/n + sideload
then
Code:
adb sideload <name_of_rom>.zip
what rom did you downloaded?
Click to expand...
Click to collapse
ok so i finally have everything ready, i downloaded http://htconeroot.com/htc-one-stock-roms/android-4-4-kitkat-sense-5-5-stock-rom-for-htc-one/ this rom
sense 5.5 with 4.4kitkad.
I do all the command but it says
error: device not found
my HTC is connected and it shows in the usd
when i type adb devices:
list of devices attached.
nothing else

santiolaya91 said:
ok so i finally have everything ready, i downloaded http://htconeroot.com/htc-one-stock-roms/android-4-4-kitkat-sense-5-5-stock-rom-for-htc-one/ this rom
sense 5.5 with 4.4kitkad.
I do all the command but it says
error: device not found
my HTC is connected and it shows in the usd
when i type adb devices:
list of devices attached.
nothing else
Click to expand...
Click to collapse
so your drivers aren't properly installed. download latest htc sync from htc website, it will install the drivers for you. then uninstall htc sync as it may interfere with what you are trying to do. (the drivers will remain installed)

santiolaya91 said:
I cant just change it i bought it on EBay. Plus I'm from Ecuador so its a long way from where I bought the phone...
alistondsouza I'm going to download Android SDK and try to do every step, thanks for helping me Ill keep you updated
Click to expand...
Click to collapse
Jus fastboot cwm or twrp...then install Rom of choice

alray said:
so your drivers aren't properly installed. download latest htc sync from htc website, it will install the drivers for you. then uninstall htc sync as it may interfere with what you are trying to do. (the drivers will remain installed)
Click to expand...
Click to collapse
Still nothing
same thing with or with out htc sync manager
i did this before anything else i dont know if it can interfere in any way
http://www.youtube.com/watch?v=CivvxcM1PCY

santiolaya91 said:
Still nothing
same thing with or with out htc sync manager
i did this before anything else i dont know if it can interfere in any way
http://www.youtube.com/watch?v=CivvxcM1PCY
Click to expand...
Click to collapse
did you typed ''adb device'' when the phone was booted in twrp?
Go in windows device manager and tell us how the device is listed.

alray said:
did you typed ''adb device'' when the phone was booted in twrp?
Go in windows device manager and tell us how the device is listed.
Click to expand...
Click to collapse
yes and it doesn't appear
this is what appears on device manager
when its on the bootloader-fastboot: Android usb device - my HTC
when its on twrp: portable devices WPD file system volume driver, (for like 20 seconds and then disappears)
When its off: under USB controllers as Unknown device
when its on htc screen: USB composite device ( another window opens saying drivers were not installed)

santiolaya91 said:
yes and it doesn't appear
this is what appears on device manager
when its on the bootloader-fastboot: Android usb device - my HTC
when its on twrp: portable devices WPD file system volume driver, (for like 20 seconds and then disappears)
When its off: under USB controllers as Unknown device
when its on htc screen: USB composite device ( another window opens saying drivers were not installed)
Click to expand...
Click to collapse
check my guide under faq #2

nkk71 said:
check my guide under faq #2
Click to expand...
Click to collapse
I don't have any option that says Other devices - ONE
just the ones i listed before.
I don't know if this helps in any way but i when to fastboot and the on CMD typed fastboot devices and it showed up, but if i go to twrp ADB sideload and type adb devices it doesn't show my device.

santiolaya91 said:
I don't have any option that says Other devices - ONE
just the ones i listed before.
I don't know if this helps in any way but i when to fastboot and the on CMD typed fastboot devices and it showed up, but if i go to twrp ADB sideload and type adb devices it doesn't show my device.
Click to expand...
Click to collapse
When its off: under USB controllers as Unknown device
Click to expand...
Click to collapse
have you disabled "Settings -> Power -> Fast boot"?
in either case it should show up as "Android ... -> My HTC"

[Q] W7 wont recognise phone when in fasboot mode

I've been struggling for a week with this.
Trying to unlock the bootloader but whenever I get to the stage of using command prompt I get this message;
'fastboot' is not recognized as an internal or external command,
operable program or batch file
The PC just will not recognise the phone when in fastboot mode although it does when not.
Windows 7
Android 4.3
HTC Sense Version 5.5
Software number 3.62.401.1
HTC SDK API Level 5.65
USB Debugging ticked
Fast boot deticked
HTC cable used
Latest drivers installed
Any help would be appreciated, the only previous experince I have is rooting a Galaxy note and tablet with no trouble whatsoever.
tj

tjpearson said:
I've been struggling for a week with this.
Trying to unlock the bootloader but whenever I get to the stage of using command prompt I get this message;
'fastboot' is not recognized as an internal or external command,
operable program or batch file
The PC just will not recognise the phone when in fastboot mode although it does when not.
Windows 7
Android 4.3
HTC Sense Version 5.5
Software number 3.62.401.1
HTC SDK API Level 5.65
USB Debugging ticked
Fast boot deticked
HTC cable used
Latest drivers installed
Any help would be appreciated, the only previous experince I have is rooting a Galaxy note and tablet with no trouble whatsoever.
tj
Click to expand...
Click to collapse
Do you have fastboot.exe on your computer? It looks like CMD isn't finding fastboot.exe 1-because you don't have it 2- because you have not started your cmd prompt from your fastboot.exe folder
can you post a screenshot of your cmd prompt when you get this error?

ADB Installer
Installed ADB Installer and now been able to copy and been able to submit my token.
Recieved email reply with unlock code and it came as a VLC icon, still put this onto my phone but now get message 'unable to open bin file'
Got one step further but now unable to open file.
Below is the message I get:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\tjpearson>fastboot flash unlocktoken Unlock_code.bin
error: cannot open 'Unlock_code.bin'
C:\Users\tjpearson>
Your help is very much appreciated but my wife fails to understand my pannick and she thinks out tea is more important so may not get back to you straight away.
tj

tjpearson said:
Installed ADB Installer and now been able to copy and been able to submit my token.
Recieved email reply with unlock code and it came as a VLC icon, still put this onto my phone but now get message 'unable to open bin file'
Got one step further but now unable to open file.
Below is the message I get:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\tjpearson>fastboot flash unlocktoken Unlock_code.bin
error: cannot open 'Unlock_code.bin'
C:\Users\tjpearson>
Your help is very much appreciated but my wife fails to understand my pannick and she thinks out tea is more important so may not get back to you straight away.
tj
Click to expand...
Click to collapse
Think you need to open the command prompt in the adb folder, and also have the unlock_code.bin in that same folder.

mb_guy said:
Think you need to open the command prompt in the adb folder, and also have the unlock_code.bin in that same folder.
Click to expand...
Click to collapse
OK, I'll try this tomorrow, thanks for the help.

Originally Posted by mb_guy
Think you need to open the command prompt in the adb folder, and also have the unlock_code.bin in that same folder.
Click to expand...
Click to collapse
OK, I'll try this tomorrow, thanks for the help.
Click to expand...
Click to collapse
Like mb_guy said, you MUST place the bin file in the same folder where adb and fastboot are. Every time you want to flash a file to your phone it must be in that folder, otherwise fastboot won't find it and it will output you that error (can't open file). That rule apply to recovery, unlock code, rom, kernel, ruu, firmware etc etc.
Sent from my HTC One using xda app-developers app

alray said:
Like mb_guy said, you MUST place the bin file in the same folder where adb and fastboot are. Every time you want to flash a file to your phone it must be in that folder, otherwise fastboot won't find it and it will output you that error (can't open file). That rule apply to recovery, unlock code, rom, kernel, ruu, firmware etc etc.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help because at least I've now been able to unlock bootloader.
My problem now is 'fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img' command line and yet again I'm getting error unable to open as below;
C:\Users\tjpearson>fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
error: cannot open 'openrecovery-twrp-2.6.3.0-m7.img'
Even placing zip on root of phone and in adb folder still no joy.
tj

tjpearson said:
Thanks for the help because at least I've now been able to unlock bootloader.
My problem now is 'fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img' command line and yet again I'm getting error unable to open as below;
C:\Users\tjpearson>fastboot flash recovery openrecovery-twrp-2.6.3.0-m7.img
error: cannot open 'openrecovery-twrp-2.6.3.0-m7.img'
Even placing zip on root of phone and in adb folder still no joy.
tj
Click to expand...
Click to collapse
''error: cannot open'' is caused because fastboot don't find the file. Is the recovery file you are trying to flash is named exactly <openrecovery-twrp-2.6.3.0-m7.img> ?
Btw I'll recommend you to flash twrp 2.6.3.3 not 2.6.3.0 as you could have issur flashing newer 4.4 rom
Code:
fastboot flash recovery <name_of_file.img>
fastboot erase cache
fastboot reboot-bootloader

alray said:
''error: cannot open'' is caused because fastboot don't find the file. Is the recovery file you are trying to flash is named exactly <openrecovery-twrp-2.6.3.0-m7.img> ?
Btw I'll recommend you to flash twrp 2.6.3.3 not 2.6.3.0 as you could have issur flashing newer 4.4 rom
Code:
fastboot flash recovery <name_of_file.img>
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Yes, named exactly the same.
It's driving me mad, if the bootloader is now unlocked is there an easier way to flash twrp and then root.
Whats the best way to check adb is actually communicating with the phone
tj

tjpearson said:
Yes, named exactly the same.
It's driving me mad, if the bootloader is now unlocked is there an easier way to flash twrp and then root.
Whats the best way to check adb is actually communicating with the phone
tj
Click to expand...
Click to collapse
Do you have a Sprint phone ? and can you post a screen shot of your adb / fastboot folder containing the files or at least post your results for dir
open command prompt from your adb / fastboot folder (shift+right click - command prompt here)
type
adb devices
your device SN will be here
type
adb reboot bootloader
you should be in fastboot usb
type
fastboot devices
again your serial no should be here
type dir
you should see the contains of the folder your in
now
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
if error change the twrp name to match the one in the dir command above

clsA said:
Do you have a Sprint phone ? and can you post a screen shot of your adb / fastboot folder containing the files or at least post your results for dir
open command prompt from your adb / fastboot folder (shift+right click - command prompt here)
type
adb devices
your device SN will be here
type
adb reboot bootloader
you should be in fastboot usb
type
fastboot devices
again your serial no should be here
type dir
you should see the contains of the folder your in
now
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
if error change the twrp name to match the one in the dir command above
Click to expand...
Click to collapse
I seem to have a problem adb detecting the connected phone, I'll unistall and start again and if I can then get back to you later I'd appreciate it very much.
The phone is UK on 02 Android 4.4 HTC Sense version 5.5
tj

tjpearson said:
I seem to have a problem adb detecting the connected phone, I'll unistall and start again and if I can then get back to you later I'd appreciate it very much.
The phone is UK on 02 Android 4.4 HTC Sense version 5.5
tj
Click to expand...
Click to collapse
can you check my guide under faq #2, if that solves it

Well, think I'll give up with rooting my HTC One, I have never had so much trouble routing a divice as this. My bootloader is now unlocked and that's about as far as I get.
My phone seems to have been detected once through adb that then allowed me to run unlock token but everything else just fails.
In one last attempt I've attached image of ADB folder and below is result from command line.
It must be my age because evertybing seems so complex nowadays
C:\Android>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
target reported max download size of 1526722560 bytes
error: cannot load 'openrecovery-twrp-2.6.3.3-m7.img': No error
C:\Android>

tjpearson said:
Well, think I'll give up with rooting my HTC One, I have never had so much trouble routing a divice as this. My bootloader is now unlocked and that's about as far as I get.
My phone seems to have been detected once through adb that then allowed me to run unlock token but everything else just fails.
In one last attempt I've attached image of ADB folder and below is result from command line.
It must be my age because evertybing seems so complex nowadays
C:\Android>fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
target reported max download size of 1526722560 bytes
error: cannot load 'openrecovery-twrp-2.6.3.3-m7.img': No error
C:\Android>
Click to expand...
Click to collapse
cannot load = MyFileNameIsWrong
and from the screenshot you posted the filename is: openrecovery-twrp-2.6.3.3-m7.img.img <- yes, double extension, next time do a "dir" in command prompt to see your filenames, not in Windows Explorer.

d -darrrrr
nkk71 said:
cannot load = MyFileNameIsWrong
and from the screenshot you posted the filename is: openrecovery-twrp-2.6.3.3-m7.img.img <- yes, double extension, next time do a "dir" in command prompt to see your filenames, not in Windows Explorer.
Click to expand...
Click to collapse
I love you nkk71, I really can't tell you how much I love you but I do !!!!! :victory:
Did what you said and fumbled through flashing twrp and then adding superuser after to the phones root, did recovery again and installed superuser via twrp and bingo, rooted and confirmed.
Been struggling 2 weeks with this and non stop all weekend, my wife wants a divorce but I don't care cos I'M ROOTED !!
Thanks so much for all the help, nice one :good:
tj

tjpearson said:
I love you nkk71, I really can't tell you how much I love you but I do !!!!! :victory:
Did what you said and fumbled through flashing twrp and then adding superuser after to the phones root, did recovery again and installed superuser via twrp and bingo, rooted and confirmed.
Been struggling 2 weeks with this and non stop all weekend, my wife wants a divorce but I don't care cos I'M ROOTED !!
Thanks so much for all the help, nice one :good:
tj
Click to expand...
Click to collapse
Lol
Now that the phone is good, go spend some time with your better half!!!
No guides on xda, on "how to return my marriage to stock"
Put the phone on the charger or something, and spend time with your significant other.
Sent from my HTC One using Tapatalk

One last question
nkk71,
Can I uninstall Superuser now and install SuperSU instead cos I've already purchased that when had the Note rooted or will it cause me more time away from the mrs with issues.
tj

tjpearson said:
nkk71,
Can I uninstall Superuser now and install SuperSU instead cos I've already purchased that when had the Note rooted or will it cause me more time away from the mrs with issues.
tj
Click to expand...
Click to collapse
Shouldn't be a problem, use the flashable zip from the thread: http://forum.xda-developers.com/showthread.php?t=1538053

Yeah , sorted.
Thanks again for all your help.
tj

[Q] Htc one M7 softbricked and can't connect to a computer

FYI: I am not tech savy at all so bare with me if I sound like a noob/idiot.
I basically formatted my phone from TWRP and I'm thinking there isn't any ROM/UI/kernel?..ect. so it cannot start up (basically stuck on the htc loading screen). My computer detects it but not as a storage device and I can't seem to find a way to access it. I believe I have what i need on my computer but my issue is that i dont know how to get into the internal storage of my htc one because it cannot detect it as a storage device on my computer.
The only trace of it at all i seem to be able to find is in
Control Panel\Hardware and Sound\Devices and Printers
Its called "android 1.0" and when i click on it, it takes me to its properties from device manager.
It says Location: Port_#0001.Hub_#0008
I dont know if any of this info i gave is relevant, if not, let me know what ups.

ray408 said:
FYI: I am not tech savy at all so bare with me if I sound like a noob/idiot.
I basically formatted my phone from TWRP and I'm thinking there isn't any ROM/UI/kernel?..ect. so it cannot start up (basically stuck on the htc loading screen). My computer detects it but not as a storage device and I can't seem to find a way to access it. I believe I have what i need on my computer but my issue is that i dont know how to get into the internal storage of my htc one because it cannot detect it as a storage device on my computer.
The only trace of it at all i seem to be able to find is in
Control Panel\Hardware and Sound\Devices and Printers
Its called "android 1.0" and when i click on it, it takes me to its properties from device manager.
It says Location: Port_#0001.Hub_#0008
I dont know if any of this info i gave is relevant, if not, let me know what ups.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2318497
Here is some reading material for you

Bro..I completely understand your predicament..
Just do this step by step
1. Download minimal adb from the internet and install it on your PC.
2. Download twrp image from the internet.this is a recovery loader.
3.copy the image file into the install directory of minimal adb.
4.execute the minimal adb shortcut from your PC.it should open a command prompt.
5.connect your device to the PC via usb.
6. Type this command to check if your device is recognized. "Fastboot devices"
It should show you a device ID..if your device is connected and recognized
7.flash tarp image with this command "fastboot flash recovery <twrp.img>"
8.reboot your device..press and hold volume down at the sametime to get into bootloader.
9.enter recovery.
10.Download any custom rom from htconeroot.com.it will be a zip file.
11. Copy the zip into minimal adb install directory and run this command to push the zip onto your device. "adb push <image file>.zip any name.zip"
12. After this completes you should be able to see this image in the filemanager in twrp.
13.move the zip file into sdcard directory.
14.make sure all options are checked in the mount in twrp
15.install the custom rom from install option in tarp.
This is 3 frantic days of research on the internet bro..
I had a brick in my hand too..got it up and running VIPERONE ROM
Hope you get through this fine

Thank you, i really appreciate the effort! but im stuck on step 6/7. When i typed in fastboot devices, it didn't show any new id. and when i typed fastboot flash recovery twrp.img it says "waiting on device" so im guessing it still didnt detect it. any idea on why this might be happening? thanks
gowda-the-grear said:
Bro..I completely understand your predicament..
Just do this step by step
1. Download minimal adb from the internet and install it on your PC.
2. Download twrp image from the internet.this is a recovery loader.
3.copy the image file into the install directory of minimal adb.
4.execute the minimal adb shortcut from your PC.it should open a command prompt.
5.connect your device to the PC via usb.
6. Type this command to check if your device is recognized. "Fastboot devices"
It should show you a device ID..if your device is connected and recognized
7.flash tarp image with this command "fastboot flash recovery <twrp.img>"
8.reboot your device..press and hold volume down at the sametime to get into bootloader.
9.enter recovery.
10.Download any custom rom from htconeroot.com.it will be a zip file.
11. Copy the zip into minimal adb install directory and run this command to push the zip onto your device. "adb push <image file>.zip any name.zip"
12. After this completes you should be able to see this image in the filemanager in twrp.
13.move the zip file into sdcard directory.
14.make sure all options are checked in the mount in twrp
15.install the custom rom from install option in tarp.
This is 3 frantic days of research on the internet bro..
I had a brick in my hand too..got it up and running VIPERONE ROM
Hope you get through this fine
Click to expand...
Click to collapse

ray408 said:
Thank you, i really appreciate the effort! but im stuck on step 6/7. When i typed in fastboot devices, it didn't show any new id. and when i typed fastboot flash recovery twrp.img it says "waiting on device" so im guessing it still didnt detect it. any idea on why this might be happening? thanks
Click to expand...
Click to collapse
Ok..try this..
Press down on the power and volume down button to enter the default boot loader.
If you hv rooted your phone..it should be showing tampered at the top.
select the fast boot option..
Now connect your phone via usb..
The display name should change to "fastboot usb"
Then again open minimal adb and continue from step 6.
Make sure you have all the htc drivers for Windows installed on your PC.
Windows can automatically download these drivers for you if you don't have them..
All the best

Are you using Windows 8.1?

everything works now, thank you guys. You are all awesome!

OnePlus3t bricked can only boot into fastboot, however my ADB driver no longer works

I have ran into a bit of an odd problem due to me messing up a root and then messing my phone up even more while trying to fix it.
my phone is fully bricked and only boots into fastboot mode. i tried to fix it with the one-plus fixer (idk its official name) but i got an error 7. I now need to re flash an older version of TWRP and try a diffrent method but i cant as my phone no longer is recognized in fastboot using the ADB tool. I have the USB driver installed on Windows. On Linux i ran the .sh script as root and it still doesn't work.
I have both Ubuntu and Windows installed on my PC so i can do whatever you suggest me to do regardless of the os.
Thank you to anyone that can help in advanced
Malte

This is not a hardbrick; a hard one wouldn't boot at all and give no sign of life (except when plugged to PC).
Try an unbrick tool to revert to official OOS. On Windows 7+ remember to disable signed driver enforcement.

You mention fastboot and adb. Which one are you using?
Just to make sure: While in the bootloader (fastboot mode), adb does not work. You have to use the fastboot commands. Installing TWRP would be:
Code:
fastboot flash recovery <name-of-img-file>
If that's what you're already trying, just ignore this post.

I want to be able to do that but if i do adb devices it no longer finds my phone
Didgeridoohan said:
You mention fastboot and adb. Which one are you using?
Just to make sure: While in the bootloader (fastboot mode), adb does not work. You have to use the fastboot commands. Installing TWRP would be:
Code:
fastboot flash recovery <name-of-img-file>
If that's what you're already trying, just ignore this post.
Click to expand...
Click to collapse
I want to be able to do that but if i do "adb devices" in the cmd/terminal it no longer finds my phone. so my goal is to be able to execute that command. However, i may be mistaken that it doesnt need to find my phone i can just execute that command

Ive done this but it didnt fix my phone.
przemcio510 said:
This is not a hardbrick; a hard one wouldn't boot at all and give no sign of life (except when plugged to PC).
Try an unbrick tool to revert to official OOS. On Windows 7+ remember to disable signed driver enforcement.
Click to expand...
Click to collapse
I did this last night but it never fixed my phone. it boots and then says "md5 checksum error" so im needing to try a diffrent approach but i cant because i cant flash anything onto it due to adb not finding my device now

Bandella said:
I want to be able to do that but if i do "adb devices" in the cmd/terminal it no longer finds my phone. so my goal is to be able to execute that command. However, i may be mistaken that it doesnt need to find my phone i can just execute that command
Click to expand...
Click to collapse
Like I said, the adb commands won't work while in the booloader (that's why it's called fastboot mode). You need to use fastboot commands... The equivalent command would be:
Code:
fastboot devices

Bandella said:
I did this last night but it never fixed my phone. it boots and then says "md5 checksum error" so im needing to try a diffrent approach but i cant because i cant flash anything onto it due to adb not finding my device now
Click to expand...
Click to collapse
I had the same issues with md5, all you have to do is try a different USB port. I suggest the ones on your motherboard if you're on a PC. Then run the tool as administrator. I hope this helps, good luck!
P.S if it still doesn't work, try a different PC, I'm 100% sure it'll work

Bandella said:
I want to be able to do that but if i do "adb devices" in the cmd/terminal it no longer finds my phone. so my goal is to be able to execute that command. However, i may be mistaken that it doesnt need to find my phone i can just execute that command
Click to expand...
Click to collapse
As Didgeridoohan touched upon, adb and fastboot (while related) are different. They have different requirements and applications.
adb won't work while the device is in fastboot mode. Conversely, when the device is able to use adb, fastboot commands won't work.
adb: only works booted to OS or alternately in TWRP. Debugging must be enabled
fastboot: only works in bootloader-fastboot mode. Debugging is not required to be enabled.
For flashing TWRP, it's fastboot that you need. Well, there is a way to do it with adb, but fastboot is by far the more common way.
When in fastboot mode, adb command won't work, and there fore it is completely expected that "adb devices" yields not response. Try "fastboot devices" (no quotes) and if you get the phone's ID in response, you are in business.

Bandella said:
...
my phone ... only boots into fastboot mode...
Click to expand...
Click to collapse
I've had this happen to me when I've triggered dm-verity. Instead of getting the dm-verity warning display the phone would simply boot straight back to fastboot.
My solution was to:
- flash the latest TWRP using
Code:
fastboot flash recovery <recovery file. img>
- reboot into recovery (use the volume keys on the phone to select recovery and then press the power key)
-flash the full stock image I was using before the problem started
This would clean up any changes made to the boot and system images and allow me to boot the system normally.
Note: because this leaves you with a stock kernel you'll end up with the stock recovery after you boot the system.
Sent from my OnePlus3T using XDA Labs

boot your PC into Ubuntu and install adb/fastboot (tons of guides available off the 'net). then boot your 3t to dl mode and connect it to your PC. as mentioned already "fastboot devices" should list your 3t and you should now be able to flash to your heart's content. no need for drivers, unlike under Windows. i have a bootable linux usb drive primarily for this reason. curious what script you're trying to run though..