Right now I'm attempting to boot into a custom recovery not on the phone. While my cmd window says that it works the bootloader freezes instead of booting into the custom recovery. Does anyone have any experience with this problem?
Foxxd said:
Right now I'm attempting to boot into a custom recovery not on the phone. While my cmd window says that it works the bootloader freezes instead of booting into the custom recovery. Does anyone have any experience with this problem?
Click to expand...
Click to collapse
you can no longer fastboot boot recovery .. you have to flash it
Related
Hey there
I am following this guide here:
http://forum.xda-developers.com/showthread.php?t=2265618
I am already familiar with this because I have had the HTC One X before. I unlocked the bootloader and then I flashed TWRP in fastboot and everything checked out on command prompt but it still won't boot into the custom recovery! A black screen shows up for a while but then it disappears and the HTC boot animation shows up and it boots into the software.
Does anyone know what could be the problem?
Thanks!
Never mind. The step I was missing was rebooting the device after flashing the custom recovery, I just tried to boot right in recovery instead.
Thanks!
I was running ARHD 10.1 and flashed TeamSeven's kernel in Clockwork Recovery. Went to reboot and the phone just boot loops, no big deal right. So when I put the phone back into bootloader screen and tried to boot into recovery it boots for about .50 seconds into my custom recovery then boots back to the Fastboot HTC Screen. Im unable to get into my custom recovery. Ive tried using the All in one tool to flash different recoverys and have been successful in doing so, I know this because they boot for the .50 seconds into TWRP or Clockwork then goes back into the HTC Fastboot screen. Does anybody have any ideas? How can I fix this? I tried to sideload a rom but it seems it will not let me until im able to get into my custom recovery.
Have you used ADB to delete cache, Then re-flash a recovery ? Then full wipe etc and clean install a Rom ?
Sent from my HTC One using Tapatalk 2
jthornton71707 said:
I was running ARHD 10.1 and flashed TeamSeven's kernel in Clockwork Recovery. Went to reboot and the phone just boot loops, no big deal right. So when I put the phone back into bootloader screen and tried to boot into recovery it boots for about .50 seconds into my custom recovery then boots back to the Fastboot HTC Screen. Im unable to get into my custom recovery. Ive tried using the All in one tool to flash different recoverys and have been successful in doing so, I know this because they boot for the .50 seconds into TWRP or Clockwork then goes back into the HTC Fastboot screen. Does anybody have any ideas? How can I fix this? I tried to sideload a rom but it seems it will not let me until im able to get into my custom recovery.
Click to expand...
Click to collapse
type fastboot erase cache from PC while phone is in fastboot. you should be able to get into recovery afterwards. If not, flash another recovery from fastboot. fastboot flash recovery RECOVERYNAME.img
Hello everyone, I need some help.
I Installed a custom rom (pac-man) on my Nokia x2 but now phone always restarts into recovery mode. no matter what i do.
I'm using cmw6.0.5.1 recovery, have tried twrp as well but no luck.
In order to boot into rom, first I've to reboot into bootloader mode and then type this command in terminal
Code:
Fastboot -i 0x0421 continue
to continue boot into rom.
Anyone know fix to this issue or any possible solutions?
You need to wipe and install the rom again
Thomson+ said:
You need to wipe and install the rom again
Click to expand...
Click to collapse
did that many times still boots into recovery. Installed another roms as well without any success.
So i flashed back stock recovery just now and it boots into system.
Hey Guys,
I just decided to install Twrp 3.0.2-2 and root my XT1092,
I have been facing issue right after flashing twrp, i select Recovery option in bootloader. Which just shuts down my phone.
After that i try to access recovery by booting into fastboot mode which again gives me a shutdown.
Later i discovered i could access stock recovery when my device is booted into the official mm rom. "adb reboot recovery"
Please help me guys. I tried fxz'ing and retrying the whole process. with different methods to no avail.
i even tried just rooting by only booting recovery "fastboot boot recovery.img" which again gives me a blank screen.
Any help would be really appreciated.
Device Details:
Moto XT1092
VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml
Regards,
Uzayr
Uzayr said:
Hey Guys,
I just decided to install Twrp 3.0.2-2 and root my XT1092,
I have been facing issue right after flashing twrp, i select Recovery option in bootloader. Which just shuts down my phone.
After that i try to access recovery by booting into fastboot mode which again gives me a shutdown.
Later i discovered i could access stock recovery when my device is booted into the official mm rom. "adb reboot recovery"
Please help me guys. I tried fxz'ing and retrying the whole process. with different methods to no avail.
i even tried just rooting by only booting recovery "fastboot boot recovery.img" which again gives me a blank screen.
Any help would be really appreciated.
Device Details:
Moto XT1092
VICTARA_RETEU_XT1092_6.0_MPE24.49-18_cid7_CFC.xml
Regards,
Uzayr
Click to expand...
Click to collapse
So you put the phone in bootloader mode:
fastboot flash recovery twrp-3.0.2-2-victara.img
Then you use only the volume rocker to select recovery (not the power button).
If the phone boots into stock Android, TWRP will be overwritten with stock recovery (which is useless), in which case you'll have to repeat the above.
same issue
on Verizon. Bootloader unlocked with code from Moto. Trying to use Windroid to finish up twrp install and root. I got a message in bootloader about mismatched partition size. tried ADB commands and said it installed. still won't work. no idea what to do next. was thinking of relocking and starting over but I would rather not. any suggestions? Thanks!
I have tried that as well. Used the volume rocker buttons to select recovery. I end up with a blank screen.
Tried fastboot flash recovery.img and I even tried mfastboot flash recovery as well.
Device just doesn't go to recovery after flashed through fastboot and selecting recovery.
Uzayr said:
I have tried that as well. Used the volume rocker buttons to select recovery. I end up with a blank screen.
Tried fastboot flash recovery.img and I even tried mfastboot flash recovery as well.
Device just doesn't go to recovery after flashed through fastboot and selecting recovery.
Click to expand...
Click to collapse
Is your bootloader unlocked? Maybe you should try reflashing the full stock firmware, and trying again.
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/
Gus Ghanem said:
So you put the phone in bootloader mode:
fastboot flash recovery twrp-3.0.2-2-victara.img
Then you use only the volume rocker to select recovery (not the power button).
If the phone boots into stock Android, TWRP will be overwritten with stock recovery (which is useless), in which case you'll have to repeat the above.
Click to expand...
Click to collapse
Gus Ghanem said:
Is your bootloader unlocked? Maybe you should try reflashing the full stock firmware, and trying again.
https://firmware.center/firmware/Motorola/Moto X (2nd gen-2014)/Stock/
Click to expand...
Click to collapse
Thanks a lot mate,
I had gone back to stock again. Finished with the recovery process.
I have been using the power button to select the highlighted option :silly: my bad.
Thanks for stressing that out.
I thought rooting would be the same as my 7 pro so I ran
Code:
fastboot flash boot magsik_boot.img
Now whenever my phone boots up it goes straight to the bootloader. Selecting Recovery Mode or Start both boot back into the bootloader.
Is there any way to reset my boot image?
can"t access through adb either?
My phone won't turn on now https://forum.xda-developers.com/t/...artition-when-the-phone-wont-turn-on.4433849/
But I don't believe adb would have worked since I was in the bootloader. Is there a way to use adb while in the bootloader?
UniquePhillip said:
My phone won't turn on now https://forum.xda-developers.com/t/...artition-when-the-phone-wont-turn-on.4433849/
But I don't believe adb would have worked since I was in the bootloader. Is there a way to use adb while in the bootloader?
Click to expand...
Click to collapse
You could then flash original boot.img for your current software.
Maybe you can extract the original boot partion from payload.bin and flash it back.
UniquePhillip said:
I thought rooting would be the same as my 7 pro so I ran
Code:
fastboot flash boot magsik_boot.img
Now whenever my phone boots up it goes straight to the bootloader. Selecting Recovery Mode or Start both boot back into the bootloader.
Is there any way to reset my boot image?
Click to expand...
Click to collapse
Firstly. Why did you flash it?
You should only boot images, that way you won't end up like this.
All you need to do is boot the original image. Not the patched one that obviously didn't work.
In the future. Just type fastboot boot then the name of the image.
Once you're in, open Magisk and click direct install.