Lost Root!!! - Xperia Z1 Q&A, Help & Troubleshooting

Hello!
Already got iHackers 2.0 + .290-kernel running (complete installed system) on rooted Z1 (C6903)!
Wanted to grant some apps SuperSu-permission and wanted to check within SuperSu which apps already got granted SuperSu-permissions. SuperSu showed up a message: binary must be updated! So I checked update normal way but install/download failed!
So I've searched www and found that someone mentioned to another guy (got same problem) to download Chainfire 1.51-flashable-SuperSu and this guy mentioned: flash in recovery and do update later on!
I tried and now ROOT HAS GONE!
Is it possible to use KingoRoot now again to get Root-permission back without loosing something (data, dual-recovery, xposed-stuff which is already installed, ...)?
How am i able to get binary for SuperSu up-2-date?
Thanks,
DES75

DESASTER75 said:
Hello!
Already got iHackers 2.0 + .290-kernel running (complete installed system) on rooted Z1 (C6903)!
Wanted to grant some apps SuperSu-permission and wanted to check within SuperSu which apps already got granted SuperSu-permissions. SuperSu showed up a message: binary must be updated! So I checked update normal way but install/download failed!
So I've searched www and found that someone mentioned to another guy (got same problem) to download Chainfire 1.51-flashable-SuperSu and this guy mentioned: flash in recovery and do update later on!
I tried and now ROOT HAS GONE!
Is it possible to use KingoRoot now again to get Root-permission back without loosing something (data, dual-recovery, xposed-stuff which is already installed, ...)?
How am i able to get binary for SuperSu up-2-date?
Thanks,
DES75
Click to expand...
Click to collapse
I got the pro version of SuperSu which fixed that binary problem for me.. As always make a back up of everything just in case. As far as I'm aware you do not have to factory reset or wipe data to root with KingoRoot.
Try it, otherwise I'd personally just go through the procedure again (and wipe data if needed) to get the root back. If you make a back up, it won't be a problem. Just a little time.

Hi!
Do have Pro-Version, too, but SU-Binary will not be updated! So I do need a way to get that SU-Binary updated without loosing Root, ...!
Thx,
DES75

DESASTER75 said:
Hi!
Do have Pro-Version, too, but SU-Binary will not be updated! So I do need a way to get that SU-Binary updated without loosing Root, ...!
Thx,
DES75
Click to expand...
Click to collapse
Strange, I had exactly the same message. Firstly have you got Busybox Installed? Try installing this then updating again.
I'm researching it, a lot of other threads saying you may need to reroot to get it working, but try the above first.
This may help http://forum.xda-developers.com/showthread.php?t=2059440
http://forum.xda-developers.com/showthread.php?t=1847939
P.s try and use the search button. :angel:

Related

[Q] SuperUser update problem

Hello there,
Last Sunday I updated my SuperUser apk to the latest version and attempted to update the SuperUser binary to 3.0.6 through the SuperUser app. The update process failed, however, and left me without a working binary. The last 2 days I've been trying to get SuperUser back up using all sorts of things, such as flashing a .zip from the SuperUser website, pushing the contents myself, and using both SuperOneClick and FlashTool, but to no avail. I really need SuperUser because of the limited hard disk in the X8.
I was hoping someone knew of another way of fixing this problem.
Also, is restoring the stock ROM (which I'm using anyways) using PCC or SEUS an option to getting my phone fully unrooted so I can reroot it?
Thanks in advance, Thom
Yes, you can restore the stock ROM via SEUS or PCC, you can re-root later.
It happened to me on sunday when i update superuser, i was using gingercruzt... i lost the root access i was not able to restore all my apps with titanium backup! so, i reinstalled gingercruzt. luck!
For me updated su works fine. Just install and update binary.
Sent from my X8 using xda premium
when i updated the binary, i lost the root access too...
is not necessary restore the original rom.
step1:
make a backup
step 2:
just download “su-3.0-bin-efgh-signed” and flash via CWM
step3:
enjoy again
step4:
remeber never again update the [email protected]%& binary
http://goo-inside.me/superuser/
if it doesn't work, try other SU's like 3.0.1-bin
Hello, my firs post but not last . When I was root x8 15 days before, I installed xRecovery and link2sd, and another app. So, after I update superuser to 3.06, I lost root permissions. Now, there is no chance to access to xRecovery menu, with meny times clicking (I never didn't update android 2.1 to another version 2.2 or 2.3....).
Any help?
Does anybody know how to resolve this?? Please...
crepljanin said:
Does anybody know how to resolve this?? Please...
Click to expand...
Click to collapse
sure you can't access the recovery? when i faced the problem, i was able anyway to enter recovery
@Svartehjerte
Thanks for reply.
Yes, I am sure . What you think, whether to again try to root my x8 whit superoneclick?

[Q] Left partially rooted after OTA update - any help?

Hi all, hope anyone can help.
My phone was all rooted no problem after unlocking my bootloader etc.
I did the latest OTA update and it went through all fine. I saw I still had superuser on my razr i so didn't think much of it.
I came to use a particular app the other day and realised it wasn't working.
I rebooted my phone and noticed for the first time that the unlocked that appears under the motorola sign (when I unlocked the bootloader it started displaying) was now missing.
I tried to update the binary settings on the superuser and it kept on failing. Then I downloaded root checker and it said my phone was incorrectly rooted.
So couple of questions if I may:
1 - how do I go about properly rooting my phone again....has my bootloader re-locked?
2 - how do I scrap the whole thing and go back to stock i.e removing superuser completely.
Thank you all and Merry Xmas!
wingy1 said:
Hi all, hope anyone can help.
My phone was all rooted no problem after unlocking my bootloader etc.
I did the latest OTA update and it went through all fine. I saw I still had superuser on my razr i so didn't think much of it.
I came to use a particular app the other day and realised it wasn't working.
I rebooted my phone and noticed for the first time that the unlocked that appears under the motorola sign (when I unlocked the bootloader it started displaying) was now missing.
I tried to update the binary settings on the superuser and it kept on failing. Then I downloaded root checker and it said my phone was incorrectly rooted.
So couple of questions if I may:
1 - how do I go about properly rooting my phone again....has my bootloader re-locked?
2 - how do I scrap the whole thing and go back to stock i.e removing superuser completely.
Thank you all and Merry Xmas!
Click to expand...
Click to collapse
Hi,
everything you described is normal after an OTA update. The unlocked image at startup is replaced by the standard one but your bootloader stays unlocked. Root access gets lost after the update but you simply have to re-root it as you did the first time. (root exploit or root zip for cwm)
look here:
http://forum.xda-developers.com/showthread.php?t=1928509
http://forum.xda-developers.com/showthread.php?t=1974097
I hope this helps.
Merry Xmas
boriwei said:
Hi,
everything you described is normal after an OTA update. The unlocked image at startup is replaced by the standard one but your bootloader stays unlocked. Root access gets lost after the update but you simply have to re-root it as you did the first time. (root exploit or root zip for cwm)
look here:
http://forum.xda-developers.com/showthread.php?t=1928509
http://forum.xda-developers.com/showthread.php?t=1974097
I hope this helps.
Merry Xmas
Click to expand...
Click to collapse
Nice one thanks for your help. If I want to un-root my phone - can you or anyone advise on how best to do it from where my phone stands now?
wingy1 said:
Nice one thanks for your help. If I want to un-root my phone - can you or anyone advise on how best to do it from where my phone stands now?
Click to expand...
Click to collapse
hey
1. go to settings/apps/ and search the app superuser and deinstall updates (only if you had some,if not skip this)
2. use rootexplorer or another with same functions, go to System/Apps and delete the Superuser.apk
3. go to playstore and install the Superuser app(yes its right)
4.rootexplorer again, go to System/bin and delete SU
5. go to playstore and deinstall Superuser.. done
credits.HSD-Pilot (handy-faq.de)
best regards
merry christmas
pangyaaaaaa said:
hey
1. go to settings/apps/ and search the app superuser and deinstall updates (only if you had some,if not skip this)
2. use rootexplorer or another with same functions, go to System/Apps and delete the Superuser.apk
3. go to playstore and install the Superuser app(yes its right)
4.rootexplorer again, go to System/bin and delete SU
5. go to playstore and deinstall Superuser.. done
credits.HSD-Pilot (handy-faq.de)
best regards
merry christmas
Click to expand...
Click to collapse
Cheers but I won't be able to do this I think as superuser is a system file that I cannot remove without being fully rooted first so therefore I guess I will have to re-root it to unroot it lol.
zediuen and
wingy1 said:
Cheers but I won't be able to do this I think as superuser is a system file that I cannot remove without being fully rooted first so therefore I guess I will have to re-root it to unroot it lol.
Click to expand...
Click to collapse
yep i think so.

[Problem] Wifi isnt working after "rooting" I9305

Hello there everyone, total noob here.
I have tried to "root" my S3 LTE using this method: http://forum.xda-developers.com/gal...-cf-root-cwm-recovery-ported-supersu-t1914394 (or more likely this: http://forum.xda-developers.com/showpost.php?p=45291825&postcount=306 ). Everything went great, Odin has shown a pass and it was successful while installing CWM, then I installed Supersu through CWM (only thing I did differently was putting a supersu zip file on internal storage) and that was a success too. I did everything like it said, even without plugging out my phone. After rebooting everything went down...
1. Knox is blocking SuperSU, someone reccmmended that I should have tried to disable it by installing supersu.apk manually, but then it has shown a popup that supersu doesnt have access to binary files. I have checked with root checker and it said that device isnt rooted...
It wouldnt bother me much, because having root isnt necessity for me, but...
2. I cannot access internet via wifi. It connects to router, signal is pretty decent, but still, when I try to use a build-in browser/chrome it just doesnt connect. Nevertheless, I can connect via 3/4g with no problems at all.
Now, I dont have root AND internet access.
Other info that might me useful:
Android 4.3
Null IMEI: no
Baseband: i9305XXUEMK1
I have performed factory reset, still no use.
Any help regarding repairing wifi, getting root access or bringing back state before "rooting" would be appreciated.
Regards,
Maziu92.
Maziu92 said:
Hello there everyone, total noob here.
1. Knox is blocking SuperSU, someone reccmmended that I should have tried to disable it by installing supersu.apk manually, but then it has shown a popup that supersu doesnt have access to binary files. I have checked with root checker and it said that device isnt rooted...
It wouldnt bother me much, because having root isnt necessity for me, but...
Click to expand...
Click to collapse
Just download the "SuperSU version 2.02" apk and install it. Its provided in this thread. (its newer than whats currently on Google play)
http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
It will ask to disable KNOX. select YES.
Maziu92 said:
2. I cannot access internet via wifi. It connects to router, signal is pretty decent, but still, when I try to use a build-in browser/chrome it just doesnt connect. Nevertheless, I can connect via 3/4g with no problems at all.
Click to expand...
Click to collapse
The best thing i can suggest you is moving to the new 4.4.4 Stock Rom
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
Use Odin v3.07
and then (if u want) root it using "CF-Auto-Root-m3-m3zh-gti9305.tar.md5."
and install "SuperSU version 2.02"
tharinduwijewardane said:
Just download the "SuperSU version 2.02" apk and install it. Its provided in this thread. (its newer than whats currently on Google play)
http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
It will ask to disable KNOX. select YES.
Click to expand...
Click to collapse
Oh, I did it, that's why it said the binary was missing. But I did it other way around:
1. I have flashed CWM like it said in second link provided in first post
2. Installed SuperSU 2.02 from zip file on internal card though CWM instead of file provided in thread (I could have installed remove-boot-recovery too, but I didnt notice that I needed that. Anyway, I did that later)
3. Rebooted and tried to turn on - supersu was still blocked by knox :/ BUT!
4. I have installed manually supersu.apk, then opened it via installator (important! Dont tap 'done' but 'run'!) and next I didnt get the "missing binary" popup but if I want to disable KNOX. Well, yeah, I do, so I tapped OK and it looped and looped... http://www.reddit.com/r/galaxys5/comments/2a92qq/supersu_stuck_disabling_knox/cisq087 found this soulution and it worked (reboot phone and start supersu again). Sorry about my short memory, but I think I needed to install supersu.apk manually again and tap disable once more time, but disabling KNOX took a few seconds.
5. And then I went to the settings in Supersu and tapped option 'install supersu into /system', rebooted and it worked fine!
5.a To make sure it really works I downloaded (via 3g ) Root checker and it said it is rooted.
So now I have root, yaay, but still no Wifi access :/
tharinduwijewardane said:
The best thing i can suggest you is moving to the new 4.4.4 Stock Rom
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
Use Odin v3.07
and then (if u want) root it using "CF-Auto-Root-m3-m3zh-gti9305.tar.md5."
and install "SuperSU version 2.02"
Click to expand...
Click to collapse
I have been using odin 3.07.
Really, It is the only way to get back wifi? Are there any other options apart this?
Nooby questions:
-will it work with my phone? It says that its "MODEM: I9305XXUFNI3" and mine is XXUEMK1.
-in the meantime I have read about efs files/folder, what are they for and should I somehow backup them?
-while flashing 4.4.4 it is possible that my IMEI will go null?
-will it be possible to go back to 4.3?
I dont want to brick it or anything, thats why I am asking.
And of course, thanks for your help, Tharinduwijewardane ^^
Edit:
Actually, I have managed to repair my WIFI connection without flashing new rom etc.... So what was wrong, you will ask? Me.
I have downloaded adblock (before factory reset) and it asked to connect via proxy, so I did. And then I have disabled it because it was blocking SuperSU along with KNOX. And my phone tried to connect with internet via proxy, but it couldnt, because of this configuration.
Found this by complete coincidence (my GF told me to check if I get connection though Chrome and it said that it cant connect because of proxy settings). It is strange that this configuration was still there, even after factory reset.
Oh well, case solved, thanks again for helping and even everyone else for checking this out^^
glad to hear u got it fixed.
:good: :good:

What am I Doing Wrong Here?

Hello everyone! Last night I used Sunshine to unlock/s-off to root/unlock my phone. this morning i tried to install SuperSU, but got a message stating that the binary wasn't installed and SuperSU couldn't install it. I have done some searching on this, have tried to uninstall/reboot/reinstall SU, but each time I get the same error message. Iinstalled TWRP, but since I dont have super user access, it just closes, and because the binary isnt installed for SU, it just closes as well.
So, what I am trying to figure out is how to get superuser installed so twrp works, and i so i can on my merry flashing way. Any help you guys can give would be great!
Thanks
tammerlane said:
Hello everyone! Last night I used Sunshine to unlock/s-off to root/unlock my phone. this morning i tried to install SuperSU, but got a message stating that the binary wasn't installed and SuperSU couldn't install it. I have done some searching on this, have tried to uninstall/reboot/reinstall SU, but each time I get the same error message. Iinstalled TWRP, but since I dont have super user access, it just closes, and because the binary isnt installed for SU, it just closes as well.
So, what I am trying to figure out is how to get superuser installed so twrp works, and i so i can on my merry flashing way. Any help you guys can give would be great!
Thanks
Click to expand...
Click to collapse
Actually nevermind.....i'm going to continuing reading through the phone book of replies on the supersu 2.13 thread. This can be closed for now.
You don't need root for a custom recovery on this device .
You unlock bootlooader 1st,custom recovery 2nd, install SuperSU.zip using custom recovery,3rd is cause you need superuser to gain S-OFF with Sunshine.
jball said:
You don't need root for a custom recovery on this device .
You unlock bootlooader 1st,custom recovery 2nd, install SuperSU.zip using custom recovery,3rd is cause you need superuser to gain S-OFF with Sunshine.
Click to expand...
Click to collapse
Not true...Sunshine does not require any of those.
When you run the apk from the website it ask for root permission. I'm S-OFF from using Sunshine
Edit : your right thank you for correcting me

[SOLVED] Safe to continue?? or start again? please help

This is driving me nuts... I was on 5.1.1 and I am trying to get it rooted.
I'm following a guide which goes like this..
1. downgrade to kitkat 4.4 using flashtool
2. root 4.4
3. Install custom recovery
4. Flash 5.1.1 pre-rooted zip
I have had problem after problem and I think something may have screwed up along the way.
I finally managed to get kitkat installed using flashtool and a generic C6903 .108 ftf.
Problem 1... I used 'Easy Root tool' from xda to root kitkat... but it seemed to hang at the cleaning up' stage - is this a problem?
Problem 2... every time I restart my phone - kitkat asks what language etc. Whats that all about?
PROBLEM 3. The guide Im following says to install busybox after rooting kitkat.
I've tried 2 different busybox installers and both of them fail when trying to install bb.
QUESTION: Are these 3 problems linked and will it prevent me from continuing with the guide I am trying to follow??? i.e. do I need busybox to install XZ Dual Recovery and therefore a pre-rooted zip?
Root Checker basic says kitkat is rooted, as does the first busybox installer.
I'm taking a short break from this nightmare, so in the meentime if any of you chaps could advise me on whether or not its ok to continue or if I have fecked up the whole process, that would be great.
Thanks in advance
problem 1 : re run the installer again, don't use administrator mode
problem2 : use any simcard on your phone
others, sorry i have no idea, you could download busybox from playstore ?
I would just start over and try a different root program. busybox is failing to install because the root didn't work.
Gamer4Life said:
problem 1 : re run the installer again, don't use administrator mode
problem2 : use any simcard on your phone
others, sorry i have no idea, you could download busybox from playstore ?
Click to expand...
Click to collapse
Problem1... thank you, I'll try again
Problem2... Thanks. I thought It could be the lack of a SIM card and then I thought no! that can't be it lol... as usual - I was wrong ha
others... yeah mate, tried 2 different installers from play store - no joy with either.
Thanks for your help
xasbo said:
I would just start over and try a different root program. busybox is failing to install because the root didn't work.
Click to expand...
Click to collapse
Cheers bud, I'll try 'easy root tool' once more without admin priv, if its the same story I'll start over and try a different root tool. Any suggestions on that?
Also: how come root checker says I'm all good and rooted but busybox wont install? even one of the busybox installers says "Your device is rooted"!?!?
Thanks for all the help mate
i think you don't have supersu installed, and busy box couldn't get root rights
so download supersu from playstore, open it and update binaries as normal, then reboot
and you would be able to install bb
thesweeney80 said:
Cheers bud, I'll try 'easy root tool' once more without admin priv, if its the same story I'll start over and try a different root tool. Any suggestions on that?
Also: how come root checker says I'm all good and rooted but busybox wont install? even one of the busybox installers says "Your device is rooted"!?!?
Thanks for all the help mate
Click to expand...
Click to collapse
Try the suggestion made by @Gamer4Life, just in case you somehow got root but it failed to install the APK needed to manage it. Might save you some work. That would explain why everything thinks you're rooted.
As for an alternative, if you still need it, I think I used kingroot successfully on 4.4.4.
Gamer4Life said:
i think you don't have supersu installed, and busy box couldn't get root rights
so download supersu from playstore, open it and update binaries as normal, then reboot
and you would be able to install bb
Click to expand...
Click to collapse
thanks for the tip mate but no joy see my reply to xasbo, cheers
xasbo said:
Try the suggestion made by @Gamer4Life, just in case you somehow got root but it failed to install the APK needed to manage it. Might save you some work. That would explain why everything thinks you're rooted.
As for an alternative, if you still need it, I think I used kingroot successfully on 4.4.4.
Click to expand...
Click to collapse
Thanks mate. I was hoping Gamer4life might be right as there was no Supersu installed.
I installed supersu from play store no problem... but when I try to update binaries it says' update failed. Please reboot and try again.'. tried reboot but same story.
I guess I'll try 'easy root tool' again and then will give kingroot a bash if needbe.
One last pre-emptive question...
If I root kitkat using kingroot... should I replace kinguser with supersu before proceeding with XZDR and a pre-rooted zip or will kinguser be sufficient to continue.
Many thanks to you and everyone else who has tried to help me with this clusterf*ck,.. I appreciate it
can you screenshot the error you got ?
i reread your op, you don't need busybox to install dual recovery, it installs like the easy root installer, very easy
just one click and you are ready to go
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Gamer4Life said:
can you screenshot the error you got ?
i reread your op, you don't need busybox to install dual recovery, it installs like the easy root installer, very easy
just one click and you are ready to go
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Click to expand...
Click to collapse
must have been a glitch in the matrix mate becuase its now working (Possibly thanks to your suggestion of installing Supersu?).
I reconnected to PC in order to give 'easy root tool' another crack at it.
As soon as I start install.bat It says checking if device is rooted AND I get a superuser request on my phone for adb.shell - Happy days!
I granted root access to adb shell and the root tool says Job Done. Root success etc.
So I disconnect and try to update su binaries and it worked first go!!!
*Touch wood* I think I'm now past the tricky part and it should be plain sailing from here on in. lol
THANKS for the help Gamer4Life, and everyone else who has chipped in.... hopefully my next post will be to report a fully rooted 5.1.1 :fingers-crossed:
Gamer4Life said:
also xzdualrecovery will root your device and install supersu by default if you have kitkat, so you can skip that.
edit (i don't think this will work because towelroot doesn't work on z1 4.4.4 108)
Click to expand...
Click to collapse
Correct, TowelRoot doesn't work for this version.
---------- Post added at 01:27 PM ---------- Previous post was at 01:26 PM ----------
thesweeney80 said:
THANKS for the help Gamer4Life, and everyone else who has chipped in.... hopefully my next post will be to report a fully rooted 5.1.1 :fingers-crossed:
Click to expand...
Click to collapse
:good: godspeed
@thesweeney80 you are welcome have fun
xasbo said:
:good: godspeed
Click to expand...
Click to collapse
Gamer4Life said:
@thesweeney80 you are welcome have fun
Click to expand...
Click to collapse
you fellas are the muts nuts.
All done, everything went smoothly once I got kitkat rooted properly.
MANY thanks for all your help.
Honestly I wouldnt even bother owning a smartphone if it wasnt for the peeps on XDA... F*cking awesome. THANKS :good: :highfive:
:good: awesome! don't forget to pay it forward sometime.

Categories

Resources