Related
Whats the best rom available right now for the N1? I haven't tested my N1 with anything in a while been running MIUI but I'm finding it to be sort of laggy now with apps installed.
Fastest? Hmm, pretty much any CM7 self-kang.
This one by samuaz is really fast: http://forum.xda-developers.com/showthread.php?t=1416894
Is that the most stable rom available for nexus one right now?
with multiple full wipes to include system both are stable for me
with ICS by samuaz you need to follow op page exactly
Temaseks latest CM7 Kang with scroll zip is BLAZING
I use now ICS by samuaz, it's fast and really stable. But it's an alpha version!
When you think it's important to have a stable rom, then
use CM7. CM7 roms are as stable as stock, but better ;-)
worth upgrading to ICS or JB?
hello. I realize this thread hasn't been active in a while, but I am thinking to bring back my Nexus One from the grave so I can have a backup phone for my daughter to play with in the car/plane. I wanted to ask if it is worth installing ICS or JB ROMs that are out there. I just have the stock ROM in there now and I always struggled with low memory and lag with some newer apps, that's why I've upgraded phones (I've have a Galaxy Nexus now).
I don't have intentions to put a SIM card in there, so I don't really care about phone call features.. only purely from a processing and lightweight standpoint.
Has anybody played enough with GB vs ICS and/or JB and weighed if it's worth upgrading? I'm assuming that it's worth it because so many developers still have Nexus One ROMs... that's why I would just go ahead and install it, but then I'm thinking again if it's just going to bog down the phone if I'm going to only use it for simple games.
Thanks in advance!!
Ken
Hello! I have installed the CM10.1 VJ Jelly Bean 4.2.2 v6.0 that is based on CyanogenMod and Evervolv, and works fine for me. I also have installed all the /data partition in the SD card with the A2SD script that is incorporated in the ROM... it generates some few lags, but I didn't have had any problem of lack of space again.
In my opinion, this is the ROM of JB that best preserves the native Android interface, and in my case is stable (until 7 days without to require a reboot!).
Other JB ROMs that users frequently use are PARANOIDANDROID and PixelDroid.
Thanks for the quick response! That is the ROM I was thinking of as well. However, just as a comparison, I'm thinking to flash a clean version of GB back onto the phone as well. Any recommendations on any GB ROMs as well? Thanks!
rafcano said:
Hello! I have installed the CM10.1 VJ Jelly Bean 4.2.2 v6.0 that is based on CyanogenMod and Evervolv, and works fine for me. I also have installed all the /data partition in the SD card with the A2SD script that is incorporated in the ROM... it generates some few lags, but I didn't have had any problem of lack of space again.
In my opinion, this is the ROM of JB that best preserves the native Android interface, and in my case is stable (until 7 days without to require a reboot!).
Other JB ROMs that users frequently use are PARANOIDANDROID and PixelDroid.
Click to expand...
Click to collapse
vanquish15 said:
Thanks for the quick response! That is the ROM I was thinking of as well. However, just as a comparison, I'm thinking to flash a clean version of GB back onto the phone as well. Any recommendations on any GB ROMs as well? Thanks!
Click to expand...
Click to collapse
Sorry, but I can't help on it. I didn't install any GB ROM further than the stock ROM. In my opinion, I think that a stable, complete and functional ROM might be CyanogenMod 7.2. Maybe other XDA members can help you better on it...
rafcano said:
Sorry, but I can't help on it. I didn't install any GB ROM further than the stock ROM. In my opinion, I think that a stable, complete and functional ROM might be CyanogenMod 7.2. Maybe other XDA members can help you better on it...
Click to expand...
Click to collapse
No problem. I'll probably end up trying both out. Thanks again for the response. By the way, what do you use your N1 for now or is that you main phone? I was playing around with it yesterday and I still like it a lot - I always liked the trackball.
plz tell me the best jb rom ri8 now?
vanquish15 said:
No problem. I'll probably end up trying both out. Thanks again for the response. By the way, what do you use your N1 for now or is that you main phone? I was playing around with it yesterday and I still like it a lot - I always liked the trackball.
Click to expand...
Click to collapse
This is my main phone. In several times I though changing to other new Nexus device, but the screen size of new devices is too big for me! I like a screen size from 3.7 to 4.0, that is good to read mails, a brief navigation in the Internet, and other minor issues. For other intensive uses, I have my tablet Nexus 10 or my laptop.
I've been running Liberty 2.0 on my D3 for quite a while now. Starting to get jealous of everyone who's one or even two builds up on me.
I looked into what ROMs were available for the D3 for ICS, specifically because some of the custom apps I use are not compatible with JB yet. I found HashCode's CM9 build and his AOKP build (which could be the same thing, and I just don't understand.
I also posted once before where someone recommended Gummy for the Droid 3, but I could never nail down which version was the most up-to-date and was working the best. I learned that they stopped working on the Gummy ROM over the summer, but if they had a working build, I would love to try it out.
All I am looking for is the most complete build of ICS on the Droid 3. I use this phone as my primary device, so I would like to be able to use the camera, internet, data, etc.
If anyone has any other suggestions, please feel free to recommend what you use/have used.
joefuf said:
I've been running Liberty 2.0 on my D3 for quite a while now. Starting to get jealous of everyone who's one or even two builds up on me.
I looked into what ROMs were available for the D3 for ICS, specifically because some of the custom apps I use are not compatible with JB yet. I found HashCode's CM9 build and his AOKP build (which could be the same thing, and I just don't understand.
I also posted once before where someone recommended Gummy for the Droid 3, but I could never nail down which version was the most up-to-date and was working the best. I learned that they stopped working on the Gummy ROM over the summer, but if they had a working build, I would love to try it out.
All I am looking for is the most complete build of ICS on the Droid 3. I use this phone as my primary device, so I would like to be able to use the camera, internet, data, etc.
If anyone has any other suggestions, please feel free to recommend what you use/have used.
Click to expand...
Click to collapse
There is no 100% working ICS rom as of now, but with Kexec they have a custom kernel booting and building from there. I would settle into a GB rom for stability/everyday use and have either an ICS or JB rom just to test. You can check the development forum for the current active CM9/CM10/AOKP by Hashcode, the latest CM10 (Jelly Bean) Kexec rom only seems to have a sleep issue and no camera, everything else seems fine so far. Safe Strap 3.05 lets you have up to 5 bootable systems without swapping nandroid backups; Stock + 4 custom rom slots.
http://blog.hash-of-codes.com/how-to-safestrap/ Here is Hash's website about safestrap and to download.
http://forum.xda-developers.com/showthread.php?t=1804665 Here is the thread about Hash's current work on Kexec and available roms. Read up some of the last ~20 pages for current rom and information on it, just make sure to learn the new safestrap before playing around.
As for other roms; The Gummy team split up as I recall, no more Gummy roms...
Personal main usage; I use Maverick ROM 4.0, good battery, good tweaks, looks nice.. version 4.5 has overclock, but a bug in it causes battery drain so stick with 4.0.
From what I read from other threads, it appears that the ICS and JB roms are quite stable enough as a daily driver. I have a few questions regarding these Roms. I'm still running the Apex rom which is an i9000 stock based rom on 2.3.6 for the past year or so. It has been working very well for me. I'm kinda inching to running a JB or ICS rom because of some apps wouldn't run on anything less than ICS or JB.
1. My main concern that stopped me from running ICS or JB is the EU bug. What are the chances of one who never had it before to get it?
2. I know Adobe stopped providing flash support for JB, so now because I'll be running a custom rom, will there be flash support on those roms?
3. The state of 4.2.1 appears to still be in beta for most roms, so I would assume 4.1.2 is more stable than the former, but I would like to know how does 4.1.2 compare with 4.0.4 in terms of stability?
4. I've ran CM7.1 before which was an AOSP rom, but I experienced really bad battery problems. I've tried it a few times, and nothing works to solve it, so I always end up going back to the APex Rom. Because the JB and ICS roms are AOSP-based, how would these roms compare with the stock based roms and CM7 in terms of battery life?
I really want to be sure I want to flash JB or ICS. I would like to breathe some new life into my 2.5 year old phone, but just want to make sure I know what I'm getting into first.
Thanks in advance.
likiud said:
From what I read from other threads, it appears that the ICS and JB roms are quite stable enough as a daily driver. I have a few questions regarding these Roms. I'm still running the Apex rom which is an i9000 stock based rom on 2.3.6 for the past year or so. It has been working very well for me. I'm kinda inching to running a JB or ICS rom because of some apps wouldn't run on anything less than ICS or JB.
1. My main concern that stopped me from running ICS or JB is the EU bug. What are the chances of one who never had it before to get it?
2. I know Adobe stopped providing flash support for JB, so now because I'll be running a custom rom, will there be flash support on those roms?
3. The state of 4.2.1 appears to still be in beta for most roms, so I would assume 4.1.2 is more stable than the former, but I would like to know how does 4.1.2 compare with 4.0.4 in terms of stability?
4. I've ran CM7.1 before which was an AOSP rom, but I experienced really bad battery problems. I've tried it a few times, and nothing works to solve it, so I always end up going back to the APex Rom. Because the JB and ICS roms are AOSP-based, how would these roms compare with the stock based roms and CM7 in terms of battery life?
I really want to be sure I want to flash JB or ICS. I would like to breathe some new life into my 2.5 year old phone, but just want to make sure I know what I'm getting into first.
Thanks in advance.
Click to expand...
Click to collapse
1. To my knowledge the EU bug is only present on ICS ROMs. I encountered it once and had read enough about it that I didn't hit the reset phone button. I went back into recovery and flashed back to jellybean with no permanent harm.
2. I haven't paid much attention to this so potentially yes and no.
3. 4.2.1 is actually pretty stable but is lacking some features that people already running custom JB ROMs have come to rely on. But yes for a fully functional and stable ROM I would suggest avoiding 4.2.1 for the time being.
4. In my opinion battery life is improved over gingerbread no matter what ROM you're running. Of course battery life is a subjective thing. I've seen screenshots where someone had their battery last 2 days on so and so rom. But that person likely didn't touch the phone the majority of those 2 days.
All in all I would suggest you go with jellybean 4.1.2 as they are very stable and honestly smoother and more responsive than ICS.
A couple things before you flash though. First make a backup of your efs folder. You'll thank me later if you end up needing it. Secondly going from where you are to where you want to end up is a major jump in software versions which includes a partition layout change specifically if you are going to Jellybean. So the first time you flash the ROM the flash will complete very quickly(less than 5 seconds). If you try to boot after that flash you'll get stuck in a boot loop. Don't worry though just reboot back into recovery which should have updated with the first flash. Then just flash the ROM again as well as the gapps and you'll be golden.
Sent from my SGH-I897 using xda app-developers app
likiud said:
From what I read from other threads, it appears that the ICS and JB roms are quite stable enough as a daily driver. I have a few questions regarding these Roms. I'm still running the Apex rom which is an i9000 stock based rom on 2.3.6 for the past year or so. It has been working very well for me. I'm kinda inching to running a JB or ICS rom because of some apps wouldn't run on anything less than ICS or JB.
1. My main concern that stopped me from running ICS or JB is the EU bug. What are the chances of one who never had it before to get it?
2. I know Adobe stopped providing flash support for JB, so now because I'll be running a custom rom, will there be flash support on those roms?
3. The state of 4.2.1 appears to still be in beta for most roms, so I would assume 4.1.2 is more stable than the former, but I would like to know how does 4.1.2 compare with 4.0.4 in terms of stability?
4. I've ran CM7.1 before which was an AOSP rom, but I experienced really bad battery problems. I've tried it a few times, and nothing works to solve it, so I always end up going back to the APex Rom. Because the JB and ICS roms are AOSP-based, how would these roms compare with the stock based roms and CM7 in terms of battery life?
I really want to be sure I want to flash JB or ICS. I would like to breathe some new life into my 2.5 year old phone, but just want to make sure I know what I'm getting into first.
Thanks in advance.
Click to expand...
Click to collapse
Yes, flash it still supported. Just not needed by adobe.
Battery problem can come from so many things and usually is user based. We use apps like BetterBatteryStats to narrow it down though.
As for 4.1.2 and 4.2.1. I would highly suggest 4.1.2 for now until 4.2.2 comes out.
agree with BWolf56,
I've running CM10.0 stable release, JB 4.1.2, and have found it to be more stable, smoother, and reliable than stock GB with Corn 7 kernel.
I was also concerned about EU bug.
I couldn't find any evidence than anyone had experienced the EU bug on JB.
Skip ICS and go for it!
Sent from my SGH-I897
I think I'm sold to JB 4.1.2! Thank you for all the replies.
Sent from my SGH-I897 using xda app-developers app
Are there any noticeable improvements (performance-wise) in the custom KitKat ROMs and the stock 4.1.2? I mean, are there any changes that you can feel and see, or is it just a new android version with fancy new features?
Also I'd wait until a stable version of OmniROM or CM gets built until I try to flash my device.
RexGrammer said:
Are there any noticeable improvements (performance-wise) in the custom KitKat ROMs and the stock 4.1.2? I mean, are there any changes that you can feel and see, or is it just a new android version with fancy new features?
Also I'd wait until a stable version of OmniROM or CM gets built until I try to flash my device.
Click to expand...
Click to collapse
I have flashed CM nightlies, PA nightlies, 4.3 PAC and Omni ROM.. Each Rom has its own unique features and performance difference!..
But personally i would say, those has its own + and - things..
The last ROM i flashed 4.4.2 Dirt Unicorns Rom ( http://forum.xda-developers.com/showthread.php?t=2633846 ) seemed Great to me.. Overall Nice features cheery picked from all ROMS but again its individual's preference in the end of the day and Every ROM is unique in its own way!
NOTE:- S-Note, S planner and other samsung apps will work only if you are flashing a Touchwiz based Rom.. Those apps wont work in CM, PA and AOKP Roms cuz they need TW framework to work with!
If you are thinking of flashing of TW based Roms, i would recommend 2 Roms to take a look at..
X-Rom ( http://forum.xda-developers.com/showthread.php?t=2320871 ) This is the Rom, i am currently using.. It will give your phone a tablet UI, thus taking advantage of your Note's large real estate screen! .. Multi window, floating window and buttery smooth and lots of features!
You can also check out the Note 8 Apps ported to our galaxy note N7000, if you are interested.. ( http://forum.xda-developers.com/showthread.php?t=2217662 )
Arya Mod ( http://forum.xda-developers.com/showthread.php?p=52357155 ) This is also a great Rom and cool icons and themes!
I can't say I've been using any of the TouchWiz features, to be honest.
Just a few things I don't like on the stock ROM: The gallery takes a long time to open, opening the contacts takes a bit, and the animations sometimes glitch out (they just get skipped). And I'm locked to my current provider, but as my guarantee is at an end, I'm looking for a custom ROM to get out of the damn simlock, and maybe fix some other things as well.
So if you could just point out a few major differences (both performance wise, and feature wise) between CM, Omni and Dirt Unicorns, that'd be awesome. Of course I'd still wait for a stable version to come out.
I'm not really sure if I want a TW based ROM, not that I was using any of it's features. They always were a tad bit laggy on my phone. Mainly I'm looking for a ROM that'll run the smoothest, and that's the main thing, all eye-candy and fancy stuff is just icing on the cake. But I'll check out the ROMs you linked (the links seem to be wrong, tho). Thanks a lot!
I'll post another question in the same thread, so I don't have to open another one and clutter the board.
Are the OmniROM and CM nightlies stable? Also, is the only way to update CM to download and flash a new version of the OS, since there's that opendelta thing on Omni, where you can just download the update, just like real OTA?
RexGrammer said:
I'll post another question in the same thread, so I don't have to open another one and clutter the board.
Are the OmniROM and CM nightlies stable? Also, is the only way to update CM to download and flash a new version of the OS, since there's that opendelta thing on Omni, where you can just download the update, just like real OTA?
Click to expand...
Click to collapse
They aren't stable but can be used as daily driver depending upon your usage. For Omnirom there is open delta, you can check for updates in settings>About Phone and it would only download the update not the whole rom.
RexGrammer said:
Are there any noticeable improvements (performance-wise) in the custom KitKat ROMs and the stock 4.1.2? I mean, are there any changes that you can feel and see, or is it just a new android version with fancy new features?
Also I'd wait until a stable version of OmniROM or CM gets built until I try to flash my device.
Click to expand...
Click to collapse
I doubt 4.4 will ever be 100% stable, but god bless the cooks that keep coming up with updates, since for obvious reasons,
Samsung won't port past 4.1.2 officially.
Personally, for my usage, I've skipped everything past 4.1.2, as I can go weeks between reboots, lock ups, and with a custom
launcher (go launcher), my device is smooth and rock stable. It has a stock (DBT german international device) rom, rooted,
custom kernal just in case I forgot and didn't want to erase and endure the brick bug. Uninstalled the DBT bloat.
2+ years and still going strong.
p51d007 said:
I doubt 4.4 will ever be 100% stable, but god bless the cooks that keep coming up with updates, since for obvious reasons,
Samsung won't port past 4.1.2 officially.
Personally, for my usage, I've skipped everything past 4.1.2, as I can go weeks between reboots, lock ups, and with a custom
launcher (go launcher), my device is smooth and rock stable. It has a stock (DBT german international device) rom, rooted,
custom kernal just in case I forgot and didn't want to erase and endure the brick bug. Uninstalled the DBT bloat.
2+ years and still going strong.
Click to expand...
Click to collapse
is it possible to create note2 android 4.3 rom for note1
CustomRomAddicts said:
I have flashed CM nightlies, PA nightlies, 4.3 PAC and Omni ROM.. Each Rom has its own unique features and performance difference!..
But personally i would say, those has its own + and - things..
The last ROM i flashed 4.4.2 Dirt Unicorns Rom ( http://forum.xda-developers.com/showthread.php?t=2633846 ) seemed Great to me.. Overall Nice features cheery picked from all ROMS but again its individual's preference in the end of the day and Every ROM is unique in its own way!
NOTE:- S-Note, S planner and other samsung apps will work only if you are flashing a Touchwiz based Rom.. Those apps wont work in CM, PA and AOKP Roms cuz they need TW framework to work with!
If you are thinking of flashing of TW based Roms, i would recommend 2 Roms to take a look at..
X-Rom ( http://forum.xda-developers.com/show...0871&nocache=1 ) This is the Rom, i am currently using.. It will give your phone a tablet UI, thus taking advantage of your Note's large real estate screen! .. Multi window, floating window and buttery smooth and lots of features!
You can also check out the Note 8 Apps ported to our galaxy note N7000, if you are interested.. ( http://forum.xda-developers.com/show....php?t=2217662 )
Arya Mod ( http://forum.xda-developers.com/show....php?t=2575767 ) This is also a great Rom and cool icons and themes!
Click to expand...
Click to collapse
All your links are wrong.
daedric said:
All your links are wrong.
Click to expand...
Click to collapse
i dont know what you are taking about
CustomRomAddicts said:
i dont know what you are taking about
Click to expand...
Click to collapse
LOL
CustomRomAddicts said:
i dont know what you are taking about
Click to expand...
Click to collapse
The only working link you posted is the first one. The other three don't work. Try it for yourself
He already fixed it... but my quote remains to explain what happened
Hi
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
reply cm
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S[/QUOTE]
dajmaa said:
Believe me I tried everything on nook.my initial thoughts were to run on SD card.but you have no official stable ROM for SD card .and the one available from bookbane was quite laggy .I tried both cm 11 and cm 10.2.then I installed on emmc again cm 11,cm 10.1 ,xperia ROM.but trust me the best experience I had so far was from cm10.2 on emmc .works beutiffully without any lag.
Just received a Nook HD+ but after quickly browsing and playing for a while, I was not pleased with the stock rom, scrolls were not as smooth as I had seen on my nexus 4 for nexus 7 (maybe I am spoilt), I could notice some jitters and hope a custom ROM could fix this.
When I see in the Android development forum for this device, as usual the very many listing of the ROMs makes it difficult to identify which is the latest and the stable one (I suggest in future we should group the threads as - stable and non-stable which will help Noobs like me to jump into the act immediately).
Can somebody please advise me this bit of information as to which is the most latest custom rom that is stable, I am guessing it could the 10.1 build here [NookHD+] CM10.1 native emmc install Now part of CM Nightlies . Also to a step by step resource starting from rooting to the final flashing of the custom rom.
Also, is it possible to use 'Cyonogenmod installer' instead directly from their website!?
thanks
S
Click to expand...
Click to collapse
[/QUOTE]
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S
Could you please point me to the source please with instructions to the best experience ROM 10.2!? will this autoupdate to any other new updates from Cyanogenmod?
thanks
S[/QUOTE]Go to the dummies guide for installing CM10.1/CM10.2 linked in my signature.
Sent from my SCH-i705 using Tapatalk
CM11
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
CM 10.2.1. vs. CM 11
After reading some of the posts here, I decided to "downgrade" from CM 11 0327 to the last stable CM 10, 10.2.1. (Per dajmaa's suggestion.)
I'd never tried CM 10 before. When I got my HD+ a few weeks ago, I went from the Nook stock ROM direct to a CM11 SD install (0308) and then ended up at CD 11 0327 on emmc the other day.
While CM 11 was usable for me (except for one annoying problem, where I couldn't download mp3's), I see that CM 10 is much more finished. For example, it has zRam implemented. (But maybe KitKat doesn't need that, with it's ostensibly better memory management?) Trebuchet launcher works like it's supposed to in CM 10.2.1, although I liked the ability to enlarge the icons in CM 11. And the font in the status bar seemed bigger to my old eyes in CM 11 than CM 10.
Lagwise, they both seem the same. No lag, although I noticed that CM 10 gets "stuck" every now and then when I switch back and forth quickly between apps. And it keeps wanting to put "Extended Desktop" in the Power menu.
I haven't had it running long enough with my aviation moving maps to see if I get any random reboots like I did with CM 11.
As JimJ2Mz said, 0327 runs well. (Except that I couldn't download podcasts.)
But I'll plan to stay put now until there's some major announcement about CM 11, like a RC or something.
JimJ2Mz said:
Best choice for HD+ is CM11 EMMC from verygreen.
It's officially supported by Cyanogemod and gets nightly updates.
The ROM is smooth and efficient.
There may be tiny little bugs for the ROM, but they won't stop you from using your device as a daily driver.
3/27 is very stable btw.
Click to expand...
Click to collapse
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
When you updated to CM10.2, did you also update to 20120813 gapps? That could be the reason for your gapps problems if you didn't.
And an HD+ is not 'older hardware'.
I recommend CM10.1.3 as the most stable.
Sent from my BN NookHD+ using XDA Premium HD app
sany said:
Thanks Jim, I installed 10.2.x after trying out 10.1.3 for some time. I notice, GAPPS crashing randomly once in a while although not that too bad. Sometimes hangs for a while before it gets normal. So I guess there are still some bugs around. So was wondering 10.1.3 must be the one for me unless something stable comes up.
Now I see your post, and wondering why not I try it if there is going to be future updates. Do you feel it is smoother than the 10.1.x and 10.2.x as we all know KitKat is designed to run better on older hardware? If so I will proceed with CM11 and live minor bugs if that is not going to stand in the way of my daily usage like you mentioned.
Click to expand...
Click to collapse
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
JimJ2Mz said:
In my own experience, yes, CM11 feels much more fluid than the older versions.
4.4 RAM usage is optimized for older hardware, which actually benefits ALL devices, but that doesn't mean that the Nook HD/HD+ is old. It's modern and is still very powerful, just as leapinlar said. Well, not powerful, but not weak. Haha.
And as leapinlar also recommended, CM10.1.3 is indeed stable. Anyway. It's up to you. I've had my experiences with the ROMs and they can differ from others, so it's all up to you whether you want to try CM11 or stick to any other ROM.
Click to expand...
Click to collapse
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
I have literally tried every single ROM out there and here are my recommendations:
1. Succulent's CM 11 (http://goo.im/devs/succulent/ovation/cyanogenmod/internal)
2. Official CM 10.2 Stable (I have been using it with drmarble's Kernel, which you can get here: https://app.box.com/s/ry03xsmhlxq2jomnwlaj)
Both ROMs are bug-free and run flawlessly. I get around 6 hours of screen-on time on both (which is an amazing battery life).
OH GEEZ
sany said:
I tried CM11 but it was throwing lots of google app erros on load, I was actually using the same GAPPS file that was on the 10.2.1, is there a used diferent GAPP file for CM11? maybe that caused the error. And also I struggled to go back to the CWM recovery for CM10.1 and 10.2 as it was just stuck at the recovery used for CM11 even after flashing the ver.3 recovery zip several times.
Click to expand...
Click to collapse
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Thanks Jim
JimJ2Mz said:
DUDE YOU HAVE TO USE GAPPS DEDICATED FOR CM11 (4.4)!
That's a given. You're having errors due to the fact that you're using 4.2 gapps on 4.4!
Follow this guide and FIX EVERYTHING. I followed it myself it everything works perfectly.
Please do ask if you need help on anything. I may be a noob, but I do know some stuff.
http://forum.xda-developers.com/showthread.php?t=2602796
Click to expand...
Click to collapse
Thanks Jim, I will do this. Why do you think I was unable to go back to CWN recovery for 10.1/10.2 - everytime after flashing the old recovery and go into the recovery mode, I still see the ver.6 (of CM11) in action.
S