I want to buy a screen protector for my G2, but I don't know which one is good. Can you help me?
And I found this screen protector ebay.com/itm/190966978221?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Do you have any idea about it?
Thank you! Sorry for my english
screen protectors
http://www.amazon.com/gp/aw/d/B00EL94VPQ/ref=mp_s_a_1_3?qid=1388984099&sr=8-3&pi=SY200_QL40
---------- Post added 6th January 2014 at 12:13 AM ---------- Previous post was 5th January 2014 at 11:58 PM ----------
http://www.amazon.com/gp/aw/d/B00FGEBB76/ref=mp_s_a_1_4?qid=1388984099&sr=8-4&pi=AC_SX110_SY165_QL70
Anyone know any good quality matte screen protector? The glossy ones are horrible...
Sent from my JEE TWO
SKyRocKeting727 said:
Anyone know any good quality matte screen protector? The glossy ones are horrible...
Sent from my JEE TWO
Click to expand...
Click to collapse
I used XPEL "Ultimate" film which isn't too glossy, but they do make a "Stealth" film which is matte. Find a local dealer to you and see if they will give you a small chunk or maybe even put it on your phone for you.
You could try illumshield screen protectors comes in pack of 3. Has individual cutouts for camera, sensors and speaker for $4......amazon
Question, are there any perfect cut out screen protector for the G2's curved glass? I find most that are made too big and the edges doesn't stick to the glass due to the curved areas of the G2...
Sent from my JEE TWO
SKyRocKeting727 said:
Question, are there any perfect cut out screen protector for the G2's curved glass? I find most that are made too big and the edges doesn't stick to the glass due to the curved areas of the G2...
Sent from my JEE TWO
Click to expand...
Click to collapse
The G2 doesn't have curved glass? Or well at least mine doesn't.
I'm using an Xtreme Guard protector and it's working fine for me.
You can try the Tempered glasses
I use the Zaggs, just enough texture to be easy on the finger, crystal clear, and they're applied wet, so it's fairly easy to get them on right and squeegie out any bubbles or dust particles, which is very hard with the dry-apply ones.
Of course, if you're nervous about wetting down your screen, you might not want to try it.
THe Zagg originals are not really "glossy"...those are the ones that are hard to use, they're TOO smooth, causing too much resistance to your finger sliding. Zaggs are "clear" rather than glossy: there's a slight texture to them, enough to ditch the gloss, but not enough to affect the sharpness or color saturation.
They also look ugly as hell until they dry, but give it 24 hours before panicking. It's worth it.
This one is awesome: http://www.amazon.com/iloome-Screen...0F4AT5Q6/ref=sr_1_1?ie=UTF8&qid=1389534473&sr
you should try it !
German screen protectors are the best
Enviado desde mi LG-D802 mediante Tapatalk
I use Panzer Glass for mine and it does its job
Sent from my LG-D802 using xda app-developers app
vPro97 said:
I use Panzer Glass for mine and it does its job
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
I think it is similiar to iloome: http://www.amazon.com/iloome-Screen...0F4AT5Q6/ref=sr_1_1?ie=UTF8&qid=1389534473&sr or Panzer Glas is better ?
Do you have a link ?
Thanks
It's quite similar although it isn't flexible. It's a bit harder too (9h). I'll try to find a link.
Sent from my LG-D802 using xda app-developers app
9H...it is incredible ! iloome is 8H but it is flexible and you say that Panzer Glass is not.
However if you find a link I thank you because I have iloome but I curious now and I want to tray Panzer Glass
Where do you live?
Sent from my LG-D802 using xda app-developers app
What the panzer thickness ? Iloome is 0,12mm
Envoyé de mon Sony Tablet S en utilisant Tapatalk
Totriet said:
What the panzer thickness ? Iloome is 0,12mm
Envoyé de mon Sony Tablet S en utilisant Tapatalk
Click to expand...
Click to collapse
It's a fair bit thicker, but I find it better due to the added protection it offers.
My review of the Panzer Glass can be found HERE: http://forum.xda-developers.com/showthread.php?t=2603707
In Denmark, Panzer Glass can be purchased from smartfast.dk
In Germany (and in general EU) it can be purchased HERE: http://www.ebay.de/itm/Original-Pan...y_PDA_Displayschutzfolien&hash=item19e6fa0447
Humm... Ok Thank you, and for the feeling of touch, as this is the original screen ?
jose_k said:
9H...it is incredible ! iloome is 8H but it is flexible and you say that Panzer Glass is not.
However if you find a link I thank you because I have iloome but I curious now and I want to tray Panzer Glass
Click to expand...
Click to collapse
And you jose_k you are not completely satisfy by yours ? I see you want change.
Envoyé de mon Sony Tablet S en utilisant Tapatalk
Toriet I am satisfy with my iloome screen protector however since vPro97 wrote about Panzer Glass I say to myself that is time to try something new.
Then I read the review about Panzer Glass and I thought that this one could be better than iloome.
Anyway I will decide which is better for me after I will try also Panzer Glass.
Related
Does anyone else's screen protector have dust collecting under the spot where the screen curves down into the bezel? its above the speaker grille and also below the capacatives.
I ordered a zagg and I'm hoping that it doesn't also do the same thing.
Has anyone come across a screen protector that doesn't suck/ do this?
Sent from my Nexus S using XDA App
Well im on my third zagg invisible shield, the previous two where not a perfect fit. Thats why they where also collecting dust at the bottom part where the keys are. Te third one ive ordered of their site and its much better fit for my nexus. There is no dust under it after more than two months of use.
Sent from my Nexus S using xda premium
JerryPi said:
Well im on my third zagg invisible shield, the previous two where not a perfect fit. Thats why they where also collecting dust at the bottom part where the keys are. Te third one ive ordered of their site and its much better fit for my nexus. There is no dust under it after more than two months of use.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Good, I just ordered one from Zagg and hopefully it fits like yours does.
I have an Xtreme Guard (here) and I don't have this problem. Fits perfectly.
My Nexus S came with a Zagg already installed, and yeah, I kinda hate it. I'm too lazy to order another one and put it on, so I'll deal. I was just wondering if anyone's screen has an orange tint to it? I just got the phone (3 days), and when I put it next to my Captivate, the Captivate's screen is much more vivid and has no orange tint to it. Is this because of Zagg? It fits very well, by the way.
Well i have slcd i9023 version, and its colors are still like before. I agree that the texture is a bit getting used to but when you do it doesnt really bother you. And on the plus side the annoying fingerprints are greatly reduced.
Sent from my Nexus S using xda premium
I have SGP steinheil ultra oleophobic and fits perfect. No non-sticky parts, neither dust under the protector.
Previously i had a case mate protector and it caught all the dust of the surroundings down the protector in the corners
JerryPi said:
Well i have slcd i9023 version, and its colors are still like before. I agree that the texture is a bit getting used to but when you do it doesnt really bother you. And on the plus side the annoying fingerprints are greatly reduced.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
yeah, the texture doesn't bother me, as long as there's no air bubbles, which won't be the case because I'm hoping that it comes with the solution and squeegee instead of the static cling method
alvaro214 said:
I have SGP steinheil ultra oleophobic and fits perfect. No non-sticky parts, neither dust under the protector.
Previously i had a case mate protector and it caught all the dust of the surroundings down the protector in the corners
Click to expand...
Click to collapse
Yeah I had a cheap chinese piece of crap before and that annoyed me to no end... made my phone look dirty and old
polobunny said:
I have an Xtreme Guard (here) and I don't have this problem. Fits perfectly.
Click to expand...
Click to collapse
I'll have a look at this is the invisible shield goes horribly wrong! thanks!
I've seen a lot of talk about cases but not much on screen protectors (aside from the tempered glass ones). On my OG Droid I used a Zagg Invisible Shield that worked well but had a bad orange peel look to it. My GF's iPhone has a "Power Support" screen protector on it which is crystal clear and works well.
What is everybody using? Are the tempered glass protectors where it's at now?
I always have used sgp spigen screen protectors, think they are the best ones.
Sent from my LG-D801 using XDA Premium 4 mobile app
I know it's kind of pricey, but Zagg InvisibleShield Symphony Dry is the best in my opinion! Covers the front and back it's honestly my fav.
The Best Period
I'm currently using the iloome flex glass protectors. It looks great and it is real glass and it's only $16.99, but it is worth it. Looks nice and feels good. Plus its thinner then the Spigen nano glass protector.
xdax036 said:
I'm currently using the iloome flex glass protectors. It looks great and it is real glass and it's only $16.99, but it is worth it. Looks nice and feels good. Plus its thinner then the Spigen nano glass protector.
Click to expand...
Click to collapse
aren't the edges coming off ? iloome stopped sending it out for now
I'm not having any problems with the edges don't know how aggressive you have to be for the edge of the protector to peel
Sent from my LG-D801 using XDA Premium 4 mobile app
Never had an issue with Steinheil/Spigen
Privacy Screen Protector for my G2
Well I have this Privacy Screen Protector I purchased it from Fommy , and its working really very fine..no hard issues till now..so If someone looking for a privacy screen protector..can give a try to this one....its nice one to go for.....
Has anyone ever rocked their phone without a screen protector? if so, did you screen get scratched up? Reason I ask is my Diztronic case for my Verizon G2 is great but it pushed up my Verizon screen protector (dry one from the store, which was working great). Am I going to ruin my screen without a screen protector? Does anyone have a Diztronic case and a screen protector that works well with it?
I switched from my Ballistic case to the Tudia Melody, which I love, because the former was causing my Zagg Invisible Shield to pull up. But all my previous phones have been completely naked and never had any problems with scratches.
VZW LG G2
Does anyone have any issues with spigen and the proximity sensor like in this review? http://www.amazon.com/gp/aw/d/B00E486GMU/ref=mp_s_a_1_1?qid=1382404949&sr=8-1&pi=AC_SX110_SY165_QL70
Sent from my VS980 4G using XDA Premium 4 mobile app
cc1995 said:
Has anyone ever rocked their phone without a screen protector?
Click to expand...
Click to collapse
I've always gone back and forth using them or going naked about 50% of the time. Never scratched a screen till this one... one week into use there was a tiny one dead center. I think it was actually sorta caused by the flip case. Either the metal ring on it out something got sick between the flap and screen.
Sent from my VS980 4G using XDA Premium 4 mobile app
I saw some german ones that had holes for all the sensors, anyone has one of these?
I was thinking of invisible defender but not sure how the cutout is.
Sent from my LG-D802
cc1995 said:
Has anyone ever rocked their phone without a screen protector? if so, did you screen get scratched up? Reason I ask is my Diztronic case for my Verizon G2 is great but it pushed up my Verizon screen protector (dry one from the store, which was working great). Am I going to ruin my screen without a screen protector? Does anyone have a Diztronic case and a screen protector that works well with it?
Click to expand...
Click to collapse
I ran my DNA completely naked. After a year it ended up having a few very fine scratches on the screen. Nothing horrible, but still there. I really like the feel of the bare glass, but may go back to a screen protector for my G2. I'm just not very good at installing them - maybe a glass one would be better... I don't know.
rfarrah said:
I ran my DNA completely naked. After a year it ended up having a few very fine scratches on the screen. Nothing horrible, but still there. I really like the feel of the bare glass, but may go back to a screen protector for my G2. I'm just not very good at installing them - maybe a glass one would be better... I don't know.
Click to expand...
Click to collapse
http://youtu.be/_oJX99p3kEc
this seems foolproof for screen protector application and should be stickied ha hah
best in dust free no wind environment
Sent from my LG-D802
xdax036 said:
I'm currently using the iloome flex glass protectors. It looks great and it is real glass and it's only $16.99, but it is worth it. Looks nice and feels good. Plus its thinner then the Spigen nano glass protector.
Click to expand...
Click to collapse
How much does it change the feel of the device? I love the idea of a non-plasticy protector.
just bought the Obliq pure oleophobic.
I'll post my thoughts on it as soon as it comes in
This one http://forum.xda-developers.com/showthread.php?t=2496233
Sent from my LG-D801 using xda app-developers app
bigox said:
This one http://forum.xda-developers.com/showthread.php?t=2496233
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
Looking closely at the edges of the screen protector on the phone, you will notice that the screen has about a 0.5mm radius all the way round it that is not sticking to the phone glass as a result of the glass curvature around all the phone screens edges.
I am having this same issue with my iloome flexible glass protector on my LG G2 as well sadly.
Without an external case that overlaps this edge I CANNOT recommend this glass screen protector as you run the fair risk of slicing yourself (i had to buy a gel case with overlap to mitigate this very real issue) or worse yet having a piece of glass screen protector break off in your skin because the glass screen protector is so thin and the edge is exposed around all the edges of the screen protector...
More details here: http://forum.xda-developers.com/showthread.php?p=46601941
bigox said:
This one http://forum.xda-developers.com/showthread.php?t=2496233
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
There is plenty of room around the bezel area for a case. This screen protector fits perfect.
Sent from my LG-D801 using xda app-developers app
I ordered "[3-PACK]-Mr Shield For HTC Bolt / HTC 10 EVO [Tempered Glass] Screen Protector" from Amazon and found it's too small for the screen. Has anyone found a tempered glass screen protector that fits the Bolt well?
Following
Sent from my 2PYB2 using Tapatalk
So I ordered some that were a bit too small. I chatted with HTC and inquired about it and they make them small because it will not cover the whole screen because if curved edges and could not recommend one that was specifically designed for this I am keeping my eye out though
Sent from my 2PYB2 using Tapatalk
jayshocka said:
Following
Sent from my 2PYB2 using Tapatalk
Click to expand...
Click to collapse
I have Poetic case (AMZ) and this tgsp (EBay). Glass doesn't cover the edges but case does despite being very slim. Nothing beats the grip of this Poetic, highly recommended!
I returned the screen protectors from my original post and ordered http://a.co/6XhuOvf. These fit much better, not edge-to-edge but I don't expect that. They cover as much as any tpsp I've used on Samsung, Motorola and Apple phones.
ehwilli said:
I returned the screen protectors from my original post and ordered http://a.co/6XhuOvf. These fit much better, not edge-to-edge but I don't expect that. They cover as much as any tpsp I've used on Samsung, Motorola and Apple phones.
Click to expand...
Click to collapse
Those are the ones I got
Sent from my 2PYB2 using Tapatalk
Although they peel off easy and they keep sliding up
Sent from my 2PYB2 using Tapatalk
Just got these. Good screen coverage very happy so far
[2-PACK]-Mr Shield For HTC Bolt [Full*Cover]*[Black] [Tempered Glass] Screen Protector with Lifetime Replacement Warranty https://www.amazon.com/dp/B06XW7NWTT/ref=cm_sw_r_cp_apap_1VRaG978kIlKg
Sent from my 2PYB2 using Tapatalk
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
juscallmemickey said:
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
Click to expand...
Click to collapse
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
juscallmemickey said:
I've gotta say, after trying 3-4 other silicon/PU cases, the one from Spigen has got to be the best.
I like that there is a lip around the screen so even with a tempered glass screen protector, the phone won't rest on the screen.
Click to expand...
Click to collapse
Got to agree, good quality from Spigen as usual. Only £10 from Amazon and looks better than all the no brand cases.
Sent from my BLA-L09 using Tapatalk
IRACONDIA said:
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
Click to expand...
Click to collapse
Not bulky at all. Maybe a few mm more than the included clear case.
The Spigen is the one you want. Trust me.
IRACONDIA said:
is it bulky?
I had a spigen case for my previous phone (Nexus 6) with a beautiful design, but I don't like the mate 10 pro spigen case design...
Click to expand...
Click to collapse
I kinda questioned the same about the odd rectangle part around the camera. Turns out that part releases heat when it's warm while gaming etc. It's like a heat sink fin since the motherboard is around the camera. It's a bit thick but that's the point. To protect the camera and the glass back and front. It's a dust trap though so need to clean it at times especially around the camera.
So I've have my mate 10 pro for a few days, and after looking at all the cases on eBay,Amazon,ect I've settled for this spigen case, it's the most I've pumped out for a case (£13.96 delivered UK) but the all glass body has me worried
Are you guys happy with the case now it's been out a month or so?
mad.jack10 said:
So I've have my mate 10 pro for a few days, and after looking at all the cases on eBay,Amazon,ect I've settled for this spigen case, it's the most I've pumped out for a case (£13.96 delivered UK) but the all glass body has me worried
Are you guys happy with the case now it's been out a month or so?
Click to expand...
Click to collapse
Yep, very happy. Dropped the phone a couple of times and no damage done. Looks smart. No issues at all.
Sent from my BLA-L09 using Tapatalk
Mario_Wiznycia said:
Yep, very happy. Dropped the phone a couple of times and no damage done. Looks smart. No issues at all.
Click to expand...
Click to collapse
Thanks, do you use a screen protector as well?
mad.jack10 said:
Thanks, do you use a screen protector as well?
Click to expand...
Click to collapse
Yes, currently using a tempered glass screen protector from Basstopuk purchased on Amazon.
Fit isn't great to be honest, so looking about for something better.
Sent from my BLA-L09 using Tapatalk
Mario_Wiznycia said:
Yes, currently using a tempered glass screen protector from Basstopuk purchased on Amazon.
Fit isn't great to be honest, so looking about for something better.
Click to expand...
Click to collapse
Thanks again.
I've just ordered this cheap on for now
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/253285577143
But I kinda like the look of these with the black strip
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/302558296765
My spigen case arrived today, Like others have said this case is worth the money,
Its not as bulky as I expected and it feels nice in hand.
Also my little finger fits nicely in the groove where the charging port is.
mad.jack10 said:
My spigen case arrived today, Like others have said this case is worth the money,
Its not as bulky as I expected and it feels nice in hand.
Also my little finger fits nicely in the groove where the charging port is.
Click to expand...
Click to collapse
Can you share pics and links please ?
Sent from my BLA-L29 using XDA Free mobile app
---------- Post added at 18:25 ---------- Previous post was at 18:23 ----------
mad.jack10 said:
Thanks again.
I've just ordered this cheap on for now
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/253285577143
But I kinda like the look of these with the black strip
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/302558296765
Click to expand...
Click to collapse
I've got 2.5d screen glass... bad idea not cover full, small edge all around stay not stick on screen then bad display
Avoid them very bad experience on 3 models.
Full coverage : never tried on mark 10pro. But thinking about to buy on.
Sent from my BLA-L29 using XDA Free mobile app
The spigen case is available on Amazon for about £10 in the UK.
https://www.amazon.co.uk/Spigen-Res...85307&sr=8-1&keywords=Spigen+mate+10+pro+case
Sent from my SM-T810 using Tapatalk
stephane.papin said:
Can you share pics and links please ?
Sent from my BLA-L29 using XDA Free mobile app
---------- Post added at 18:25 ---------- Previous post was at 18:23 ----------
I've got 2.5d screen glass... bad idea not cover full, small edge all around stay not stick on screen then bad display
Avoid them very bad experience on 3 models.
Full coverage : never tried on mark 10pro. But thinking about to buy on.
Click to expand...
Click to collapse
Yeah the 2.5d screen protector is garbage, I wish I hadn't removed the one that Huawei fitted because the glass one is too narrow for the screen its still peeling around the edges,
Here's the link for the case ,is a UK based eBay seller
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/112704278273
Fantastic case, there is only one thing I don't like.
I can't see my beautiful blue back of the phone and in the front there is nearly nothing but display. Is there a chance of getting a transparent spigen case?
I just pre-ordered this phone and bought this case. https://www.amazon.co.uk/gp/product/B085LR78D9/ref=ox_sc_act_title_3?smid=A1VXTSRX565TLZ&psc=1.
Is there any good tempered glass out there?
Is it also worth getting a screen protector for the camera as well. I saw this on ebay? https://www.ebay.co.uk/itm/Screen-P...brand=upscreen&_trksid=p2047675.c101195.m1851
I'm gonna wait for the tingle fusion x. Been using them for years. They also have lanyard holes
Sent from my SM-T865 using Tapatalk
dvdman2k said:
tingle fusion x.
Click to expand...
Click to collapse
I think you mean Ringke Fusion X
Do you know if they will make it?
I've ordered this glass screen protector:
https://www.ebay.co.uk/itm/143582052964
And this case:
https://www.mobilefun.co.uk/olixar-exoshield-sony-xperia-1-ii-case-black-80635
The case has arrived and it has a nice solid feel to it, with the cushioned corners. The clear back looks nice too. It has a nice slim feel and I can already see with the nice width, one handed use will be great.
Can't wait for the phone to arrive!
tonn333 said:
I think you mean Ringke Fusion X
Do you know if they will make it?
Click to expand...
Click to collapse
Yep sorry about that.
Sent from my LYA-L09 using Tapatalk
dvdman2k said:
I'm gonna wait for the tingle fusion x. Been using them for years. They also have lanyard holes
Sent from my SM-T865 using Tapatalk
Click to expand...
Click to collapse
dvdman2k said:
Yep sorry about that.
Sent from my LYA-L09 using Tapatalk
Click to expand...
Click to collapse
So I contacted Ringke and they don't have any plans to make a case for Xperia 1 II
Thanks for checking. Gonna start looking for another. I'm use to having a lanyard on my phone. I don't think mark 2 has lanyard holes.
Sent from my LYA-L09 using Tapatalk
Any good recommendations?
I installed AOKUMA Super Glass from Amazon and it's pretty bad. Makes the screen more grayish and reflective than it should be. Receiving another brand today. (Also some unknown brand - I have yet to find a reputable brand that offers Xperia 1 ii protectors.)
xnpu said:
I installed AOKUMA Super Glass from Amazon and it's pretty bad. Makes the screen more grayish and reflective than it should be. Receiving another brand today. (Also some unknown brand - I have yet to find a reputable brand that offers Xperia 1 ii protectors.)
Click to expand...
Click to collapse
Any news? Received my phone yesterday.
tonn333 said:
Any news? Received my phone yesterday.
Click to expand...
Click to collapse
Now using one from MSOVA. The picture quality is miles better. But it does have the problem that it comes up at the edges a bit. Depending on the cover you use this may or may not be an issue to you.
In any case it's better than the one I had previously.
I'm waiting for the Spigen glass here with the Spigen rugged armor here, i hope they are good
Gigio755 said:
I'm waiting for the Spigen glass here with the Spigen rugged armor here, i hope they are good
Click to expand...
Click to collapse
I have the case and it's really good. A nice tight solid feel to it, grippy and feels very nice. Just ordered that screen protector too!
Spigen tempered glass update:
Fits great but just does not fully adhere. There is not a single speck of dust under the screen protector and so that part of the installation went fine, but despite endless squeegee'ing those bubbles just keep coming back. It's not air that's trapped underneath but instead the screen protector just lifts back up. As you can see, all the bubbles are exactly on the edge of the screen and haven't formed on the bezel etc.
It fits great and feels nice, but the being unable to remove the bubbles is a deal breaker.
Gigio755 said:
I'm waiting for the Spigen glass here with the Spigen rugged armor here, i hope they are good
Click to expand...
Click to collapse
See my above review, hope you have more success than I have....
cd993 said:
See my above review, hope you have more success than I have....
Click to expand...
Click to collapse
Mine is ok now. I did have few small bubbles at the bottom of phone but they have disappeared now. The applicator was ready to use.
I'm happy with the the Spigen rugged case and glad screen protector.
Sent from my SM-T865 using Tapatalk
dvdman2k said:
Mine is ok now. I did have few small bubbles at the bottom of phone but they have disappeared now. The applicator was easy to use.
I'm happy with the the Spigen rugged case and glad screen protector.View attachment 5051923
Sent from my SM-T865 using Tapatalk
Click to expand...
Click to collapse
Sent from my SM-T865 using Tapatalk
dvdman2k said:
Mine is ok now. I did have few small bubbles at the bottom of phone but they have disappeared now. The applicator was ready to use.
I'm happy with the the Spigen rugged case and glad screen protector.
Click to expand...
Click to collapse
Jealous! It is a nice screen protector, I just couldn't for the life of me get rid of them bubbles and they didn't go away for me
cd993 said:
Jealous! It is a nice screen protector, I just couldn't for the life of me get rid of them bubbles and they didn't go away for me
Click to expand...
Click to collapse
Might be faulty, contact them and they should replace it.
Sent from my XQ-AT51 using Tapatalk
dvdman2k said:
Might be faulty, contact them and they should replace it.
Click to expand...
Click to collapse
Thanks yeah, I've emailed their customer service and will see what they say