Hello everyone. im using xperia x8. i try to unlock bootloader. my phone 11W43. after trying to unlock, suddenly phone dead. No LED, Cant charge, No respond at all. Any solution how to repair this kind of problem? PLS HELP
hi
emyfella said:
Hello everyone. im using xperia x8. i try to unlock bootloader. my phone 11W43. after trying to unlock, suddenly phone dead. No LED, Cant charge, No respond at all. Any solution how to repair this kind of problem? PLS HELP
Click to expand...
Click to collapse
you need jtag
kks111 said:
you need jtag
Click to expand...
Click to collapse
Is there any other way without using Jtag?
why don't u read 1st how to unlocking your bootloader? unlocking bootloader are not reccommended for W29 and above,
now you've done it,u can read how to unbrick and bring it back to life. try looking it pal. I've done it (unbricking) too many times
4thflicks said:
why don't u read 1st how to unlocking your bootloader? unlocking bootloader are not reccommended for W29 and above,
now you've done it,u can read how to unbrick and bring it back to life. try looking it pal. I've done it (unbricking) too many times
Click to expand...
Click to collapse
You've unbricked a hard bricked phone? Would love to see a tutorial for that.
cascabel said:
You've unbricked a hard bricked phone? Would love to see a tutorial for that.
Click to expand...
Click to collapse
nope, just soft-bricked of course. since mine are W12.
I've stopping using shakira since it's battery died. I've replaced it and give it to my brother with XSoul ROM.
if u want upgrading your phone, always to Read all the requirement first
like this THREAD
Related
At thread http://forum.xda-developers.com/showthread.php?t=1254225 it says i need flashtool 0.5.3 to unlock it but my question is, will it work with the newer version 0.6.5? and also do i need stock rom? I'm running GingerDX v021.
GiorgosCyprus said:
At thread http://forum.xda-developers.com/showthread.php?t=1254225 it says i need flashtool 0.5.3 to unlock it but my question is, will it work with the newer version 0.6.5?
Click to expand...
Click to collapse
Yes, newer versions are also able to do the job.
GiorgosCyprus said:
and also do i need stock rom? I'm running GingerDX v021.
Click to expand...
Click to collapse
a) Check the manufacturing date (sticker below the battery) and then search this Q&A board to make sure your phone isn't too new - you'll find several threads with a warning about phones out of 11W29 and onwards being candidates for a hard brick due to hardware changes. You can NOT revive the phone yourself - you need to send it in for repair and they will most likely change the motherboard! You've been warned to think at least twice!
b) There are several people who unlocked the boot loader while having GingerDX installed through the manual method. Safest way, or course, is to flash back to Stock and unlock from there.
B.Jay said:
a) Check the manufacturing date (sticker below the battery) and then search this Q&A board to make sure your phone isn't too new - you'll find several threads with a warning about phones out of 11W29 and onwards being candidates for a hard brick due to hardware changes.
Click to expand...
Click to collapse
There is 11W23. That means i can unlock my X8 without hard bricking it?
GiorgosCyprus said:
There is 11W23. That means i can unlock my X8 without hard bricking it?
Click to expand...
Click to collapse
11w29 above has risky!
yours 11w23...otherwise u can read the easiest guide
here http://forum.xda-developers.com/showthread.php?t=1436924
on STEP 3 if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
if u wanna check it out
thnx for answers
Unlockin bootloader with date above 11W29???
Hey guys I tried unlocking the bootloader on my x8 the manufacturing date was 11W39 so as you can guess I got THE Hardest Brick. Then i took the phone to my mobile operator, told them that it was switched off when i plugged it for charging and that when it said battery full it would not start. And it worked!!! They replaced my motherboard for free I guess the warranty was still valid apparently xD. So, I came home installed GingerDX right away but i really want to port ICS 3.0 on my x8 and i would really appreciate if someone had any ideas how to unlock the bootloader on a motherboard 12W and something above. I've read that a couple of guys managed to do it, so anyone pls help before i go and cash out 400 euros on the HTC One X.
Thanks.
mustangx8 said:
Hey guys I tried unlocking the bootloader on my x8 the manufacturing date was 11W39 so as you can guess I got THE Hardest Brick. Then i took the phone to my mobile operator, told them that it was switched off when i plugged it for charging and that when it said battery full it would not start. And it worked!!! They replaced my motherboard for free I guess the warranty was still valid apparently xD. So, I came home installed GingerDX right away but i really want to port ICS 3.0 on my x8 and i would really appreciate if someone had any ideas how to unlock the bootloader on a motherboard 12W and something above. I've read that a couple of guys managed to do it, so anyone pls help before i go and cash out 400 euros on the HTC One X.
Thanks.
Click to expand...
Click to collapse
Well, if with 11w39 you got hard brick, you will also hard brick your phone again because the motherboard is even newer. It's better to not try it. You have very very few chances to unlock bootloader with 12w and above!
Sent from my E15i using xda app-developers app. PRESS THANKS IF I HELPED.
GiorgosCyprus said:
Well, if with 11w39 you got hard brick, you will also hard brick your phone again because the motherboard is even newer. It's better to not try it. You have very very few chances to unlock bootloader with 12w and above!
Sent from my E15i using xda app-developers app. PRESS THANKS IF I HELPED.
Click to expand...
Click to collapse
Successfully UNLOCKED Xperia X8 11W35 just hour ago!
I was scared with all disccussions here but I wanted to try, however it could finish.
I had followed this guide: http://forum.xda-developers.com/showthread.php?t=1254225
I am not encourageing anyone to do so, but it is good to know that 11W29 is not the limit, maybe it is 11W35?
Or maybe it has something with guidance? For me, guides by SpiderX were succsessfull.
hello all,
today i tried to unlock bootloader of my W8 (X8) 11W44
i used this thread to get help: http://forum.xda-developers.com/showthread.php?t=1549696
s1tool said SEMC SIMLOCK CERTIFICATE so i tried to go on and use mssm7227_semc.cmd....all worked fine.
then my phone booted successfully into my rom (i was using GingerElite)
i rebooted it again to use s1tool and test it
but after that my phone was lifeless, no LED, no vibration,no recovery, no flash mode working(so i cannot use flashtool at all) and no SE Logo! :crying:
some1 pls help me to resurrect my phone please. pls don't give links of threads as i tried and research a lot already...
so what should i do now? i need help...
----------------
NOW: its back from repair now..and the bl changed to 11W33....but idk if its unlocked
you should be more careful(you can read everywhere"dont try to unlock your booloader if it is 11w29+")
the only thing you can do is:if your warranty isnt expired to sent the phone to se for repair,or buy another phone....
tdhawan1 said:
hello all,
today i tried to unlock bootloader of my W8 (X8) 11W44
so what should i do now? i need help...
Click to expand...
Click to collapse
i hope you had still the warranty.
sent from my xperia x8 using gingerzaraki
Oh, bro...wait...
U said that u successfully unlocked?
And this occurred when u try to check the bootloader status...right?
Seems like u got a hard-brick bro. Charge your battery via a external charger and try to on phone again. If it won't, then u need to send ur X8 to SE or a repair Shop.
Good Luck
Thanks all for the advice!
bandarigoda123 said:
Oh, bro...wait...
U said that u successfully unlocked?
And this occurred when u try to check the bootloader status...right?
Seems like u got a hard-brick bro. Charge your battery via a external charger and try to on phone again. If it won't, then u need to send ur X8 to SE or a repair Shop.
Good Luck
Click to expand...
Click to collapse
playjun said:
i hope you had still the warranty.
sent from my xperia x8 using gingerzaraki
Click to expand...
Click to collapse
stamatis16 said:
you should be more careful(you can read everywhere"dont try to unlock your booloader if it is 11w29+")
the only thing you can do is:if your warranty isnt expired to sent the phone to se for repair,or buy another phone....
Click to expand...
Click to collapse
First of all.....thank u all for giving me good advice on it
First of all, my phone is under warranty. :good:
Secondly, bandarigoda123 my phone booted up successfully after the process but then i powered it off again to use flash mode to detect my bootloader status. FROM THEN ON my phone died and is'nt working, tried charging up battery for 4 hours but nothing comes up, no life
`````````` I am looking further to get it repaired from SE as its under warranty but i fear that its already voided because i rooted my phone :crying:
THE THANKS BUTTON IS PRESSED BY ME FOR ALL OF THE REPLIES
tdhawan1 said:
First of all.....thank u all for giving me good advice on it
First of all, my phone is under warranty. :good:
Secondly, bandarigoda123 my phone booted up successfully after the process but then i powered it off again to use flash mode to detect my bootloader status. FROM THEN ON my phone died and is'nt working, tried charging up battery for 4 hours but nothing comes up, no life
`````````` I am looking further to get it repaired from SE as its under warranty but i fear that its already voided because i rooted my phone :crying:
THE THANKS BUTTON IS PRESSED BY ME FOR ALL OF THE REPLIES
Click to expand...
Click to collapse
tell in SE that you power x8 off put on charger and leave it fo 6h and when you came back x8 was dead
it worked for me :good:
Don't worry,they can't find out that you had rooted,just don't tell it
Sent from my X8 using xda premium
Thanx again!
stamatis16 said:
don't worry,they can't find out that you had rooted,just don't tell it
sent from my x8 using xda premium
Click to expand...
Click to collapse
fotak-x said:
tell in se that you power x8 off put on charger and leave it fo 6h and when you came back x8 was dead
it worked for me :good:
Click to expand...
Click to collapse
nice ideas guys ! I'll follow both of you! <3
Got it back from repair!
I got it repaired now and its date changed to 11W33 from 11W44..
now i wonder if its BL is unlocked now or not??
tdhawan1 said:
I got it repaired now and its date changed to 11W33 from 11W44..
now i wonder if its BL is unlocked now or not??
Click to expand...
Click to collapse
try flashing with flashtool...if it gives error and aborts flash then it is locked... if not.. congrats
.
CnC-ROCK said:
try flashing with flashtool...if it gives error and aborts flash then it is locked... if not.. congrats
Click to expand...
Click to collapse
ahhh.. thanxx...
i'm still a bit noob
and the thanks is pressed
tdhawan1 said:
ahhh.. thanxx...
i'm still a bit noob
and the thanks is pressed
Click to expand...
Click to collapse
:highfive:
so.. bootloader locked or unlocked?
I'm Stuck AGAIN~!!
no...now i soft bricked it when i copied Sony Home.apk to system/app and set permissions
x x -
x - -
x - -
even that flash mode doesn't work ..i'm stuck again! :crying:
LOL
feherneoh said:
SIGNATURE QUOTE:
Sony Ericsson Xperia E15i (X8) 10W46 White Synaptics
SIM & bootloader unlocked using SETool2
OXYDO ICS for Synaptics
Galaxy S3 Evolution
Lenovo B560
OS: Windows 8 Pro (6.2.9200) x64
OS: Ubuntu 12.04 x64
OS: Slax 6.1.2
OS: Android 4.0.3 x86
sda1 NTFS Windows 8 Pro
sda2 NTFS Lenovo Recovery
sda3 NTFS Steam
sda4 Extended
sda5 EXT3 Android x86 4.0.3
sda6 EXT4 Ubuntu 12.04
sda7 FAT32 SLAX 6.1.2
sda8 NTFS Documents
sda9 FAT32 Server
sda10 NTFS Media files
sda11 SWAP
Click to expand...
Click to collapse
ain't your signature tooo long ?? :silly:
tdhawan1 said:
no...now i soft bricked it when i copied Sony Home.apk to system/app and set permissions
x x -
x - -
x - -
even that flash mode doesn't work ..i'm stuck again! :crying:
Click to expand...
Click to collapse
cwm?.. repair with seus? if you somehow get into flash mode then install rom from flashtool... :highfive:
Flashmode should work try using SONY UPDATE SERVICE or I think ur battery is not fully charged is ur phone giving any sign of living,like vibe,light,led etc
If I helped you please press thanx
sonurockspunk said:
Flashmode should work try using SONY UPDATE SERVICE or I think ur battery is not fully charged is ur phone giving any sign of living,like vibe,light,led etc
If I helped you please press thanx
Click to expand...
Click to collapse
yeah...its a soft brick (called bootloop i guess)
the SE logo comes on the screen with an initial vibration...but i can't boot into anything like recovery or even flash mode
its stuck x(
Hi guys!
You are the only one that could help me....
A friend of mine has a G Note N7000 (white) and he wants to selll it...but....
He said that is bricked (not starting) after he tried to downgrade it from ICS to Android 2 Gingerbread....
is this gone for ever? it can be unbricked?
thank you!
please help me....i want this phone.....
Well there is alot of info about bricked notes so I advice you to do some xda searching as there are several ways to revive a bricked note. Use the search function and you'll find what you need. I would advice you to check Dr.Ketan's signature for some helpfull links. Ask your friend if he did a FULL WIPE when reverting from ICS to GB,that could be the 'source' of the brick.
So, we cause a triple murder before breakfast, start a race war before dinner - that's uh, that's a pretty good day.
my friend told me that when he tried to downgrade it, the bootloader was broken....
christty31 said:
my friend told me that when he tried to downgrade it, the bootloader was broken....
Click to expand...
Click to collapse
As him if he could boot into download mode...
If yes,there are more chances of reviving it.
Sent from my GT-N7000 using xda app-developers app
i have asked him about ....
he said that the guy who downgraded his phone did a full wipe....
any chance to revive it?
please help.....
christty31 said:
i have asked him about ....
he said that the guy who downgraded his phone did a full wipe....
any chance to revive it?
please help.....
Click to expand...
Click to collapse
well it depends... if he downgraded to GB and then wiped... it should be ok.. if on ICS and was on a safe kernel and wiped .. should be ok...
u need to get more info from him as to what exactly is the problem...
does the phone switch on...
is the download mode on the phone accessible
is the pc recognizing the phone when connected thru odin
he said that the phone is not switching on after full wipe....
ok the phone doesnot on...
but does it have access to download mode ? it is different from normally switching on (vol dwm+pwr+home)
latest news....
i took my Note to a service and they said that the phone is connecting to JTAG software, all is good, but cannot write (or something)....
what i wrong?
christty31 said:
latest news....
i took my Note to a service and they said that the phone is connecting to JTAG software, all is good, but cannot write (or something)....
what i wrong?
Click to expand...
Click to collapse
How come your friends note turned into YOUR(my) note?
Sent from my Galaxy Nexus using Tapatalk 2
irelevant....
i want the phone from him and borrowed to do some research if it can be done....
:crying: guys i trying to install bootloader using msm7227_semc then i my Phone restared but i can;t turn it on again :crying:
My Phone Number 11W38
it's is possible can turn on again? if not i will throw it and Burn it!
genuis,. http://forum.xda-developers.com/showthread.php?t=1481630
Ronald Rosanes said:
genuis,. http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
That's mean my Phone can't turn on again?
:crying::crying::crying:
No you can't, you have hard brick it. Send it to the repair shop.
another user Hard bricked!
only way is throw it to Sony to repair it.i think its free if its under warranty.
What you did was a bit silly cause you had 50 % or lower posibility for you to unlock it... Now what you can do is only as the other guys said go to a store (possibly where you bought it) and tell em to fix it or throw it away and buy a new one
I'm taking the risk (11w38)
Under warranty
wanna thank xda? here
Gogeta said:
I'm taking the risk (11w38)
Under warranty
wanna thank xda? here
Click to expand...
Click to collapse
are it succeed??
Hi, I am Julie. I shut the phone updating program on the computer while my phone is plugged. And now it is bricked. When I use the all in one AIO toolkit to repair it, it is stucked at "waiting for bootloader to initialize.", and there is no S/W stuff on my screen, it is totally black.
Could any master help me with this? Thank you soooo much!!!
JulieZ said:
Hi, I am Julie. I shut the phone updating program on the computer while my phone is plugged. And now it is bricked. When I use the all in one AIO toolkit to repair it, it is stucked at "waiting for bootloader to initialize.", and there is no S/W stuff on my screen, it is totally black.
Could any master help me with this? Thank you soooo much!!!
Click to expand...
Click to collapse
I am just wondering if I should repair the bootloader first? And how? Thanks !!!!!
Hello
This is almost an UN brickable device. There are several ROMs make nvflash and recover.
Read my thread in the dev section.
Does your device continue after this ?
Sent from my LG-P990 using xda premium
In fact I've just had an o2x in for repair, same state, so if anyone knows how to fix the bootloader,because that's the fault. Using LG repair by imei it's stuck at 4 percent. Thanks
Don't press thanks if you're not thankful.....
JulieZ said:
Hi, I am Julie. I shut the phone updating program on the computer while my phone is plugged. And now it is bricked. When I use the all in one AIO toolkit to repair it, it is stucked at "waiting for bootloader to initialize.", and there is no S/W stuff on my screen, it is totally black.
Could any master help me with this? Thank you soooo much!!!
Click to expand...
Click to collapse
HI!
go to this site: csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=0000000000000000
replace the zeroes at the end of the link with your imei, then refresh the page. then send me the link which leads to the kdz file of your phone. DO NOT POST your imei here!
try my attachment