Related
after couple of unsuccessful attempts on eBay and elsewhere I am asking here - I do not know where to buy it and have shipped to Czech Republic - any suggestions, please?
Hey, I shipped it to Holland had it in a week with this site.
http://negrielectronics.com/
Good luck.
eezdva said:
Hey, I shipped it to Holland had it in a week with this site.
http://negrielectronics.com/
Good luck.
Click to expand...
Click to collapse
on the other thread here http://forum.xda-developers.com/showthread.php?t=1172981 it is discussed what works in Europe - I am in Czech republic where we have 900/1800, which is different from negri specs, where they say 850/1900 - is it going to work?
I am not an expert on this. I have the XT860 Bell version
eezdva said:
Hey, I shipped it to Holland had it in a week with this site.
http://negrielectronics.com/
Good luck.
Click to expand...
Click to collapse
I have mine XT 862 UNLOCKED from the same source...
bogdan_wrc said:
I have mine XT 862 UNLOCKED from the same source...
Click to expand...
Click to collapse
why did you go for 862 instead of 860? Supposedly 860 should be better...
dvet said:
why did you go for 862 instead of 860? Supposedly 860 should be better...
Click to expand...
Click to collapse
1) XT862 is cheaper and has better 'support'
2) XT860 bell has only recently been available at negrielectronics, the OEM version is still not available.
DoubleYouPee said:
1) XT862 is cheaper and has better 'support'
Click to expand...
Click to collapse
what exactly do you mean by "better support"? rooting etc. should work on all of them, as discussed elsewhere...or is it not so?
DoubleYouPee said:
XT860 bell has only recently been available at negrielectronics, the OEM version is still not available.
Click to expand...
Click to collapse
it has been said elsewhere that bell does have OEM feel, there is only couple of apps added
dvet said:
what exactly do you mean by "better support"? rooting etc. should work on all of them, as discussed elsewhere...or is it not so?
it has been said elsewhere that bell does have OEM feel, there is only couple of apps added
Click to expand...
Click to collapse
Well... ROMs? I don't know whether droid 3 ROMs will work on the XT860. (Does steeldroid work on XT860?)
Yes Bell's version is close to OEM, however it's more expensive. Also, you will probably receive motorola updates faster on the OEM version.
yeap, the reasons are the ones mentioned by DoubleYouPee.
but until a CUSTOM ROM appears, the Verizon programs are there to annoy me ))
and some minor advertising appears when opening email for the first time...nothing very disturbing.
well...strange is that if you select GLOBAL mode in the phone, the phone does not find network (or mine did not find, for the first couple of minutes), but if you select GSM/UMTS, the phones works perfect.
Hello
Im from Poland so we are practically neighbors ;D
I bought my D3 from this seller
http://www.ebay.com/itm/130563324545?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
nick - inroy2000
Good contact, fast delivery, Droid3 i got unlocked, in box with phone i found
notice with unlocking codes aslo.
So I did not have to spend extra money on phone unlocking codes or purchase
To phone price you must add ~48usd for delivery and ~tax (here in Poland tax was 75 eur)
best regards
Thanks guys for all the info.
Please, correctme, if I am wrong with this:
XT860 could be rooted via psouza tools
then I can freeze motoblur apps (unless somebody changs the script to work for bell I will have to do it one by one manually)
then I am fine
DoubleYouPee said:
(Does steeldroid work on XT860?)
Click to expand...
Click to collapse
I think this is a good question.
dvet said:
Thanks guys for all the info.
Please, correctme, if I am wrong with this:
XT860 could be rooted via psouza tools
then I can freeze motoblur apps (unless somebody changs the script to work for bell I will have to do it one by one manually)
then I am fine
Click to expand...
Click to collapse
That is correct if you mean Bell apps. I have not done extensive freezing so far, so I am not sure yet what exactly you can freeze and what not.
We are stuck with Motoblur unless the bootloader gets unlocked one way or another.
EDIT:
Sorry, I misunderstood that.
Yes you are probably right
_LTB_ said:
Yes you are probably right
Click to expand...
Click to collapse
Please, have you got xt860? did you root?
...somebody else with firsthand experience here?
dvet said:
Please, have you got xt860? did you root?
...somebody else with firsthand experience here?
Click to expand...
Click to collapse
Yes and yes.
_LTB_ said:
Yes and yes.
Click to expand...
Click to collapse
sounds encouraging
- how did U root? psouza4?
- which apps did you froze? How? Titanium backup?
_LTB_ said:
Yes and yes.
Click to expand...
Click to collapse
Do you have the Camera blue-tint bug? On my Droid 3 this bug was fixed, but on the XT860?
Thanks for a quick reply.
Rotkaeqpchen said:
Do you have the Camera blue-tint bug? On my Droid 3 this bug was fixed, but on the XT860?
Click to expand...
Click to collapse
from other posts I understood that fixing this is just a matter of some settings in text configuration files, so this should be possible to fix on XT860 as well - or am I wrong?
I don't know, maybe someone can answer this.
Ok, I am not sure but I own a Droid 3 and use it in Germany. The signal quality is definitely not as good as it has been on my Milestone 2.
Do both XT860 and Droid 3 use exactly the same Hardware GSM Module? I believe I saw somewhere that the XT860 has 14.4 mbits and Droid 3 "only" 10.2 mbits.
What do you think?
I have a US lg thrill flashed to gingerbread (thanks to everyone here) and it is rooted, but I am still getting edge service!! I need 3 or 4g service, I use my phone for a variety of reasons and edge isn't cutting it! What else do I need to do? I used V21D_00.kdz to flash and megatron to root. Thanks to everyone!!
Flash 20c it is Canadian and has the same baseband then u may still need to set your apn or you can flash lestatious biohazard if you have any questions there are guides to help with everything
Sent from my LG-P920 using XDA
I tried that but it says I have the latest update and closes the program. Any links on where I need to go to get this mission complete? Thanks again for everyones help. Ok got it installed and still no 3 or 4g!! What is the deal! This is driving me crazy!!
trayluv73 said:
I have a US lg thrill flashed to gingerbread (thanks to everyone here) and it is rooted, but I am still getting edge service!! I need 3 or 4g service, I use my phone for a variety of reasons and edge isn't cutting it! What else do I need to do? I used V21D_00.kdz to flash and megatron to root. Thanks to everyone!!
Click to expand...
Click to collapse
i was using 3G with T-Mobile since the euro baseband was released for the Optimus 3D. all you have to do is load the baseband and os onto your phone then go to settings - wireless networks-mobile networks- network mode- 3G only and ucheck use only 2G networks. after a while it would pick up the 3G signal. 4G might work but since I have Simple Mobile 4G isnt activated on my plan. Hope you get it to work for you.
So I need to download the EU baseband and install that. After that do what? When I goto my settings there is no setting for me to turn on or off 3g! There is no settings at all! Can someone please post some pics of this because this is really rubbing me the wrong way. I've been at this for over a week!! Thanks again for everyone who has been helping.
trayluv73 said:
So I need to download the EU baseband and install that. After that do what? When I goto my settings there is no setting for me to turn on or off 3g! There is no settings at all! Can someone please post some pics of this because this is really rubbing me the wrong way. I've been at this for over a week!! Thanks again for everyone who has been helping.
Click to expand...
Click to collapse
Make sure the phone you have IS the Thrill 4G 3D, for AT&T
after you've made sure is the correct phone, then load the KDZ or BB as is also called and make sure is V21D, I have tried V20C and it doesn't work
So after you've loaded V21D.
let it boot, go into wireless settings, access point, press menu and enter your own T-Mobile APN. The one I use is listed on the other thread about using tmobile 3g on the thrill, look for it, and good luck.
I'll post some screenshots when my daughter comes back from school later today and show the thrill running H on t-mobile network
Ok, did it again and still the same problem. I have a 4g lg thrill. This is crazy, why am I having such a problem?!!
screen shots as promissed
ok I look at your screens and the only thing I see different is that you only have tmobile listed as your apn but I have att phone and att wap listed on my phone. I do have the blue do on my tmbile and I've saved the apn. I think that maybe the problem. Is there a way to get rid of them? Thanks man for all your help, I feel I might get this taken care of.
when you are in the apn screen go into the att ones as if you're gonna modify them
press menu and delete, that should take care of your problem
it wont give me an option to delete or change them. Im going to post some pics of my phone so you can see.
Here are the pics of my sceen.
trayluv73 said:
Here are the pics of my sceen.
Click to expand...
Click to collapse
Your problem is you STILL HAVE V20P
get rid of it and flash V21D, and then you'll have option to put your own APN
I see now where it says software version but I've downloaded the v21 6 different times! I've even done a google search and I will end up here for the version. The links I've tried here all give me the same one. I even downloaded another one last night before I went to bed and installed it and I'm still stuck with this one. How big is v21 so I know I have it exactly. I will put up screen shots of my computer to show you how many times I've downloaded them and what they say. If you have a link to where I can get it and you know its the correct one, please post it or send it to me at my name at hotmail. Thanks.
trayluv73 said:
I see now where it says software version but I've downloaded the v21 6 different times! I've even done a google search and I will end up here for the version. The links I've tried here all give me the same one. I even downloaded another one last night before I went to bed and installed it and I'm still stuck with this one. How big is v21 so I know I have it exactly. I will put up screen shots of my computer to show you how many times I've downloaded them and what they say. If you have a link to where I can get it and you know its the correct one, please post it or send it to me at my name at hotmail. Thanks.
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP920/AESOML/v21d_00/V21D_00.kdz
trayluv73 said:
Here are the pics of my sceen.
Click to expand...
Click to collapse
Pro tip # 209
Press lock screen button and home key to take a screen shot.
Sent from my LG-P920 using xda premium
What I think is happening is the lg mobile tool is downloading the v20 and installing that. It always downloads a file that is around 425mb then installs that. What do I need to do to stop that from happening?
trayluv73 said:
What I think is happening is the lg mobile tool is downloading the v20 and installing that. It always downloads a file that is around 425mb then installs that. What do I need to do to stop that from happening?
Click to expand...
Click to collapse
if you've followed this thread
http://forum.xda-developers.com/showthread.php?t=1535769
and that didn't help you, then start over from the beginning and erase all the lg drivers in your computer, start fresh.
and if that doesn't help, then I guess The Dark Lestat can teamviewer you if he has time.
I wanted to try his other way but smallsrv link is dead and after searching for it for days all I get are dead ends! This is frustrating as hell!!!
trayluv73 said:
I wanted to try his other way but smallsrv link is dead and after searching for it for days all I get are dead ends! This is frustrating as hell!!!
Click to expand...
Click to collapse
http://smallsrv.com/shttp3.exe
---------- Post added at 07:31 AM ---------- Previous post was at 07:29 AM ----------
trayluv73 said:
I wanted to try his other way but smallsrv link is dead and after searching for it for days all I get are dead ends! This is frustrating as hell!!!
Click to expand...
Click to collapse
http://smallsrv.com/
Hello
Just put my N1 back to Gingerbread 2.3.6 and now I cannot make or receive calls or send messages. My sim card is working fine because I have taken it out of my N1 and have used it in my other back up phone with no trouble. I have also taken my son sim card out of his phone and put it into my N1 and still get the same thing.
When the sim card is in the N1 and the phone boots up, it says Emergency calls only up in the notification area. When I try to go to the key pad, and dial a number, I get an error message stating Mobile Network Not Available. Not sure why this is. My account is up to date and is registered on the network according to ATT when I call them.
Anyone who can point me in the right direction, I would greatly appreciate. Thank you so much.
Check your apn settings. Search if you don't know how.
Sent from my PantechP9070 using xda app-developers app
khernden69 said:
Hello
Just put my N1 back to Gingerbread 2.3.6 and now I cannot make or receive calls or send messages. My sim card is working fine because I have taken it out of my N1 and have used it in my other back up phone with no trouble. I have also taken my son sim card out of his phone and put it into my N1 and still get the same thing.
When the sim card is in the N1 and the phone boots up, it says Emergency calls only up in the notification area. When I try to go to the key pad, and dial a number, I get an error message stating Mobile Network Not Available. Not sure why this is. My account is up to date and is registered on the network according to ATT when I call them.
Anyone who can point me in the right direction, I would greatly appreciate. Thank you so much.
Click to expand...
Click to collapse
You flashed a TMOBILE radio to your AT&T device... flash the original radio back and you should be all good to go.
mikey199 said:
Check your apn settings. Search if you don't know how.
Sent from my PantechP9070 using xda app-developers app
Click to expand...
Click to collapse
Hello
That is the first thing I did. They won't even stay on the phone after I put them all in. Can you please help me?
race55 said:
You flashed a TMOBILE radio to your AT&T device... flash the original radio back and you should be all good to go.
Click to expand...
Click to collapse
Can you please tell me where I can get the ATT one? This where I got the stock rom from. Can you please help me? Is this not the right one? The one below from the link.
http://forum.xda-developers.com/showthread.php?t=1312540
i dont kn ow what he means... it is the same radio. the link you posted is the right thing you need to flash. if you followed the directions and the bootloader actually flashed it, i dont see how there can be any problems, i think maybe a hardware issue? try cleaning the Sim slot or something?
You might have posted the same with a tiny bit less useless headline.
First question: do you have TMO or AT&T N1 version?
In any case, disregard the "wrong radio" answer, it's wrong. The radios are the same. The APNs are also not the culprit, so disregard that too. The phone doesn't lie - you don't have cellular connection, and you need to find the reason for it.
Jack_R1 said:
You might have posted the same with a tiny bit less useless headline.
Click to expand...
Click to collapse
+1
Jack_R1 said:
You might have posted the same with a tiny bit less useless headline.
First question: do you have TMO or AT&T N1 version?
In any case, disregard the "wrong radio" answer, it's wrong. The radios are the same. The APNs are also not the culprit, so disregard that too. The phone doesn't lie - you don't have cellular connection, and you need to find the reason for it.
Click to expand...
Click to collapse
You, mate, are wrong. Radio's between AT&T and T-Mobile Version do differtiate.
race55 said:
You, mate, are wrong. Radio's between AT&T and T-Mobile Version do differtiate.
Click to expand...
Click to collapse
The firmware doesn't.
tommert38 said:
The firmware doesn't.
Click to expand...
Click to collapse
But flashing a T-Mobile radio to a at&t device sounds like trouble to me
Sent from my HTC Flyer P512 using xda app-developers app
race55 said:
But flashing a T-Mobile radio to a at&t device sounds like trouble to me
Click to expand...
Click to collapse
There are no different radio firmwares for AT&T and T-Mobile to flash, they use exactly the same firmware. And don't start arguing, because you're wrong. Maybe you should check out the wiki first..
The only difference between the two are the radio frequencies they use, but that has nothing to do with firmware version (in case of our Nexus One).
tommert38 said:
There are no different radio firmwares for AT&T and T-Mobile to flash, they use exactly the same firmware. And don't start arguing, because you're wrong. Maybe you should check out the wiki first..
The only difference between the two are the radio frequencies they use, but that has nothing to do with firmware version (in case of our Nexus One).
Click to expand...
Click to collapse
I still disagree. Because potato.
Sent from my Nexus One using xda app-developers app
race55 said:
I still disagree. Because potato.
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
You can disagree till the end of the world, you're obviously wrong, and I wrote half of the damn Wiki.
Jack_R1 said:
You can disagree till the end of the world, you're obviously wrong, and I wrote half of the damn Wiki.
Click to expand...
Click to collapse
Still, i disagree, because the wiki is written by you.
Yeah yeah. When you manage to find a "T-MO radio", let me know.
Jack_R1 said:
Yeah yeah. When you manage to find a "T-MO radio", let me know.
Click to expand...
Click to collapse
Uhm...... y u no have humor?!
Sent from my Nexus One using xda app-developers app
It was in humor. Forgot to add this:
Jack_R1 said:
It was in humor. Forgot to add this:
Click to expand...
Click to collapse
Nah i'm just kiddin you bro. But i srsly read somewhere that there was radio difference.
There isn't, as there aren't different radios (baseband builds) to begin with. The same OTA/PASSIMG firmware update applies to both TMO and AT&T phones in exactly the same way, and this firmware contains baseband update - directly from Google. So you won't find any provider-specific radios. The only thing is that Korean N1 has a newer radio, since it had a newer build release. And this radio also works for both.
I got my new updated firmware that came out with 4.3 flashed on my sprint htc one flashed to straight talk verizon s-off with moonshine. What are the improvements that I"am supposed to see ????
I have had problems with all 4.3 roms and I have tried them all, my call signal most times shows zero bars when its full signal, sometimes it will go full bars but always goes back to none fast and the phone is never moved.
I thought flashing the 4.3 firmware would fix this issue but it did not.
Another thing is I use it on a verizon samsung network extender at home which its the old model the first model they came out with that was call signal only no 3g data were the newer model has 3g, but I notice it does this when I"am not home sometimes also but I have not really watched it while running errands in a good while. When I"am on the network extender when I call out or on a call received my phone will show full bars the whole time.
I think its working ok, but the no bars on my phone is annoying I mean I might as well not even have bars on my phone at all if they are not going to be accurate.
Anyone have any ideas ?
Roefastford said:
I got my 4.3 firmware flashed on my sprint htc one flashed to straight talk verizon s-off with moonshine. What are the improvements that I"am supposed to see ????
I have had problems with all 4.3 roms and I have tried them all, my call signal most times shows zero bars when its full signal, sometimes it will go full bars but always goes back to none fast and the phone is never moved.
I thought flashing the 4.3 firmware would fix this issue but it did not.
Another thing is I use it on a verizon samsung network extender at home which its the old model the first model they came out with that was call signal only no 3g data were the newer model has 3g, but I notice it does this when I"am not home sometimes also but I have not really watched it while running errands in a good while. When I"am on the network extender when I call out or on a call received my phone will show full bars the whole time.
I think its working ok, but the no bars on my phone is annoying I mean I might as well not even have bars on my phone at all if they are not going to be accurate.
Anyone have any ideas ?
Click to expand...
Click to collapse
Not convinced you actually know what you're talking about. For one, the firmware version is not 4.3-- that's the ROM software version, which is very distinct from the radio version that came with the 4.3 OTA. 4.3 changed how cell signal is displayed to match the available/in-use data connection as opposed to the 1xRTT voice/text connection. Besides that, if you're using the Sprint HTC One on Verizon, you're not going to get particularly good speeds even with 3G.
If you don't like the behavior, there's probably an XPOSED module or a downgrade to 4.1 to fix that.
I dont know where your getting your info, but there are firmware downloads for people that are rooted and do not receive htc / sprint ota updates for 4.3.
Check out the following and see for yourself...
http://forum.xda-developers.com/showthread.php?p=46123838
Then see either full firmware or Full Firmware w/o hboot, boot, recovery (for s-off users (thx bigdaddy619 for testing!!!)
The phone is capable of running verizon 3g just as well as sprint 3g.
Unless you have a sprint htc one on straight talk verizon like I do then you have no idea of how verizon 3g data works on a sprint htc one and you are providing an uneducated guess, which straight talk verizon 3g data speeds are not any part of this posting.
Perhaps could it be you either work for verizon or sprint and just hope to deter people from flashing their sprint htc one or any other smartphone to straight talk verizon ????
If verizon was not so much of blood sucking company trying to squeeze every penny they can from their post paid subscribers and would compete with sprint and t mobile and even more on the prepaid side where sprint mvno's get lte and t mobile prepaids get lte and even at&t prepaids get lte even straight talk at&t gets lte, but verizon will not compete and allow lte, this will all be verizons undoing, because with sprints infusion of cash from softbank they will be building lte very quickly and when sprint merges with t mobile in the near future then verizon will be strong armed to either compete or be left behind and they will be put down like a dead horse and many people like myself will love to see the day that their greediness and cockiness comes back to haunt them and they will then pay for their arrogance...
Roefastford said:
I dont know where your getting your info, but there are 4.3 firmware downloads for people that are rooted and do not receive htc / sprint ota updates.
Click to expand...
Click to collapse
You may want to read a little. 4.3 is not the firmware version, but the ROM version. The current firmware is a 1.x release, even still.
Roefastford said:
And Using a sprint htc one on straight talk verizon does give good speeds on 3g, as good as 3g speeds can be.
The phone is capable of running verizon 3g just as well as sprint 3g.
Unless you have a sprint htc one on straight talk verizon like I do then you have no idea of how verizon 3g data works on a sprint htc one and you are providing an uneducated guess, which straight talk verizon 3g data speeds are not any part of this posting.
Click to expand...
Click to collapse
The entirety of your complaint is you complaining about "bars" and real signal strength/speeds. The actual data behind the bars are related to both, but you don't seem to have any idea what the bars are. They represent the strength of your data radio if you're connected to data, 1XRTT if you're on a voice call.
Roefastford said:
Perhaps could it be you either work for verizon or sprint and just hope to deter people from flashing their sprint htc one or any other smartphone to straight talk verizon ????
Click to expand...
Click to collapse
That's cute. You can't answer a substantive question so you accuse me of being a shill. Adorable, but wholly irrelevant.
Roefastford said:
If verizon was not so much of blood sucking company trying to squeeze every penny they can from their post paid subscribers and would compete with sprint and t mobile and even more on the prepaid side where sprint mvno's get lte and t mobile prepaids get lte and even at&t prepaids get lte even straight talk at&t gets lte, but verizon will not compete and allow lte, this will all be verizons undoing, because with sprints infusion of cash from softbank they will be building lte very quickly and when sprint merges with t mobile in the near future then verizon will be strong armed to either compete or be left behind and they will be put down like a dead horse and many people like myself will love to see the day that their greediness and cockiness comes back to haunt them and they will then pay for their arrogance...
Click to expand...
Click to collapse
Armchair analysis at its finest. Pray, do carry on.
Checkout the following, you seem to like to talk out of your about things you have no clue about.
http://forum.xda-developers.com/show...php?p=46123838
See Full Firmware and firmware w/o hboot, boot, recovery (for s-off users (thx bigdaddy619 for testing!!!)
Roefastford said:
Checkout the following, you seem to like to talk out of your azz about things you have no clue about...
http://forum.xda-developers.com/show...php?p=46123838
See Full Firmware and firmware w/o hboot, boot, recovery (for s-off users (thx bigdaddy619 for testing!!!)
Click to expand...
Click to collapse
Excuse me the firmware is not called 4.3 its just with the 4.3 update, if would have read that you would have realized that and not tried to be a know it all thinking you know everything which you clearly do not.
Roefastford said:
Checkout the following, you seem to like to talk out of your azz about things you have no clue about...
http://forum.xda-developers.com/show...php?p=46123838
See Full Firmware and firmware w/o hboot, boot, recovery (for s-off users (thx bigdaddy619 for testing!!!)
Click to expand...
Click to collapse
That's pretty ironic, all things considered. I've provided some of the information you were looking for (how and why signal bars may be showing as lower than before with the new firmware), but instead you've posted even more links proving you don't know what you're talking about. Neither the touch control or radio firmware version numbers are even near 4.3. Feel free to keep digging your own hole, though.
Rirere said:
That's pretty ironic, all things considered. I've provided some of the information you were looking for (how and why signal bars may be showing as lower than before with the new firmware), but instead you've posted even more links proving you don't know what you're talking about. Neither the touch control or radio firmware version numbers are even near 4.3. Feel free to keep digging your own hole, though.
Click to expand...
Click to collapse
My links prove you have no clue what your talking about. You make assumptions about things you have no clue about. You know what they say about people that assume...
Roefastford said:
My links prove you have no clue what your talking about. You make assumptions about things you have no clue about. You know what they say about people that ASSume...
Click to expand...
Click to collapse
Your link proves that you don't know how to actually post links on this forum; besides that, you ignore the posts OMJ's made in the radio threads discussing what kinds of firmware are available-- and yes, those are hboot, radio, and touch. Nice try though.
As I explained jack*** its the new firmware that came with the 4.3, you work so hard to be as much of a jack*** as you possibly can be. The links show the downloads for the new firmware. Try not being such an a** you act like your such a know it all, well you can get off the high horse you think your riding and you know what you can do with your attitude, where you can put it...
You've given it a valiant effort Rirere, bravo to you sir.
Mods should probably scrap this now since the op has decided to instigate a flamewar instead of reading the threads he is linking to as "support" for his statements.
Sent from my One using Tapatalk
This post was not to ask your personal opinions on anything. The guy just set out to set himself as knowing everything and he does not. He could have easily read in to it and taken the high road but instead he chose to try to put down what I was asking. I dont need anyone trying to be high and mighty thinking they are better. He started things he had no right to post to begin with because he never had an intension on helping, only to try to put me down and act like he is a know it all...
Roefastford said:
This post was not to ask your personal opinions on anything. The guy just set out to set himself as knowing everything and he does not. He could have easily read in to it and taken the high road but instead he chose to try to put down what I was asking. I dont need anyone trying to be high and mighty thinking they are better. He started things he had no right to post to begin with because he never had an intension on helping, only to try to put me down and act like he is a know it all...
Click to expand...
Click to collapse
I feel like a language barrier is making this worse than it ought to be..
He very clearly explained himself in his first reply to you. It might have started out a bit condescending but he promptly explained why he felt that way.
Your replies to him hint that you don't understand what he has been explaining. Try asking people to elaborate instead of name calling, it helps makes xda a nicer place to visit.
Sent from my One using Tapatalk
I never said anywhere on here that I dont have good signal I said that my phone just shows that I don't but in all actuality I have full signal strength the phone just does not show it unless there is a call in progress.
Anyone please do not post on this unless you can do so without an attitude and if your post is not about this subject then you should not be posting on this.
allo_87 said:
I feel like a language barrier is making this worse than it ought to be..
He very clearly explained himself in his first reply to you. It might have started out a bit condescending but he promptly explained why he felt that way.
Your replies to him hint that you don't understand what he has been explaining. Try asking people to elaborate instead of name calling, it helps makes xda a nicer place to visit.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Please do not post unless your posting about the topic, as this is not a personal posting asking for anyones opinions about anything else.
Roefastford said:
Please do not post unless your posting about the topic, as this is not a personal posting asking for anyones opinions about anything else.
Click to expand...
Click to collapse
OK, here is me still being on topic.
Read his first reply again. He is correct. The signal bars you see do not represent the same thing they used to. If you don't understand what he meant, ask for more information.
If you are on a custom rom, try posting in that rom's thread, especially if signal is not displaying at all.
Hell, just post in that thread anyway since you obviously don't believe the information you've been provided here!
Based on what info you've given, I don't know how much more you'll get from anyone though...
Sent from my One using Tapatalk
allo_87 said:
OK, here is me still being on topic.
Read his first reply again. He is correct. The signal bars you see do not represent the same thing they used to. If you don't understand what he meant, ask for more information.
If you are on a custom rom, try posting in that rom's thread, especially if signal is not displaying at all.
Hell, just post in that thread anyway since you obviously don't believe the information you've been provided here!
Based on what info you've given, I don't know how much more you'll get from anyone though...
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I know for a fact that the problem is software related I dont need anyone to tell me that.
His comments were off topic, he was trying to tell me that there is no firmware update that came out for 4.3 which is wrong. Excuse me for calling it 4.3 firmware when it has its own number I dont need anyone acting like that trying to tell me things that I know are true.
I did post on elegancia rom but they the main guys run the gsm version of htc one and do not do anything on the sprint side some other guys do so the sprint support is not as kept up as the gsm stuff is.
I was only trying to figure out what problems were fixed in the new firmware if there were and fixes in call signal accuracy or anything like that.
I just dont need anyone acting like they know everything trying to tell me I"am wrong.
Almost every 4.3 custom rom for the htc one says they recommend that you upgrade your firmware which that guy was trying to tell me there is no firmware upgrade for 4.3 which there is and I posted the links for it. I dont need anyone trying to tell me something that I"am wrong when I"am not and I proved it.
Roefastford said:
I did post on elegancia rom but they the main guys run the gsm version of htc one and do not do anything on the sprint side some other guys do so the sprint support is not as kept up as the gsm stuff is.
I was only trying to figure out what problems were fixed in the new firmware if there were and fixes in call signal accuracy or anything like that.
Click to expand...
Click to collapse
You are asking us on the sprint HTC one forums about fixes for a rom built for gsm HTC one?
I have no idea how to answer you, try this:
http://www.android.com/about/jelly-bean/
Sent from my One using Tapatalk
allo_87 said:
You are asking us on the sprint HTC one forums about fixes for a rom built for gsm HTC one?
I have no idea how to answer you, try this:
http://www.android.com/about/jelly-bean/
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Its not for just gsm, its gsm and sprint, you didnt read what I posted clearly. I said the main guys use gsm they have sprint guys that help out on the sprint support so the sprint support is not as quick to update as they have to contact the sprint guys on the sprint issues. The rom is for gsm and sprint.
Im looking for a guy whos willing to do a nv dump for me and upload it for me..i want to try compare it to a locked phone and see if i can find the difference..
Right now I have one that's "locked" but since I had the 30 day Temp Unlock (Expired 3 days ago) I seem to be able to still use it with my STalk (At&t) SIM. If you want me to do it for you anyway I will, or I will have it officially unlocked by TMob in about 5 more days and I can do it for you then if someone else hasn't already.
If you want me to do it for you, point me to directions to getting a NV dump and I will do it ASAP.
MoodSwinger said:
Right now I have one that's "locked" but since I had the 30 day Temp Unlock (Expired 3 days ago) I seem to be able to still use it with my STalk (At&t) SIM. If you want me to do it for you anyway I will, or I will have it officially unlocked by TMob in about 5 more days and I can do it for you then if someone else hasn't already.
If you want me to do it for you, point me to directions to getting a NV dump and I will do it ASAP.
Click to expand...
Click to collapse
once ill get my phone back ill do a dump and then ill select temperary unlock and then ill dump again..that way ill forsure know that they shud be identical..hopefully that'll work..
Do you want me to do one now then another, once it gets Unlocked, that way too you can see what's different, if anything on the same device?
MoodSwinger said:
Do you want me to do one now then another, once it gets Unlocked, that way too you can see what's different, if anything on the same device?
Click to expand...
Click to collapse
the problem is it's not an easy process to dump...my computer crashed on me and now i dont have my tools and files anymore...it'll take me a week before im up and going..im positive i can get it..
edit..that me google android using my bros computer and account
Haha I didn't even realize I kind of assumed it was you, guess I need to pay better attention. Anyhow, that's cool, if there's anything I can do let me know.
How do you do an nvram dump?
siraltus said:
How do you do an nvram dump?
Click to expand...
Click to collapse
dont have pc and trying to give direction on top of my head... bring up the service mode 277634#*# on the bottom check port settings....next use the QPTS software..connect phone and select software update next go to backup tab and back it up.... its a very rough tutorial but best i can do right now