Related
hi can caomeone please tell me if the batteries for the s710 withthe covers fit on s730, ive found on ebay one with 2250mah, is it a bigger one, ot it also so thin as the original?
or can someone told me where to get one, which has this conditions...
thanks
The battery is same but the cover doesnt fit.
There is already topic about bigger batteries so look there for more details.
moneytoo said:
The battery is same but the cover doesnt fit.
There is already topic about bigger batteries so look there for more details.
Click to expand...
Click to collapse
yes, ive made already some post in the past there,but without response...
www.expansys.com
I have 2 free £15 vouchers, which would be the best option?
Thanks
Don't know what cases you are on about but the advice I would give you this:
If you intend to use the phone in the case all the time then the design that you should go for is one that leaves the whole face of the HD2 open to you otherwise you will have problems operating the phone.
Alternatively go for a case where you can take the phone out to use; however make sure the case completely holds the phone in securely when its in there.
SuperEtrader were selling a belt pouch where you could not even close the flap when the phone was in it. They claimed it was HD2 compatible.
Finally, having bought 5 cases now, you get what you pay for......
WB
I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...
nutmegy said:
I've got
http://www.expansys.com/d.aspx?i=190797
PDair Horizontal Pouch case...
Works pretty well.. magnetic clasp... with belt clip... good quality...
Click to expand...
Click to collapse
i have just bought one of these for work. very good quality for the money. my only complaint is that the hard-buttons can sometimes get pressed and cause the fone to wake, depending on where you have it on you and what you are doing.
all-in-all, a good pouch.
drkmtr
Thanks
It would be nice if I could see a video of http://www.expansys.com/d.aspx?i=190797
http://www.youtube.com/watch?v=k5R_qBOEzCI
Wevenhuis said:
http://www.youtube.com/watch?v=k5R_qBOEzCI
Click to expand...
Click to collapse
Thanks, now I dont think Ill get it, I was hoping for something that the leo permanently stayed in and was accesible from
I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.
cMMY69 said:
I was going toi to tell what I had ordered from Expansys and awaiting delivery for but I've just checked and the Mizu Shell - http://www.expansys.com/d.aspx?i=192254 is now discontinued and the and a Silicon Case for HTC HD2 http://www.expansys.fr/p.aspx?i=192270 is no loonger mentioned on the UK site (so I provided the link to the french.
So Im afraid that I can't help you.
Click to expand...
Click to collapse
Well that sucks....
Tell me how it is anyway will ya?
http://www.proporta.com/F02/PPF02P05.php?t_id=4862&t_mode=des
try this for a Pouch instead of a case? thinking of getting it. with the hd2 having similar dimensions to the iphone try some of the cases for that as their is millions of them
HD2 = 121 x 67 x 11 mm
Iphone 3G = 115.5 x 62.1 x 12.3 mm
Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though
[★] said:
Im looking for something which the phone constantly stays in, which can be opened via a flap like thing, which isnt bulky.
thanks though
Click to expand...
Click to collapse
do you mean like this see pics
gordofski said:
do you mean like this see pics
Click to expand...
Click to collapse
yeah thats pretty cool dont like the colour or material though, nice style though
case
http://www.cases.com/pf456.htm
The best
I have cases available,
interested PM please
I have one of these cases. I must say, it does protect the phone, but i didnt use it after 1 day, because it is so bulky, and the picture is kind of deceiving. It actually doesnt look that nice.
meeporox said:
I have one of these cases. I must say, it does protect the phone, but i didnt use it after 1 day, because it is so bulky, and the picture is kind of deceiving. It actually doesnt look that nice.
Click to expand...
Click to collapse
you must have the wrong case, its not bulky its slimmer than some of the more expensive cases that you can buy, and the picture is not deceiving
Is it available in black? That tan tonality is pretty awful
dudu7559 said:
Is it available in black? That tan tonality is pretty awful
Click to expand...
Click to collapse
+1
10 char
hi, i'm from malaysia. is the case available in malaysia? how can i get that?
hi, i'm from malaysia, can i get the case in malaysia? please reply me at [email protected]
any1 got this case and willing to post some pics of the case?
http://www.mobimega.com/momax-icase-pro-pc-tpu-for-htc-hd2.html
thanks in advance!
dudu7559 said:
Is it available in black? That tan tonality is pretty awful
Click to expand...
Click to collapse
sorry only available in brown not as bad as you think,
I got a same few days on eBay. It looks good but a plastic doesn’t hold the device properly, phone was moving inside case. I had to put some felt pads on the side.
lachutm said:
I got a same few days on eBay. It looks good but a plastic doesn’t hold the device properly, phone was moving inside case. I had to put some felt pads on the side.
Click to expand...
Click to collapse
My phone doesn't move inside the plastic casing......perfect
Sorry but ofcourse yours one is great. Yours one is perfectly ervrything fits exactly. The leather is form high quality. It holds your phone perfectly... blabla.
That because you wanna sell that case
gordofski said:
you must have the wrong case, its not bulky its slimmer than some of the more expensive cases that you can buy, and the picture is not deceiving
Click to expand...
Click to collapse
I believe i got it from your ebay account.
http://myworld.ebay.co.uk/2318gordon/
i might be wrong though if that's not you. But the pictures are exactly the same. I am not saying the case is not good, just that it is a bit bulky, and doesnt actually look as good as the picture. Just my 2 cents
jan-willem3 said:
Sorry but ofcourse yours one is great. Yours one is perfectly ervrything fits exactly. The leather is form high quality. It holds your phone perfectly... blabla.
That because you wanna sell that case
Click to expand...
Click to collapse
You don't want the case then ? LoL
I already got this and it fits my HD2 perfectly. Looks good too.
So I was over at pocketnow.com and saw the extended battery and its cover has an awesome kickstand. Also, the Evo 4G has a kick stand. Is there one for the HD2 that is not fat but has a kick stand? That would be super cool.
Buy the T-Mobile body glove case. Has a kickstand. Check out my thread where i'm desperate to find a case lol.
PurpleLlamaLover said:
Buy the T-Mobile body glove case. Has a kickstand. Check out my thread where i'm desperate to find a case lol.
Click to expand...
Click to collapse
I bought that one from the T-Mobile too. it is lil' fat but I like it, better than the case that came with the phone.
I got the same case, worth the 20$, since the plastic is a lil sturdier than the cases i buy off ebay
Please post and show your support on a Thread I made over in the T Mobile Community forum about this ....
Basically what it is , is I'm trying to get people to rally behind this thread and show T Mobile and HTC that there are people out there who want an extended battery that uses the factory back plate and have an option factory back plate with a kick stand ... so Please post and show your support ....
RippSpeed said:
Please post and show your support on a Thread I made over in the T Mobile Community forum about this ....
Basically what it is , is I'm trying to get people to rally behind this thread and show T Mobile and HTC that there are people out there who want an extended battery that uses the factory back plate and have an option factory back plate with a kick stand ... so Please post and show your support ....
Click to expand...
Click to collapse
can you post a link for that. thanks
amkothaw said:
can you post a link for that. thanks
Click to expand...
Click to collapse
x2 - ditto - fx
Bumping this thread.
I'm really interested in extended battery kickstand but without the bulk. Is there a battery cover replacement that has a built in kick stand?
So like title said, post links / names of cases you can find online, for now there is only two options avaiable:
https://www.verizonwireless.com/accessories/verizon-two-tone-bumper-case-for-moto-z-play-droid/
https://www.incipio.com/cases/smart...cases/moto-z-play-droid-co-molded-bumper.html
The second one is not mod friendly. I've it and it doesn't fit car dock or back style mods.
drvoje said:
So like title said, post links / names of cases you can find online, for now there is only two options avaiable:
https://www.verizonwireless.com/accessories/verizon-two-tone-bumper-case-for-moto-z-play-droid/
https://www.incipio.com/cases/smart...cases/moto-z-play-droid-co-molded-bumper.html
Click to expand...
Click to collapse
I'll vouch for the Verizon bumper case. So far all the mods I have fit with this on. I know its not a full case, but it protects the siding and gives you the ability to hot swap mods all day
I have the famous YouTube review video showing how terrible the Incipio bumper is. It doesn't even work with their own battery pack. Just poor engineering and design.
Is there any more options beside this two? Because verizon is not available to Europe?
found this one, but seems ... meh..
http://www.ebay.com/itm/Bumper-Hull...hash=item2cb1bc7c5d:m:mfyawQRORjPhUzy0W1tvT1w
I backed the Edge Shield Bumper, at Indiegogo. But it will take some more time to deliver because Lenovo/Motorola asked for a legal agreement, this month. So I have to wait to see it's quality.
i am aware of edge bumper but its not available...
just an update, found this as well, will order it and test it out
http://www.ebay.com/itm/Luxury-Alum...hash=item46617fd53b:m:mgaxLvfprj1bg9tMQdetkKw
NOTE: did not order because seller said it does not work with mods
Definitely want to know if it's mod friendly
Verizon one just broke on me. Lasted about 5 months. I want another one because it is the only one that works. Any idea where I can buy? I would love the edge shield when it comes.
Just received a Sparin TPU case for the MZP from Amazon today. The best part is that it fits OVER the style shell and all. Yeah, it's a tight squeeze and the top mic hole is a little bit off and it is a bit of a pain to remove, but it works. Don't know how long his case will hold up without cracking or yellowing, but so far I'm impressed. Buttons are able to be clicked and power cord inserted. Got a 2 pack for less than $10 shipped.
Oh, and no hole for the pins either.
RepublicImages said:
Just received a Sparin TPU case for the MZP from Amazon today. The best part is that it fits OVER the style shell and all. Yeah, it's a tight squeeze and the top mic hole is a little bit off and it is a bit of a pain to remove, but it works. Don't know how long his case will hold up without cracking or yellowing, but so far I'm impressed. Buttons are able to be clicked and power cord inserted. Got a 2 pack for less than $10 shipped.
Oh, and no hole for the pins either.
Click to expand...
Click to collapse
Can you please provide link to those cases?
St.Noigel said:
Can you please provide link to those cases?
Click to expand...
Click to collapse
Here's the description on Amazon. It won't let me post the URL. I'll try and provide pics of the case later today.
SPARIN [2 Pack] Moto Z Play Case, [Lightweight] [Anti Scratch] TPU Case for Motorola Moto Z Play Android
Link, please.
Sent from my XT1635-02 using Tapatalk
Zeljko1234 said:
Link, please.
Sent from my XT1635-02 using Tapatalk
Click to expand...
Click to collapse
He can't post links. ))
So you can just Google it.
I can do it for you.
https://www.amazon.com/SPARIN-Moto-Play-Lightweight-Motorola/dp/B01I2ZJQTA
St.Noigel said:
He can't post links. ))
So you can just Google it.
I can do it for you.
https://www.amazon.com/SPARIN-Moto-Play-Lightweight-Motorola/dp/B01I2ZJQTA
Click to expand...
Click to collapse
I goolge it as well but wanted to be sure. Looks good, thx.
Question for owner(s) how does it fit without style shell?
One more question, any chance to fit style shell with wireless charging?
I bought this case
It works perfectly with mods. )
St.Noigel said:
I bought this case
It works perfectly with mods. )
Click to expand...
Click to collapse
I can find only metal one. What's the feeling when holding it? How does it fit? Does it protect of dropping the phone?
Zeljko1234 said:
I can find only metal one. What's the feeling when holding it? How does it fit? Does it protect of dropping the phone?
Click to expand...
Click to collapse
I feel just well when I use it with Incipio battery mod. It have some dropping protection but... I prefer don`t try it ))
How does it fit? I mean, phone is not moving inside?
Sent from my XT1635-02 using Tapatalk