cant get into recovery and download mode, what to do ?
You can try usb jig. Either buy one or make it yourself if you got spare micro usb plug. You would need to use wire cutters and 'open' a bit of that plug back to be able to use pins that are needed. Idea is to connect 300kOhm resistor (if i remember correct value) between 2 pins - I forgot which ones. Just google for usb jig and you will see DIY - even youtube links.
Sent from my SGS Adv. using xda-developers app.
any other idea ?
m1s3rys1gn4l said:
any other idea ?
Click to expand...
Click to collapse
If that does not work - service center.
At last i have done this with JIG
Sent from my NOKIA using Tapatalk
Related
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
dannghiem0801 said:
I got the same exact problem. It didn't seem to work at all.I think I'll have to order the adapter to see if the problem is the OTG cable or not
Click to expand...
Click to collapse
I ordered some cheap ones from DX, but since there are two of them and none of them works I'm assuming it's the Nook the problem is with.
BrotherZero said:
I downloaded Nook Tweeks, enabled USB host mode and External vBus, but nothing happens when I connect a USB-stick via a micro ubs to usb converter.
Am I supposed to do something else? Or does the USB-stick have to be in some special format?
Click to expand...
Click to collapse
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
bobtidey said:
It could be the USB-sticks are trying to draw too much power. The Nook host port will only supply low power USB devices (<100mA) and it is also best to have a fairly well charged battery. Some sticks work and others don't.
If you have a powered USB hub then this supplies the power so there is no problem. So try with a powered hub to at least see if that is the issue.
Click to expand...
Click to collapse
I used the same USB in this chart Nook Color USB HOST Device Compatibility List Sandisk Cruzer 8GB on CM7
I bought the Nook Color is to connect it to my camera via DSLRcontroller but so far still not successfully with USB stick.
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
I could never get usb host working on cm7. I have been trying to use RYC usb to control my Nikon Dslr . Once i switch over to CM9 beta it worked first time.
Sent from my Nook Color (CM9 ICS Beta)
Dj-Gutz said:
Read my thread , it should answer most if not all your questions
[23 Jan 2012][USER/DEV] USB Host Support & Development [CM7/CM9]
I'm hoping to get some free time and update it this weekend with more info and probably a widget
Click to expand...
Click to collapse
I have read this thread over and over again. Ill try to run CM9 soon to see if it works
Sent from my NookColor using Tapatalk
CM7 also shouldn't give you any trouble , as long as its FAT32 and you are using a hub
can you explain what exactly have you tried and provide logs?
I didnt use usb hub,just enable the usb host mode in Nook Tweak app and plug my usb via otg cable.
Sent from my MB508 using XDA App
Then you didn't read good enough the thread or the chart..
You need an external hub ( powered or non-powered ) to work with the sandisk cruzer.
Thanks a lot, i ll order one and try it out.
I tried to connect with my camera but nothing happened,I guess I have to try with usb hub as well
Sent from my MB508 using XDA App
How to connect usb pendrive to mini directly? I.e. Without a pc..
Can we actually make such a socket to connect pendrive?
Sent from my GT-S5570 using XDA
tejasghalsasi said:
How to connect usb pendrive to mini directly? I.e. Without a pc..
Can we actually make such a socket to connect pendrive?
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
I dnt think its possible. Mayb in future. but did u try connecting pendrive to our usb cable while its connected to our phone? It won't detect. So a pendrive with less power rating nd different software if made , can be used for mobiles.
No itz not possible now. :-( u cant use a pen drive directly into your SGM.
But definately, in future, this will be possible when pen drive technology improves
Dont forget to press the thanks button ;-)
Sent from my GT-S5570 using XDA
Maybe they'll make miniusb pendrives in the future, but for now you have to use the roundabout way.
possible
U need a usb host cable(otg).
http://en.wikipedia.org/wiki/USB_On-The-Go
and maybe even kernel support.
tejasghalsasi said:
How to connect usb pendrive to mini directly? I.e. Without a pc..
Can we actually make such a socket to connect pendrive?
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
you will need a cm9 or ics rom and a kernel which support USB host mode then buy an otg or micro USB to normal USB cable then connect you pendrive
hi
I was in CM7 and I couldn't transfer file by cable and USB Debugging not worked. sometimes phone in 88% .. 94% show me Charged!!!
and 1 h ago I just deiced to back to Samsung's ROM but in download mod phone not detect
I tried anouther cable (Nokia) but still not worked. and It'd not driver issue, I'm sure.
lsusb in linux didn't detect phone too.
I missed CWM Recovery.
any idea?
Vogie said:
any idea?
Click to expand...
Click to collapse
Yup, you need to use an original samsung USB cable, Nokia is not compatible...personally experienced this
xsenman said:
Yup, you need to use an original samsung USB cable, Nokia is not compatible...personally experienced this
Click to expand...
Click to collapse
The orginal cable not worked too.
maybe ma USB socket is failed.
Vogie said:
The orginal cable not worked too.
maybe ma USB socket is failed.
Click to expand...
Click to collapse
than you can examine it to see any damage or misaligned pins ( happened to another member some time back) or even clean the contacts with a brush and alcohol
Vogie said:
The orginal cable not worked too.
maybe ma USB socket is failed.
Click to expand...
Click to collapse
Did you download USB driver for SGS instead of using KIES?
I experience this too but it disappear after install driver. you can search and download it from google. just type "usb driver for samsung galaxy s"
Hope it helps.
coepeq said:
Did you download USB driver for SGS instead of using KIES?
I experience this too but it disappear after install driver. you can search and download it from google. just type "usb driver for samsung galaxy s"
Hope it helps.
Click to expand...
Click to collapse
USB not detect
I can't see device connected to usb port.
i think It's hardware issue.
xsenman said:
than you can examine it to see any damage or misaligned pins ( happened to another member some time back) or even clean the contacts with a brush and alcohol
Click to expand...
Click to collapse
I think I have to diassemble the phone.
It's last chance.
It was hardware issue.
I changed USB-Port and It's fixed
Hi Vogie,
I have the same issue with one of my SG-S.
I tried diferent cables and computer but no data connection. Power charge is ok.
As it fail in a pool and on a concrete ground ... USB port could be damaged ?
So where did you find the new USB port ?
Many thanks
I've got a Motorola Milestone with a broken USB Port, is it possible to get a custom ROM running ?
All Guides I found start with flashing via USB-Connection.
About Phone says: "Firmware-Version: 2.1-update1"
Regarding if you can flash it without the usb connection i don't know but are you sure that the usb connection on your phone are broken? Have you tried different cables, usb ports on the computer or even with another computer?
Sent from my Milestone using xda app-developers app
maango said:
are you sure that the usb connection on your phone are broken? Have you tried different cables, usb ports on the computer or even with another computer?
Click to expand...
Click to collapse
I bought it on ebay and in the description the broken USB was mentioned, but I hoped the previous owner just had some problems with his/her PC. But on my Laptop with my cable it says nothing, so it seems to be broken.
I guess there's no chance to get a new ROM running.
So now I try to buy another Milestone with a broken display or something else that makes it cheap, because It seems the motherboard with the USB-port is one of the first things when you disassemble it, so it should be easy to change.
Does the USB port have any other function other than power?
Don't think so, only power AFAIK.
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
UPDATE: The USB cable that comes with it may not work for data transfer, tried it with my phone and it didn't work. So I tried a normal microUSB cable but still nothing.
spunker88 said:
I plugged it into my computer and even tried pressing and pressing/holding the button on the Chromecast but my computer didn't indicate any hardware plugged in.
I wonder if the data pins are even wired to anything internally.
Click to expand...
Click to collapse
If we could plug a mouse or keyboard into it would be great!!
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
It has bluetooth... so in theory that could be a simple alternative... we just need to figure out how to access hidden menus.
comatose1978 said:
If we could plug a mouse or keyboard into it would be great!!
Click to expand...
Click to collapse
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Universal Charger
Universal Charger:victory:
Examining board
Based on examining the photos of the motherboard on ifixit.com...
Component EM1 appears to be a USB Common Mode Choke. That goes on the D+/D- pair which you can see routed from the USB port, so it wouldn't be present if there wasn't some use for data communication over the USB port. (Cost sensitive equipment.) The flip side of the PCBA shows TP1-TP20 (Where TP19 and TP20 appear to be GND). My guess is in that mix you have a JTAG port for programming/testing the unit initially with a pogo pin rig (evidenced by the dimples observed in each of those locations), and there might be more high/low GPIO pins where one might allow the unit to enter its USB data mode.
-Jon
ften said:
I tried this with a self powered USB OTG cable, just to see if the Chromecast would blink, bing, or do anything to show recognition, no dice. Also tried booting with a USB drive in, no difference.
Click to expand...
Click to collapse
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
mustang_52 said:
Is there any special kind of powered otg cable to work with this? I looked on Amazon but not sure. I want to grab one incase they make any progress on rooting this.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
OneAn9ryN00b said:
Looks like its already been rooted. With what looks like a dual usb otg. They don't go deep into what specific cable but, I would guess it is a generic dual usb one off ebay, or amazon, heres a quick one i pulled from amazon http://www.amazon.com/Micro-Cable-P...8&qid=1375052489&sr=8-3&keywords=Dual+Usb+otg
But if you read into it, they say you can root, but unless your a developer you probably wont get any benefit of rooting....yet, if at all.
Obtaining root Link: http://blog.gtvhacker.com/2013/chromecast-exploiting-the-newest-device-by-google/
Click to expand...
Click to collapse
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
This cable wouldnt work, right? http://www.ebay.com/itm/Usb-type-A-..._USB_Cables_Hubs_Adapters&hash=item4857e3608e
Click to expand...
Click to collapse
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
spunker88 said:
I own that cable from Amazon and it should work. It brings in +5v from a charger connected to the female microUSB port and then splits it to the female full size USB port and the the male microUSB port so both the USB host device and the USB peripheral device are getting power.
Click to expand...
Click to collapse
I ordered this cable http://r.ebay.com/QgwBIW Will report back if it works when I get it.
eurominican said:
Please correct me if Im wrong, but the cable you linked only charges the thumbdrive/keyboard/mice/etc NOT the Chromecast so how would one root it since it does need power from usb plug? I've been searching for correct cable and cant find it; link to correct cable would be greatly appreciated!!!
Click to expand...
Click to collapse
I also bought that powered OTG cable off Amazon and it will power the Chromecast as well as provide the means to flash the Chromecast via a USB thumbdrive. When you apply power to the Chromecast, it automatically flashed the bin from the USB drive. There was no interaction required (or even possible). Of course this was on the original firmware - if your Chromecast updated itself, you have lost the ability to root the device at this time.
Clearly the Chromecast does sense the USB drive and pulls data from it during the initial boot sequence. However I'm not sure if it would ever work for other devices such as keyboards or storage devices, etc.
I'm not sure why anyone would want to hook those types of devices up to the Chromecast however. Once you have root, you can telnet into the device, so adding a keyboard doesn't seem that important. The whole idea of the device is that you send it media from other devices and control it via that other device. Adding storage for example doesn't seem important since it can pull media off the network already (ie a NAS or another computer).
Anyway. That has been my experience with it so far. It's a long winded answer to more than just your question about the OTG plug.
I would personally love the ability to send audio out without having an hdmi TV be on through the usb somehow...
Sent from my Nexus 7 using Tapatalk 4
USB Tethering not working - SGH-i997
Hi all,
i have install Avatar 7.0 to my Samsung SGH-i997 from "http://forum.xda-developers.com/showthread.php?t=2174227". it's look cool.
But when i am trying to USB Tethering, the massage shows as "Unfortunately,Setting has Stopped".
how to Fix this issue.