Hi, my phone was lagging so I've tried to upgrade firmware. However, it won't turn on after status "rebooting". When I plug in the charger, it won't charge too. Help me. What can I do.
amy_nas said:
Hi, my phone was lagging so I've tried to upgrade firmware. However, it won't turn on after status "rebooting". When I plug in the charger, it won't charge too. Help me. What can I do.
Click to expand...
Click to collapse
What version of I9070 you have?
If you have I9070, and you upgrated with I9070P firmware or if you have I9070P and you updated with I9070 - you hardbricked phone.
Can you go to recovery mode? If you can, do factory reset (in case you did not replace versions of firmware, and phone is not hardbricked).
Can u specify what model,rom,android version?
Sent from my GT-I9070 using Tapatalk
Without version info . no one can help u mate . plz provide that
Sent from my GT-I9070 using XDA Premium 4 mobile app
har****andro said:
Without version info . no one can help u mate . plz provide that
Sent from my GT-I9070 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ladynafsy said:
Can u specify what model,rom,android version?
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
shut_down said:
What version of I9070 you have?
If you have I9070, and you upgrated with I9070P firmware or if you have I9070P and you updated with I9070 - you hardbricked phone.
Can you go to recovery mode? If you can, do factory reset (in case you did not replace versions of firmware, and phone is not hardbricked).
Click to expand...
Click to collapse
I can't go to recovery mod. My model is I9070, stock ROM and ginggerbread( I don't really remember the version). Well, I think I flashed the wrong firmware and brick it. It won't turn on and even I plugged in the charger it won't charge. I've read some forums that we can recover using USB JIG but I don't know a damn thing about it.
amy_nas said:
I can't go to recovery mod. My model is I9070, stock ROM and ginggerbread( I don't really remember the version). Well, I think I flashed the wrong firmware and brick it. It won't turn on and even I plugged in the charger it won't charge. I've read some forums that we can recover using USB JIG but I don't know a damn thing about it.
Click to expand...
Click to collapse
What is the name of firmware you used now? You have it in file name.
shut_down said:
What version of I9070 you have?
If you have I9070, and you upgrated with I9070P firmware or if you have I9070P and you updated with I9070 - you hardbricked phone.
Can you go to recovery mode? If you can, do factory reset (in case you did not replace versions of firmware, and phone is not hardbricked).
Click to expand...
Click to collapse
I did try the 3 combination button to go into recovery but it doesn't work.
amy_nas said:
I did try the 3 combination button to go into recovery but it doesn't work.
Click to expand...
Click to collapse
Give it one more try with Download mode. 3 buttons, now use volume down.
shut_down said:
Give it one more try with Download mode. 3 buttons, now use volume down.
Click to expand...
Click to collapse
just the same.. really appreciate.. I think I'll just send it to 'hospital'.
amy_nas said:
I can't go to recovery mod. My model is I9070, stock ROM and ginggerbread( I don't really remember the version). Well, I think I flashed the wrong firmware and brick it. It won't turn on and even I plugged in the charger it won't charge. I've read some forums that we can recover using USB JIG but I don't know a damn thing about it.
Click to expand...
Click to collapse
I am not sure what u did. U can flash back to original rom by using odin. Try seach the forum for odin and flash back ur rom. There is a guide there. - if u mean hospital is the warranty center i think u just broke ur warranty.
Sent from my GT-I9070 using Tapatalk
ladynafsy said:
I am not sure what u did. U can flash back to original rom by using odin. Try seach the forum for odin and flash back ur rom. There is a guide there. - if u mean hospital is the warranty center i think u just broke ur warranty.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I am affraid that he can't do that... If you flash firmware of P phone on NON P - you hardbrick phone...
He can't use Odin, because he can't go to download mode.
Yup been thinking if he cant go to download mode or recovery mode is quite troublesome.....
Just curiosity, how did u flash ur firmware? Step by step? Where did u find the source to flash ur phone?
Sent from my GT-I9070 using Tapatalk
Related
I got problem with galaxy tab after flashing new rom (may be not suitabe for my device p1000) the sceen come black the flash led on all the time & the device not working at all . anyone can help me to resuscitate my galaxy tab GT-P1000
Maybe giving more info would help us to help you.
What was your firmware?
Which firmware you are trying to flash?
Are you using Odin? Heimdall ?
Etc etc.
Sent from my GT-I9000 using XDA App
You should give us more info, as stated above. However, you've already tried reflashing, haven't you?
Sent from my GT-P1000 using XDA Premium App
hi
my old firmware p1000jpjm5 the new one tried to flash XXJVB 2.2.3
useing odin3 1.7 after flashing this rom my galaxy turne on black screen
and flash light on thanks.
Been reading around and the only thing i found on your problem was caused by flashing the galaxy tab with galaxy s software
It should restore in download mode using the right flash for your tab
same problem, any solution ?
What problem r u having? If u have the same problem with OP please provide more info like 2nd post..u could try overcome method to restock your tab
Sent from my GT-P1000 using xda premium
dorsumsallae said:
What problem r u having? If u have the same problem with OP please provide more info like 2nd post..u could try overcome method to restock your tab
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
after i flashed my p1000 with GB-Stock-Safe-v5.zip etc just like the tutorial, my phone just blank n the flash light automaticly on if i power it on or i plug the usb cable, but it doesn't connect with the odin, i already download GalaxyTabP1000-JQ1-One-Click ( heimal ) but same problem , it doesnt connect with the software, any solution? or the battery empty? i already remove the battery n charge it with desktop charger, but still same...
are you 100% sure you own a P1000 and not a P1000N or P1000L ?
was the Odin flash 100% successful
The symptom is exactly like a N/L version flashed with a P1000 firmware.
Edit: when you say flash light, it is the capacitive buttons or really the LED flash light near the rear camera?
priyana said:
are you 100% sure you own a P1000 and not a P1000N or P1000L ?
was the Odin flash 100% successful
The symptom is exactly like a N/L version flashed with a P1000 firmware.
Edit: when you say flash light, it is the capacitive buttons or really the LED flash light near the rear camera?
Click to expand...
Click to collapse
how can i make sure mine is p1000 not n / l , n if i flashed wrong firmware what is the solution?
Not sure how to check, the back of the device didn't say so? You need to find the right firmware, it is available on sammobiles website.
Hey, you said you remove the battery and charged it with desktop charger?
What kind of charger is that?
Sent from my GT-I9300 using xda app-developers app
priyana said:
Not sure how to check, the back of the device didn't say so? You need to find the right firmware, it is available on sammobiles website.
Hey, you said you remove the battery and charged it with desktop charger?
What kind of charger is that?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
nothing displayed on the backside of device , so, how can i know? then , what should i do?
yea.. desktop charger .. like this
The original is rated 2A.
Maybe you should charge your longer, 8hr or more, then try Odin again.
BTW, if L/N device flashed with P1000 you can still use its recovery.
So if Odin can detect, reflash the GB stock safe, make sure it is completed.
Then flash overcome kernel,
Then use its cwm recovery to flash cm for p1n.
You sure back bottom no marking?
Mine is T849 and it says so there.
Sent from my GT-P1000 using xda app-developers app
Model no. Should be bottom back of your tab..for me it gt-p1000..try what priyana said coz if it N/L model i cant help much maybe priyana can guide u better..
Sent from my GT-P1000 using xda premium
priyana said:
The original is rated 2A.
Maybe you should charge your longer, 8hr or more, then try Odin again.
BTW, if L/N device flashed with P1000 you can still use its recovery.
So if Odin can detect, reflash the GB stock safe, make sure it is completed.
Then flash overcome kernel,
Then use its cwm recovery to flash cm for p1n.
You sure back bottom no marking?
Mine is T849 and it says so there.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
yeah.. nothing displayed, okay,, i'll try it again, is the gb stock safe can be used for all type? ( L / N / P1000 )
btw, my tab is anycall , do u know which one is it?
dorsumsallae said:
Model no. Should be bottom back of your tab..for me it gt-p1000..try what priyana said coz if it N/L model i cant help much maybe priyana can guide u better..
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
model number? can we detect it with model no. ?
Never had experience with anycall. It is a Korean one, some has posted here before. Never seen any confirmation which one it most resembles.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Never had experience with anycall. It is a Korean one, some has posted here before. Never seen any confirmation which one it most resembles.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
hey,, right now, the condition of my tab is the device connected with the computer, then i flashed with another stock firmware, then the tab still won't boot, but connect with the odin , any solution? or i try the method that using gb stock again?
bagir88 said:
hey,, right now, the condition of my tab is the device connected with the computer, then i flashed with another stock firmware, then the tab still won't boot, but connect with the odin , any solution? or i try the method that using gb stock again?
Click to expand...
Click to collapse
Hello guys, thanks for your support and excuse me for my english but i'm the same problem with my GT-P1000(i've seen it on the back of my tab !). I've let it charging several hours and try to connect it to Odin which doesn't recognize it ! I got always a black screen and the rear flash led flashing flashing and flashing when it's connected to charger or my PC or when i keep pushing the power button ! Before the brick state i've follow the bad tutorial to root my tab and i've flashed a firmware for galaxy tab 10.1 inch ! Please, help me !:crying:
My gt p1000 went dead with led light permanetly on afrer flashing with odin
Here are my detail.
Odin v1.83
firmware P1000XWJQ8_P1000PHNJQ1_P1000XXJPZ_HOME.tar
pit :gt-p1000_mr
When i first root,its doing bootlloop but i can still enter downloading mode so I decide to flash the rom as advice by one tutorial.so i got stuck with this ,that is the tab went dead and the flash led light permanetly on.
please i need help.
Thanks in advance
Kingdavid423
KINGDAVID423 said:
Here are my detail.
Odin v1.83
firmware P1000XWJQ8_P1000PHNJQ1_P1000XXJPZ_HOME.tar
pit :gt-p1000_mr
When i first root,its doing bootlloop but i can still enter downloading mode so I decide to flash the rom as advice by one tutorial.so i got stuck with this ,that is the tab went dead and the flash led light permanetly on.
please i need help.
Thanks in advance
Kingdavid423
Click to expand...
Click to collapse
Restock gb-v5 first using odin or heimdall. Try installing cm10.1 or cm10.2 rom instead.
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
minnieman said:
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
Click to expand...
Click to collapse
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
minnieman said:
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
Click to expand...
Click to collapse
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
You said your note came from repair and it was on download mode. I think it was NOT REPAIRED AT ALL. Country or region has nothing to do with manual flashing. You only need region when using kies to update.
Sent from my GT-N7000 using xda app-developers app
minnieman said:
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
Click to expand...
Click to collapse
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
sahilarora2003 said:
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
minnieman said:
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
Click to expand...
Click to collapse
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
---------- Post added at 01:22 AM ---------- Previous post was at 12:40 AM ----------
GeoJam3s said:
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
Click to expand...
Click to collapse
Never mind... I got it. I had to update only via Kies. And then from there it pushed my original software. Thanks!
Stuck on Splash Screen. No recovery. Odin not able to flash roms.
sahilarora2003 said:
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed by with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding. Even I reset tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1 and status modified.
I can goto download and recovery mode. Please advice!
Click to expand...
Click to collapse
torch screen? or you mean touch screen?
iamnoo said:
torch screen? or you mean touch screen?
Click to expand...
Click to collapse
Yes, no responsed, press power button and I can't off it. Removed battery to off. Look like the digitizer was faulty. Due to flash counter = 1 and void the warranty.
Sent from my GT-P5100 using xda premium
After factory reset, I have the bootup screen as shown, , all button on screen were no responded. Please advice. Before upgraded to mb3 firmware, everything was working.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
Click to expand...
Click to collapse
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Edit: kies updated to latest, some result.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
djembey said:
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
I don't think there is any Non-Touch version of TA.... unlucky
Edited:
since your phone is running stock ROM&kernel you can try USB jig, that's the Only thing left to try to get back your warranty. In my case jig won't reset counter but I'm using Custom ROM .... Can't remember how was it on stock. TA works for sure but must be installed first, you can't use your screen so jig is your last chance. ..
Sent from my GT-I9305 using xda app-developers app
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Raistlin1158 said:
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Click to expand...
Click to collapse
Downloaded bma6 pre rooted, no changed in flash counter on download mode. Still 1. Thank for all the suggestion. Cashed closed.
Sent from my GT-P5100 using xda premium
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Raistlin1158 said:
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Click to expand...
Click to collapse
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Usb jig not worked for I9305, counter remain 1. It worked great for I9100.
Sent from my GT-P5100 using xda premium
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
ausdim said:
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
Click to expand...
Click to collapse
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
jetbruceli said:
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
In singapore samsung services was the best compared to other brand, nokie sonyErison no good. That why I stick to Samsung phone. The next was S3 lte for me. The phone on this thread was belong to friend.
Sent from my GT-P5100 using Tapatalk 2
timberwolf60 said:
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
how did u get TA work with urs no respond touch screen????
Hi guys. I tried to root my galaxy s gt-9000 and i forgot that i had take out the sd card.The phone is totally dead. I found the jig method and i bought a jig usb but my phone is still dead?Do you have any ideas what the problem is?(except my stupidity).
Thank you in advance
I rooted my phone yesterday even with SD Card is in , but it worked , no problem at all
what Firmware did you used and what root file name ?
The Tox said:
I rooted my phone yesterday even with SD Card is in , but it worked , no problem at all
what Firmware did you used and what root file name ?
Click to expand...
Click to collapse
ICS_4.0.3_MR1-RC4.2_I9000 is the rom.I have allready installed it succesfully in an other galaxy s gt-i9000 and its fast smooth and stable.I am not an expert but i think that maybe because i tried to root it without sd card?anyway thank you for your fast reply.
spyranpap said:
ICS_4.0.3_MR1-RC4.2_I9000 is the rom.I have allready installed it succesfully in an other galaxy s gt-i9000 and its fast smooth and stable.I am not an expert but i think that maybe because i tried to root it without sd card?anyway thank you for your fast reply.
Click to expand...
Click to collapse
nope, extsd not included in flashing steps, first, make sure ur fone is i9000 first (i know its a lame question but make sure first). n charge ur battery fully before flashing method)
n what method u use to root it?
Sent from my GT-I9000 using xda premium
compacity said:
nope, extsd not included in flashing steps, first, make sure ur fone is i9000 first (i know its a lame question but make sure first). n charge ur battery fully before flashing method)
n what method u use to root it?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yes it is i-9000(there are no lame questions mate ).I tried it with odin 1.85 I will try a new battery.Otherwise i really dont know.I was hoping for the jig usb but unfortunately.. thank you for your time and if you have any possible solution to suggest me dont hesitate.i will try anything:good:
spyranpap said:
yes it is i-9000(there are no lame questions mate ).I tried it with odin 1.85 I will try a new battery.Otherwise i really dont know.I was hoping for the jig usb but unfortunately.. thank you for your time and if you have any possible solution to suggest me dont hesitate.i will try anything:good:
Click to expand...
Click to collapse
u need to do jig?da fone really dead? i never heard such case rooting makes ur fone totally dead, i think u can do download mode by 3 combo button (home + voldown+power).if really juz root u do before its totally dead then there must be hardware faulty.
n there is UNBRICKABLE MOD for i9000, but slightly difficult to do.
Sent from my GT-I9000 using xda premium
Phone is completely dead. It doesn't even charging. No download mode neither recivery. Thats why I bought a jig usb but even with that is dead.
Sent from my GT-I9300 using xda app-developers app
I'm not sure where to post this but my gear keeps saying no OS. I think I wiped it all out when I tried to reset it. Plz help. I'm not sure what to do. I have a 300 dllr paper weight now.
Put it in download mode and install a stock rom via odin .
Sent from my GT-I9505 using XDA Premium 4 mobile app
BRRRZ said:
Put it in download mode and install a stock rom via odin .
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So I didn't kill it? Dumb question but where can i find stock rom and also odin. Sorry but I'm new to this. Thanx for the help.
jaggedx2 said:
So I didn't kill it? Dumb question but where can i find stock rom and also odin. Sorry but I'm new to this. Thanx for the help.
Click to expand...
Click to collapse
there is a thread there that is stickied that lists stock roms. XAR is for the USA. And no your Gear will be just fine after a reflash.
jaggedx2 said:
I'm not sure where to post this but my gear keeps saying no OS. I think I wiped it all out when I tried to reset it. Plz help. I'm not sure what to do. I have a 300 dllr paper weight now.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2463743
[18.11] SM-V700 (Galaxy Gear) STOCK ROMS COLLECTION (Newest: V700XXUAMK7)
Sent from my SM-N900T using Tapatalk
JT man said:
http://forum.xda-developers.com/showthread.php?t=2463743
[18.11] SM-V700 (Galaxy Gear) STOCK ROMS COLLECTION (Newest: V700XXUAMK7)
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I downloaded files....thank you. Now my problem is that odin doesnt recognize my gear. Nothing comes up in the com box. Would u you happen to know what I need to do? I cant getcto settings bcuz my gearcis either on the start up gear screen or if I try to reboot and exit, it only says no OS. Plz help.
jaggedx2 said:
I downloaded files....thank you. Now my problem is that odin doesnt recognize my gear. Nothing comes up in the com box. Would u you happen to know what I need to do? I cant getcto settings bcuz my gearcis either on the start up gear screen or if I try to reboot and exit, it only says no OS. Plz help.
Click to expand...
Click to collapse
Unplug your gear, reboot your computer, plug in the usb into a different usb if possible, (Dont use a usb hub) open odin, then plugin your gear
jaggedx2 said:
I downloaded files....thank you. Now my problem is that odin doesnt recognize my gear. Nothing comes up in the com box. Would u you happen to know what I need to do? I cant getcto settings bcuz my gearcis either on the start up gear screen or if I try to reboot and exit, it only says no OS. Plz help.
Click to expand...
Click to collapse
I don't know but when in custom recovery reboot in download mode, that's where you need to be in ,in order to flash stock
Sent from my SM-N900T using Tapatalk