Related
minusculeShield 1.0
So after some time, I decided that the 4.3 update is worth doing slight modifications, even without the native Shield Services and PC Streaming able to be done remotely. I have gotten used to using Limelight anyways, so I decided to update my basic modified stock Shield ROM
First, I updated to the latest OTA 68, then went from there, the features are as follows:
- Two versions of the ROM, one with OTA and one without
- Includes a alternative Calculator (RealCalc), Zeam Launcher, Adblock, Xposed Framework (Along with an Xposed Module for adding a Play Store link to App info, and GravityBox for various system tweaks), MX Player, and ES File Explorer
- All but the most essential "system" apps are removed
- All "Gapps" are using Slimroms 4.3 Minimal Gapps
- Koush's Superuser/Superuser Binaries pre-installed
Same installation process as 0.5, excluding need to select Advanced Restore, you can restore like a normal Nandroid without specifying partitions
As always, make sure you wipe System, Data, Cache, and Dalvik before installing
If you have problems with the OTA-exempt version trying to OTA, if it prompts you, it will do it once, and once you "apply" the update (which it will never actually apply) the notification will go away
minusculeShield 0.5[Nandroid-Backup]
So, this is not really a ROM, but a Nandroid backup of my system without any partition but "/system."
This is almost as stripped down as the stock Shield ROM you can get. I have removed all but literally the most essential apps, and also removed the OTA functionality.
The idea for making this was that I couldn't stream remotely anymore since OTA 63, which I promptly set out to fix. I soon realized it was a problem with the Android side of things, as using it on 4.1.2 or 4.2.2 with their respective apps for that release seemed to work fine. OTA 63 (and 64, which is basically the same release, just for those who couldn't install 63) made the local streaming much less productive, as I immediately noticed lagspikes and a load of other problems, which I had never encountered before.
So, in a basic sense, this backup after installed, keeps the ability to stream remotely without troubles of performance or re-connection problems, uses a much more lightweight version of Gapps (Slimrom's version to be exact). It is based on agrabren's TweakerROM 1.1.0, which is a 4.2.2 base, and uses the original TegraZone Dashboard. It again removes OTA, so updating is not an option.
So, when you do install this backup, your internal "/sdcard" storage should no longer need the "nvidia" and "shield" folder, and you can delete those. They will most likely be recreated by some Shield services.
So on to installing and basic rundown in-case you past the above message and just want a bulleted list:
Installation:
Assumes the following:
1. Unlocked Bootloader
2. CWM installed
Installation procedure:
1. Download attached ZIP, extract to your internal SD card ("/sdcard") using the folder structure of "/sdcard/clockworkmod/backup/<extract contents of ZIP here>"
2. Boot into CWM and select backup and restore
3. Choose advanced restore
4. Choose minisculeShield, then "system"
5. Factory reset, wipe cache, data, and dalvik
6. Reboot and enjoy
Information on changes to original 4.2.2 ROM and other info:
- Removes OTA system
- Improves performance of streaming using original Dashboard, Shield Services, and Shield PC Streaming applications
- All but the most essential "system" apps are removed
- All "Gapps" are using Slimroms 4.2.2 Build 8 version
- Koush's Superuser/Superuser Binaries pre-installed
Download:
Version 0.5
Version 1.0 (OTA Enabled)
Version 1.0 (OTA Removed)
This is great. Will give this a shot today or tomorrow. Thanks!
themichael said:
This is great. Will give this a shot today or tomorrow. Thanks!
Click to expand...
Click to collapse
I'm glad, I thought people would be trampling each other to get a hold of some sort of fix to the remote streaming issue. I guess not. I know I was SUPER disappointed by the latest update for that exact reason.
Let me know if you have any problems, questions, or concerns. I am very new here, but I have been working with Android for almost as long as it came into existence. I started with Android 2.1, so I have learned a lot. I'm also a Unix (mainly the Linux variety) guy, so that goes hand in hand with Android.
I still get notification prompts for ota.
themichael said:
I still get notification prompts for ota.
Click to expand...
Click to collapse
This prompt is a one-time thing, if you attempt the install it will fail and never prompt again. I attribute this to a probably data not being cleared for the actual OTA I removed before doing the Nandroid, but I assure you, I have never gotten it again, and never had to install it past that. Basically, if you attempt the install, it will not restart, but rather just disappear, and even upon restart will just boot normally. Let me know if you've tried that what happens, as I still am using this Nandroid, and since I did indeed attempt (and fail) installing that OTA, it has never prompted again, and stayed where it was during Nandroid in terms of system apps and such
jarjarfinks said:
This prompt is a one-time thing, if you attempt the install it will fail and never prompt again. I attribute this to a probably data not being cleared for the actual OTA I removed before doing the Nandroid, but I assure you, I have never gotten it again, and never had to install it past that. Basically, if you attempt the install, it will not restart, but rather just disappear, and even upon restart will just boot normally. Let me know if you've tried that what happens, as I still am using this Nandroid, and since I did indeed attempt (and fail) installing that OTA, it has never prompted again, and stayed where it was during Nandroid in terms of system apps and such
Click to expand...
Click to collapse
Seemed to work. I'll let you know if anything changes.
same here , ive been on the evo 3d for a long time and learned alot , ill keep you posted as much as i can
milk070 said:
same here , ive been on the evo 3d for a long time and learned alot , ill keep you posted as much as i can
Click to expand...
Click to collapse
Is it me, or does the new GFE render the PC running it as "Busy" regardless of the version of the Android side? It was working prior to the GFE update 1.7.1.0, I just had to use the version of the PC Streaming, Dashboard, and Nvidia Shield Services apps in this Nandroid. It seems Nvidia has found a way to render it "Busy" the same problem I had before, no matter what ROM you use
Please test, and let me know, as I will have to find another way
Will cyanogenmod 13 come to the kindle fire hd 7 (Tate)?
Yep, @BuQQzz and I (mostly him, haha) are working on porting CM13 to this device, as well as the 8.9" (jem). I'm not exactly sure when a usable build will be uploaded, but it should be in the not-so-distant future.
I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.
Jaybone073 said:
I'm running 12.1 on mine and even though the rom is very lean the Kindle is always running slow. I have 2 questions concerning this. One, based on what you're seeing so far during development, is the rom running at a better speed?
Two, what steps can I take to make sure I am running the best I can for the best results?
The system was wiped completely. I did a super clean install, I've made a backup and moved it to my desktop (in case I need to push it), and I usually only do an update about once every two weeks. Mainly due to the fact that I have to jump through all the hoops of reinstalling Google Play Services, Google games, and the SuperSU beta.
If there are other things you think may help please give suggestions and advice. I can add external storage, however at the moment I do not have an SD card in the slot. To me since storage and RAM are two different things I am thinking it would make little difference to add external storage since I have very few apps downloaded on it.
Click to expand...
Click to collapse
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.
monster1612 said:
1) The ROM currently doesn't even boot up at this point. It's an issue with SELinux that we're working to resolve.
2) I would suggest that you avoid having too many apps on the device - doing so tends to make app optimization take longer (which usually occurs after an OTA or a manual cache wipe). Also, try not to have too many xposed modules or other android mods on your device - if modules or frameworks conflict with each other or the base system, system stability and speed can be negatively impacted. As for the issues with having to reflash gapps, xposed, etc. after an OTA, I use CM Downloader (which is available on the Play Store) to automatically handle flashing other zips after the CM base ROM.
You're right - storage and RAM are two different things. Unless you're low on storage and/or need to share files between multiple devices, I wouldn't see a need for an SD card. Also, I'm fairly certain that the 2012 HD 7" (tate) doesn't have an SD card slot (are you using a 5th generation device?). This discussion is for the 2012 HD 7" models, not for other (or later) models; flashing a ROM meant for another device can and most likely will brick your kindle.
Click to expand...
Click to collapse
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.
Jaybone073 said:
I stand corrected. There is no external slot. I was mistaking the back logo panel as a possible external storage cover. My son has had the device for quite some time and he asked dad (me) to give it the "works". The device was running atrocious and much slower than it does now. I've had it for about 2 months and after installing the 2nd bootloader, rooting, twrp recovery..... You get the idea, I had it very stable and clean. It's been running quite well on 12.1 and I am pleased to see development still happening for such an older device.
As far as apps go, I have only installed what he likes. A few games (about 4) and a couple of social ones like Instagram and facebook for him. The real slowdown was actually with Facebook continually not updating and having errors. A recent reboot has fixed that. It also appears that the occasional reboot is actually helping the rom settle in.
I had previously tried the CyanDelta Updater on the play store and it didn't work well. I will now give CM Downloader a try to see of that keeps me from having to reflash the GApps and other apk that seem to force close that I had previously mentioned.
Thanks for the quick response and advice.
Click to expand...
Click to collapse
If you go into the CM Downloader app settings, you should be able to add in the zips (maximum of 6) you want flashed after a ROM update. Once that's complete, all you need to do is download an update and initialize the install process from within the app, and it'll handle flashing the zips. From personal experience on CM nightlies for jem (the 8.9" version), I tend to see stability break down after about 24 hours of device uptime without a reboot, so reboots do help significantly.
Any progress so far?
Pix12 said:
Any progress so far?
Click to expand...
Click to collapse
Currently, the generated zips take longer than cm12.1 to flash (but they still flash successfully). As for a functional ROM, that hasn't happened yet - it refuses to boot after about 5 seconds. last_kmsg says it's an SELinux issue.
Dear forum,
Long time no talk! I have been able to get "root" for our phones on G925VVRU4BOG7, which anyone can downgrade to. The catch is that even with /system mounted as rw, I am unable to write to it directly through most conventional means. (I can write to /data, though, which means i can patch dalvik-cache, which means my mods are coming ) However, I am able to still write to it using another, more complicated way (I can go into more detail for those interested), as a whole. Here's where you come in-- is anyone still full-rooted? If so, please message me as soon as possible! I may be able to have users who are on newer builds downgrade to older builds and get su properly installed, then manually upgrade back up to the later builds again!
If you are rooted still, all i'm going to have you do is perform this command:
Code:
su
dd if=/dev/block/platform/15570000.ufs/by-name/SYSTEM bs=4096 of=/sdcard/system.img
Then send me that system.img file on your sdcard! It'll be pretty big, so you can zip it or .7z (7-zip), whatever you'd like to do.
I will also need what build you are on. You can just send me your Build number within "Settings->About phone".
First one who does it gets credits on the official release thread i'll make, when I get a procedure down that people can follow!
Thanks!
-Trailblazer101
i have an s6 edge on 5.0.2 rooted. Would that be of help?
Did you get the system.img file? I really wish I could help you. I have this phone on 6.0.1 and stuck without root, but the thing is I really need the root because I bought it used, worked fine the first few days, then didn't get any signal (turns out that it was reported as stolen and of course the IMEI got blacklisted; I tried to contact the seller but he was gone, and his ebay account deleted, so basicly I'm stucked with a ' 5.1" tablet' . I got scammed :/ )
I would be very grateful if you could explain how did you get root on G925VVRU4BOG7 . I know that you want the file mentioned for creating some kind of universal root for the phone, but right now I'm kind of desperate and need root as soon as possible to fix my IMEI issue and I would follow your steps if you made a tutorial.
Thank you very much!
trailblazer101 said:
Dear forum,
Long time no talk! I have been able to get "root" for our phones on G925VVRU4BOG7, which anyone can downgrade to. The catch is that even with /system mounted as rw, I am unable to write to it directly through most conventional means. (I can write to /data, though, which means i can patch dalvik-cache, which means my mods are coming ) However, I am able to still write to it using another, more complicated way (I can go into more detail for those interested), as a whole. Here's where you come in-- is anyone still full-rooted? If so, please message me as soon as possible! I may be able to have users who are on newer builds downgrade to older builds and get su properly installed, then manually upgrade back up to the later builds again!
If you are rooted still, all i'm going to have you do is perform this command:
Code:
su
dd if=/dev/block/platform/15570000.ufs/by-name/SYSTEM bs=4096 of=/sdcard/system.img
Then send me that system.img file on your sdcard! It'll be pretty big, so you can zip it or .7z (7-zip), whatever you'd like to do.
I will also need what build you are on. You can just send me your Build number within "Settings->About phone".
First one who does it gets credits on the official release thread i'll make, when I get a procedure down that people can follow!
Thanks!
-Trailblazer101
Click to expand...
Click to collapse
I am currently running on A0E2 using your rooted rom for this phone. It runs great....except I tried flashing xposed framework using Flashfire and it of course failed...due to the fact that xposed only works on 5.1.1 or above...sucks we are in such a catch 22 with our devices...although I'm happy because I am still rooted.. Anyway...I set up ADB and entered that command you posted and it worked...I just don't know where the storage location of the system.img file is for me to transfer to my PC, 7zip, and send to you. Any help would be excellent....as I desperately want to run xposed framework on my device....but am stuck on 5.0.2
r0ckinb0i said:
I am currently running on A0E2 using your rooted rom for this phone. It runs great....except I tried flashing xposed framework using Flashfire and it of course failed...due to the fact that xposed only works on 5.1.1 or above...sucks we are in such a catch 22 with our devices...although I'm happy because I am still rooted.. Anyway...I set up ADB and entered that command you posted and it worked...I just don't know where the storage location of the system.img file is for me to transfer to my PC, 7zip, and send to you. Any help would be excellent....as I desperately want to run xposed framework on my device....but am stuck on 5.0.2
Click to expand...
Click to collapse
Looking at the last part of the command and if it ran successfully, it should be in /sdcard. Did you ever find it?
gabes100 said:
Looking at the last part of the command and if it ran successfully, it should be in /sdcard. Did you ever find it?
Click to expand...
Click to collapse
Thank you I found it...I'm new to command prompt although I am learning quickly. I found it. I just need to load it onto my computer and compress it so I can send it to Trailblazer. I will do that tomorrow night when I get back home.
I have the img on my computer. It is 4.3G. How do I get it to Trailblazer? Google Drive? EDIT: it is 4.58GB. I am uploading now to google drive, it will an hour
Hi Trailblazer,
Here is a link to system.img:
https :// drive google com / open?id=0B-j3XfGrnj9PbUdwaml5eERvbFU
I am too new to post links the correct way.
Are there any updates on this topic? When I first saw this thread last week, It got me thinking about what a Tethered Root (Temporary/Semi - Root) would still be capable of doing for those of us still on Official Firmware in this day and age.
And really it occurred to me at that moment, that if we could just attain a Root Shell even if it was only for 60 seconds to five minutes, that would be sufficient to get enough root information off of the phone and into a PC editable format.
I ask, because I am in the process of forming a method for the G925V 6.0.1 [PI2] Build. The problem I'm pretty sure I'm going to run into sooner or later in my experiments/research, is the fact that I am one of the few who have the 64GB Verizon S6 Edge. Technically speaking, my device refers to itself in Download/ODIN mode as a SM-G925VZKE model. This also means that my Stock .PIT file is going to be very different than most people's, also meaning my FSTAB configuration probably will be different.
Because there shouldn't be a reason I can't at least get a temporary Root Shell very soon.
So whats up with this? My wife has 6.0.1 on Verizon and I have international much better choice. Will we have root on this phone?
If you are currently on 6.0.1 on your Verizon device. It would serve you well for the time being to disable Automatic Security Updates.
Settings > Lock Screen and Security > Other Security Settings > Security Policy Updates
Turn OFF Automatic Updates, and Turn OFF Wi-Fi Only.
If you leave these on, any potential root option will be patched by Samsung/Google before you know it exists. Disable it for now so you can find an exploit for the build the device is on.
UPDATE:
So apparantly, I've had a rooted 6.0.1 PI2 device persistent through factory resets for over a week, but didn't realize just how much was achieved on my device! According to diagnostics.
I'm already started on writing up the combination of methods that the OP was walking into. Turns out it works up to the September patch too.
But lucky me and not you this time. I got my device essentially decommissioned because I ran my code too soon. But in the sweetest possible way after being so pissed when my tech coach said my warranty was void.
By the end of tomorrow night I should have a thread.
Anyone still working on this?
d0lph said:
Anyone still working on this?
Click to expand...
Click to collapse
Yes. Using the dirtycow vulnerability we've managed to get an arm64 version running that will indeed allow a root console on MM builds.
The last thing standing in the way, for at least a tethered root, is for someone to help me convert the script from the flashable zip version of the SuperSu installer into basically a batch script. Because the how-to guide ChainFire wrote in comments inside his installer script is kind of hard to read because it covers all the different versions of android in a tiny block of text and not every device sets up the same SELinux environment.
Not to mention, if I could get SuperSU to try and install itself as a System Application, it would probably work with what I have already. But for some reason I CANNOT find a single guide anywhere on how to perform a "System" Install of SuperSU, everyone wants to use the "Systemless" version, which is NOT going to work I believe.
We can manage booting the device in the event of DM-Verity Failure, when that happens with the 5.1.1 OG ENG Kernel, we can indeed mount "/system" as read/write, and we can indeed change the contents of the System partition that persist through a reboot.
I just need help setting Perms & Contexts. Because at one point in time, I DID actually manage to get SuperSU to give me a root shell instead of a user shell, but only on the ADB Command Line. In that test I could not get an application to start from the launcher and have Root Permissions.
Delgoth said:
Yes. Using the dirtycow vulnerability we've managed to get an arm64 version running that will indeed allow a root console on MM builds.
The last thing standing in the way, for at least a tethered root, is for someone to help me convert the script from the flashable zip version of the SuperSu installer into basically a batch script. Because the how-to guide ChainFire wrote in comments inside his installer script is kind of hard to read because it covers all the different versions of android in a tiny block of text and not every device sets up the same SELinux environment.
Not to mention, if I could get SuperSU to try and install itself as a System Application, it would probably work with what I have already. But for some reason I CANNOT find a single guide anywhere on how to perform a "System" Install of SuperSU, everyone wants to use the "Systemless" version, which is NOT going to work I believe.
We can manage booting the device in the event of DM-Verity Failure, when that happens with the 5.1.1 OG ENG Kernel, we can indeed mount "/system" as read/write, and we can indeed change the contents of the System partition that persist through a reboot.
I just need help setting Perms & Contexts. Because at one point in time, I DID actually manage to get SuperSU to give me a root shell instead of a user shell, but only on the ADB Command Line. In that test I could not get an application to start from the launcher and have Root Permissions.
Click to expand...
Click to collapse
Thank you for taking the time to still work on this. Subscribed. Following this to the T.
Rand0lph said:
Thank you for taking the time to still work on this. Subscribed. Following this to the T.
Click to expand...
Click to collapse
If you want to follow the complete story of what I just mentioned please follow and contribute to this thread: Injecting Root & Setting SELinux - End Stages?
This is the thread that contains the Greyhat Root console, first designed for the AT&T Galaxy Note 5. But that device uses the same Exynos7420 Mainboard as the Galaxy S6 Edge, so the project is still compatible.
I haven't kept the OP maintained as I should yes. But it is actually worth it to read that whole thread as @droidvoider went out of his way explaining some of his methods. I have a bit of R&D that isn't posted in that thread as well, if you can read up on the project. I'd be more than happy to share what I know with anyone wanting to help as long as they can catch up with what we have accomplished so far.
Look at some of the other threads I've started as well for the initial methods.
Delgoth said:
If you want to follow the complete story of what I just mentioned please follow and contribute to this thread: Injecting Root & Setting SELinux - End Stages?
This is the thread that contains the Greyhat Root console, first designed for the AT&T Galaxy Note 5. But that device uses the same Exynos7420 Mainboard as the Galaxy S6 Edge, so the project is still compatible.
I haven't kept the OP maintained as I should yes. But it is actually worth it to read that whole thread as @droidvoider went out of his way explaining some of his methods. I have a bit of R&D that isn't posted in that thread as well, if you can read up on the project. I'd be more than happy to share what I know with anyone wanting to help as long as they can catch up with what we have accomplished so far.
Look at some of the other threads I've started as well for the initial methods.
Click to expand...
Click to collapse
Sorry, I didn't even acknowledge this is for the EDGE S6. I have a regular Verizon S6.
Rand0lph said:
Sorry, I didn't even acknowledge this is for the EDGE S6. I have a regular Verizon S6.
Click to expand...
Click to collapse
I don't really think that matters as much for the thread I referred to.
I tested the Greyhat Root Console on my S7 Edge, and it worked as well using the September build.
The S6 Line plus the Note 5, all use the same System on a Chip.
If anything, there may be just a couple tweaks to make when compiling it using the NDK.
Updated version of this ROM: [ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]G930TUVU4CRI2
ROM last updated: 10/30/2018
Introduction:
HUGE thanks to the guys that got this going like root & figuring out hybrid stocks! This ROM is a complete rewrite of my ROM [ROM][TMOBILE][S7_SM-G930T][Oreo Rooted] That ROM doesnt have WifiCalling & I couldn't get it to work for the life of me, so I rewrote it. I started with stock, and slowly stepped back making changes, reinstalling each time, confirming it still worked. About 200 installs later & 1000s of changes, this is the result. Yes, it took a LONG time. Hope you enjoy it! Don't forget to say Thanks so I know it is actually helpful to others, and continue doing this!
Description:
Stock Tmobile Oreo 8.0 modified (G930TUVU4CRF1)
EXTREMELY debloated! Nearly bare minimum, while still retaining hardware functionality. Eg, Samsung Gallery & Camera exist so we get 4k recording, and there aren't errors when we pull up the Gallery to edit, etc. Yes, this means NO Samsung or Android Pay. There could be more apps to debloat but Im out of time for now! (Please provide suggestions if interested)
Everything possible I replace Samsung with Google
Solid ROM. It was actually kind of slow for me, but I'm curious how this works for others.
Xposed is part of the guide, which will give you infinite customization & tweak-ability
If you hate Samsung SW and just want a solid working ROM with very few install options to get you up and running this is for you.
This will delete all of your data on the phone! (Not external SD card) This is the only way so don't ask. Backup your data!
Features:
Tmobile Wifi Calling works, along with Visual Voicemail & Mobile Hotspot
Many Aroma Installer app options
(Optional) KevinsFavorites option in Aroma. I'm not sure I'd recommend it due to my tastes. If you're looking for some good common apps tho, it includes: Amazon, AmazonMusic, AquaMail, Gmail, GoogleDrive, GoogleKeep, GooglePhoto, Hangouts, IFTTT, Pandora, RootBrowserClassic, TitaniumBackup, Uber, & Wink (If you install these and want to remove them later, use TitaniumBackup (or similiar) to uninstall
Root Features: See Downloads->Recommended Root Zip & say Thanks!
Debloated
De-Knoxed
Decrypted /data/ partition
OTAs disabled
Speed & Build Prop Tweaks
Dual speaker
Ruthless Launcher
Apps
AdAway
AOD Clock Face Themes
CPUSpy
DisableService
Kernel Adiutor
Samsung Video Editor and Trimmer
Xposed
Many more...
Download Links:
Base.7z & Oreo_Kevin71246Modded_v3.#.#.zip
Installation:
This will delete all of your data! If you continue, you acknowledge that the Author is NOT responsible for anything that happens to your phone!
Summary (for Pros)
Flash Oreo stock
Root
Flashfire
Oreo_Kevin71246Modded_v3.1.##, Auto-mount, Mount /system read/write Option
Go through Aroma setup. When finished, it should boot to Recovery (if not do this). Do a "Wipe data/factory reset"->Reboot
Detailed Steps
Install Stock Oreo:
Download mode & Setup
Make sure you have latest device drivers setup on your PC
Enable USB Debugging on phone in Developer Settings
Boot phone into Download Mode:
Turn off your device
Press and hold Volume Down + Home + Power button
When you see the warning screen, release buttons & press Vol UP. Phone should say "Downloading..."
Download and unzip Base.7z to PC (This contains stock Oreo, ODIN, & root)
ODIN
Open ODIN on PC (\Base\Odin_313.exe)
Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
Select AP, BL, CP and CSC files from the \Oreo_Stock\Base\ folder for corresponding files
Select HERO2QLTE_USA_VZW.pit
Select Start
Finished: Phone will reboot & show Carrier screen for 3-5mins. Wait until Setup screen & go through quickly (bare minimum) since you'll wipe it again. Once in Android, go to Settings->Display->Screen resolution->WQHD->Apply
Root Instructions: (+Flashfire, SuperSU)
Reboot phone into Download mode
Odin
AP: Select \Base\Root\AP_SM_G930_OREO_ENG_BOOT.tar
Start-> Wait for phone to boot to Android OS
Root
Double-click \Base\Root\cmd-here.exe & Type: root.bat [enter]
Option: 1 (Install Root No tweaks) (Or pick whatever you want)
*Note: With this system root, do not update su binary. Disable notifications for SuperSU app. Don't flash any superuser zips in recovery that are not made by jrkruse
Install Custom Hybrid ROM & Xposed
Download & copy Oreo_Kevin71246Modded_v##.zip to phone
Flashfire
Open Flashfire on phone
Red + symbol->Flash Zip or OTA->Oreo_Kevin71246Modded_v#, Auto-mount, Mount /system read/write Option->Check mark
Click Lighting bolt at bottom-> OK
Phone will reboot to Aroma. Go through setup. (See above for what's in KevinsFavorites)
When finished, allow Aroma to exit.
It should reboot into Recovery (If not, do this: immediately hold Vol-Up btn+Home btn until you see recovery on screen. If you missed it, try again: hold Vol-Down+Pwr btn ~10sec until phone restarts & immediately hold Vol-Up btn+Home btn until you see recovery on screen.)
In recovery: Factory Reset->Yes->Restart phone
*Wait 5-10min on loading screens
Go thru Android setup. Ignore "Xposed Installer has stopped" error
Followup-Steps:
Set Dialer: Phone Settings->Apps->Menu->Default Apps->Calling App->Select Phone
Recommendations:
Xposed
Setup Xposed: Xposed Installer app:Install framework option & restart phone
Xposed Installer app: Settings button (3 lines)->Download->Search "GravityBox [O]"->Click it->Versions tab->Download->Install->Back arrow (upper left)->Settings->Modules->Check box next to GravityBox [O]->Restart phone
GravityBox [O] Tweaks: (Open GravityBox app)
Battery indicator: Statusbar tweaks->Battery settings->Turn on Master switch->Battery indicatory style: None->Battery percent text...->Back
Clock: Statusbar tweaks->Clock settings->Turn on Master switch->Center clock...
Firefds Kit [O] Tweaks: (Install same way as Gravity box)
This is a supplement to Gravitybox. Things of note: Advanced power menu, call recording, & disable bluetooth toggle popup, etc
Known Issues:
Visual Voicemail may fail to register, but restart phone and give it a few hours. It works eventually.
RCS (Rich Communication Services/AdvancedMessages/Chat) texts don't show up in Android Messages & Textra, etc apps (This is an issue on stock as well!!)
Fix: (Use Samsung Messages)
How to Install Samsung Messages via ADB (Easiest way though is just reinstall!):
Download Messaging_SEP81.zip, unzip, & manually copy apk to phone via usb/Windows My Computer
adb shell (Get into shell to run beow commands)
su (Run as root)
mount -o rw,remount /system (Mount system read/write since default it read-only)
chmod 755 /system/priv-app/Messaging_SEP81 (Set permissions on folder)
chmod -R 644 /system/priv-app/Messaging_SEP81 (Set permissions on apk file)
ls -l /system/priv-app/Messaging_SEP81 (Check permissions - Should be: -rw-r--r-- 1 root root - not sure what 1 & 2 is)
ls -l /system/priv-app | grep "Messaging" (Check permissions - Should be: drwxr-xr-x 2 root root)
reboot (Reboot device)
Changelog:
Version 3.1.32: First stable build
Ver 3.1.36:
-Disabled encryption on /data/ partition to resolve "Bluetooth paired devices deleted after reboot" issue & so mods play nicer with ROM
-Fixed "Device not supported" error on Google Phone app
Ver 3.1.37:
-Added most of the apps I replaced or added as options in Aroma Installer now
Credits:
- @jrkruse & @klabit87 for Root
- @partcyborg for helping jrkruse
- @jrkruse for his similar ROMs as guides & help
- @Lanc-City for assistance in ROM modding
- @gustco for eng boot.img
- @Raymonf for modified odin
- @amarullz for Aroma Installer
- @Chainfire for FlashFire & SuperSU
- @rovo89 for Xposed
- @JaeKar99 for the cool & colorful boot animation
- @mrRobinson for AdAway ADAway.org
- Brandon Valosek for CPUSpy
- WangQi for DisableService
- Willi Ye for Kernel Adiutor
- @shubby for Ruthless Launcher
- @Craz Basics for Dual Speaker Mod
...
- Please PM me if you were forgotten!
Some screenies:
Saved2
Saved3
Well nice job!
jrkruse said:
Well nice job!
Click to expand...
Click to collapse
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
kevin71246 said:
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
Click to expand...
Click to collapse
Is this Ufirm firmware?
jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
I have so many FW packages on my PC at this point, from so many places that I used while trying to get this to work, but I think it might be a package from one of your threads(?) Since I'm not exactly sure what you're asking regarding "Ufirm FW", I'll elaborate hoping that answers your question. (Tho I'm thinking you mean the U variation/unlocked. So based on these stock files below I guess the answer is no.) If you're question is really, "is it possible to get tmobile wifi calling to work on a U model #", then I'd have to really think about that. But at this point I don't have an answer. I can tell you a million dependencies about it tho! (I seriously have hundreds of revisions I made while testing, & notes. The symbolic & meta links in Aroma initially broke it, as I found out after a week or so of testing - wish I knew a bit more about them, and why they're all there, then I'd know what was wrong about them...)
High-level process:
1)Flash Base/Stock/Oreo Rom:
- AP_G930TUVU4CRF1.tar
- BL_G930TUVU4CRF1.tar
- CP_G930TUVU4CRF1.tar
- CSC_TMB_G930TTMB4CRF1.tar
- HEROQLTE_USA_VZW.pit
2)Root with your method
3)Flash Xposed framework & my ROM (it's a "start with stock then remove what we don't want" type of Aroma/Edify script)
jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
kevin71246 said:
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
Click to expand...
Click to collapse
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
It works perfectly!!
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
charredchar said:
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
Click to expand...
Click to collapse
I believe I know what the issue is, I'm testing a fix (for THIS ROM) as we speak. Stay tuned. Maybe tomorrow if I have time and it works I'll update the OP. BTW, this ROM and my other ROM are TOTALLY different. Thanks for the feedback!
FranMLG said:
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
Click to expand...
Click to collapse
What do you mean by this? "but if you do not pull them, let me know"
And tell me more about Viper4Android, and if it works solid for you on this ROM...then I'll consider adding it. Thanks!
New version, see change log in OP for details.
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
jrkruse said:
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
Click to expand...
Click to collapse
Hi, why you have to flash this - HEROQLTE_USA_VZW.pit on 930t, is it ROM specified? if I do and don't then what are pro and cons?
---------- Post added at 01:36 PM ---------- Previous post was at 01:26 PM ----------
josh2020glacier said:
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
Click to expand...
Click to collapse
since bootloader is locked you can't use TWRP so you have to use Flashfire to install this ROM, as you know flashfire required root so you have to setup the base per OP and then root the base then install the ROM and then root it again, read the first page I don't think you will get a instructions more detailed then his
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Alkan3 said:
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Click to expand...
Click to collapse
Nauseating rainbow? LOL. Sorry. This is much more of a general question though, that wouldn't exactly pertain to this ROM specifically. And given I don't have an answer, I'd try searching BootAnimation How-Tos to get this customized. The ONLY thing I did regarding this was replaced the existing files with the rainbow ones. That's it. Apologies in advance.
Just discovered an issue: RCS (Rich Communication Services / Chat) texts don't show up in Android Messages app. See "Known Issues" in OP for a solution. BTW I posted a new ROM version a few days back that allows many choices in Aroma Installer. Make sure to pick Samsung Messages (instead of Google), so you get RCS chat text messages!
Hey everyone,
after some trial and error, I was able to pass Safety Net.
I just want to mention what I did in the process to get there. May have been a combination of things or just one...
1. I followed this guide, but make sure you notice that It's for the Pixel 5 not 5a. But the process is similar. This process didn't fix the issue. However, it's also a good how-to on how to root. I did also modify the props to the 3a.
How to Root the Pixel 5 & Still Pass SafetyNet — Full Guide for Beginners & Intermediate Users
The Pixel 5 is a great value proposition in this era of $1,500 phones. With its reasonable price tag, fully open-sourced software, and unlockable bootloader, it's also an ideal phone for rooting.
android.gadgethacks.com
2. When that didn't work, I followed this video, and hid all my banking apps besides the Google Play Services:
3. When that didn't work, I installed these both using Magisk from this post:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
4. Cleared my data and cache with Google Play and GPay + any other banking apps.
That worked for me!
EDIT: IF GOOGLE MAPS reports the wrong location, its likely XPrivacy-LUA, Google Services. Uncheck some of them.
Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!
anubis2k3 said:
Oh man....the only thing holding me back is the safety net thing, and it looks like we have a work around tell someone has an actual method made for this phone. Not sure if I'm ready to actually mess with this yet...but thanks for the post, bro!
Click to expand...
Click to collapse
Didnt think it was that big of a deal to me. But it was fun with a new phone with nothing on it.
This was the Magisk module that worked to pass safety net for me. I didn't need any others.
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.
joemommasfat said:
Google Pay "appears" to be working too. Haven't gone out and tried it yet though.
Click to expand...
Click to collapse
That's the part that I use the most, and the reason I haven't rooted yet. Please let us know if it works. Much appreciated!
I can confirm that using google pay (newer GPay app) on my rooted 5a works at merchants. I've already used it several times over the last week or so with no problems.
Deadmau-five said:
3. When that didn't work, I installed these both using Magisk from this post:
Click to expand...
Click to collapse
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.
borxnx said:
Why? Isn't the shim version just for Samsungs? Either way, it's the same mod, just different versions.
Someone who actually knows what they're doing needs to write up a tutorial. Following instructions posted by people who have no idea what they're doing but "it works" for them is dangerous.
Click to expand...
Click to collapse
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.
I only mentioned what works for me since there was no step-by-step guide.
Dangerous how? Doing any mods to your phone is "dangerous". I fail to see how this is more so than others. Modifying your phone is risky.
If it didn't work I wouldn't have posted this guide. I only mentioned the steps that I took. It's not really a guide, just how I passed safety net.
But, my 5a has still been working great since then. GPay included.
jcmm11 said:
You're absolutely correct about the dangers in following instructions posted by who knows who. I'll go further and say when it comes to root and associated items stay away from anything posted on a site other than XDA. In many cases even if the instructions were correct at some point in time they may well be outdated now.
I haven't rooted yet for a few reasons yet but will, hopefully sometime very soon. In the meantime I can state the following:
They're is no need to modify props. Modifying props to identify as a different phone would only be required for custom ROMs that don't handle it themselves (or some non-certified Chinese phones, which doesn't apply here). If you're running stock just leave that portion alone. And, if I'm not mistaken (although not 100% certain) I think safetynet-fix takes care of that for you in any case.
You will definitely need kdragOn/safetynet-fix.
Hopefully that's all you need.
I'm not sure which version of Magisk you'll need. Unless you know what you're doing and how to get out of trouble I recommend staying away from the current alphas, they're extremely cutting edge and you can expect problems.
Best best is to check the following threads and see what's going on:
Actually see this post and the 2 posts immediately following
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
That should pretty much cover things for the moment. If nobody else (@hfam ?) has done it by the time I get around to rooting I'll write something up specific for the 5a.
Click to expand...
Click to collapse
Just a quick note to say I just finished with everything (new Pixel 5a 5G, rooted + Safety net, restored all my apps, etc) and it's a flawless victory, ALL banking apps work great, SafetyNet passes, no hiccups.
I'd be happy to craft up a step by step and post it if there's some interest. It's not often I get to give back to this outstanding community, so it's the least I can do jumping on the opportunity. UFC 266 Main card is just starting, so I'll get started right after the fight and post it here in this thread.
Great to see ya again @jcmm11! Coming back to root a new phone feels like a family reunion, so great to see many of you active folks still here helping out!!
hfam
Alright, as promised, here is my writeup for a step-by-step tutorial for rooting your new Pixel 5a and getting SafetyNet up and going. I know it looks like a book, but I wanted to put it into plain language and attempt to explain the process for everyone, even absolute first timers. I know when I first started I really appreciated when the person helping didn't presume I had any knowledge, so for those that may have some experience, sorry for the wordiness. I'll also include how I apply updates when a new Android security update is pushed out. I understand that there are now elegant ways to accept OTA updates, but that is out of the scope of this tutorial as I have always had issues with OTA, and have to catch up on how that works myself. I can attest to years of using this method though (using a full factory image) to perform the "monthly" security updates, and I have never had anything but full success, so I'll share that here below the rooting tutorial.
*Disclaimer and heads-up* this is for an UNLOCKED PIxel 5a purchased directly from Google Store. At the time of this writing that is the only place I'm aware of which currently offers the PIxel 5a. Once carriers like Verizon, etc, offer this device, there may be some changes to the process, so just know up front this is for the unlocked Pixel 5a*
*WARNING*! When you unlock the bootloader on your phone it WILL WIPE YOUR PHONE and reset it to factory. If you've already used your phone and set it up, you're going to lose that setup. If you can't bear it, then the rest of this isn't for you, as root cannot be achieved without unlocking the bootloader.
First, you'll need a few things
- https://developers.google.com/android/images
and download the latest FACTORY IMAGE for "barbet", which is the Pixel 5a. You want to download the SAME VERSION that is currently installed on your device. At the time of this writing, it's the September release.
From that same page, you will need the ADB+Fastboot platform tools which will allow you to perform the required tasks, download from this link:
- https://developer.android.com/studio/releases/platform-tools.html
I use Windows 10, and extract this tools download to a folder in the root of C: called "platform-tools". You will then need to add "c:\platform-tools" to your environment path.
On the Pixel 5a, you need to enable developer options. Go into Settings/About Phone/and tap "Build Number" 7 times. This enables developer options and it will let you know when you've unlocked this as you tap 7 times. Once developer options is unlocked, go back to Settings/System/Advanced, and you'll see Developer Options is now available.
Select Developer Options, and enable "USB Debugging" and also enable "OEM Unlocking".
(**NOTE** For now at least, until you decide how you want to proceed with handling updates in future (more on that later), I strongly recommend turning OFF "Automatic System Updates" as well, just a few items below "OEM Unlocking". This prevents any updates happening automatically on a phone reboot. You don't want to wake up and find an OTA update pushed out and removed root, or worse. You can always turn it back on later.)
Plug your phone into a USB port on your PC. Allow the PC to do it's thing. You can open up Computer Management on the PC (right click the windows menu button icon lower left of your toolbar and select "Computer Management". Select "Device Manager" on the left panel. You should see "Android ADB Device" appear at the top of the right pane list of devices. if not, then visit:
Install OEM USB drivers | Android Studio | Android Developers
Discover links to the web sites for several original equipment manufacturers (OEMs), where you can download the appropriate USB driver for your device.
developer.android.com
and download the appropriate USB driver for your system and retry the above directions.
First thing we have to do is unlock the bootloader.
On the PC, open a command prompt and change directory to "C:\platform-tools" as discussed above.
Now, type in "adb reboot bootloader". The phone will reboot into bootloader. (you may receive a dialog on the phone which says something to the effect of not recognizing the PC. Go ahead and allow it, check the box to allow it in the future, and proceed.
Phone is now at the bootloader, and shows you some info letting you know it's so, including that the bootloader is locked. Also, look at the Device Manager we opened earlier and confirm that you see Android ADB Device (or similar) which confirms your PC recognizes the phone and setup for ADB commands .
To unlock the bootloader, in the command prompt type:
fastboot flashing unlock
This will unlock the bootloader, you will likely see a warning that it's going to wipe the phone. Proceed and allow the unlock. The phone will then reboot and take you to your wiped phone just as you received it out of the box, except the bootloader is now unlocked and Developer Options are still available. Let the phone continue through it's first-time setup, and leave the phone plugged into the PC. If you unplugged no biggie, but we're going right back to the PC shortly and it will need to be plugged back in before the next step to accept the file we're going to push to it.
Now, you want to open a browser on the phone and go to (at the time of this writing, v23.0 is the current stable Magisk):
Release Magisk v23.0 · topjohnwu/Magisk
This release is focused on fixing regressions and bugs. Note: Magisk v22 is the last major version to support Jellybean and Kitkat. Magisk v23 only supports Android 5.0 and higher. Bug Fixes [App]...
github.com
Scroll down and under "Assets" select that Magisk 23.apk file, download and install it. Open Magisk if it doesn't open on install, and just let it sit, we're coming back to it shortly.
PATCHING THE BOOT.IMG FILE
On the PC, go back to the Factory Image you downloaded, and extract it to a temporary directory. You will see 6 files; a few "flash-all" files, a radio image, a bootloader image, and a ZIP file called "image-barbet-XXXXXXXXXXX.zip (the xxx's are whatever the version number is you've downloaded). Double click that ZIP file and you will see a dozen files. The one we need to root the device is "boot.img".
Copy (don't move!!) this file to c:\platform-tools. Now, go back to your command prompt (still pointing to c:\platform-tools) and type in:
adb push boot.img /sdcard/Download
Now back on the phone, within the Magisk app we left open, at the top where it says Magisk, choose to install. A dialog box will open, select Patch Boot File Image. Point the process to your /sdcard/Download, and select the boot.img file we just pushed there. Now allow it to patch the boot.img and Magisk will show you it's patching it, and in a moment tell you it was successful. Close the Magisk app, open "Files" and direct it to sdcard/Download. Note the name of the patched boot file, which is called "magisk_patched-XXXXX_xxxxx.img (the X's are the Magisk version, and the x's are 5 random chars). Feel free to leave it there as you go back to the PC...
Back on the PC, in the command prompt, now type:
adb pull /sdcard/Download/magisk_patched-XXXXX_xxxxx.img
make certain you get the name exact or it won't go, no worries, just get it correct. The file now resides in the "c:\platform-tools" directory along with the unpatched "boot.img" and your ADB+Fastboot tools.
Just about done rooting, here we go!
Now, in the command prompt type:
adb reboot bootloader
The phone reboots into bootloader. Now type:
fastboot flash boot magisk_patched-XXXXX_xxxxx.img (again, use the numbers and letters in YOUR patched file!)
Lastly, type:
fastboot reboot
Your phone reboots, and you should be rooted!! Unplug your phone from the PC, open up Magisk App and confirm, the Magisk entry at the top of the main Magisk App screen should now show you the version you installed, etc!
Time to get your banking apps (and any others that may detect unlocked bootloaders/root/etc) working!
In the Magisk App, on the bottom of the screen is a 4 item menu bar. Select the right-most icon, which is "Modules". At the top of the screen select "sorting order" and sort alphabetically. Scroll down to "riru" and select the module that is JUST "RIRU", (not any of the other "riru _______" modules). Choose to download it, then choose to install it. You'll be prompted to reboot the phone, so reboot the phone.
Next, we're going to install drag0n's Universal SafetyNet fix (at the time of this writing it's currently v 2.1.1) You will need to download this via a browser on your phone, so open a web browser and go to:
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
On the right-hand side, you'll find "Releases", and v2.1.1 is the latest. Select that, then scroll down to "Assets" and download "safetynet-fix-v2.1.1.zip" By default this will download to sdcard/Download.
Go back into the Magisk App, select the "Modules" menu as above, and at the very top select the "Install from Storage" bar. Point to the file we just downloaded and install it (don't extract it, etc, it requires the zip exactly as downloaded and will do it's thing). Again, it will install the module and prompt you to reboot. Reboot.
Almost there!
At this point, if you havent installed your banking apps, do so. DON'T RUN THEM, just install them. I also have a Nintendo Switch Online app which failed because of root, so if you also have or want this app, install it now, again, do NOT run it yet, just install. Same with any other apps you are aware which have root/bootloader unlocked issues, get them installed, but don't run 'em.
Now, we're going to use MagiskHide to hide these apps and complete the process for passing SafetyNet and running apps which may not run due to root.
in the Magisk App, at that 4 item menu bar at the bottom, select the 2nd from left, or "MagiskHide". Select the MagiskHide item and it will open to a scan of all the apps on your system. By default I believe Magisk sets up to hide Google Play Services. You will see it selected, and all the other apps on your system unselected. Select each of the banking apps, the Nintendo Switch Online (if you have it), and any other apps that YOU ARE SURE will complain about unlocked bootloaders and/or root. Any onilne gaming that's popular are good choices, but again, it's easiest to NOT RUN them PRIOR to hiding them via MagiskHide. Pokemon GO comes to mind as one I've seen that needs hiding, etc, so make it easy on yourself and do a little research on any suspect apps prior to running them, then hide them if needed.
Anyhow, select your banking apps to hide them.
Now, we're going to check SafetyNet to make sure youll now pass.
On the Home menu in the Magisk App, select "Check SafetyNet". You will be prompted to download some proprietary SafetyNet shhhhhhhtuff....so let it download. Once done, SafetyNet check will open, and you should show a blue screen which says SUCCESS, and "basicintegrity" and "ctsProfile" will be checkmarked, evalType will show BASIC.
You're good to go, rooted, SafetyNet works perfect, and you can now open your banking apps and should open right up!!
If you find any specific issues about specific apps not working, or detecting root, etc, the best place to get help is in the Magisk General Discussion forum:
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
I owe those folks eternally for showing me what I know, and always having the answers for any issues I've ever had. Some of the nicest, smartest people Ive had the pleasure of knowing, they're always helpful, and even maintain fantastic sites for FAQ and chock full of great info about every aspect of Magisk.
BONUS ITEM: As I indicated above, I'd share the method I know, trust, and have used many many times, trouble free, to apply a system update to the phone without overwriting anything, and not hitting any issues many encounter using the OTA method (though I understand that's been vastly improved, I haven't educated myself as to that process and will likely continue to use this method).
Security Update (monthlies) Process using Full System Image
As above, download the newest Full Factory Image from the site. Extract this full image to a directory inside C:\platform-tools
In this directory, if you're on Windows, open the "flash-all.bat" file (don't run it, open it with Notepad or something similar, I really like Notepad++ as it's free, has a LOT of great functionality and, like the native Notepad, doesn't do any goofy formatting/fonting/etc when modifying and saving a file.)
In flash-all.bat, look for the "-w" entry in the fastboot command near the end of the file and REMOVE ONLY THE "-w", leaving the line correctly formatted (don't leave an extra space or something goofy), then save the file over the top of the original with the same name. This will remove the overwriting of your data when pushing the image, the "-w" tells the process to overwrite, so we remove it.
Open up a Windows Explorer and go to your c:\platform-tools directory. Delete (or move to another location) any "boot.img" files along with any "magisk_patched-XXXXX_xxxxx.img" files from previous operations. Also note and confirm that you have correctly extracted the latest Full System Image to it's own directory, residing in c:\platform-tools.
Now, connect your phone to the PC. Open your command prompt and point to "C:\platform-tools" again. Type: cd <name of Full system Image directory>
In command prompt, type:
adb reboot bootloader
The phone is now in bootloader. In command prompt, confirm you're pointing to "C:\platform-tools\<Full System Image extract dir>" Type:
flash-all
This will do a full factory image push to your phone, you'll see a couple quick writes and phone reboots, then begins writing the rest of the image to your phone, but since we removed the "-w" from "flash-all.bat", it's NOT overwriting your data, just the necessary system files to update it to the latest version!
Reboot your phone, let it do any optimizing and updating it needs to do, and don't run anything yet, we're not quite done, just let the phone settle in and finish booting and doing it's thing.
Now, go back and perform the steps above listed under "PATCHING THE BOOT.IMG FILE" to patch the newest boot.img from the Full System Image we just updated the phone with (push the boot.img to sdcard/Download, patch with Magisk App, pull magisk_patched-XXXXX_xxxxx.img to your PC, blast it back using fastboot), and you've now rerooted the phone.
Lemme just say again that I know this was a friggin' book, and I tried to make it as clear and plain language as I could to help even a first timer, so my apologies if it seems like an onerous process. It's really not, and once you've done this once or twice, it's a cakewalk and takes about 10 minutes of your time from start to finish to do the whole system update and reroot. Again, the newer methods to take OTA without losing root may be something you'd like to look into, i definitely will, but I'm very confident in sharing this method as I know it works like a champ and is foolproof if you take your time the first few times and make sure you do what's required (remove the "-w" from the flash-all.bat, etc)
Lastly, I've been using this method since the Pixel 2, and just performed it on my new 5a, it worked exactly as it has for years for me on the P2, so you can be confident moving forward that, if you follow instructions and take your time until it's all familiar, you'll be successful in rooting, passing SafetyNet, and applying system updates without screwing up the A/B slots or overwriting your data in the process.
I hope this helps even one person, and since I rarely find myself able to give back to the community in any real meaningful way (many of these folks are WAAAY beyond my modest skills and know so much!!), I hope that this provides some folks with a useful and meaningful tutorial, providing confidence that anyone can root their P5a (or about any Pixel it seems) without being a Magisk/Android prodigy.
@Didgeridoohan, @pndwal, @zgfg, @jcmm11, and so many others over the years have been so helpful, I couldn't have done any of this without their selfless help, so give those folks a big thanks also if this is any help to you.
Best of luck,
hfam
Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!
nsoult said:
Thanks for the write-up @hfam, it's good to know that some of the steps that i tried aren't really necessary, like using props config or hiding the actual magisk app.
Appreciate you!
Click to expand...
Click to collapse
Awww, thanks! Glad to do it and really hope it helps some folks tackle rooting their phones and passing SN!
Rooted with magisk v.23 - flashed zip as a module
So has anyone installed the October update yet?
GrandAdmiral said:
So has anyone installed the October update yet?
Click to expand...
Click to collapse
Yep, good to go. I used the same method I shared above.
Is this working with Android 12? Which Magisk version to use?
This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?
Poking around in this thread, it seems that android 12 root is a much more involved process, requiring factory wipe and additional steps.
[Guide] Flash Magisk on Android 12
Trying to root the Pixel 5 running Android 12 by flashing a magisk-patched boot image results in the phone only booting to fastboot mode ("failed to load/verify boot images") Some users have reported that booting (instead of flashing) the patched...
forum.xda-developers.com
tintn00+xda said:
This method did not work for Android 12. I updated my rooted phone to android 12 OTA. It returned to stock. I followed the method above to patch the factory boot.img file with magisk. After flashing my phone in bootloader with the patched boot.img, my phone will not reboot. says:
failed to load/verify boot images
Any advice? My Magisk is v23. Do I need to use a beta version?
Click to expand...
Click to collapse
As you stated, you are correct. You need to perform a full wipe or flash the factory image with a wipe and then root works fine and phone boots. Tried myself and works fine.