Related
Here is my experience with all this and why I need help ..
(Yes, I am new to all this, maybe that's why I get confused but alright..)
Okay, I want to root my phone with the design of DocRambone. Right, I follow your guide here:
http://forum.xda-developers.com/showthread.php?p=7329960#post7329960
And go to HOWTO#1 which says I need to flash my firmware. And so I start.
I first download Odin, get the 512.pit file and then try to find the desired firmware package(which according to the Doc guide is I9000XWJM8). Okay, I search the link and get to this: (I pick original firmwares -> Europe)
https://www.wuala.com/Samsung Galax...n/Original Firmwares/Europe/?key=AfzUZSU4SpKU
Which leads to my first confusion. I can't find anything named "I9000XWJM8". The closest I find is the one called "GT-I9000_I9000XWJM8_I9000XXJM4_CODE-MODEM.7z". Can I use this one or where is the "I9000XWJM8" ? :S
Right, I then assume it's the right one and continue only to find out that I don't know how to start my phone in "download mode". Or maybe I just can't because I got one of the phones without the 3 button combination. I'm not sure which one it is, and yes I did try all the combinations you state here:
http://forum.xda-developers.com/showthread.php?t=746814&page=2
None works. But how does the screen look like when you are in recorvery mode? Maybe you should add this to the guide, so people know if they can or cannot start in recorvery mode.
Anyway, I assume I have one of the phones without the combination and so I continue to the guide "Release: 3-button combo fix for any firmware version":
http://forum.xda-developers.com/showthread.php?t=785201
I follow the guide and get to step 6 which says "Start a new command prompt and type "adb reboot recovery"". Right, what's this now?
I go back to the big tutorial:
http://forum.xda-developers.com/showthread.php?p=7329960#post7329960
And finds the ADB tutorial to find out that I need Android Software Development Kit .. AND a rooted phone. Right, so I wanted to root my phone in the first place and now I need to root the phone in order to get the 3 button combination so I can root the phone. "Wait what?" was my 1st thought. But then I remembered that I found this guide earlier "[REF] Howto (un)root your SGS I9000 the easy way (keep all your data) (Eclair 2.1)":
http://forum.xda-developers.com/showthread.php?t=728754
Why did I got here? Because it said "the easy way". I thought that maybe it doesn't need the 3 buttom combination and so I found out it doesn't!! YAY finally a breakthrough, I thought. And so I started with this tutorial.
I was then met with this
"ROOT includes:
- Superuser 2.3.6.1
- Busybox 1.16.0 (for use with Titanium Backup)"
which brings me to another question: Does this mean that you get these apps when you use this root method? or do I need to install the apps first?
I thought it was the first one, since it says "includes". And so I start with the "Automated Method!". I dowload the .bat file and start. Follow what it says and reaches to the part where I plug in my phone. Here I get the error message: "Driver installation unsuccessfull" (Or something like it. I Don't recall since when I plug the phone in now I don't get the error. I don't even get a "ready to use removable disk" now. It doesn't even recognize the phone now when it's plugged in). Now I have tryed to connect it to the pc before (although WITHOUT the USB-debugging checked) and it worked fine. And this is as far as I can get. I am now officially stuck!
I have read comments and all but it doesn't help.
I'm realy tired from trolling these forums after being led through like 4-6 guides + the ones I havn't mentioned here (havn't counted, but something like that)..
So can anyone please, for the love of god, tell me which guide I should start with, list the guides so I know which one to go to next and answer the questions above.. My head hurts now :S ..
But in general, please write the guides more "noob friendly" or whatever .. I think alot of them are written by admins for admins(or atleast people who know their way around these phones). Atleast that's the impression I get.
I know it was a long read but I hope you'll help anyway
Thank you in advance!
/JohnTheOne
Sorry if I sound mad or offencive btw.. it's not my itention. I'm just mad and annoyed at myself because I can't make it work
Sent from my GT-I9000 using XDA App
hello there, I can appreciate if you're new to smartphones it can seem a lot to take in.
If you want an easy/simple way to root then there are 2 or 3 methods available on this fantastic forum but try this one:
http://forum.xda-developers.com/showthread.php?t=742403
just go to youtube and search for rooting videos and watch someone do it first, then you do it. very easy once you see how it is done. youtube or theunlockr.com also has great videos
Yea but my problem is now that I can't get access to it when it's in USB debugging mode.
As I posted earlier, the first time I put my phone in USB debugging mode and connected it to my computer it said "Drivers where not successfully installed" (or something like it).. And now, when I connect my phone to my computer in USB debugging mode, it won't even show as an USB. It doesn't pop up and say "USB connected" and I can't find it under My Computer.
Someone who can help me with this?
And when I plug it in, in USB debugging mode, should I press the USB connected button on my phone, like I usually do when I connect the phone to my computer without it being in USB debugging mode?
Okay, I found the device now on my computer, but I can't find any drivers for the phone to be connected in USB-debugging mode. Anyone knows where I can find drivers for this?
JohnTheOne said:
Okay, I found the device now on my computer, but I can't find any drivers for the phone to be connected in USB-debugging mode. Anyone knows where I can find drivers for this?
Click to expand...
Click to collapse
when used as USB Debugging mode, you need no driver if you plan to use it as a mass storage drive
you just pull down the tab and select mount the drive
then you can copy your Update.zip to the phone Internal SD
after it is done select Unmount the mass storage drive from the pull down tab in the phone
and now you can boot into the Recovery Mode, select update.zip
and you are rooted.
reboot back to normal, and enjoy the freedom to install any App you want to play with
The easiest way I found is to go on to Android market, install One Click Lag Fix. Then open the app and select root 2.1. Restart into recovery and select apply update.zip. Your phone reboots and its rooted. Simples!
simplest way to root is
1)go to market search for RyanZA's OCLF 2.0.
or here is link http://www.appbrain.com/app/com.rc.QuickFixLagFix
2)open the app
3) click root.
4)then boot into recovery
5)use volume button to select update.zip and click home button
6)your phone is rooted.
Hi everyone... Can anyone here let me know if these "lagfix" rooting methods work and are SAFE for a LOCKED (I have not unlocked the sim) Bell Galaxy S with stock JH2 rom? I am also a bit of a noob and would like to see what this phone can really do.
Also... Do I have to unroot it if I want to upgrade to froyo when it is released?
Please advise...
Thx.
yiannisthegreek
PS... Once this is rooted, HOW do you unroot with these "lagfix" methods if I ever need to?
i would advice againts installing the LAG FIXes as they can kill your Internal SD
there are over a dozen forum topics with people unable to repair the damage, and end up having to ship the phone back to samsung to have it repaired.
Allgamer...
Thank You for the heads up on this but now I am still confused on how to do it. I have to move the update.zip file to my internal sd card but I too have some issues that I cant figure out.
I learded how to do it on youtube watching someone called tech0stickyasglue and it seems very simple but firstly I am not sure exactly where I have to place the file and if I have to unzip it and then place the 2 folders inside it into the sd card, etc... I also have an issue with the whole "mount" and "unmount" thing.
I can mount the card while in usb debugging but when I go back to the dropdown menu it does not give me an option to "unmount" it only gives me an option to quit usb debugging and when I pick this option I get a warning message saying that I should "make sure I have unmounted form the host" or something to that effect.
Can you give any advice or step by step instructions to me on what and where I need to place these files to make this work?
I would greatly appreciate it...
Yea but the thing is that I can't go into recorvery mode.. The 3 button combination doesn't work (Talking to the people from page 1)
AllGamer said:
when used as USB Debugging mode, you need no driver if you plan to use it as a mass storage drive
you just pull down the tab and select mount the drive
then you can copy your Update.zip to the phone Internal SD
after it is done select Unmount the mass storage drive from the pull down tab in the phone
and now you can boot into the Recovery Mode, select update.zip
and you are rooted.
reboot back to normal, and enjoy the freedom to install any App you want to play with
Click to expand...
Click to collapse
When I put down the tap and select mount the drive(when in USB debugging mode that is) I can't acces the phones folders. I can't even see the extra icons you usually get, under My Computer, when you connect an USB to the computer. I can only find the SAMSUNG_Android under Control Panel -> Hardware and Sound ->Devices and Printers where it lies under the "Unspecified" section and not under the "Devices" section. And when I right click on it, press proporties and go to the Hardware tap, I can see under "Device status:" it says "The drivers for this device are not installed. (Code 28)" ..
So can anyone tell me what's wrong? (I havn't installed Kies btw, dunno if that has got anything to do with it)
JohnTheOne said:
When I put down the tap and select mount the drive(when in USB debugging mode that is) I can't acces the phones folders. I can't even see the extra icons you usually get, under My Computer, when you connect an USB to the computer. I can only find the SAMSUNG_Android under Control Panel -> Hardware and Sound ->Devices and Printers where it lies under the "Unspecified" section and not under the "Devices" section. And when I right click on it, press proporties and go to the Hardware tap, I can see under "Device status:" it says "The drivers for this device are not installed. (Code 28)" ..
So can anyone tell me what's wrong? (I havn't installed Kies btw, dunno if that has got anything to do with it)
Click to expand...
Click to collapse
Ahh... the joy of Android & Kies....
you don't really need to install Kies, I only installed Kies to check for official ROMs, but i was using the phone on the PC even without Kies installed
You can install the Android SDK drivers, inside the Android package that you download from google, there is a sub folder with both 32bit and 64bit drivers, unplug your phone and install them, then plug back the phone, it should be detected now.
in my Work PC, i never installed any driver, and i select mount, and it gets detected as a USB key by Win XP
AllGamer said:
Ahh... the joy of Android & Kies....
you don't really need to install Kies, I only installed Kies to check for official ROMs, but i was using the phone on the PC even without Kies installed
You can install the Android SDK drivers, inside the Android package that you download from google, there is a sub folder with both 32bit and 64bit drivers, unplug your phone and install them, then plug back the phone, it should be detected now.
in my Work PC, i never installed any driver, and i select mount, and it gets detected as a USB key by Win XP
Click to expand...
Click to collapse
Alright, thanks alot But where can I find this Android package then? I'm not sure what you are talking about exactly
Why wont anyone explain WHAT file(s) you put WHERE exactly for this update.zip root method? Is is some sort of "spy secret" or something?
Seriously... I CAN get to see my phone folders on my computer so I am good there but what I dont know is if I am supposed to move the entire .zip file to the root of my sd card or if I need to extract the .zip file to the root of my sd card.
At any rate... I have tried BOTH methods and I always get the same error message when I reboot in 3 button mode... Something to the effect of E: cannot open / install update.zip... Invalid or not found... (I am guessing on this as I am at work but you get the idea)...
Please... ANY help and "step by step" instruction would be GREATLY appreciated!!!
Hi,
One Click Lag Fix (OCLG) downloadable from Android Market will give u an option to root ur phone. And also it gives u an option to fix the lag in galaxy s. I have more than 80 applicatons and widgets installed in my phone. I insist that OCLF is the most useful, powerful and demanded application ever. It is so easy to use and follow. It even offers an option to unroot. So don't be afraid to download and install.
For ur reference, the bench mark speed has been increased from 800 to 2150. Comparable to nexus 1 with 2.2 was 1200. Hope this helps.
Sent from my G-I9000M Ver. UGJH2 using XDA App on Bell Mobility Network
JohnTheOne said:
Alright, thanks alot But where can I find this Android package then? I'm not sure what you are talking about exactly
Click to expand...
Click to collapse
you download it from google
just google up Android SDK download
May NOT work for 2.3.3, if attempting on 2.3.3 use old part 1! - Will wipe all data though
Windows ONLY!
Hey guys, rooted my Nexus S today, and decided to write a thorough, detailed guide on how I did it, as none of the guides I had found had everything detailed. I came across a few problems, and all of this is in the guide. I successfully completed it on my Nexus S running 2.3.2, so any version below that will also work.
The original guide was made by AllGamer, and can be found here. I followed this guide, and added things when I found it was needed
The full guide with everything (including links, pictures) can be found on my site, Complete Android.
New info: Upon finding another thread over at XDA (http://forum.xda-developers.com/showthread.php?t=931865) it has been realized that you can root your Nexus S without unlocking the bootloader, and therefore not loosing your data on the SD card. Part 1 for the new method is still the same, but choose the new Part 2!
WARNING: Rooting your device will wipe all data off it, so you will loose EVERYTHING! Make sure you backup all important data first. Only applies to old Part 2 (fastboot oem unlock method), but it is still a good idea to backup important information!
Click to expand...
Click to collapse
What you will need:
Nexus S (obviously)
Android 2.3 SDK
USB Cable
PDAnet (for drivers)
Clockwork Recovery Image
Superuser
Part 1
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Once it has finished downloading, unzip it, and run the SDK manager.
Select whatever components you wish to install, but you MUST make sure you install Google USB Driver (Available packages > Third party Add-ons > Google Inc. Add-ons > Google Usb Driver package, revision 4) otherwise this guide will not work!
We must now install the Google USB Driver, or the phone will not be recognised as a device other than a mass storage device.
Connect your Nexus S to your computer, and put it in USB storage mode.
Put it in USB Debugging Mode (Settings > Applications > Development > USB Debugging)
Windows should now recognise your Nexus S when you plug it in, and ask to install drivers. It probably won’t find anything, so we need to help it manually.
(Installing drivers manually varies between Windows versions, so please refer to http://developer.android.com/sdk/win-usb.html if you are having trouble). Launch Device Manager (you can find it in Control Panel), find Other Devices, and listed under that heading, you should find Nexus S. Right click, and select Update Driver Software. Click Browse my computer for driver software, find your SDK folder, then the google-usb_driver folder inside it, click OK, then Next. This should install the USB driver successfully. Reboot your computer.
Power off your Nexus S, connect it to your computer via USB cable, and boot it into the Bootloader Interface (you can do so by holding down the Power and Volume Up buttons at the same time).
It should say LOCK STATE – LOCKED, in white just above the green Android. You are now ready to move on!
Part 2 - Fastboot oem unlock method - WIPES ALL DATA!
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use ‘fastboot oem unlock’ (the rooting command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn’t).
Now in the command prompt, type in (without the quotes) ‘fastboot oem unlock’.
Now turn your attention to the phone, and read through the new information displayed on the screen. Using the Volume keys select Yes, then press the Power button. This will WIPE EVERYTHING! I bear no responsibility for any lost data on your phone!
If everything is successful, on your phone, the LOCK STATE should now read UNLOCKED, and on your computer, the command prompt window should say something like this:
Download the Clockwork Recovery image (here if you don’t already have it) to your Android SDK tools folder (*Android SDK*\tools).
Rename the newly downloaded Clockwork Recovery image to ‘recovery.img’ (no quotes).
Now we need to flash it to our Nexus S, so enter this command into the Command Prompt (make sure it is in the Androis SDK tools folder!) ‘fastboot flash recovery recovery.img’ (without the quotes).
If all is successful, the Command Prompt window should look something like this now:
Download the superuser app to the Android SDK tools folder.
Power on your Nexus S, leaving it connected to USB.
Mount the USB storage, and drag and drop the superuser .zip file you just downloaded into the root of the internal SD card (so Computer > *Device Name*, not in any other folders!). It should look something like this:
Power off the Nexus S, and return to the Bootloader Interface (step 9, part 1).
Select Recovery using the Volume buttons, then the Power button.
The phone should reboot into Clockwork Recovery, but if not don’t panic, just repeat steps 9-12, including downloading a new copy of the file (mine only worked the second time around, don’t worry!)
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot. (You will now also have an unlocked padlock when you boot up)
Done! You now have to set up your phone again like when you first got it, but it will be rooted now.
New Part 2 - Does NOT wipe everything - Keeps a locked bootloader
Make sure Part 1 is completed.
Make sure you have downloaded the Clockwork Recovery file and the Superuser file.
Move the Clockwork Recovery file to your tools folder within the Android SDK folder, and rename it to recovery.img (for simplicity).
Connect your Nexus S via USB to your computer and mount it as USB storage. Copy across the Superuser file to the top level of your sdcard. (So the first window you see, not in any other folders. The sdcard is just where all the files are stored, don't worry about it too much for now).
We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don't worry about this!). Follow along with any other instructions. You should be set now.
With the latest SDK version, some tools have been relocated to another directory, so we need to make a copy and move them back. Navigate to the directory where you unzipped the Android SDK file in part 1. Inside it, go to the platform-tools folder, and copy both AdbWinApi.dll and AdbWinUsbApi.dll. Go back to the main Android SDK directory and find the tools folder. Paste these two files in there, and we are all ready to use 'fastboot boot' (the boot image command) now.
Open a command prompt window (Start > Run > cmd.exe).
Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) 'cd c:\*YOUR SDK*\tools'.
Make sure your Nexus S is still in the Bootloader Interface (refer to step 9, part 1 of it isn't).
We now need to use the 'fastboot boot' command to load Clockwork Recovery onto our Nexus S. In the command prompt, type in the following (but without the quotes, as always) 'fastboot boot recovery.img'
Once you are in Clockwork Recovery (it may take a couple of tries, don't panic, just redownload Clockwork Recovery, and complete steps 3 and 10, part 2) it should look something like this:
Using the Volume buttons and Power button, select install zip from sdcard.
Select choose zip from sdcard.
Select the su-version#-signed.zip file you downloaded earlier and apply it.
Select yes (there are lots of nos).
Confirm it says something like this: install from sdcard complete
Select Go Back.
Select Reboot.
Done! You should still have all your data present on your phone, and have root access!
Notes
As AllGamer said in his tutorial:
It’s normal to lose the recovery after the reboot, the steps to flash the CW recovery needs to be repeated every time you want to access the CW recovery.
This is due the build in protection in 2.3
As some one pointed it out on another topic, the good thing about this is that you’ll never lose the stock recovery of 2.3, thus minimizing the chance of a bricked phone.
If you want to the CW recovery to remain permanently, you’ll need to rename /etc/install-recovery.sh to something thing else
Click to expand...
Click to collapse
Keep this in mind! It's not because you did something wrong
Also, some root apps require BusyBox to be installed, as I found out with Titanium Backup, so once you set up your Nexus S again, head on into the Market, and download BusyBox. It installed fine on my Nexus S this way, and now TB works fine.
I hope this is the best, most thorough guide you will find on rooting the Nexus S. Enjoy! Feedback is appreciated, and I will help out if you need any extra help.
Your guide has been wonderful however I'm stuck on part 2, step 4. I tried writing in the path to my directory and they keep giving me whatever I wrote in the command prompt "is not recognized as an internal or external command, operable program or batch file"
"Change to the tools directory within your Android SDK folder by using the following command (without the quotes and replacing *YOUR SDK* with the path to your Android SDK folder) ‘cd c:\*YOUR SDK*\tools’."
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
STARSCR33M said:
This is how my command prompt looks like when I first open it. "C:\Users\Du>"
and this is what I typed in the command prompt: "Downloads\android-sdk_r09-windows\android-sdk-windows"
^^^I did exactly what you said above and nothing is happening. I don't know whether I'm writing in the directory wrong or what. Please help me out thanks
Click to expand...
Click to collapse
Ok so if you want to change directories in the command prompt, you need to use the command
Code:
cd
So in your case I would type in
Code:
cd c:\Users\Du\Downloads\android-sdk_r09-windows\android-sdk-windows\tools
That way is fool proof, however you could take a shortcut, because you are already in the Users/Du folder (because of how it looks when you first open it), you could just type in
Code:
cd Downloads\android-sdk_r09-windows\android-sdk-windows\tools
Hope that helps
ravidavi said:
Your guide is nice, however as shown in distortedloop's stickied Root & Recovery thread, fastboot oem unlock is not required for rooting & flashing. We no longer have to lose all our sdcard data when first rooting and/or flashing a ROM.
Click to expand...
Click to collapse
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
EDIT: New approach added, now there is choice and easyness for all
Other than that, this seems to be a nice amendment of Allgamer's sticked root & recovery thread. I'm sure it will be useful to many.
Click to expand...
Click to collapse
Thanks
Jonathon Grigg said:
I think this way is a cleaner approach personally, but hey choice is good That's what Android is all about
Thanks
Click to expand...
Click to collapse
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step. Once you're in clockwork you pretty much own the phone. I'll be interested to see if someone can use clockwork to flash a new boot image once rooted without the unlock; if so I can't see any reason to unlock the bootloader. That said, mine is unlocked, and I like it that way, but many won't root for fear of losing data on the phone.
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it. I guess that's there own fault for not doing enough searching on their own...
Anyways, nice and thorough effort. I'm sure many will benefit from your additions to AllGamer's tutorial.
distortedloop said:
I'm not sure that wiping all your data pointlessly is "cleaner."
It's not even clear what exactly the oem unlock of the bootloader really does for us, since you can get into clockwork recovery without that step.
Click to expand...
Click to collapse
I have been wondering that myself. My guess is that for the average user you don't need to, but maybe it's for real power users who build their own ROM which has been fully modded or something, I'm not sure.
but many won't root for fear of losing data on the phone.
Click to expand...
Click to collapse
I definitely agree with that, and your guide is probably the best way for those people!
Even if you end up having to do the oem unlock in the long run for some activities you want to do, it seems that rooting, then installing Titanium and backing up your apps and app data fully is a better way to go than just losing all your data (any app that doesn't store its data on the sdcard) that can't be backed up without root would be a lot less painful than WIPING everything on the phone, including the sdcard.
Click to expand...
Click to collapse
Exactly, this is one of the better uses for both methods. I already had to wipe my phone twice due to Samsung CS so I'm used to it Although it does give you a chance to clear out the apps you don't need. Doing that I noticed better battery life on my phone.
It's not worth arguing about, but I think any method that is including the oem unlock step should at least mention that that step can be skipped. How many people will go through the pain of a wipe that they didn't need to because they didn't see that there was an option without it.
Click to expand...
Click to collapse
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Thanks distortedloop
This is awesome cause i relocked my bootloader i really just needed root. Thanks!
Edit oops lost track of tabs open.
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Jonathon Grigg said:
I wasn't going to argue I'm happy to adjust my tut to include something about this, after all it was aimed at more beginners.
EDIT: Added a new part to my tutorial based on your guide, just includes some more detail. Thanks again.
Click to expand...
Click to collapse
Nicely done. Thanks.
sam4free said:
I think we can use this method to unlock oem without wiping data.
boot cw -> full backup -> unlock and flash cw (wipes data) -> restore backup (got ur data back and oem unlocked)
the only problem i can think of is that restoring backup would re-lock oem again but i am not sure of that.
i can't try this right now but if someone could, please give feedback.
Click to expand...
Click to collapse
That's what I suggesting a couple of posts above (root without unlock to at least make a backup of user data).
Restoring a titanium backup would not re-lock the phone. A nandroid restore might, depends on what all it imaged and restores, but it's so easy to re-root, that doesn't seem like a big deal.
Jonathon Grigg said:
Download the Android 2.3 SDK (or direct from Google here, 32MB).
Click to expand...
Click to collapse
Looks like you forgot to add the link in your copy pasta.
AtomicPC said:
Looks like you forgot to add the link in your copy pasta.
Click to expand...
Click to collapse
I've been working on it I just wanted to get it up here as soon as I could That's why I mentioned that the full guide is available on my website. I'm going back to school today, so I don't really have too much time for changing links now. Besides, most people on XDA should know how to look at the 'What's needed' part
Sent from my Nexus S using XDA App
Jonathon,
Thank you for posting this detailed guide to rooting without losing your data! I do have a question. As you've probably heard, there are a few updates coming soon and if they are like they were on the N1, they always broke root. So getting root back was tricky unless I "unrooted" before applying the update. Using your method, is it easy to "unroot"? Thanks!
No problems
As for your problem, I never actually had a N1 so I don't exactly know why that would happen. So far from the 2 updates available to NS owners it seems like the OTA update does break root but it appears to be the same to get it back again. Can someone confirm this? I haven't been through an update with my root yet.
As for unrooting, if you haven't unlocked the bootloader (so you have followed the new part 2) I think it is just a case of finding a stock image (I think there's a GRH78 one around here somewhere) and booting into Clockwork Recovery and flashing it. That should remove root and then also give you a notice to install the GRH78C OTA update so you get the latest version.
I think that is what you meant? If you did unlock the bootloader (using the original part 2) then I think you just have to follow the same steps as I mentioned just then but afterwards go back into the bootloader interface and run 'fastboot oem lock' and it should be right.
Sent from my Nexus S using XDA App
Question on Part 2- step 1.
Code:
# We now need to install PDAnet on our PC so that Windows can see our Nexus S when we are using the Command Prompt. Install PDAnet from here, select Samsung when asked about the Manufacturer, allow the driver to be installed (because the driver is unverified, don’t worry about this!). Follow along with any other instructions. You should be set now.
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
hmanxx said:
Why above step is required if one already installed USB Driver for Nexus S and "ADB devices" command can find the device ?
On Allgamer thread didnt ask to repeat installing USB driver ?
What purpose for the pdanet driver ?
I dont want to put redundant drivers into my system which may interfere each other during flashing process.
Click to expand...
Click to collapse
When I tried to use the fastboot command with my Nexus S connected, it would hang and not do anything, despite leaving it for about 5 minutes. I searched online, and found the PDAnet solution, so I don't know what the difference is exactly. All I found the Google SDK USB drivers to do is enable you to see your device in Device Manager, however you could try it without the PDAnet drivers, and let me know what happens!
Thanks
Thanks for the prompt reply.. I tried out the google driver..it doesnt work under fastboot. I eventually get the fastboot enabled driver..that could explain why the pdanet driver required.
After i installed the fastboot enabled driver, i could test the connectivity under fastboot with "fastboot devices"
thanks going to try out rooting..i just want simple root access..without wiping data is a ++ ..
I managed to run fastboot boot recovery.img...going into clockwork menu..apply the superuser.zip.(for froyo version)..till completion..no word of failure..
However after rebooting, su and SuperUser.apk are not installed.( I used adb to check the system/app and system/bin folder.
Edit- manage to root properly after system mounting .
Just a note..to properly complete the rooting, one need to apply mounting then mount system before applying the Superuser.zip install from sdcard.
Prior to step 11, you may want to add the following steps for folks having problem to get the superuser.zip to install properly.
Originally Posted by droidmage
So all you guys who are having trouble getting root inside the rom, When your in recovery before you flash the superuser.zip file select -- mounts and storage -- then --mount /system -- then flash the .zip file and reboot
Click to expand...
Click to collapse
Thanks for the extra bit of info, I will attempt to add that in when I get a bit more time on my hands. when I did it it seemed to work fine so thanks for discovering that!
Enjoy your rooted phone
Sent from my Nexus S using XDA App
hi, this is how i managed to get root working on my tab, everything went fine for me till it came to booting into recovery then nothing use to happen so i combined two separate guides to get it working. thanks (bcmobile and 411tecknology)
the command in "(getting root 5) )" worked for me as i was getting stuck with "fastboot flash recovery skitzandroid-recovery.img"
i unlocked the bootloader by firmware upgrade the the following
for all those people like me with no experience in dos commands or linux, hope this works for you
PREPARE:
1) With your Tab in fastboot mode (step 1 of “GETTING ROOT” below), make sure you have a working fastboot implementation:
working dir\\fastboot devices
If all is well, you should see your device serial number. If there is a problem, you won’t get any response.
2) Downlad the two files attached to this thread
3) create a folder in drive c naming it "root"
This will be referred to as the working directory throughout the rest of this guide
4) Copy skitzandroid-10-1v-root.zip to your working directory (DO NOT UNZIP!) c: root
5) Extract the skitzandroid-recovery.img file from skitzandroid-stock-recovery.zip to your working folder. Your working folder( c: root) should now have 1 IMG file and one ZIP file.
6) copy fastboot files to the the folder that you are going to use as working dir ( c:root)
7) Copy the skitzandroid-10-1v-root.zip file to the root of your sdcard. You can eithe drag/drop, or run:
working dir or c:\root>adb push skitzandroid-10-1v-root.zip /sdcard
GETTING ROOT:
1) Power off your Tab and power it back on, while holding the VOLUME DOWN button.
2) When the DOWNLOAD / FASTBOOT icons appear, press VOLUME DOWN again to select FASTBOOT icon (the one with the USB logo) and press VOLUME UP to confirm selection.
3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
4) Open a terminal / CMD prompt and CD to your working folder
keep doing cd.. until you get to "c:>" then
cd/root
5) Run the following command:
c:\root> fastboot boot skitzandroid-recovery.img
..and wait. It might not look like anything is happening but it is.
6) You should now have a recovery menu. Use the volume rocker (up/down navigates menu options)
to select “Install zip from SDCARD” (or something like that)
7) Navigate to the root of your internal storage (/sdcard), select the skitzandroid-10-1v-root.zip file and press (tap!) the POWER button to confirm selection.
Once complete, use the Volume rocker to select “REBOOT” from the menu and press (tap!!!) the POWER button to confirm selection.
9) YOUR’RE DONE. Press the thanks button on this thread to continue
TESTING:
Check your apps menu to confirm the existence of SuperUser app.
whats wrong with this?
http://forum.xda-developers.com/showthread.php?t=1079781
Nothing!
I used it on UNLOCKED 10.1v (not from Vodafone) and had no data loss!
Great, Thanks
Frank
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
TNTCOSMOS said:
I do not understand: 3) Confirm you are now in fastboot mode and do a:
fastboot devices
If all is well, you should see your device serial number.
Where do I enter this data?
I mean - fastboot deviсes
Click to expand...
Click to collapse
once you start your device in fastboot mode and connect it with the computer to make sure your device is recognized by the computer you open command prompt take it to your working dir.. (ie. c:>root) in our case type fastboot devices and hit enter, if your computer recognized your device you will the serial number under it.
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
assuming you have installed sdk if not please do so, then staying in sdk go to
(C:\android\android-sdk-windows\platform-tools ) by clicking your mouse in desktop
(not cmd prompt). above eg.. is how i installed sdk on my desktop yours may be different, now in platform-tools you will see two files called fastboot copy them both to to your folder called ..root.. and you are set to go.
bottom line is if you want to start fastboot from any folder in cmd you have to have these two files in the folder.
also if you know that your device is detected by your computer dont worry about step 3. all it does is tell you that your device is connected.
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
TNTCOSMOS said:
I have all turned out, the problem was the drivers. I copied the driver from pdanet and it worked!
Click to expand...
Click to collapse
Glad to hear that you finally got the root.
same problem
TNTCOSMOS said:
im sorry> can you help me?
When i write in the command line "fastboot.exe devices" nothing happens....
Click to expand...
Click to collapse
i've tried with pdanet too but it's not working....like the computer can't see the device...any ideea ???
and when i write "fastboot boot ......etc......" it says <waiting for the device>
please help
You need the drivers installed for fastboot, have you installed them? Please have a look at the [Guide] Unlock your bootloader thread. it contains all the details to get fastboot working.
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
zbuggy said:
thank you...finally did it
another noob question...how do i enter in cwm for installing another ROM ???
Click to expand...
Click to collapse
The easiest way if you are rooted is to install rom manager from the market. It has an option to reboot to recovery if you have CWM installed. It also allows you to update to the latest CWM recovery if there is one.
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Download latest rom and instructions from samfirmware.com using odin Get ur tab into fastboot mode with 3 button recovery and start from scratch.
It should work out
Sent from my GT-P7500 using Tapatalk
zbuggy said:
i've tried putting the TB Galaxy 1.0.9: Honeycomb 3.1 + TouchWiz UX and i made a mistake... in cwm i've uploaded the zip file only with the update and not the rom itself.since then the tab won't start...it stop's in the beggining at the "samsung galaxy tab 10.1v"...any ideea...what can i do ?
Click to expand...
Click to collapse
Do the following. If you have not yet odin.
Download the full rom.
Follow instructions in how to get into fasboot in sticky thread.
Once in fastboot you can load recovery via it, to do that download the recovery from droidbasement.com/blog, search on pershoot's website for recovery 4.0.4 if i remember correctly then type
fastboot boot recovery.img
where recovery.img is the name of the file you downloaded from droidbasement.com
Recovery will then load give it a minute or so.
Once loaded you can push the downloaded full rom via adb. That is part of the android sdk.
Like this: adb push romfile.zip /data/media/ (this will take a few minutes)
Then in cwm instal rom.
I hope it helps. Btw, remember you need to flash the wipe script of the rom before you install the rom if you are comming from stock.
Send from my GT-P7100
10x everybody it worked!!!!!!!!
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
DannyBiker said:
Still me, posting in yet another thread. Still can't get the proper drivers. Pda method is not working. Which version of PDanet should I use ? The latest ? This is ****ing irritating...
I'm used to have to struggle to get things work at the beginning, but with my Magic and Hd2 it was a matter of hours...not weeks ! I'm sure it's something stupid but everybody deserted these guides topics...
I'm actually considering posting in the Dev section just to get attention...
Also, pershoot blog's advices are a joke : with no tags, a not working search field, no categories, try to find an info ! Knowing that the word "Recovery" will pop about 3 times per subject, I'm good to spend the week-end searching...
Click to expand...
Click to collapse
Hello,
I have been successful with rooting on win7. With win xp - after a few day struggling - fastboot did not give a go. Hope this helps
I just can't get the "Adb Original" signature from Pdanet. I always get standard Adb. I add the galaxy tab lines in the .inf file but still...
Do you guys edit the inf file with Wordpad or another tool ?
Hi everyone,
I see more people than usual having issues with Rooting their Nexus 7 because of problems with booting into CWM recovery post flash - thought I would do a nice plain and easy to follow guide including instructions for booting into CWM recovery from a command point (thanks to Wugfresh for his Toolkit which is used in the guide).
http://www.androidnz.net/2012/07/how-to-root-your-nexus-7.html
Porting the full guide here, first the text because that is a simple cut n paste job, images to follow soon:
Before we get down into the nitty-gritty of the guide itself you should familiarise yourself with our usual disclaimers at the beginning of this post. I say this not because we don't care if you have problems, it's just that our capacity to trouble shoot is limited, and you shouldn't have embarked on an adventure to Root your device unless you did your due diligence first and had some understanding of what you were up to. One final disclaimer weasel-word at the off: the CWM recovery ports for the N7 are still a little iffy at this stage and even when taking appropriate steps to make it permanent you may only be able to boot into it via a command prompt window. Expect updates once fixes are available.
Disclaimers out of the way, here are the things you will need:
A Nexus 7, fully charged
A windows PC (the guide may work on macs via Windows virtual environments, but that isn't confirmed by us and is outside the scope of this guide)
The appropriate Nexus 7 USB drivers, there are several ways to get these:
Preferred method - Go to this thread at XDA-Developers and download and install the Root Toolkit there, which has an automated drivers installation included (this is preferred because it is what the guide that follows is based on because the Toolkit is probably going to be the most straightforward for the majority to use, and even if it fails and they have to resort to using command prompts that is more easily done from the Toolkit). Many many thanks to WugFresh at XDA for producing such a noob-friendly Rooting application - please consider making a donation to him here.
Install the Android SDK from here. Please note if you are already an SDK user that the Google USB drivers in the SDK have updated with the release of the Nexus 7 and Jelly Bean and you should update your drivers from within the SDK itself
Install the universal drivers from this post at XDA-Developers, but please make note of how you will need to adjust fastboot commands if you are using these drivers
Go to this post at XDA-Developers and install the USB drivers from there if you have no luck whatsover with any of the other methods
OK, now that you've got the Root Toolkit let's proceed (if you plan to do this with the SDK and command prompts then you should be advanced enough to follow the guide here, I did the first time and if you've done this stuff before the process is trivial).
Open the Root Toolkit, at the prompt to select your device scroll down to the bottom and select the Nexus 7 and the version number that corresponds to the firmware installed on your Nexus 7 (you can find this out in Settings --> About tablet --> Android version)
You'll be greeted with a screen that looks like this:
Click on Initial Setup and use the automatic driver installation facility from here to install USB drivers, it will check that ADB and Fastboot commands are working before dropping you back to the install window.
Turn on USB Debugging in the Nexus 7 by navigating to Settings --> Developer options. Turn on Developer options using the toggle in the top right hand corner, and then turn on USB debugging
Connect your Nexus 7 to your computer with the micro USB cable that came in the box. At this point it is vital that your computer recognises the Nexus 7 as a connected device, you will know if it has because a Nexus 7 "AutoPlay" window should pop up and ask you what action you want to take. If it doesn't show up, pull down the notification tray and press on the notification that says "Connected as a media device". A new menu will open and select the "Camera (PTP)" option. You should now get the AutoPlay window.
Head back to the Toolkit, and select "Unlock" from here, be aware that this will wipe your device (you might want to take a backup if you've already installed a lot of stuff on the device, that's just a button click away also in the Toolkit)
This will boot the device up to a screen giving you the option to unlock the bootloader, with "Yes" selected hit the power button. You'll see some text in the top left corner telling you it is unlocking the device, and then you will see the red "Locked" text toward the bottom of the screen change to "Unlocked". Moments later the device will reboot, and because it will have been wiped you will need to either set it up again or just skip past set-up and get back to the homescreen.
Once you're back onto the home screen, connect as you did before and take the same steps to turn on USB debugging and get the AutoPlay prompt to appear. Then go back to the Toolkit and select the Root option with permanent CWM recovery. All things going well the process will be fully automated from here, it will check that ADB and Fastboot are working, push the SU and CWM files to the device, boot the Nexus 7 into it's bootloader, flash CWM recovery to the device, and then reboot with Root privileges and a fresh new recovery permanently installed.
...or so the theory goes. Using this method I get Root, but CWM recovery is only accessible via command prompt, and I see others having the same problem. So...
Accessing CWM recovery:
In the Root toolkit go to Advanced Utilities by launching it here:
On the next screen select Launch CMD Prompt:
Once the command prompt appears type: ADB reboot recovery - the phone will boot into CWM recovery for you, so you can do things like make Nandroid backups, install zip files and so forth
Installing the 4.1.1 update post-Root and installation of CWM recovery:
Install OTA Rootkeeper by Supercurio from the Play Store here
Open the app once installed and grant it SuperUser privileges
In the app select "Protect Root", and then "temp unroot" the device
Download a zip of the 4.1.1 update here.
Copy it to the internal SD of the Nexus 7
Access CWM recovery as per the instructions above. In this version of CWM recovery you will navigate the options with the volume keys and press the power button to select an option - do that to navigate to "Install zip from SD card" and press the home button
On the next screen go to down "Toggle signature verification" and toggle it until it says "disabled" at the bottom of the screen (it should be set to default to disabled, but you lose like 5s making sure)
Go up to install zip, navigate to the zip file you downloaded in step one and install it
When the device reboots go to OTA Rootkeeper and restore Root, viola! You're done!
So, after all is said and done you should have a Rooted Nexus 7, running the 4.1.1 update, and with a custom recovery that can only be accessed via command prompt. Don't forget to shout WugFresh, the Toolkits developer, a coffee - make a donation here.
Would be nice if you posted that guide on this forum too.
Thanks for the guide.
Oooohh pictures
Caliyork said:
Oooohh pictures
Click to expand...
Click to collapse
You know, for the totally acopic
Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?
Dillon610 said:
Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?
Click to expand...
Click to collapse
No idea. You can simply downgrade to an older stock image using his Toolkit though and then follow the same process used in the guide to update to the latest build.
"Meh" at requirement #2:
A windows PC
Click to expand...
Click to collapse
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.
JaSauders said:
"Meh" at requirement #2:
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.
Click to expand...
Click to collapse
"Windblows"
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
There's a wiki on cyanogenmod.com that explains root.
mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
Should be doable on mac in a windows virtual environment, which seems to be how most mac users are doing things here at XDA.
Actually looking for someone to write "for mac" guides, if anyone is up for that!
This is my NOOB friendly version for rooting and installing Dual Recovery on a Sony Xperia Z1S (C6916).
First things first, I have written this entire this myself and have only used links from other posts here on XDA.
The thank you's will be at the end of this post.
Ok, Now onto the real reason your here...
Follow these steps to pre-pair your Z1S for the road ahead...
1) Go to "Settings-About Phone".
Be sure your "Model Number" is "C6916".
Your "Build Number" is "14.4.B.0.37".
If your "Build Number" is different then see 2nd post for "How to Downgrade/Upgrade Build Number"
2) Click "Build Number" about 7 times (I think) to unlock "Developer Mode".
3) Go back to "Settings" screen.
Second option from the bottom should now be "Developer Options".
5) Enter this new screen and enable "USB Debugging".
6) Go back to "Settings" and enter "Security".
Enable "Unknown Sources" and disable "Verify Apps".
7) Go to "support.sonymobile.com/us/tools/pc-companion/"
Download, Install, plug device in, and it should detect and install drivers for your Z1S.
8) Download & Extract "forum.xda-developers.com/showthread.php?t=2784900" to a folder on the desktop (Name folder something easy like Z1S).
9) Download & Extract "Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip" from "nut.xperia-files.com/" by clicking the "XZDualRecovery" to the same folder from step #8 (keeping separate folders inside to avoid confusion).
Well that seemed like allot now didn't it? Well the worst is over (hopefully).
Follow the below steps to root your phone...
1) On computer go to the folder where you extracted "Easy Root Tool v12.4"
Run file called "install.bat"
Wait for it to load and follow the on-screen instructions to gain root.
Notes!!!
a) If at any time it seems like the tool has frozen, it probably has.
Wait for at least 1 minute and then click the red X in the top right of the window to close.
Press "Ctrl+Alt+Delete" and select "Start Task Manager" (depending upon windows version).
Choose the "Processes" tab and look for "abd.exe".
Choose it and then click "End Process" and confirm in the new window.
If you do not find "adb.exe" or you have killed it already then repeat step 1.
2) Once Easy Root Tool v12.4 has completed and shows a successes message you will be rooted! But we cant just use it as it is now, its "SuperSU Binary" is outdated.
3) Unplug usb and reboot your phone.
4) Once rebooted, go to the "Play Store" and search for and download "supersu" by "Chainfire" (support him if you can )
5) Once installed run supersu and a window should come up saying to update binaries...well...update them
6) When finished you will now have root, super user control, but outdated "BusyBox".
******* NOTE!!!I have found out that some users were having problems after updating "BusyBox".
Update at your own risk!!!
BTW it worked for me with and without updating so I'm just giving feedback from other users.
7) Use "Play Store" again to download, install, and run "BusyBox" by "Stephen (Stericson)".
a) Let it run until "Smart Install" is finished.
b) Choose "Replace All (Symlinks all)" (not supposed to be able to but it worked for me )
b1) if it doesn't check then don't worry about it. its an extra step
8) Choose "Install" and wait for process to finish.
9) Congratulations! You now have Root, SuperSU, and BusyBox needed to use your phone to its (almost) full potential.
Now onto the Custom Recovery...1) Go to the folder we created (in a land far far away...lol...couldn't help it ) and go into the dual recovery folder.
a) Run "install.bat" and (if we installed SuperSU) choose option #1 (if we installed SuperUser) choose option #2.
b) Follow instructions until you get success message. (see above for freeze or errors fixes at 1-a)
2) Congrats again! this time you now have a dual recovery!
a) I recommend installing "NDRUtils [root]" by "CamberCreek", it makes things much easier with your new found recoveries.
Here is my who's who and thank you's for this post. (this is in order of use in guide not relevance or importance)1) XDA for such a great site!
2) Sony Mobile for a great phone and PC Companion.
3) zxz0O0 for his Easy Root Tool v12.4 without which I would have been lost.
4) [NUT]'s Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip recoveries woot!
5) Chainfire for SuperSU the force in this rooted world.
6) Stephen (Stericson) for BusyBox the gears that keep us going.
7) CamberCreek for NDRUtils [root] making Xperia recoveries easier since....
8) Bin4ry & Androxyde for Flashtool making time travel possible?
9) And anyone else i might have missed.
Hope this helps those that were stuck like myself trying to get my phones true power unlocked!
***** NOTE!!!I'm not sure if its just me/my phone/everyone's phone but i have noticed while working to get adb to recognize my device my usb debugging would seem to not be working (adb devices). If anyone has some feed back about this problem i would love to hear. BTW my device is less then 2 months old.
Ok, so you updated and now want to root? Well great news! We can get you downgraded to "14.4.B.0.37" so you can rock like the rest of them!
1) Download, install "flashtool.net/downloads.php".
2) Download "storagecow.eu/Xda/Sony/Xperia%20Z1s/C6916_14.4.B.0.37_T-Mobile.ftf".
3) Move "C6916_14.4.B.0.37_T-Mobile.ftf" to folder "C:\Users\(your name)\.flashTool\firmwares".
4) Run "Flashtool" and wait for loading to finish.
a) Connect your device and Flashtool should recognize it and show that it is connected and has debugging turned on.
1a) If debugging is off then go to "Developer Settings" again and turn off then back on the "USB Debugging" option.
b) Click the lightning bolt in the top left area.
c) Choose "Flashmode" and click "Ok".
d) On the left should be the files you moved, choose "", uncheck the "DATA" box on the right side, and lastly choose "Flash".
e) When it says to turn "Off" your device and enter "Flash mode", turn off and wait for the charging screen (if connected still) or it to fully turn off.
f) Disconnect device and hold down "Vol. Down" and plug device back in. When you see your charging lights show/flash a few times you should have a blank screen and no lights.
g) Flashtool should have automatically started flashing now.
h) When finished exit flashmode by removing usb and holding the power button down to turn on. If it dont vibrate after a few seconds just release power and try again.
5) Felicitations! You should not be running "14.4.B.0.37" and are now able to follow above guide!
Forgot to mention that once finished rooting with above method you can upgrade to latest (as of this post) and still keep root. happy rooting
theshadower10 said:
This is my NOOB friendly version for rooting and installing Dual Recovery on a Sony Xperia Z1S (C6916).
First things first, I have written this entire this myself and have only used links from other posts here on XDA.
The thank you's will be at the end of this post.
Ok, Now onto the real reason your here...
Follow these steps to pre-pair your Z1S for the road ahead...
1) Go to "Settings-About Phone".
Be sure your "Model Number" is "C6916".
Your "Build Number" is "14.4.B.0.37".
If your "Build Number" is different then see 2nd post for "How to Downgrade/Upgrade Build Number"
2) Click "Build Number" about 7 times (I think) to unlock "Developer Mode".
3) Go back to "Settings" screen.
Second option from the bottom should now be "Developer Options".
5) Enter this new screen and enable "USB Debugging".
6) Go back to "Settings" and enter "Security".
Enable "Unknown Sources" and disable "Verify Apps".
7) Go to "support.sonymobile.com/us/tools/pc-companion/"
Download, Install, plug device in, and it should detect and install drivers for your Z1S.
8) Download & Extract "forum.xda-developers.com/showthread.php?t=2784900" to a folder on the desktop (Name folder something easy like Z1S).
9) Download & Extract "Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip" from "nut.xperia-files.com/" by clicking the "XZDualRecovery" to the same folder from step #8 (keeping separate folders inside to avoid confusion).
Well that seemed like allot now didn't it? Well the worst is over (hopefully).
Follow the below steps to root your phone...
1) On computer go to the folder where you extracted "Easy Root Tool v12.4"
Run file called "install.bat"
Wait for it to load and follow the on-screen instructions to gain root.
Notes!!!
a) If at any time it seems like the tool has frozen, it probably has.
Wait for at least 1 minute and then click the red X in the top right of the window to close.
Press "Ctrl+Alt+Delete" and select "Start Task Manager" (depending upon windows version).
Choose the "Processes" tab and look for "abd.exe".
Choose it and then click "End Process" and confirm in the new window.
If you do not find "adb.exe" or you have killed it already then repeat step 1.
2) Once Easy Root Tool v12.4 has completed and shows a successes message you will be rooted! But we cant just use it as it is now, its "SuperSU Binary" is outdated.
3) Unplug usb and reboot your phone.
4) Once rebooted, go to the "Play Store" and search for and download "supersu" by "Chainfire" (support him if you can )
5) Once installed run supersu and a window should come up saying to update binaries...well...update them
6) When finished you will now have root, super user control, but outdated "BusyBox".
******* NOTE!!!I have found out that some users were having problems after updating "BusyBox".
Update at your own risk!!!
BTW it worked for me with and without updating so I'm just giving feedback from other users.
7) Use "Play Store" again to download, install, and run "BusyBox" by "Stephen (Stericson)".
a) Let it run until "Smart Install" is finished.
b) Choose "Replace All (Symlinks all)" (not supposed to be able to but it worked for me )
b1) if it doesn't check then don't worry about it. its an extra step
8) Choose "Install" and wait for process to finish.
9) Congratulations! You now have Root, SuperSU, and BusyBox needed to use your phone to its (almost) full potential.
Now onto the Custom Recovery...1) Go to the folder we created (in a land far far away...lol...couldn't help it ) and go into the dual recovery folder.
a) Run "install.bat" and (if we installed SuperSU) choose option #1 (if we installed SuperUser) choose option #2.
b) Follow instructions until you get success message. (see above for freeze or errors fixes at 1-a)
2) Congrats again! this time you now have a dual recovery!
a) I recommend installing "NDRUtils [root]" by "CamberCreek", it makes things much easier with your new found recoveries.
Here is my who's who and thank you's for this post. (this is in order of use in guide not relevance or importance)1) XDA for such a great site!
2) Sony Mobile for a great phone and PC Companion.
3) zxz0O0 for his Easy Root Tool v12.4 without which I would have been lost.
4) [NUT]'s Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip recoveries woot!
5) Chainfire for SuperSU the force in this rooted world.
6) Stephen (Stericson) for BusyBox the gears that keep us going.
7) CamberCreek for NDRUtils [root] making Xperia recoveries easier since....
8) Bin4ry & Androxyde for Flashtool making time travel possible?
9) And anyone else i might have missed.
Hope this helps those that were stuck like myself trying to get my phones true power unlocked!
***** NOTE!!!I'm not sure if its just me/my phone/everyone's phone but i have noticed while working to get adb to recognize my device my usb debugging would seem to not be working (adb devices). If anyone has some feed back about this problem i would love to hear. BTW my device is less then 2 months old.
Click to expand...
Click to collapse
Ugh, where were you when I was stuck on 4.4? :laugh: I ended up downgrading my c6916 to 4.3 when I rooted it, it was the only way I could seem to achieve root. Hopefully this article will help someone out!
I myself haven't experienced any issues with adb/debugging, but maybe it's because I'm on a different os build.
So grateful for the EasyRoot tool!
Glad this could help you and thanks for the feedback
Thank you for this! I just got the lollipop update notification but wanted to double check to see if I could root before updating. Glad I did!
Two questions...
This file.... Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip I cannot find. I can only find the 2.8.15 version. Will that do?
Also... Since I just got the lollipop update. Can I OTA to that and keep root?
silentsnow31802 said:
Thank you for this! I just got the lollipop update notification but wanted to double check to see if I could root before updating. Glad I did!
Two questions...
This file.... Z1-lockeddualrecovery2.8.3-RELEASE.installer.zip I cannot find. I can only find the 2.8.15 version. Will that do?
Also... Since I just got the lollipop update. Can I OTA to that and keep root?
Click to expand...
Click to collapse
Yes, that version is fine and will work. Also, I will update this soon. Just been busy with work so haven't had time as of yet. Also if you update you will loose root and have to start over again. Hope this helped.
So I am stuck..
Hey. So I was on 4.5 Lolipop and decided to follow the guide, the 2nd one first of course. And now I am in a Boot loop. and stuck.
Any suggestions or help ?
BTW i really do not want to wipe everything using the companion software. ...Did not fully back it up :/
me too
dweller02 said:
Hey. So I was on 4.5 Lolipop and decided to follow the guide, the 2nd one first of course. And now I am in a Boot loop. and stuck.
Any suggestions or help ?
BTW i really do not want to wipe everything using the companion software. ...Did not fully back it up :/
Click to expand...
Click to collapse
did you get any solution to stop dat ?
---------- Post added at 01:16 PM ---------- Previous post was at 01:11 PM ----------
theshadower10 said:
Ok, so you updated and now want to root? Well great news! We can get you downgraded to "14.4.B.0.37" so you can rock like the rest of them!
1) Download, install "flashtool.net/downloads.php".
2) Download "storagecow.eu/Xda/Sony/Xperia%20Z1s/C6916_14.4.B.0.37_T-Mobile.ftf".
3) Move "C6916_14.4.B.0.37_T-Mobile.ftf" to folder "C:\Users\(your name)\.flashTool\firmwares".
4) Run "Flashtool" and wait for loading to finish.
a) Connect your device and Flashtool should recognize it and show that it is connected and has debugging turned on.
1a) If debugging is off then go to "Developer Settings" again and turn off then back on the "USB Debugging" option.
b) Click the lightning bolt in the top left area.
c) Choose "Flashmode" and click "Ok".
d) On the left should be the files you moved, choose "", uncheck the "DATA" box on the right side, and lastly choose "Flash".
e) When it says to turn "Off" your device and enter "Flash mode", turn off and wait for the charging screen (if connected still) or it to fully turn off.
f) Disconnect device and hold down "Vol. Down" and plug device back in. When you see your charging lights show/flash a few times you should have a blank screen and no lights.
g) Flashtool should have automatically started flashing now.
h) When finished exit flashmode by removing usb and holding the power button down to turn on. If it dont vibrate after a few seconds just release power and try again.
5) Felicitations! You should not be running "14.4.B.0.37" and are now able to follow above guide!
Click to expand...
Click to collapse
Hey i was running at lollipop 5.0.2.while i was using the second method first my mobile is looping after flashing...kindly tell me a solution
sorry for not a faster response...haven't had internet for awhile
anyways, for above 2 posts...i had updated to 5.0.2 and had to downgrade myself.
i had followed the same thing as above just updated the programs and apps from their respective owners.
i had no issues and have even upgraded back up to 5.0.2 using a different guide found on xda.
cant remember for the life of me what post it was though...
since i still have no internet and am typing this on friends laptop, i would suggest searching for other guides here to find one.
My apologies beforehand: I have Xperia Z1S (C6916, Android 5.0.2, Build #: 14.5.B.0.247), unlocked bootloader, Android Lollipop & would like to root my phone after first downgrading it. Viewing this post, I would like to know where I can get access to the files mentioned in this post. Or am I a year too late?
he has mentioned the links to the files
1)"forum.xda-developers.com/showthread.php?t=2784900" for Easy root tool
(you can even try kingroot "https://kingroot.net/" if you want,i used kingroot to root my Z1)
2) "nut.xperia-files.com/" for XZdualrecovery
3)use playstore for downloading Superuser by chainfire
4)"support.sonymobile.com/us/tools/pc-companion/" for pc companion