Is Using GURU Reset Roms same as USING RUU? - One (M7) Q&A, Help & Troubleshooting

Hello. My firmware is 3.62.401.1, my hboot is 1.55 and im S-ON.
I wanna go to completely stock, but don't care about warranty. Since i have to go S-OFF with rumrunner to use RUU, and im afraid i might brick my device i flashed GURU'S REST ROM matching my firmware. Is this the same as using the RUU, or the RUU so to say, flashes it cleaner ?

Bocko92 said:
Hello. My firmware is 3.62.401.1, my hboot is 1.55 and im S-ON.
I wanna go to completely stock, but don't care about warranty. Since i have to go S-OFF with rumrunner to use RUU, and im afraid i might brick my device i flashed GURU'S REST ROM matching my firmware. Is this the same as using the RUU, or the RUU so to say, flashes it cleaner ?
Click to expand...
Click to collapse
can you post a "fastboot getvar all" (excluding IMEI and s/n)

version: 0.5
version-bootloader: 1.55.0000
version-baseband: 4A.21.3263.04
version-cpld: None
version-microp: None
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
serialno:
imei:
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__102
battery-status: good
battery-voltage: 4001mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-bb768ae1
hbootpreupdate: 11
gencheckpt: 0

Bocko92 said:
Hello. My firmware is 3.62.401.1, my hboot is 1.55 and im S-ON.
I wanna go to completely stock, but don't care about warranty. Since i have to go S-OFF with rumrunner to use RUU, and im afraid i might brick my device i flashed GURU'S REST ROM matching my firmware. Is this the same as using the RUU, or the RUU so to say, flashes it cleaner ?
Click to expand...
Click to collapse
The Guru reset is not as complete as a true RUU but it is very close, close enough in fact you can take OTA after using it. and after the OTA your are indeed completely stock. The guru reset doesn't update your firmware so yeah it's important that you get the correct Reset to match your current firmware.
if this is the one you used you should be good to go
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/

Bocko92 said:
version: 0.5
version-bootloader: 1.55.0000
version-main: 3.62.401.1
version-misc: PVT SHIP S-ON
product: m7_ul
modelid: PN0710000
cidnum: HTC__102
gencheckpt: 0
Click to expand...
Click to collapse
since you dont care about warranty, just go ahead and install http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ using CWM or TWRP
if you want to receive & install OTA updates (when they become available), select "stock recovery" in installer.

nkk71 said:
since you dont care about warranty, just go ahead and install http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/ using CWM or TWRP
if you want to receive & install OTA updates (when they become available), select "stock recovery" in installer.
Click to expand...
Click to collapse
Thanks, i did install it, but i notice some lag when switching between normal notifications and toggles in the notification shade - is it normal ?
P.S I'm a new One user.
Wiped everything when installed the zip. Was just wondering if it cleans everything properly so the normal perfromance of the phone is achieved or i must play with the RUU.exe .. and S-OFF. I'd like to be completely stock since im sick of modding my phone .. and once i S-OFF i dont know how to S-ON.

Bocko92 said:
Thanks, i did install it, but i notice some lag when switching between normal notifications and toggles in the notification shade - is it normal ?
P.S I'm a new One user.
Wiped everything when installed the zip. Was just wondering if it cleans everything properly so the normal perfromance of the phone is achieved or i must play with the RUU.exe .. and S-OFF. I'd like to be completely stock since im sick of modding my phone .. and once i S-OFF i dont know how to S-ON.
Click to expand...
Click to collapse
1- if you ever decide to go S-Off then DO NOT GO BACK S-ON
2- you are now completely stock (your firmware is 3.62.401.1, and since you dont have s-off it's the official one), and the Guru Reset has put your ROM back to 100% stock -> so performance, etc. is 100% stock
3- you won't get it any different with an RUU (performance and experience)
4- you could try a factory reset, to clean everything and set up your phone from the beginning

Do you think it's worth it to go through the trouble of S-OFF-ing just to use the RUU, or the phone's just fine with the .zip. I'm kinda of perfectionist - i want to do it right and never bother again with flashing and modding?
Thanks again!

Bocko92 said:
Do you think it's worth it to go through the trouble of S-OFF-ing just to use the RUU, or the phone's just fine with the .zip. I'm kinda of perfectionist - i want to do it right and never bother again with flashing and modding?
Thanks again!
Click to expand...
Click to collapse
you're phone is 100% stock right now; the only advantages of going to S-Off and (eventually) run an RUU is if you need your bootloader to say "LOCKED" as opposed to UNLOCKED/RELOCKED.

It still says that my device's been tempered with, is that normal?

Bocko92 said:
It still says that my device's been tempered with, is that normal?
Click to expand...
Click to collapse
That's a so-so question, in theory it should go away once stock recovery has been installed, but in practice i've seen it sometimes go away and sometimes not, even when 100% stock.

Bocko92 said:
It still says that my device's been tempered with, is that normal?
Click to expand...
Click to collapse
nkk71 said:
That's a so-so question, in theory it should go away once stock recovery has been installed, but in practice i've seen it sometimes go away and sometimes not, even when 100% stock.
Click to expand...
Click to collapse
The Tampered and unlock/relock can be removed it you use nkk71 full Superguide for returning to stock >> http://forum.xda-developers.com/showthread.php?t=2541082
but it's a lot of work just to remove some red text on a screen you rarely ever see

If i want to use RUU do i have to first flash hboot 1.44 ? wont it break something with my firmware version?

Bocko92 said:
If i want to use RUU do i have to first flash hboot 1.44 ? wont it break something with my firmware version?
Click to expand...
Click to collapse
no it won't break anything in firmware, it will just downgrade hboot to allow RUU to work and "fastboot boot <name of recovery>.img" to work.
but if you're on Win8 / 8.1 that's gonna be an issue cause it will likely break fastboot & adb. better to use Win7 WinXP or even Ubuntu Live USB if you can't get your hands on Win7 or XP
EDIT: remember you have to be S-OFF !!!

I just s-offed ! Thanks again mate, i cant really thank you enough for your help!
Atm i just have windows 8.1, can i use it or i must install 7 somehwhere?
btw im on 8.1 atm and fastboot and adb works fine? or it's a issue with the 1.44 hboot?

Bocko92 said:
I just s-offed ! Thanks again mate, i cant really thank you enough for your help!
Atm i just have windows 8.1, can i use it or i must install 7 somehwhere?
btw im on 8.1 atm and fastboot and adb works fine? or it's a issue with the 1.44 hboot?
Click to expand...
Click to collapse
yeah, you're (very likely) going to have issues with win 8.1, better to get Win7 or an Ubuntu Live USB
do you have a win7 pc around somewhere handy? (cause it's not worth installing, better to "Try Ubuntu" Live USB)

Bocko92 said:
I just s-offed ! Thanks again mate, i cant really thank you enough for your help!
Atm i just have windows 8.1, can i use it or i must install 7 somehwhere?
btw im on 8.1 atm and fastboot and adb works fine? or it's a issue with the 1.44 hboot?
Click to expand...
Click to collapse
yes it the combination of win 8.1 and hboot 1.44.000 that will give you the problem

nkk71 said:
yeah, you're (very likely) going to have issues with win 8.1, better to get Win7 or an Ubuntu Live USB
do you have a win7 pc around somewhere handy? (cause it's not worth installing, better to "Try Ubuntu" Live USB)
Click to expand...
Click to collapse
Okay, im on windows 7, im S-OFF and my bootloader is unlocked but when i try to flash it it fails -
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.250s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 0.733s

Bocko92 said:
Okay, im on windows 7, im S-OFF and my bootloader is unlocked but when i try to flash it it fails -
target reported max download size of 1526722560 bytes
sending 'zip' (501 KB)...
OKAY [ 0.250s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 0.733s
Click to expand...
Click to collapse
looks like android-info.txt is actually a little messed up in there
Code:
cidnum: HTC__E11cidnum: HTC__102
^^ line break missing.
, so just temporarily change CID to 11111111
fastboot oem writecid 11111111 <- 8 ones
then do the downgrade hboot, then restore cid
fastboot oem writecid HTC__102
and continue.

CANNOT THANK YOU ENOUGH KIND SIR ! I'm finally back to stock and locked. Really dude, you saved me there .. much love.
P.S No homo

Related

[Q] Custom Rom/Recovery w/o tampered message?

Hello.
I just got my One, upgraded from the One X
I am very skilled regarding rooting, flashing custom roms, recoveries, etc. I just have a quick question.
Is it possible to install custom rom, custom recovery and turn the phone S-OFF - WITHOUT getting the tampered message?
- If no, tell me that
- If yes, read on
Second case: Does this RRU match my M7?
First of all, what have i done myself:
- Unlocked bootloader
- Installed TWRP
- Made a nandroid backup
- Relocked bootloader because i want to flash [ROM] Android Revolution HD 3.2 Google Edition | High Quality & Performance | Android 4.3 Jelly Bean | 2.14.1700.15
- Flashed latest firmware for my phone - 2.24.401.1 (the thread above states that its not needed but recommended)
- Got the TAMPERED message and wants to get rid of that (and return from HBOOT 1.54 to original HBOOT 1.44)
In order to get rid of that message, this guide state i must use "method 2", and as part of that method 2, i must find the correct RRU.
The following is the output of getvar all before firmware update:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3980mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.043s
Click to expand...
Click to collapse
And this is getvar all after firmware update:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4010mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.043s
Click to expand...
Click to collapse
Will this RRU be for my phone: RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe
- I found it here: http://www.androidruu.com/index.php?developer=M7
I chose it as its the RRU for the M7 Europe model that gets closest to my original main version (1.29.401.16 vs 1.28.401.7), also the radio in that RRU is just a tad older than my own original radio.
Also, is it possible to downgrade like that (im quite certain it is, just want to be sure).
Kind Regards
TwinAdk
Wait, you was in 1.44 hboot and now you're on 1.54?
If yes, you can't get the s-off.
The tools for the S-OFF are working only in 1.44 hboot, and, i if read right, now you have the 1.54 and you can do nothing...
****, you are kidding me, right? And RUU downgrade is not an option? That will downgrade my RUU too.
Aside from S-OFF being down the toilet, are there any other downsides to Hboot 1.54?
TwinAdk said:
****, you are kidding me, right? And RUU downgrade is not an option? That will downgrade my RUU too.
Aside from S-OFF being down the toilet, are there any other downsides to Hboot 1.54?
Click to expand...
Click to collapse
You can't downgrade with any ruu if you don't have the S-OFF...
Nope, but now you can't remove the ****Tampered**** line and you can't get the S-OFF...
Guich said:
You can't downgrade with any ruu if you don't have the S-OFF...
Nope, but now you can't remove the ****Tampered**** line and you can't get the S-OFF...
Click to expand...
Click to collapse
God dammit.. Well, are there any downsides regarding custom roms, to having the 1.54 hboot? Also, is it likely S-OFF will ever be avail. with 1.54?
TwinAdk said:
God dammit.. Well, are there any downsides regarding custom roms, to having the 1.54 hboot? Also, is it likely S-OFF will ever be avail. with 1.54?
Click to expand...
Click to collapse
No, you can flash all rom, kernel, mod, theme that you want.
For the S-OFF, no, devs said that they will work on the tool for the S-OFF when the new update form htc will come with the 1.55 hboot
Guich said:
No, you can flash all rom, kernel, mod, theme that you want.
For the S-OFF, no, devs said that they will work on the tool for the S-OFF when the new update form htc will come with the 1.55 hboot
Click to expand...
Click to collapse
So when 1.55 hboot arrives, work will start for S-OFF for that HBOOT? Any ETA on 1.55?
TwinAdk said:
So when 1.55 hboot arrives, work will start for S-OFF for that HBOOT? Any ETA on 1.55?
Click to expand...
Click to collapse
Atm there are some leaks of android 4.3 and new hboot 1.55, but this isn't the update that we will get.
For the question, yes
Guich said:
Atm there are some leaks of android 4.3 and new hboot 1.55, but this isn't the update that we will get.
For the question, yes
Click to expand...
Click to collapse
Okay, thanks
Now that i booted the phone, my storage is not available and wifi does not turn on (it says enabling, but thats all) - great start! Any idea why?
Ill look into it tomorrow my self, im off to bed now... Guess the One X will be in service for a few more days...
EDIT: Im on a firmware thats NOT for the android version i have, i think thats the problem. I guess ill have to sideload the custom rom running 4.3, and get it running that way.
Freaking hell, no S-OFF!
You relocked your bootloader after the flash of the rom?
If yes, you have to unlock this, reflash the rom and the kernel, and do a wipe of cache and dalvik-cache...
Guich said:
You relocked your bootloader after the flash of the rom?
If yes, you have to unlock this, reflash the rom and the kernel, and do a wipe of cache and dalvik-cache...
Click to expand...
Click to collapse
I cannot flash the rom as my SD is unavail... Is it an option to sideload the ROM?
TwinAdk said:
I cannot flash the rom as my SD is unavail... Is it an option to sideload the ROM?
Click to expand...
Click to collapse
Flash the stock recovery and then do a factory reset in bootloader, this will fix your sd.
After flash a custom recovery and try to use the sideload
Guich said:
Flash the stock recovery and then do a factory reset in bootloader, this will fix your sd.
After flash a custom recovery and try to use the sideload
Click to expand...
Click to collapse
Hello.
I flashed the stock recovery, and factory reset the phone. It rebooted during factory reset (of course), and booted normally afterwards. Wifi and storage did however still not work.. From within android im told that the storage is "Unavailable" (ill post screenshots later) - and from TWRP, i am told that i have "Internal storage" of 28xxx mb available (not sure about the excact size, around 28 gb) - but i cannot mount it and make it available from windows.
I can see the phone in windows, as a HTC media unit, and browse the content (storage -> legacy -> more folders -> root of SD card with folders like "downloaded" etc - default folders). But when i get there i cannot create folders or files, i can only view the content.....?
1. I cannot downgrade with RRU, since im S-ON
2. My Wifi and storage SEEMS broke (i suspect its because i flashed the firmware mentioned earlier, and my android version is not happy with that firmware - someone with more insight are welcome to comment on my guessing here)
3. Sideloading the rom i want to use (based on android 4.3) seems to be the only option - but can i sideload when my SD is not available in recovery?
Starting to worry a bit here
And thank you for all your help so far :good: I didnt get to say that last evening.. Appriciate!
Kind Regards
Hello sir,
first of all, let me say you screwed up already when not researching XDA before doing an update. Since i have done so myself numerous times, let me advise you to make it a habit, when buying a new phone to specifically research downsides of updates before accepting any.
Particularly in the HTC world, it has become a common thing to only gain S-OFF while the phone is in early software states and loose this ability towards later releases. Until now, many HTC phones i have had to deal with, had issues with disabling security on later firmwares.
Then, the storage problem you describe could possibly be related to something i have seen a fair few times. What Guich told you to do is usually the ultimate trick to get it back working. But let me ask this first: were you able to access storage from windows normally before the update? Or could you also face a driver issue?
OK. Guich's comment did not help. You flashed the stock recovery from the firmware you run. Then you ran Factory Reset from within Bootloader? Or from within android? If the latter, try the first...
I will be putting up stock recoveries from different RUU's soon on my thread here: http://forum.xda-developers.com/showthread.php?t=2316726 but you also find them on the forum already by searching. Try different stock recoveries and factory reset from Bootloader.
Then, if that doesn't help, try to run the OTA 2.24 (which already runs on your phone!) again by booting into bootloader, then picking "Fastboot" there (use volume down and up to navigate and power to confirm) and then going to your adb/fastboot with a command window. Oh, connect phone to PC of course
Lets say you have adb and fastboot plus the dll files in C:\Android. Open a CMD window and do "CD C:\Android" to go there.
there, run "fastboot oem rebootRUU" (type exactly as i do here, omit the quotes though).
then, copy and paste the OTA file (obtain HERE) to the same folder (C:\Android).
For easier typing in CMD, rename the OTA to something short and simple like test.zip or whatever.
then go back to your CMD Window and type in "fastboot flash zip test.zip"
Since its the same hboot and firmware in the OTA like you have on phone and since this package is official and signed, your phone ---should--- accept the flash. If not (maybe because you got the wrong model ID or wrong CID) i wouldn't really know how to proceed. But you DID accept that OTA before so it MUST be for your phone or else it wouldn't have flashed in the first place.
If it flashes fine, boot your phone up and check if it fixed everything.
If not, run the check for software update in Settings/Info/ and see if there is already an official OTA for your phone available that brings you past the 2.24. If not, download one of the inofficial OTA's and --- hope --- that you can flash it. Like 3.18 or 3.22. The first is for Asia/Taiwan though and will almost certainly NOT flash on your phone and the second is BrightstarUS and for the DEV edition and will also almost certainly not flash. But its worth a try.
beyond that, i have no more valuable tips. Only thing I would try is to flash CWM and do a clear storage, wipe data, wipe everything there. But be sure to have your nandroid ready if you do that. CWM uses a slightly different formatting method so it could possibly correct issues. In the past, i have read about screwed up SDcards related to CWM formatting more often than those that got screwed up by TWRP though. So its not exactly ideal to play with CWM on a phone that has already issues with its partition. But if i was desperate, i would do it anyway.
If that doesnt help or make it worse, do the very same thing on TWRP, pick the "wipe Data" option which prompts you to type "yes" into an input line. This will once again format your SD with a different method. It could possible correct this problem.
DO NOT attempt to screw around with the SD Partition using tools like MiniTool or EASUS if you can access the sd from them at all!
The SD Card is an EXT4 file system and cannot be formatted with FAT or NTFS from windows. If you do that, the phone wont work at all anymore. The exact parameters to format the partition externally are not known to me and i doubt you can address the partition from within windows at all. Maybe it works under linux...
Sorry. Cant be much help here. If that all doesnt work, just flash stock recovery back and restore your stock nandroid and send it in for repair. Them service dudes will have the right RUU and fix it for you.
[EDIT]
Oh and before i forget: if you can fix it with these tips, you owe me one
You have to flash Team Venom's ViperOne then instead of ARHD! :laugh:
Aroma installer is running now!! So excited to see the result! I sideloaded the zip, via adb sideload Nice short article on it here: http://teamw.in/ADBSideload
Will return with outcome :highfive::fingers-crossed::fingers-crossed::fingers-crossed:
EDIT: Its back! Running custom rom with sd card avail and wifi working! Pew, saved by adb sideload, increddible!

HELP! HTC One will not flash RUU. Stuck on fastboot flash zip ruu.zip

I followed all the directions on relocking and unrooting my One back to factory settings and when I made it to the last step it keeps failing on me.
sending 'zip' (243622 KB)...
OKAY [ 9.533s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 33.051s
That's what it keeps saying to me. What should I do???
Kenmaster828 said:
I followed all the directions on relocking and unrooting my One back to factory settings and when I made it to the last step it keeps failing on me.
sending 'zip' (243622 KB)...
OKAY [ 9.533s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 33.051s
That's what it keeps saying to me. What should I do???
Click to expand...
Click to collapse
Why are you using a zip? Can't you use the exe RUU? Obviously has to be for your CID and MID. Check on androidruu.com if you can find one.
nkk71 said:
Why are you using a zip? Can't you use the exe RUU? Obviously has to be for your CID and MID. Check on androidruu.com if you can find one.
Click to expand...
Click to collapse
There was no .exe for my version.
I'm on the Sprint 1.31.651.2 version
Kenmaster828 said:
There was no .exe for my version.
I'm on the Sprint 1.31.651.2 version
Click to expand...
Click to collapse
to flash a RUU.zip you need to be in RUUmode (command: fastboot oem rebootRUU) and you'll need S-OFF.
herwegan said:
to flash a RUU.zip you need to be in RUUmode (command: fastboot oem rebootRUU) and you'll need S-OFF.
Click to expand...
Click to collapse
So I basically screwed myself when I reverted back to S-ON.
Kenmaster828 said:
So I basically screwed myself when I reverted back to S-ON.
Click to expand...
Click to collapse
Are you still on hboot 1.44? Then get S-Off again.
nkk71 said:
Are you still on hboot 1.44? Then get S-Off again.
Click to expand...
Click to collapse
I just got back on S-OFF. I am a happy camper
Kenmaster828 said:
I just got back on S-OFF. I am a happy camper
Click to expand...
Click to collapse
:laugh::good:
IMHO, keep S-Off no matter what, even if you have to return it for warranty (hopefully not) or even sell it. some phones are actually shipped with S-Off and (from what I've read) it's very difficult to say that you "tampered" with your phone because you have s-off. several people (on the posts) have returned their phones to service center for repair, and got them back s-off again. no complaints, unless it said RELOCKED, UNLOCKED, or TAMPERED in the bootloader. S-Off is OK.
now you can go ahead and get it back to stock.
nkk71 said:
:laugh::good:
IMHO, keep S-Off no matter what, even if you have to return it for warranty (hopefully not) or even sell it. some phones are actually shipped with S-Off and (from what I've read) it's very difficult to say that you "tampered" with your phone because you have s-off. several people (on the posts) have returned their phones to service center for repair, and got them back s-off again. no complaints, unless it said RELOCKED, UNLOCKED, or TAMPERED in the bootloader. S-Off is OK.
now you can go ahead and get it back to stock.
Click to expand...
Click to collapse
Last time I tried using Sprint 1.31.651.2, now that I am on S-OFF, can I use 1.29.651 version since that is a .exe version instead of a .zip version? I'm also asking this so I can strictly follow QBKING77's tutorial on going back to stock.
Kenmaster828 said:
Last time I tried using Sprint 1.31.651.2, now that I am on S-OFF, can I use 1.29.651 version since that is a .exe version instead of a .zip version? I'm also asking this so I can strictly follow QBKING77's tutorial on going back to stock.
Click to expand...
Click to collapse
Don't know "QBKING77's tutorial", but you can use pretty much any RUU now that you're S-Off. Downgrading is possible thanks to S-Off. Just stick to SPRINT RUUs, ROMs etc, as I understand they (and possibly Verizon) are different from other carriers.
And remember to keep S-Off, that will always allow you to downgrade if needed or flash firmware, etc.
How do you get S-Off after custom ROM
So I'm also getting the "12 signature verify fail" the OP was getting... I don't have (never have had) S-Off. I htcdev unlocked and rooted by AT&T HTC One and put the GPe ROM on it... now I'm trying to go back to stock. Can't run the RUU w/o S-Off apparently, but also apparently can't get S-Off with this ROM? Halp! How do I get out of this situation?
---------- Post added at 09:51 PM ---------- Previous post was at 09:10 PM ----------
I figured it'd be good to provide more info..
C:\and\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34NW******
(bootloader) imei: *********************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4279mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status malformed (0 bytes))
finished. total time: 5.554s
I have tried the 502.12 and 502.15 "cingular" RUU (ZiIPs and EXEs), to no avail.
Can't revone (get "error code = 1" [not -1]), so I can't seem to get S-Off. Moonshine fails in test 2.1 (between reboots basically).
Any ideas?
Have you tried to install viper or ARHD and get S-off again?
michaeljthom said:
So I'm also getting the "12 signature verify fail" the OP was getting... I don't have (never have had) S-Off. I htcdev unlocked and rooted by AT&T HTC One and put the GPe ROM on it... now I'm trying to go back to stock. Can't run the RUU w/o S-Off apparently, but also apparently can't get S-Off with this ROM? Halp! How do I get out of this situation?
---------- Post added at 09:51 PM ---------- Previous post was at 09:10 PM ----------
I figured it'd be good to provide more info..
C:\and\platform-tools>fastboot getvar all
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-ON
Any ideas?
Click to expand...
Click to collapse
Check the date in bootloader; if it's before June 2013, then revone should work. If the date is June or after then it's a patched hboot 1.44, and you need to downgrade before running revone, check this thread it has the downgrade instruction (T-Mob and ATT only): http://forum.xda-developers.com/showthread.php?t=2431515
and remember you need to be on a Sense 5, 4.1.2 based ROM.
nkk71 said:
and remember you need to be on a Sense 5, 4.1.2 based ROM.
Click to expand...
Click to collapse
So this is part of what I'm struggling with... It seems I can't get S-Off without being on a Sense 5/4.1.2 ROM, but how can I get that ROM loaded without S-Off? All the "stock" images I've found seem to all be RUUs or otherwise not work with S-On. What am I missing here?
michaeljthom said:
So this is part of what I'm struggling with... It seems I can't get S-Off without being on a Sense 5/4.1.2 ROM, but how can I get that ROM loaded without S-Off? All the "stock" images I've found seem to all be RUUs or otherwise not work with S-On. What am I missing here?
Click to expand...
Click to collapse
1- first thing, did you check the bootloader date? if it's the patched 1.44 (ie June 2013 or after) then if you do the downgrade (only for ATT and T-Mobile), I think that also includes the ROM.
2- and just to get a Sense 5/4.1.2 based ROM on your phone, you just flash it through custom recovery (any custom or stock ROM will do), if you can't find one I'll PM you a link to one that worked for me, but first check point 1
Thanks nkk71... So yeah, hboot, while v. 1.44, is dated Jul 5, 2013. So it looks like I need to downgrade that. But as you note, that link says I have to be on a stock Sense 5 ROM. I have found a TMO Germany rom, but I haven't yet found an AT&T one.
michaeljthom said:
Thanks nkk71... So yeah, hboot, while v. 1.44, is dated Jul 5, 2013. So it looks like I need to downgrade that. But as you note, that link says I have to be on a stock Sense 5 ROM. I have found a TMO Germany rom, but I haven't yet found an AT&T one.
Click to expand...
Click to collapse
I just took a quick look at the ATT downgrade guide and the first thing it asks (actually point 3) is to install a nandroid backup, that will put the correct Sense 5 ROM on your phone, no need to go look for one.
Hit the thanks button if I've helped
Score. Thanks so much. I think finding a nandroid backup (and then switching to cwm from twrp) was really the key here. But I'm now all fully restored to stock. Thanks again!!
Can someone link me to a thread or video on how to go to S-off, I don't have any rom installed and I can't go back in to recovery.
Hope I'm not screwed
LMH1998 said:
Can someone link me to a thread or video on how to go to S-off, I don't have any rom installed and I can't go back in to recovery.
Hope I'm not screwed
Click to expand...
Click to collapse
same problem . Please help!

Unable to unlock relocked hboot

I re-locked my phone with a custom recovery and attempted to unlock again and goes through successful though the unlock screen does not show up.(Probably because I have no OS installed?)
Code:
fastboot flash unlocktoken unlock_code.bin
target reported max download size of 1526722560 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check [COLOR="DeepSkyBlue"]successfully[/COLOR]
OKAY [ 0.003s]
finished. total time: 0.144s
My current information is:
*** Tampered ***
*** RELOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4T.21.3218.21
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Code:
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: XXXXXXXXXXXX
imei: XXXXXXXXXXXXXX
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum:[COLOR="DeepSkyBlue"]GOOGL001[/COLOR]
battery-status: good
battery-voltage: 4288mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: dirty-5d4c562c
hbootpreupdate: 11
gencheckpt: 0
Ive tried the method below with a few RUU's though I keep getting the error "FAILED (remote: 12 signature verify fail)" Their must some RUU that I can flash that correlates to my above information?
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip <path to zip>
Code:
C:\Users\chanik\Desktop\adt-bundle-windows-x86_64-20130917\sdk\platform-tools>fa
stboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (388870 KB)...
OKAY [ 15.220s]
writing 'zip'...
(bootloader) signature checking...
[COLOR="Red"]FAILED (remote: 12 signature verify fail)[/COLOR]
finished. total time: 53.263s
If someone could confirm I have fully bricked my device that be great so i can move on with my life
I foundout that i dont have a mainvar... is tjis bad?
ronniereiff said:
I foundout that i dont have a mainvar... is tjis bad?
Click to expand...
Click to collapse
Did you say custom recovery? Which one, I'll post instructions to unlock when I'm on my pc...
Sent from my HTC One using Tapatalk
nkk71 said:
Did you say custom recovery? Which one, I'll post instructions to unlock when I'm on my pc...
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Twrp, though i am unable to use it due to being relocked..
ronniereiff said:
Twrp, though i am unable to use it due to being relocked..
Click to expand...
Click to collapse
oh, just saw you're s-on, oops.
do you have the GPE bootloader or Sense bootloader? have you tried "fastboot oem unlock"
edit: also what are you trying to flash, link please
nkk71 said:
oh, just saw you're s-on, oops.
do you have the GPE bootloader or Sense bootloader? have you tried "fastboot oem unlock"
edit: also what are you trying to flash, link please
Click to expand...
Click to collapse
I have the GPE bootloader, really im trying to flash anything that will make my phone functional again.
Ive tried many zips from the htc one collection thread
ronniereiff said:
I have the GPE bootloader, really im trying to flash anything that will make my phone functional again.
Ive tried many zips from the htc one collection thread
Click to expand...
Click to collapse
have you tried "fastboot oem unlock"?
also check this: http://forum.xda-developers.com/showthread.php?p=48195194#post48195194 (read through the thread, to make sure it applies to you).
nkk71 said:
have you tried "fastboot oem unlock"?
also check this: http://forum.xda-developers.com/showthread.php?p=48195194#post48195194 (read through the thread, to make sure it applies to you).
Click to expand...
Click to collapse
Fastboot oem unlock does not work, ill try to flash an older hboot in ruu mode tomorrow though i have a feeling signiture check will fail.
ronniereiff said:
Fastboot oem unlock does not work, ill try to flash an older hboot in ruu mode tomorrow though i have a feeling signiture check will fail.
Click to expand...
Click to collapse
or use a same or higher version RUU, that should work; with s-on downgrade not possible, but same version or higher RUU will work.
nkk71 said:
or use a same or higher version RUU, that should work; with s-on downgrade not possible, but same version or higher RUU will work.
Click to expand...
Click to collapse
When you say version im guessing you are referring to mainver, a varible that comes back empty in fastboot. Mmy phhone has no mainver and idk why.
ronniereiff said:
When you say version im guessing you are referring to mainver, a varible that comes back empty in fastboot. Mmy phhone has no mainver and idk why.
Click to expand...
Click to collapse
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
nkk71 said:
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
Click to expand...
Click to collapse
I have successfully unlocked after flashing the 3.58.1700.5 kitkat firmware Just need to see how to get kitkat now
nkk71 said:
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
Click to expand...
Click to collapse
So my current mainver is 3.06.1700.10, hboot 1.54.000, radio 4A.18.3263.15, cidnum: GOOGL001,modelid: PN0712000 with s-on
I tried installing roms on twrp recovery but everything is failing and cache unable to mount every time and i have to wipe it over and over to get it to mount. Any idea whats going on? ive tried formating everything.
ronniereiff said:
So my current mainver is 3.06.1700.10, hboot 1.54.000, radio 4A.18.3263.15, cidnum: GOOGL001,modelid: PN0712000 with s-on
I tried installing roms on twrp recovery but everything is failing and cache unable to mount every time and i have to wipe it over and over to get it to mount. Any idea whats going on? ive tried formating everything.
Click to expand...
Click to collapse
Cache unable to mount is ok, it's because it's wiped, so don't worry about that.
To be able to flash a 4.4 ROM, you need TWRP 2.6.3.3 or above, but since you're S-On you cannot flash a GPE 4.4 ROM as they require S-Off.
Use adb sideload, adb push, or OTG cable to get a ROM to TWRP.
Hit the thanks button if i've helped
nkk71 said:
Hit the thanks button if i've helped
Click to expand...
Click to collapse
After finally getting my phone fully working with 4.4. I have came onto XDA Forms to do just that, you have helped me out a lot, thank you!
Ronnie Reiff
ronniereiff said:
After finally getting my phone fully working with 4.4. I have came onto XDA Forms to do just that, you have helped me out a lot, thank you!
Ronnie Reiff
Click to expand...
Click to collapse
Can you post where did you get the rom you flashed?

[Q] HTC One unlocked, tampered, S-ON and custom recovery - Can I do OTA

Hi,
I have an HTC One PN07120. It is unlocked, tampered S-ON, has custom recovery installed, and is running AT&T 4.3 JellyBean stock.
In a few days Sense 6.0 OTA update will become available for my device, so I was wondering if I can just normally run the setup and update my system or I have to relock my device or something?
PLEASE RESPOND
Torcidas1950 said:
PLEASE RESPOND
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
+ you need stock recovery, ota update will not flash using a custom recovery.
PLEASE SEARCH
alray said:
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
+ you need stock recovery, ota update will not flash using a custom recovery.
PLEASE SEARCH
Click to expand...
Click to collapse
So if I got you right, only thing that matters is that I have stock recovery instead of custom recovery. And how do I do that?
Torcidas1950 said:
So if I got you right, only thing that matters is that I have stock recovery instead of custom recovery.
Click to expand...
Click to collapse
Well yes and no, it depend what you did with your phone, read the link I have posted above, will not write all again
And how do I do that?
Click to expand...
Click to collapse
flash stock recovery the same way you have flashed a custom one
Code:
fastboot flash recovery name_of_recovery.img
you need the recovery that match your present firmware #
Torcidas1950 said:
Hi,
I have an HTC One PN07120. It is unlocked, tampered S-ON, has custom recovery installed, and is running AT&T 4.3 JellyBean stock.
In a few days Sense 6.0 OTA update will become available for my device, so I was wondering if I can just normally run the setup and update my system or I have to relock my device or something?
PLEASE RESPOND
Click to expand...
Click to collapse
You should be fully stock, including recovery, before taking an OTA, except that you can (and should) stay s-off and unlocked. You may not even get the OTA otherwise.
So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?
iElvis said:
You should be fully stock, including recovery, before taking an OTA, except that you can (and should) stay s-off and unlocked. You may not even get the OTA otherwise.
Click to expand...
Click to collapse
alray said:
Well yes and no, it depend what you did with your phone, read the link I have posted above, will not write all again
flash stock recovery the same way you have flashed a custom one
Code:
fastboot flash recovery name_of_recovery.img
you need the recovery that match your present firmware #
Click to expand...
Click to collapse
So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?
Torcidas1950 said:
So I think I have found the stock recovery needed for my device. Now there is a small problem, I have 2 stock recovery files for my device and I do not know wich one to choose because when I typed "fastboot getvar all" I didn't find any information at "version main", just blank space. How should I know wich one to pick?
Click to expand...
Click to collapse
post your "fastboot getvar all" (excluding IMEI and s/n)
nkk71 said:
post your "fastboot getvar all" (excluding IMEI and s/n)
Click to expand...
Click to collapse
Here it is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3894mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Torcidas1950 said:
Here it is:
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) commitno-bootloader: dirty-2da61e5e88
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
did you change radio?
hboot 1.55 + MID + CID would indicate you are on 3.xx.502.x version
so i guess: http://d-h.st/D8F or http://d-h.st/6bH would be a suitable recovery, but you need to have your phone's ROM 100% stock
nkk71 said:
did you change radio?
hboot 1.55 + MID + CID would indicate you are on 3.xx.502.x version
so i guess: http://d-h.st/D8F or http://d-h.st/6bH would be a suitable recovery, but you need to have your phone's ROM 100% stock
Click to expand...
Click to collapse
Well, the guy who fixed my phone from a bootloop and bricked state said he has done the s-off, found a suitable stock RUU and installed, then he put S-ON back and unlocked bootloader if I decide to do any mods in the future.
Torcidas1950 said:
Well, the guy who fixed my phone from a bootloop and bricked state said he has done the s-off, found a suitable stock RUU and installed, then he put S-ON back and unlocked bootloader if I decide to do any mods in the future.
Click to expand...
Click to collapse
1- If you are 100% stock then Settings -> About should also show your correct version number
2- you rooted the phone, so that may or may not have changed some system files, so OTA may not work
3- once S-Off stay S-Off, my personal opinion
In my humble opinion, three choices really, when it comes to "modding" or not your phone:
A) stay stock and don't mess with it to get OTAs
B) you cannot achieve S-OFF (due to newer hboots, or device problems) -> fine live with an unlocked bootloader, and accept the fact that you cannot install OTAs .... you can however "download and install later" the OTA, then pull it to your phone, and use the signed firmware.zip in it
C) you can achieve S-OFF and want to mod your phone -> then do it, get S-Off and enjoy the freedom (but don't flash things not meant for your phone!! this goes for S-On too)
Of course you're going to say that "but S-Off is dangerous", it's a double edged sword... sometimes you are able save your phone thanks to S-Off, and sometimes you can brick it completely.
But then again, you can easily brick an S-On phone too (especially one that is modded), and much more difficult to save than an S-Off phone.
^^ All that is my personal opinion, and I'm not suggesting you S-Off, but if you want to mod your phone (whether S-On or S-Off), you need to be aware of what may, or may not, go wrong, and have done some reading and research
Good Luck
Well, its not worth it. I wont risk bricking my phone again
Torcidas1950 said:
Hi,
I have an HTC One PN07120. It is unlocked, tampered S-ON, has custom recovery installed, and is running AT&T 4.3 JellyBean stock.
In a few days Sense 6.0 OTA update will become available for my device, so I was wondering if I can just normally run the setup and update my system or I have to relock my device or something?
PLEASE RESPOND
Click to expand...
Click to collapse
Torcidas1950 said:
Well, the guy who fixed my phone from a bootloop and bricked state said he has done the s-off, found a suitable stock RUU and installed, then he put S-ON back and unlocked bootloader if I decide to do any mods in the future.
Click to expand...
Click to collapse
Torcidas1950 said:
Well, its not worth it. I wont risk bricking my phone again
Click to expand...
Click to collapse
Those are completely rhetorical highlights, so you can disregard :cyclops:
Good luck, enjoy, and let us know how the OTA update goes
nkk71 said:
Those are completely rhetorical highlights, so you can disregard :cyclops:
Good luck, enjoy, and let us know how the OTA update goes
Click to expand...
Click to collapse
I will if I eventualy decide to do it, so one last question: can I damage my phone in any way if I try flashing stock reckovery?
Thank you so much for all the information you have given me
Torcidas1950 said:
I will if I eventualy decide to do it, so one last question: can I damage my phone in any way if I try flashing stock reckovery?
Thank you so much for all the information you have given me
Click to expand...
Click to collapse
That's a tough one... cause even if you manage to pull out the cable, at exactly the right (ie wrong) moment while flashing recovery, it wouldn't affect bootloader... and with a good bootloader (hboot, and some other variables) you should be able to revive your phone.... now mess with hboot, and that's a whole different story!!
As I said, this is my personal opinion, so maybe get some second opinions on the subject... I can only answer on what i've done, seen, experienced, fixed, not fixed, etc.
Maybe someone wiser will add his/her opinion to this
nkk71 said:
That's a tough one... cause even if you manage to pull out the cable, at exactly the right (ie wrong) moment while flashing recovery, it wouldn't affect bootloader... and with a good bootloader (hboot, and some other variables) you should be able to revive your phone.... now mess with hboot, and that's a whole different story!!
As I said, this is my personal opinion, so maybe get some second opinions on the subject... I can only answer on what i've done, seen, experienced, fixed, not fixed, etc.
Maybe someone wiser will add his/her opinion to this
Click to expand...
Click to collapse
Well, I am not planing to unplug the cable haha.. well if someone else knows please tell, the update is coming soon so I would like to know, but if its risky, there is no way I'm doing it
Torcidas1950 said:
but if its risky, there is no way I'm doing it
Click to expand...
Click to collapse
I hope you have a sense of humour, so no offense meant, but... why did the chicken cross the street (and was it risky?)
Wish you all the best
nkk71
nkk71 said:
I hope you have a sense of humour, so no offense meant, but... why did the chicken cross the street (and was it risky?)
Wish you all the best
nkk71
Click to expand...
Click to collapse
So, yesterday the OTA was finally released, and today I have flashed stock recovery... Now waiting for the OTA notification to come
Sent from my HTC One using XDA Free mobile app
hello guys,
i did a deep search, but nothing found about it, or found but did not understood, so i will ask you. if in my stock recovery it also says (TAMPER), will be possibly to instal OTA?
L.E. - rest is like the title of the topic - Unlocked, S-ON, tampered..

[Q] Can't S-ON?

After the struggle of finding a way to revert my Vodafone Australia branded HTC One back to it's former, virgin glory..
I have finally locked the bootloader, set my CID back and got a stock ROM and recovery - thanks to Guru Stock Reset ROMs, which is the closest thing I could get to being stock as there are no available RUU's.
But the last and final hurdle is S-ON. My Googling tells me all it takes is this fastboot command: "fastboot oem writesecureflag 3"
But when I throw that in a command prompt, all I get is an error:
(bootloader) partition hboot signature error
(bootloader) writesecureflag: partitions siganture failed
OKAY [ 1.624s]
finished. total time: 1.625s
Could anyone please help? I have to return my diseased pink/purple-tinted, crappy camera issue!
Jikstah said:
After the struggle of finding a way to revert my Vodafone Australia branded HTC One back to it's former, virgin glory..
I have finally locked the bootloader, set my CID back and got a stock ROM and recovery - thanks to Guru Stock Reset ROMs, which is the closest thing I could get to being stock as there are no available RUU's.
But the last and final hurdle is S-ON. My Googling tells me all it takes is this fastboot command: "fastboot oem writesecureflag 3"
But when I throw that in a command prompt, all I get is an error:
(bootloader) partition hboot signature error
(bootloader) writesecureflag: partitions siganture failed
OKAY [ 1.624s]
finished. total time: 1.625s
Could anyone please help? I have to return my diseased pink/purple-tinted, crappy camera issue!
Click to expand...
Click to collapse
wow, brick alert!
you have a modded hboot in there, so you're obviously not as stock as you'd like to think. better you rethink your strategy, and/or check my guide http://forum.xda-developers.com/showthread.php?t=2541082
nkk71 said:
wow, brick alert!
you have a modded hboot in there, so you're obviously not as stock as you'd like to think. better you rethink your strategy, and/or check my guide http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
Damn dude, how far am I from a brick? :S
and you are absolutely correct, I completely forgot about my hboot being modified at 1.55.
It's been awhile since I tampered around with my phone.
Is it then possible to downgrade my hboot to 1.44, with my current set-up? and continue to s-on?
I thank you immensely.
Jikstah said:
Damn dude, how far am I from a brick? :S
and you are absolutely correct, I completely forgot about my hboot being modified at 1.55.
It's been awhile since I tampered around with my phone.
Click to expand...
Click to collapse
Luckily the signature check kept you away from a brick, had you been able to S-On with a modded hboot, then you would have had a brick.
Jikstah said:
Is it then possible to downgrade my hboot to 1.44, with my current set-up? and continue to s-on?
Click to expand...
Click to collapse
I'm not sure what method you used to return to stock, but obviously hboot is not stock, and so could other things as well; I would recommend following my guide, especially if you intend on going S-On.
If you do want to follow my guide, post a "fastboot getvar all" (excluding IMEI and s/n), and I'll let you know which files you need.
nkk71 said:
I'm not sure what method you used to return to stock, but obviously hboot is not stock, and so could other things as well; I would recommend following my guide, especially if you intend on going S-On.
If you do want to follow my guide, post a "fastboot getvar all" (excluding IMEI and s/n), and I'll let you know which files you need.
Click to expand...
Click to collapse
I mean no offence in not wanting to follow your guide, it's great - especially for those less knowledgeable, and in need.
So here's my getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 3782mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s
Surely I'm close?! Thanks again.
Jikstah said:
I mean no offence in not wanting to follow your guide, it's great - especially for those less knowledgeable, and in need.
So here's my getvar:
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0714000
(bootloader) cidnum: VODAP021
Surely I'm close?! Thanks again.
Click to expand...
Click to collapse
no offense taken
but you have PN0714000 + VODAP021 and firmware 3.62.401.1 (.401. = WWE unbranded), so you need to get your firmware correct too; inline with the ROM you are now on.
and personally, I don't recommend going S-Off to S-On on hboot 1.55, sometimes it works fine, but sometimes it triggers "tamper detected" and the tampered is back (can't say when/if it will happen to you)
nkk71 said:
no offense taken
but you have PN0714000 + VODAP021 and firmware 3.62.401.1 (.401. = WWE unbranded), so you need to get your firmware correct too; inline with the ROM you are now on.
and personally, I don't recommend going S-Off to S-On on hboot 1.55, sometimes it works fine, but sometimes it triggers "tamper detected" and the tampered is back (can't say when/if it will happen to you)
Click to expand...
Click to collapse
Ugh, more complications.. back to the drawing board it is!
So looks like all I need is firmware and hboot?
But do you reckon, the repair center will pay any attention to these attributes? I've heard all they check is S-ON, tamper flags and unlocked bootloaders?
Jikstah said:
Ugh, more complications.. back to the drawing board it is!
So looks like all I need is firmware and hboot?
But do you reckon, the repair center will pay any attention to these attributes? I've heard all they check is S-ON, tamper flags and unlocked bootloaders?
Click to expand...
Click to collapse
hboot will be part of the firmware.zip,
and I don't know what they will check, but you may have a problem when it comes back -> if you're S-On, LOCKED bootloader with firmware not matching your MID and CID, then chances are high that HTCDev won't unlock your phone.
nkk71 said:
hboot will be part of the firmware.zip,
and I don't know what they will check, but you may have a problem when it comes back -> if you're S-On, LOCKED bootloader with firmware not matching your MID and CID, then chances are high that HTCDev won't unlock your phone.
Click to expand...
Click to collapse
Okay, well that simplifies things..
Now I just have to find a firmware.zip
You're pretty well-versed, I must thank you again for your foresight.
Jikstah said:
Okay, well that simplifies things..
Now I just have to find a firmware.zip
You're pretty well-versed, I must thank you again for your foresight.
Click to expand...
Click to collapse
I'm assuming you used Guru ROM 2.24.980.2 ? i made a quick search but came up empty on the firmware for that. you could pull it from the OTA file if you find it; within the OTA.ZIP is another firmware.zip <- that's signed original firmware
nkk71 said:
I'm assuming you used Guru ROM 2.24.980.2 ? i made a quick search but came up empty on the firmware for that. you could pull it from the OTA file if you find it; within the OTA.ZIP is another firmware.zip <- that's signed original firmware
Click to expand...
Click to collapse
Rejoice! For I have found the exact firmware for the ROM - http://forum.xda-developers.com/showpost.php?p=44452049&postcount=438
Google is truly a wonderful thing, and you Mr. nkk71.
Jikstah said:
Rejoice! For I have found the exact firmware for the ROM - http://forum.xda-developers.com/showpost.php?p=44452049&postcount=438
Google is truly a wonderful thing, and you Mr. nkk71.
Click to expand...
Click to collapse
Nice find :good: :good:
don't forget to flash it twice:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
and since firmware & ROM are 2.xx (hboot 1.54), going from S-Off to S-On should be safe
nkk71 said:
Nice find :good: :good:
don't forget to flash it twice:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
and since firmware & ROM are 2.xx (hboot 1.54), going from S-Off to S-On should be safe
Click to expand...
Click to collapse
Oh jeez, here we go. I put the firmware.zip into my sd card, pulled up a cmd, entered rebootRUU mode, and tried to flash firmware zip.
And...
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1526722560 bytes
sending 'zip' (28294 KB)...
OKAY [ 2.210s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 2.701s
What's wrong with my CID? I even changed it from VODAP021 to HTC__039 to see if it would run, still the same error.. :|
EDIT: Okay so I SuperCID'ed, it worked however my bootloader is still 1.55? wut.
Don't tell me I need an unlocked bootloader, I need an unlocked bootloader right? -_-
I believe you said HTCdev won't unlock it if I had a non-matching firmware to my CID/MID? ugh.
EDIT: NOPE, no luck either with an unlocked bootloader - same result.
Jikstah said:
Oh jeez, here we go. I put the firmware.zip into my sd card, pulled up a cmd, entered rebootRUU mode, and tried to flash firmware zip.
And...
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1526722560 bytes
sending 'zip' (28294 KB)...
OKAY [ 2.210s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 2.701s
What's wrong with my CID? I even changed it from VODAP021 to HTC__039 to see if it would run, still the same error.. :|
EDIT: Okay so I SuperCID'ed, it worked however my bootloader is still 1.55? wut.
Don't tell me I need an unlocked bootloader, I need an unlocked bootloader right? -_-
I believe you said HTCdev won't unlock it if I had a non-matching firmware to my CID/MID? ugh.
EDIT: NOPE, no luck either with an unlocked bootloader - same result.
Click to expand...
Click to collapse
You do realize those errors/safe-guards are actually saving you!!
There's nothing wrong with your CID, so set it back to what it's supposed to be.
And the reason it's not working (actually it is), you are flashing the wrong firmware.zip, the one you are flashing is 28294 KB (probably a modded one), whereas the one you should be flashing (from the link you posted earlier) is 41197KB.
now put the correct firmware.zip in your adb/fastboot folder and flash it, fastboot doesn't use anything from your sdcard, it uses the files on your PC.
nkk71 said:
You do realize those errors/safe-guards are actually saving you!!
There's nothing wrong with your CID, so set it back to what it's supposed to be.
And the reason it's not working (actually it is), you are flashing the wrong firmware.zip, the one you are flashing is 28294 KB (probably a modded one), whereas the one you should be flashing (from the link you posted earlier) is 41197KB.
now put the correct firmware.zip in your adb/fastboot folder and flash it, fastboot doesn't use anything from your sdcard, it uses the files on your PC.
Click to expand...
Click to collapse
Gosh, you are too good. This is definitely the big break.
But nope, freakin' adb decides to bail on me and my device can no longer be detected. WTF?! What have I done to deserve such trouble.. -_-

Categories

Resources