All,
I am running the T-Mobile UK ROM and would like to use the little 3G icon, see attached, in another ROM. Does anyone know what files I need to copy?
Thanks
Msuk
I'm using a stock HTC ROM.
When browsing the Windows Folder, I bumped into these files:
3G.bmp
3G_connect_PPC.bmp
3G_sync_PPC.bmp
These are probably the files you need to replace. (I haven't done it myself but can't think of anything else)
Hi,
These are not the files unfornately, I have a feeling the one I am looking for are embedded within a DLL.
Thanks
Msuk
ok so i flashed the energy rom to my sprint diamond. i looked around ppcgeeks and xda for a way to update my profile and prl from the start-settings-system menu but i am not able to find a way. i read that installing the sprint carrier cab to my system memory will allow me to update my prl and profile but the update icons do not appear on the system menu. anybody have any idea how to do this? any help will be appreciated.
Hello. I read the radio thread but i not able to find an answer to my question:
I installed any days ago new 1.17 radio.
I installed it flashing radio (blacimg.nhb) from memory card.
Now, i notice that exists many rillphone.cab file, one for each radio version. Now,
what are these files? Should I install them? What for?
http://forum.xda-developers.com/showthread.php?t=466274
Hello Everybody!
I recently ended up with a RHOD400 from Sprint. I use a T-Mobile affiliate. I know these phones have a SIM card slot. The phone is Security Unlocked and I flashed a HardSPL to it. Can this be used on my T-Mobile Afilliate? I realize its a GSM network but I see the SIM slot. Here comes the fun part. I tried flashing 21905_WCX_RHODIUM_TILT2_UPDATED_APPS_TABS and now I'm stuck on the splash screen. Have I bricked this phone or is there still hope for a noob move like this? After doing some reading I found Task29 and used it to clear the storage to try to get a different rom to work. So basically, what I need to know is
A:Is this phone bricked?
B: Can I make this phone work on a GSM carrier?(It is SIM unlocked and CID unlocked I think, but not sure if it still is after Task29 cleared the memory).
C: What ROM would I need to do this?
D: I am familiar with flashing as I have flashed several ROMs with my ATT Tilt. I was pretty sure I did everything correctly, so I'm not sure what happened.
Any help would be lifesaving because I dont want to further screw myself.
mcjewpants said:
Hello Everybody!
I recently ended up with a RHOD400 from Sprint. I use a T-Mobile affiliate. I know these phones have a SIM card slot. The phone is Security Unlocked and I flashed a HardSPL to it. Can this be used on my T-Mobile Afilliate? I realize its a GSM network but I see the SIM slot. Here comes the fun part. I tried flashing 21905_WCX_RHODIUM_TILT2_UPDATED_APPS_TABS and now I'm stuck on the splash screen. Have I bricked this phone or is there still hope for a noob move like this? After doing some reading I found Task29 and used it to clear the storage to try to get a different rom to work. So basically, what I need to know is
A:Is this phone bricked?
B: Can I make this phone work on a GSM carrier?(It is SIM unlocked and CID unlocked I think, but not sure if it still is after Task29 cleared the memory).
C: What ROM would I need to do this?
D: I am familiar with flashing as I have flashed several ROMs with my ATT Tilt. I was pretty sure I did everything correctly, so I'm not sure what happened.
Any help would be lifesaving because I dont want to further screw myself.
Click to expand...
Click to collapse
It seems that you may have bricked your device. You may be able to prepare a goldcard using QMAT and unbrick it this way.
If you manage to unbrick your device then there is a way to get it working with AT&T or T-Mobile. However, you will get EDGE (2.5G) at best. You can use the method described here or look for the OliPro SIM unlock. Keep in mind that both of these methods cost money. You can then flash it with a proper CDMA ROM like this one.
Note: if it was already HardSPL'd like you said, then you will only have to flash the ROM. If you are not getting service on a GSM carrier, though, you will have to SIM unlock again. Task 29 should not lock the SIM or change the radio, so that should not have had any effect. Also, once you've used Task 29, you will need to flash a new ROM using the RUU. To do this, put your phone into bootloader mode (hold down the volume down key right when the phone starts up)
I wish you the best of luck!
I actually had the OliPro SIM unlock done already, paid the money and am downloading the ENERGY ROM as we speak. Should know in a few if it will work. :CROSSFINGERS:
Ok, now I got the rom flashed over(Yay!), but I still dont know how to get it to work with my sim card. It still reads as Security Unlocked on the bootloader, and ever recognizes my Sim card contacts, but when I make a call it gives me a message saying my account could not be validated. Do I need to do something to get it onto GSM? Or do I just need a new radio? If it is a new radio, will I need GSM or CDMA from now on? And speaking of which, will I need CDMA or GSM roms for this pphone? Sorry about all the questions, I have always used ATT& T-Mobile phones in the past, so this was never an issue.
Ok, very strange. It says I have a voicemail, knows all my SIM contacts, reads my weather automatic, but I still cant make a call. I did another HardSPL, and did the SIM unlock again, went in and changed the phone band to GSM, just to be sure, but it still has a voice message when I try to make a call that says "Your account cannot be validated, please contact customer service". I'm pretty lost at this point so any help would be great. I am glad to know this phone isn't bricked though
You're in the wrong forum. This particular forum is for the GSM Rhodium, you have a CDMA forum (albeit one that can work on GSM networks too). So you need the CDMA version of HardSPL and a CDMA ROM to make it work (if it hung on the splash screen then you flashed the wrong type of ROM).
Folks in the CDMA sub-forum may be able to advise you about getting it to roam on a GSM network. Also try ppcgeeks.com , which tends to have more CDMA users.
steviewevie said:
You're in the wrong forum. This particular forum is for the GSM Rhodium, you have a CDMA forum (albeit one that can work on GSM networks too). So you need the CDMA version of HardSPL and a CDMA ROM to make it work (if it hung on the splash screen then you flashed the wrong type of ROM).
Folks in the CDMA sub-forum may be able to advise you about getting it to roam on a GSM network. Also try ppcgeeks.com , which tends to have more CDMA users.
Click to expand...
Click to collapse
I'm actually not stuck on the splash screen anymore. I flash The ENERGY rom over and it worked in the sense that I'm no longer stuck in splash screen. Now I can Get sim contacts, weather. I just cant make calls or send text, Internet ect. I just get a voice message that says "your account cannot be validated"
I'm still not sure
ok, but you're still in the wrong forum though. You're asking questions about a phone with CDMA ROM, and this sub-forum is for GSM ROMs. I suggest going to NRG's thread on ppcgeeks.com, there's a link to that in his thread here.
UPDATE: Finally got it, just needed to search for networks again. I thank everyone for the help.
And will remember the CDMA sub-forum in the future
Hello, I have HTC G1, it has old radio. I flashes a new rom, as I recall Nameless froyo. The thing I only get 2G and wi-fi is giving me an error. This thing is the same on other ROMs. But wi-fi worked on android 1.0 (RC7). So I was wondering, should new radio would solve this problem? My G1 is originally from T-mobile (UK). So what radio should i flash?
Thanks in advance.
you can try flash this Radio and HBOOT
http://forum.xda-developers.com/showthread.php?p=10692873#post10692873
Is this thing, that i find out could be the cuase for 3G? My phone LG Optimus supports 900/2100 HSDPA, and G1 only supports 2100 HSDPA. So I won;t get 3G in my area at all? I had earlier Samsung J750 witch supports 2100 HSDPA too, So 3G worked in another city. So I suppose, ehat I realised is correct. Now one thins, that bothers me, is why i can't turn on wi-fi? I get an error, though wi-fi worked on android 1.0 (RC7). I tried flashing both radios: 2.22.23.02 and 2.22.19.26i. So, I suppose, it's wrong kernel. Kernerl is 2.6.36.4-53-ezgb-v1.5.1f [email protected] #1
A new radio adn SPL solved this Shame about 3ŋ, but nothing i can do abou it. Thank you for support.
I have same issues, could you say what radio an spl you flashed to fix the error in wifi?
Thanks