this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.
someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.
Nope doesn't work.
I tried it already.
Sorry guys.
Worked for me. Took some time before PCC registered it though.
help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Video instruksion would be very helpfull maybe
Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"
All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.
Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.
I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?
For me worked with magnetic and usb 1A charger! Thanks!
Related
So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.
dew1989 said:
So I upgraded to the latest mr clean rom and did some tweaks with the registry Wizard. I was playing around with it for a while and turned it off to charge overnight. I wake up and try and turn it on and nothing. I've tried soft reset, and hard reset and it doesn't turn on or do anything. When I plug in my charger the light on my phone doesn't even come on. PLEASE HELP. WHAT CAN I DO!!!.
Click to expand...
Click to collapse
It seems that you bricked you phone mate. I think that you installed MrClean rom in a G4 phone so you irrimediably f*cked up the bootloader (IPL and SPL). Many users have reported that their phones were able to boot (and behaved normally) immediatly after the flashing but were dead after they turned them off for the first time, this is what happened to you.
Only thing you can try is going to bootloader mode (but i think it won't work since you messed the bootloader) and then flash a new rom. To do this, press and keep pressed both the keys on the right side and then insert a pin in the reset hole briefly. If the phone goes to the tri-colors screen then you're safe, if not continue reading.
If your warranty perior is not yet over then you can have a new phone for free (DON'T tell them that you flashed an experimental rom!!! Tell only that it went off suddenly or that you were installing an official rom!).
Service centre can repair your device (i suppose they've some method to reflash the bootloader) but i don't know how much they'll ask you.
Try asking other users on this forum. Sorry!
bye
...did you ry to recharge it with the ----ORIGINAL 1A CHARGER----? looks stupid, but i resuscitated mine just before throwing it in the bin. if it works, i will explain you the rest....
yup, I tried charging it with the home charger and still nothing. My battery reads at 3v and it's supposed to be 3.8 so it's not out of juice, but maybe it's just dead?
...you can try with just a normal 9 VDC battery, in order to boost up the voltage, to connect it for a few seconds to the ppc battery till you reach the 3.8 VDC and see if it's working...
Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA
dew1989 said:
Ok, i did that...and amazingly it turned on so I pluged it into the charger right away. Windows booted and about 20sec later the device turned off and won't charge again. So i tried again and the same thing happened. Do I need a new battery? TIA
Click to expand...
Click to collapse
This is waht you need:
http://www.thetravelinsider.info/phones/cellphonerecharger.htm
This charger is somehow wired weird... it charges the battery AND feeds juice to the phone at the same time (believe it or not, regular chargers and USB cables do not engage until the OS is loaded), allowing you to turn the phone on and in a few minutes plug it into the regular charger to continue charging. Just make sure you get the RAZR tip.
It has saved my ass more than once.
I fixed it , What I did was zap the battery with a 9v battery in 3 sec intervals, I did this about 5 times, then I pluged my phone into the charger and turned it on, the 9v gave it enough juice to boot up and the usb took over from there. So to everyone out there who is having this same problem, try this but don't over zap, check your battery with a multimeter.
im having the same problem----my MDA went dead last night because i forgot to charge the battery and then i went to plug it in the charger but the phone doesnt turn on no more...the light doesnt turn on like if it would be charging and i left it overnight and it still doesnt work..... do yall think that its the battery or is the phone just messed up and cant use it nomore????
Last time I had my battery completely drained, it wouldn't charge from laptop via USB. I read something about how the device's "smart-charging" function itself needs a bit of power to start-up...
but anyways, I couldn't charge the battery through the phone (software charging) - what I had to do was to take a USB cable, cut out one end, identify the +/- (red/black) wires, and charge them directly to the battery's two poles (metal plates). It took about 10-20 seconds of charging until I had enough power in the battery to place it back in the phone, start WM5 and charge it thru the phone.
It would have been much easier if you have a battery charger.
I had my phone connected to the computer through the usb cable, and I just left it connected for a week and it was completely dead and could not be turned on. I don't know how it drained the battery (probally by leaving the wifi on, but the computer was in use all the time). Anyway, thanks to this thread, I used the ac charger and it turned on.
Keywords: t-mobile tmobile mda phone won't don't turn on
phone down
thanks for infos
I'm going to give this a go; a Crossbow ROM flash went horribly wrong last night and in my attempts to repair it (I also must have flashed at least 9 times) the phone went dead. It won't charge either, but battery voltage is 3.7 volts, and I'm sat here wishing it was 3
Will get back to you all!
To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.
Suggestion
CrArc said:
To update: no... it didn't work! I hooked the battery up to a computer power supply (nearest thing to hand) on 5v and 12v and the voltage increased to about 3.81V... I guess the battery is not the problem with my phone, though the symptoms were the same :-(
Any buttons I can press (i.e. like the voice command button for bootloader) to wake the damned thing up? It's probably fried.
Click to expand...
Click to collapse
My phone has a hardware problem with the on / off button (doesn´t work at all), at the beggining I thought it was a software problem and I tried all sort of tricks, then I gave up and recognized that was a hardware issue and I found 2 ways to turn the phone on 1) When is totally off (This happens when I have to remove the battery to change SIM card) I connect to the USB cable to my PC or to the car or wall charger and I make a soft reset. 2) When I see the phone signal led blinking I remove the memory card and wakes the phone up (not a good idea since I know that the card is going to get damaged sooner or later).
I just got a G3 wizard from a friend a couple days ago. On Thursday I upgraded it to XDA Mobile 6 and left it on the 2.25.11 (I think) T-Mobile Radio that the T-Mobile 2.26 firmware flash put on it. I used it all day on Friday and then I held the power button and shut the phone completely off for 25 hours, but left it plugged in to a usb to 110V AC adapter that came with my Dell Axim X50V. On Saturday night I went to turn it on and it would not come on no matter what I tried. I found this thread and checked the voltage on the battery directly with a multimeter, 3.13V. I cut the head off a usb cable and then held the black and red wires to the positive and negative terminals on the battery for 2 minutes with the head plugged into a front USB port on my PC. The multimeter then read 3.7V. I put it back into the MDA and it turned on, booted and informed me that the battery was completely drained. I plugged it into the USB to AC charger and it read 10% battery on BatteryStatus. I have left it to charge and it is currently at 60%.
I guess the lesson here is to not totally shut the phone off and let it sit, or the battery won't charge, even plugged into my charger. I guess the OS needs to be running in suspend mode for the charging circuit to run. I know I won't turn it all the way off ever again unless I have my little plug thing and my laptop with me.
(old) Nokia phones have a state called "Acting dead" (from service manuals) which takes place when phone is turned off and battery inserted. It means that the energy is flowing around the board so that the responsible hardware keeps waiting for a 'HIGH' signal ordering to turn ON the phone.
When batteries go bellow the 2.x volts they stop being charged by the phones. This is why i protect the battery terminals with tape when the phone is stored for some time and the reason why a lot of people thinks the phones are broken when not used for months. I usually use the 'freezer trick' where i leave the batteries inside the freezer all night and charge them next day.
just 2 cents...
My Wizard XDA got discharged over the weekend and wouldn't start up - after 12 hours on USB it still wouldn't start.
The charge tips saved my bacon - I modified a USB cable as per the instructions above, and used it to charge up the XDA battery - it only needed five seconds and the phone now boots!
Thanks All, great information!
My 2 cents...
If you're going to try the same, connect red usb to the +ve terminal of your battery and black USB to the -ve terminal of the battery. I'd suggest having a voltmeter to hand to check battery and supply voltage.
Disclaimer - the ablve worked for me, but I'm not responsible for anyone damaging themselves, their PC,their phone or anything else by using the above info!
BUMP! thought my phone was dead, hacked a USB cable and i'm back in business!!!!
TYTN II won't turn on
i left it plugged in all day and when i tried to turn it on it didn't respond. i have a second battery that was fully charged and that didn't work either. i tried a hard reset with it unplugged and with it plugged into the charger. nothing works. i'm on the standard at&t rom with lots of programs. i got it unlocked so i can't go to at&t.
My battery died last night and i charged the phone up and now the phone will not turn on anymore. Anyone have any ideas cause i'm completely out of them???
have you tried takin git out an putting in the phone again?
Yup. I dunno what is going on. I was using sony's cable to charge the thing and the power button was lit up red and now i switched to a different cable and the power button doesn't turn red anymore but the indicator lights are flashing like it doesn't have enough power to start. It may just be dead and sony's cable just stopped working and never charged the thing
Nope that isn't it... it just won't power on for some reason. i hope someone has an idea as to what is going on because i don't
I had a similar problem and had to leave it plugged in for at least 10 mins before the LEDs indicated it was charging.
THANK THE LORD THANK THE LORD. I was right. The crap cable sony uses just didn't charge the phone at all. Now that i switched i was able to turn the phone on again.
Try hard reseting the device while it is powered, might do something if its a software issue.
battery stone dead~won't recharge
I have the same problem. I don't believe ti has anything to do with the cable. The first time it suddenly came to life after a day or two fo being dead, but this time so far it is still in a coma. It did briefly awaken when connected to the pc, but it kept blacking out, and now it's completely gone again.
Could it be that it is not set to power off until the battery is completely stone dead, and therefore it won't recharge?
I think you are absolutely right. I don't believe it allows you to charge it until it is turned on. So try and plug it for like 15mins and try and power it on. Let us know if it works
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
Came accross this also in the Kaiser forums - think it has something to do with the battery being absolutely drained, so much that there isn't enough power to switch the current to the battery again.
Never happened to me, so never quite figured it out. But the Kaiser forum had a lot of discussion (and solutions I think) on this. (Xperia has HTC involvement..or so it's rumoured).
Tanquen said:
This sounds like what I have seen on more than one device. If you let the battery go completely dead it will not take a charge from a USB cable to a PC or hub, even if it was a powered hub. We had some old HTCs that would only take a charge from a transformer when the battery had been fully depleted. It was like the USB to PC or hub did not give it enough amps or watts to turn it on and start charging.
Click to expand...
Click to collapse
yep... I have had that happened to my blackjack 2 a couple times too. everytime I had to connect it to the charger for like 10 15mins before it can turn on again... plugging it to the pc/hub never work.... also happened once to my iphone as well
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
There is defiantly something extra going on with the Xperia. While other devices I’ve seen fully drained refuse to start charging again from a USB to PC cable and even some power outlet charges. My Xperia is also doing as Nipperos. With an almost full charge I plugged it into the USB to PC cable and the icon went to the little plug and when I clicked on it the status said that it is was charging but when I got ready to leave for the day it had drained down one red bar. It was also very warm. With this, the $800 price tag and the random crashing made worse by the incredibly poor location of the reset button and made even worse by the incredibly poor design of the battery cover. Really, what is the proper way to get the thing off without breaking it? I’m fighting the urge to return it.
Any word on a new firmware?
Nippero said:
Hey I just ran into this problem today.
Turns out it was activesync messing with the phone
Ended the mobile device center process in task manager and phone went back to normal.
EDIT: Ok maybe its not back to normal. But it was definitely caused by activesync...
EDIT2: Back to normal now... Had to plug in the wall charger. After a minute the charging lights flashed and i was able to turn it on.
Checking battery status, and its in the red.. I guess the activesync was just a coincidence.
But wow, I left the thing plugged into my computer overnight to charge, and apparently it drained more than it charged?
Click to expand...
Click to collapse
I've noticed this too... My phone will be on full charge, i connect it to my PC to install a software, then i check one bar's gone... it drains more than it charges...
my x1 did this today. my buddy has a verizon htc phone and let me use hus htc wall charger and it did the trick...
my x1 is a x1i so i dont know if the US. plugs or what dont agree with the phone. but out of 6 cables and chargers only 2 will charge the phone from a dead battery the other 4 would only charge after it was on.
so my best solution for you all is to find yourself a htc wall charger and let it charger for 20 mins before trying to turn it on.
and of course theres htc involvment on the x1. look in the windows folder. all drivers are HTCxxx.dll the comm manager is htc. theres a forum here the htc developers site. this isnt a site for samsungs and other makers. this is a site for htc devices. if it wasnt a htc device it wouldnt be here.
My experience
I had a similar experience while on a trip to Korea. I didn't foresee that a 200mA difference in the current output of a wall socket charger will cause me so much pain.
I had always been able to charge the X1 with my Jabra headset's wall socket charger, hence I brought it on my trip. Not being mindful of the ratings, it can only supply 500mA, which is different from the X1's charger, 700mA. I was using it happily on a bus, happily keeping it alive with a solar USB charger (till it ran out of juice too). A while later, playing with the GPS I noticed my battery power dropped to 20% (2 bar) so I pressed the power button to conserve energy.
Unknowingly, the battery kept draining and the next time I wanted to turn it on I couldn't. The top 2 LEDs gave me 3 red blinks. I thought, "ok, so I just go back to the hotel to charge it with my Jabra charger."
When I tried that, I noticed that the power button gave a constant red LED and the battery did not charge. Taking out the battery and putting it back, I noticed the power LED went off (which indicates it was going to charge) but came back out again. It never charged.
Back home, after using the supplied SE charger, the power LED went off and never came back. I tried to turn on the X1 after 15mins and it powered up, showing the usual charging LED cycles.
Lesson Learnt. Always use original accessories.
Same problem here....
I knew about problem charging totally dead battery with wall plug-in (from previous HTC). Totally dead battery was not possible to charge via USB (from PC). But I have bought xperia via ebay and didn't know the wall charger is not original SE charger... Hope to work with previous HTC charger
Tx for coming to the idea
Just happened to me :S
I had used it all day and Wifi was turned on so obviously battery was almost dead. To save battery I turned off the Xperia.
When I tried to turn it on again it wouldnt and so I connected it to the pc.
That didnt work out so I connected it to the standard charger but that also didnt work. Right now my Xperia X1 is lying unplugged on the table because someone said you should leave it unplugged for a couple of minutes.
Hopefully it will work, I only have had it for 3 days :´(
Also hope this doesnt happen everytime your battery is drained because that would be annoying as hell.
--Edit--
Ok so what I did was I removed the battery and plugged it back in. This worked and I managed to turn it on and right now its charging.
Though when I try to go to sleep mode it turns the display on again after about 3 seconds and does what I am guessing is a low battery beep (Sorry windowsmobile noob here) but then stops instantly, which is pretty stange.
ok anyone know a way to increase the power wattage from your pc to the usb device? (sounds dangerous i know), but there must be someone who has had a similar prob and was able to fix with a bit of tweaking....ill google and come back with any results
okay...i had similar problem today morning..it wudnt start.
so i left it charging for ten minutes...and now it has turned on finally.
i think the battery goes completely dead.
My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks
Did it just randomly die? Is there anything you did beforehand that could influence it, like dropping it (in water)?
I'm not entirely sure what it could be, but if you could provide this info, others mide have an easier time troubleshooting.
dr9722 said:
My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks
Click to expand...
Click to collapse
HI
greetings,
connect the phone to charger and press and hold the power button for 30 sec and see if the led is flashing
if not then connect to pc and try to boot into bootloader menu and tell what happens. weather it boots, does it just vibrates or does the led flash
The phone (C5303 - Stock ROM - Locked BL - No Root) was working normally. The last time I checked, it had 60% battery.
The phone suddenly stopped working.
I tried to turn on the phone. Nothing Happened.
I tried to hard reset. Nothing Happened.
I even tried to charge the phone... Even the red illumination light was not working!! Hence, nothing happened at all.
I couldn't find a solution to this...Please help!! :crying: :crying:
karan11000 said:
The phone (C5303 - Stock ROM - Locked BL - No Root) was working normally. The last time I checked, it had 60% battery.
The phone suddenly stopped working.
I tried to turn on the phone. Nothing Happened.
I tried to hard reset. Nothing Happened.
I even tried to charge the phone... Even the red illumination light was not working!! Hence, nothing happened at all.
I couldn't find a solution to this...Please help!! :crying: :crying:
Click to expand...
Click to collapse
I would suggest for you to first, hold the off button under the battery cover for about 20 seconds. This might stimulate "battery removal" on the SP. Afterwards, try plugging in the wall charger and see if the device react.
TechnoSparks said:
I would suggest for you to first, hold the off button under the battery cover for about 20 seconds. This might stimulate "battery removal" on the SP. Afterwards, try plugging in the wall charger and see if the device react.
Click to expand...
Click to collapse
I tried doing that.
Still nothing happened!!
:crying:
Let it charge using a wall socket for atleast 12 hours!
Gamm86 said:
Let it charge using a wall socket for atleast 12 hours!
Click to expand...
Click to collapse
Did that. Still no change.
No red LED light, no vibration, even the screen is not on.
If pressing the yellow button on the back for 10 seconds doesn't work after charging it for 12 hours, you either have a faulty charger or a dead phone. (hardware failure)
Last chance would be to use a different charger. If that doesn't work, you will have to return your phone and file a warranty claim if you have NOT unlocked your bootloader nor rooted it.
Should you have rooted or unlocked your phone then I can only suggest visiting this link: http://tinyurl.com/n35lsjn
Gamm86 said:
If pressing the yellow button on the back for 10 seconds doesn't work after charging it for 12 hours, you either have a faulty charger or a dead phone. (hardware failure)
Last chance would be to use a different charger. If that doesn't work, you will have to return your phone and file a warranty claim if you have NOT unlocked your bootloader nor rooted it.
Should you have rooted or unlocked your phone then I can only suggest visiting this link: http://tinyurl.com/n35lsjn
Click to expand...
Click to collapse
Well, it's definitely not rooted or unlocked. And it's warranty has been expired (more than 1 year old).
I guess I'll go the Sony service center or else, the championship!!
Thanks for the support anyways!! :good:
Hi,
Couple of days ago same happened to me.
I just took phone to hand and realized that its completely dead. Just like this, without a reason. No vibrations, led blinks, no reaction for any button combinations, plug-in charger and so on.
After a long time of fighting, reading forums, youtube clips etc. something started to change and prevented me to buy another phone.
First symptom was that in time where power button is pressed the red light had blinked two times shortly and then again and again. When button had been released again nothing.
Then I've been trying to connect phone to PC in flashmode. It has failed but I've observed that right after usb connector is plugged, windows knows that something has been connected ( "USB device connected" sound) but 2 -3 seconds later
disconnected ("USB device disconnected sound"). In this moment PC companion even was able to complete step "connect the device" but right after that it returned error (disconnect device, connect again and try again).
Then I connected phone to wall charger again. Now, when I do this, in first moment i see short blink of red light and immediately after this it starts to shine constantly for a couple of minutes. After that red light goes out for another couple of minutes and whole sequence repeats again and again in loop (short red light -> long red light-> no light).
I've red somewhere that constant red light means that phone battery has not enough power even to run charging mode via kernel (not enough power to run kernel). The suggestion is to be patient and charge the phone via wall charger for 15 or 20 hours, what currently happens. I'm still waiting for miracle. I could buy new battery but I wouldn't like to do this for nothing.
If you have any suggestions or advices/confirmation what the red light sequence means please feel free to comment @karan please share with us the result of service intervention and root cause of issue if possible. Thx in advance.
ps. additionally I've discovered that usb cable which I used is broken. different phone connected via this cable to pc is not recognized (nothing happens) but under another cable it does normally. It might be the reason of problems but I have no Idea if it could result the battery dead.
Hi,
Anyone knows if phone should work without battery? I've seen such information on polish android forum however when I unplugged the battery and plugged charger nothing happened. Only one short red blink and then nothing. If phone should work in such state it means that my problem is not related to battery.
Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Qba_S said:
Hi,
After many years of enjoying this magnificent phone the disaster came.
The phone discharged overnight and switched off. In the morning I had to send some texts, so plugged the wall charger into USB socked (a weak one ~500mA), after few moments a charging icon appeared and stated that battery has 1%. Ok, I really had to send those messages: I've pressed the power button and phone started to boot.
Sony logo: OK, purple wave, OK...
After 10-20 seconds it suddenly switched of, red LED started to blink.
I thought: OK, system startup needs a lot of power, maybe a charger is too week to keep up.
So I left phone for few more minutes to charge, but without success.
That was the last time I saw screen was on.
Phone is a C6903, running on a stock, rooted 14.6.A.1.236 with the recent XZRecovery.
Bootloader has been unlocked.
For the moment I've tried everything but opening back and doing the testport-trick.
When I connect the power only red led blinks (I left the phone charging overnight, no change).
When I try to enter flash mode: nothing happens but red blinking light.
When I try to start phone nothing happens at all.
But there is still hope:
I connected the phone to 2A charger using a magnetic cable.
Then I've connected normal USB cable to my PC, strange thing started to happen:
When I pressed volume Up (even after few minutes of connecting power+usb) the phone suddenly jumped to fastboot mode (blue led, it was discovered by PC, fastboot terminal was functional)
When I press power button, phone vibrates for a second, then the led pattern changes to: 1s red followed by 0.1s green, then long red, then it repeats...
I'm still unable to enter any recovery nor flashmode...
I'd really appreciate any help, have you got any ideas left how can I revive my phone?
Click to expand...
Click to collapse
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
tilakpatel22 said:
Hi, this just happened to me, my phone has been dead for over 4 weeks with just the red led blinking. i tried the test point thing with no success at that point I gave up but last week i decided to get a new genuine battery and it worked it booted up. Your battery is just completely dead thats why it won't boot up!
Click to expand...
Click to collapse
Thanks for the info! I've ordered a replacement battery already.
I'll open my phone today and measure all voltages. I'll keep you updated.
Good luck
tilakpatel22 said:
Good luck
Click to expand...
Click to collapse
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Qba_S said:
Yup! That was it (at least I think so, I don't have new battery yet)
The Al part of positive battery terminal was broken: I have no idea why, maybe because of age, oxidation and high currents that were drained from this LiPo cell...
Anyway I've managed to temporarily join two broken Al parts, kernel and recovery booted successfully.
Now I need to wait for a replacement battery.
Phone is alive again, thanks tilakpatel for help!
But the magnetic cable trick might be useful in other hardbrick cases: just connect magnetic charger, connect normal USB cable to PC and hold volUp. Phone should be able to enter fastboot even with completely drained battery...
Click to expand...
Click to collapse
no problem