Is there a registry hack to make the time/date always displayed up in the title bar? I know there was one for the hermes but I haven't found it for the kaiser yet.
OK nevermind, I feel slightly retarded. I just remembered it's not a registry tweak that does this. To display the clock on the title bar in all programs, go to Start > Settings > System (tab) > Clock & Alarms > More (tab) > check the box that says "Display the clock on the title bar in all programs."
Thanks for answering your own question, I'd been wondering about this too.
Ok so I was playing around with Any Cut today to see what everything is and I decided to make a little list of everything and what it does:
ACTIVITY:
Alarm Clock
Enable Forecast Alarm Clock
Alarm Clock
Actual Alarm Clock Program
APNs
Brings up APNs Settings from settings
Application Settings
Brings up Application settings from settings
Attention
Mobile Network settings form settings
Battery Info
Brings up battery info (battery status, level, voltage, temp etc etc)
Bluetooth Settings
Brings up Bluetooth settings from the settings
Browser
Brings up the web browser
Calculator
Brings up the calculator
Calendar
Brings up the calendar
Calendar Content Provider
Brings up CalendarContentProviderTest (Run All, Recurrence Processor Test, ICalendar Test etc etc)
Calendar Tests
Brings up CalendarTests (Run All, Format Data Range Test, Week Number Test)
Call Settings
Brings up Call Settings form settings
Camera
Brings up the camera
Camera Settings
Brings up Camer settings from settings (store location in picture, prompt after capture)
Camera Settings
General Settings (Picture size, picture sort, slideshow intervals, etc etc)
Change SIM PIN
Change SIM PIN from settings
Contacts
Brings up contacts program
Data Roaming
UNKNOWN STOPPED UNEXPECTEDLY
Data Synchronization
Brings up data synchronization in settings (auto sync, gmail sync, calendar, and contacts)
Data & Time Settings
Brings up Date and Time settings (automatic, set date, set time zone, use 24 hour etc etc)
Data & Time Settings
Same as above
Debug Intent Sender
Brings up Debug intent sender (action, data, sccount, resource etc)
Delete Limit Exceeded
Nothing
Development
Brings up development menu from settings
Device Info
Brings up device info (uptime, awake time, asleep time, build description
etc)
Dialer
Brings up the phone dialer
Display
Brings up display menu (font size)
Email
Brings up email (not gmail email)
Enable/Disable SIM PIN
Enable SIM PIN menu
Factory Data Reset
Brings up Factory Data Reset (This action will reset the phone to its initial factory state...etc)
Field Test
Brings up Field Test application (Please select an item to test)
Fixed Dialing Number
Brings up Fixed dialing number menu (FDN disabled, Change PIN2, Manage FDN list)
Gmail
Brings up Gmail application
Google Search
NOTHING BLINKS SCREEN
Google Talk
NOTHING BLINKS SCREEN
GTalk Service Monitor
Brings up GTalk Service Monitor (brings a lot of personal information up, email address, has all connections listed...worth looking at)
Home
NOTHING
IM
Brings up the IM menue (AIM, Google talk, Windows Live, Yahoo messenger)
IM
Same as above
IP Settings
brings up IP settings (use static IP, IP address, gateway, netmask etc)
Locale
Brings up Locale menu (English (US))??
Locale
Brings up Text Settings (auto replace, auto cap, auto punctuate)
Locale
Brings up Locale menu (select your language)
Manage Applications
Brings up manage application from settings
Map
Brings up Google Maps applcation
Market
Brings up the Android applications
Messaging
Brings up messaging application
Music
Brings up the music application
Network Setting
Bring up Mobile Network settings (data roaming, use 2G, sperator selections etc)
Operator Selection
Brings up operator selection (available networks, search networks, select automatically)
Phone
BLINKS AND THATS IS
Phone Info
Brings up the Phone info menu (IMEI, IMSI, Ping IP address, roaming, GSM service etc)
Phone Status
Brings up About Phone menu (Status, legal info, contributors etc)
Pictures
brings up picture folder (all pictures, IMG, and camera pictures)
Pictures
Lists all pictures
Proxy Settings
Brings up proxy settings menu (hostname, port)
Quick Launch
Brings up the Quick Launch application (set QL shortcuts)
Quick Launch
Brings up quick launch menu to place on home screen
Raw Image Viewer
Brings up recent picture from camera
SD Card
Brings up SD card menu (enable USB mass storage, unmount SD card)
SD & Phone Storage
brings up SD card menu (total space, available space, Use for USB storage, Internal phone storage etc)
Settings
Brings up setting menu (wireless controls, call settings, sound and display etc)
Settings
SET GSM UMTS BAND SETTINGS (USA bans, JAP bans, AUS band, EURO band etc)
Setup WIzard
Initial setup when you get the phone
SIM Card Lock Settings
brings up sim card lock settings from settings
Sound & Display
Brings up sound and display menu
Sound Recorder
Brings up sound recorder application
Status
Brings up status menu (battery status, battery level, phone number, network etc)
Street View
STOPPED WORKING UNEXPECTEDLY
Sync (Old)
STOPPED WORKING UNEXPECTEDLY
Sync History
STOPPED WORKING UNEXPECTEDLY
Testing
STOPPED WORKING UNEXPECTEDLY
Unlock Pattern
Brings up unlock pattern application
Voice Dialer
Activates the voice dialing program
Wi-Fi Settings
Brings up wi-fi settings from settings
Wireless Controls
brings up wireless controls (wi-fi, wi-fi settings, bluetooth, bluetooth settings etc)
YouTube
Brings up YouTube application
YouTube Settings
Allows you to clear YouTube search history
YouTube Tests
Brings up YouTubeTests (run all, search test)
damn thats a long list..thanks for documenting it for us buddy!
Battery Info, Device Info, and Phone Info have some real nice information.
goodwinm said:
Battery Info, Device Info, and Phone Info have some real nice information.
Click to expand...
Click to collapse
I have those along with status, phone status, SD Card, and Field Test on one of my screens.
Testing, brings up Phone information & Battery information
AnyCut is cool but I want to make something that has all that information in a collective app that i can just click and obtain info. A report would be nice too, like with the network diagnostics tool in BlackBerry OS.
Anyone know if there is a way to bring up a certain contact. I know its possible to make a direct call/sms shortcut. But i would like to be able to open the contact and then select call or sms. I dont like making 2 shortcuts for 1 contact
MArtijn
having used this before and creating a few short cuts. But creating this pic mes short cut is driving me mad. can it be done
Please tell me, how can i add that button in ginger? in stock rom i had that option to add that button.
All ROMs have that! In settings > Wireless & networks > Mobile networks
You can put it as a shortcut in the status bar in Settings > CM Settings > Interface > Notifiaction power widget > Widget buttons
You can even put it as a widget in you homescreen. Long press anywhere > widgets > power control
changed lockscreen style to sense and i cant change it back to ring... its selected but lockscreen is still sense, tried reboot etc.. didnt work
i also tried to change to other style, any of these doesnt work.
Tasker’s main menu offers commands and options that help you use and manage how the app works. Access the main menu via the capacitive Menu key or the virtual Menu button (three dots icon) at the upper-right corner of the screen. You’ll find these on the menu:
Browse Examples — redirects you to a list of pre-made example profiles, which you can download and import to Tasker.
Data — for clearing, backing up, or restoring backed up data.
Info — contains information about the app and how to use it.
Preferences — opens the Preferences page (more about this in the next section).
Enable/Disable Tasker — enables or disables Tasker.
Search Tasker — search data or feature within the app; not available in Beginner Mode.
Exit — closes the app.
Run An Action — performs a single action (e.g. maximizing screen brightness).
Run Log — records events and procedures done through the app.
Developer Options — advanced options for devs; not available in Beginner Mode.
Creates a private clipboard that cannot be read by other apps. You can also create and manage private notes.
TIP: by giving permission to use "accessibility service" you can copy and paste text to editable fields that do not offer the "three-dot" submenu.
Get it from Play store
To copy text to your secure clips:
Select the text to be copied.
In the context menu, select the icon to see further options - normally a three-dot icon.
Choose "Copy to SecClips".
Or, if you have given permission to use the "accessibility service", long click the selected text and click on the corresponding icon in the popup window.
To paste text from your secure clips:
Select the text to replace. If you don't want to replace an existing text you need to write a couple of characters and select them.
In the context menu, select the icon to see further options - normally a three-dot icon.
Choose "Paste from SecClips".
Or, if you have given permission to use the "accessibility service", long click the text field (even without selecting a text to replace) and click on the corresponding icon in the popup window.
To view and manage secure clips and notes:
Choose the corresponding icon at the top right of this page.
Or, choose "SecClips" in the context menu.
Or, use the quick settings tile "SecClips". You may need to give the application permission to create popup windows to use this feature.
Powered by EasyJoin.net
Update
v. 2.1
The accessibility settings of the device can be opened by a switch in the app.
Added locale for Russian.
Bug fixes and minor improvements.
Update
"Secure Clips" v. 2.0
Use the accessibility permissions in order to paste text to editable text fields. This permission is not required if the editable text fields offer the "three dots" context menu.
New setting to autoclose the popup window.
Bug fixes and minor improvements.
Can you explain how this differs from your previous app, PrivateClipboard? https://www.xda-developers.com/private-clipboard-mimic-android-10-privacy/
MishaalRahman said:
Can you explain how this differs from your previous app, PrivateClipboard? https://www.xda-developers.com/private-clipboard-mimic-android-10-privacy/
Click to expand...
Click to collapse
"Secure Clips" is a continuation of "Private Clipboard." Initially it was created for those users who had expressed the desire to donate for "Private Clipboard": in these cases I prefer to create a new paid app that offers something extra (like the black theme) from the free app, so those who donate can get something more.
One thing that some users have pointed out to me on "Private Clipboard" is that not all apps (editable fields) offer the " three dots" menu when you long click on an editable field. This practically prevented these users from using the app as they had no way to copy and paste text from the private clipboard.
On "Private Clipboard" I had no way to find a remedy since the precondition for this app is that it would not need to use any permission to work.
In "Secure Clips" I used the "accessibility service" to give the possibility to copy and paste text to all editable fields, even in those cases where the apps overwrite the system menu and do not offer the " three dots" submenu. So, when you long click on an editable field, you see both the menu offered by the system to copy/paste etc. and also a popup window offering copy/paste from the private clipboard. Note that the use of "accessibility service" is not necessary if the apps do not overwrite the system menu.
Update
v. 2.0.1
Optimized the logic to automatically show and hide the popup.
Fixed a problem with the non-visible item "SecClips" in the submenu "three dots".
Bug fixes and minor improvements.
Update
v. 2.0.2
Added locale for French, German, Greek, Italian, Portuguese and Spanish.
Bug fixes and minor improvements.
Update
v. 2.4
New setting to see abbreviated text in the "three dots" sub-menu. This option is useful when default entries are truncated.
You can delete all clips from the clipboard. You can find the functionality in the context menu located on the page where the clips are displayed.
Bug fixes and minor improvements.