So I have an S5570i that I need to fix, the problem is it goes through a bootloop and must remove the battery to completely turn it off, I can go on both Recovery and Download mode. Already tried doing the wipe data and wipe cache, still no luck. Also when I try to reboot from recovery, I got these messages.
-- Appling Multi-CSC --
E:failed to mount /data (Invalid argument)
E:copy_log_files_to_data :: can't mount /dataRebooting...
Then it goes through a bootloop.
So, my question is about these problems,
1. are there anymore suggestions on what I may do rather than flashing? (flashing is my last resort)
2. If I may flash, on what type of firmware do I need? how to know which kind I need?
info about the phone that I got on the back.
MODEL : GT-S5570I
FCC ID : A3LGTS5570I
SSN : -S5570IGSMH
MADE IN VIETNAM BY SAMSUNG (dunno if that helps on which region I need)
I also need links on what file I need for booting on a region that I need.
what version of Odin I need. (I have Odin3 v1.34)
A quick reply would really help me.
I assume you are on stock kernel/recovery.
If so, well, there isn't much you can do without flashing a new kernel or ROM.
You can try using the portable CWM. Try wiping again. If it fails still, flash a new ROM (should be AOSP to be safe).
If you want to flash the stock ROM back, use this link to find your firmware.
http://www.tsar3000.com/Joomla/inde...-pop-plus-firmware&catid=55:samsung&Itemid=82
The firmware is based on where you live, rather than where it is made.
Also, use Odin v1.84, not v1.34.
Sent from my CM7 GT-S5570I
typo, 1.84 is what i meant.
I live here in Philippines, don't know which firmware to choose, still. :silly:
Also tried flashing with the Official firmware (S5570IXILG1) Italy
still no luck, still gives me a bootloop and a message "can't mount /data" on recovery.
Clear chache thn dalvik cache and restore data
If I Helped You Please Press ThankS
myaservip said:
Clear chache thn dalvik cache and restore data
If I Helped You Please Press ThankS
Click to expand...
Click to collapse
Dude, he stated that he has already wiped data and cache.
And here, this is the portable CWM for GT-S5570I.
https://www.dropbox.com/s/czzxn3iyg4lo55l/pop_plus_CWM.zip
Flash a custom ROM from here. I assume that any ROM is good for you, so long as it works on your phone.
Oh ddsi ok let me think again..my study confusing me i miss many events
Muhammad Yaser
Egypt
18 Years
C++/HTML/Scripter
Pressing Thanks Dosen't cost You
Flash xxld6 rom
If I Helped You Please Press ThankS
---------- Post added at 09:45 AM ---------- Previous post was at 09:44 AM ----------
Cant mount data???
Use rio multi formater tool to format system . Data and cash to rfs yhen try flashing
If I Helped You Please Press ThankS
NightRaven49 said:
Dude, he stated that he has already wiped data and cache.
And here, this is the portable CWM for GT-S5570I.
https://www.dropbox.com/s/czzxn3iyg4lo55l/pop_plus_CWM.zip
Flash a custom ROM from here. I assume that any ROM is good for you, so long as it works on your phone.
Click to expand...
Click to collapse
Nevermind, I fixed my problem from a google search, this thread is very hard to find
In case someone gets checks in on this thread with the same issue, I suggest to follow the guide here.
This one fixed my problem, http://forum.xda-developers.com/showthread.php?t=2226030
Related
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
Hello, since I don't really like my custom rom (remics 1.4) I would like to install back my stock rom (normally the latest gingerbread since I couldn't do any update). But on sammobile I can't find any roms for my country, I'm from belgium. My phone isn't simlocked, I don't know if it has any use to know that?
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
abdelbachir said:
Btw, my phone is a galaxy s plus (GT-i9001)
Sorry for the double post
Click to expand...
Click to collapse
Here is a collection of an official Samsung released Roms:
Tutorial how to flash them HERE.
Thanks man, that's really helpful. So I can flash any of those roms without worying about being belgian or anything?
Should i format my phone before flashing those roms?
From my experience you should do a wipe/factory reset before Odin the stock Rom.
I have Odin a stock Rom without wipe and it didn't boot so I cf-root, wipe from recovery and booted.
Sent from my GT-I9100 using xda app-developers app
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
abdelbachir said:
Ok, so if I understand i should do : Wipe Data, Wipe Cache, Wipe Dalvik Cache and hop, I turn off my phone, go into download mode and flash the stock rom immediatly?
Click to expand...
Click to collapse
Exactly!:laugh:
Thanks man, you're a beast, really fast answer
sorry to bother you a bit more, but I prefer to be cautious with all of this, these roms, more precisely the XXKPU one (last in the list) is I think from poland? Does it have any importance? Since I am belgian, i need the french language haha
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
abdelbachir said:
Oi, guys, I really need help please!! I did wipe data/factory reset in clockworkmod, then i closed my phone and flashed the stock rom (XXKPU) with Odin. But now my phone isn't booting! Or more precisely, It's just the sequence with the "S" appearing that comes over and over again!! What did I do wrong and what can I do please??
Click to expand...
Click to collapse
Boot into cwm and either wipe data again or your are going to have to flash the stock again. I have had to do that in the past
Sent From My YP-G1 running ICS build 3.5
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
abdelbachir said:
I tried booting in cwm but I can't, failed like 5 times. A few tries, I got an android robot with some sort of opened box next to him.
Click to expand...
Click to collapse
This is your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 it contains everything you need to help you, get a better understanding of your phone
1) 19001 uses Odin 4.43
2) need AriesVe.ops file for flashing
3) IF CWM failed flash CWM 6.0
4) If boot failed flash a i9001 boot loader ( look in My Android collections , link below or use your WIKI)
Thanks a lot man, flashed the cwm in the phone, did a wipe data/factory reset and it works like a charm now. I'll defenitly do a bit of reading to understand my phone a looot better!
after doing this http://forum.xda-developers.com/showthread.php?t=1176927
and then reboot my phone stucks on samsung galaxy mini logo and never boots!
please help me
help
i forgot to do the step two please help me!
This is the S4 forum, not the Mini forum.
Help me please!
and i cant receive messages fast!
hi.
Moved to proper section.
Did u flash in stock recovery or CWM?
Go to Recovery mode and wipe factory data And wipe cache. It should work.
Venomstar said:
Go to Recovery mode and wipe factory data And wipe cache. It should work.
Click to expand...
Click to collapse
thanks ! its now working but the bluetooth and gps and video playback is not working :|
i dont know about the bugs. Every rom has bugs. And don't just say thanks press thanks .
did you try flashing it again?
galaxy mini help plz
hi there i have a samsung galaxy mini gt-s5570i but it turn it self off and wen i turned it bk on it just stays at the samsung logo so i tryed the reboot tec but it just keeps coming up with
E: failed to mount data <invalid argument>
E: copy_log_files_to_data : : can't mount /data
so then i tryed the odin mode but this dose not work eather it just says
product name: GT-S5570I
custon bin down:no(0 counts)
current bin:samsung officil
downloading do not turn off target
and i have left that on over night but nothing chages at all is there anything i can do or is my phone ready to be put in the bin would not be happy to bin it as not even had it a year yet hope someone can help me thank john
---------- Post added at 08:26 PM ---------- Previous post was at 08:17 PM ----------
android no.1 said:
did you try flashing it again?
Click to expand...
Click to collapse
dont no what that is sorry
Is cwm on your phone ? , if you have, just restore a nandroid and if you don't have just flash another rom
If you have stock recovery and wipe cache/data don't work you must use something like fastboot just google it or chearch in a bootloop category on xda
Your phone is not hard bricked its in a bootloop so you can repair it
Sent from my GT-S5570 using xda app-developers app
my solution
flash another rom and flash again rom which you like
Hi,
I was redirected to this part of the forum. A friend of mine rooted my samsung mobile Galaxy S I9000 with a android 2.2 version. I cannot contact him anymore to help me with the update and I am really a newbie in this rooting world. So, I am coming on this forum to have some advice. I read information on rooting your device, in which everything is explained very well, but could not find information on how to update once a device was rooted (probably I did not search in the right place). What I did so far is:
1) Taking backup of my pics (by manually drag and drop the folder on my pc), SMS and call logs (with sms backup + app), syncronized my contacts with gmail so that I can recover them later on and backup the music folder. I installed backup Titanium to back up my apps on my SD card.
But now, I am stuck with some questions (could you guide me where to find the information?):
1) Which most recent version of Android is supported on the device I have? Which version will work best?
2) Is there important information that I forgot to back up? + I have a problem with the backup Titanium app. It could reach my root in the beginning, but then the Superuser app updated the binary and from then on my titanium app got stuck when getting access to the root. Any idea how to solve this? Install an older version of the bin.file? How to do that exactly? thanks! => I could fix this problem by installing an older version of superuser in CW recovery. If others have problems with this issue, I can provide help from now on
3) Is there a guide with step by step procedure on which files I have to download on my pc and which procedure to follow? Or could you advice me some useful links?
thanks!
1) there is android 4.2.2 available for this amazing device
2) you propably forgot to backup efs folder
3)
- 1) follow this guide to get android 2.3.6 to your device: http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
- 2) follow this guide to get android 4.2.2 (cm 10.1) to your device after: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
- 3) now you can flash most of the roms you find in i9000 android development forum. i personally use slimrom
copy /efs! backup ur imei n md5 in efs first! copy da whole efs file! or do nandroid backup.
READ N FOLLOW CAREFULLY here
http://forum.xda-developers.com/showthread.php?t=2149455
considering u already done flashing Sammy n CF
prepare for ROM & kernel(optional) hunt! go to dev section and choose which JB u wanted.download it together with cm9.1.0 n copy to root of internal sd.
n make sure to flash cm9.1.0 stable from cyanogenmod website (galaxymtd) first from 2.3.6, first flash will bootloop, go back to recovery with 3 combo button. flash again n dont leave recovery.
after done flashing twice (if flash ended too quick, then flash again). direct flash 4.1/4.2 chosen rom, twice (first flash will come up with error, juz ignore it flash again (bootloop) recovery again n flash again
Sent from my GT-I9000 using xda premium
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Vauvenal7 said:
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Click to expand...
Click to collapse
maybe nope, but try mod urself by searching on theme n app section
Sent from my GT-I9000 using xda premium
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
mogwai123 said:
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
Click to expand...
Click to collapse
yap, its da same, but do some reading first
Sent from my GT-I9000 using xda premium
when I copy my efs folder, I see that it is empty. any idea? I should not proceed further? What should I do?
UPDATE: phone still finds my IMEI number when dialing *#06#
if ur imei intact, then leave it, i dont know which ROM ur using but try to see /efs with option show hidden in rooted file explorer
Sent from my GT-I9000 using xda premium
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
mogwai123 said:
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
Click to expand...
Click to collapse
Should I shut down my phone and try to put it in download mode again to put the JVU rom on it again via odin? is that the best strategy? Or should I do something else? and if that would work, what is then the best procedure to avoid such situations again?
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
compacity said:
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, thanks!!!! this worked!!! I justed flashed cm9 and it works. So, if I understand well now, I can just return in recovery mode and install from zip from sd card to cm10 and then for instance to slimrom? Or between 'two' flashes, I need to follow the last part of the procedure in the link you gave me? So:
"Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want..."
OR: can I just go to recovery mode and do install from zip without doing that procedure with "wipe" etc?
Just to know, as I am just a newbie in these things!!! But I want to thank you once again for the clear explanations and the good help!!!!
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
compacity said:
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
mogwai123 said:
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
Click to expand...
Click to collapse
as i already said, flash more than 2 times when upgrading, juz upgrading process. GB-ICS-JB (CM7-CM9-CM10/10.1) is upgrading process.
changing ROM not necessarily need double flashing, but u can do it if ur not satisfy whether da ROM already flashed or not
Sent from my GT-I9000 using xda premium
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
mogwai123 said:
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
Click to expand...
Click to collapse
Hmmm, is probably because I get this error when starting slimrom: invalid IMEI number...I flashed it a second time, but it gave me the same error...
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
wget21 said:
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I will have a look there for that google play problem.
More problematic is that problem of IMEI. When I flashed from CM 9 to CM10 I did not do that wipe of cache and data as suggested above (the reply came later on), and then I flashed slimrom. That I forgot to wipe between CM9 and CM10, can that be the cause of wrong IMEI now? Is the solution now, to wipe cache and data, to flash again CM 10 and to flash then slimrom again?
Or should I just leave everything like that and do a recovery of my efs folder? If yes, any link for this?
last week i tried in flash cm10 on my galaxy advance and then i lagged alot
so i flash to cm11 but i got boot loop:crying::crying:
last time i installed the cm11 it booted succesfully
jyling said:
last week i tried in flash cm10 on my galaxy advance and then i lagged alot
so i flash to cm11 but i got boot loop:crying::crying:
last time i installed the cm11 it booted succesfully
Click to expand...
Click to collapse
As far as i remember, you have to format /preload too. You did it?
Force said:
As far as i remember, you have to format /preload too. You did it?
Click to expand...
Click to collapse
Did you mean wipe data or format the whole phone
Sent from my GT-I9070 using XDA Free mobile app
jyling said:
Did you mean wipe data or format the whole phone
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
Go in recovery, wipe data and cache, then go to "mounts and storage" and format /preload. If it fail to format it, then unmount /preload and try to format it again and flash cm11.
Did you try this?
Go To Download Mode,
Flash Your Mobile Back To 4.1.2 make sure you repartition )
Root it , & then install CWM,
Format system, cache, data, dalvik
Go to advanced format, & then format everything except SD card & USB Storage.
& then install ROM )
It would defo work, sometimes your data remains in your mobile, which makes error )
If need any other help,
Feel free to PM me )
Force said:
Go in recovery, wipe data and cache, then go to "mounts and storage" and format /preload. If it fail to format it, then unmount /preload and try to format it again and flash cm11.
Did you try this?
Click to expand...
Click to collapse
sorry for the late rely,well i will try this after i finish downloading cm11 on my galaxy advance
DaniShabbir said:
Go To Download Mode,
Flash Your Mobile Back To 4.1.2 make sure you repartition )
Root it , & then install CWM,
Format system, cache, data, dalvik
Go to advanced format, & then format everything except SD card & USB Storage.
& then install ROM )
It would defo work, sometimes your data remains in your mobile, which makes error )
If need any other help,
Feel free to PM me )
Click to expand...
Click to collapse
i dont know man, i dont feel like to redo everything.i will try this if i have no option
flashing completed i need to wait for cm11 to boot
YES it finaly boot.
thanks Force,you save my day and i just realize i forgot to flash gapps:silly:.
btw i am happy that i dont need to roll back to 4.1.2 and root and.....
Thanks a million.
and i think this thread is useless now and i dont know how to remove thread
can you told me how to ?:silly::silly:
jyling said:
YES it finaly boot.
thanks Force,you save my day and i just realize i forgot to flash gapps:silly:.
btw i am happy that i dont need to roll back to 4.1.2 and root and.....
Thanks a million.
and i think this thread is useless now and i dont know how to remove thread
can you told me how to ?:silly::silly:
Click to expand...
Click to collapse
I'm happy to hear that you solved your problem
You can't remove the thread, but you can report it to an moderator, but don't do it. Maybe there are people who will have same problem and may find this thread.
Hello guys, I need help. My phone (samsung galaxy s advance) just goes to the boot menu every time i start it up. I was installing a cm-12.1 janice when this happened. I tried to restore my back up but it says "md5 mismatch" please help me fix my phone. :crying:
"
Newbie009 said:
Hello guys, I need help. My phone (samsung galaxy s advance) just goes to the boot menu every time i start it up. I was installing a cm-12.1 janice when this happened. I tried to restore my back up but it says "md5 mismatch" please help me fix my phone. :crying:
"
Click to expand...
Click to collapse
Md5 mismatch mean that the file is corrupted. Search on google for " md5 checker" and check the cm12 size and compare it to original md5. Then try to flash it again (repeating the correct flashing procedure, wrote in cm12 thread) , or if you want to go to stock jb 4.1.2 use ODIN program to do that, there are guides in general section of our phone forum, i don't have much time to write it or to search it and share it, but you can find it for sure.