I have a developer edition VZW moto x, bootloader is unlocked, i have the white warning screen upon boot telling me its unlocked, it has not yet been rooted, stock 4.4 kitkat and currently trying to install custom recovery, ive tried both twrp and the unofficial cwm recovery, i can get into bootloader through the cmd window, i get a response with adb devices showing its communicating, ive renamed the recovery files with a ".img" and no matter what i do i get the message "bootloader variable not supported" can someone please help me figure out what im doing wrong.
jaysdroid2 said:
I have a developer edition VZW moto x, bootloader is unlocked, i have the white warning screen upon boot telling me its unlocked, it has not yet been rooted, stock 4.4 kitkat and currently trying to install custom recovery, ive tried both twrp and the unofficial cwm recovery, i can get into bootloader through the cmd window, i get a response with adb devices showing its communicating, ive renamed the recovery files with a ".img" and no matter what i do i get the message "bootloader variable not supported" can someone please help me figure out what im doing wrong.
Click to expand...
Click to collapse
I believe you do not have to put the .IMG at the back of the files as they are already .IMG. Files
Are you using mfastboot?
The IMG file is in the same folder as mfastboot?
What are you typing in the cmd window
Sent on my Gummy running Lenoto X
well i installed the minimal ADB and fastboot installer with the adb and fastboot files in the zip, i extracted and installed, plug phone in USB debugging active, i type in command adb devices, get confirmation of device then type adb reboot bootloader, phone boots into bootloader, once in bootloader i type, fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img after which i get the error message, also when the file is saved, the .img is not there, ive done it as is and adding the .img to the end with the same result
jaysdroid2 said:
well i installed the minimal ADB and fastboot installer with the adb and fastboot files in the zip, i extracted and installed, plug phone in USB debugging active, i type in command adb devices, get confirmation of device then type adb reboot bootloader, phone boots into bootloader, once in bootloader i type, fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img after which i get the error message, also when the file is saved, the .img is not there, ive done it as is and adding the .img to the end with the same result
Click to expand...
Click to collapse
go here
http://forum.xda-developers.com/showthread.php?t=2603358
and look at the guide for unlocked bootloaders it should walk you though how to get it done correctly because you are spouse to use
MFastboot not fastboot.
alright, i got twrp installed, use mfastboot and had to add the .img to the end of the file, so i now have twrp installed, backups made and saved to my computer for the just in case, i hace access to twrp through rom manager, i am wondering if i can flash cwm using rom manager, the reason i ask is ive always used cwm with all my other phones and i just like using what i know and am comfortable with it, will i fudge everything up trying to use rom manager to flash cwm rather than the fastboot method.
p.s. thank you for the link and advise
jaysdroid2 said:
alright, i got twrp installed, use mfastboot and had to add the .img to the end of the file, so i now have twrp installed, backups made and saved to my computer for the just in case, i hace access to twrp through rom manager, i am wondering if i can flash cwm using rom manager, the reason i ask is ive always used cwm with all my other phones and i just like using what i know and am comfortable with it, will i fudge everything up trying to use rom manager to flash cwm rather than the fastboot method.
p.s. thank you for the link and advise
Click to expand...
Click to collapse
I have had issues with cwm restoring nandroids but I believe you need to flash it in the same manor
Sent on my Gummy running Lenoto X
so in other words i should just go ahead and keep twrp? at least until an official cwm is out?
jaysdroid2 said:
so in other words i should just go ahead and keep twrp? at least until an official cwm is out?
Click to expand...
Click to collapse
Haven't had one hiccup with twrp, actually prefer it over cwm
Sent on my Lenoto A2109 tablet
jaysdroid2 said:
so in other words i should just go ahead and keep twrp? at least until an official cwm is out?
Click to expand...
Click to collapse
you can try it if you every have to restore a nandroid backup and CWM fails all you have to do is flash TWRP and restore
here is a link to a CWM
Moto x thread
http://forum.xda-developers.com/showthread.php?t=2612149
dray_jr said:
you can try it if you every have to restore a nandroid backup and CWM fails all you have to do is flash TWRP and restore
here is a link to a CWM
Moto x thread
http://forum.xda-developers.com/showthread.php?t=2612149
Click to expand...
Click to collapse
May not work but I haven't tried it , cwm leaves the back up in the emulated sector in the sdcard
Sent on my Lenoto A2109 tablet
Related
I just received my moto x developer version. I must be an idiot because I can't find instructions on how to root it. Every post I can find is about rooting the locked version. People talk about the fact that I don't need an exploit because my boot loader is unlocked. I get that but I don't know how to root. Can someone kindly point me to a tutorial on how to root if my boot loader is already unlocked.
Install a recovery from the dev section. Either TWRP or CWM will be fine.
Then download SuperSU
flash supersu in recovery.
Moto x - Developer edition root
gunnyman said:
Install a recovery from the dev section. Either TWRP or CWM will be fine.
Then download SuperSU
flash supersu in recovery.
Click to expand...
Click to collapse
Thanks! I'll give it a shot. Much appreciated!
There are a few threads... but to elborate on what gunnyman has said... If your bootloader is unlocked, either Dev Edition, or you have a phone from a carrier like T-Mobile or Sprint that allow you to unlock via Moto's web site then its pretty easy to flash alternate recovery, and root from there.
Steps see -> https://plus.google.com/110773150384694258853/posts/VhtJtg92sTP (has links to the files you need too.) and there are threads in the General and Developer sections here too.
Same process works if you have 4.2.2 or 4.4 on your phone.
Is there a way to root the developer edition and keep stock recovery ?
Pete
Flash custom recovery, flash root package in custom recovery, re-flash stock recovery
Sent from my Moto X DE
pasta1234 said:
Is there a way to root the developer edition and keep stock recovery ?
Pete
Click to expand...
Click to collapse
You don't have to flash the custom recovery, just boot into it. Once you have the root .zip on your phone reboot into the bootloader and fastboot boot (recovery) and flash the root zip from there. You will have root and stock recovery.
The reason I'm asking is to retain the ability to recieve OTA updates ?
How does one boot into a custom recovery without loading it?
Pete
3UR0TR45H said:
You don't have to flash the custom recovery, just boot into it. Once you have the root .zip on your phone reboot into the bootloader and fastboot boot (recovery) and flash the root zip from there. You will have root and stock recovery.
Click to expand...
Click to collapse
pasta1234 said:
The reason I'm asking is to retain the ability to recieve OTA updates ?
How does one boot into a custom recovery without loading it?
Pete
Click to expand...
Click to collapse
When you enter the fastboot command, use "boot" instead of "flash" and it will just temporarily boot into the recovery without flashing over the stock partition. You can flash the root zip as normal and when you reboot your phone, the custom recovery will be gone.
As far as receiving OTAs, I'm not sure if you'll get them or not. If you go modifying things like kernel, ROM, or even things like the build.prop, chances are it won't work or will break something. The good thing about having an unlocked bootloader is that it's nearly impossible to hard-brick the device unless you're reckless.
Are you sure this works? When I try 'fastboot boot recovery.img' it gives me a "failed command" error. I kicked off another thread asking how to do this since this is what I typically do with Nexus devices. I know that fastboot now has a -c command that might help but I don't know the magic to put after -c to make it work.
If anyone has been able to 'fastboot boot recovery.img' on a Moto X, please lemme know. This would be my preferred path rather than flashing the custom recovery and then the stock recovery back.
3UR0TR45H said:
When you enter the fastboot command, use "boot" instead of "flash" and it will just temporarily boot into the recovery without flashing over the stock partition. You can flash the root zip as normal and when you reboot your phone, the custom recovery will be gone.
As far as receiving OTAs, I'm not sure if you'll get them or not. If you go modifying things like kernel, ROM, or even things like the build.prop, chances are it won't work or will break something. The good thing about having an unlocked bootloader is that it's nearly impossible to hard-brick the device unless you're reckless.
Click to expand...
Click to collapse
pboggini said:
Are you sure this works? When I try 'fastboot boot recovery.img' it gives me a "failed command" error.
Click to expand...
Click to collapse
What happens when you just type fastboot?
Sent from my XT1060 using Tapatalk
This has been said already but you can just "fastboot flash recovery twrp.img", flash your superuser zip then "fastboot flash recovery recovery.img". You are using the correct image name in the command, correct?
Yes, this was said in the thread I started but then I saw someone suggest what I'd been wanting to do. To answer the questions, if I just type fastboot it gives me the help output like it should, fastboot devices shows my device, fastboot reboot works, fastboot reboot-bootloader works, etc. Essentially, I believe that either there is a command string that I could hand to -c or this just won't work on MotoX's like it does all the Nexus devices that I've played with.
Fortunately I did hit Moto up and they gave me permission to download the 4.4 image so I do have the stock recovery.
Ryno77 said:
This has been said already but you can just "fastboot flash recovery twrp.img", flash your superuser zip then "fastboot flash recovery recovery.img". You are using the correct image name in the command, correct?
Click to expand...
Click to collapse
All,
I'm coming from a nexus environment where I've been able to do fastboot boot twrp-2.6.3.1-ghost-4.4.img rather than fastboot flash recovery twrp-2.6.3.1-ghost-4.4.img since I'm hoping to keep the stock recovery while installing supersu. It complains about "(bootloader) Command restricted" with the MotoX even though my bootloader is unlocked. Is this typical of Moto devices? Do I actually need to flash twrp, then supersu and then the stock recovery if that's the final result I want? FWIW, I want SU on it but I'd like to also receive future OTA updates w/o too much dorking around of at all possible.
thanks peterb
Are you using mfastboot or just regular fastboot?
I fastboot twrp no problem. I did however mfastboot the system.img . But to answer your question twrp will ask you if you want to root when you go to reboot.
Fastboot flash recovery twrp 2.6.3.1-ghost-4.4.img is the command, when you flash do not reboot the device to the system but boot into recovery instead, you should be good to go and twrp should ask if you wish to root, if not just download the flashable supersu zip
Sent on my Moto X
I understand that you should flash if you want to have TWRP installed on your phone but that's not what I want. I'd like to just boot into TWRP, install the SuperSU.zip and then boot back up as normal leaving the stock recovery in place so that I will continue to get OTA updates. I get that this is likely not the norm but it's what I did with my N4 to get SuperSu so that I could update boot.prop for flashing a hybrid radio. Doing this made it easier to get the phone back to OTA ready w/o having to flash the stock recovery back.
I found a couple of posts in the N4 where the fastboot command failed and you needed to start using the "-c" command. I was wondering if this was the problem I was running into. The argument for -c is a bit cryptic so I worry that the one I found is likely N4 specific:
fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img
Basically what I'm wondering is if anyone has been able to just boot into TWRP w/o actually flashing it to the recovery partition.
If this is not possible then I'll flash TWRP, root and then flash the stock recovery back on since I did get the stock 4.4 image from Motorola.
thanks peterb
flashallthetime said:
Fastboot flash recovery twrp 2.6.3.1-ghost-4.4.img is the command, when you flash do not reboot the device to the system but boot into recovery instead, you should be good to go and twrp should ask if you wish to root, if not just download the flashable supersu zip
Sent on my Moto X
Click to expand...
Click to collapse
Interested in this as well, for booting kernels. Device support has been hit-or-miss for me in the past.
And folks, he's asking about fastboot's ability to launch an image _without_ flashing. This is a somewhat esoteric/advanced use.
I'm interested in this too even though I have a locked Moto X.
I didn't know this was possible, huh. As for our device, it'll probably help if we can figure out what that -c command means.
Sent from my Moto-X (GSM DE) using the xda-developers app
thehockeydude44 said:
I didn't know this was possible, huh. As for our device, it'll probably help if we can figure out what that -c command means.
Sent from my Moto-X (GSM DE) using the xda-developers app
Click to expand...
Click to collapse
If I'm remembering right, google took the ability to boot a recovery without loading one away in 4.2. We tried to do this on the HTC 1 Google edition when we pulled its partitions to make a system dump. It failed.
OTA fails when the device is rooted, even if you have the stock recovery.
The OTA zip checks the system partition. If there is any single modification, it fails.
you can just:
- flash twrp to recovery partition
- reboot into recovery
- install supersu
- reboot into fastboot
- flash stock recovery
- reboot to system
you have installed supersu and still have stock recovery -> you can take OTAs
edit: i just read that even with stock recovery, if u are rooted the ota won't work
Yea, this is the other way to do it. It's just a bummer if one can't use the flexibility to just boot into recovery. Note that I still seem to be able to boot into custom recovery on my Nexus 4 that's running KitKat. I'm curious about the comment about not getting an OTA with su installed. I know that with a modified build.prop and radio, the N4 wouldn't update but I could adb sideload successfully once I put build.prop back and the stock radio on. I figured the OTA would just unroot and then I'd have to do the process again.
Anyway, this was my plan B, just would have preferred to boot recovery.
peterb
waiflih said:
you can just:
- flash twrp to recovery partition
- reboot into recovery
- install supersu
- reboot into fastboot
- flash stock recovery
- reboot to system
you have installed supersu and still have stock recovery -> you can take OTAs
edit: i just read that even with stock recovery, if u are rooted the ota won't work
Click to expand...
Click to collapse
if u want to "unroot" to take otas, u can just flash stock system
waiflih said:
you can just:
- flash twrp to recovery partition
- reboot into recovery
- install supersu
- reboot into fastboot
- flash stock recovery
- reboot to system
you have installed supersu and still have stock recovery -> you can take OTAs
edit: i just read that even with stock recovery, if u are rooted the ota won't work
Click to expand...
Click to collapse
I am interested in this as well. How do we get a copy of the stock recovery to reflash?
Also, I have had rooted stock and custom recoveries and have received OTA's before (but they were on Nexus devices).
droiddog said:
I am interested in this as well. How do we get a copy of the stock recovery to reflash?
Also, I have had rooted stock and custom recoveries and have received OTA's before (but they were on Nexus devices).
Click to expand...
Click to collapse
you can take it from the the file used in rsdlite, according to you fw version
The only reason I want the stock recovery is because I think you can't remotely lock or erase your device on a custom recovery. Does anyone know anything to the contrary? Thanks.
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
ReproOne said:
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
Click to expand...
Click to collapse
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
Thank you for the reply. I thought about taking that approach, but I was really hoping someone would have an answer on why the procedure wasn't working now. My bootloader is still unlocked.
I found this as an approach someone did on the Nexus 4 for a similar issue:
fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img
Thoughts?
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
ReproOne said:
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
Click to expand...
Click to collapse
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Thank you for those steps. I do not have an external SD card installed, so I modified it to store the recovery.img on sdcard instead.
Now I can always fastboot flash twrp and then back to stock recovery.
Thank you again!
nfinitefx45 said:
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Click to expand...
Click to collapse
You would need root to do this. Not being able to use "fastboot boot" you would just be backing up the flashed recovery. Possibly towel root temp root, but I would assume it has been patched in newest update.
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
neudof said:
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
Click to expand...
Click to collapse
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
xPhantom said:
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
Click to expand...
Click to collapse
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
neudof said:
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
Click to expand...
Click to collapse
Yes, after the OTA, just flash TWRP back through fastboot and then re-flash SuperSU to get root back.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
I just applied the update released today, and I tried to save the recovery.img file before flashing TWRP. However, it kept giving me permission denied. Do you have the recovery.img file from the update released today so I can use it for the next update?
fastboot not working
please any help on how to access fastboot on HTC one m8.
its showing black screen n fastboot mode...
wot can I do 2 annul d problem
rooting problem
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
jinal shah said:
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
Click to expand...
Click to collapse
What's the output in the terminal when you fastboot flash recovery?
rooting problem
It doesn't show any error as such.
In the command window it shows successful.
But when I click on recovery it reboots back to fast boot.
Like for a second it shows the screen which reads 'this build is only for developers'
But then instead of opening Twrp it reboots back to fast boot.
Not really sure what I'm doing wrong. Last rooted phone was a Nexus 5, and that was of course painless to root and flash ROMs to...
I'm using a Verizon XT1096 with 5.1 on T-Mobile.
So I was able to get the bootloader unlocked via Motorola's website, now that Verizon is allowing them to do so. No problems there. My problem now is that I can flash a recovery, but if it reboots, the recovery is gone. And I can't get any recoveries to flash anything. I can't push an apk, root zip, or even a ROM. Says Installation Aborted, with no other error codes. Even tried CWM and disabling Signature Checking, which gives me more info, saying that the footer is mismatched. Phone does say the bootloader is unlocked though so that shouldn't be it...
Honestly, I'd just like to get it on CM12 until I can get a Nexus 6P.. Can anyone tell me if I'm doing something wrong? Or is there just no way to root yet? I figured even the XT1095 CF-Auto-Root method would work for 5.1, but no dice..
Not sure what to do here. Please move my thread if need be. Don't post here much...
I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html
There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.
RepeatUntilTheEnd said:
I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html
Click to expand...
Click to collapse
I thought I tried that but maybe not. I've read that some stock ROMs can and will overwrite the recovery upon booting, but I could be wrong. I'll look at that when I get home tonight.
oraixearl said:
There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.
Click to expand...
Click to collapse
Thank you, I'll try this tonight when I get home. This may solve it. I think I remember the bootloader spitting something out about a partition mismatch.. Will report back as soon as I try it.
So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!
TsarProdigy said:
So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!
Click to expand...
Click to collapse
Strange as it worked for me. I'm glad you got it sorted out tho. Cheers.
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Type: fastboot boot (path goes here)
You can drag and drop the twrp img into the command window. This will ensure you have the correct path
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
mingkee said:
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
joesee said:
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
Click to expand...
Click to collapse
The instruction shows how to flash recovery.img with TWRP though I have no clue how to do it.
I got that error the first time I did it, it was because of a misspelling of the command.
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Vseprz said:
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Click to expand...
Click to collapse
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
joesee said:
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
Click to expand...
Click to collapse
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Vseprz said:
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Click to expand...
Click to collapse
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
joesee said:
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
Click to expand...
Click to collapse
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
99problemz said:
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
If boot loader is unlocked you should load twrp from fastboot.
Vseprz said:
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
If boot loader is unlocked you should load twrp from fastboot.
Click to expand...
Click to collapse
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
joesee said:
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
Click to expand...
Click to collapse
I'm glad it all worked out! :good:
finding I have to re-flash with flashify each time
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
jdoebean said:
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
Click to expand...
Click to collapse
You drop the twrp file
In fastboot folder open command prompt and flash twrp first just rename it simply to recovery.img while in the fastboot folder
Type fastboot flash recovery recovery.img
Or just fastboot flash recovery.img
Then it should boot you into twrp
Once booting into twrp flash the supersu zip in your internal sd
Once you have root and reboot all you have to do is use flashify app and download twrp from the app and flash it Twrp sticks from there.
Sent from my LGMS631 using XDA Free mobile app