Database Develop

Problem when rooting Custom Rom

Hi guys!
I received my Nexus yesterday en immediately rooted and unlocked the device. No problems so far.
I want to install a the cyanogen custom rom on my nexus but get stuck in the recovery step.
I have used the tutorial from Theunlockr . com (unfortunately I cant insert a link here because Im a new member)
Because I already rooted and unlocked my Nexus I started with ''III. Flash the Custom ROM''. I managed to start up the bootloader and click on 'Recovery'. Here the problems start, after clicking on 'recovery' a screen with a yellow exclamation shows up. (see attachment for screenshot)
Can somebody help me with flashing my Nexus with a custom rom? Thanks in advance!

Try to run "fastboot boot recovery.img" and see if that works. (Something like that anyway)
This was what I did for all my time using Amon's 1.5.3 recovery. Now that I'm on 1.6.0, I can use the normal recovery. That worked perfectly for me anyway. I also would always boot to that screen when attempting the normal recovery via the phone.

Do you have small tutorial or how-to how I can run 'flashboot boot recovery.img'' on my Mac?
I am quite an android-noob.

Stinosss_31 said:
Do you have small tutorial or how-to how I can run 'flashboot boot recovery.img'' ?
I am quite an android-noob.
Click to expand...
Click to collapse
So am I
To run fastboot, you should simply go find the Android SDK download. Once you've downloaded that, make your way to the tools folder. Place the recovery image in that folder and then Shift+Right Click in the window. You click the option to bring up a command prompt.
In that Command prompt, type flashboot devices and verify the PC sees your phone. If so, then you can do the Flashboot command. Though you may need USB drivers. If you do need them, they're somewhere in this forum, but I've completely lost track of them.
P.S. if my initial command doesn't work... You might need to try "fastboot boot recovery recovery.img"
(Note... Don't try "Flashboot".. That was a typo )

Stinosss_31 said:
Do you have small tutorial or how-to how I can run 'flashboot boot recovery.img'' ?
I am quite an android-noob.
Click to expand...
Click to collapse
got this info from the same site you posted, you just skipped the step before you started to flash the rom altogether.
II. Flash a Custom Recovery Image
1. Download the Nexus One Amon Ra Recovery Image below:
Nexus One Recovery Image (Link under Download in the first Post)
2. Save the recovery image file inside the superboot folder you used to root the phone.
3. Turn the phone off and then plug it in via USB cable.
4. Turn it on by holding down Power and the Trackball to get into fastboot mode.
5. Open a command prompt and type the following with hitting enter at the end of each line:
cd\
cd c:\superboot
fastboot-windows devices
*this is to check that the computer can see the phone (a serial should pop up if it can)
6. Then type:
fastboot-windows flash recovery recovery-RA-nexus-v1.5.3.img
7. This should flash the recovery image onto the phone.
Click to expand...
Click to collapse
The recovery img is in this thread
http://forum.xda-developers.com/showthread.php?t=611829
Click to expand...
Click to collapse
Also, you don't really need the android sdk for flashing the recovery img, but it's a good idea to download it for future use.

Can ANYONE just stop answering threads that are in wrong sections?

lazinase said:
Can ANYONE just stop answering threads that are in wrong sections?
Click to expand...
Click to collapse
Why? So that it gets moved and answered anyway? The sooner the guy gets helped out... The sooner the post gets buried.
A mod will be by to do their duty later. As the community, we may as well help in the mean time.
Man, oh man. Niceness has really lost some popularity in the virtual world, hasn't it...

Stinosss_31 said:
Do you have small tutorial or how-to how I can run 'flashboot boot recovery.img'' on my Mac?
I am quite an android-noob.
Click to expand...
Click to collapse
If you use a Mac, you don't deserve help. Bootcamp Windows and we'll talk.

grainysand said:
If you use a Mac, you don't deserve help. Bootcamp Windows and we'll talk.
Click to expand...
Click to collapse
great help!
for a mac just use ./fastboot-mac in the terminal

Like they said, sounds like you are missing recovery. Just do the step two, you skipped it. Why flame people? He is new, might as well help, instead of making this thread longer by telling him to post in right section.
Besides, he did find tutorials and followed them, he didn't come here completely unprepared and expecting people to walk him through. We all make mistakes sometimes, specially when dealing with something we are new to, he simply skipped a step.

MOD EDIT - Thread moved to Q&A

[Q] Bricked phone?

I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. can someone please help me?

Have you tried flashing the ROM back over itself without wiping? Try that first, and if that won't work, do a full format and reflash the ROM and you should be good to go.
And just an FYI, you really can't fully brick your phone by flashing a ROM or theme. You can always get it back.

Do what ranger suggested.
To elaborate, I *think* as long as your phone turns on, it is not bricked. Specifically, as long as you can boot to recovery you can do whatever you need to do, be it make fixes or start from scratch again. (I think even if you can't boot to recovery, but it turns on, you can run the RUU ). The only way to brick is to flash a wrong/corrupt radio or anything below the radio level.

Wipe then reboot and wait. When you change the framework, initial boot takes longer.
Sent from my HERO200 using XDA Premium App

I can't even get to the recovery mode screen. it'll only take me to where i can select hboot, fastboot, or wipe. nothing else will load up past that.

What key combination are you using? Hold home then depress end key/power key until phone vibrates.
Sent from my HERO200 using XDA Premium App

Load the fast boot ruu flash
Done
zbach said:
I can't even get to the recovery mode screen. it'll only take me to where i can select hboot, fastboot, or wipe. nothing else will load up past that.
Click to expand...
Click to collapse
Sent from my HTC Hero CDMA using XDA App

mahalocat said:
Load the fast boot ruu flash
Done
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
I can't select that option. Sorry for being kind of new at this, it just loads a bunch of green letters down really quick, telling me it can't find HERCIMG.zip/HERCDIAG.zip files. under that, it says no image or wrong image?

zbach said:
I can't select that option. Sorry for being kind of new at this, it just loads a bunch of green letters down really quick, telling me it can't find HERCIMG.zip/HERCDIAG.zip files. under that, it says no image or wrong image?
Click to expand...
Click to collapse
I am guessing you're not s-off, try this:
http://forum.xda-developers.com/showthread.php?t=958968

il Duce said:
I am guessing you're not s-off, try this:
http://forum.xda-developers.com/showthread.php?t=958968
Click to expand...
Click to collapse
I don't see the command to run "fastboot oem rebootRUU"

zbach said:
I don't see the command to run "fastboot oem rebootRUU"
Click to expand...
Click to collapse
It's a cmd prompt for windows. Open your command prompt from windows, with the phone plugged in usb, and then follow the steps in the OP of that thread.

il Duce said:
It's a cmd prompt for windows. Open your command prompt from windows, with the phone plugged in usb, and then follow the steps in the OP of that thread.
Click to expand...
Click to collapse
it keeps telling me fastboot is an unrecognized command. i have to be doing something wrong here.

zbach said:
it keeps telling me fastboot is an unrecognized command. i have to be doing something wrong here.
Click to expand...
Click to collapse
did you do the adb command first, like it says?

il Duce said:
did you do the adb command first, like it says?
Click to expand...
Click to collapse
yeah, it won't recognize that either. i'm selecting the right path to my C drive too. the driver just isnt recognized :/

You have to go further than just the C drive you have to specify the path all the way to the android-sdk-windows directory. If your on Vista, find the folder, hold the shift key and right click. Then select open a command line here.
EDIT: Yeah you need the drivers installed as well.
I had this happen to me a week ago. Luckily the phone rebooted and I was able to re-flash another recovery using the terminal emulator.

wild1z said:
You have to go further than just the C drive you have to specify the path all the way to the android-sdk-windows directory. If your on Vista, find the folder, hold the shift key and right click. Then select open a command line here.
EDIT: Yeah you need the drivers installed as well.
I had this happen to me a week ago. Luckily the phone rebooted and I was able to re-flash another recovery using the terminal emulator.
Click to expand...
Click to collapse
okay, i'm in now. i'm on the rebootRUU black and silver screen on my phone, but when i go to flash another .zip file, it says can't upload. do i need to download one from somewhere, or place it in a different folder?
I'm on my computer working through my command prompt by the way.

zbach said:
okay, i'm in now. i'm on the rebootRUU black and silver screen on my phone, but when i go to flash another .zip file, it says can't upload. do i need to download one from somewhere, or place it in a different folder?
I'm on my computer working through my command prompt by the way.
Click to expand...
Click to collapse
I've never actually done this fyi, but I think you need the RUU from htc.com, it would probably be under support, then hero cdma? DL that, and input the command "fastboot flash zip correctnameofhtcRUU.zip" in your cmd.

okay, i found and am currently downloading the file. so i should just have to root it to my SD, then flash it, right?
I'm really hoping this works.

il Duce said:
I've never actually done this fyi, but I think you need the RUU from htc.com, it would probably be under support, then hero cdma? DL that, and input the command "fastboot flash zip correctnameofhtcRUU.zip" in your cmd.
Click to expand...
Click to collapse
still nothing. it only tells me its and error, and cannot load the .zip file.

zbach said:
still nothing. it only tells me its and error, and cannot load the .zip file.
Click to expand...
Click to collapse
I don't know where the file should be located, but your posts in the other thread will yield better answers, jason knows the way better than me, given he started the thread. Wait for his response. I assume the error has something to do with where you have the ruu and what path you need to specify in the cmd. Wish I could be of more help. Once you fix it and get back to rooted and such, I HIGHLY recommend you get s-off, its basically like idiot-proofing your phone (no offense) so you can fix anything.
sent from a series of tubes.

[Q] Rooting problems

Hello XDA I'm new to these forums but i'm hoping you can help me out.
So basically I was following a youtube video I was linked to by a guide on here on how to root my One. and everything was going smoothly and then i got to the stage where i was to boot into recovery mode so i could load into twrp. But what happens on my phone now is the loading screen for recovery mode where it says for developers only ect. will just hang there for a while then the phone will shut off and boot back into regular mode. could use some help. I wouldn't mind resetting and starting fresh if that's what's needed im just not sure how to. thank you guys!

Kdenery said:
Hello XDA I'm new to these forums but i'm hoping you can help me out.
So basically I was following a youtube video I was linked to by a guide on here on how to root my One. and everything was going smoothly and then i got to the stage where i was to boot into recovery mode so i could load into twrp. But what happens on my phone now is the loading screen for recovery mode where it says for developers only ect. will just hang there for a while then the phone will shut off and boot back into regular mode. could use some help. I wouldn't mind resetting and starting fresh if that's what's needed im just not sure how to. thank you guys!
Click to expand...
Click to collapse
read this: http://forum.xda-developers.com/showthread.php?t=1435228
you will need to reflash recovery using fastboot/adb

Aldo101t said:
read this: http://forum.xda-developers.com/showthread.php?t=1435228
you will need to reflash recovery using fastboot/adb
Click to expand...
Click to collapse
first problem, how do i select charge only? and second when i try the first command code posted it just wouldn't work and when i tried it while the phone was slected on fastboot usb (just incase that would work) it said no device.

Ok i figured it out i did everything in that thread. the same thing is happening. it just says entering recovery then restarts in normal mode.

Kdenery said:
Ok i figured it out i did everything in that thread. the same thing is happening. it just says entering recovery then restarts in normal mode.
Click to expand...
Click to collapse
do you have sdk tools installed on your computer.
make sure usb debugging is on, apperently you do.
did you put the recovery image in the folder where fastboot is then run cmd(as administrator) and cd to that folder(example/:cd c:/Program Files/Android/android-sdk/platform-tools or where ever you have it)then adb reboot bootloader>enter----Then fastboot flash recovery(name of recovery image).img>enter--- then type fastboot reboot recovery

If you are unlocked already, watch this https://www.youtube.com/watch?v=rRkAHw_GmIs&feature=youtube_gdata_player
Sent from my HTCONE using Tapatalk 4 Beta

Aldo101t said:
do you have sdk tools installed on your computer.
make sure usb debugging is on, apperently you do.
did you put the recovery image in the folder where fastboot is then run cmd(as administrator) and cd to that folder(example/:cd c:/Program Files/Android/android-sdk/platform-tools or where ever you have it)then adb reboot bootloader>enter----Then fastboot flash recovery(name of recovery image).img>enter--- then type fastboot reboot recovery
Click to expand...
Click to collapse
yes. the problem is that it just stalls out on the entering recovery screen. with the htc logo and motto in the middle.

Kdenery said:
yes. the problem is that it just stalls out on the entering recovery screen. with the htc logo and motto in the middle.
Click to expand...
Click to collapse
which recovery are you installing if its twrp v2.6.0.0 try 2.5.0.0 there was a bug in the 2.6 don't know if they fixed it yet.

Aldo101t said:
which recovery are you installing if its twrp v2.6.0.0 try 2.5.0.0 there was a bug in the 2.6 don't know if they fixed it yet.
Click to expand...
Click to collapse
I tried this yesterday after installing 2.6.0.1 when the problem first happened. then i tried 2.6.0.0 then 2.5.0.0 the problem never went away and today i tried clockwork recovery. same thing. do i need to delete the images i've flashed onto it? if no how?

Kdenery said:
I tried this yesterday after installing 2.6.0.1 when the problem first happened. then i tried 2.6.0.0 then 2.5.0.0 the problem never went away and today i tried clockwork recovery. same thing. do i need to delete the images i've flashed onto it? if no how?
Click to expand...
Click to collapse
no i wouldn't think you do, it just overwrites the other, you're sure your bootloader is unlocked, check in settings under development option to make sure debugging is on.man you got me stumped here.

Kdenery said:
I tried this yesterday after installing 2.6.0.1 when the problem first happened. then i tried 2.6.0.0 then 2.5.0.0 the problem never went away and today i tried clockwork recovery. same thing. do i need to delete the images i've flashed onto it? if no how?
Click to expand...
Click to collapse
Are you typing "fastboot erase cache" without the quotes after you flash the recovery?

Aldo101t said:
no i wouldn't think you do, it just overwrites the other, you're sure your bootloader is unlocked, check in settings under development option to make sure debugging is on.man you got me stumped here.
Click to expand...
Click to collapse
I retried the whole process once more and made sure usb debugging was on and its just frozen again.

bigdaddy619 said:
Are you typing "fastboot erase cache" without the quotes after you flash the recovery?
Click to expand...
Click to collapse
Just tried and made sure to do this. same problem.

Perhaps i'm just being extremely retarded. I am unlocked but not rooted, i thought this was how to get rooted. but maybe im just far off.

Kdenery said:
Perhaps i'm just being extremely retarded. I am unlocked but not rooted, i thought this was how to get rooted. but maybe im just far off.
Click to expand...
Click to collapse
NO, you are NOT retarded, you install recovery, then su to get root, for all intent and purposes you're doing it all right, just can't figure out why it's not working, one more redundant question, you have fastboot under power settings disabled?? Just tryin to cover all the bases
you are installing the recovery for the m7wls(m7spr)?

Aldo101t said:
NO, you are NOT retarded, you install recovery, then su to get root, for all intent and purposes you're doing it all right, just can't figure out why it's not working, one more redundant question, you have fastboot under power settings disabled?? Just tryin to cover all the bases
you are installing the recovery for the m7wls(m7spr)?
Click to expand...
Click to collapse
fast boot is not checked. and i think/hope so, how do i check that?

Kdenery said:
fast boot is not checked. and i think/hope so, how do i check that?
Click to expand...
Click to collapse
in settings under power scroll to the bottom fastboot is there.

Sorry i guess i phrased that wrong. i'm sure fastboot is unchecked, i was asking about the second part of your post, about "you are installing the recovery for the m7wls(m7spr)?"

Kdenery said:
Sorry i guess i phrased that wrong. i'm sure fastboot is unchecked, i was asking about the second part of your post, about "you are installing the recovery for the m7wls(m7spr)?"
Click to expand...
Click to collapse
what exactly is the zip you're using,should be something like(fastboot flash recovery openrecovery-twrp-2.5.0.0-m7wls.img

I've tried
cwm-recovery-vivow
openrecovery-twrp-2.5.0.0-m7
openrecovery-twrp-2.6.0.0-m7
openrecovery-twrp-2.6.0.0-m7wls
openrecovery-twrp-2.6.0.1-m7
recovery-clockwork-6.0.3.2-m7spr
recovery-clockwork-touch-6.0.3.3-m7spr

[Q] HTC One, tampered, unlocked, S-ON, no OS, device not foun on laptop. Cluster****.

Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!

PrimalMK said:
Hi xda!
I recently got a HTC One from a friend, as my old phone was worn out. It turned out he had rooted it, tampered with it, the whole nine yards. I was not told he had rooted it, so I accepted a prompt asking me to update the phone to what I believe was 4.4.2, KitKat. I now realize that should not have been done. When the phone restarted it went to the HTC startup logo, into a kind of blue screen (not the BSOD), the Google logo flashed on the screen for 0.5 seconds, and then it got stuck on this weird blue/turqoise screen. Nothing happened.
I called my friend, he told me he rooted it etc., and that I should try a factory reset, and if that didn't work, complete reset (including the system folder wipe). That obviously didn't work, but I didn't know any better as I have never touched a rooted phone in my life, and I'm thus a complete noob when it comes to terminology, what steps to take and so on.
Now I have a phone with no OS, stuck at the HTC logo when I start it normally, and all I can do is boot up into bootloader. I can also access TWRP. I have installed HTC Sync on my laptop, but the phone is not detected properly (meaning, the "device connected" sound is played, and I can find "Android device" in device manager, but the HTC Sync can't find the phone) when connected through a USB. It is not the USB that came with the phone. I also installed Squabbi's HTC One toolkit, which basically is the one-click interface of pushing revone etc. to the phone. Problem is, "error, device not detected".
I've browsed around for a good six hours without any luck, other than that I've started to understand how this is all connected.
Phone is
*TAMPERED*
*UNLOCKED*
M7_UL
S-ON
HBOOT 1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
I pray to the mighty tech gods of xda to help me out. I looked for similar threads, couldn't find any that were simple and similar enough for me to understand. I must admit I'm very keen to learn this, so if someone know of any place where basic terminology is explained, I'd really appreciate that. Other than that, a step by step instruction on how to proceed from this cluster**** would also be highly appreciated (what I need installed on my laptop, where I can find ROM's, what flashing means etc.).
Thank you in advance!
Click to expand...
Click to collapse
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs

clsA said:
well a lot of the work seems to already be done
your unlocked / rooted which means you should have a custom recovery installed.
boot the phone by holding the power + volume down
this will bring up the bootloader. use the volume key to choose recovery aand hit the power button. when you boot into recovery come back and report the name and version of recovery. I.E. Teamwin recovery 2.5.0.0 or clockworkmod 6.0.3.1 ...I'll be here the next couple hrs
Click to expand...
Click to collapse
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version of TWRP does not work. I have no preferences when it comes to OS's. A stock OS (is OS and ROM the same thing?) would be fine.

Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.

PrimalMK said:
Version of TWRP is 2.5.0.0. Currently trying to re-install an OS. Need one that the current version of TWRP can flash to the phone, as flashing a new version does not work. I have no preferences. A stock OS (is OS and ROM the same thing?) would be fine.
Click to expand...
Click to collapse
Well your going to need adb / fastboot on your PC
use mine here >> https://www.dropbox.com/s/0wzwt8843zx27nh/Fastboot.zip
and install the HTC Drivers here >> http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe
unzip that to c:\ so you have c:\fastboot in windows explorer
now inside the folder you shift + right click / command prompt here
now you have a command prompt window type
fastboot getvar all
and post the result here / minus your serial number and IMEI
then i can find you the correct recovery and rom for your phone
---------- Post added at 08:04 PM ---------- Previous post was at 08:02 PM ----------
PrimalMK said:
Also, found out that doing stuff on a Windows 7 laptop was easier than on my own Windows 8. The phone is at least detected on the Windows 7, which means I will be able to flash stuff to it through cmd, something I wasn't able to do from the Windows 8.
Click to expand...
Click to collapse
yes window 8 will be a problem till you get another hboot above 1.44/1.54
hboot 1.55 has no problem on windows 8 ( I use windows 8.1)

clsA said:
instructions
Click to expand...
Click to collapse
Downloaded fastboot, unzipped in c:
Drivers from that link are classed as malware. Trying to find earlier drivers/other mirror.

Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.

PrimalMK said:
Find attachment.
Still looking for drivers. Apparently "every" browser blocks exe-files from being downloaded. Changed settings, managed to download it, run as admin. No response.
Click to expand...
Click to collapse
this will work fine
just put TWRP and the Rom in the fastboot folder
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse

clsA said:
this will work fine
just put TWRP and the Rom in the fastboot folder
Click to expand...
Click to collapse
error: cannot open 'openrecovery.......img'
What to do?

PrimalMK said:
error: cannot open 'openrecovery.......img'
What to do?
Click to expand...
Click to collapse
is it in the fastboot folder ?

clsA said:
is it in the fastboot folder ?
Click to expand...
Click to collapse
Yes, see screenshot.

PrimalMK said:
Yes, see screenshot.
Click to expand...
Click to collapse
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?

clsA said:
is the command window in c:\fastboot ?
did you copy paste the command or try and type it ?
Click to expand...
Click to collapse
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?

PrimalMK said:
My bad. Managed to run it, but then it crashes straight away. Can that have anything to do with the driver not installed?
Click to expand...
Click to collapse
fastboot crashes ?
no if fastboot getvar worked it will all work
it's only 4 commands and your phone will be working
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
adb sideload rom.zip
sideload takes about 8 min

calculation icatkg
clsA said:
fastboot crashes ?
no if fastboot getvar worked it will all work
Click to expand...
Click to collapse
Restarted a couple of times etc. It worked. Will do the ROM thing now.

PrimalMK said:
Restarted a couple of times etc. It worked. Will do the ROM thing now.
Click to expand...
Click to collapse
great your about done ...your phone will be android 4.3 when it finishes
don't take any updates to the OS

cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:

PrimalMK said:
cmd said it sent the ROM to the phone. I was in the TWRP adb sideload on my phone when it was transferred. Then that was it. 100% on cmd. Phone shut down. Suddenly discovered I had to install on the phone. WAT. I do so, then wait until completion. I anxiously restart the phone. It's alive again!
Really, thanks so much clsA! You made me a very happy person! :victory:
Click to expand...
Click to collapse
no problem, hit the thanks button

[Q] HTC One bricked

So I was messing around with ROMs for my HTC one and I have destroyed my phone ;(
I think I forgot to update firmware before installing a new ROM and now I can't get past the fastboot page. It doesn't power on, it goes directly to the fastboot page, and no matter what button I push, it vibrates, shows the "HTC Screen " for about 2 seconds, then re-directs straight back to the fastboot page, I can't even get in to the recovery, any suggestions?
-Ben

naecomc said:
So I was messing around with ROMs for my HTC one and I have destroyed my phone ;(
I think I forgot to update firmware before installing a new ROM and now I can't get past the fastboot page. It doesn't power on, it goes directly to the fastboot page, and no matter what button I push, it vibrates, shows the "HTC Screen " for about 2 seconds, then re-directs straight back to the fastboot page, I can't even get in to the recovery, any suggestions?
-Ben
Click to expand...
Click to collapse
Can you please post the out put from
Code:
fastboot getvar all
Please remove imei and serial numbers before posting.
What Rom did you flash and which recovery did you use(name and version please)? Links if possible :good:

can't get adb to work :/
and it's been around 2 months since I did this so I don't remember which ROM it was, though I think it was the viper ROM, and I use clockwork recovery

naecomc said:
can't get adb to work :/
and it's been around 2 months since I did this so I don't remember which ROM it was, though I think it was the viper ROM, and I use clockwork recovery
Click to expand...
Click to collapse
What OS do you have on your pc. If Windows, what is the phone listed as in device manager. It should be "MY HTC" If its Unknown you need to fix your drivers.
Maybe its a problem with adb itself, What exactly is the problem. Any error messages?

Danny201281 said:
What OS do you have on your pc. If Windows, what is the phone listed as in device manager. It should be "MY HTC" If its Unknown you need to fix your drivers.
Maybe its a problem with adb itself, What exactly is the problem. Any error messages?
Click to expand...
Click to collapse
got adb to work

Download the correct ruu for your device, check that the mid's and Cid's match.
There's a lot of guides that tell you how to flash ruu's

naecomc said:
got adb to work
Click to expand...
Click to collapse
Ok so your device is Sprint. Since its been some time like this it could be difficult to figure out exactly what went wrong so it is best to start by returning the device to stock with and ruu. You should be able to use this one
https://www.androidfilehost.com/?fid=23329332407573774
Download and unzip it you should get a windows .exe file.
Reboot your device to the bootloader and connect your usb cable. The phone should be in fastboot usb mode. In the command window type
Code:
fastboot erase cache
fastboot oem lock
fastboot reboot-bootloader
Wait for it to reboot and go back to fastboot usb then run the ARU.exe. It will return your device to stock.
If you get problems running the ruu let me know. It may be necessary to flash a firmware package to get it to run, but we'll cross that bridge if we come to it :good:

First of all, thank you so much for all your help on this, means a lot.
Now, I did the fastboot commands, but the ruu program freezes whenever I run it after it starts sending the updates

naecomc said:
First of all, thank you so much for all your help on this, means a lot.
Now, I did the fastboot commands, but the ruu program freezes whenever I run it after it starts sending the updates
Click to expand...
Click to collapse
Do you have HTCSync installed. If so uninstall it but leave drivers installed. Reboot and run the RUU again

Nope, no HTCSync installed

also, fastboot works but adb doesn't which is weird

naecomc said:
also, fastboot works but adb doesn't which is weird
Click to expand...
Click to collapse
It depends how your using adb. Fastboot works only in the bootloader.
Adb works only in recovery mode.
As I suspected you'll need to flash the firmware before the ruu will run. Give me a moment link and instructions to follow . If the bootloader is still relocked leave it that way. It needs to be relocked to flash the firmware also.
Edit:-
Download this firmware zip and put it in your fastboot folder. Rename it "firmware.zip"
https://www.androidfilehost.com/?fid=23329332407573774
Reboot the phone into the bootloader and connect fastbootusb. In the fastboot command line type.
Code:
fastboot erase cache
fastboot oem rebootRUU
**---case sensitive ---^^^
Your phone will reboot to a black screen with silver HTC logo. This is ruu mode we can now flash the firmware.
Code:
fastboot flash zip firmware.zip
The first flash is just a pre-update. The screen will go off and then return to ruu mode. Flash the zip again immediately.
Code:
fastboot flash zip firmware.zip
The second flash will flash the firmware, the progress bar on the screen will not reach 100% this is normal as long as the command line has finished it's output it's done.
Code:
fastboot reboot-bootloader
with the phone still in the bootloader connected with fastboot usb run the RUU exe on your pc.
After that your software will be completely stock. You should also be able to update with OTA updates Let me know how that goes :good:

dont think that's the right link, thats the link to the RUU

naecomc said:
dont think that's the right link, thats the link to the RUU
Click to expand...
Click to collapse
Lol sorry dude my bad, here's the right link https://www.androidfilehost.com/?fid=23329332407568410

I love you, phone's back to stock, thank you so much

naecomc said:
I love you, phone's back to stock, thank you so much
Click to expand...
Click to collapse
Your Welcome Glad you got it sorted. :good:

I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?

naecomc said:
I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?
Click to expand...
Click to collapse
Sorry I'm not sure how to make that work, I have no first hand experiance with Sprint devices. I know there designed to use a CDMA network. And that they can be used on a GSM Network but I've no idea how to get that to work.
Hopefully someone will come along who does. Maybe @clsA @alray or @nkk71 can help with that?

naecomc said:
I can't seem to get my UK Sim card to work in the phone while it's stock, is there a ROM you would recommend flashing to fix that?
Click to expand...
Click to collapse
Danny201281 said:
Sorry I'm not sure how to make that work, I have no first hand experiance with Sprint devices. I know there designed to use a CDMA network. And that they can be used on a GSM Network but I've no idea how to get that to work.
Hopefully someone will come along who does. Maybe @clsA @alray or @nkk71 can help with that?
Click to expand...
Click to collapse
Not sure about this either, but you should check the Sprint section(s) http://forum.xda-developers.com/sprint-htc-one
(probably in the General section)
maybe this: http://forum.xda-developers.com/showthread.php?t=2586704
I havent read through it completely, just glanced at it, so make sure, that's what you need

nkk71 said:
Not sure about this either, but you should check the Sprint section(s) http://forum.xda-developers.com/sprint-htc-one
(probably in the General section)
maybe this: http://forum.xda-developers.com/showthread.php?t=2586704
I havent read through it completely, just glanced at it, so make sure, that's what you need
Click to expand...
Click to collapse
Theirs also this
http://forum.xda-developers.com/showthread.php?t=2647305