Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
I noticed that my phone with this LOCKED status, though I unlocked it.
To start the fastboot I run the code the tutorial I mentioned above, then it displays the following screen
Code:
[COLOR="Red"]Failed to hab check for gpt_main: 0x4e
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found[/COLOR]
[COLOR="DarkOrange"]Fastboot Reason: Invalid CID[/COLOR]
For both methods to recovery, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
[COLOR="DarkOrange"]getvar max-download-size
downloading 32768 bytes
done
getvar max-download-size
downloading 1643008 bytes[/COLOR]
[COLOR="Red"]downgraded security version
update aboot version failed[/COLOR]
Can anyone help me?
------------
Problem solved thanks to XDA's amazing users!
feelknOck said:
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
For both methods, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
downgraded security version
aboot version update failed
Can anyone help me?
Click to expand...
Click to collapse
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
---------- Post added at 04:31 PM ---------- Previous post was at 04:18 PM ----------
Did it worked??S i am too not quite sure about this??
manav113 said:
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
Click to expand...
Click to collapse
I tried to recover via RSD several times, both with 4.4, as 4.2.2, but both have the same error.
In the RSD panel the following error message:
Code:
Failed flash process. 2/13 flash mootboot "motoboot.img" -> Phone returned FAIL.
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
manav113 said:
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
Click to expand...
Click to collapse
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
I'm downloading and post the result. 202 KB/s
Thank you!
-
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
Sorry for double post there.
I remember that my device is the XT1058, but Brazil.
I downloaded the sbf, removed the max-download-size and run the RSD, but he brought me the same errors.
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Steve-x said:
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Click to expand...
Click to collapse
Excuse me, but why do you think?
I did not get to install 4.4.2, I started to run the script flashall.bat 4.2.2 and thinking it would give time, it ended up damaging the bootloader.
Tried the firm indicated that dray_jr and 2 BR's, but it did not work.
I am very worried.
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
flashallthetime said:
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I was going to try and probably would work (I've done this several times and has no secret), but it was not to start. I opened flashall.bat script but forgot to close it, because it was going back up yet, but the script detected the fastboot and started the process.
With seconds I removed the cable, barely gave it to start the first stage (before I left without turning back) and corrupted my bootloader.
I had the Original ROM 4.4 installed with root and unlocked bootloader, but even trying the 4.4 firmware I get the errors I described above.
Would have something to do with the tutorial I follow to start the fastboot?
I am Brazilian and even translating and reading what little I understand, I can not identify a problem as well. I'm scouring all here and trying something, but like I said, I am a layman and do not understand how the bootloader and related work.
Steve-x said:
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
Click to expand...
Click to collapse
With 2 firmwares I get the same error.
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
He removed the cable as it was flashing, can you get to the fastboot screen?
Sent on my Gummy running Lenoto X
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
1. Yes, I was running 4.4 with unlocked bootloader and rooted
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
flashallthetime said:
He removed the cable as it was flashing, can you get to the fastboot screen?
Click to expand...
Click to collapse
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
feelknOck said:
1. Yes, I was running 4.4 and unlocked bootloader routed.
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
Click to expand...
Click to collapse
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
danger2u said:
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
Click to expand...
Click to collapse
Before having this problem I tried all that.
I installed the original recovery and tried to upgrade to 4.4.2 but it gave error in the middle of the update and restarted the phone saying that the software update was not completed.
dray_jr said:
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
Click to expand...
Click to collapse
I will remove the line from gpt and try again.
Earlier I was testing at work and now I'm home. The 4.4 firmware download this lingering: (
you really can't cause anymore problems so this is what i would try because from what i have read if you try to install 4.2.2 or 4.4 you the a gpt.bin verification error. which means that neither 4.2.2 or 4.4 are the right bootloader.
That leaves us with some how the 4.4.2 bootloader got installed because it is the only bootloader that can't go to 4.4 so with that being said.
I would download the correct 4.4 firmware for your phone.
extract it
and use the below adb commands to install it but leave out the gpt.bin flash command
Code:
*leave this one out*fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
i think everything should install fine and your phone should boot up and from what i have read you should still be able to take the 4.4.2 OTA without bricking your phone
Related
So I used the 4.4 root tutorial without any problems and then flashed the 4.4.2 update via sdcard.
The deal is that my supersu seems to be damaged, thought I still have root, the xposed framework can´t seem to receive supersu permission.
So I want to downgrade to the 4.4.
How should I do this?
alemonte said:
So I used the 4.4 root tutorial without any problems and then flashed the 4.4.2 update via sdcard.
The deal is that my supersu seems to be damaged, thought I still have root, the xposed framework can´t seem to receive supersu permission.
So I want to downgrade to the 4.4.
How should I do this?
Click to expand...
Click to collapse
Term "Downgrade" refers to "lowering" you version, in this case from 4.4 to 4.2.2. Now you just need to go back to 4.4
I am not sure whether your bootloader unlocked or not and what you version is, but I think this one will help http://forum.xda-developers.com/showthread.php?t=2603358 or this one http://forum.xda-developers.com/showthread.php?t=2538896
okaban said:
Term "Downgrade" refers to "lowering" you version, in this case from 4.4 to 4.2.2. Now you just need to go back to 4.4
I am not sure whether your bootloader unlocked or not and what you version is, but I think this one will help http://forum.xda-developers.com/showthread.php?t=2603358 or this one http://forum.xda-developers.com/showthread.php?t=2538896
Click to expand...
Click to collapse
Ok, so I have a locked bootloader. My guess is that I have the last version since I made the update to 4.4.2.
By having a locked bootloader I think I can´t downgrade to 4.2.2, right?
So I wanted to go back to 4.4 by following the commands below:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
But right on the first fastboot, I get this error:
downgraded security version
Update gpt_main version failed
preflash validation for GPT
alemonte said:
Ok, so I have a locked bootloader. My guess is that I have the last version since I made the update to 4.4.2.
By having a locked bootloader I think I can´t downgrade to 4.2.2, right?
So I wanted to go back to 4.4 by following the commands below:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
But right on the first fastboot, I get this error:
downgraded security version
Update gpt_main version failed
preflash validation for GPT
Click to expand...
Click to collapse
you can't go back to the complete 4.4 package and honestly im not even going to tell you how to get 4.4 running because i wont be responsible for you hardbricking your phone.
4.4.2 has a new bootloader and 4.4 has a diffrent bootloader you cant downgrade the 4.4.2 bootloader at all. it is a one way street sorry
dray_jr said:
you can't go back to the complete 4.4 package and honestly im not even going to tell you how to get 4.4 running because i wont be responsible for you hardbricking your phone.
4.4.2 has a new bootloader and 4.4 has a diffrent bootloader you cant downgrade the 4.4.2 bootloader at all. it is a one way street sorry
Click to expand...
Click to collapse
OK! I know I messed up updating to 4.4.2 rooted. Should've stayed on 4.4 but my X was having issues after disconnecting from Wifi to connect to LTE. Anyways..I´ll be returning the phone and getting a new one today! Tnks a lot for the help!
alemonte said:
Ok, so I have a locked bootloader. My guess is that I have the last version since I made the update to 4.4.2.
By having a locked bootloader I think I can´t downgrade to 4.2.2, right?
So I wanted to go back to 4.4 by following the commands below:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
But right on the first fastboot, I get this error:
downgraded security version
Update gpt_main version failed
preflash validation for GPT
Click to expand...
Click to collapse
Most likely you tried to downgrade to the very first 4.2.2 (.31 in case of XT1058). It's not possible. You need the one after, with camera update (.54 for XT1058, for example, http://sbf.droid-developers.org/phone.php?device=0)
okaban said:
Most likely you tried to downgrade to the very first 4.2.2 (.31 in case of XT1058). It's not possible. You need the one after, with camera update (.54 for XT1058, for example, http://sbf.droid-developers.org/phone.php?device=0)
Click to expand...
Click to collapse
please dont downgrade to 4.2.2 camera update downgrade to 4.4 you just have to not flash the gpt file but flash everything else.
if you flash 4.2.2 Camera update and then take the OTA for 4.4 you will brick your phone.
dray_jr said:
please dont downgrade to 4.2.2 camera update downgrade to 4.4 you just have to not flash the gpt file but flash everything else.
if you flash 4.2.2 Camera update and then take the OTA for 4.4 you will brick your phone.
Click to expand...
Click to collapse
So, is it possible to go from 4.4.2 to 4.4 without bricking or not? Just asking for clarification because of
4.4.2 has a new bootloader and 4.4 has a diffrent bootloader you cant downgrade the 4.4.2 bootloader at all. it is a one way street sorry
Click to expand...
Click to collapse
okaban said:
Term "Downgrade" refers to "lowering" you version, in this case from 4.4 to 4.2.2. Now you just need to go back to 4.4
I am not sure whether your bootloader unlocked or not and what you version is, but I think this one will help http://forum.xda-developers.com/showthread.php?t=2603358 or this one http://forum.xda-developers.com/showthread.php?t=2538896
Click to expand...
Click to collapse
Please do not advise any users to downgrade!
It is well documented that if you downgrade to ANY version, once on 4.4.2, you will brick your phone! It is literally all over the Moto X forums.
Wouldn't you feel awful if the OP followed your advice and bricked their phone???
---------- Post added at 09:03 PM ---------- Previous post was at 09:00 PM ----------
EchoHelix said:
So, is it possible to go from 4.4.2 to 4.4 without bricking or not? Just asking for clarification because of
Click to expand...
Click to collapse
NO! I have no idea why anyone would advise you to do that.....
Whatever exploit you had used to root on 4.4 does not work on 4.4.2
The only way to root (and achieve write-protect-disable), now that you are on 4.4.2 is to unlock the bootloader. Even with unlocked bootloader, you still can't downgrade without bricking.
I'll just add my two cents as well....as perfectly said already above....I'll just add....
NO. Do not ever try to downgrade to any version if you are on 4.4.2 or higher already. Unless you don't care at all if you brick and have the cash for a new phone or an old phone you'd be happy using again.
No. Some will debate this, and they should keep it to themselves.....unless they are offering to replace your phone if their advice bricks you. ?
---------- Post added at 03:21 PM ---------- Previous post was at 03:17 PM ----------
@okaban , please do not advice people to downgrade, or lead them to believe its safe.
If you want to try it, go ahead....but keep it to yourself. Too many aren't confident with this stuff and will end up with a paperweight because you led them to believe they could do it.
So please, do not suggest downgrading. Its irresponsible and hazardous advice.
Thanks! ?
samwathegreat said:
Please do not advise any users to downgrade!
It is well documented that if you downgrade to ANY version, once on 4.4.2, you will brick your phone! It is literally all over the Moto X forums.
[cut]
The only way to root (and achieve write-protect-disable), now that you are on 4.4.2 is to unlock the bootloader. Even with unlocked bootloader, you still can't downgrade without bricking.
Click to expand...
Click to collapse
KJ said:
I'll just add my two cents as well....as perfectly said already above....I'll just add....
NO. Do not ever try to downgrade to any version if you are on 4.4.2 or higher already. Unless you don't care at all if you brick and have the cash for a new phone or an old phone you'd be happy using again.
No. Some will debate this, and they should keep it to themselves.....unless they are offering to replace your phone if their advice bricks you. ?
Click to expand...
Click to collapse
Sorry, quoted because I wanted to try and emphasize this advice... and add...
The GPT.BIN in 4.4.3 has been updated as well.. so Once you have either 4.4.2 or 4.4.3 on your phone, DO NOT ATTEMPT TO DOWNGRADE!!!
If you try and downgrade only "parts" things wont work properly... example: Those who had 4.4.2 and downgraded only system.img and boot.img found issues going settings -> security... (it kicked them out). And other flakey things happened. When they attempted to update, things got worse.
4.4.4 will likely see updates to motoboot.img(bootloader) and GPT.BIN(partition table)... So the same warnings will apply.
It does NOT matter if your bootloader is unlocked or not. These same warnings and caveats apply!!
KidJoe said:
Sorry, quoted because I wanted to try and emphasize this advice... and add...
The GPT.BIN in 4.4.3 has been updated as well.. so Once you have either 4.4.2 or 4.4.3 on your phone, DO NOT ATTEMPT TO DOWNGRADE!!!
If you try and downgrade only "parts" things wont work properly... example: Those who had 4.4.2 and downgraded only system.img and boot.img found issues going settings -> security... (it kicked them out). And other flakey things happened. When they attempted to update, things got worse.
4.4.4 will likely see updates to motoboot.img(bootloader) and GPT.BIN(partition table)... So the same warnings will apply.
It does NOT matter if your bootloader is unlocked or not. These same warnings and caveats apply!!
Click to expand...
Click to collapse
Good point at the end. After 4.4.2....some thought their unlocked phone was immune to these warnings.....or their dev edition....which every one should know now is no different than any other unlocked phone. Aside from intact warranty.
Great addition KidJoe! Doesn't matter the phone, locked, unlocked or dev edition......none can safely downgrade.
The moto x is nothing like a Nexus in this regard.
Hi Guys,
I am in a bit of a problem. My Moto X has unlocked bootloader and rooted with custom recovery (twrp). So i can't update to 4.4.4 from OTA so i want to unroot and lock my bootloader (going back to everything stock).
I tried this method but it failed at first two steps.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot oem lock
i recommend wiping your device also but that is up to you if you dont want
to then skip the next two commands and just type the reboot command
fastboot erase userdata
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
The firmware which i am trying to install is:
"Android 4.4.2 Blur_Version.161.44.32.ghost_sprint.Sprint.en.US ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml"
My fastboot/bootloader with the error i am getting along with My phone information is attached below.
Need your help what should i do now.
Usama Ahmed said:
Hi Guys,
I am in a bit of a problem. My Moto X has unlocked bootloader and rooted with custom recovery (twrp). So i can't update to 4.4.4 from OTA so i want to unroot and lock my bootloader (going back to everything stock).
I tried this method but it failed at first two steps.
The firmware which i am trying to install is:
"Android 4.4.2 Blur_Version.161.44.32.ghost_sprint.Sprint.en.US ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml"
My fastboot/bootloader with the error i am getting along with My phone information is attached below.
Need your help what should i do now.
Click to expand...
Click to collapse
You should NOT re-lock the bootloader. Leave it unlocked. The phone will update just fine with unlocked BL. Just flash back to stock (what ever version you have on the phone now), then take the new OTA update.
Afterwards you can re-root if you want to.
Once again: You do NOT need to lock the BL - for any reason.
EDIT: Just looked at your pictures. Your phone is in BAD shape -- you should have never attempted to downgrade. This will be difficult to recover. I suggest asking for help in the "debricking" thread in the General sub-forum.
Good Luck.
It looks to me like you WERE on the 4.4.4 or above bootloader, and you flashed just the 4.4.2 system and boot.img at some point. Now, going back to full 4.4.2, you have downgraded the Bootloader and partition table. That is a no-no.
samwathegreat said:
You should NOT re-lock the bootloader. Leave it unlocked. The phone will update just fine with unlocked BL. Just flash back to stock (what ever version you have on the phone now), then take the new OTA update.
Afterwards you can re-root if you want to.
Once again: You do NOT need to lock the BL - for any reason.
EDIT: Just looked at your pictures. Your phone is in BAD shape -- you should have never attempted to downgrade. This will be difficult to recover. I suggest asking for help in the "debricking" thread in the General sub-forum.
Good Luck.
It looks to me like you WERE on the 4.4.4 or above bootloader, and you flashed just the 4.4.2 system and boot.img at some point. Now, going back to full 4.4.2, you have downgraded the Bootloader and partition table. That is a no-no.
Click to expand...
Click to collapse
I have bought the phone in this shape so i don't know what the previous owner did to it. What if i use donot touch bootloader but just use Super SU (Full Unroot) option to unroot and flash stock recovery img from "ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml" file, then will i be able to install OTA update of 4.4.4?
Usama Ahmed said:
I have bought the phone in this shape so i don't know what the previous owner did to it. What if i use donot touch bootloader but just use Super SU (Full Unroot) option to unroot and flash stock recovery img from "ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml" file, then will i be able to install OTA update of 4.4.4?
Click to expand...
Click to collapse
Don't take the OTA. Just try to flash the full 4.4.4 SBF!
You can find the full 4.4.4 Sprint SBF at one of the links here: http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347
samwathegreat said:
Don't take the OTA. Just try to flash the full 4.4.4 SBF!
You can find the full 4.4.4 Sprint SBF at one of the links here: http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347
Click to expand...
Click to collapse
Ok i am getting a little scared right now. I don't want to brick my device. I have found one firmware which i think should be okay to go with.
ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip
Do you think i should go with it? Is their any chance of getting bricked? I have posted my system information picture above so you can see if it will be compatible with it.
Usama Ahmed said:
Ok i am getting a little scared right now. I don't want to brick my device. I have found one firmware which i think should be okay to go with.
ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip
Do you think i should go with it? Is their any chance of getting bricked? I have posted my system information picture above so you can see if it will be compatible with it.
Click to expand...
Click to collapse
The previous owner has left you with mismatched partitions. This state is known to be at risk of bricking....
Your safest option is to attempt to flash the 4.4.4 SBF (yes you linked the right file), but even this is not without risk. It might work perfectly fine, and you might end up having to de-brick it.
Wish I could give you a more definite answer, but anything other than flashing the full 4.4.4 SBF is very dangerous. Even flashing the entire 4.4.4 SBF has some risk.
Good Luck.
samwathegreat said:
The previous owner has left you with mismatched partitions. This state is known to be at risk of bricking....
Your safest option is to attempt to flash the 4.4.4 SBF (yes you linked the right file), but even this is not without risk. It might work perfectly fine, and you might end up having to de-brick it.
Wish I could give you a more definite answer, but anything other than flashing the full 4.4.4 SBF is very dangerous. Even flashing the entire 4.4.4 SBF has some risk.
Good Luck.
Click to expand...
Click to collapse
Thanks alot for your help. If you think there is even a slight chance of hard brick than i will stay with the current rom i have.
One last question, I you were in my position, would you go for flashing 4.4.4 SBF or would you just leave it as it is?
Usama Ahmed said:
Ok i am getting a little scared right now. I don't want to brick my device. I have found one firmware which i think should be okay to go with.
ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip
Do you think i should go with it? Is their any chance of getting bricked? I have posted my system information picture above so you can see if it will be compatible with it.
Click to expand...
Click to collapse
@samwathegreat is correct. You are trying to downgrade, hence the errors and problems. The key here is the screen shot of AP Fastboot, where the second line shows 30.B7 which is the bootloader for 4.4.4. So at this point, you only want to flash a 4.4.4 SBF, and never flash anything lower.
That does appear to be the correct 4.4.4 if you have a 2013 or First Gen... Sprint X.
I suggest you flash using mFastboot with the extra steps as listed in Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html However, if you are unsuccessful doing that, then you're going to need to visit the Unbricking thread and see if that can help you get fixed up.
KidJoe said:
@samwathegreat is correct. You are trying to downgrade, hence the errors and problems. The key here is the screen shot of AP Fastboot, where the second line shows 30.B7 which is the bootloader for 4.4.4. So at this point, you only want to flash a 4.4.4 SBF, and never flash anything lower.
That does appear to be the correct 4.4.4 if you have a 2013 or First Gen... Sprint X.
I suggest you flash using mFastboot with the extra steps as listed in Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html However, if you are unsuccessful doing that, then you're going to need to visit the Unbricking thread and see if that can help you get fixed up.
Click to expand...
Click to collapse
Hi KidJoe! Thanks for your reply. What can i post to confirm if i have chosen the right SBF for my phone (Yes it is Moto X First-Gen).
This is the file i am downloading right now. "ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip"
And if i flash it with what you mentioned, is their a chance of bricking my device?
BTW i try to flash "ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml" with the same method you posted which resulted in error due to the problem you mentioned above.
Usama Ahmed said:
Hi KidJoe! Thanks for your reply. What can i post to confirm if i have chosen the right SBF for my phone (Yes it is Moto X First-Gen).
This is the file i am downloading right now. "ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip"
And if i flash it with what you mentioned, is their a chance of bricking my device?
Click to expand...
Click to collapse
Your first screen shot in Post 1 shows your phone has 161.44.32.ghost_sprint.Sprint.en.US. In other words, Sprint rom. So you should be able to flash the Sprint 4.4.4 you found.
Ideally you want to look at the FINE PRINT on the bottom of the back of the phone. It will have a model, like XT1056, XT1060, XTT1049, XT1053, etc. The other option, if you have the original box, check the label on the end of it. If the IMEI number printed on the label, matches what phone shows in its menus, then that label on the box should also tell you the model (the box for my Verizon X has MOTXT1060DEV on the bar code label.), Since you got yours used, its VERY important you confirm that is the original box when trying to use the box to confirm the model number!
As for risks of bricking... well, that is an unknown. There have been MANY bricks caused when users got them selves into the situation your phone is in. There is no 100% risk free process to try and recover. And that is why there are so many warnings telling people to NOT DOWN GRADE!!!
What I'm suggesting has worked, but you are correct, there is still a chance to brick. Taking an OTA in the state your phone is in also has a risk of bricking. Anything you try and do at this point also have a risk of bricking.
Usama Ahmed said:
BTW i try to flash "ghost_sprint-user-4.4.2-KXA20.16-1.32-37-release-keys-cid9.xml" with the same method you posted which resulted in error due to the problem you mentioned above.
Click to expand...
Click to collapse
Yes. The phone will ERROR if you try to flash an older GPT.BIN which is what you are encountering. (bootloader version indicates you had 4.4.4 on your phone, including its GPT.BIN and Bootloader).
The problem is this...
The Phone's previous owner had a FULL 4.4.4 ROM flashed to the phone. They attempted to downgrade. Since GPT.BIN and MOTOBOOT.IMG can not be downgraded, they did only PARTS!! Now the phone has mismatched bootloader, partition table and other parts compared to the older "System" and such which are installed.
KidJoe said:
Your first screen shot in Post 1 shows your phone has 161.44.32.ghost_sprint.Sprint.en.US. In other words, Sprint rom. So you should be able to flash the Sprint 4.4.4 you found.
Ideally you want to look at the FINE PRINT on the bottom of the back of the phone. It will have a model, like XT1056, XT1060, XTT1049, XT1053, etc. The other option, if you have the original box, check the label on the end of it. If the IMEI number printed on the label, matches what phone shows in its menus, then that label on the box should also tell you the model (the box for my Verizon X has MOTXT1060DEV on the bar code label.), Since you got yours used, its VERY important you confirm that is the original box when trying to use the box to confirm the model number!
As for risks of bricking... well, that is an unknown. There have been MANY bricks caused when users got them selves into the situation your phone is in. There is no 100% risk free process to try and recover. And that is why there are so many warnings telling people to NOT DOWN GRADE!!!
What I'm suggesting has worked, but you are correct, there is still a chance to brick. Taking an OTA in the state your phone is in also has a risk of bricking. Anything you try and do at this point also have a risk of bricking.
Yes. The phone will ERROR if you try to flash an older GPT.BIN which is what you are encountering. (bootloader version indicates you had 4.4.4 on your phone, including its GPT.BIN and Bootloader).
The problem is this...
The Phone's previous owner had a FULL 4.4.4 ROM flashed to the phone. They attempted to downgrade. Since GPT.BIN and MOTOBOOT.IMG can not be downgraded, they did only PARTS!! Now the phone has mismatched bootloader, partition table and other parts compared to the older "System" and such which are installed.
Click to expand...
Click to collapse
The model no written on back is XT1056. Just to be sure i have also attached the picture below. I am currently downloading "ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip".
Should i go for all these cmds?
mfastboot getvar max-download-size
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot reboot-bootloader
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot reboot
Click to expand...
Click to collapse
Also in this process, is their chance of my phone dead?
Will these cmds also lock my bootloader or should i just leave it unlocked? As currently my phone has unlocked bootloader and is rooted.
A step by step (maximum safe steps) for flashing would be greatly appreciated.
Usama Ahmed said:
The model no written on back is XT1056. Just to be sure i have also attached the picture below. I am currently downloading "ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip".
Should i go for all these cmds?
Also in this process, is their chance of my phone dead?
Will these cmds also lock my bootloader or should i just leave it unlocked? As currently my phone has unlocked bootloader and is rooted.
A step by step (maximum safe steps) for flashing would be greatly appreciated.
Click to expand...
Click to collapse
XT1056 is Sprint. So ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip is the right ROM to use.
use EVERY COMMAND AS STATED in the link. If successful, all parts will be back in line, and consistent.
As I said, yes there is a chance you can brick your phone. Many other things can brick your phone while you are in this state too. There is no 100% "Safe" and "guaranteed to not brick your phone" process when you are in this state.
This process will NOT lock your bootloader. And samwathegreat already told you there is no need to re-lock it.
KidJoe said:
XT1056 is Sprint. So ghost_sprint-user-4.4.4-KXA21.12-L1.28-28-release-keys-cid9.xml.zip is the right ROM to use.
use EVERY COMMAND AS STATED in the link. If successful, all parts will be back in line, and consistent.
As I said, yes there is a chance you can brick your phone. Many other things can brick your phone while you are in this state too. There is no 100% "Safe" and "guaranteed to not brick your phone" process when you are in this state.
This process will NOT lock your bootloader. And samwathegreat already told you there is no need to re-lock it.
Click to expand...
Click to collapse
Ok then i will be trying it right now and see what happens.
Thanks alot to @samwathegreat and @KidJoe. I have successfully updated my Moto X to 4.4.4 KitKat. I hope it had solved mismatched bootloader, partition table and other parts as mentioned by @KidJoe.
Attachment of process is below.
Usama Ahmed said:
Thanks alot to @samwathegreat and @KidJoe. I have successfully updated my Moto X to 4.4.4 KitKat. I hope it had solved mismatched bootloader, partition table and other parts as mentioned by @KidJoe.
Attachment of process is below.
Click to expand...
Click to collapse
Screen shot starts when system.img is flashing, so as long as the commands above that were also done and didn't error out, you are good!
Excellent support here! @samwathegreat and @KidJoe are GREAT!
KidJoe said:
Screen shot starts when system.img is flashing, so as long as the commands above that were also done and didn't error out, you are good!
Click to expand...
Click to collapse
Sorry i didn't realize that. Yes everything part was flashed without error otherwise i wouldn't go further.
But i am in a new problem now. My sim card is not working now. It says "Your SIM card does not allow a connection to this network". If anyone can help regarding that or if i can flash something to make it work.
Usama Ahmed said:
But i am in a new problem now. My sim card is not working now. It says "Your SIM card does not allow a connection to this network". If anyone can help regarding that or if i can flash something to make it work.
Click to expand...
Click to collapse
it appears you're not using sprint as your carrier... So You may now have to run this process to SIM unlock -> http://forum.xda-developers.com/moto-x/general/guide-success-sim-unlock-sprint-xt1056-t2825155
KidJoe said:
it appears you're not using sprint as your carrier... So You may now have to run this process to SIM unlock -> http://forum.xda-developers.com/moto-x/general/guide-success-sim-unlock-sprint-xt1056-t2825155
Click to expand...
Click to collapse
Yes i am not using sprint as my carrier. Thanks alot for the help again. I will try this now and post the result.
After attempting to upgrade rom stock KIT KAT 4.4.4 to 5.0.2 Lollipop over the air, I can not start the cell.
It is only on this screen "Fastboot Reason: Invalid CID".
It is not possible to go into bootloader, Flash attempts unsuccessfully by RSD Lite 6.1.5 and mfasboot.
In this case how to proceed.
View attachment 3306441
Looks more like you tried to downgrade which you cannot do
renatomuniz2015 said:
After attempting to upgrade rom stock KIT KAT 4.4.4 to 5.0.2 Lollipop over the air, I can not start the cell.
It is only on this screen "Fastboot Reason: Invalid CID".
It is not possible to go into bootloader, Flash attempts unsuccessfully by RSD Lite 6.1.5 and mfasboot.
In this case how to proceed.
View attachment 3306441
Click to expand...
Click to collapse
@WillisD is 100% correct...
Notice the message in the first shot?
Code:
downgraded security version
update gpt_main version failed
preflash vaildation failed for GPT
And the shot showing the top of the AP Fastboot screen shows 30.BC which is the bootloader version for the leaked test/soak 5.02...
You attempted to downgrade, and the phone doesn't like it.
Please see -> http://forum.xda-developers.com/mot..., and the impacts of GPT.BIN and MOTOBOOT.IMG
At this point, if your phone is saying Invalid CID and stops when it tries to boot, you are likely stuck until a 5.1 SBF for your phone/carrier leaks, and you can mfastboot fash it. It is the only SAFE way.
There might be other ways (look in the threads discussing the leaked 5.02), but I wont suggest them as they wont take you back to 100% stock, and also introduce version mismatches on your phone which could cause problems/issues.
You need flash moto boot and bootloader from 5.0.2 ota files and later can flash stock 4.4.4 me too brick my phone ..... And solved
flashed boot and bootloader from 5.0.2 and worked well, thanks makysssdroid
eldar4uk said:
flashed boot and bootloader from 5.0.2 and worked well, thanks makysssdroid
Click to expand...
Click to collapse
Just do NOT take any future OTA's if you're now running a gpt.bin and motoboot.img from a different rom than you are now running on your phone. If history is any indication, you are very likely to brick in this situation.
makysssdroid said:
You need flash moto boot and bootloader from 5.0.2 ota files and later can flash stock 4.4.4 me too brick my phone ..... And solved
Click to expand...
Click to collapse
Bro,
Can you help me?
My phone is XT1056, and i am having the same error as you were,
Can you suggest me what to do?
I was on android 4.4.4, and by mistake i installed the Security Update,
after that my phone was i this state.
KidJoe said:
@WillisD is 100% correct...
Notice the message in the first shot?
Code:
downgraded security version
update gpt_main version failed
preflash vaildation failed for GPT
And the shot showing the top of the AP Fastboot screen shows 30.BC which is the bootloader version for the leaked test/soak 5.02...
You attempted to downgrade, and the phone doesn't like it.
Please see -> http://forum.xda-developers.com/mot..., and the impacts of GPT.BIN and MOTOBOOT.IMG
At this point, if your phone is saying Invalid CID and stops when it tries to boot, you are likely stuck until a 5.1 SBF for your phone/carrier leaks, and you can mfastboot fash it. It is the only SAFE way.
There might be other ways (look in the threads discussing the leaked 5.02), but I wont suggest them as they wont take you back to 100% stock, and also introduce version mismatches on your phone which could cause problems/issues.
Click to expand...
Click to collapse
Hi, please, where can i get the latest gpt.bin and boot for a generic xt1058? cause mine is bricked and gpt.bin from every firmware (i tried LATAM, BR, and AR 21.12-15 and the one that last with .7 and it seems like the gpt.bin in those firms its not the last, i had no problem cause i skipped that part everytime, but atm my phone is bricked and i need to reflash bootloader and i cant cause older gpt.bin in the firmwares :S
Hello,
Please help me get any OS back to my XT1053 for now. Here's what happened:
1) I unlocked the bootloader, rooted my XT1053, stock recovery. Then last week I tried updating it to 5.1 official version via OTA. It failed due to files mismatch (maybe due to using apps that need root like Adaway). So I downloaded 4.4.4 STOCK version from Moto website, flashed boot.img, system.img and followed all the steps given here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Once the phone booted properly into 4.4.4, I tried 5.1 OTA and it worked fine. Then I flashed TWRP and SU to get root (I lost root when I flashed STOCK 4.4.4).
2) Everything was fine except that whenever I rebooted, my phone would Optimize ALL the apps. I Googled a lot and apparently this happened to many folks and there was no solution.
3) Today, I thought I will try and fix it by sideloading the 5.1 OTA zip (I thought the regular OTA style installation that I did of 5.1 over mfastboot style installation of 4.4.4 had something to do with it. I know, this was stupid of me!)
4) So, today I went to TWRP and tried to flash 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I am 100% certain that this was the file that I copied from /cache after OTA had downloaded the file last week and I had saved it locally on PC and in SD on phone. However, this flashing gave me an error saying that it expected either 4.4.4 KXA or 5.1 but that my system was 4.4?? So the flashing failed and my OS is gone. How can I get ANY OS back? Here are the things that I tried so far:
1) Installed RSD Lite and I am downloading XT1053_TMO_RETAIL-US_4.4.4_KXA21.12-L1.29.1_2_cid9_CFC_1FF.xml.zip file from http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1 as I type this out now. HOWEVER, I think I shouldn't use it as I read KidJoe saying not to downgrade. (KidJoe's comments are here http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347)
2) THEREFORE, I was wondering if I could simply flash a higher or equivalent version of ROM. Since we don't have an official 5.1 flashable zip right now, can I use 5.1.1 by CM? It's present here: http://primehowto.com/install-andro...le-moto-x-xt1053-2013-via-cm12-1-nightly-rom/
3) If yes to point# 2 above, I have a small problem. My phone is not detected by 'adb devices; in TWRP recovery mode. My battery is 11%. Could that be the issue?
I KNOW THIS WAS A LONG POST. I JUST WANTED TO GIVE ALL THE INFO. PLEASE HELP ME GET ANY OS ONTO THE PHONE AND THEN I WILL WAIT FOR THE 5.1 SBF TO BE AVAILABLE. THANKS A LOT IN ADVANCE....
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
hbenz2008 said:
here [Official] XT1058_GHOST_RETBR_5.1 FXZ/SBF (Full Rom)uploaded by our fellow user GARUXA
https://doc-10-ak-docs.googleuserco...359/*/0BwcadIv25aK8Tng3SUk2b1k5aVE?e=download
http://forum.xda-developers.com/mot...t1058ghostretbr5-1-fxz-sbf-rom-t3144161/page2
Click to expand...
Click to collapse
Thanks for quick response. But I have XT1053.. Can I still use the one that you gave?
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
hbenz2008 said:
Not recommended, hold on a bit. Did try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
No, I didn't try mfastboot of 'gpt' from 5.1 update file 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip'. I don't see an 'mboot' or 'boot' file in it though. I do see 'gpt'. Also, in fastboot mode it says "Charger connected" instead of "USB connected". I think that's due to the low battery too?
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
Would you know if 'Blur_Version.213.44.1.ghost_row.Retail.en.US.zip' file is the OTA 5.1 file? I think that's how the naming convention goes i.e. the name is set to the system version on which it is going to be updated NOT the system version that it will be updated to. I don't know why this flash failed though. I can give you the exact error that I get when I try flashing this if that helps? Thanks!
Shoot the error. If it's security downgrade, again flash gpt and mboot from Ota 5.1.
I will have to verify the name of Ota as its critical info.
hbenz2008 said:
Not recommended, hold on a bit. try to flash only gpt and mboot from your 5.1 update?
Click to expand...
Click to collapse
When I tried flashing "Blur_Version.213.44.1.ghost_row.Retail.en.US.zip" file (which I still think is the OTA 5.1 zip), I get this error:
Package expects build fingerprint of mototola/ghost_retail/ghost:4.4.4/KXA21.12-L1.29.1/2:user/release-keys or motorola/ghost_retail/ghost:5.1/LPA23.12-15/15:user/release-keys; this device has motorola/ghost_retail/ghost:4.4/13.11.1Q2.X-69-3/51:user/release-keys
This is where I got burned today. The above error wiped out my OS. I was on 5.1, I don't know why it says I have 4.4....
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
hbenz2008 said:
Prolly system mismatch, try only gpt and mboot. What error do u get?
---------- Post added at 09:27 PM ---------- Previous post was at 09:17 PM ----------
BTW your post provided good info. So Ota think u on 4.4.
You flashed only syst and boot to get on 4.4 ,could be where the prob is.
Need to know where img/rom info reside.
Double check the 4.4 files you flashed.
Just thinking out loud..
Click to expand...
Click to collapse
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Hitdroid said:
What's 'mboot'. There's no such file in the extracted folder of 'blur.....' file that I mentioned earlier. there is 'gpt'. My phone is detected via fastboot now so I can flash but don't know where the 'mboot' is
Click to expand...
Click to collapse
Okay, so I fixed it. At least got an OS for now .. This is what I did.. I took a chance and went ahead with these steps:
1) Extracted files from Stock TMO 4.4.4 file 'TMO_RETAIL_XT1053_4.4.4_213.44.1.ghost_row.Retail.en.US_MR4_CFC.tgz' got from Moto website.
2) Modified 'flash.bat' file to have below commands:
SET mfastboot=mfastboot.exe
%mfastboot% getvar max-download-size
%mfastboot% oem fb_mode_set
%mfastboot% flash partition gpt.bin
%mfastboot% flash motoboot motoboot.img
%mfastboot% reboot-bootloader
%mfastboot% flash logo logo.bin
%mfastboot% flash boot boot.img
%mfastboot% flash recovery recovery.img
%mfastboot% flash system system.img
%mfastboot% flash modem NON-HLOS.bin
%mfastboot% erase modemst1
%mfastboot% erase modemst2
%mfastboot% flash fsg fsg.mbn
%mfastboot% erase cache
%mfastboot% reboot
3) It failed with 'partition', 'motoboot', 'logo'. Everything else was successful.
4) My phone booted into 4.4.4 now.
It's funny but I think I have successfully downgraded from 5.1 to 4.4.4... That means, my main system file was never upgraded to 5.1?? It's late and I want a phone for tomorrow so I won't try 5.1 tonight. But it would be great if experts could pitch in. How did I downgrade from 5.1 to 4.4.4?
Anyway, thanks for your help. Your comment about 'gpt' made me think "maybe my phone won't hard brick if I install 4.4.4 again".. and it didn't!
CHEERS!
You can downgrade Fri 5.1 to 4.4 without flashing gpt and mboot. Wait for full 5.1.
Excellent man. Check your bootloader version, it's probably lollipop. So don't take update yet.
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
to check bootloader BL, restart phone in fastboot read menu.
KidJoe got this better covered here
http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid said:
I thought we couldn't downgrade without bricking? Anyway, I am getting notification to update to 5.1 via OTA. I'm ignoring until I understand what's happening. So, pls tell me what are the things that I need to check the versions of? Attached is a screenshot from 'About Phone'. How do I check bootloader version? Thanks man..
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Many try to skip GPT.BIN and MOTOBOOT.IMG... but when you have a version missmatch (gpt/motoboot from one rom, and rest from another), you increase your chance of bricking should you apply an OTA update zip in the future. And you'll likely end up with features not working or extra "bugs" that wouldn't otherwise appear.
For those who say "its safe to downgrade"... I'll point you to -> http://forum.xda-developers.com/moto-x/general/info-warning-risks-downgrading-impacts-t3058202 and ask you to view the 7 links near the end of the first post as just a few examples.
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Hitdroid, do you mind sharing your 5.1 OTA file for xt1053.
I'm in the same situation as you. Got 5.1 OTA a few weeks ago, rooted it and installed TWRP. Then I accidentally installed my 4.4.4 backup which erased my 5.1 install.
I just installed CM 5.1 as a stopgap but i'd like to return to near stock so i'm following this thread.
as I thought, you have a 5.1 BL.
Gotta flash manually when sbf/ROM is available
Hitdroid said:
Hey KidJoe, I could really use your help. I didn't want to downgrade but I had no choice as I couldn't re-install 5.1 (hence created this thread). It's good that I didn't brick when I reverted to 4.4.4 from 5.1 but I am skeptical of taking the 5.1 OTA now.
Pls look at the screen shot that I attached in my previous post. Also, my BL version is 30.BE (sha-34b7ccb, 2015-04-22 12:57:17). I have Stock Recovery KXA21.12-L1.29.1
How can I get a perfect installation of 5.1.. By perfect I mean none of the files left behind in the old version.
Appreciate your help!
Sent from my XT1053 using XDA Free mobile app
Click to expand...
Click to collapse
Because of your bootloader, the safest way is wait for the 5.1 SBF to be posted (since you have an XT1053, it will be posted on Moto's web site, and you don't have to rely on leaks)... But I have no idea how long that will take.
Now, you could try to take the OTA, but I've seen enough bricks to say.. If it was my phone... I'd wait.
I'm at work so will share the file once I go home. But I think we should wait for 5.1 SBF as @KidJoe and @hbenz2008 have stated.
Sent from my XT1053 using XDA Free mobile app
So, as the title says, I had a Moto X XT1058 from AT&T.
I updated a long time ago to Lollipop and the phone worked perfectly fine until yesterday, when suddenly shutted down and when I restarted, got stuck on M logo.
I restarted to bootloader(?) pressing power off and vol down buttons.
The version that shows me is 30.BE
The device wasn't unlocked or rooted, because I was happy with the stock ROM, so it says Device is LOCKED ans Status Code 0.
I tried every option on this menu and everyone says (in red):
"No valid PIV block in SP for system
piv validation failed (system)
Boot up failed"
I tryed with abd, fastboot, mfastboot and RSDLite to flash gpt.bin and motoboot.img and every time I do it I get a error, and the operation fails.
For what I've read in tooooooo many posts, it's probably death, but I resist to this idea, so I came here to ask for advice.
THE PHONE IS NOT IN WARRANTY ANY MORE.
Thanks in advance and sorry for my english (not my native language).
why dont you try twrp recovery ?
just flash it
fadyrox said:
why dont you try twrp recovery ?
just flash it
Click to expand...
Click to collapse
Can I do it if my phone isn't rooted? The bootloader it's locked!
Flash full stock att 5.1 rom, it will be fine.
Salik Iqbal said:
Flash full stock att 5.1 rom, it will be fine.
Click to expand...
Click to collapse
Flashing via fastboot mode will be okay !
do search here you will get details !
fadyrox said:
Flashing via fastboot mode will be okay !
do search here you will get details !
Click to expand...
Click to collapse
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058
MatiCepe said:
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058
Click to expand...
Click to collapse
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !
fadyrox said:
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !
Click to expand...
Click to collapse
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.
MatiCepe said:
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.
Click to expand...
Click to collapse
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.
Salik Iqbal said:
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.
Click to expand...
Click to collapse
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.
MatiCepe said:
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.
Click to expand...
Click to collapse
Is your phone is charge enough? Search 5.1.1 att xml zip
can anybody give a solution for this problem because i am also with a xt1058 at&t, The device wasn't unlocked or rooted and the version that shows me is 30.BE too
sorry my english
What's up with your device any screen shot?
Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!
Thank you
H3c4rtr1 said:
Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!
Click to expand...
Click to collapse
You can help how you got the code, give details.
Thank you