Hi,
I tested this app with Optimus One and with Optimus Dual.
It works on both, but with Optimus Dual the long press of bluetooth button don't open the app. So it works only if you open the app manually from phone.
Is there a solution?
(I have LG v10a firmware)
Same problem, no solution. Cyberon support suggest to update handsfree or phone firmware. Voice commander 3.1 works well on Desire S, but on Dual works only via ptt button on wired headset. Issue seem to be related to LG Bluetooth stack, not to 2.2.x + Android version
Sent from my HTC Desire S using Tapatalk
are there some good news?
bluettoth works better with one of the last ROM or have the same problem with LG bluetooth stack ?
Hello xda,
I recently bought O2X and i tried to connect my bh-503 to it.
The device doesn't pop up in the bluetooth menu on my stock O2x.
Any thought ?
The BH503 is running over bluetooth 2.0 EDR +A2DP.
Thanks in advance
Sent from my LG-P990 using XDA App
Isn't the o2x able to handle bluetooth 2.0 and EDR ?
Sent from my LG-P990 using XDA App
same headset, but works fine here.
i've used it on stock rom and almost every version of mcr so far without problems.
Do you press the "on/off" button until the blue led light blinks? I have a BH-501 and a B-505... No problem... Sometimes the most simple thing it's... complicated... LOL
Wow,
that was the trick....
I totally forgot the long press thingy!
thanks !
Sent from my LG-P990 using XDA App
Music control keys on bh-503 not working?
Hi,
music control keys on the bh-503 are not working with my p990,
but working when I tried with samsung galaxyS, n nokia s60v3.
Are you guys facing the same issue with p990 + bh-503?
pratt10 said:
Hi,
music control keys on the bh-503 are not working with my p990,
but working when I tried with samsung galaxyS, n nokia s60v3.
Are you guys facing the same issue with p990 + bh-503?
Click to expand...
Click to collapse
Hello,
I do have a similar problem with Nokia BH-105. Once I updated to the last CM ROM (10.1), I could not make call any more.
With the BH-503, I'm facing similar problems.
LG Optimus 4X HD and Android 4.3 should support a BLE aka Bluetooth Smart. However I was unable to pair my bluetooth 4 heart rate monitor and use it.
So I looked into it and found that there was not "android.hardware.bluetooth_le.xml" file which I believe is necessary for BLE connections. I also found it in one of the LG Optimus G's custom roms. I put the file to system\etc\permissions file, extracted and installed the zip. Still I was unable to pair the device. I have tried latest CM, PA and Vanir roms.
Have you been able to get BLE working with your devices? Is there something developers might be able to do?
Thundermand said:
LG Optimus 4X HD and Android 4.3 should support a BLE aka Bluetooth Smart. However I was unable to pair my bluetooth 4 heart rate monitor and use it.
So I looked into it and found that there was not "android.hardware.bluetooth_le.xml" file which I believe is necessary for BLE connections. I also found it in one of the LG Optimus G's custom roms. I put the file to system\etc\permissions file, extracted and installed the zip. Still I was unable to pair the device. I have tried latest CM, PA and Vanir roms.
Have you been able to get BLE working with your devices? Is there something developers might be able to do?
Click to expand...
Click to collapse
have you tried it on stock rom?
Flying_Bear said:
have you tried it on stock rom?
Click to expand...
Click to collapse
No I haven't because to my knowledge Android 4.3 is needed because of its Bluetooth API.
E: I finally got it working. All that was needed was the bluetooth_le.xml and BLE Heart Rate Monitor -app from Google Play. It' still doesn't pair in in the Anroid's settings though. I am not sure yet if it works with other apps.
I would recommend developers to add bluetooth_le.xml to their roms
.
I am also having this problem. I have only tried cyanogenmod 11 though but I cannot get my ble heartrate monitor working.
Is there an optimus 4x rom that supports ble, or any plan on implementing in cyanogenmod or other roms?
All roms based on P880-dev sources have BLE support.
Is the CM11 based on P880-dev? It would seem it isn't because it wasn't possible to use the BLE with it. Instead I had to manually place the .xml file. It is quite impractical to do this every time instead of using OTA updates just because of a lack of one small file.
I have been using lately Vanir and unofficial CM11 and as many other roms they do support the BLE so I don't understand why the official CM11 couldn't as well.
Thundermand:
were you able to pair your bluetooth device in any of the roms?
I am able to use my heartrate monitor but only in some downloaded apps (BLE Heart Rate Monitor, IpSensorMan). When I am trying to pair it in the bluetooth setting it does nothing.
I have a noname monitor I hope that it is not the problem.
TJHookr said:
Thundermand:
were you able to pair your bluetooth device in any of the roms?
I am able to use my heartrate monitor but only in some downloaded apps (BLE Heart Rate Monitor, IpSensorMan). When I am trying to pair it in the bluetooth setting it does nothing.
I have a noname monitor I hope that it is not the problem.
Click to expand...
Click to collapse
No, the pairing in Android settings doesn't work (it didn't work on 4.3 too). I might have the same cheap noname HRM from eBay as you do. But all the programs which support Bluetooth Smart have built-in pairing so I suppose that the problem is more Android than HRM related.
You should try Polar Beat and Ride with GPS too. They are fine apps but there are some problems with RWGPS and my HRM.
Thundermand said:
No, the pairing in Android settings doesn't work (it didn't work on 4.3 too). I might have the same cheap noname HRM from eBay as you do. But all the programs which support Bluetooth Smart have built-in pairing so I suppose that the problem is more Android than HRM related.
You should try Polar Beat and Ride with GPS too. They are fine apps but there are some problems with RWGPS and my HRM.
Click to expand...
Click to collapse
Yes we probably have the same monitor.
Pairing would be important for me as I have been using endomondo pro for some time, and it has no built in pairing. But I'll try the ones you suggested, thanks.
Thundermand said:
No I haven't because to my knowledge Android 4.3 is needed because of its Bluetooth API.
E: I finally got it working. All that was needed was the bluetooth_le.xml and BLE Heart Rate Monitor -app from Google Play. It' still doesn't pair in in the Anroid's settings though. I am not sure yet if it works with other apps.
I would recommend developers to add bluetooth_le.xml to their roms
.
Click to expand...
Click to collapse
I got it working, too, using android.hardware.bluetooth_le.xml and it worked fine for a while but after an update of Cyanogenmod (cm-11-20140503-NIGHTLY) it stopped working. I looked and the file was gone. But even after putting it back in /etc/permissions/, it doesn't work anymore.
Any ideas?
giza1928 said:
I got it working, too, using android.hardware.bluetooth_le.xml and it worked fine for a while but after an update of Cyanogenmod (cm-11-20140503-NIGHTLY) it stopped working. I looked and the file was gone. But even after putting it back in /etc/permissions/, it doesn't work anymore.
Any ideas?
Click to expand...
Click to collapse
It has been disabled (commit).
Adam77Root said:
It has been disabled.
Click to expand...
Click to collapse
I use the unofficial cyanogenmod. I thought it was p880-dev based, at least partly (I remember there was a time when ble worked on unofficial when it was not working on official). Was it necessary to disable it also on unofficial? Did it cause that big of problem. Unfortunately this is a feature that I can not do without.
TJHookr said:
I use the unofficial cyanogenmod. I thought it was p880-dev based, at least partly (I remember there was a time when ble worked on unofficial when it was not working on official). Was it necessary to disable it also on unofficial? Did it cause that big of problem. Unfortunately this is a feature that I can not do without.
Click to expand...
Click to collapse
@Demetris included the disabling commit, because it got merged into official device tree.
I"ll revert it. Think is why Ricardo disable it in first place. I thought there was a bug or something
Sent from my Barnes & Noble Nook Tablet using Tapatalk
Demetris said:
I"ll revert it. Think is why Ricardo disable it in first place. I thought there was a bug or something
Sent from my Barnes & Noble Nook Tablet using Tapatalk
Click to expand...
Click to collapse
Hmm, I saw this: Add support for BLE and installed cm-11-20140605-NIGHTLY but BLE still doesn't work. Has the change not yet been merged? I'm relatively new to git and github, so I'm not sure if I understand how and when a change should show up in the NIGHTLY builds.
giza1928 said:
Hmm, I saw this: Add support for BLE and installed cm-11-20140605-NIGHTLY but BLE still doesn't work. Has the change not yet been merged? I'm relatively new to git and github, so I'm not sure if I understand how and when a change should show up in the NIGHTLY builds.
Click to expand...
Click to collapse
That's not the official repo.
Any news on this? Is BLE integrated in CM11, or are there any plans to do so? If not, can anyone please recommend a ROM that has BLE confirmed as working?
Thanks
ursinne said:
Any news on this? Is BLE integrated in CM11, or are there any plans to do so? If not, can anyone please recommend a ROM that has BLE confirmed as working?
Thanks
Click to expand...
Click to collapse
I 'm waiting for up
Same question but now for 5.0 roms.
Are there any information on this? I consider buying a BLE device and would like to know whether it would work.
Hi everyone,
there is a big confusion around bluetooth compatibility topic, and I would like to solve my problem.
Lots of people in the world are not able to understand when a bluetooth device is compatible with LGP880 or not.
I need a phisical bluetooth mouse and keyboard to use in mhl mode, I already buy a Trust Zanoo BT 2.0 mouse but it partially work, in fact works only inside BLUE DROID APP, outside this app there is no way to see a pointer, crazy!!!!
I'm not sure the problem is only 2.0 or 3.0 BT version.
For keyboards there is no problem, a lot of well working KB are available on the market
Which parameters should we look on a BT device to be sure that a this device will work on our phone sistem?
My 4XHD have JB 4.0.3 original OS.
Many thanks to everyone will contribute tothis topic.
Guys I have a problem with our beloved xperia and I'm posting only now because I am sure now it's actually the phone, not the device (I tried it on an old KitKat Samsung and a nougat moto g... Everything is fine there).
So I have an iPega 9025 bluetooth gamepad which was working all right in my previous Nexus 5.
Here's the problem: FIRST TIME I try to pair the pad everything is fine, gamepad is working as it should be in games, emulators and within the android system. After first use though, if I turn off the gamepad and turn it on again it just doesn't work. I can see the Bluetooth icon in bar system and I see it in Bluetooth settings as Connected, it just does doesn't work.
Before u ask, I already tried going in Scanning settings and play with WiFi Scanning and Bluetooth scanning (on or off) : it doesn't change anything
I also tried in Developer Options in change Bluetooth AVRCP version from 1.6 to 1,4: doesn't change anything.
Bummer, I was planning on heavyly using emulators and games...
Does somebody has my same problem? Or maybe it's just this particular ipega gamepad having some sort of conflict with our xperia? In that case, does somebody is using some other Bluetooth Gamepad and NOT having any problems?
P. S. I'm on last build 47.1.A. 2.374
Nobody...?