Database Develop

brick ?

after installing a custom rom phone rebooted and stucked on htc logo. i tried to recovery bot i get only the ! screen, formatting the sd card and copy DREAIMG-RC29 didn't help. in cmd when i try to fastboot update update.zip it says : error: failed to load ....
please, any help?!?!!?

DREAIMG is for the dream not the legend.Are you in the right forum?
Questions go in Q&A NOT development!
If you cant even get the right file for your phone dont try to flash custom roms,Fastboot will not work like that.You need a custom recovery but as i said...Dont try it man you obviously have no clue (not being horrible but i can see you will be posting soon saying the phone wont turn on)
You also have to wipe all when flashing a new rom 99% of the time

so sorry, but im a litle bit panicked. i dont want to brick the phone ;/ could you help me then ? id be very thankful. i wiped before install new rom (via clockwork) and it installed but when i rebooted it stucked on htc's logo and frozen
edit.
ok sorry for OT, i panicked ;/ for the future :
1. legeimg.zip push to root sd
2. recovery (if broken -> vol up + pwr)
3. wait for recovery
4. clear cache/wipe
5.flash update.zip
6.done
please close the topic.

hold BACK+POWER ob if it goes to fastboot, navigate to bootloader then recovery using volume and power buttons.Either restore backup or download a new rom from the right section for your phone

LG screen shows up then black screen with blinking buttons

Hello guys!
I'm having some problem with my OB. This happened after one reboot while using TeslaLED's torch. My phone rebooted then the LG logo showed up. Then to my surprise, the nova8's boot animation didn't showed up. At first I thought it got bricked, but I waited for it to finish boot up. Then when I touched the screen, I felt a haptic feedback, meaning the phone ain't bricked.
Then I tried pulling battery and rebooting again. Same black screen with flashing buttons. Then after 5 tries of pulling battery and rebooting, it continued to boot to bootanimation and screen didn't turn black. But everything was wiped out. So, downloaded all my apps again.
And everytime I reboot my phone I get this black screen.
After a month of pulling and rebooting, I decided to go back to stock, to see if it was a problem with Nova8 ROM. And I hoped the issue will be gone after flashing back to stock.
But now, I'm on stock ROM. LG logo shows up, then black screen, then I waited and heard LG's stock bootanimation. Meaning it ain't bricked.
Can you help me? Is there a way for me to fix this? Any form of help will be much appreciated. Could it be hardware problem?

hi, I have the same problem that you've tried everything and I can not make my optimus black out the screen of lg. I've watched several people with the same problem.

Well, I can't say that it's good that you have the same problem. But now I'm sure that it has to be some problem with Nova8. And that it did something terrible with our phones.
I've tried flashing Cm7 rom and this problem doesn't occur. It could be a problem with Froyo Roms?
We need help (

factory reset !

how to factory reset the phone's screen is just lg?

http://forum.xda-developers.com/showthread.php?t=1275315

If you havent tried this yet, try this here: http://forum.xda-developers.com/showthread.php?t=1396091
should always work. If not, either your phone is bricked and needs to be returned, or your PC doesnt work properly, or you missed anything in the thread, so follow it CAREFULLY, or you simply need more knowledge about your phone... so keep on reading
OR try this one, since it really is a step by step guide

http://forum.xda-developers.com/showthread.php?t=1396091 I do not understand, I'm Brazilian.

it is not bricked. I'm using my phone as I speak. It's just that its very hard to boot normally if I reboot. Because There's an 90% chance of getting into black screen than to continue boot up to bootanimation

yes my Ob also did not able to restart it if it was on the screen of LG, but now he does not care anymore.

Did you have CWM installed before? If yes get SuperoneClick and a custom .zip rom (e.g. redy's). And put .zip Rom to ur sd card.
1. Extract Superoneclick to C:
2. rename the folder to SO
3. then open Command Prompt by typing cmd into search/run or push windows + r and type it there
4. when command prompt is open type "cd so" without " "
5. type "cd adb"
6. type "adb reboot recovery"
7. wipe data, cache, in advanced wipe dalvic
8. go back
9. choose install zip from sd card and install the zip you just downloaded and everything should be fine, but ALL your data will be lost!

should I do the command prompt while the phone is connected?

Yes, otherwise, how should the phone get what the PC wants it to do? and also enable debugging mode if possible.

Solved it!
It seems that my phone has issues with Froyo based firmwares. When I flashed Zeus1 and CM7 my phone didn't showed the same problems I had.
What I did:
1.Used KDZ updater to flash V10A.(I came from Nova8)
2.When it's finally up and running, install Gingerbreak to attain root.
3.Download CWM recovery from ROM Manager.
4.Download any Gingerbread based ROM.(CM7,Redy's repackaged, Zeus1)
5.Put it in SD card.
6.Reboot to recovery
7.Wipe data/Factory Reset
8.Wipe cache partition
9.In Advance, wipe Dalvik Cache
10. Go back, Install zip from SD card.(Look for your ROM)
11.Wait for it to finish
12.Reboot.
13.Enjoy!!!
Why V10a? Because root can be attained using Gingerbreak. I tried Superoneclick , but got no luck.

[Q] S6500D Reset fail, Recovery fail all fail

Hey Guys,
i have problems with my S6500D. It always keep the background and other settings. If i connect it to my pc and copy something to my Flash memory, it lost all data after reboot.
The direcotry always keep whatsapp dir and some other.
I tried it to flash with Odin (With success message) but all Settings are still setted. Same Background, same Apps same everything.
I tried to flash Clockworkmod with Odin 1.85 but i tries to boot into the recovery and after a reboot it boots into hard reset menu.
Is it possible to erase everything and flash the complete hole fkng phone? It can be rooted, doesn't m8!!!
I live in germany and wrote all informations about the phone on a Document
CSC PDA Phone IMEI and SALES code.
HELP PLS !!

Push

htc one mini 2 ,,this build is for development purposes only"

Hello!
My htc stuck on logo ,,this build is for development purposes only". Twrp and bootloader working. I can instal cm and other rom but after instal htc stuck in logo Please help me. How install a custom rom.
h.t.t.p://i63.tinypic.com/2d0ctwj.jpg

rabus40 said:
Hello!
My htc stuck on logo ,,this build is for development purposes only". Twrp and bootloader working. I can instal cm and other rom but after instal htc stuck in logo Please help me. How install a custom rom.
h.t.t.p://i63.tinypic.com/2d0ctwj.jpg
Click to expand...
Click to collapse
pic not working
Try:
clear cache and dalvik
remove USB cable before reboot.

You must delete . in h.t.t.p. I can't upload photo because I'm a new user. I try clear cache and dalvik and still not working

rabus40 said:
You must delete . in h.t.t.p. I can't upload photo because I'm a new user. I try clear cache and dalvik and still not working
Click to expand...
Click to collapse
yes but it wasnt loading.
OK so you installed HTC stock ROM but gets stuck?
is it the appropriate Rom for your phone or it might be corrupted. Reinstall and make sure its the right one.
Original ROM

Please tell me how to install ,, htc orginal backup" ?

rabus40 said:
Please tell me how to install ,, htc orginal backup" ?
Click to expand...
Click to collapse
download Stock ROM from link above
Make TWRP backup in your phone (not sdcard)
Replace Phone backup you just made with the one you download
In TWRP restore backup
Remove USB cable and Reboot
Flash Stock Recovery from link above
Reboot
Perform HTC OTA update
Reboot
Flash TWRP
Flash SuperUser if Root require
Reboot
Thank me...
Donate me...
Done

rabus40 said:
Hello!
My htc stuck on logo ,,this build is for development purposes only". Twrp and bootloader working. I can instal cm and other rom but after instal htc stuck in logo Please help me. How install a custom rom.
h.t.t.p://i63.tinypic.com/2d0ctwj.jpg
Click to expand...
Click to collapse
When i was stuck in that screen the only way i found to get out of it was to remove the back cover and disconnect the battery

I have the same problem
-I have rooted my htc mini2 and after a while decided to restore the original ROM but everytime i turn on the phone i have that red warning message.
One day i decided to delete de TWRP backup files bacause it takes a lot of space on my internal memory .
Yesterday my baterry died so when i was turning my phone it gets stuck on that message screen . So i can't get through because on my internal memory i don't have the TWRP files to backup or get into recovery mode.
Is there any solution? i was thinking about putting those files on my sd card and see if the phone will read them?

Tiburcio U123 said:
I have the same problem
-I have rooted my htc mini2 and after a while decided to restore the original ROM but everytime i turn on the phone i have that red warning message.
One day i decided to delete de TWRP backup files bacause it takes a lot of space on my internal memory .
Yesterday my baterry died so when i was turning my phone it gets stuck on that message screen . So i can't get through because on my internal memory i don't have the TWRP files to backup or get into recovery mode.
Is there any solution? i was thinking about putting those files on my sd card and see if the phone will read them?
Click to expand...
Click to collapse
Download Nandroid files for your phone and place it in SD Card via computer and then restore it via TWRP..

TryllZ said:
Download Nandroid files for your phone and place it in SD Card via computer and then restore it via TWRP..
Click to expand...
Click to collapse
Ok but how am i going to install TWRP on my phone? i've deleted . Is there a way of doing all this process completely on SD card?

Tiburcio U123 said:
Ok but how am i going to install TWRP on my phone? i've deleted . Is there a way of doing all this process completely on SD card?
Click to expand...
Click to collapse
No, not possible from SDCard alone, you have to flash TWRP by placing TWRP in PC ADB folder (ADB must be installed in PC and device should be able to enter bootloader and fastboot) and entering bootloader>fastboot on device, then connect device to PC, this only works on unlocked devices.
Command is :
fastboot flash recovery twrp.img
fastboot erase cache

Tiburcio U123 said:
I have the same problem
-I have rooted my htc mini2 and after a while decided to restore the original ROM but everytime i turn on the phone i have that red warning message.
One day i decided to delete de TWRP backup files bacause it takes a lot of space on my internal memory .
Yesterday my baterry died so when i was turning my phone it gets stuck on that message screen . So i can't get through because on my internal memory i don't have the TWRP files to backup or get into recovery mode.
Is there any solution? i was thinking about putting those files on my sd card and see if the phone will read them?
Click to expand...
Click to collapse
Hey, i had the same issue. After rooting my phone, when my phone died because of the low battery, the same thing happened to me.
The solution is pretty simple, actually - you have to restart the charging unit of your phone.
So what you gotta do is this:
leave it to charge a couple of minutes (so it will have enough power to boot again) and then just press all the buttons of your phone at the same time and hold it for up to 10 seconds, so power button + volume up + volume down.
This will restart your charging unit and it will get your phone to boot normally again. :fingers-crossed:
I don't know why this keeps happening, but I have to do it all the time, if my phone dies. So I try to make sure it has enough battary not to die, because it is just annoying.

i have the same problem. if you hold the power button + volume up you can reboot your phone if it is frozen.

petie2106 said:
i have the same problem. if you hold the power button + volume up you can reboot your phone if it is frozen.
Click to expand...
Click to collapse
the trick is to keep hold of power vol up & vol down for 2 mins,it will boot,reboot,boot,reboot loads of times,keep hold for at least 2 mins,once you let go it resets itself:good:

make sure you have a some means of installing Android back onto your phone placed on your SD card or internal storage
I recommend updating to the latest version of twrp before trying these (I used 3.0.2.0)
twrp>wipe>advanced wipe>select everything but: "/Micro SDCard" "/Internal Storage" "SD-EXT" and "USB-OTG
after that install Android by restoring from a recovery backup or instal a custom rom onto your device (whatever floats your boat)

Help, Soft-brick my Lenovo K3 Note K50-t5

Hi all, first of all, i'm not full expert on android, but I know some stuff. anyway i tried to root my phone using kingroot (last version update) i don't know what i did wrong, but know the phone stuck on the Lenovo logo, then bootlops again and again.
I read there I have to flash a new rom to my phone, but again im not experts in android. so im not sure how to do it. There is any guide? or one click tool to help me flash rom to my phone from the computer?

Hi there, I also had the same issue a while ago. I soft bricked my phone, it got stuck into bootloop and I got so confused what to do because I didn't wanted to lose my phone over some parlor trick. What I'm gonna do here is explain you all the things step by step and if you follow them correctly, you will see your k3 working at the end. So first thing first don't ever use kingoroot again to root your phone or any other phone. Not Helpful.
So I'm assuming that you are stuck at boot logo or somewhere around it, facing black screen. Don't worry it'll be alright at the end of the day. You need to download a few things before we start because to completely vanish the problem we have to unroot the device and install stock rom again using spftools.
Requirements Download files and tools :
1)Download flash_tool
2)Download USB Driver of Lenovo K3 Note
Link- https://drive.google.com/folderview?...kU&usp=sharing
3)Download K50a40_S112_150610_ROW.rar
Link- https://docs.google.com/uc?id=0B1tnng1Ipox5S1NsVG53YndVNVU&export=download
After downloading all the necessary files keep your PC ready for the following things:
1)Install "LenovoUsbDriver_v1.1.13.exe", then Restart pc.
2)Extract "SP_Flash_Tool_exe_Windows_v5.1452.00.000.zip" using Winrar
3)Open SP Flash Tool with Adminstrative rights (Right click on flash_tool.exe from inside the SP Flash Tool folder)
4)Go to Options > Option... > Download > Tick "DA DL All with Checksum" > Close the options box
5)Close SP Flash Tool.
Charge your phone up to 80% or more- is a must for the following process to avoid any issues.
Flash Recovery
1)Download and Extract "TWRP_v3.0.0-3_for_SP_Flash_Tool.zip" *
2)Open SP Flash Tool(admin rights), and From "Download" Tab click on "Scatter-Loading"
3)Browse the TWRP v3.0.0-3 folder and select the "MT6752_Android_scatter.txt" file > Ok **
4)Click on "Download" icon
5)Completely turn off your phone and wait for about 10 sec (BUT DO NOT REMOVE BATTERY) and NOW connect it to PC using usb cable.
6)Wait till the Process completes and a "Download ok" box will appear with a green tick. Disconnect the phone from cable. Done!
Now press and hold VolumeUp+VolumeDown+PowerButton all three buttons at one untill you see the "TWRP" logo.
The phone will boot into custom recovery you just installed.
Flash Stock Rom
1)Extract K50a40_S112_150610_ROW.rar to a folder and open flash tool extracted folder and run flash_tool.exe
2)On the flash tool, click Scatter-Loading button browse and then select file name MT6752_Android_scatter.txt, just find it on K50a40_S112_150610_ROW target_bin folder, then click open.
3)Now it will load the above file, make sure only recovery selected and select the Firmware Upgrade option.
4)In the menu Option tab, select Download and check DA DL All with Checksum.
5)Click Download button or hit F9
6)Completely turn off your phone and wait for about 10 sec (BUT DO NOT REMOVE BATTERY) and NOW connect it to PC using usb cable, this will start the flashing process on flash tool.
7)Wait till the Process completes (5-10mins) and a "Download ok" box will appear with a green tick. Disconnect the phone from cable. Done!
8)Then switch on your phone just wait, it will take some minutes for first boot and be patient.
You will see your device boot up like the first time you booted it up. Fresh as a new. It has a custom recovery installed so it advised to take a backup of the fresh system using TWRP incase you need it in future. Press and hold VolumeUp+VolumeDown+PowerButton to access recovery menu.
So now you have unbricked your phone and it's also in unroot condition. Follow the procedure and you'll be good.
Attention: I'm not responsible for any damage that occurs to your smartphone, for committing install Stock ROM on your smartphone is very risky, if you have a doubt it better don't do it or give to someone who is more understand with this installing. Thanks.

I would rather suggest you to directly install the latest stock ROM for our device I.e s433 instead of lollipop so you won't have to go through all the trouble of downloading and updating as the mm update is nearly a GB in size.
Here's the link to that
https://drive.google.com/file/d/0BzEmkxrdpsgRMFpxX0VPT3FMODg/view
After installing the rom, install twrp recovery as mentioned in the above post, boot to that recovery and then flash this SuperSU zip. When that is done just reboot and you will have a rooted stock rom

Here is the SuperSU zip

Hi, I have a slightly different problem would the fixes above help me too.
My issue started with installing lineage 14.1 using twrp 3.02, after a factory reset, due to selling to a friend, the phone now only boots to TWRP every time, so I'm kind of stuck in a twrp boot loop, I installed twrp 3.1 but that made no difference, still twrp loop.
So should I just follow the above method, not flash twrp, but just flash the latest official rom using the above method, to get the phone back to loading roms?

justwondering said:
Hi, I have a slightly different problem would the fixes above help me too.
My issue started with installing lineage 14.1 using twrp 3.02, after a factory reset, due to selling to a friend, the phone now only boots to TWRP every time, so I'm kind of stuck in a twrp boot loop, I installed twrp 3.1 but that made no difference, still twrp loop.
So should I just follow the above method, not flash twrp, but just flash the latest official rom using the above method, to get the phone back to loading roms?
Click to expand...
Click to collapse
Yes you will be able to fix your phone with those methods. What you would want to do is this:
1) While your phone is booted to recovery, run sp flash tool on your PC.
2) Remove the battery and insert it again to power off your phone if you can't do it through the recovery.
3) Load all the required files in sp flash tool as written in the posts above.
4) Select 'firmware upgrade' option (This will wipe off your internal storage) instead of 'download only' and click on download button.
5) Now connect your phone to PC and long press the power button of your phone. You will see the download process has begun in sp flash tool. Wait for it to complete and leave your phone there till it completes.

raghuM said:
Yes you will be able to fix your phone with those methods. What you would want to do is this:
1) While your phone is booted to recovery, run sp flash tool on your PC.
2) Remove the battery and insert it again to power off your phone if you can't do it through the recovery.
3) Load all the required files in sp flash tool as written in the posts above.
4) Select 'firmware upgrade' option (This will wipe off your internal storage) instead of 'download only' and click on download button.
5) Now connect your phone to PC and long press the power button of your phone. You will see the download process has begun in sp flash tool. Wait for it to complete and leave your phone there till it completes.
Click to expand...
Click to collapse
Brilliant Ty, just to confirm, when you say select "firmware upgrade option" I should at that point have the stock rom loaded into flash tools, so that will over write current installed recovery and rom.
Then I guess, try lineage again, great rom, only the twrp boot loop has been a big pain, I have read this is because of using twrp 3.02, twrp 3.03 and twrp 3.1 are said to fix this issue from happening next time.
Thank you

justwondering said:
Brilliant Ty, just to confirm, when you say select "firmware upgrade option" I should at that point have the stock rom loaded into flash tools, so that will over write current installed recovery and rom.
Click to expand...
Click to collapse
Yes that's right, else the download process won't start. Once you load the scatter file it will also set sp flash tool to overwrite your current twrp recovery with the stock lenovo recovery.

When-ever i Plug my phone into USB with battery it auto boots into TWRP no matter what i do and SP doesn't even recognize or start flash