Database Develop

JRO03R new firmware release

The new firmware released http://www.androidpolice.com/2012/0...4g-xoom-galaxy-nexus-gms-and-lte-and-nexus-7/
According to JBQ, the most noteworthy change here is that the new binaries for the Nexus 7 "support GPS, and include a high-precision touchscreen firmware."
Question: If I'm using cyanogen nightlies, how should I update to this version?
P.S I hope this fixed deadspots and x/y axis problems

jaroslavj said:
The new firmware released http://www.androidpolice.com/2012/0...4g-xoom-galaxy-nexus-gms-and-lte-and-nexus-7/
According to JBQ, the most noteworthy change here is that the new binaries for the Nexus 7 "support GPS, and include a high-precision touchscreen firmware."
Question: If I'm using cyanogen nightlies, how should I update to this version?
P.S I hope this fixed deadspots and x/y axis problems
Click to expand...
Click to collapse
Rasbeanjelly has it now lol idk how for cm

I hope this fixes the low speed jitters that occur when dragging items on the screen
Sent from my MB855 using Tapatalk 2

Weird, I had no issues whatsoever with touchscreen precision or gps. But since its a firmware issue I was hoping they would've fixed that vertical line across the screen thing...
Jog my memory here, it's been a while for me; ill lose root if I pull this OTA, right? Stock everything.

I just picked up a C90. My first tablet but not my first Nexus device. Funny enough I'm running JRO03S right out of the box...I would think this is newer yet then JRO03R.

So will this be in a future ota? These aren't for direct user consumption, rather components for ASOP.

khaytsus said:
So will this be in a future ota? These aren't for direct user consumption, rather components for ASOP.
Click to expand...
Click to collapse
Exactly, these are not OTA's.

dparrothead1 said:
Exactly, these are not OTA's.
Click to expand...
Click to collapse
Actually at some point they will be in an ota they are the binary bulbs tat make up some of the library files that aosp uses. But at this point if you want t use them you need to build aosp yourself to see the benefits.
Sent from my Nexus 7 using Tapatalk 2

skeeterslint said:
Actually at some point they will be in an ota they are the binary bulbs tat make up some of the library files that aosp uses. But at this point if you want t use them you need to build aosp yourself to see the benefits.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
[CWM] JRO03R Binary Drivers
The binaries come pre-built, just plug and play

Galloway said:
I just picked up a C90. My first tablet but not my first Nexus device. Funny enough I'm running JRO03S right out of the box...I would think this is newer yet then JRO03R.
Click to expand...
Click to collapse
Devices shipped to Japan this week (first batch touched down from Guangzhou yesterday morning and I got mine from fedex after work) have been JRO03S as well.

Does anybody happen to know when a ota update with the new binaries will be available?
Sent from my Black "Destroy Mode" N7

3vo kid said:
Does anybody happen to know when a ota update with the new binaries will be available?
Sent from my Black "Destroy Mode" N7
Click to expand...
Click to collapse
Only Google Knows
Nexus 7

JRO03R? I'm still on JRO03D and my N7 says there is no update.

mk92595 said:
JRO03R? I'm still on JRO03D and my N7 says there is no update.
Click to expand...
Click to collapse
JRO03R is available for AOSP. There is no OTA update for Nexus 7 yet, though many new ones ship with JRO03S and a dump is available here in the development section.

So i am getting this right as this is merely an update for the binaries and not a full update of the OS?
As i suffer from the usual Nexus 7 problems (Touchscreen Issue etc) i would like to install those binaries. Is this possible? I am on stock JRO03D 4.1.1 but rooted...
How could i manage (if it's possible) to install these binaries?

Bobuscho said:
So i am getting this right as this is merely an update for the binaries and not a full update of the OS?
As i suffer from the usual Nexus 7 problems (Touchscreen Issue etc) i would like to install those binaries. Is this possible? I am on stock JRO03D 4.1.1 but rooted...
How could i manage (if it's possible) to install these binaries?
Click to expand...
Click to collapse
I believe on the last page somebody posted a link to a zip you can flash in Recovery.

[ROM] TweakerRom 1.1.0

The first (very mildly) customized ROM for NVIDIA SHIELD... Tweaker.
For those who tried SHIELD on launch day (or early on before the OTA was applied), it had a dashboard with bigger graphics that were easier to read. Now, it's just icons. I don't like the icons. So a little bit of hacking together pieces (and adding SuperUser while I was at it) resulted in TweakerRom.
Don't expect much difference, at least not until I get CM-10.2 done for SHIELD. But this has a nicer interface, in my opinion, and is based on the latest OTA 1.1 release (with the SHIELD UI from the original image)
You need to install a SuperUser app (I highly recommend SuperSU) but you don't need to use recovery to do it.
Download:
http://goo.im/devs/agrabren/shield/tweaker/ShieldTweaker-1.1.zip

Reserved for changelog and stuff

Reserved for Video! It WILL come.

This is great! Will flash this tonight once I can get CWRM to flash properly in fastboot...

Awesome! I'm glad to see the first step being made, but I'm going to hold out until 10.2. I'm getting lazy in my old-ish age.:silly:

Sorry BUT:
I hate to be "that guy" but could you put up a mirror or can I? These are my speeds:
and... I am getting a 850kb per second download speed.
---------- Post added at 02:13 PM ---------- Previous post was at 01:41 PM ----------
I just finished Unlocking and Flashing your recovery when the download finished (YES I unlocked it just for this ROM). I have to say: I LOVE the interface, I never got to see it but it is SO much better! Thanks for pioneering the development over here, there isn't much at all... I plan to do some theming stuff once I get around to it XD

Kwongger said:
I hate to be "that guy" but could you put up a mirror or can I?
Click to expand...
Click to collapse
Go ahead and mirror.
Glad you like that interface.

agrabren said:
Go ahead and mirror.
Glad you like that interface.
Click to expand...
Click to collapse
I will mirror tomorrow at school when I have a decent upload speed (0.3mbs up at the house).

Mirror is UP!
I have uploaded the mirror to Android File Host! Here it is:
MIRROR

Hi, how things going with CM-10.2 for SHIELD? If you need extra device for tests just let me know.

New OTA update out today. Android 4.3. Will there be any issues if I update through this rom?

themichael said:
New OTA update out today. Android 4.3. Will there be any issues if I update through this rom?
Click to expand...
Click to collapse
On most devices you have to be stock in order to update.

nrage23 said:
On most devices you have to be stock in order to update.
Click to expand...
Click to collapse
Yes, but this ROM is bascically the stock ota wit one app changed. The updater apk is still intact.

themichael said:
Yes, but this ROM is bascically the stock ota wit one app changed. The updater apk is still intact.
Click to expand...
Click to collapse
If you do not have the stock recovery then you cannot install the factory update. If you installed this rom you don't have the stock recovery.
Sent from my SM-P600 using XDA Premium HD app

nrage23 said:
If you do not have the stock recovery then you cannot install the factory update. If you installed this rom you don't have the stock recovery.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Stock recovery is very easy to flash...you are not answering my question but rather proposing roadblocks.

themichael said:
Stock recovery is very easy to flash...you are not answering my question but rather proposing roadblocks.
Click to expand...
Click to collapse
All you asked was if you could get the update while having this rom. I did answer the question. Was not trying to be difficult. Next time I guess I will just say no and you figure can the rest out.
Sent from my SM-P600 using XDA Premium HD app

nrage23 said:
All you asked was if you could get the update while having this rom. I did answer the question. Was not trying to be difficult. Next time I guess I will just say no and you figure can the rest out.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Turns out you're wrong, you can. Thanks for nothing.

themichael said:
Turns out you're wrong, you can. Thanks for nothing.
Click to expand...
Click to collapse
The SHIELD is a bit of an unusual exception here - most of their OTAs seem to be full system images, instead of delta patches.
While this makes the OTAs much larger, it also makes them much more robust.

agrabren said:
The first (very mildly) customized ROM for NVIDIA SHIELD... Tweaker.
For those who tried SHIELD on launch day (or early on before the OTA was applied), it had a dashboard with bigger graphics that were easier to read. Now, it's just icons. I don't like the icons. So a little bit of hacking together pieces (and adding SuperUser while I was at it) resulted in TweakerRom.
Don't expect much difference, at least not until I get CM-10.2 done for SHIELD. But this has a nicer interface, in my opinion, and is based on the latest OTA 1.1 release (with the SHIELD UI from the original image)
You need to install a SuperUser app (I highly recommend SuperSU) but you don't need to use recovery to do it.
Download:
http://goo.im/devs/agrabren/shield/tweaker/ShieldTweaker-1.1.zip
Click to expand...
Click to collapse
Thank you flashed this and streaming is working perfectly again the image is sharp and no artifacts I don't need console mode

[VIDEO] How To Flash Android 4.4 To Your Nexus 4

Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?

Thanks dude just what I was looking for!
Sent from my Nexus 4 using Tapatalk

Does this break anything? I am really tempted to do it!
Sent from my Nexus 7 using xda app-developers app

TheSmokingAndroid said:
Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?
Click to expand...
Click to collapse
Thanks, just what I was looking for. If I cant find a toolkit to do it with then I have no doubt with your video I can get it done. I don't want to wait! Welll done.

TheSmokingAndroid said:
Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?
Click to expand...
Click to collapse
I am getting a status 7 error. Any idea how i can fix that?

Seems to break root. I can't get back to cwm.
Sent from my AOSP on Mako using XDA Premium 4 mobile app

justibasa said:
Seems to break root. I can't get back to cwm.
Sent from my AOSP on Mako using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have an easy root fix for once you update to 4.4 if you have Mac
I modified the Root.Nexus.4.zip file for Mac on here, updated it to CWM 6.0.4.3 image, and SuperSU 1.65 image. Just unzip, and run the Root.Nexus.4 terminal shell script with the N4 in fastboot with USB connected to the Mac, I think you can use a similar script for PC and prob need USB drivers if you don't have them already. Hope this helps
I'm unable to post a link on here since I'm a newb, PM if you want the link to the zip

Thanks
Another build available here : http://www.androidauthority.com/android-4-4-kitkat-nexus-4-nexus-7-download-unofficially-313352/.
Flashed this in CWM, everything, including root is absolutely fine. (I flashed SuperSu 1.65 zip). But for the proper google experience, have to wait for the factory images.
The lockscreen widgets functionality (except for the camera widget) seems to have been removed, can anyone find that option anywhere?
Edit: Lockscreen widgets can be enabled in Settings->Security.

aravindsagar said:
Another build available here : http://www.androidauthority.com/android-4-4-kitkat-nexus-4-nexus-7-download-unofficially-313352/.
Flashed this in CWM, everything, including root is absolutely fine. (I flashed SuperSu 1.65 zip). But for the proper google experience, have to wait for the factory images.
The lockscreen widgets functionality (except for the camera widget) seems to have been removed, can anyone find that option anywhere?
Edit: Lockscreen widgets can be enabled in Settings->Security.
Click to expand...
Click to collapse
that is PA AOSP which was built and posted hours ago, also has a thread in orig android dev.
as for lockscreen widgets. they're working fine. look into settings-lockscreen

gonemad02 said:
that is PA AOSP which was built and posted hours ago, also has a thread in orig android dev.
as for lockscreen widgets. they're working fine. look into settings-lockscreen
Click to expand...
Click to collapse
Yeah, just thought I would share this link as well, since for some people, it seemed to break root, but this build worked fine for me, including root.

aravindsagar said:
Yeah, just thought I would share this link as well, since for some people, it seemed to break root, but this build worked fine for me, including root.
Click to expand...
Click to collapse
sorry it's on Settings > Security > then turn it on from there bro! oh alright. enjoy kitktat, have a break!

Do you have some manual to downgrade to 4.3? Because when i do it i lose signal and wifi..
Sent from my Nexus 4 using xda app-developers app

I might wait
Well i was going to try but guess i hold off for official release.Thank you for the videos nice work.

[ROM] [5.1.1] Dr.Ketan ROM L16 N5 port [N910VVRU2BPA1] [5/1/16]

Read this whole OP before doing anything! Especially the bugs list !!!
** I am excited to announce that @dr.ketan 's Note 5 Port (INTERNATIONAL NOTE 4 BASED ROM)works for the Verizon Note 4 ! I am not a developer and do not take credit for this ROM. I only assisted in getting it to work for our phone. Enjoy!!
Give @dr.ketan many thanks and donate to him for developing his Note 5 Port!!: http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568
Give @Battlehero a thanks and donate to him for his time and effort for creating the data fix for our Verizon Note 4 http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
Give @hsbadr a big thanks and donate to him for making this possible with his 5.1.1 Jasmine ROM and multi-system kernel!! http://forum.xda-developers.com/note-4-verizon/development/rom-jasminerom-v1-0-t3113771
Without them, this would not have been possible!
Remember that.
DISCLAIMER: Your warranty is now void. Please be careful make a full TWRP backup of your current Verizon ROM. I am not responsible if you break your phone or lose data on your device!
*A clean flash is a must if you are coming from another ROM or you will run into problems.* Do not post issues if you dirty flashed.
**Note only Dr. Ketan's L16F Note 5 port works for our phone. He has a Marshmallow version out also, so be sure to only download the L16F version.**
Big NOTE: (Puns intended) There are OG Developer's Editions and Converted Retail Editions. OG's, including me, have an aged KitKat 4.4.4 unlocked bootloader and we need to use multi-system kernel that @hsbadr patched to fix the brightness issue that was present during the Lollipop upgrade. We are forever in his debt. Converted Retail Editions have a newer Lollipop 5.1.1 unlocked bootloader meaning they can try other Verizon specific kernels without the brightness issue (You might come across other issues trying other kernels so please state what kernel you're using if you experience an issue). I'm also believing that it is possible that converts can experience issues that OG's don't experience due to the difference in bootloaders, and vice versa. It would be nice to know your build if you experience an issue. Thanks!
Instructions:
1.) Make sure you are on a 5.1.1 modem.
(N910VVRU2BOK3) or (N910VVRU2BPA1)
2.) Download the ROM to your SD
3.) Download the DataFix to your SD
4.) Wipe /system /data /cache /dalvik-cache (/InternalStorage Optional, you will lose your files on the device)*
5.) Flash the ROM.
6.) Flash the DataFix.
7.) Wipe Dalvik and Cache
8.) Reboot. (Will take about 10-15 mins to boot)
9a.) Wait until there is a prompt to install necessary patches and allow root access
9b.) Chose your battery and clock settings then reboot
10.) Go through the setup but do not log into the Samsung account or Google account during initial setup
11.) After the setup log into your google account
12.)Initially there is no calling audio and no My Verizon application support.
To fix this download root browser and navigate to the system folder and edit the build.prop by clicking on the build.prop file > use rb text editor > change these values to:
ro.product.model=SM-N920V
ro.product.name=trltevzw
*Note it is case sensitive*
Then click save
Then using root browser navigate to the system/privapp folder and delete the VzwSilentSSOEngine folder
Then reboot
**Note: On My Verizon you will need to log into your account using your user name and not your number**
13.) Enjoy!!
Once you are at your home screen make sure you are logged into your Google account before accessing Dr. Ketan Tweaks app because there is a dependency app that is required to be installed from the Play Store when you launch Dr. Ketan tweaks app.
To disable infinite scroll on TW launcher go to Dr. Ketan tweaks and long press launcher home scroll then back out and test.
I tested most tweaks and they work as they should. Please post any issues on this thread.
(Please do not try any of the network based features in Ketan's tweaks as they are meant for the international Note 4)
Please read the readme before using the debloater tool to get an idea of what it removes
As of right now there is no xposed support. I will need the help from users to find the best way to get it installed and I will update the OP with instructions.
Downloads:
Again **Note only Dr. Ketan's L16F Note 5 port works for our phone. He has a Marshmallow version out also, so be sure to only download the L16F version.**
Download Dr.Ketan ROM L16F ( N5 port I Theme support I S6 Edge features ) : http://forum.xda-developers.com/showpost.php?p=65792766&postcount=6872
Scroll down to where it says:
"Download*- T-Mobile Users Read*this."
Expand the hidden content to get the download link.
then
Download @Battlehero 4/18/16 Data Fix V3.3 here (Go to the third post and expand "US Variants", look for N910V datafix): http://forum.xda-developers.com/note-4/snapdragon-dev/rom-kyubi-rom-note-5-t3220106
**READ ME**
Bugs:
- No GearVR support
- *MMS does not work correctly on the stock Messaging app (group chats come in and send as individual messages, and unable to send picture messages)
**(Workaround: Use Textra as default messaging app, MMS works like it should)**
- Unable to perform a factory reset within the settings because you will get non-stop FC's once booted up.
- If you do not wipe internal storage any old Note 2 files in you SNote data folder will kill the SNote app. So remove them from that folder and you'll be able to use SNote.
- System update in settings force closes the Settings
- Simultaneous data works at 4G speeds when talking on the phone but it shows it as a 1X connection. (Must have a 4G connection to work)
- To get My Verizon to work:
1. Navigate to /system/priv_app and delete the VzwSilentSSOEngine folder.
2. Edit the system/buid.prop file. Change the model value to SM-N920V and save.
3. Reboot.
4. You need to log into My Verizon using your user name your number will not work
Thanks @stueycaster and @rayjr13
- Verizon Visual Voicemail does not work and may never work
- Screen mirroring may not work
- If you change the model value in the build.prop to Verizon Note 4 model value (SM-N910V) it will break the theme store. Switch it back to SM-N920V to get theme store working again.
Read/search through the original OP threads for any non-Verizon specific issues first.
Credits:
Thank you so much @dr.ketan for developing your Note 5 Port !!
Thank you @Battlehero for creating a data fix for our phone !!
Thank you @hsbadr for your constant development and support for the Verizon Note 4, and of course for Jasmine ROM and multi-system kernel !!!

Reserved
Sent from my SM-N920V using Tapatalk

Awesome, thanks. Gonna try this one out.

Just a question though, which is the main difference between kyubi and this one, I don't want to start which is better but I would like to ask which is main difference thanks a bounch
Sent from my Samsung Galaxy Note5 using XDA Labs

EdrickMG said:
Just a question though, which is the main difference between kyubi and this one, I don't want to start which is better but I would like to ask which is main difference thanks a bounch
Sent from my Samsung Galaxy Note5 using XDA Labs
Click to expand...
Click to collapse
Check the original OPs they have their features listed but in my experience Ketan's has more mods and Kyubi is closer to stock Note 5.
Sent from my SM-N920V using Tapatalk

jcip17 said:
Check the original OPs they have their features listed but in my experience Ketan's has more mods and Kyubi is closer to stock Note 5.
Click to expand...
Click to collapse
I have seen that comes with a bounch of mods, some cool, but a little bit to much tweaks for me, but wonderful there are some other Roms could be used, thanks for testing it out and posted it
Sent from my Samsung Galaxy Note5 using XDA Labs

EdrickMG said:
I have seen that comes with a bounch of mods, some cool, but a little bit to much tweaks for me, but wonderful there are some other Roms could be used, thanks for testing it out and posted it
Sent from my Samsung Galaxy Note5 using XDA Labs
Click to expand...
Click to collapse
Most of the tweaks are optional. His tweak app lets you pick it's awesome that he created that. But yeah ROM options are always a good thing !
Sent from my SM-N920V using Tapatalk

google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
out going calls not working for me, i'm able to see the seconds on the call but not hearing anything.....

laughingcolors said:
google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
Click to expand...
Click to collapse
Hmm that didn't happen to me but I do know that google playstore will update eventually so that might be causing problems. Also did you log in during the initial setup? I didn't not sure if it makes a difference.
Sent from my SM-N920V using Tapatalk

laughingcolors said:
google play app closes on me pretty often. i've tried force clearing cache and stopping play store.... not much luck, restoring apps via titanium,but any other ways to fix this? everything else is looking good so far.
---------- Post added at 02:06 AM ---------- Previous post was at 02:03 AM ----------
out going calls not working for me, i'm able to see the seconds on the call but not hearing anything.....
Click to expand...
Click to collapse
You changed the value in the build.prop on step 11?? That is what fixes the calling issue. Hmm are you a Retail convert or you had a dev edition?
Sent from my SM-N920V using Tapatalk

have a developer edition, no i didn't change any build props , i will try but haven't done that...
---------- Post added at 02:11 AM ---------- Previous post was at 02:10 AM ----------
jcip17 said:
Hmm that didn't happen to me but I do know that google playstore will update eventually so that might be causing problems. Also did you log in during the initial setup? I didn't not sure if it makes a difference.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
yeah i did log in in initial setup, not on the samsung part though.

laughingcolors said:
have a developer edition, no i didn't change any build props , i don't know how...
Click to expand...
Click to collapse
Yeah you have to do that. Download root browser go to the system folder > Click on the build.prop file > use rb text editor > find those two values towards the top and change them to what is listed on step 12. It is case sensitive > then click save > then reboot calling will work
That is weird about the play store. If you don't mind try starting over and skip both the google sign in and samsung sign in
Sent from my SM-N920V using Tapatalk

jcip17 said:
You changed the value in the build.prop on step 11?? That is what fixes the calling issue. Hmm are you a Retail convert or you had a dev edition?
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
changing the build prop worked, thanks !

laughingcolors said:
changing the build prop worked, thanks !
Click to expand...
Click to collapse
Good to hear man ! Did the play store stop acting up?
Sent from my SM-N920V using Tapatalk

@jcip17.....wow you just keep the hits coming!! So many customizations. I haven't taken the plunge yet. ..but will soon. Thank you for bringing these note5 ports over to us. I know where the credits go ....just wanted to thank you for doing your part! Hahaha.
Sent from my SM-N920F using XDA-Developers mobile app

jcip17 said:
Good to hear man ! Did the play store stop acting up?
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
no it closes after it starts a download. i'll give it time to settle i guess.

laughingcolors said:
no it closes after it starts a download. i'll give it time to settle i guess.
Click to expand...
Click to collapse
Damn ok wait till it updates itself. You'll get the Google Play Store splash screen when you launch it once it's done updating. Hopefully that fixes it. I really wonder if logging on during the setup causes that. Regardless I updated the OP to hold off on logging onto google until after initial setup to make it exactly how I had it set up.
Sent from my SM-N920V using Tapatalk

gcounts said:
@jcip17.....wow you just keep the hits coming!! So many customizations. I haven't taken the plunge yet. ..but will soon. Thank you for bringing these note5 ports over to us. I know where the credits go ....just wanted to thank you for doing your part! Hahaha.
Sent from my SM-N920F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks man I really appreciate that !
Sent from my SM-N920V using Tapatalk

why won't the mm version work...

lolwatpear said:
why won't the mm version work...
Click to expand...
Click to collapse
We don't have a Verizon MM kernel or MM modem. We only have Lollipop for now. Once we receive a MM Verizon update then maybe we'll be able to get it to work for our phone. Something to look forward to !
Sent from my SM-N920V using Tapatalk

Note 7 s pen features for note 5

Hello according to the topic has anyone got it yet? Is it possible to port it to our note 5 without rooting the phone?
Sent from my SM-N9208 using XDA-Developers mobile app

yuskhayru said:
Hello according to the topic has anyone got it yet? Is it possible to port it to our note 5 without rooting the phone?
Sent from my SM-N9208 using XDA-Developers mobile app
Click to expand...
Click to collapse
Certain features are available, like the Smart Select (GIF capture) by installing the latest SmartSelect (Note7 version) apk from apkmirror.

RazorMC said:
Certain features are available, like the Smart Select (GIF capture) by installing the latest SmartSelect (Note7 version) apk from apkmirror.
Click to expand...
Click to collapse
Ok thanks. Ill try find it.
Sent from my SM-N9208 using XDA-Developers mobile app

RazorMC said:
Certain features are available, like the Smart Select (GIF capture) by installing the latest SmartSelect (Note7 version) apk from apkmirror.
Click to expand...
Click to collapse
Thank you so much but do you know beside Smart Select, any other feature work yet?

Nguyendaovietnam said:
Thank you so much but do you know beside Smart Select, any other feature work yet?
Click to expand...
Click to collapse
Sorry, I haven't tried any other feature apart from that. The GIF capture was the only feature I was interested in.
Translate does not work as of yet but others might. You can backup the current apk and then install new versions of them to update the features.

RazorMC said:
Sorry, I haven't tried any other feature apart from that. The GIF capture was the only feature I was interested in.
Translate does not work as of yet but others might. You can backup the current apk and then install new versions of them to update the features.
Click to expand...
Click to collapse
Thank you! I already install the new apk for gif capture but I dont really gonna use that. So anyway to rollback the note 5 version because I didnt know that I have to backup and now I cant even Uninstall it

Nguyendaovietnam said:
Thank you! I already install the new apk for gif capture but I dont really gonna use that. So anyway to rollback the note 5 version because I didnt know that I have to backup and now I cant even Uninstall it
Click to expand...
Click to collapse
No need to uninstall, just keep using the new one, it's much better.