So today i got a notification that Kitkat is available for my HTC One and after downloading it i got a message notifying me that my phone is probably modified and that i can't install the update for my protection.
So can anyone please tell me which RUU should i use to return to stock? and if there is no RUU for my model then is there any Nand backup?
Here is my phone info:
** UNLOCKED **
M7_U PVT SHIP S-OFF RH
CID-HTC__032
HBOOT-1.44.0000
RADIO-4A.21.3263.04
OpenDSP-v31.120.274.0617
eMMC-boot
Thanks in advance.
Need an output of fastboot getvar all (remove imei/sn info) to suggest what to try.
SaHiLzZ said:
Need an output of fastboot getvar all (remove imei/sn info) to suggest what to try.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei: 3
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3982mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
DArkSm4sh said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei: 3
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3982mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
Click to expand...
Click to collapse
have you changed your cid? Normally cid HTC__032 is for PN0710000 not for PN0711000...
alray said:
have you changed your cid? Normally cid HTC__032 is for PN0710000 not for PN0711000...
Click to expand...
Click to collapse
Yes i did, it was Zero's or One's (Can't remember exactly) which is as i was told a super CID and another user told me to change it to HTC__032 to be able to flash a rom when i my phone had problems one week ago.
DArkSm4sh said:
Yes i did, it was Zero's or One's (Can't remember exactly) which is as i was told a super CID and another user told me to change it to HTC__032 to be able to flash a rom when i my phone had problems one week ago.
Click to expand...
Click to collapse
you can change back cid to match PN0711000 MID and run the 1.29.401.2 ruu.exe
compatible cid:
HTC__001
HTC__J15
HTC__A48
HTC__M27
or
Change MID to match CID HTC__032 and run the 1.28.401.7 ruu.exe
required MID: PN0710000
If you are noob at this then the first solution is easier
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
then run the ruu
if you have some knowledge then changing mid to PN0710000 and using the 1.28.401.7 is the best solution imo. why? because this version get ota pretty much faster then PN0711000
if you want to change MID you will need this tool. when in recovery, adb push it to your sdcard and then run it from recovery. then run the ruu.exe
feel free to ask if this is not clear.
alray said:
you can change back cid to match PN0711000 MID and run the 1.29.401.2 ruu.exe
compatible cid:
HTC__001
HTC__J15
HTC__A48
HTC__M27
or
Change MID to match CID HTC__032 and run the 1.28.401.7 ruu.exe
required MID: PN0710000
If you are noob at this then the first solution is easier
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
then run the ruu
if you have some knowledge then changing mid to PN0710000 and using the 1.28.401.7 is the best solution imo. why? because this version get ota pretty much faster then PN0711000
if you want to change MID you will need this tool. when in recovery, adb push it to your sdcard and then run it from recovery. then run the ruu.exe
feel free to ask if this is not clear.
Click to expand...
Click to collapse
Edit: Already got the answer.
Thanks a lot, i will change the MID using the provided tool. I have a final question, do i have to lock the bootloader before running the RUU?
DArkSm4sh said:
Edit: Already got the answer.
Thanks a lot, i will change the MID using the provided tool. I have a final question, do i have to lock the bootloader before running the RUU?
Click to expand...
Click to collapse
not with s-off
alray said:
not with s-off
Click to expand...
Click to collapse
Since i am S-off then i don't have to relock it right?
That is exactly what @alray has said. NO need to relock with S-OFF.
Related
Hi guys i solved the prev problem but now i want to get back to stock an i couldn't find which is the best stock rom for my htc one
am confused between
HTML:
RUU_M7_UL_JB_50_hTC_Asia_WWE_1.26.707.5_Radio_4A.13.3231.20_10.30.1131.05_release_309365_signed_2_4.exe
&
HTML:
RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe
and if there is another is more suitable please tell me
thanx
this is my phone info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ***************
(bootloader) imei: *************
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
LilbrownMeko said:
this is my phone info
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: [COLOR="Green"][B]1.54[/B][/COLOR].0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [COLOR="red"][B]PLEASE REMOVE[/B][/COLOR]
(bootloader) imei: [B][COLOR="Red"]PLEASE REMOVE!!![/COLOR][/B]
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: [B][COLOR="Green"]PN0711000[/COLOR][/B]
(bootloader) cidnum: [COLOR="green"][B]HTC__j15[/B][/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) [COLOR="green"][B]security: on[/B][/COLOR]
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
From what I see from your ''fastboot getvar all'' your CID is HTC__J15 and MID PN0711000 so you need a .401 base RUU like this one : http://www.htc1guru.com/dld/ruu_m7_u_jb_50_htc_europe_1-29-401-2_r_radio_4a-14-3250-13_10-33-1150-01_release_311663_signed_2_4-exe/ not a .707
But you are S-on, you shouldn't be able to run a RUU because it require Hboot downgrade to 1.44 (you are on 1.54)
Maybe you should go with a guru reset from htc1guru.com or attemp to s-off and run the 1.29.401 ruu.exe
---------- Post added at 01:43 AM ---------- Previous post was at 01:38 AM ----------
and you should take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2541082
everything explained to return 100 stock
AND DELETE IMEI AND SN FROM YOUR LAST POST!!!!!
---------- Post added at 01:54 AM ---------- Previous post was at 01:43 AM ----------
LilbrownMeko said:
I have htc one
at the first time i tried to change my rom to google edition i flashed new Kernel Bulletproof-m7-11.0 i relocked my bootloader
S-Off and changed my cid from htc__j15 to GOOGL001
now i'm stucked i cant
What i need guys is
to get my one out of this loop and return to stock with no trace
I spent the whole day searching for it but no result
Please help guus
------------
htc one wwe
modelide PN0711000
Click to expand...
Click to collapse
Why did you go s-on again!? Big mistake...
But you are S-on, you shouldn't be able to run a RUU because it require Hboot downgrade to 1.44 (you are on 1.54)
Maybe you should go with a guru reset from htc1guru.com or attemp to s-off and run the 1.29.401 ruu.exe
and you should take a look at this thread: http://forum.xda-developers.com/show....php?t=2541082
everything explained to return 100 stock
AND DELETE IMEI AND SN FROM YOUR LAST POST!!!!!
Why did you go s-on again!? Big mistake...
Click to expand...
Click to collapse
@alray
if i down grade my hboot is it gonna effect my device preformance and can i receive the OTA updates??
why getting S-ON is Big mistake...??
Sorry for asking a lot
LilbrownMeko said:
if i down grade my hboot is it gonna effect my device preformance
Click to expand...
Click to collapse
We don't care! Let me explain: you have to downgrade hboot to 1.44 to be able to run that ruu I linked above. After the ruu process is complete you will receive ota and hboot will update to latest version avail.
LilbrownMeko said:
can i receive the OTA updates??
Click to expand...
Click to collapse
Yes after a RUU restore, your device will be 100% stock (stock OS, stock recovery etc...) so as long your MID and CID match the ruu, you will receive ota updates.
LilbrownMeko said:
why getting S-ON is Big mistake...??
Click to expand...
Click to collapse
Allways stay s-off !!! If you still were s-off, you simply had to run that ruu.exe i linked above. Now with s-on you can't downgrade hboot. Nothing guarantee you will be able to s-off again when you go back s-on. so better to stay s-off.
now go read that thread I linked above (nkk71 guide to return stock) and you will find many options to return stock. You can also use a decrypted ruu.zip and edit the android-info.txt to match your mid and cid.
LilbrownMeko said:
@alray
if i down grade my hboot is it gonna effect my device preformance and can i receive the OTA updates??
why getting S-ON is Big mistake...??
Sorry for asking a lot
Click to expand...
Click to collapse
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
so get s-off using rumrunner, then use this ruu: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
EDIT: hold on, once s-off, change your CID "fastboot oem writecid HTC__J15" (two underscores, and capital J, not lowercase), why is it lowercase??
EDIT: hold on, once s-off, change your CID "fastboot oem writecid HTC__J15" (two underscores, and capital J, not lowercase), why is it lowercase??
Click to expand...
Click to collapse
@nkk71 I Don't know why it's lowercase but if you didn't recognized that the main version doesn't exist !!!!
Why is that ???
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3945mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I'm now S-OFF @alray
my "(bootloader) version-main: " is empty ???? does it mean any thing
and what's the difrent between orginal CID and SuperCID ??
LilbrownMeko said:
@nkk71 I Don't know why it's lowercase but if you didn't recognized that the main version doesn't exist !!!!
Why is that ???
Click to expand...
Click to collapse
LilbrownMeko said:
Code:
fastboot getvar all
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__j15
and what's the difrent between orginal CID and SuperCID ??[/QUOTE]
1- yes, i saw that, but didnt care cause you're s-off; it sometimes happens when trying to flash a firmware package and it doesnt go through successfully.
2- SuperCID is 11111111 (8 ones), then you can use any ruu you like, but it won't let you get any OTAs
3- so recommend you set HTC__J15, so you can receive OTAs
4- keep S-OFF !!
Click to expand...
Click to collapse
1- yes, i saw that, but didnt care cause you're s-off; it sometimes happens when trying to flash a firmware package and it doesnt go through successfully.
2- SuperCID is 11111111 (8 ones), then you can use any ruu you like, but it won't let you get any OTAs
3- so recommend you set HTC__J15, so you can receive OTAs
4- keep S-OFF !!
Click to expand...
Click to collapse
@nkk71
I did as You said Now am on stock FrimWare Stock recovery no root and I have one problem that is when i come to update the phone i'ts directly reboot to recovery and beacuse i don't have custom recovery it's restore the factory rest and delet all data on SD even the OTA file and no update happen
what should i do
and why this happening??
OTA Update is::2.24.401.2 JB 4.2.2
My phone current info
Code:
bootloader Status : Relocked
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
LilbrownMeko said:
@nkk71
I did as You said Now am on stock FrimWare Stock recovery no root and I have one problem that is when i come to update the phone i'ts directly reboot to recovery and beacuse i don't have custom recovery it's restore the factory rest and delet all data on SD even the OTA file and no update happen
what should i do
and why this happening??
OTA Update is::2.24.401.2 JB 4.2.2
My phone current info
Code:
bootloader Status : Relocked
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
Click to expand...
Click to collapse
sorry, didnt understand exactly, so you ran the RUU -> so yes, you'll be 100% stock (including stock recovery, which is needed anyway), you reboot and get the notification for update to 2.24.401.2 and during update it goes to stock recovery which is normal.
What am i misunderstanding?
sorry, didnt understand exactly, so you ran the RUU -> so yes, you'll be 100% stock (including stock recovery, which is needed anyway), you reboot and get the notification for update to 2.24.401.2 and during update it goes to stock recovery which is normal.
What am i misunderstanding?
Click to expand...
Click to collapse
@nkk71
after the update finish downloading i click ok install now "the device reboot to recovery but instade of updating it's start to factory rest "
LilbrownMeko said:
@nkk71
after the update finish downloading i click ok install now "the device reboot to recovery but instade of updating it's start to factory rest "
Click to expand...
Click to collapse
very strange, did the ruu complete successfully? Maybe try running the ruu again, and do the update again.
Hi everybody,
I need RUU for HTC one UNLOCKED. Is there any body can help me to download the right RUU please?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thank you
rprx134 said:
Hi everybody,
I need RUU for HTC one UNLOCKED. Is there any body can help me to download the right RUU please?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA395W910960
(bootloader) imei: 357864054808579
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3991mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2182823
Find your modelid from the list and that is the correct firmware for your device.
rprx134 said:
Hi everybody,
I need RUU for HTC one UNLOCKED. Is there any body can help me to download the right RUU please?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FAxxxxxxxxxxxx
(bootloader) imei: 35xxxxxxxxxxxxxxx
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
Thank you
Click to expand...
Click to collapse
1- remove your IMEI and s/n, ask above post to do the same
2- http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Bootloader help
nkk71 said:
1- remove your IMEI and s/n, ask above post to do the same
2- http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Click to expand...
Click to collapse
Hello nkk71, Thanks for the download link. The Download link says You may need to flash hboot 1.44 before the RUU will install. So i downloaded the required file and booted my device into boot-loader mode and flashed the firmware with "fastboot flash zip 1.29.401.12_hboot_1.44.zip" command. My H-Boot verison was changed to 1.44 successfully. but when i tried to connect my device into boot loader mode again my Computer is not recognizing the device. It says the device connected to the computer malfunctioned.Please help me to solve this issue.
Thanks.
rprx134 said:
Hello nkk71, Thanks for the download link. The Download link says You may need to flash hboot 1.44 before the RUU will install. So i downloaded the required file and booted my device into boot-loader mode and flashed the firmware with "fastboot flash zip 1.29.401.12_hboot_1.44.zip" command. My H-Boot verison was changed to 1.44 successfully. but when i tried to connect my device into boot loader mode again my Computer is not recognizing the device. It says the device connected to the computer malfunctioned.Please help me to solve this issue.
Thanks.
Click to expand...
Click to collapse
Are you running windows 8.1, 8.1 has a driver issue with fastboot and hboot 1.44.
Only option is Lynux boot usb / disk or use another PC running Win 8 or 7
Download this one:
RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_release_311663_signed_2_4
from this site:
http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
badjoras said:
Download this one:
RUU_M7_U_JB_50_HTC_Europe_1.29.401.2_R_Radio_4A.14.3250.13_10.33.1150.01_release_311663_signed_2_4
from this site:
http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
Click to expand...
Click to collapse
That one is for PN0711000 (m7 u) not PN0710000 (m7 ul)!!
Sent from my HTC One using Tapatalk
nkk71 said:
That one is for PN0711000 (m7 u) not PN0710000 (m7 ul)!!
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I am very sorry, misread it.
http://www.htc1guru.com/dld/ruu_m7_..._10-27-1127-01_release_308001_signed_2_4-exe/
There you go
badjoras said:
I am very sorry, misread it.
http://www.htc1guru.com/dld/ruu_m7_..._10-27-1127-01_release_308001_signed_2_4-exe/
There you go
Click to expand...
Click to collapse
Sorry mate, "1-20-401-1" is no good either has hboot 1.43, and won't receive any OTAs; maybe it's a pre-release.
the one i linked before 1.28.401.7 should be fine.
I'm making a fool out of myself i guess. I was trying to send you the .29 for the 71k and couldn't manage to do it in 2 attempts looool.
You'll do good on the .28, you can update it via OTA, it's only 2 flashes away from .29
Please help me find the right RUU for HTC One
nkk71 said:
1- remove your IMEI and s/n, ask above post to do the same
2- http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Click to expand...
Click to collapse
Hello, I have to find the right RUU file to download for my HTC One which was initially locked with 3(UK) and unlocked later. These are the details of my device,
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.771.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4197mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Please help me to find the right RUU
Thanks.
rprx134 said:
Hi everybody,
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
Thank you
Click to expand...
Click to collapse
rprx134 said:
Hello, I have to find the right RUU file to download for my HTC One which was initially locked with 3(UK) and unlocked later. These are the details of my device,
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-main: 2.24.771.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: H3G__001
I need RUU for HTC one UNLOCKED. Is there any body can help me to download the right RUU please?
Click to expand...
Click to collapse
OP, which one, you sort of need to make up your mind.... and state the purpose of this exercise.
nkk71 said:
OP, which one, you sort of need to make up your mind.... and state the purpose of this exercise.
Click to expand...
Click to collapse
Sorry for that, I have two HTC One devices, I already got an RUU which you suggested for the device of cid number - HTC_001, now i am in need of an RUU for my another device of cid number - H3G_001 to unroot and relock it. Sorry for not mentioning that properly in advance. Thanks for your reply.
rprx134 said:
Sorry for that, I have two HTC One devices, I already got an RUU which you suggested for the device of cid number - HTC_001, now i am in need of an RUU for my another device of cid number - H3G_001 to unroot and relock it. Sorry for not mentioning that properly in advance. Thanks for your reply.
Click to expand...
Click to collapse
There is no RUU for H3G, you have two choices:
1- either change it to international unbranded
or
2- use my guide (CWM method), to restore to stock H3G: http://forum.xda-developers.com/showthread.php?t=2541082
(read it once or twice, to see if everything makes sense to you)
Procedures for a change to international unbranded
nkk71 said:
There is no RUU for H3G, you have two choices:
1- either change it to international unbranded
or
2- use my guide (CWM method), to restore to stock H3G: http://forum.xda-developers.com/showthread.php?t=2541082
(read it once or twice, to see if everything makes sense to you)
Click to expand...
Click to collapse
Hello nkk71,
I wish to change my device to international unbranded. Please provide me with procedures to do that. Waiting for your reply
Thanks in advance.
rprx134 said:
Hello nkk71,
I wish to change my device to international unbranded. Please provide me with procedures to do that. Waiting for your reply
Thanks in advance.
Click to expand...
Click to collapse
change CID to one of the following:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Norway
my guess would be WWE (World Wide English) for you:
fastboot oem writecid HTC__001 <- two underscores
fastboot reboot-bootloader
then use this ruu.zip method in my guide using
RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7
nkk71 said:
change CID to one of the following:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Norway
my guess would be WWE (World Wide English) for you:
fastboot oem writecid HTC__001 <- two underscores
fastboot reboot-bootloader
then use this ruu.zip method in my guide using
RUU Zip M7_UL_JB_50_HTC_Europe_1.28.401.7
Click to expand...
Click to collapse
Thanks a lot for your reply. It worked!!
Hello,
I'd like to ask anyone here for a stock RUU for the CID: HTC__K18 modelid: PN0711000
Or maybe not rooted nandroid backup.
Thanks in advance.
saturn_frak said:
Hello,
I'd like to ask anyone here for a stock RUU for the CID: HTC__K18 modelid: PN0711000
Or maybe not rooted nandroid backup.
Thanks in advance.
Click to expand...
Click to collapse
It looks like you can use the X.XX.401.X RUU for you CID. You can find one here. Just make sure that you get the same or higher RUU for your ROM version.
majmoz said:
It looks like you can use the X.XX.401.X RUU for you CID. You can find one here. Just make sure that you get the same or higher RUU for your ROM version.
Click to expand...
Click to collapse
My info now:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA37FW900005
(bootloader) imei: 354435053251112
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
I'll try the 401 thanks
Please remove your serialno & imei from your post. The rest of the world don't need to know it.
Sent from my HTC One using XDA Premium 4 mobile app
First used:
http://shoot-a-droid.blogspot.co.il/2013/06/hboot-htc-one-s-off-modded-stock-eng.html
To flash 1.44 hboot
saturn_frak said:
First used:
http://shoot-a-droid.blogspot.co.il/2013/06/hboot-htc-one-s-off-modded-stock-eng.html
To flash 1.44 hboot
Click to expand...
Click to collapse
Before you flash a different hboot, take a look at Guru Stock Rom Resets first. There is one for your version number, I don't know what type of checking it does but you might have to change your MID first. You can use this [Tool] MID change without ENG HBOOT.
Hi everyone
I have rooted my phone and I want to unroot it but I can`t find my RUU
would you please help me to find it ?
my phone is HTC One 801s
there is my phone information:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.708.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -------------
(bootloader) imei: ---------------
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 3920mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thanks in advance.....
I believe you can flash any ruu as you are s-off, however if you want your particular one then have a look at the site linked below. You may also have to write super cid to your device first though, quiet easy, just a simple fastboot command.
Www.htc1guru.com
There is however a whole thread devoted to your model of phone.
thanks for your answer
but would you please tell me what is super cid ?!
and what is for ?
pfsms said:
thanks for your answer
but would you please tell me what is super cid ?!
and what is for ?
Click to expand...
Click to collapse
you can either flash the 2.24.708.4 ruu from here or change your CID and MID to use another version RUU
pfsms said:
thanks for your answer
but would you please tell me what is super cid ?!
and what is for ?
Click to expand...
Click to collapse
Your CID at the moment is HTC__622
Super CID is 11111111
You would then have to change your MID to the ROM version / area you want to flash.
Is It necessary to change my MID for installing RUU ?
pfsms said:
Is It necessary to change my MID for installing RUU ?
Click to expand...
Click to collapse
MID needs to match the RUU you are installing, so if you decide to run an RUU with an MID of PN0714000 which is the same as your then no need to change it.
If you want to install an RUU with a different MID then you need to change it.
pfsms said:
Is It necessary to change my MID for installing RUU ?
Click to expand...
Click to collapse
Seanie280672 said:
MID needs to match the RUU you are installing, so if you decide to run an RUU with an MID of PN0714000 which is the same as your then no need to change it.
If you want to install an RUU with a different MID then you need to change it.
Click to expand...
Click to collapse
a lot of times it's much easier to just get the decrypted RUU / Rom.zip
and edit the android_info.txt to match your model instead of changing CID and MID all the time
Hi Guys,
I recently got my hands on a used M7 but noticed that it is still stuck in Andriod 4.1.2. I tried running the RUU but when I check for OTA updates it still says no updates available.
I also discovered that there is a label that says this is a test device, perhaps that stops the device from getting OTA updates?
Here is what I got from fastboot:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3231.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4230mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
It will be great if someone can help me update this device Thanks!
Divinity Shins said:
Hi Guys,
I recently got my hands on a used M7 but noticed that it is still stuck in Andriod 4.1.2. I tried running the RUU but when I check for OTA updates it still says no updates available.
I also discovered that there is a label that says this is a test device, perhaps that stops the device from getting OTA updates?
Here is what I got from fastboot:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.43.0000
(bootloader) version-baseband: 4A.13.3231.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.707.5
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: Remove
(bootloader) imei: Remove
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4230mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
It will be great if someone can help me update this device Thanks!
Click to expand...
Click to collapse
In your post remove the imei and serialno.
You need to change your MID to PN0714000 and your CID to HTC__044 (eight characters). If you still do not receive OTA, here is a custom unsigned RUU 3.63.707.4 that you flash in bootloader. Or you could flash Guru_reset_m7_3-63-707-4-zip in TWRP.
majmoz said:
In your post remove the imei and serialno.
You need to change your MID to PN0711000 and your CID to HTC__044 (eight characters). If you still do not receive OTA, here is a custom unsigned RUU 3.63.707.4 that you flash in bootloader. Or you could flash Guru_reset_m7_3-63-707-4-zip in TWRP.
Click to expand...
Click to collapse
majmoz, sorry to bug in, but i would recommend PN0710000 or PN0714000 because PN0711000 is the m7_u, and the OP has an m7_ul
majmoz said:
In your post remove the imei and serialno.
You need to change your MID to PN0714000 and your CID to HTC__044 (eight characters). If you still do not receive OTA, here is a custom unsigned RUU 3.63.707.4 that you flash in bootloader. Or you could flash Guru_reset_m7_3-63-707-4-zip in TWRP.
Click to expand...
Click to collapse
Hi,
Thanks for reminding me about the imei & serial#.
I assume this is the tool that I should use to change the CID and MID?
http://forum.xda-developers.com/showthread.php?t=2535365
Sounds like flashing the custom RUU is an easier choice to me. I shall try changing the CID and MID first.
@Divinity Shins
what region are you in / what do you want your phone to be
a) European unbranded
b) Asian unbranded
?
nkk71 said:
@Divinity Shins
what region are you in / what do you want your phone to be
a) European unbranded
b) Asian unbranded
?
Click to expand...
Click to collapse
I'm in Hong Kong, but I don't really mind which area as long as I get the Andriod 4.4 now and all the future HTC upgrades (i.e Andriod L).
Divinity Shins said:
I'm in Hong Kong, but I don't really mind which area as long as I get the Andriod 4.4 now and all the future HTC upgrades (i.e Andriod L).
Click to expand...
Click to collapse
Sorry, I'm out at the moment to give detailed instructions, but you could go for PN0710000 and HTC__001 (European unbranded) and flash a x.xx.401.x ruu
Divinity Shins said:
I'm in Hong Kong, but I don't really mind which area as long as I get the Andriod 4.4 now and all the future HTC upgrades (i.e Andriod L).
Click to expand...
Click to collapse
not to jump nkk71 replies, but I just changed my phone to Dev edition last night in 30mins, it was very easy and got OTA's straight after booting.
Change cid to BS_US001 (always 8 characters)
Change MID to PN0712000 using this tool in a custom recovery: http://forum.xda-developers.com/showthread.php?t=2535365
download this firmware, put your phone into RUU mode and don't forget to flash it twice: https://www.androidfilehost.com/?fid=23329332407579901
download this RUU and run it with your phone in fastboot USB mode: http://www.htc1guru.com/dld/ruu_m7_..._10-38r-1157-04l_release_353887_signed_3-exe/
DONE !!!
I did it! Thanks everyone for the help :fingers-crossed: