[Q] No cellular signal - HTC One - One (M7) Q&A, Help & Troubleshooting

Hello, I have a HTC One.
I was trying to upgrade my radio after installing a new custom rom using twrp. I accidently tried to install the fastboot version of the baseband instead of the recovery flashable version with twrp. The install failed. When I rebooted my phone I was not picking up any cellular signal. In the settings under Baseband version it says “unknown”, also says “unknown” for my IMEI.
I have tried:
- installing the correct recovery flashable version with twrp.
- restoring to my backup that was made before making any changes.
- restoring back to a stock Rogers rom.
I am still not picking up any cellular signal. I also, tried to do a full firmware/radio flash using fastboot, but I received a “remote: 41 model id check fail” error.
I got the radio files from the follow link:
http://forum.xda-developers.com/showthread.php?t=2485319
If anyone has any suggestions or know what else it can try it would be appreciated.
Device info:
- Rogers htc one that is carrier unlocked running Bell SIM
- Bootloader unlocked, Rooted, S-OFF
- TWRP version 2.6.3.3
- CID = ROGER001, HBOOT = 1.44.0000
- trying to install rom from http://forum.xda-developers.com/showthread.php?t=2531235

If you have S-OFF, you have probably saved your bum
Have you tried flashing a full RUU yet? You will need to find a RUU with a CID of ROGER001
It is also *possible* that you could change your CID to 1111111.
Let me see what I can find for you.
---------------------
Quick search didn't turn up anything for the ROGER001, have you ever changed CID? I would change it to the brightstar one and flash that...
---------------------
Here we go!
http://forum.xda-developers.com/showthread.php?t=2636103
Read the guide for flashing RUU's and you should be good to go!

Change your CID to BS_US001 and run the RUU listed here: http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_brightstarus_wwe_1-29-1540-16-exe/
There is no RUU for Rogers/Bell/Telus.

Thanks
Thank you guys. Changing my CID and flashing with the brightstar RUU fixed my cellular signal issues. You guys are the best.
The RUU has made my phone close to stock. I am back to HTC sense software and I was able to do an OTA update. The only thing I still have is S-OFF. Also, upgraded my HBOOT to 1.56.
What I would like to know, is it possible to make my phone seem like the GPE version HTC One and get OTA updates from Google and have no HTC sense software. My dream is to be able to pick any hardware and run vanilla android, and receive the updates right away. Please let me know if there is a way.
Once again thanks for the help you guys saved a phone.

Related

Is it possible to go back to Stock - Completely - To sell the phone?

I have a Mint Condition HTC One phone I am trying to sell - Mostly just because I also own a Nexus 4 and love it - and decided I'd rather keep it and use the money on the HTC One on something else.
I'm having a hard time selling it because the "everything is unlocked" is making people scared to buy it.
It's S-OFF, SuperCID, TWRP 2.6.0.1, Bootloader Unlocked, Running 2.24 Firmware and Android Revolution 12.1, Sim Unlocked too.
It's originally a Rogers Canada HTC One
Is there any way (or guide) to completely make it stock again to help sell it? Any help would be appreciated.
Yep, just flash the Rogers RUU (if available) and then you're good to go! If there isn't one then use one of the Nandroids provided and then get the stock recovery and relock the bootloader
don't forget to go back to S-ON after flashing the RUU
herwegan said:
don't forget to go back to S-ON after flashing the RUU
Click to expand...
Click to collapse
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
bigystyle84 said:
Hmm... never flashed a RUU before. Will need to do some reading.
Anyone know where to find a Rogers RUU?
I don't care if its Rogers specifically - it can be Telus or Bell too as long as it works.
I just want to go back to Stock so it's capable of updating OTA somehow if possible.
Click to expand...
Click to collapse
just download the RUU (sorry, don't know if there is one for your carrier), be sure to be s-off, and then run the RUU.exe or flash the RUU.zip.
the RUU will flash stock recovery, stock rom and i think it will even relock your bootloader. and then you'll be able to download OTA-updates again.
last step is to put it back to s-on and you should be done..
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
EnIXmA said:
Ruu for bell. Rogers, telus is not available yet, your best bet is to flash the stock wwe Ruu. Remember to flash the stock hboot if you are using a modified hboot for the red lines or you would brick your device
Sent from my HTC One using XDA Premium HD app
Click to expand...
Click to collapse
Thanks
I'm S-OFF using the Revone Method
I'm on firmware 2.24 and HBoot 1.54 (Still S-Off though)
If anyone has time, can somebody give me a real quick overview on what I need to do? I'll buy ya a beer!
I'm not real familiar with HTC Devices - This was my first experience and to be honest, Right now I'm wishing I didn't do this if I knew before hand I was going to flip it so fast.
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
herwegan said:
Ok no problem
First download the RUU from here: http://forum.xda-developers.com/showthread.php?p=39588860
and run the .exe.
then you'll have stock hboot and stock recovery + stock rom.
After this you can use hasoon2000's toolkit to get back to s-on: http://forum.xda-developers.com/showthread.php?t=2183942
Be sure you never installed a custom hboot before and you are using a official hboot. Better check twice if the red warning text is there before you go s-on
And that's it
No beer needed, "thanks-button" is enough
Cheers
Click to expand...
Click to collapse
You cant run the RUU with Super CID. You will have to change it to one that matches the RUU you choose before running it, but keep s-off. Then you should be able to use the tool as mentioned above or do all the things manually. You can use my guide if you like:
http://forum.xda-developers.com/showthread.php?p=43458497
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
bigystyle84 said:
Thanks for the help.
Which specific RUU should I flash? I don't see a Generic WWE One in that thread - just a couple of WWE ones for Developer Editions. Should I use an AT&T one? I can change the CID back to whatever is needed.
Click to expand...
Click to collapse
you could take the latest open europe RUU (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7), or take an AT&T one.. don't really know which one would be better for your situation you'll know it better
Am I able to do this somehow with the Nandroid backup for Rogers in that thread?
Click to expand...
Click to collapse
this is also an option. you can flash this nandroid backup through cwm recovery. but then you'd have to manually install stock recovery and lock the bootloader/go back to s-on. why not :good:
Also - What do you mean by "check for the red lines" exactly? I am on HBoot 1.54, Is there a easy way of going back to 1.44?
Click to expand...
Click to collapse
you can stay on 1.54 if everything works fine after flashing the older firmware. the "warning text" is related to this thread: http://forum.xda-developers.com/showthread.php?t=2316726
but if you've never installed a custom HBoot you don't have to worry about this when going back to s-on. just check once if the red warning text in the bootscreen is there.
Sorry for all the questions - I'm kinda annoyed there isn't a Rogers RUU available. Last thing I need is a bricked phone - I'm only selling it as I honestly I shouldn't have bought it to begin with (Financially)
Click to expand...
Click to collapse
hope it works :fingers-crossed:
crushalot said:
Where are you going to try and sell it? If to another user in Canada with one of those carriers, then they wouldn't to buy the unit with a AT&T image on it, I would think.
However running the ATT one would be a very easy way to reset everything including the hboot (no worry about red lines if run the RUU). Then you could sell to a US buyer who is going to use ATT (Tmobile also has a RUU). My guide for reseting to ATT:
http://forum.xda-developers.com/showthread.php?p=43458497
There are some threads around here where users are resetting Rodgers back to stock but it is much harder without a RUU and I am not sure of your comfort level.
To use one of the Rodgers Nandroids to do a complete reset to stock I would:
Change the CID to CWS__001 and run the ATT RUU to reset all your firmware, hboot etc, back to stock. You will still have unlocked bootloader and s-off, so you can then change back to your stock CID and then use the fastboot command to boot (but not install) a custom recovery in order to restore the Rodgers Nandroid and then just relock and s-on. Should be 100% Rodgers stock.
Code:
fastboot boot yourcustomrecovery.img
You can only use this method to boot a recovery without installing it, if on hboot 1.44, so that is why I recommend using the RUU to downgrade all that stuff for you.
Let me know if you need more help. I'd be happy to guide you.
Crush
PS - Love your Avatar. You should change your location to "Parts Unknown" to complete the joke. I may have to bust out a Conky avatar now!
Click to expand...
Click to collapse
Hey, I'm trying to do the same thing as OP, and this thread has been the closest thing to my issue. I'm trying to return everything on my phone to stock, however my Canadian carrier is Bell. Currently my HTC One has the bootloader unlocked, is rooted, TWRP recovery, and TrickDroid installed.
If I understand your instructions correctly, what I should do (given I want to restore using a nandroid backup) is:
1) S-Off my phone
2) Change the CID to CWS___001 and run the ATT RUU
3) Change the CID back to my original (BM_001 is what I think it is, do you know how I can make sure? What command to run for ADB?)
4) The Nandroid backup from http://forum.xda-developers.com/showthread.php?t=2207874&highlight=bell+update for my phone is for CWM (it's this one: M7 CWM Nandroid Backup / CID BM___001 / 1.29.666.5), does that mean I have to change my recovery from TWRP to CWM at this point?
5) Use fastboot to boot the recovery --> two questions regarding this, 1) why would I not install the .zip I downloaded from step 4? 2) where do I get the recovery.img? Just the one that is in the zip? In which case, shouldn't I also has to boot the boot.img or anything else?
6) I also want to upgrade the radio, should that be done last?
Thanks for all your help!
Lastly, I'm looking for a ROM to flash afterwards, I was wondering if you had any suggestions/know of a ROM that can allow me to use the swipe2sleep features, as well as hold the back touch button to force kill an app.
Just sell it on swappa. They love rooted unlocked modded phones.

[Q] Want To Turn AT&T HTC One Into Developer's Edition

Hello everyone!
I have an AT&T HTC One that is S-Off, relocked, SuperCID, black HBoot 1.54, currently on ViperOne 2.7 with stock kernel. I've been trying for the past day and a half to get the 3.22.1540.1 Brightstar WWE to run so I could have it back to stock with the most current OS. I also want to fully convert it to a Developer's Edition phone as well. I thought that with SuperCID you could run any RUU but so far every single time it ends in an error. I also tried changing the CID to the Developer's Edition CID (BS_US001) and still came back with the same error. So here I am on the greatest place in the world for Android phone assistance and advice asking for help in getting my phone converted to a Developer's Edition and/or on the 3.22 RUU. Thanks in advance for any help.
P.S. I already did try to search like crazy for the answers to my questions.!
Well you may need a stock recovery to run an ruu.exe. And I'd recommend going back to super-cid and then running the ruu as well. Be sure you back up all your information that you do then wish to lose, as the ruu will format the entire phone.
Sent from my HTC One using Tapatalk 4
Willieumm said:
Hello everyone!
I have an AT&T HTC One that is S-Off, relocked, SuperCID, black HBoot 1.54, currently on ViperOne 2.7 with stock kernel. I've been trying for the past day and a half to get the 3.22.1540.1 Brightstar WWE to run so I could have it back to stock with the most current OS. I also want to fully convert it to a Developer's Edition phone as well. I thought that with SuperCID you could run any RUU but so far every single time it ends in an error. I also tried changing the CID to the Developer's Edition CID (BS_US001) and still came back with the same error. So here I am on the greatest place in the world for Android phone assistance and advice asking for help in getting my phone converted to a Developer's Edition and/or on the 3.22 RUU. Thanks in advance for any help.
P.S. I already did try to search like crazy for the answers to my questions.!
Click to expand...
Click to collapse
No need to relock boot loader because the developer edition comes by default unlocked. Unlock it to continue. You need to change your CID to 11111111 (super CID) and you need to flash the 1.44 hboot (I believe) the black hboot may be causing the problem.
Downgrade to the lowest firmware you can find for the Developers edition.
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
(Yes, twice.)
Check to be sure everything was successful.
fastboot reboot-bootloader
Make sure the bootloader is locked.
Run the ruu.
Let it do its thing.
Boot the phone and set it up.
Go to settings - about phone - software information - system update.
Allow it to download and update.
Repeatedly check for update until you reach 4.3
Sent from my HTC One using XDA Premium 4 mobile app
Hi there,
Did you get it work 3.22.1540.1 dev edition on your phone?, im still stuck in the same problem, got an HTC One AT&T, i got working the RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (dev edition), when i check for updates, there's an update of 17mb, after updating that one, i check again and found the 3.22.1540.1 OTA (around 550mb), i downloaded and agree to install it, but when reboot the phone, it got stuck in the HTC logo screen, did not go further, even trying to get into recovery, same thing, got stuck in HTC logo screen.
Another test i did, was installing RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe and even the zip version, both of them install correctly but same problem, got stuck in HTC Logo screen, right now my phone is Unlocked bootloader, S-off with supercid (also tried the BS_US001 CID, same problem), hboot 1.55, is there any chance someone can help me with it? thanks a lot
leca27 said:
Hi there,
Did you get it work 3.22.1540.1 dev edition on your phone?, im still stuck in the same problem, got an HTC One AT&T, i got working the RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe (dev edition), when i check for updates, there's an update of 17mb, after updating that one, i check again and found the 3.22.1540.1 OTA (around 550mb), i downloaded and agree to install it, but when reboot the phone, it got stuck in the HTC logo screen, did not go further, even trying to get into recovery, same thing, got stuck in HTC logo screen.
Another test i did, was installing RUU_M7_UL_JB43_SENSE50_MR_BrightstarUS_WWE_3.22.1540.1.exe and even the zip version, both of them install correctly but same problem, got stuck in HTC Logo screen, right now my phone is Unlocked bootloader, S-off with supercid (also tried the BS_US001 CID, same problem), hboot 1.55, is there any chance someone can help me with it? thanks a lot
Click to expand...
Click to collapse
go into stock recovery and do a factory reset ..it should boot then

[Q] update issue

Hello all I am a noob getting into the game, I am trying to get my m7 to update with no luck. I have an AT&T branded One running on versio 1.26.502.15 . I have tried all the little tricks to get it to find them, but nadda. I have been reading into all the resets, RUUs, and OTAs and honestly I'm just more confused. From what I read about manually installing OTAs, I haven't been able to find the right one to upgrade my version. I just want to get up to date with Android and Sense. If anybody could just point me in the right direction I would be so thankful. If there's any other info needed I'll get it up here.
Locked
S_on
Hboot 1.44
Android v.1.26.502.15
Sense 5.0
dirtrider129 said:
Hello all I am a noob getting into the game, I am trying to get my m7 to update with no luck. I have an AT&T branded One running on versio 1.26.502.15 . I have tried all the little tricks to get it to find them, but nadda. I have been reading into all the resets, RUUs, and OTAs and honestly I'm just more confused. From what I read about manually installing OTAs, I haven't been able to find the right one to upgrade my version. I just want to get up to date with Android and Sense. If anybody could just point me in the right direction I would be so thankful. If there's any other info needed I'll get it up here.
Locked
S_on
Hboot 1.44
Android v.1.26.502.15
Sense 5.0
Click to expand...
Click to collapse
do you have adb and fastboot installed on your computer? If yes, post the output of fastboot getvar all except the imei # and the serialno #
at&t phone must be connected to the at&t network to receive ota update, are you on at&t?
manually installing ota update require s-off, your phone is currently s-on. good new is its "pretty easy" to s-off on hboot 1.44, ok maybe not that easy for a new user but you should be able to s-off if you need to by following revone s-off guide.
if you are not on at&t network:
easiest solution (imo):
unlock the bootloader (this void warranty)
flash twrp recovery 2.6.3.3
flash the guru reset rom 5.12.502.2
or
more complicated but better (imo):
unlock bootloader
flash twrp recovery 2.6.3.3
root
s-off using revone
flash the latest ruu (4.18.502.7)
manually flash ota updates from 4.18.502.7 to 5.12.502.2
update issue
Thank you for the info I don't have adb fastboot installed guess I'll need to start there, I am using the new cricket gsm network which if I'm correct uses AT&T towers but I guess that's why I was unable to get the updates because I'm not actually on AT&T. Will I still need to get s-off with the first solution or not ? Thanks again for the help, I'll get on it and let you know how it goes.
dirtrider129 said:
Thank you for the info I don't have adb fastboot installed guess I'll need to start there, I am using the new cricket gsm network which if I'm correct uses AT&T towers but I guess that's why I was unable to get the updates because I'm not actually on AT&T. Will I still need to get s-off with the first solution or not ? Thanks again for the help, I'll get on it and let you know how it goes.
Click to expand...
Click to collapse
alray said:
do you have adb and fastboot installed on your computer? If yes, post the output of fastboot getvar all except the imei # and the serialno #
at&t phone must be connected to the at&t network to receive ota update, are you on at&t?
manually installing ota update require s-off, your phone is currently s-on. good new is its "pretty easy" to s-off on hboot 1.44, ok maybe not that easy for a new user but you should be able to s-off if you need to by following revone s-off guide.
if you are not on at&t network:
easiest solution (imo):
unlock the bootloader (this void warranty)
flash twrp recovery 2.6.3.3
flash the guru reset rom 5.12.502.2
or
more complicated but better (imo):
unlock bootloader
flash twrp recovery 2.6.3.3
root
s-off using revone
flash the latest ruu (4.18.502.7)
manually flash ota updates from 4.18.502.7 to 5.12.502.2
Click to expand...
Click to collapse
Could you tell me where to find the 5.12.502.2 reset Rom, I went to HTC guru and could not find it in the list, also what are your thoughts on the twrp 2.7, I read a few comments about it and seemed like people were having trouble with it on their One's, I wondered if it would be better to have the new version or if I should just stick with the other one. Thanks again for the help.
dirtrider129 said:
Could you tell me where to find the 5.12.502.2 reset Rom, I went to HTC guru and could not find it in the list, also what are your thoughts on the twrp 2.7, I read a few comments about it and seemed like people were having trouble with it on their One's, I wondered if it would be better to have the new version or if I should just stick with the other one. Thanks again for the help.
Click to expand...
Click to collapse
http://www.htc1guru.com/dld/guru_reset_m7_5-12-502-2_clsa-zip/
better to stick with 2.6.3.3 or 2.6.3.4 unless you want to experiment. there is a charging bug with 2.7.0.0 and it looks like there are also some other bugs with 2.7.1.0 for flashing roms, not sure if it was solved in 2.7.1.1. use 2.6.3.3 or .3.4 and youll be fine.
and no, you dont need s-off to use the reset rom. but a reset rom will not update all the firmware, you'll get an updated rom(software), on the hardware side, only recovery and radio will be updated (if you choose to flash stock radio and recovery at the reset rom installation). hboot will not be updated using this solution.
do a nandroid backup of your current config, just in case you need to restore if something goes wrong.
update question
[/Quote]better to stick with 2.6.3.3 or 2.6.3.4 unless you want to experiment. there is a charging bug with 2.7.0.0 and it looks like there are also some other bugs with 2.7.1.0 for flashing roms, not sure if it was solved in 2.7.1.1. use 2.6.3.3 or .3.4 and youll be fine.
and no, you dont need s-off to use the reset rom. but a reset rom will not update all the firmware, you'll get an updated rom(software), on the hardware side, only recovery and radio will be updated (if you choose to flash stock radio and recovery at the reset rom installation). hboot will not be updated using this solution.
do a nandroid backup of your current config, just in case you need to restore if something goes wrong.[/QUOTE]
After lots and lots of research into this before doing I've decided to go with viperone custom Rom, if I understand it right I won't have to mess with s-off for this,please correct me if I'm wrong. But I have found some conflicting instructions, I read somewhere that I will have to copy the boot.img from the Rom and flash it before flashing the Rom then others without that step, so I'm confused, I wanna male sure I do this right the first time. Also are there any files that I need to have updated before flashing a 4.4 sense 6 custom Rom or will it all be included in the Rom?
Thank you
Dirtrider
Hi there
Been a long time since I've posted and hope I'm in the right place. Did a search for my question and wound up here.
My phone is stock and s-on, I haven't done anything to it, it's exactly the same as when it came out the box, but I haven't been able to update the software in settings>about>software updates for a while now, it just keeps coming back with download unsuccessful. Any ideas how I can sort this, or do it another way?
Thanks in advance
Sent from my HTC One using XDA Free mobile app

htc m7 serious help needed

hello all,
i am having problem with m7_ul cid tmob101
according to customer he tried to unlock it with sieempi methos and installed philz recovery and accidentaly format the system partition of phone
now the problem is phone is at latest version 4.4.2 i think. No ROM available for this version i think
i tried all possible things to recover the phone like bootloader unlock, custom recovery, sideload rom installing etc etc
always signature error, may be CID missmatch or hboot lower version...
need serious help in this phone
phone original info is:
HBOOT:1.57.000
MAIN OS: 5.14.531
RADIO: 4T.XXX.
TMOB USA BRANDED
NEED GUIDANCE TO REVIVE MY PHONE...
gurinder
If you're trying to return to stock, here is a complete stock tutorial. youtube.c om/watch?v=uEBAKSDxbkI. I hope that helps.
@gurinder Go to the T-Mobile HTC One forum and search for the latest RUU 5.14.531. Then run the RUU. I would provide the link but I'm not at the computer.
i have not found this firmware as RUU or zip.. i think this verison is OTA and none of other version installing on phones coz of hboot higher version.. need help in this.. i tried those both tmob firmware available on forum. always signature error or error 155 ( tries in both ways) bootloader unlocked and locked with cutom recovery and original stock recovery
any help guys
thanu guys i found the stock rom and paid for and my phone ok now.. thnx all for help

[Q] Bootloop and various troubles and doubts

Hi! I recently get the M7 wls Sprint variant from aliexpress. When I turn on the phone it works good until start rebooting. It comes with 4.4.2 and Sense 6. Bootloader is Locked.
S-Off.
HBOOT -1.57.000
RADIO -2.03.30.0109
Cid -11111111
Stock recovery
I think is rooted because it have superuser aplication. When it start to rebooting I decide to make a Factory reset. Now the phone boots and don't pass the Htc logo.
I need to install the Ruu file for the Sprint version? It will change the cid and hboot and radio numbers?
I want my phone rooted with the cid-11111111 to flash any custom rom.
What thing recommend to do first? Thanks. I have a bad english. Sorry.
You maybe have to find the kernel file for that phone download it and after you flash the stock romantic to the phone flash it with the kernel that should kick it back on. If that doesn't work you have to repartition the phone then flash it with the stock romantic then with the kernal. That's how it works with android using Odin.
Juan_Dominguez said:
Hi! I recently get the M7 wls Sprint variant from aliexpress. When I turn on the phone it works good until start rebooting. It comes with 4.4.2 and Sense 6. Bootloader is Locked.
S-Off.
HBOOT -1.57.000
RADIO -2.03.30.0109
Cid -11111111
Stock recovery
I think is rooted because it have superuser aplication. When it start to rebooting I decide to make a Factory reset. Now the phone boots and don't pass the Htc logo.
I need to install the Ruu file for the Sprint version? It will change the cid and hboot and radio numbers?
I want my phone rooted with the cid-11111111 to flash any custom rom.
What thing recommend to do first? Thanks. I have a bad english. Sorry.
Click to expand...
Click to collapse
Flashing a RUU will not change your CID and supercid isn't required to flash custom rom. Don'T forget that since you ave a sprint M7 (WLS) you can only flash roms that was made for the WLS version. If you are planning to use custom roms, I wouldn't bother with flashing a RUU and simply flash a custom recovery and a custom rom. All roms for sprint version can be found in the sprint htc one forum (not here in the gsm forum). You also have to use a custom recovery (twrp or cwm) made for the wls variant, not the version for the standard htc one (M7_U/UL).
If you want to flash a RUU, pleas post the output of "fastboot getvar all" so we can help you find the correct one and make sure everything is fine before flashing. (don't post your IMEI / MEID / Serialno)
alray said:
Flashing a RUU will not change your CID and supercid isn't required to flash custom rom. Don'T forget that since you ave a sprint M7 (WLS) you can only flash roms that was made for the WLS version. If you are planning to use custom roms, I wouldn't bother with flashing a RUU and simply flash a custom recovery and a custom rom. All roms for sprint version can be found in the sprint htc one forum (not here in the gsm forum). You also have to use a custom recovery (twrp or cwm) made for the wls variant, not the version for the standard htc one (M7_U/UL).
If you want to flash a RUU, pleas post the output of "fastboot getvar all" so we can help you find the correct one and make sure everything is fine before flashing. (don't post your IMEI / MEID / Serialno)
Click to expand...
Click to collapse
Hi! But if I had the Cid-11111111 can install any rom of any carrier right? I can install a custom rom without unlock the bootloader? I cannot have acces on the phone. So I dont know if the developer options and the usb depuration is enabled...

Categories

Resources